Prof Jeong Yoon

New geometry-inspired numerical convex analysis method for yield functions under isotropic and anisotropic hardenings

Y Lou, C Zhang, P Wu, J Yoon

(2024), Vol. 286-287, pp. 1-28, International Journal of Solids and Structures, Amsterdam, The Netherlands, C1

Finite difference based stress integration algorithm for crystal plasticity finite element method

D Noh, J Yoon

(2024), Vol. 17, pp. 1-20, International Journal of Material Forming, Berlin, Germany, C1

Prediction of controlled fragmentation for cylindrical casing with circumferential grooves

D Noh, T Jang, S Seo, J Lee, S Seo, H Huh, J Yoon

(2024), Vol. 186, pp. 1-13, International Journal of Impact Engineering, Amsterdam, The Netherlands, C1

Mapping of gun-firing loading to high-impact testing velocity with shock response spectrum method

K Yu, Sook Lee, J Won Yoon, Y Jung, H Huh, J Yoon

(2024), Vol. 211, pp. 1-22, Mechanical Systems and Signal Processing, Amsterdam, The Netherlands, C1

The potential of rubber materials as an inhibitor to suppress jet formation of the shaped charge warhead

J Joo, J Yoon

(2024), Vol. 38, pp. 1329-1340, Journal of Mechanical Science and Technology, Berlin, Germany, C1-1

Bauschinger effect calibration by the different types of loading/reverse loading tests for springback prediction in sheet metal forming

Kwanghyun Yu, Hyunsung Choi, Jiwoong Ha, Jeong Yoon

(2023), Vol. 16, International Journal of Material Forming, C1

Analytically described polynomial yield criterion by considering both plane strain and pure shear states

Q Hu, J Yoon, J Chen

(2023), Vol. 162, pp. 1-28, International Journal of Plasticity, Amsterdam, The Netherlands, C1

Thermal softening behavior up to fracture initiation during high-rate deformation

C Lee, J Yoon, S Woo, L Park

(2023), Vol. 251, pp. 1-19, International Journal of Mechanical Sciences, Amsterdam, The Netherlands, C1

Earing prediction with a stress invariant-based anisotropic yield function under non-associated flow rule

S Zhang, Y Lou, J Yoon

(2023), Vol. 16, pp. 1-11, International Journal of Material Forming, Berlin, Germany, C1-1

Machine learning-driven stress integration method for anisotropic plasticity in sheet metal forming

P Fazily, J Yoon

(2023), Vol. 166, pp. 1-23, International Journal of Plasticity, Amsterdam, The Netherlands, C1

A new simplified distortional hardening model for nonlinear strain paths

Hyunsung Choi, Jeong Yoon

(2023), Vol. 165, pp. 1-35, International Journal of Plasticity, Amsterdam, The Netherlands, C1

Determination of Johnson-Cook Constitutive Model Coefficients Considering Initial Gap Between Contact Faces in SHPB Test

Taek Jang, Jeong Yoon, Jong-Bong Kim

(2023), Vol. 24, pp. 7242-7257, Journal of Materials Research and Technology, Amsterdam, The Netherlands, C1

Tungsten alloy impact fracture for frangible armor piercing

D Noh, P Fazily, K Yu, S Lee, D Ko, M Sung, H Huh, J Yoon

(2023), Vol. 180, pp. 1-14, International Journal of Impact Engineering, Amsterdam, The Netherlands, C1

Lode-dependent anisotropic-asymmetric yield function for isotropic and anisotropic hardening of pressure-insensitive materials. Part I: Quadratic function under non-associated flow rule

Y Lou, J Yoon

(2023), Vol. 166, pp. 1-30, International Journal of Plasticity, Amsterdam, The Netherlands, C1

Spherical Cavity Expansion Method Dependent on Strain, Strain rate, and Temperature

Inhan Ga, Donghwan Noh, Jeong Yoon

(2023), Vol. 181, pp. 1-16, International Journal of Impact Engineering, Amsterdam, The Netherlands, C1

