Dr Pavel Cizek

Combining strength and ductility in a precipitation (γ') hardened Fe-rich compositionally complex alloy via recystallisation

M Annasamy, J Joseph, P Cizek, A Vahid, M Barnett, P Hodgson, D Fabijanic

(2024), Vol. 896, pp. 1-11, Materials Science & Engineering: A, Amsterdam, The Netherlands, C1

Dislocation structure evolution during room temperature dwell loading of a Ti-6Al-4 V alloy

P Cizek, S Kada, J Wang, N Armstrong, R Antoniou, S Slater, P Lynch

(2024), Vol. 209, pp. 1-17, Materials Characterization, Amsterdam, The Netherlands, C1

Effect of C on microstructure and strength of AlxCu0.14CrFeMnNi-Towards producing a recycled high entropy alloy

M Navazani, S Kada, A Taylor, P Cizek, D Fabijanic, M Barnett

(2024), Vol. 898, pp. 1-13, Materials Science & Engineering: A, Amsterdam, The Netherlands, C1

Hardening Due to Vanadium Carbides Formed During Short-Time Aging of Hadfield Steels

J Wang, G Bruel, Z Wang, E Gilbert, P Cizek, S Corujeira-Gallo, D Fabijanic, M Barnett

(2023), Vol. 54, pp. 1213-1222, Metallurgical and Materials Transactions A, Berlin, Germany, C1

The effect of quenching on the hinderance of the NbC growth process in a model microalloyed steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2023), pp. 1-15, Philosophical Magazine, London, Eng., C1

Design of precipitation (γ') strengthened Fe-rich medium entropy alloys

J Joseph, M Annasamy, P Cizek, A Vahid, P Hodgson, M Barnett, D Fabijanic

(2023), Vol. 235, pp. 115630-115630, Scripta Materialia, C1

Dislocation structures in a Ti-6Al-4V alloy subjected to cyclic tensile deformation

P Cizek, S Kada, N Armstrong, R Antoniou, S Slater, P Lynch

(2022), Vol. 836, pp. 1-16, Materials Science and Engineering A, Amsterdam, The Netherlands, C1

Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline Al xCoCrFeNi (x = 0, 0.3, 0.6, 1 mol) high-entropy alloys

R Bhattacharya, M Annasamy, P Cizek, M Kamaraj, G Muralikrishna, P Hodgson, D Fabijanic, B Murty

(2022), Vol. 37, pp. 959-975, Journal of Materials Research, C1

X-ray analysis of twin dominated deformation in an aged Mg-7Sn-3Zn-0.04Na alloy

E Motlagh, P Lynch, T Dorin, P Cizek, A Ghaderi, M Barnett, S Kada

(2021), Vol. 9, pp. 1201-1210, Journal of Magnesium and Alloys, C1

Transmission electron microscopy investigation of the dislocation structure in a Ti-6Al-4V alloy subjected to an early stage of cyclic deformation

P Cizek, S Kada, J Wang, N Armstrong, R Antoniou, P Lynch

(2021), Vol. 172, Materials Characterization, C1

Bayesian analysis reveals the impact of load partitioning on microstructural evolution in Ti-6Al-4V during in-situ tensile loading

N Armstrong, P Lynch, P Cizek, S Kada, S Slater, R Antoniou

(2021), Vol. 15, Materialia, C1

End-of-Life Photovoltaic Recycled Silicon: A Sustainable Circular Materials Source for Electronic Industries

Md Rahman, Srikanth Mateti, Irin Sultana, Chunping Hou, Alexey Falin, Pavel Cizek, Alexey Glushenkov, Ying Chen

(2021), Vol. 2, ADVANCED ENERGY AND SUSTAINABILITY RESEARCH, C1

The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel

Q Chao, S Thomas, N Birbilis, P Cizek, P Hodgson, D Fabijanic

(2021), Vol. 821, Materials Science and Engineering: A, C1

Nanoparticle-mediated ultra grain refinement and reinforcement in additively manufactured titanium alloys

