Bachelor of Electrical and Electronics Engineering (Honours)

Course summary for local students


2017 course information

Award granted Bachelor of Electrical and Electronics Engineering (Honours)

Offered at Burwood (Melbourne) (first year of course only)*, Waurn Ponds (Geelong)

Cloud CampusYes
Length4 years full-time or part-time equivalent
Next available intake

March (Trimester 1), July (Trimester 2)^

CSP annual fee (indicative) - commencing 2017$9,050 for 1 yr full-time - Commonwealth Supported Place (HECS)
Full fee paying annual fee - commencing 2017Not applicable
Faculty contacts

Faculty of Science, Engineering and Built Environment
School of Engineering
Tel 03 9244 6699

Clearly-in ATAR
Burwood (Melbourne): N/A
Waurn Ponds (Geelong) - off campus: N/A
Waurn Ponds (Geelong): N/A
CRICOS course code079997G
VTAC Codes1400314811 - Waurn Ponds (Geelong), Commonwealth Supported Place (HECS)
1400514811 - Burwood (Melbourne), Commonwealth Supported Place (HECS)
1400614811 - Cloud (online), Commonwealth Supported Place (HECS)
Deakin course code S461

Trimester 2 intake only available at Waurn Ponds (Geelong) and Cloud (Online).

* Only the first year of this Engineering program is available at the Melbourne Burwood Campus.  Students enrolled at the Melbourne Burwood Campus will be required to transfer to the Geelong Waurn Ponds Campus or Cloud (online) mode for the second year of their program.

International students holding student visas – this course is registered for delivery to student visa holders at Geelong Waurn Ponds campus.

Course sub-headings

Course overview

Deakin’s Bachelor of Electrical and Electronics Engineering (Honours) prepares you to be an industry-ready professional engineer responsible for the design, construction, protection and project management of power generation, distribution, transmission, scheduling and usage, automation and control.

Our student-centred learning environment means you’ll use industry standard tools in world-class facilities and benefit from strong links with leading organisations in the electrical and renewable energy industry throughout your course. You’ll also have the chance to undertake real-life professional engineering practice and acquire transferrable skills in entrepreneurship, innovation, leadership, project management, technical report writing and more.

The course encourages the responsible use of electrical power in a changing climate, and covers a broad range of electrical and electronic engineering disciplines including renewable electrical power generation; smart distribution; urban, industrial, rural and regional power usage; and the role of energy production and efficiency in climate change. You’ll also develop an understanding of the ethical considerations and contemporary technical issues in the practice of engineering.

Through project-oriented design-based learning (PODBL) you gain experience with real-life industry- related projects and acquire insights into how to best address complex problems and produce innovative solutions beneficial to an organisation and the wider community.

Deakin’s Bachelor of Electrical and Electronics Engineering (Honours) is accredited by Engineers Australia, giving the degree international recognition and allowing graduates to practice as professional engineers in many countries around the world.

With an international skills shortage in the engineering industry, Deakin graduates are in demand. As a graduate you can expect to gain employment in areas such as power generation distribution and transmission, electronic design, factory control, local government, public works and consulting.

Units in the course may include assessment hurdle requirements.

Professional recognition

Deakin’s Bachelor of Electrical and Electronics Engineering (Honours) is accredited by Engineers Australia, which gives the degree international recognition, allowing graduates to practise as professional engineers in many countries around the world.

Fees and charges

The tuition fees you pay will depend on the units you choose to study as each unit has its own costs. The ‘Estimated tuition fee’ is provided as a guide only based on a typical enrolment of students undertaking the first year of this course. The cost will vary depending on the units you choose, your study load, the time it takes to complete your course and any approved Credit for Prior Learning you have.

Each unit you enrol in has a credit point value. The ‘Estimated tuition fee’ is calculated by adding together 8 credit points of a typical combination of units for that course. Eight credit points is used as it represents a typical full-time enrolment load for a year.

You can find the credit point value of each unit under the Unit Description by searching for the unit in the Handbook.

Learn more about fees and available payment options.

Career opportunities

Graduates can expect to gain employment in power generation distribution and transmission organisations, electronic design, factory control, local government, public works and consulting.

Course Learning Outcomes

Deakin Graduate Learning Outcomes (DGLOs)

Course Learning Outcomes (CLOs)

1. Discipline-specific knowledge and capabilities: appropriate to the level of study related to a discipline or profession.