Special Issue for KSTP30 Years Anniversary: Recent Steel Research in Mechanics of Plastic Deformation and Materials Processing

Jeong Yoon, Heung Han

(2023), Vol. 94, Steel Research International, London, Eng., C1

Particle-matrix debonding with Strength-Differential effects

C Sagong, B Legarth, J Yoon

(2023), pp. 1-16, European Journal of Mechanics, A/Solids, Amsterdam, The Netherlands, C1

Formability classifier for a TV back panel part with machine learning

P Fazily, D Cho, H Choi, J Cho, J Lee, J Yoon

(2023), Vol. 16, pp. 1-17, International Journal of Material Forming, Berlin, Germany, C1

Superconducting MgB2 Wire Drawing Considering Anisotropic Hardening Behavior and Hydrostatic Effect

Y Oh, H Lee, K Chung, D Hwang, S Kang, J Yoon

(2022), Vol. 28, pp. 1697-1710, Metals and Materials International, C1-1

Anisotropic distortional hardening based on deviatoric stress invariants under non-associated flow rule

Q Hu, J Yoon

(2022), Vol. 151, pp. 1-44, International Journal of Plasticity, Amsterdam, The Netherlands, C1

A new asymmetric yield criterion based on Yld 2000-2d under both associated and non-associated flow rules: Modeling and validation

Q Hu, J Chen, J Yoon

(2022), Vol. 167, pp. 1-17, Mechanics of Materials, Amsterdam, The Netherlands, C1

Artificial intelligence for springback compensation with electric vehicle motor component

H Choi, P Fazily, J Park, Y Kim, J Cho, J Kim, J Yoon

(2022), Vol. 15, pp. 1-20, International Journal of Material Forming, Berlin,Germany, C1

Failure mechanism for metal cylinder under explosive loading

D Noh, S Seo, J Lee, M Jang, J Yoon

(2022), Vol. 36, pp. 4463-4474, Journal of Mechanical Science and Technology, Berlin, Germany, C1

A stress-based shear fracture criterion considering the effect of stress triaxiality and Lode parameter

Y Lou, P Wu, C Zhang, J Wang, X Li, R Chai, J Yoon

(2022), Vol. 256, pp. 1-13, International Journal of Solids and Structures, Amsterdam, The Netherlands, C1

A general yield function with differential and anisotropic hardening for strength modelling under various stress states with non-associated flow rule

Y Lou, C Zhang, S Zhang, J Yoon

(2022), Vol. 158, International Journal of Plasticity, C1

Effect of Strain Localization on the Mechanical Properties from Nonuniform Grain Size Distribution of Ultralow Carbon Steel

C Kang, J Yoon

(2022), Vol. 94, Steel Research International, C1

A general FRC (fiber reinforced composite) constitutive model considering transverse isotropy and accumulated damage

J Park, J Yoon

(2022), Vol. 36, pp. 6147-6156, Journal of Mechanical Science and Technology, C1

A coupled yield criterion for anisotropic hardening with analytical description under associated flow rule: modeling and validation

Q Hu, J Yoon, N Manopulo, P Hora

(2021), Vol. 136, pp. 1-31, International journal of plasticity, Amsterdam, The Netherlands, C1

Machine learning-based constitutive model for J2- plasticity

D Jang, P Fazily, J Yoon

(2021), Vol. 138, International Journal of Plasticity, C1

A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading

Y Lou, J Yoon

(2021), Vol. 217-218, pp. 48-59, International Journal of Solids and Structures, C1

Robust characterization of anisotropic shear fracture strains with constant triaxiality using shape optimization of torsional twin bridge specimen

Y Kim, S Zhang, V Grolleau, C Roth, D Mohr, J Yoon

(2021), Vol. 70, pp. 211-214, CIRP Annals, C1

Analytical determination of anisotropic parameters for Poly6 yield function

Q Hu, J Yoon, T Stoughton

(2021), Vol. 201, International Journal of Mechanical Sciences, C1

Analytical description of an asymmetric yield function (Yoon2014) by considering anisotropic hardening under non-associated flow rule