Q Chao, S Mateti, M Annasamy, M Imran, J Joseph, Q Cai, L Li, P Cizek, P Hodgson, Y Chen, D Fabijanic, W Xu

(2021), Vol. 46, Additive Manufacturing, C1

The Effect of Strain and Annealing on the Growth of NbC Precipitates During Two-Pass Hot Deformation of a Fe-30Ni-Nb Model Microalloyed Steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2021), Vol. 52, pp. 4357-4367, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Nano germanium incorporated thin graphite nanoplatelets: A novel germanium based lithium-ion battery anode with enhanced electrochemical performance

I Sultana, M Rahman, A Glushenkov, S Mateti, K Tanwar, S Huang, Y Chen

(2021), Vol. 391, Electrochimica Acta, C1

Lithium-metal polysulfide batteries with free-standing MoSxCy thin-film cathodes

K Tanwar, X Tan, M Rahman, S Mateti, P Cizek, P Koley, C Hou, S Smith, Y Chen

(2021), Vol. 511, Journal of Power Sources, C1

On the hot-worked microstructure of a face-centered cubic Al0.3CoCrFeNi high entropy alloy

N Haghdadi, S Primig, M Annasamy, P Cizek, P Hodgson, D Fabijanic

(2020), Vol. 178, pp. 144-149, Scripta Materialia, C1

Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing

M Laleh, A Hughes, W Xu, P Cizek, M Tan

(2020), Vol. 165, Corrosion Science, C1

New insights into the interface characteristics of a duplex stainless steel subjected to accelerated ferrite-to-austenite transformation

N Haghdadi, P Cizek, P Hodgson, Y He, B Sun, J Jonas, G Rohrer, H Beladi

(2020), Vol. 55, pp. 5322-5339, Journal of Materials Science, Berlin, Germany, C1

Dynamic recrystallization in AlXCoCrFeNi duplex high entropy alloys

N Haghdadi, S Primig, M Annasamy, P Cizek, P Hodgson, D Fabijanic

(2020), Vol. 830, Journal of Alloys and Compounds, C1

In situ production of a two-dimensional molybdenum disulfide/graphene hybrid nanosheet anode for lithium-ion batteries

S Mateti, M Rahman, P Cizek, Y Chen

(2020), Vol. 10, pp. 12754-12758, RSC Advances, London, Eng., C1

Probing electrochemical reactivity in an Sb₂S₃-containing potassium-ion battery anode: observation of an increased capacity

V Lakshmi, A Mikhaylov, A Medvedev, C Zhang, T Ramireddy, M Rahman, P Cizek, D Golberg, Y Chen, O Lev, P Prikhodchenko, A Glushenkov

(2020), Vol. 8, pp. 11424-11434, Journal of Materials Chemistry A, Cambridge, Eng., C1

Outstanding Thermal Conductivity of Single Atomic Layer Isotope-Modified Boron Nitride

Q Cai, D Scullion, W Gan, A Falin, P Cizek, S Liu, J Edgar, R Liu, B Cowie, E Santos, L Li

(2020), Vol. 125, Physical Review Letters, United States, C1

Dislocation structures representing individual slip systems within the α phase of a Ti-6Al-4V alloy deformed in tension

P Cizek, S Kada, J Wang, N Armstrong, R Antoniou, P Lynch

(2020), Vol. 797, Materials Science and Engineering A, C1

The effect of phase transformation route on the intergranular corrosion susceptibility of 2205 duplex stainless steel

N Haghdadi, M Laleh, A Kosari, M Moayed, P Cizek, P Hodgson, H Beladi

(2019), Vol. 238, pp. 26-30, Materials letters, Amsterdam, The Netherlands, C1

Microstructure dependence of impact toughness in duplex stainless steels

N Haghdadi, P Cizek, P Hodgson, H Beladi

(2019), Vol. 745, pp. 369-378, Materials Science and Engineering A, C1

Large, Mesoporous Carbon Nanoparticles with Tunable Architectures for Energy Storage

