Profile image of Guy Littlefair

Prof Guy Littlefair

STAFF PROFILE

Position

Visitor

Faculty

Office of DVC (Research)

Department

Office of DVC (Research)

Campus

Geelong Waurn Ponds Campus

Contact

Biography

Professor Guy Littlefair is the Dean of Engineering in the Faculty of Science, Engineering and the Built Environment at Deakin University in Australia, having been appointed as chair in Engineering in January 2011.

Professor Littlefair is internationally regarded as an expert in the field of machining, having lead teams of researchers in England, New Zealand and now Australia focusing on the machinability of materials. In these leadership capacities Professor Littlefair has worked with some of the world’s most innovative research-led manufacturing organizations, including Rolls Royce, DeBeers, Toyota and Land Rover.

In an initiative applauded by Engineers Australia, Professor Littlefair is also the visionary architect of the $55 million Centre for Advanced Design in Engineering Training (CADET) at Deakin University, with Commonwealth Government funding through the Education Investment Fund.

Read more on Guy's profile

Publications

Filter by

2017

Industry-University Collaboration: Improving Quality in Engineering Education

S Chandrasekaran, M Joordens, G Littlefair, A Stojcevski

(2017), European Journal of Engineering Education, C1

journal

Materials machining study of titanium alloy using a high speed camera

A Polishetty, G Littlefair, S Tumma

(2017), Vol. 723, pp. 171-176, Key engineering materials, Zurich, Switzerland, C1

journal

Experimental and finite element analysis of machinability of AL-6XN super austenitic stainless steel

M Alabdullah, A Polishetty, J Nomani, G Littlefair

(2017), Vol. 91, pp. 501-516, International journal of advanced manufacturing technology, Berlin, Germany, C1

journal

Effect of microstructure on chip formation during machining of super austenitic stainless steel

M Alabdullah, A Polishetty, J Nomani, G Littlefair

(2017), Vol. 4, pp. 1-18, International journal of materials forming and machining processes, Hershey, Pa., C1

journal

Stagnation zone during the turning of Duplex SAF 2205 stainless steels alloy

J Nomani, A Pramanik, T Hilditch, G Littlefair

(2017), Vol. 32, pp. 1486-1489, Materials and manufacturing processes, Abingdon, Eng., C1

journal

Production of Ti-6Al-4V acetabular shell using selective laser melting: possible limitations in fabrication

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2017), Vol. 23, pp. 110-121, Rapid prototyping journal, Bingley, Eng., C1

journal

Fatigue life of machined components

A Pramanik, A Dixit, S Chattopadhyaya, M Uddin, Y Dong, A Basak, G Littlefair

(2017), Vol. 5, pp. 59-76, Advances in Manufacturing, Shanghai, China, C1

journal

On the role of different annealing heat treatments on mechanical properties and microstructure of selective laser melted and conventional wrought Ti-6Al-4V

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2017), Vol. 23, pp. 295-304, Rapid prototyping journal, Bingley, United Kingdom, C1

journal

Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys - A review

A Pramanik, A Basak, Y Dong, P Sarker, M Uddin, G Littlefair, A Dixit, S Chattopadhyaya

(2017), Vol. 101, pp. 1-29, Composites Part A: Applied Science and Manufacturing, Oxford, Eng., C1-1

journal

Chip formation characteristics of selective laser melted Ti-6Al-4V

M Shunmugavel, M Goldberg, A Polishetty, J Nomani, S Sun, G Littlefair

(2017), pp. 1-18, Australian journal of mechanical engineering, Crows Nest, N.S.W., C1

journal
2016

Investigation on the effect of cutting fluid pressure on surface quality measurement in high speed thread milling of brass alloy (C3600) and aluminium alloy (5083)

A Khorasani, I Gibson, M Goldberg, E Doeven, G Littlefair

(2016), Vol. 82, pp. 55-63, Measurement: journal of the international measurement confederation, Amsterdam, The Netherlands, C1

journal

Current trends in machinability research

A Polishetty, G Littlefair, M Goldberg, J Nomani

(2016), Vol. 3, pp. 1-11, International journal of materials forming and machining processes, Hershey, P.A., C1

journal

Investigation on the behavior of austenite and ferrite phases at stagnation region in the turning of duplex stainless steel alloys