Q Hu, J Yoon

(2021), Vol. 140, International Journal of Plasticity, C1

Prediction of ballooning and burst for nuclear fuel cladding with anisotropic creep modeling during Loss of Coolant Accident (LOCA)

J Kim, J Yoon, H Kim, S Lee

(2021), Vol. 53, pp. 3379-3397, Nuclear Engineering and Technology, C1-1

Finite Element Modeling for Orthogonal Machining of AA2024-T351 Alloy With an Advanced Fracture Criterion

P Paresi, A Narayanan, Y Lou, J Yoon

(2021), Vol. 143, pp. 1-15, Journal of Manufacturing Science and Engineering, Transactions of the ASME, New York, N.Y., C1

A new approach for fracture prediction considering general anisotropy of metal sheets

N Park, T Stoughton, J Yoon

(2020), Vol. 124, pp. 199-225, International journal of plasticity, Amsterdam, The Netherlands, C1

A multiplicative plastic hardening model in consideration of strain softening and strain rate: Theoretical derivation and characterization of model parameters with simple tension and creep test

H Kim, J Yoon, K Chung, M Lee

(2020), Vol. 187, International Journal of Mechanical Sciences, C1

Strength modeling of sheet metals from shear to plane strain tension

Y Lou, S Zhang, J Yoon

(2020), Vol. 134, International Journal of Plasticity, C1

Development of MERCURY for simulation of multidimensional fuel behavior for LOCA condition

H Kim, S Lee, J Kim, J Yoon

(2020), Vol. 369, Nuclear Engineering and Design, C1-1

Stress integration-based on finite difference method and its application for anisotropic plasticity and distortional hardening under associated and non-associated flow rules

H Choi, J Yoon

(2019), Vol. 345, pp. 123-160, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1

Evolution of residual stress distortion of a machined product for AA7085

H Choi, J Yoon, Y Kwon, D Seong

(2019), Vol. 13, pp. 123-131, Production Engineering, C1

Alternative approach to model ductile fracture by incorporating anisotropic yield function

Y Lou, J Yoon

(2019), Vol. 164, pp. 12-24, International journal of solids and structures, Amsterdam, The Netherlands, C1

A reduced Yld2004 function for modeling of anisotropic plastic deformation of metals under triaxial loading

Y Lou, S Zhang, J Yoon

(2019), Vol. 161-162, International Journal of Mechanical Sciences, C1

Combined anisotropic and distortion hardening to describe directional response with Bauschinger effect

E Lee, H Choi, T Stoughton, J Yoon

(2019), Vol. 122, pp. 73-88, International journal of plasticity, Amsterdam, The Netherlands, C1

A criterion for general description of anisotropic hardening considering strength differential effect with non-associated flow rule

N Park, T Stoughton, J Yoon

(2019), Vol. 121, pp. 76-100, International journal of plasticity, Amsterdam, The Netherlands, C1

Enhanced Constitutive Model for Aeronautic Aluminium Alloy (AA2024-T351) under High Strain Rates and Elevated Temperatures

P Paresi, Y Lou, A Narayanan, J Yoon

(2019), Vol. 20, pp. 79-87, International Journal of Automotive Technology, SOUTH KOREA, C1

On the efficiency and accuracy of stress integration algorithms for constitutive models based on non-associated flow rule

H Hippke, N Manopulo, J Yoon, P Hora

(2018), Vol. 11, pp. 239-246, International journal of material forming, Paris, France, C1

Study on springback from thermal-mechanical boundary condition imposed to V-bending and L-bending processes coupled with infrared rays local heating

E Lee, J Yoon, D Yang

(2018), pp. 1-17, International Journal of Material Forming, Paris, France, C1

Anisotropic yield function based on stress invariants for BCC and FCC metals and its extension to ductile fracture criterion

Y Lou, J Yoon

(2018), Vol. 101, pp. 125-155, International journal of plasticity, Amsterdam, The Netherlands, C1

Anisotropic fracture forming limit diagram considering non-directionality of the equi-biaxial fracture strain