Nisa Salim, Srikanth Mateti, Pavel Cizek, Nishar Hameed, Jyotishkumar Parameswaranpillai, Bronwyn Fox

(2019), Vol. 2, pp. 1727-1736, ACS Applied Nano Materials, Washington, D.C., C1

Abrasive Wear Resistance of Ferrous Microstructures with Similar Bulk Hardness Levels Evaluated by a Scratch-Tester Method

B Narayanaswamy, A Ghaderi, P Hodgson, P Cizek, Q Chao, M Safi, H Beladi

(2019), Vol. 50, pp. 4839-4850, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting

M Laleh, A Hughes, W Xu, N Haghdadi, K Wang, P Cizek, I Gibson, M Tan

(2019), Vol. 161, Corrosion Science, C1

Investigation of stress relaxation mechanisms for ductility improvement in SS316L

A Varma, A Gokhale, J Jain, K Hariharan, P Cizek, M Barnett

(2018), Vol. 98, pp. 165-181, Philosophical magazine, Abingdon, Eng., C1

Effect of heat treatment variables on the formation of precipitate free zones (PFZs) in Mg-8Al-0.5Zn alloy

A Zindal, J Jain, R Prasad, S Singh, R Sarvesha, P Cizek, M Barnett

(2018), Vol. 136, pp. 175-182, Materials characterization, Amsterdam, The Netherlands, C1

Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel

N Haghdadi, P Cizek, P Hodgson, V Tari, G Rohrer, H Beladi

(2018), Vol. 145, pp. 196-209, Acta materialia, Amsterdam, The Netherlands, C1

Five-parameter crystallographic characteristics of the interfaces formed during ferrite to austenite transformation in a duplex stainless steel

N Haghdadi, P Cizek, P Hodgson, V Tari, G Rohrer, H Beladi

(2018), Vol. 98, pp. 1284-1306, Philosophical magazine, Abingdon, Eng., C1

Role of microstructure in corrosion initiation of a highly-deformed AA2024 wire

R Parvizi, A Hughes, A Glenn, P Cizek, M Tan, M Forsyth

(2018), Vol. 144, pp. 184-197, Corrosion science, Amsterdam, The Netherlands, C1

Static Softening in a Ni-30Fe Austenitic Model Alloy After Hot Deformation: Microstructure and Texture Evolution

H Beladi, P Cizek, A Taylor, G Rohrer, P Hodgson

(2017), Vol. 48, pp. 855-867, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Transmission electron microscopy investigation on dislocation bands in pure Mg

J Jain, P Cizek, K Hariharan

(2017), Vol. 130, pp. 133-137, Scripta materialia, Amsterdam, The Netherlands, C1

A novel high-strain-rate ferrite dynamic softening mechanism facilitated by the interphase in the austenite/ferrite microstructure

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 126, pp. 44-57, Acta materialia, Amsterdam, The Netherlands, C1

Probing corrosion initiation at interfacial nanostructures of AA2024-T3

R Parvizi, A Hughes, M Tan, R Marceau, M Forsyth, P Cizek, A Glenn

(2017), Vol. 116, pp. 98-109, Corrosion science, Amsterdam, The Netherlands, C1

On the crystallographic characteristics of nanobainitic steel

H Beladi, V Tari, I Timokhina, P Cizek, G Rohrer, A Rollett, P Hodgson

(2017), Vol. 127, pp. 426-437, Acta materialia, Amsterdam, The Netherlands, C1

The austenite microstructure evolution in a duplex stainless steel subjected to hot deformation

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 97, pp. 1209-1237, Philosophical magazine, Abingdon, Eng., C1

Austenite-ferrite interface crystallography dependence of sigma phase precipitation using the five-parameter characterization approach