  • Integrate well-developed knowledge of physical sciences and engineering fundamentals, which underpins the engineering discipline to analyse complex engineering problems and to evaluate possible solutions.
  • Apply professional engineering knowledge, and knowledge of contextual factors in order to design, develop and maintain sustainable engineering infrastructure, systems or products.
  • Plan and execute research projects to show capacity for advanced knowledge and skills in an engineering discipline and thereby demonstrate the ability to continue professional development and / or scholarship.

2. Communication: using oral, written and interpersonal communication to inform, motivate and effect change.

  • Apply effective communication skills in a professional context to interpret, evaluate and present technical engineering information using oral, written, visual modes.
  • Demonstrate proficiency in comprehending viewpoints of others and present arguments and justifications for representing engineering position to technical and non-technical audience.

3. Digital literacy: using technologies to find, use and disseminate information.


  • Identify, select and use digital technologies and tools relevant to the engineering discipline to generate, manage and share information.
  • Demonstrate the ability to independently and systematically locate information, evaluate its reliability, and use the information for engineering design, problem solving and research purposes.

4. Critical thinking: evaluating information using critical and analytical thinking and judgment.

  • Demonstrate autonomy and judgement through balanced application of logic, intellectual and research criteria to review, analyse, and synthesise information for engineering problem solving.

5. Problem solving: creating solutions to authentic (real world and ill-defined) problems.

  • Apply engineering knowledge, skills and techniques to identify and define complex problems in a variety of contexts.
  • Evaluate and use established engineering methods to identify potential solutions to independently and collaboratively resolve complex engineering problems and realise solutions.
  • Demonstrate innovative and creative approaches and/or solutions in planning, designing or executing engineering projects.


6. Self-management: working and learning independently, and taking responsibility for personal actions.

  • Evaluate own knowledge and skills using frameworks of reflection and take responsibility for learning and performance.
  • Work responsibly and safely in engineering environments to demonstrate professionalism.

7. Teamwork: working and learning with others from different disciplines and backgrounds.

  • Undertake various team roles, work effectively within a team, and utilise effective teamwork skills in order to achieve learning goals.
  • Apply interpersonal skills to interact and collaborate to enhance outcomes through shared individual and collective knowledge and creative capacity to optimise complex problem resolution.

8. Global citizenship: engaging ethically and productively in the professional context and with diverse communities and cultures in a global context.

  • Formulate sustainable engineering practices by integrating aspects of design, development or research through concern for economic, environmental, social and cultural perspectives and values.
  • Engage with global traditions and current trends in engineering practice in order to appreciate diversity, seek equity in outcomes and adopt ethical and professional standards.


Approved by Faculty Board 14 July 2016

Course rules

To complete the Bachelor of Electrical and Electronics Engineering (Honours), students must attain 32 credit points. Units (think of units as ‘subjects’) are equal to 1 or 2 credit points, sometimes abbreviated as cps. Most students choose to study units amounting to 4 credit points (or cps) per trimester, and usually undertake two trimesters each year.

The 32 credit points include 30 core units (these are compulsory) and 2 Engineering elective units (you can choose which ones to study).

Course structure


Level 1 - Trimester 1

SEJ101Design Fundamentals (2 credit points)

SEB101Engineering Fundamentals

SIT199Applied Algebra and Statistics

SEJ010Introduction to Safety and Project Oriented Learning (0 credit points)

Level 1 - Trimester 2

SEJ102Electrical Systems Engineering Project (2 credit points)

SIT194Introduction to Mathematical Modelling

SIT172Programming for Engineers

Level 2 - Trimester 1

SEE210Power Engineering Design (2 credit points)

SEP291Engineering Modelling

SEE206Measurement and Instrumentation

Level 2 - Trimester 2

STP010Introduction to Work Placements (0 credit points)

SEE213Distributed Generation System Design (2 credit points)^

SEE216Analogue and Digital Systems

SER202Programming for Embedded Systems

Level 3 - Trimester 1

SEE332Transmission and Distribution System Design (2 credit points)

SEE307Systems and Signals

SEE312Data Communication

Level 3 - Trimester 2

SEE333Power System Protection Design and Safety (2 credit points)

SEE344Control Systems

SEE308Electrical Machines and Drives

SEP490Engineering Work Experience * (0 credit points)

* SEP490 is available in trimester 1, 2 and 3

Level 4 - Trimester 1

SEJ441Engineering Project A (2 credit points)~


Engineering elective

Level 4 - Trimester 2

SEJ446Engineering Project B (2 credit points)~

SEE406Power System Analysis ^

Engineering elective

^ offered in trimester 2 from 2018 onwards

~ Note: Students are expected to undertake SEJ441 and SEJ446 in consecutive trimesters.  Students will be required to seek approval from the unit chair if they are unable to complete SEJ441 and SEJ446 consecutively.  