Namsu Park, H Huh, J Yoon

(2018), Vol. 151, pp. 181-194, International journal of solids and structures, Amsterdam, The Netherlands, C1

Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio

Y Lou, J Yoon, H Huh, Q Chao, J Song

(2018), Vol. 146-147, pp. 583-601, International Journal of Mechanical Sciences, Higashi Hiroshima, JAPAN, C1

Plastic anisotropy and failure in thin metal: material characterization and fracture prediction with an advanced constitutive model and polar EPS (effective plastic strain) fracture diagram for AA 3014-H19

R Dick, J Yoon

(2018), Vol. 151, pp. 195-213, International journal of solids and structures, Amsterdam, The Netherlands, C1

Kinematic hardening model considering directional hardening response

E Lee, T Stoughton, J Yoon

(2018), Vol. 110, pp. 145-165, International journal of plasticity, Amsterdam, The Netherlands, C1

A manufacturing process using the infrared ray local heating method for seat cross members

E Lee, D Yang, J Yoon, W Yang

(2017), Vol. 89, pp. 3299-3305, International journal of advanced manufacturing technology, Berlin, Germany, C1

Crushing response of square aluminium tubes filled with polyurethane foam and aluminium honeycomb

R Hussein, D Ruan, G Lu, S Guillow, J Yoon

(2017), Vol. 110, pp. 140-154, Thin-walled structures, Amsterdam, The Netherlands, C1

Bending behavior to fracture of an aluminium alloy involving pre-strain

A Pradeau, S Thuillier, J Yoon

(2017), Vol. 725, pp. 495-501, Key engineering materials, Higashi-Hiroshima City, Japan, C1

Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals

Y Lou, L Chen, T Clausmeyer, A Tekkaya, J Yoon

(2017), Vol. 112, pp. 169-184, International journal of solids and structures, Amsterdam, The Netherlands, C1

Anisotropic ductile fracture criterion based on linear transformation

Y Lou, J Yoon

(2017), Vol. 93, pp. 3-25, International journal of plasticity, Amsterdam, The Netherlands, C1

A new strategy to describe nonlinear elastic and asymmetric plastic behaviors with one yield surface

E-H Lee, T Stoughton, J Yoon

(2017), Vol. 98, pp. 217-238, International journal of plasticity, Kidlington, Eng., C1

A yield criterion through coupling of quadratic and non-quadratic functions for anisotropic hardening with non-associated flow rule

E-H Lee, T Stoughton, J Yoon

(2017), Vol. 99, pp. 120-143, International journal of plasticity, Kidlington, Eng., C1

Stress based prediction of formability and failure in incremental sheet forming

M Haque, J Yoon

(2016), Vol. 9, pp. 413-421, International journal of material forming, Berlin, Germany, C1

Prediction of failure in bending of an aluminium sheet alloy

A Pradeau, S Thuillier, J Yoon

(2016), Vol. 119, pp. 23-35, International journal of mechanical sciences, Amsterdam, The Netherlands, C1

Path-independent forming limit models for multi-stage forming processes

R Dick, J Yoon, T Stoughton

(2016), Vol. 9, pp. 327-337, International Journal of Material Forming, Melbourne, AUSTRALIA, C1

Benchmark 3 - Springback of an Al-Mg alloy in warm forming conditions

P Manach, J Coër, A Laurent, J Yoon

(2016), Vol. 734, Journal of Physics: Conference Series, Bristol, ENGLAND, C1

Strain rate effect of high purity aluminum single crystals: experiments and simulations

A Khan, J Liu, J Yoon, R Nambori

(2015), Vol. 67, pp. 39-52, International journal of plasticity, Amsterdam, The Netherlands, C1

An experimental study of square aluminium tubes with honeycomb core subjected to quasi-static compressive loads

R Hussein, D Ruan, J Yoon

(2015), Vol. 626, pp. 91-96, Key engineering materials, Pfaffikon, Switzerland, C1

A non-associated plasticity model with anisotropic and nonlinear kinematic hardening for simulation of sheet metal forming