J Nomani, A Pramanik, T Hilditch, G Littlefair

(2016), Vol. 47, pp. 3165-3177, Metallurgical and materials transactions a, New York, N.Y., C1

journal

A survey on mechanisms and critical parameters on solidification of selective laser melting during fabrication of Ti-6Al-4V prosthetic acetabular cup

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2016), Vol. 103, pp. 348-355, Materials and design, Amsterdam, The Netherlands, C1

journal

Collaborative learning experience of students in distance education

S Chandrasekaran, P Badwal, G Thirunavukkarasu, G Littlefair

(2016), pp. 90-99, PAEE/ALE 2016 : 8th International Symposium on Project Approaches in Engineering Education and 14th Active Learning in Engineering Education Workshop, Guimaraes, Portugal, E1

conference

Wire EDM mechanism of MMCs with the variation of reinforced particle size

A Pramanik, G Littlefair

(2016), Vol. 31, pp. 1700-1708, Materials and manufacturing processes, Abingdon, Eng., C1

journal

An improved static model for tool deflection in machining of Ti-6Al-4V acetabular shell produced by selective laser melting

A Khorasani, I Gibson, N Godarzvand Chegini, M Goldberg, A Ghasemi, G Littlefair

(2016), Vol. 92, pp. 534-544, Measurement: journal of the International Measurement Confederation, Amsterdam, The Netherlands, C1

journal

Tool wear and surface integrity analysis of machined heat treated selective laser melted Ti-6Al-4V

M Shunmugavel, A Polishetty, M Goldberg, R Singh, G Littlefair

(2016), Vol. 3, pp. 50-63, International journal of materials forming and machining processes, Hershey, P.A., C1

journal

Microstructural and surface texture analysis due to machining in Super Austenitic Stainless Steel

M Alabdullah, A Polishetty, G Littlefair

(2016), Vol. 2016, pp. 1-8, Journal of metallurgy, Cairo, Egypt, C1

journal

Object slippage prevention using different control strategies

P Dzitac, A Mazid, G Littlefair, A Polishetty

(2016), Vol. 1, pp. 559-566, ICINCO 2016 : Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics, Lisbon, Portugal, E1

conference

Impacts of wear and geometry response of the cutting tool on machinability of super austenitic stainless steel

M Alabdullah, A Polishetty, G Littlefair

(2016), Vol. 2016, pp. 1-9, International journal of manufacturing engineering, New York, N.Y., C1

journal

Metallurgical and machinability characteristics of wrought and selective laser melted Ti-6Al-4V

M Shunmugavel, A Polishetty, J Nomani, M Goldberg, G Littlefair

(2016), Vol. 2016, pp. 1-10, Journal of metallurgy, New York, N.Y., C1

journal

Framework guidelines for students - collaborative learning in distance education

S Chandrasekaran, P Badwal, G Littlefair, M Mühlfelder

(2016), Vol. 6, pp. 940-951, Journal of modern education review, New York, N.Y., C1

journal

Machinability of metallic and ceramic biomaterials : a review

A Khorasani, I Gibson, M Goldberg, J Nomani, G Littlefair

(2016), Vol. 8, pp. 1491-1511, Science of advanced materials, Stevenson Ranch, Cal., C1

journal

Cutting force and surface finish analysis of machining additive manufactured titanium alloy Ti-6Al-4V

A Polishetty, M Shunmugavel, M Goldberg, G Littlefair, R Singh

(2016), Vol. 7, pp. 284-289, Procedia manufacturing, Amsterdam, The Netherlands, C1

journal

Evaluating student perceptions in peer to peer learning and assessment practices in design based learning environment

A Polishetty, G Littlefair, A Patil

(2016), Vol. 5, pp. 1-11, International journal of quality assurance in engineering and technology education (IJQAETE), Hershey, Pa., C1

journal
2015

A protocol for improving fabrication yield of thin SU-8 microcantilevers for use in an aptasensor

Y Lim, A Kouzani, A Kaynak, X Dai, G Littlefair, W Duan

(2015), Vol. 21, pp. 371-380, Microsystem technologies, Berlin, Germany, C1

journal

Machining of titanium alloy (Ti-6Al-4V)-theory to application

A Pramanik, G Littlefair

(2015), Vol. 19, pp. 1-49, Machining science and technology, Oxford, Eng., C1

journal

Project oriented design based learning in engineering education

S Chandrasekaran, G Littlefair, A Stojcevski

(2015), pp. 45-48, PBL 2015 : Research and practice in problem-based learning : Proceedings of the 4th International Problem-Based Learning Symposium, Singapore, E1

conference

Chip formation mechanism and machinability of wrought duplex stainless steel alloys