N Haghdadi, D Abou-Ras, P Cizek, P Hodgson, A Rollett, H Beladi

(2017), Vol. 196, pp. 264-268, Materials Letters, C1

Strain rate dependence of ferrite dynamic restoration mechanism in a duplex low-density steel

N Haghdadi, A Zarei-Hanzaki, E Farabi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 132, pp. 360-366, Materials and Design, London, Eng, C1

Dynamic Restoration Processes in a 23Cr-6Ni-3Mo Duplex Stainless Steel: Effect of Austenite Morphology and Interface Characteristics

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 48, pp. 4803-4820, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

Correlation of grain boundary precipitate characteristics with fracture and fracture toughness in an Mg-8Al-0.5 Zn alloy

A Zindal, J Jain, R Prasad, S Singh, P Cizek

(2017), Vol. 706, pp. 192-200, Materials science and engineering: A, Amsterdam, The Netherlands, C1

Hot deformation and restoration mechanisms in duplex stainless steels: Effect of strain rate

N Haghdadi, P Cizek, H Beladi, P Hodgson

(2017), Vol. 109, pp. 5-16, Metallurgia Italiana, C1

Enhanced mechanical response of an ultrafine grained Ti-6A1-4V alloy produced through warm symmetric and asymmetric rolling

Q Chao, P Cizek, J Wang, P Hodgson, H Beladi

(2016), Vol. 650, pp. 404-413, Materials Science and Engineering A, C1

The microstructure evolution and softening processes during high-temperature deformation of a 21Cr-10Ni-3Mo duplex stainless steel

P Cizek

(2016), Vol. 106, pp. 129-143, Acta materialia, Oxford, Eng., C1

Microstructure characteristics of the (111) oriented grains in a Fe-30Ni-Nb model austenitic steel deformed in hot uniaxial compression

D Poddar, P Cizek, H Beladi, P Hodgson

(2016), Vol. 118, pp. 382-396, Materials characterization, Amsterdam< The Netherlands, C1

On the Ti-Mo-Fe-C atomic clustering during interphase precipitation in the Ti-Mo steel studied by advanced microscopic techniques

I Timokhina, M Miller, J Wang, H Beladi, P Cizek, P Hodgson

(2016), Vol. 111, pp. 222-229, Materials and design, Amsterdam, The Netherlands, C1

Microstructure and Texture of Electrodeposited Nanocrystalline Nickel in the As-Deposited State and After In-Situ and Ex-Situ Annealing

P Cizek, A Sankaran, E Rauch, M Barnett

(2016), Vol. 47, pp. 6655-6670, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, C1

The effect of simulated thermomechanical processing on the transformation behavior and microstructure of a low-carbon Mo-Nb linepipe steel

P Cizek, B Wynne, C Davies, P Hodgson

(2015), Vol. 46, pp. 407-425, Metallurgical and materials transactions A: physical metallurgy and materials science, New York, NY, C1

High-performance supercapacitor electrode materials from cellulose-derived carbon nanofibers

J Cai, H Niu, Z Li, Y Du, P Cizek, Z Xie, H Xiong, T Lin

(2015), Vol. 7, pp. 14946-14953, ACS Applied Materials & Interfaces, Washington, DC, C1

A self-supported, flexible, binder-free pseudo-supercapacitor electrode material with high capacitance and cycling stability from hollow, capsular polypyrrole fibers

Z Li, Cai, P Cizek, H Niu, Y Du, T Lin

(2015), Vol. 3, pp. 16162-16167, Journal of materials chemistry A, Cambridge, Eng., C1

The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe-30Ni-Nb model austenitic steel

D Poddar, P Cizek, H Beladi, P Hodgson

(2015), Vol. 99, pp. 347-362, Acta materialia, Amsterdam, The Netherlands, C1

The role of back stress caused by precipitates on {101-2} twinning in a Mg-6Zn alloy

J Jain, P Cizek, W Poole, M Barnett

(2015), Vol. 647, pp. 66-73, Materials science and engineering a, Amsterdam, The Netherlands, C1