A Taherizadeh, D Green, J Yoon

(2015), Vol. 69-70, pp. 370-382, International journal of solids and structures, Amsterdam, The Netherlands, C1

Anisotropic behavior in plasticity and ductile fracture of an aluminum alloy

Y Lou, J Yoon

(2015), Vol. 651-653, pp. 163-168, Key engineering materials, Zurich, Switzerland, C1

Modeling the effect of asymmetric rolling on mechanical properties of Al-Mg alloys

J De Almeida Grácio, G Vincze, J Yoon, R Cardoso, E Rauch, F Barlat

(2015), Vol. 86, pp. 922-931, Steel research international, London, Eng., C1

Necking behavior of AA 6022-T4 based on the crystal plasticity and damage models

J Kim, J Yoon

(2015), Vol. 73, pp. 3-23, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Study on yield function and plastic potential under non-associated flow for accurate earing prediction in cup drawing

M Paulino, J Yoon

(2015), Vol. 86, pp. 852-860, Steel research international, London, Eng., C1

Wrinkling during cup drawing with NUMISHEET2014 benchmark test

R Dick, J Yoon

(2015), Vol. 86, pp. 915-921, Steel research international, London, Eng., C1

Numerical modeling and analysis for forming process of dual-phase 980 steel exposed to infrared local heating

E-H Lee, D-Y Yang, J Yoon, W-H Yang

(2015), Vol. 75-76, pp. 211-224, International journal of solids and structures, Amsterdam, The Netherlands, C1

Rate-dependent hardening model for pure titanium considering the effect of deformation twinning

Kwanghyun Ahn, Hoon Huh, Jonghun Yoon

(2015), Vol. 98, pp. 80-92, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, C1-1

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Y Lou, J Yoon, H Huh

(2014), Vol. 54, pp. 56-80, International journal of plasticity, Amsterdam, The Netherlands, C1

Asymmetric yield function based on the stress invariants for pressure sensitive metals

J Yoon, Y Lou, J Yoon, M Glazoff

(2014), Vol. 56, pp. 184-202, International journal of plasticity, Amsterdam, The Netherlands, C1

Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation

M Safaei, J Yoon, W De Waele

(2014), Vol. 58, pp. 219-238, International journal of plasticity, Amsterdam, The Netherlands, C1

Suppression of necking in incremental sheet forming

D Seong, M Haque, J Kim, T Stoughton, J Yoon

(2014), Vol. 51, pp. 2840-2849, International journal of solids and structures, London, England, C1

Kinematics of Portevin-Le Chatelier bands in simple shear

P Manach, S Thuillier, J Yoon, J Coër, H Laurent

(2014), Vol. 58, pp. 66-83, International Journal of Plasticity, Amsterdam, The Netherlands, C1-1

On the elasto-plastic buckling of integrally stiffened panels (ISP) joined by friction stir welding (FSW): numerical simulation and optimization algorithms

J Caseiro, R Valente, A Andrade-Campos, J Yoon

(2013), Vol. 76, pp. 49-59, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

Bifurcation instability of sheet metal during spring-back

J Kim, D Yang, J Yoon

(2013), Vol. 93, pp. 1914-1935, Philosophical magazine, Abingdon, Eng., C1-1

Failure prediction in the hole-flanging process of aluminium alloys

A Kacem, A Krichen, P Manach, S Thuillier, J Yoon

(2013), Vol. 99, pp. 251-265, Engineering fracture mechanics, Oxford, England, C1-1

Consideration of strength differential effect in sheet metals with symmetric yield functions

Y Lou, H Huh, J Yoon

(2013), Vol. 66, pp. 214-223, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

Subspace analysis to alleviate the volumetric locking in the 3D solid-shell EFG method

A Graça, R Cardoso, J Yoon

(2013), Vol. 246, pp. 185-194, Journal of computational and applied mathematics, Amsterdam, The Netherlands, C1-1

A comparison of EFGM and FEM for nonlinear solid mechanics problems

R Kumar, I Singh, B Mishra, R Cardoso, J Yoon

(2013), Vol. 535-536, pp. 434-437, Key Engineering Materials, Pfaffikon, Switzerland, C1-1