J Nomani, A Pramanik, T Hilditch, G Littlefair

(2015), Vol. 80, pp. 1127-1135, International journal of advanced manufacturing technology, New York, N.Y., C1

journal

Weldability of duplex stainless steel

A Pramanik, G Littlefair, A Basak

(2015), Vol. 30, pp. 1053-1068, Materials and manufacturing processes, Oxford, Eng., C1

journal

Staff and students views on industry-university collaboration in engineering

S Chandrasekaran, G littlefair, A Stojcevski

(2015), Vol. 8, pp. 13-19, International journal of advanced corporate learning, Wien, Austria, C1

journal

Improving student-industry engagement through project oriented curriculum

S Chandrasekaran, G Littlefair, A Stojcevski

(2015), pp. 1-7, SEFI 2015 : Proceedings of the 43rd SEFI Annual Conference, Orleans, France, E1

conference

Learning and teaching guidelines for engineering students and staff in project/design based learning

S Chandrasekaran, G Littlefair, A Stojcevski

(2015), pp. 21-28, PAEE 2015 : Proceedings of the 7th International Symposium on Project Approaches in Engineering Education, San Sebastian, Spain, E1

conference

Students and staff perceptions of project/design based learning in an engineering curriculum

S Chandrasekaran, G Littlefair, A Stojcevski

(2015), pp. 379-386, IRSPBL 2015 : Proceedings of the 5th International Research Symposium on PBL, San Sebastian, Spain, E1

conference

The role of the facilitator in a project/design based learning environment

S Chandrasekaran, G Littlefair, A Stojcevski

(2015), pp. 21-24, ICL 2015 : Proceedings of the International Conference on Interactive Collaborative Learning, Florence, Italy, E1

conference

Electrical discharge machining of 6061 aluminium alloy

A Pramanik, A Basak, M Islam, G Littlefair

(2015), Vol. 25, pp. 2866-2874, Transactions of nonferrous metals society of China, Amsterdam, The Netherlands, C1

journal

Microstructure and mechanical properties of wrought and additive manufactured Ti-6Al-4V cylindrical bars

M Shunmugavel, A Polishetty, G Littlefair

(2015), Vol. 20, pp. 231-236, Procedia technology, Amsterdam, The Netherlands, C1

journal

Titanium in biomedical applications-properties and fabrication: a review

A Khorasani, M Goldberg, E Doeven, G Littlefair

(2015), Vol. 5, pp. 593-619, Journal of biomaterials and tissue engineering, Valencia, Calif., C1

journal

Project-oriented design-based learning in engineering education

S Chandrasekaran, G Littlefair, A Stojcevski

(2015), pp. 16-21, Reflections on problem-based learning, Singapore, C1

journal

Weldability and machinability of duplex stainless steel

A Pramanik, A Basak, J Nomani, G Littlefair, M Islam, V Anandakrishnan

(2015), pp. 207-238, Stainless steel : microstructure, mechanical properties and methods of application, New York, N.Y., B1

chapter

A preliminary study on machinability of super austenitic stainless steel

A Polishetty, M Alabdullah, N Pillay, G Littlefair

(2015), Vol. 2A, pp. 1-8, IMECE 2015 : Advanced Manufacturing : Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Houston, Texas, E1

conference

Machinability assessment of multi component high entropy alloys

A Polishetty, M Barla, G Littlefair, D Fabijanic

(2015), pp. 41-45, METMG 2015 : Proceedings of the Manufacturing Engineering and Technology for Manufacturing Growth 2015 International Conference, Vancouver, B.C., E1

conference
2014

Distance Education and On-campus Students Perceptions of Collaborative Learning in Engineering