Orientation dependence of the deformation microstructure in a Fe-30Ni-Nb model austenitic steel subjected to hot uniaxial compression

D Poddar, P Cizek, H Beladi, P Hodgson

(2015), Vol. 46, pp. 5933-5951, Metallurgical and materials transactions A, New York, N.Y., C1

Evolution of strain-induced precipitates in a model austenitic Fe-30Ni-Nb steel and their effect on the flow behaviour

D Poddar, P Cizek, H Beladi, P Hodgson

(2014), Vol. 80, pp. 1-15, Acta Materialia, Amsterdam, The Netherlands, C1

Facile preparation and thermoelectric properties of Bi₂Te₃ based alloy nanosheet/PEDOT:PSS composite films

Y Du, K Cai, S Chen, P Cizek, T Lin

(2014), Vol. 6, pp. 5735-5743, ACS applied materials and interfaces, Washington, D.C., C1

Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening

D Yang, J Wang, D Fabijanic, P Cizek, B Li, J Lu, P Hodgson

(2013), Vol. 560, pp. 339-342, Materials science and engineering A, Amsterdam, The Netherlands, C1

Work hardening in ultrafine-grained titanium : multilayering and grading

D Yang, P Cizek, D Fabijanic, J Wang, P Hodgson

(2013), Vol. 61, pp. 2840-2852, Acta materialia, Amsterdam, The Netherlands, C1

Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg-6 Zn alloy

J Jain, P Cizek, W Poole, M Barnett

(2013), Vol. 61, pp. 4091-4102, Acta materialia, Amsterdam, The Netherlands, C1

Microstructural characteristics of a nanoeutectic Ag-Cu alloy processed by surface mechanical attrition treatment

M Wen, P Cizek, C Wen, P Hodgson, Y Li

(2013), Vol. 68, pp. 499-502, Scripta materialia, Amsterdam, The Netherlands, C1

Effect of substructure characteristics on the dislocation annihilation process during post-deformation annealing

H Beladi, P Cizek, A Taylor, P Hodgson

(2013), Vol. 753, pp. 76-79, Materials science forum, Stafa-Zurich, Switzerland, C1

Microstructure evolution and softening processes in hot deformed austenitic and duplex stainless steels

P Cizek

(2013), Vol. 753, pp. 66-71, Materials science forum, Stafa-Zurich, Switzerland, C1

Orientation dependence of the substructure characteristics in a Ni- 30%Fe austenitic alloy deformed in hot torsion

P Cizek, H Beladi, A Taylor, P Hodgson

(2013), Vol. 753, pp. 54-57, Materials science forum, Stafa-Zurich, Switzerland, C1

On the deformation mechanism of ultrafine-grained titanium with multilayered hierarchical structure

D Yang, P Cizek, D Fabijanic, P Hodgson

(2013), Vol. 582, pp. 162-169, Materials science and engineering A, Amsterdam, The Netherlands, C1

Microstructure evolution and softening processes occurring during annealing of hot deformed Ni-30Fe austenite

P Hodgson, P Cizek, H Beladi, A Taylor

(2012), Vol. 706-709, pp. 2134-2139, Materials science forum, Stafa-Zurich, Switzerland, C1

Texture evolution and softening processes in an austenitic Ni-30Fe alloy subjected to hot deformation and subsequent annealing

P Hodgson, P Cizek, A Taylor, H Beladi

(2012), Vol. 702-703, pp. 435-438, Materials science forum, Stafa-Zurich, Switzerland, C1

Substructure and texture characteristics of the deformed matrix and dynamically recrystallized grains in a Ni-30%Fe austenitic alloy

P Cizek, H Beladi, P Hodgson

(2012), Vol. 715-716, pp. 180-185, Materials science forum, Stafa-Zurich, Switzerland, C1

New insights into the dynamic and metadynamic recrystallization of austenite

P Hodgson, P Cizek, H Beladi

(2012), Vol. 715-716, pp. 259-266, Materials science forum, Stafa-Zurich, Switzerland, C1