Strain hardening model of pure titanium considering effects of deformation twinning

Kwanghyun Ahn, Hoon Huh, Jonghun Yoon

(2013), Vol. 19, pp. 749-758, METALS AND MATERIALS INTERNATIONAL, C1-1

Path independent forming limits in strain and stress spaces

T Stoughton, J Yoon

(2012), Vol. 49, pp. 3616-3625, International journal of solids and structures, Amsterdam, The Netherlands, C1-1

Simulation of earing behaviors in bake hardening steel exhibiting a strong off-γ-fiber component

E Kim, S Choi, E Shin, J Yoon

(2012), Vol. 49, pp. 3573-3581, International journal of solids and structures, Amsterdam, The Netherlands, C1-1

Biaxial deformation behaviour of AZ31 magnesium alloy: crystal-plasticity- based prediction and experimental validation

D Steglich, Y Jeong, M Andar, T Kuwabara

(2012), Vol. 49, pp. 3551-3561, International journal of solids and structures, Amsterdam, The Netherlands, C1-1

Buckling analysis for an integrally stiffened panel structure with a friction stir weld

J Yoon, G Bray, R Valente, T Childs

(2011), Vol. 47, pp. 1608-1622, Thin-walled structures, Amsterdam, The Netherlands, C1-1

Evaluation of advanced anisotropic models with mixed hardening for general associated and non-associated flow metal plasticity

A Taherizadeh, D Green, J Yoon

(2011), Vol. 27, pp. 1781-1802, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Gripless nanotension test for determination of nano-scale properties

D Yang, T Lim, Y Son, F Barlat, J Yoon

(2011), Vol. 27, pp. 1527-1536, International journal of plasticity, Amsterdam, The Netherlands, C1-1

A new analytical theory for earing generated from anisotropic plasticity

J Yoon, R Dick, F Barlat

(2011), Vol. 27, pp. 1165-1184, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Elasto-plastic buckling of integrally stiffened panels (ISP) : an optimization approach for the design of cross-section profiles

J Caseiro, R Valente, A Andrade-Campos, J Yoon

(2011), Vol. 49, pp. 864-873, Thin-walled structures, Amsterdam, The Netherlands, C1-1

Strain-rate potential based elastic/plastic anisotropic model for metals displaying tension-compression asymmetry

J Yoon, O Cazacu, J Yoon

(2011), Vol. 200, pp. 1993-2004, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1-1

A new approach for failure criterion for sheet metals

T Stoughton, J Yoon

(2011), Vol. 27, pp. 440-459, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Effect of anisotropic yield functions on the accuracy of hole expansion simulations

T Kuwabara, K Hashimoto, E Iizuka, J Yoon

(2011), Vol. 211, pp. 475-481, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Genetic alterations of the CHOP gene in gastric cancers

Jae Song, Jong Park, Jeong Yoon, Suk Nam, Jung Lee, Won Park

(2011), Vol. 7, pp. 1-6, MOLECULAR & CELLULAR TOXICOLOGY, C1

Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature

G Gilles, W Hammami, V Libertiaux, O Cazacu, J Yoon, T Kuwabara, A Habraken, L Duchene

(2011), Vol. 48, pp. 1277-1289, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, C1-1

A novel approach for anisotropic hardening modeling. Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material

G Rousselier, F Barlat, J Yoon

(2010), Vol. 26, pp. 1029-1049, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Orthotropic strain rate potential for the description of anisotropy in tension and compression of metals

O Cazacu, I Ionescu, J Yoon

(2010), Vol. 26, pp. 887-904, International journal of plasticity, Amsterdam, The Netherlands, C1-1

New anisotropic strain-rate potential for hexagonal metals

O Cazacu, J Yoon, J Yoon

(2010), Vol. 3, pp. 227-230, International journal of material forming, Paris, France, C1-1

A polycrystal model to evaluate mechanical properties of asymmetrically rolled al sheets