Sivachandran Chandrasekaran, Guy Littlefair, Matthew Joordens, Alex Stojcevski

(2014), pp. 55-60, ICEEE 2014 : Proceedings of the E-Learning and E-Technologies in Education 2014 International Conference, The Society of Digital Information and Wireless Communication, E1

conference

CLOUD-LINKED AND CAMPUS-LINKED STUDENTS'PERCEPTIONS OF COLLABORATIVE LEARNING AND DESIGN BASED LEARNING IN ENGINEERING

Sivachandran Chandrasekaran, Guy Littlefair, Matthew Joordens, Alex Stojcevski

(2014), Vol. 4, pp. 1-9, International Journal of Digital Information and Wireless Communications (IJDIWC), C1

journal

A Comparative Study of Staff Perspectives on Design Based Learning in Engineering Education

Sivachandran Chandrasekaran, Guy Littlefair, Matthew Joordens, Alex Stojcevski

(2014), C1

journal

Machinability assessment of titanium alloy Ti-6Al-4V for biomedical applications

A Polishetty, G Littlefair, K Praveen Kumar

(2014), Vol. 941-944, pp. 1985-1990, Advanced materials research, Lausanne, Switzerland, C1

journal

Recent advances in machining of Austempered Ductile Iron to avoid machining induced microstructural phase transformation reaction

A Polishetty, G Littlefair

(2014), Vol. 1, pp. 1-7, ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014; Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference, Detroit, MI, E1

conference

Aligning Engineering Design Education with Accreditation Requirements

Sivachandran Chandrasekaran, Aman Oo, Guy Littlefair, Alex Stojcevski

(2014), Vol. 3, pp. 110-121, International Journal of Quality Assurance in Engineering and Technology Education (IJQAETE), Pa, United States, C1

journal

The effective radius and resistance to slippage

P Dzitac, A Md Mazid, G Littlefair, A Polishetty

(2014), Vol. 2, pp. 396-401, ICINCO 2014 - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics, Vienna, Austria, E1

conference

Robotic grasping and manipulation controller framework: architecture redevelopment

P Dzitac, A Md Mazid, G Littlefair, A Polishetty

(2014), Vol. 2, pp. 368-373, Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics; ICINCO 2014, Vienna, Austria, E1

conference

Developments in machining of stacked materials made of CFRP and titanium/aluminum alloys

A Pramanik, G Littlefair

(2014), Vol. 18, pp. 485-508, Machining science and technology: an international journal, New York, NY, C1

journal

Enhancing student learning outcomes in manufacturing engineering through design based learning

A Polishetty, S Chandrasekaran, M Goldberg, G Littlefair, J Steinwedel, A Stojcevski

(2014), pp. 1-12, AAEE 2014 : Assessment and Learning for Engineering : Proceedings of the Australasian Association for Engineering Education Conference and IEEE International Conference on Teaching, Wellington, NewZealand, E1

conference

First year electronics not only for first year electronics students - how to ensure engagement through innovation

B Horan, S Chandrasekaran, A Stojcevski, G Littlefair

(2014), pp. 1-8, AAEE 2014 : Proceedings of the 2014 Australasian Association for Engineering Education Conference, Wellington, NewZealand, E1

conference

Students and Staff Perspectives on Academic-Industry Partnerships in Engineering

S Chandrasekaran, M Joordens, G Littlefair, A Stojcevski

(2014), pp. 266-271, 17th International Conference on Interactive Collaborative Learning 2014 World Engineering Education Forum, Dubai, UAE, E1

conference

Theoretical modeling and experimental validation of surface stress in thrombin aptasensor

Y Lim, A Kouzani, A Kaynak, X Dai, G Littlefair, W Duan

(2014), Vol. 13, pp. 384-391, IEEE Transactions on Nanobioscience, Piscataway, N. J, C1

journal

Review of vibration assisted machining of titanium and nickel alloys

M Shunmugavel, A Polishetty, R Singh, G Littlefair

(2014), pp. 1-6, ICMMM 2014 : Proceedings of the International Colloquium on Materials, Manufacturing and Metrology, Madras, India, E1-1

conference

Comparative assessment on machinability of nano-structured bainitic steel and titanium64

A Polishetty, C Sonavane, P Patil, G Littlefair

(2014), Vol. 02, pp. 34-39, Journal of materials science and chemical engineering, Irvine, CA, C1

journal
2013

Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds

Z Chen, S Yazdanian, G Littlefair

(2013), Vol. 48, pp. 2624-2634, Journal of materials science, Berlin, Germany, C1

journal

Machinability study of first generation duplex (2205), second generation duplex (2507) and austenite stainless steel during drilling process

