Nokia Deakin Wi-Fi configuration

These instructions will set up a Nokia E51 and similar models with access to the Deakin Wi-Fi.

1. Click Tools, then click Settings, then click Connection, then click Access Points
2. Click menu Options > New access point
3. Click Connection Name and enter:DeakinSecure
4. Click Data bearer
   1. Select Wireless LAN
5. Click WLAN Netw. name
   1. Select Search for netw
   2. Select DeakinSecure
6. Verify that network status: Public
7. Verify that WLAN netw. mode: Infrastructure
8. Verify that WLAN security mode: WPA/WPA2
9. Click WLAN security settings
   1. Verify that WPA/WPA2: EAP
   2. Verify that WAP2 only mode: off
10. Click EAP plug-in settings
    1. Click menu Options > Enable
    2. Click EAP-PEAP
    3. Click all others unticked
    4. Select EAP-PEAP
    5. Click menu Options > Configure
    6. Click General Tab
       1. Verify that Personal Certificate: (not defined)
       2. Click Authority certificate and select Thawte Premium Server...
       3. Click User name in use: User-configured
       4. Click User name and enter: < deakin username >
       5. Click Real in use: User-configured
       6. Click Realm and enter: deakin.edu.au
       7. Allow PEAPv0: Yes
       8. Click Allow PEAPv1: No
       9. Click Allow PEAPv2: No
    7. Click EAP tab
       1. Click EAP-MSCHAPv2 only
       2. Click all others unticked
       3. Select EAP-MSCHAPv2
       4. Click menu Options > Configure
       5. Click User name and enter: < deakin username > @deakin.edu.au
       6. Verify that prompt password: No
       7. Click Password: < deakin password >
          1. Note: You will need to update this password whenever you change your Deakin password
       8. Click menu Back
    8. Click Cipher tab
       1. Click RSA,AES,SHA
       2. Click DHE-RSA,AES,SHA
       3. Click DHE-DSS,AES,SHA
    9. Click menu Options > Exit