{1012} Twinning in magnesium-based lamellar microstructures

N Stanford, A Taylor, P Cizek, F Siska, M Ramajayam, M Barnett

(2012), Vol. 67, pp. 704-707, Scripta Materialia, Amsterdam, The Netherlands, C1

Orientation dependence of the substructure characteristics in a Ni-30Fe austenitic model alloy deformed in hot plane strain compression

A Taylor, P Cizek, P Hodgson

(2012), Vol. 60, pp. 1548-1569, Acta materialia, Oxford, England, C1

Observation of (sub)grain clusters in the as-deposited and in situ annealed nanocrystalline nickel using automated crystal orientation mapping

P Cizek, A Sankaran, E Rauchc, M Barnett

(2012), Vol. 67, pp. 685-688, Scripta materialia, Oxford, England, C1

Strain rate effect on the cyclic deformation response of UFG Al alloys

S Malekjani, P Hodgson, P Cizek, T Hilditch

(2012), Vol. 548, pp. 69-74, Materials science and engineering A, Lausanne, Switzerland, C1

A critical test of twin-induced softening in a magnesium alloy extruded to a strain of 0.7 at room temperature

Z Zhang, P Cizek, M Barnett

(2012), Vol. 67, pp. 1015-1018, Scripta materialia, Amsterdam, The Netherlands, C1

Development of adiabatic shear band in cold-rolled titanium

D Yang, Y An, P Cizek, P Hodgson

(2011), Vol. 528, pp. 3990-3997, Materials science and engineering : A, Amsterdam, The Netherlands, C1

Microscale and mesoscale crystallographic textures of nanocrystalline ni-based electrodeposits

P Cizek, M Barnett, M Nave, E Rauch, R Balasubramaniam

(2011), Vol. 42, pp. 2048-2060, Metallurgical and materials transactions A – physical metallurgy and materials science, New York, N.Y., C1

Cyclic deformation response of UFG 2024 Al alloy

S Malekjani, P Hodgson, P Cizek, I Sabirov, T Hilditch

(2011), Vol. 33, pp. 700-709, International journal of fatigue, Oxford, U. K., C1

Cyclic deformation response of ultrafine pure Al

S Malekjani, P Hodgson, P Cizek, T Hilditch

(2011), Vol. 59, pp. 5358-5367, Acta materialia, Oxford, England, C1

New insight into the mechanism of metadynamic softening in austenite

H Beladi, P Cizek, P Hodgson

(2011), Vol. 59, pp. 1482-1492, Acta materialia, Oxford, U. K., C1

Semiparametrically weighted robust estimation of regression models

P Cizek

(2011), Vol. 55, pp. 774-788, Computational statistics and data analysis, Amsterdam, Netherlands, C1-1

The use of Fe-30% Ni and Fe-30% Ni-Nb alloys as model systems for studying the microstructural evolution during the hot deformation of austenite

E Palmeire, P Cizek, F Bai, R Poths, J Turner, B Wynne, W Rainforth

(2011), Vol. 26, pp. 127-131, Materials and manufacturing processes, Philadelphia, Pa., C1-1

Comparison of 304 stainless steel and Ni-30 wt.% Fe as potential model alloys to study the behaviour of austenite during thermomechanical processing

A Taylor, P Cizek, P Hodgson

(2011), Vol. 59, pp. 5832-5844, Acta materialia, Oxford, U. K., C1

Texture and substructure development during dynamic recrystallization in Ni-30Fe austenite

H Beladi, P Cizek, P Hodgson

(2010), Vol. 638-642, pp. 2835-2840, Materials science forum, Stafa-Zurich, Switzerland, C1

The mechanism of metadynamic softening in austenite after complete dynamic recrystallization