R Alves de Sousa, F Simões, J Grácio, J Yoon

(2010), Vol. 3, pp. 61-64, International journal of material forming, Paris, France, C1-1

On an innovative optimization approach for the design of cross-section profiles of integrally stiffened panels subjected to elasto-plastic buckling deformation modes

J Caseiro, R Valente, A Andrade-Campos, J Yoon

(2010), Vol. 3, pp. 49-52, International journal of material forming, Paris, France, C1-1

Hole expansion simulation of high strength steel sheet

K Hashimoto, T Kuwabara, E Iizuka, J Yoon

(2010), Vol. 3, pp. 259-262, International journal of material forming, Paris, France, C1-1

A non-associated constitutive model with mixed iso-kinematic hardening for finite element simulation of sheet metal forming

A Taherizadeh, D Green, A Ghaei, J Yoon

(2010), Vol. 26, pp. 288-309, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Puncture fracture in an aluminum beverage can

J Yoon, R Cardoso, R Dick

(2010), Vol. 37, pp. 150-160, International journal of impact engineering, Oxford, England, C1-1

A new axi-symmetric element for thin walled structures

R Cardoso, J Yoon, R Dick

(2010), Vol. 45, pp. 281-296, Computational mechanics, Heidelberg, Germany, C1-1

Earing predictions for strongly textured aluminum sheets

J Yoon, O Cazacu, J Yoon, R Dick

(2010), Vol. 52, pp. 1563-1578, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

Effect of anisotropie yield functions on the accuracy of hole expansion simulations for 590 MPa grade steel sheet

K Hashimoto, T Kuwabara, E Iizuka, J Yoon

(2010), Vol. 96, pp. 557-563, Tetsu to hagane, Tokyo, Japan, C1-1

Microstructural evolution and its effect on mechanical properties of commercially pure aluminum deformed by ECAE (equal channel angular extrusion) via routes A and C

K Kim, D Yang, J Yoon

(2010), Vol. 527, pp. 7927-7930, Materials science and engineering A, Lausanne, Switzerland, C1-1

Effect of Anisotropic Yield Functions on the Accuracy of Hole Expansion Simulations for 590 MPa Grade Steel Sheet

Kazuma Hashimoto, Toshihiko Kuwbara, Eiji Iizuka, Jeong-Whan Yoon

(2010), Vol. 96, pp. B27-B33, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, C1

Phospholipase D1 Drives a Positive Feedback Loop to Reinforce the Wnt/beta-Catenin/TCF Signaling Axis

Dong Kang, Soung-Hoon Lee, Jeong Yoon, Won-Sang Park, Kang-Yell Choi, Do Min

(2010), Vol. 70, pp. 4233-4242, CANCER RESEARCH, United States, C1

Effect of asymmetrical rolling and annealing on the mechanical response of an AA1050-O sheet

F Simões, R Alves de Sousa, J Grácio, F Barlat, J Yoon

(2009), Vol. 2, pp. 891-894, International journal of material forming, Paris, France, C1-1

A novel approach for anisotropic hardening modeling. Part I: Theory and its application to finite element analysis of deep drawing

G Rousselier, F Barlat, J Yoon

(2009), Vol. 25, pp. 2383-2409, International journal of plasticity, Amsterdam, The Netherlands, C1-1

A novel approach for modeling of anisotropic hardening and non proportional loading paths, application to finite element analysis of deep drawing

G Rousselier, F Barlat, J Yoon

(2009), Vol. 2, pp. 367-370, International journal of material forming, Paris, France, C1-1

Comparsion of forming and fracture limits of an aluminum alloy and austenitic stainless steel

A Korhonen, T Manninen, J Yoon, J Larkiola

(2009), Vol. 2, pp. 431-434, International journal of material forming, Paris, France, C1-1

Development of ultrafine-grained aluminum tubes using severe plastic deformation process

K Kim, J Yoon, D Yang

(2009), Vol. 33, pp. 1087-1090, Transactions of the Korean society of mechanical engineers, A, Seoul, Korea, C1-1