J Nomani, A Pramanik, T Hilditch, G Littlefair

(2013), Vol. 304, pp. 20-28, Wear, Amsterdam, The Netherlands, C1

journal

Project-oriented design-based learning: aligning students' views with industry needs

S Chandrasekaran, A Stojcevski, G Littlefair, M Joordens

(2013), Vol. 29, pp. 1109-1118, International journal of engineering education, Great Britain, C1

journal

On quantifying the strain rate during chip formation when machining aerospace alloy Ti-5553

D Yan, T Hilditch, H Kishawy, G Littlefair

(2013), Vol. 8, pp. 123-128, Procedia CIRP 8, Amsterdam, The Netherlands, C1

journal

A case study on effect of feed rate on machinability of austempered ductile iron

A Polishetty, G Littlefair, T Pasang

(2013), Vol. 748, pp. 247-251, Advanced materials research, Stafa-Zurich, Switzerland, C1

journal

Fabrication of nano-particle reinforced metal matrix composites

A Pramanik, G Littlefair

(2013), Vol. 651, pp. 289-294, Advanced materials research, Stafa-Zurich, Switzerland, C1

journal

Machining and tool wear mechanisms during machining titanium alloys

A Pramanik, M Islam, A Basak, G Littlefair

(2013), Vol. 651, pp. 338-343, Advanced materials research, Stafa-Zurich, Switzerland, C1

journal

Accreditation Inspired Project Oriented Design Based Learning curriculum for Engineering Education

Sivachandran Chandrasekaran, Alex Stojcevski, Guy Littlefair, Matthew Joordens

(2013), IETEC 2013 : Enhancing Global Engineering and Technology Education: Meeting the Future : Proceedings of the 2nd International Engineering and Technology Education Conference 2013, E1

conference

Best assessment practices of final year engineering projects in Australia

S Handrasekaran, A Oo, A Stojcevski, G Littlefair

(2013), pp. 1-17, IETEC 2013 : Proceedings of the International Engineering and Technology Education Conference 2013, Ho Chi Minh City, Vietnam, E1

conference

Project Oriented Design Based Learning-Staff Perspectives

Sivachandran Chandrasekaran, Alex Stojcevski, Guy Littlefair, Matthew Joordens

(2013), pp. 389-389, Proceedings of 4th International Research Symposium on PBL; IRSPBL 2013, Malaysia, E1

conference

Aligning students and staff perspectives in an engineering design curriculum

Sivachandran Chandrasekaran, Alex Stojcevski, Guy Littlefair, Matthew Joordens

(2013), REES 2013 : Proceedings of the 2013 Research in Engineering Education Symposium, Universiti Teknologi Malaysia, E1

conference

Design based learning-student's views on industry requirements

Sivachandran Chandrasekaran, Alex Stojcevski, Guy Littlefair, Matthew Joordens

(2013), pp. ID-56, Proceedings of 5th International Symposium on Project Approaches in Engineering Education; PAEE 2013, Eindhoven University of Technology, E1

conference

A comparative study of students' perceptions of Project Oriented Design Based Learning in Engineering education

S Chandrasekaran, A Stojcevski, G Littlefair, M Joordens

(2013), pp. 1-9, AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, Gold Coast, Qld, E1

conference

Machinability and phase transformation study of nanobainite steels

C Sonavane, A Polishetty, G Littlefair

(2013), pp. 41-45, ASME District F-ECTC 2013 : Proceedings of the ASME District F- Early Career technical conference, Birmingham, Alabama, E1

conference

Machinability assessment of Ti-6Al-4V for aerospace applications

A Polishetty, V Manoharan, G Littlefair, C Sonavane

(2013), pp. 53-58, ASME District F-ECTC 2013 : Proceedings of the ASME District F- Early Career technical conference, Birmingham, Alabama, E1

conference

A preliminary study on machinability assessment of nanobainite steel

A Polishetty, G Littlefair, T Musselwhite, C Sonavane

(2013), pp. 1-6, IMECE 2013 : Advanced Manufacturing : Proceedings of the ASME International Mechanical Engineering Congress & Exposition, San Diego, California, USA, E1

conference
2012

Effects of friction stir lap welding parameters on weld features on advancing side and fracture strength of AA6060-T5 welds