H Beladi, P Cizek, P Hodgson

(2010), Vol. 62, pp. 191-194, Scripta materialia, Kidlington, England, C1

Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium

D Yang, P Cizek, P Hodgson, C Wen

(2010), Vol. 58, pp. 4536-4548, Acta materialia, Oxford, England, C1

Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding

D Yang, P Cizek, P Hodgson, C Wen

(2010), Vol. 62, pp. 321-324, Scripta materialia, Oxford, England, C1

Synthesis of silica-coated ZnO nanocomposite : the resonance structure of polyvinyl pyrrolidone (PVP) as a coupling agent

J Wang, T Tsuzuki, B Tang, P Cizek, L Sun, X Wang

(2010), Vol. 288, pp. 1705-1711, Colloid and polymer science, Heidelberg, Germany, C1

On the characteristics of substructure development through dynamic recrystallization

H Beladi, P Cizek, P Hodgson

(2010), Vol. 58, pp. 3531-3541, Acta materialia, Amsterdam, The Netherlands, C1

Texture and substructure development during post-dynamic softening in Ni-30%Fe austenite

H Beladi, P Cizek, P Hodgson

(2010), Vol. 654-656, pp. 1279-1282, Materials science forum, Stafa-Zurich, Switzerland, C1

Mechanically alloyed and spark plasma sintered aluminium/precious metal oxide composite materials

M Kubota, P Cizek

(2010), Vol. 638-642, pp. 1824-1829, Materials science forum, Stafa-Zurich, Switzerland, C1

Dislocation boundaries and disclinations formed within the cube-oriented grains during tensile deformation of aluminium

P Cizek

(2010), Vol. 58, pp. 5820-5833, Acta materialia, Oxford, England, C1

Cobblestone mesotexture in a nanocrystalline Ni-20Fe electrodeposit

M Barnett, P Cizek, M Nave, A Sullivan, R Balasubramaniam

(2009), Vol. 60, pp. 603-606, Scripta materialia, Oxford, England, C1

Dynamic recrystallization of austenite in Ni-30 Pct Fe model alloy : microstructure and texture evolution

H Beladi, P Cizek, P Hodgson

(2009), Vol. 40, pp. 1175-1189, Metallurgical and materials transactions A : physical metallurgy and materials science, New York, N.Y., C1

Texture and substructure characteristics of dynamic recrystallization in a Ni-30%Fe austenitic model alloy

H Beladi, P Cizek, P Hodgson

(2009), Vol. 61, pp. 528-531, Scripta materialia, Kidlington, United Kingdom, C1

Deformation modes and anisotropy in magnesium alloy AZ31

B Hutchinson, M Barnett, A Ghaderi, P Cizek, I Sabirov

(2009), Vol. 100, pp. 556-563, International journal of materials research, Munich, Germany, C1

Deformation mechanisms in mg alloys and the challenge of extending room-temperature Plasticity

M Barnett, N Stanford, P Cizek, A Beer, Z Xuebin, Z Keshavarz

(2009), Vol. 61, pp. 19-24, JOM: The journal of the minerals, metals and materials society (TMS), New York, N.Y., C1

Properties of mechanically milled and spark plasma sintered Al-15 at.% MgB2 composite materials

M Kubota, P Cizek, W Rainforth

(2008), Vol. 68, pp. 888-895, Composites science and technology, Oxford, England, C1

Characteristics of the contraction twins formed close to the fracture surface in Mg-3A1-1Zn alloy deformed in tension

P Cizek, M Barnett

(2008), Vol. 59, pp. 959-962, Scripta Materialia, Oxford, England, C1

Synthesis of Al3BC from mechanically milled and spark plasma sintered Al-MgB2 composite materials

M Kubota, P Cizek

(2008), Vol. 457, pp. 209-215, Journal of alloys and compounds, Amsterdam, Netherlands, C1-1

Modeling the flow behavior, recrystallization, and crystallographic texture in hot-deformed Fe-30 Wt Pct Ni Austenite

M Abbod, C Sellars, P Cizek, D Linkens, M Mahfouf

(2007), Vol. 38, pp. 2400-2409, Metallurgical and materials transactions A : physical metallurgy and materials science, Berlin, Germany, C1