^ Must have successfully completed STP010 Introduction to Work Placements (0 credit point unit)

# available from 2018



Engineering elective units:

SEE409Energy Efficiency and Demand Management

SEE410High Voltage Engineering #

 # available from 2018

Articulation and credit transfer

Flexible entry into the course allows students to upgrade their qualifications and to obtain credit for previous studies/experience. Applicants with appropriate TAFE qualifications or other approved post-secondary studies may apply for credit for prior learning. Credit may be considered for skills obtained in the workforce or by informal means.

Attendance requirements

In order to satisfy course accreditation requirements, as specified and administered by Engineers Australia, all Cloud Campus enrolled students are required to participate in Campus learning activities equivalent to a minimum duration of one full academic week for every trimester of effective full time study in order to ensure that graduates possess and have demonstrated the minimum necessary knowledge and skill base, engineering application abilities, and professional skills, values and attitudes at successful completion of the course to be sufficiently prepared to enter professional engineering practice.

Cloud Campus enrolled students are required to attend campus mode conducted activities during the corresponding Intensive Week in a trimester. Attendance at campus mode activities is linked to assessment requirements within the Engineering programmes, failure to attend will result in not meeting the hurdle requirement of the respective assessment. Thus, a fail grade shall be awarded for the respective affected unit(s) for that particular trimester.

Note: Non student visa holders can choose to study at Geelong Waurn Ponds Campus or Cloud Campus. Those residing outside of Australia can study via Cloud Campus. Students enrolled in Cloud Campus mode will be required to attend campus based activities at scheduled sessions during the trimester intensive week. Cloud Campus students will be required to obtain a visitor visa to undertake these campus based activities. It is not possible to apply for a student visa to attend the intensive week programs.

Equipment requirements

Students must have access to a suitable computer and a network connection.  Information about the hardware and software requirements may be obtained from the School of Engineering, telephone 03 9244 6699.

Work experience

Before students will be deemed eligible to graduate they must obtain an aggregate of at least 12 weeks of suitable practical experience during their program. Work experience would normally be gained during the vacation periods. Further details are contained in the unit description for SEP490 Engineering Work Experience.

Entry requirements - general

Deakin University offers admission to undergraduate courses through a number of admission categories.

In all categories of admission, selection is based primarily on academic merit as indicated by an applicant's previous academic record.

For more information on the Admission Criteria and Selection Policy visit The Guide.

Entry requirements - specific

Applicants should have successfully completed VCE or equivalent. Refer to the VTAC Guide for the latest pre-requisite information

Those aged 21 or over on 1 January and who do not hold VCE or equivalent should apply under Alternative Admission. This category is open to those who do not satisfy normal entrance requirements, but can demonstrate relevant work or life experience.

Credit for prior learning - specific

The University aims to provide students with as much credit as possible for approved prior study or informal learning which exceeds the normal entrance requirements for the course and is within the constraints of the course regulations. Students are required to complete a minimum of 50% of the course at Deakin University.

You can also refer to the Credit for Prior Learning System which outlines the credit that may be granted towards a Deakin University degree.

How to apply

Trimester 3 – start studying in November 2016

To see if this course is taking applications, check our Trimester 3 webpage. Applications for Trimester 3 are made directly to Deakin through our Applicant Portal.

Trimester 1 – start studying in March 2017

Apply through VTAC for Trimester 1.

Exceptions to submitting a VTAC application

If you are:

  • not studying Year 12 in 2016 and only intend to apply to one institution for one course (which is Deakin), or
  • applying for a Deakin course, which is not listed on the VTAC website.

a direct application can be submitted to Deakin through our Applicant Portal.


You can expect to participate in a range of teaching activities each week. This could include classes, seminars, practicals and online interaction. You can refer to the individual unit details in the course structure for more information. You will also need to study and complete assessment tasks in your own time.

Work experience

You’ll gain industry experience by completing at least 60 days of practical work experience in an engineering workplace, developing and enhancing your understanding of the engineering profession, possible career outcomes, and the opportunity to establish valuable professional networks.