Profile image of Mazher Mohammed

Dr Mazher Mohammed

STAFF PROFILE

Position

Senior Research Fellow

Faculty

Faculty of Sci Eng & Built Env

Department

School of Engineering

Campus

Geelong Waurn Ponds Campus

Contact

Publications

Filter by

2018

Augmented patient-specific facial prosthesis production using medical imaging modelling and 3D printing technologies for improved patient outcomes

M Mohammed, B Cadd, G Peart, I Gibson

(2018), Vol. 13, pp. 164-176, Virtual and physical prototyping, Abingdon, Eng., C1

journal

Design of three-dimensional, triply periodic unit cell scaffold structures for additive manufacturing

Mazher Mohammed, Ian Gibson

(2018), Vol. 140, pp. 1-10, Journal of mechanical design, New York, N.Y., C1

journal
2017

Reducing electrowetting-on-dielectric actuation voltage using a novel electrode shape and a multi-layer dielectric coating

M Samad, A Kouzani, M Hossain, M Mohammed, M Zainal Alam

(2017), Vol. 23, pp. 3005-3013, Microsystem technologies, Berlin, Germany, C1

journal

Fabrication of microfluidic devices: improvement of surface quality of CO2 laser machined poly(methylmethacrylate) polymer

M Mohammed, A Kouzani, I Gibson, M Zainal Alam

(2017), Vol. 27, pp. 1-12, Journal of micromechanics and microengineering, Bristol, Eng., C1

journal

Design and fabrication considerations for three dimensional scaffold structures

M Mohammed, P Badwal, I Gibson

(2017), pp. 120-126, DesTech 2016 : Proceedings of the International Conference on Design and Technology, Geelong, Victoria, E1

conference

Advanced auricular prosthesis development by 3D modelling and multi-material printing

M Mohammed, J Tatineni, B Cadd, G Peart, I Gibson

(2017), pp. 37-43, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Vic., E1

conference

Customised design of a patient specific 3D printed whole mandible implant

M Mohammed, A Fitzpatrick, I Gibson

(2017), pp. 104-111, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Vic., E1

conference

A low carbon footprint approach to the reconstitution of plastics into 3D-printer filament for enhanced waste reduction

M Mohammed, M Mohan, A Das, M Johnson, P Badwal, D McLean, I Gibson

(2017), pp. 234-241, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Victoria, E1

conference

Design of a patient specific, 3D printed arm cast

A Fitzpatrick, M Mohammed, P Collins, I Gibson

(2017), pp. 135-142, DesTech 2016: Proceedings of the International Conference on Design and Technology, Geelong, Victoria, E1

conference

EcoPrinting: investigating the use of 100% recycled acrylonitrile butadiene styrene (ABS) for additive manufacturing

M Mohammed, Anirudra Das, Eli Gomez-Kervin, Daniel Wilson, Ian Gibson

(2017), pp. 532-542, SFF 2017 : Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Austin, Tex., E1

conference

Design optimisation of a thermoplastic splint

Angus Fitzpatrick, M Mohammed, Paul Collins, Ian Gibson

(2017), pp. 2409-2418, SFF 2017 : Proceedings of the 28th Annual International 2409 Solid Freeform Fabrication Symposium ? An Additive Manufacturing Conference, Austin, Tex., E1

conference
2016

Fabrication of biocompatible enclosures for an electronic implant using 3D printing

S Adams, A Kouzani, M Mohammed, C Usma Alvarez, S Tye

(2016), Vol. 6, pp. 17-32, International journal of rapid manufacturing, Olney, Eng., C1

journal

Applications of 3D topography scanning and multi-material additive manufacturing for facial prosthesis

M Mohammed, J Tatineni, B Cadd, G Peart, I Gibson

(2016), pp. 1695-1707, SFF Symp 2016 : Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium, Austin, Texas, E1

conference

Customised design and development of patient specific 3D printed whole mandible implant

M Mohammed, I Gibson, S Malyala, A Fitzpatrick

(2016), pp. 1708-1717, SFF Symp 2016 : Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium, Austin, Texas, E1

conference
2015

Lab-on-a-chip or Chip-in-a-lab: challenges of commercialization lost in translation