EBSD investigation of the microstructure and texture characteristics of hot deformed duplex stainless steel

P Cizek, B Wynne, W Rainforth

(2006), Vol. 222, pp. 85-96, Journal of microscopy, Oxford, England, C1-1

An analysis of microband orientation in hot deformed aluminium alloy AA5052 using forward and reverse torsion

M Lopez-Pedrosa, B Wynne, W Rainforth, P Cizek

(2006), Vol. 519, pp. 877-882, Materials science forum, Stafa-Zurich, Switzerland, C1-1

EBSD study of the orientation dependence of substructure characteristics in a model Fe-30wt%Ni alloy subjected to hot deformation

P Cizek, F Bai, E Palmiere, W Rainforth

(2005), Vol. 217, pp. 138-151, Journal of microscopy, Oxford, England, C1-1

Characteristics of the deformed and recrystallised grains obtained after hot plane strain compression of a model Fe-30wt%Ni alloy

F Bai, P Cizek, E Palmiere, W Rainforth

(2004), Vol. 467, pp. 21-26, Materials science forum, Stafa-Zurich, Switzerland, C1-1

Softening mechanisms in two duplex stainless steels deformed in hot torsion

P Cizek

(2004), Vol. 467 - 470, pp. 1157-1162, Materials science forum, Stafa-Zurich, Switzerland, C1-1

Fine structure of shear bands formed during hot deformation of two austenitic steels

P Cizek, F Bai, W Rainforth, J Beynon

(2004), Vol. 45, pp. 2157-2164, Materials transactions, Sendai , Japan, C1-1

EBSD and TEM investigation of the hot deformation substructure characteristics of a type 316L austenitic stainless steel

P Cizek, J Whiteman, W Rainforth, J Beynon

(2004), Vol. 213, pp. 285-295, Journal of microscopy, Oxford, England, C1-1

Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels

P Cizek, B Wynne, C Davies, B Muddle, P Hodgson

(2002), Vol. 33, pp. 1331-1349, Metallurgical and materials transactions A - physical metallurgy and materials science, Warrendale, Pa., C1

Characteristics of shear bands formed in an austenitic stainless steel during hot deformation

P Cizek

(2002), Vol. 324, pp. 214-218, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

Heterogeneous nucleation mechanism in Al-Fe-Si amorphous alloys

P Schumacher, P Cizek

(2001), Vol. 304-306, pp. 215-219, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

Heterogeneous nucleation in an Al-Ni-Si alloy studied using a metallic glass technique

B McKay, P Cizek, P Schumacher, K O'reilly

(2001), Vol. 304, pp. 240-244, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

Characteristics of the equiaxed cell block structure formed within cube-textured grains during tensile deformation of aluminium

P Cizek

(2001), Vol. 45, pp. 815-822, Scripta materialia, Amsterdam, The Netherlands, C1-1

Deformation banding in (001)[110] textured aluminium sheet deformed in tension

P Cizek, B Wynne, H Lu, B Parker

(1996), Vol. 219, pp. 44-55, Materials science and engineering A, Amsterdam, The Netherlands, C1-1

The behaviour of incidental dislocation boundaries and geometrically necessary boundaries during warm tensile deformation of aluminium

P Cizek, B Wynne, B Parker

(1996), Vol. 35, pp. 1129-1134, Scripta materialia, Kidlington, Eng., C1-1

A crystallographic study of dislocation cell arrangement in aluminium deformed at an elevated temperature

P Cizek, B Parker, D McCulloch

(1995), Vol. 194, pp. 201-210, Materials science and engineering: A, Amsterdam, The Netherlands, C1-1

The influence of large boride particles on microstructural evolution in AISI 304 steel

P Cizek, B Parker, M Bijok, P Zuna

(1994), Vol. 34, pp. 679-688, ISIJ International, Tokyo, Japan, C1-1