S Yazdanian, Z Chen, G Littlefair

(2012), Vol. 47, pp. 1251-1261, Journal of materials science, Secaucus, N. J., C1-1

journal

Tensile ductility of electron beam welded titanium alloys

T Pasang, J Sabol, W Misiolek, R Mitchell, A Short, G Littlefair

(2012), Vol. 713, pp. 133-138, Materials science forum, Stafa-Zurich, Switzerland, C1

journal

Learning through Projects in Engineering Education

S Chandrasekaran, A Stojcevski, G Littlefair, M Joordens

(2012), SEFI 2012 : Engineering Education 2020 : Meet The Future : Proceedings of the 40th SEFI Annual Conference 2012, E1

conference

Metallurgy and deformation of electron beam welded similar titanium alloys

T Pasang, J Sabol, W Misiolek, R Mitchell, A Short, G Littlefair

(2012), pp. 982-990, AIP Conference Proceedings, Cadiz, Spain, E1

conference

Current distribution and Lorentz field modelling using cathode designs : a parametric approach

S Das, G Littlefair

(2012), pp. 847-851, TMS 2012 : Light metals 2012 : proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012, Orlando, Fla., E1

conference

The process of design based learning: A students' perspective

Matthew Joordens, Sivachandran Chandrasekaran, Alex Stojcevski, Guy Littlefair

(2012), pp. 927-927, AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, E1

conference

CADET - Centre for Advanced Design in Engineering Training

G Littlefair, A Stojcevski

(2012), pp. 935-942, AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, Melbourne, Vic., E1

conference
2011

Characteristics of electron beam welded Ti & Ti alloys

R Mitchell, A Short, T Pasang, G Littlefair

(2011), Vol. 275, pp. 81-84, Advanced materials research, Stafa-Zurich, Switzerland, C1-1

journal

Effect of tool speeds during friction stir lap welding on mode of fracture and fracture strength of Al 6060-T5 joints

S Yazdanian, Z Chen, G Littlefair

(2011), Vol. 275, pp. 77-80, Advanced materials research, Stafa-Zurich, Switzerland, C1-1

journal

Fracture strengths of Mg alloy AZ31B-H24 friction stir lap welds

Z Chen, S Yazdanian, G Littlefair

(2011), Vol. 275, pp. 73-76, Advanced materials research, Stafa-Zurich, Switzerland, C1-1

journal

Study of phase transformation and work hardening phenomenon during drilling of Ti-5553 and Ti-64

D Yan, G Littlefair, T Pasang

(2011), Vol. 10, pp. 264-279, International journal of machining and machinability of materials, Geneva, Switzerland, C1

journal

Metallurgical characterization of deformed electron beam welded dissimilar titanium alloys

T Pasang, J Sabol, W Misiolek, R Mitchell, A Short, G Littlefair, A Thome

(2011), pp. 657-661, Steel research international, Germany, C1-1

journal

Deformation induced phase transformation during machining of Ti-5553

D Yan, G Littlefair, T Pasang

(2011), Vol. 2, pp. 633-640, Supplemental proceedings: materials fabrication, properties, characterization, and modeling, Chichester, Eng., B1-1

chapter
2010

Assessment of machining characteristics of austempered ductile iron

A Polishetty, G Littlefair

(2010), Vol. 97-101, pp. 2036-2039, Advanced materials research, Stafa-Zurich, Switzerland, C1-1

journal

Correlation between shoulder flow zone quality and material flow quantity during friction stir welding of thick aluminum section using scroll shoulder tool

D Yan, Z Chen, G Littlefair

(2010), pp. 227-233, General abstracts : materials processing and manufacturing division, Seattle, Wash., E1-1

conference

Material flow forming the shoulder flow zone using scroll shoulder tool during friction stir welding of thick section aluminum alloys

D Yan, G Littlefair, Z Chen

(2010), pp. 323-329, Global innovations in manufacturing of aerospace materials : the 11th MPMD Global Innovations Symposium; TMS 139th Annual Meeting and Exhibition, Seattle, Wash., E1-1

conference

Wear characteristics of ultra-hard cutting tools when machining austempered ductile iron

A Polishetty, M Goldberg, G Littlefair

(2010), Vol. 10, pp. 1-6, International journal of mechanical and mechatronics engineering, Rawalpindi, India, C1-1

journal

Microstructural study on strain induced transformation in austempered ductile iron using heat tinting