M Mohammed, S Haswell, I Gibson

(2015), Vol. 20, pp. 54-59, Procedia technology, Amsterdam, The Netherlands, C1

journal

3D printed biocompatible enclosures for an implantable DBS microdevice

S Adams, A Kouzani, M Mohammed, C Usma Alvarez, S Tye

(2015), Vol. 20, pp. 155-161, Procedia technology, Amsterdam, The Netherlands, C1

journal

Improved manufacturing quality and bonding of laser machined microfluidic systems

M Mohammed, K Quayle, R Alexander, E Doeven, Y Nai, S Haswell, A Kouzani, I Gibson

(2015), Vol. 20, pp. 219-224, Procedia technology, Amsterdam, The Netherlands, C1

journal
2014

Autonomous capillary microfluidic system with embedded optics for improved troponin I cardiac biomarker detection

M Mohammed, M Desmulliez

(2014), Vol. 61, pp. 478-484, Biosensors and bioelectronics, Amsterdam, Netherlands, C1-1

journal

CO2 laser manufacturing of miniaturised lenses for lab-on-a-chip systems

M-I Mohammed, M Desmulliez

(2014), Vol. 5, pp. 457-471, Micromachines, Basel, Switzerland, C1-1

journal

Characterization and Theoretical Analysis of Rapidly Prototyped Capillary Action Autonomous Microfluidic Systems

Mazher Mohammed, Marc Desmulliez

(2014), Vol. 23, pp. 1408-1416, Journal of Microelectromechanical Systems, NJ, United States, C1-1

journal
2013

Rapid laser prototyping of valves for microfluidic autonomous systems

M Mohammed, E Abraham, M Desmulliez

(2013), Vol. 23, pp. 1-9, Journal of micromechanics and microengineering, [Bristol, Eng.], C1-1

journal

Planar lens integrated capillary action microfluidic immunoassay device for the optical detection of troponin I

M Mohammed, M Desmulliez

(2013), Vol. 7, pp. 064112-1-064112-13, Biomicrofluidics, Melville, N.Y., C1-1

journal

The manufacturing of packaged capillary action microfluidic systems by means of CO? laser processing

M Mohammed, M Desmulliez

(2013), Vol. 19, pp. 809-818, Microsystem technologies, Berlin, Germany, C1-1

journal

Lamination based embossing technique for LTCC

S Wilhelm, R Kay, M Mohammed, Y Lacrotte, M Desmulliez

(2013), Vol. 19, pp. 801-807, Microsystem technologies, Berlin, Germany, C1-1

journal
2012

Nonlinear hydrodynamic effects induced by Rayleigh surface acoustic wave in sessile droplets

M Alghane, B Chen, Y Fu, Y Li, M Desmulliez, M Mohammed, A Walton

(2012), Vol. 86, pp. 1-6, Physical review e, College Park, Md., C1-1

journal

CO2 laser machining of fully packaged autonomous microfluidic systems

M Mohammed, M Desmulliez

(2012), pp. 1-8, DTIP 2012 : Proceedings of the 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, Cannes, France, E1-1

conference
2011

Lab-on-a-chip based immunosensor principles and technologies for the detection of cardiac biomarkers: a review

M-I Mohammed, M Desmulliez

(2011), Vol. 11, pp. 569-595, Lab on a chip, Cambridge, Eng., C1-1

journal

A miniaturised integrated biophotonic point-of-care genotyping system

J Girkin, M-I Mohammed, E Ellis

(2011), Vol. 149, pp. 115-123, Faraday discuss, Cambridge, Eng., C1-1

journal
2009

A complete miniaturised genotyping system for the detection of single nucleotide polymorphisms in human DNA samples

M Mohammed, G Sills, M Brodie, E Ellis, J Girkin

(2009), Vol. 139, pp. 83-90, Sensors and actuators, B: chemical, Amsterdam, The Netherlands, C1-1

journal

Funded Projects at Deakin

Industry and Other Funding

3D Printing for Improved Water, Sanitation and Hygiene Services in Aid scenarios

Dr Mazher Mohammed, Dr Clara Mansfield, Federico Marcon

  • 2017: $82,059

Geelong Orthotics Design Investigation

Dr Paul Collins, Dr Kaja Antlej, Dr Clara Mansfield, Dr Mazher Mohammed

  • 2017: $10,000

Supervisions

No completed student supervisions to report