A Polishetty, B Pan, T Pasang, G Littlefair

(2010), pp. 239-245, MSEC 2010 : Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, Erie, Pennsylvania, E1-1

conference
2009

A comparative assessment of austempered ductile iron as a substitute in weight reduction applications

A Polishetty, G Littlefair, S Singamneni

(2009), pp. 49-58, MSEC2008 : Proceedings of the ASME International Manufacturing Science and Engineering Conference. Volume 1., Evanston, Ill., E1-1

conference
2008

BE (Hons) final year project assessment - leaving out the subjectiveness

G Littlefair, P Gossman

(2008), pp. 1-6, AAEE 2008 : Proceedings of the 2008 Australasian Association for Engineeering Education conference, Rockhampton, Queensland, E1-1

conference
2007

Evaluation of the thermal behaviour of bevelled cutting inserts using a numerical approach

S Singamneni, D Singh, G Littlefair, O Diegel, O Gupta, A Chattopadhyay

(2007), Vol. 221, pp. 1607-1616, Proceedings of the institution of mechanical engineers part b : journal of engineering manufacture, London, England, C1-1

journal

Developing robust assessment criteria for postgraduate research oriented papers

G Littlefair, P Gossman

(2007), pp. 1-7, AAEE 2007 : Proceedings of the 2007 Australasian Association for Engineeering Education Conference, Melbourne, Victoria, E1-1

conference
2005

Free Search - a comparative analysis

K Penev, G Littlefair

(2005), Vol. 172, pp. 173-193, Information sciences, Philadelphia, Pa., C1-1

journal
2004

A coarse-grained parallel genetic algorithm employing cluster analysis for multi-modal numerical optimisation

Y Yang, J Vincent, G Littlefair

(2004), Vol. 2936, pp. 229-240, Lecture notes in computer science, Berlin, Germany, C1-1

journal
2002

ADI und GGV zerspanen mit know-how

R Wertheim, A Layyous, M Goldberg, G Littlefair

(2002), Vol. 135, pp. 22-22, Werkstatt und betrieb, Munich, Germany, C1-1

journal
1996

On-line tool condition monitoring using artificial neural networks

M Javed, A Hope, G Littlefair, D Adradi, G Smith, B Rao

(1996), Vol. 38, pp. 351-354, Insight : non-destructive testing and condition monitoring, Northampton, England, C1-1

journal

Funded Projects at Deakin

Australian Competitive Grants

Assessing final year engineering projects (FYEPs): ensuring learning and teaching standards and AQF8 outcomes (OLT Ref: ID12-2495)

A/Prof Mohammad Rasul, Prof Alex Stojcevski, Prof Guy Littlefair

OLT Commissioned Projects - Office for learning and Teaching

  • 2014: $4,800

Engineering Pathways for Regional Australia: viable learning platforms built through knowledge partnering

Prof Janelle Allison, Prof Guy Littlefair

OLT Innovation and Development Grants - Office for Learning and Teaching

  • 2016: $4,043
  • 2015: $16,172

Supervisions

Principal Supervisor
2016

Pavel (Paul) Dzitac

Thesis entitled: Object Grasping and Safe Manipulation Using Friction-Based Sensing

Doctor of Philosophy (Engineering), School of Engineering

2015

Junior Nomani

Thesis entitled: Uncovering machinability issues in duplex stainless steels

Doctor of Philosophy (Engineering), School of Engineering

Associate Supervisor
2015

Prasad Patil

Thesis entitled: One-hit machining of titanium alloy (Ti-6al-4v) wall component with trochoidal milling

Master of Engineering, School of Engineering

Phillip Wyld

Thesis entitled: Understanding the Effects of Crevice and Galvanic Corrosion for Seawater Desalination Plants Management

Master of Engineering, School of Engineering

2014

Sivachandran Chandrasekaran

Thesis entitled: Project Oriented Design Based Learning (PODBL) in Engineering Education

Doctor of Philosophy (Engineering), School of Engineering

David Yan

Thesis entitled: Machinability and Material Behaviour during Cutting of Titanium¿5Al¿5Mo¿5V¿3Cr¿0.5Fe

Doctor of Philosophy (Engineering), School of Engineering