Interplay between plastic deformations and optical properties of metal surfaces : a multiscale study

M Glazoff, S Rashkeev, Y Pyt'Ev, J Yoon, S Sheu

(2009), Vol. 95, pp. 1-3, Applied physics letters, College Park, Md., C1-1

Stress integration method for a nonlinear kinematic/isotropic hardening model and its characterization based on polycrystal plasticity

R Cardoso, J Yoon

(2009), Vol. 25, pp. 1684-1710, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Modeling of anisotropic plastic behavior of ferritic stainless steel sheet

D Ahn, J Yoon, K Kim

(2009), Vol. 51, pp. 718-725, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

Anisotropic hardening and non-associated flow in proportional loading of sheet metals

T Stoughton, J Yoon

(2009), Vol. 25, pp. 1777-1817, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Investigation of Elongation at Fracture in a High Speed Sheet Metal Forming Process

H Huh, S Kim, J Song, J Yoon, J Lim, S Park

(2009), Vol. 80, pp. 316-322, STEEL RESEARCH INTERNATIONAL, C1-1

Mechanical behavior of an asymmetrically rolled and annealed 050-O heet

F Simões, R Alves de Sousa, J Grácio, F Barlat, J Yoon

(2008), Vol. 50, pp. 1372-1380, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

Enhanced assumed strain (EAS) and assumed natural strain (ANS) methods for one-point quadrature solid-shell elements

R Cardoso, J Yoon, M Mahardika, S Choudhry, R Alves de Sousa, R Valente

(2008), Vol. 75, pp. 156-187, International journal for numerical methods in engineering, Chichester, England, C1-1

Analytical approach to predict anisotropic material properties from cup drawings

J Yoon, R Dick, F Barlat

(2008), Vol. 1, pp. 301-304, International journal of material forming, Paris, France, C1-1

Investigation of microstructure characteristics of commercially pure aluminum during equal channel angular extrusion

K Kim, D Yang, J Yoon

(2008), Vol. 485, pp. 621-626, Materials science and engineering A, Lausanne, Switzerland, C1-1

On the use of homogeneous polynomials to develop anisotropic yield functions with applications to sheet forming

S Soare, J Yoon, O Cazacu

(2008), Vol. 24, pp. 915-944, International journal of plasticity, Amsterdam, The Netherlands, C1-1

On the existence of indeterminate solutions to the equations of motion under non-associated flow

T Stoughton, J Yoon

(2008), Vol. 24, pp. 583-613, International journal of plasticity, Amsterdam, The Netherlands, C1-1

One point quadrature shell elements: a study on convergence and patch tests

R Cardoso, J Yoon

(2007), Vol. 40, pp. 871-883, Computational mechanics, Berlin, Germany, C1-1

Enhanced one-point quadrature shell element for nonlinear applications

R Cardoso, J Yoon, R Valente

(2007), Vol. 69, pp. 627-663, International journal for numerical methods in engineering, London, Eng., C1-1

On the use of a reduced enhanced solid-shell (RESS) element for sheet forming simulations

R Alves de Sousa, J Yoon, R Cardoso, R Fontes Valente, J Grácio

(2007), Vol. 23, pp. 490-515, International journal of plasticity, Amsterdam, The Netherlands, C1-1

On linear transformations of stress tensors for the description of plastic anisotropy

F Barlat, J Yoon, O Cazacu

(2007), Vol. 23, pp. 876-896, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Prediction of six or eight ears in a drawn cup based on a new anisotropic yield function

J Yoon, F Barlat, R Dick, M Karabin

(2006), Vol. 22, pp. 174-193, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Modeling of aluminum alloy sheets based on new anisotropic yield functions

J Yoon, S Hong

(2006), Vol. 177, pp. 134-137, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Design optimization of extruded preform for hydroforming processes based on ideal forming design theory

J Yoon, K Chung, F Pourboghrat, F Barlat

(2006), Vol. 48, pp. 1416-1428, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness - part II: nonlinear applications

R Alves de Sousa, R Cardoso, R Fontes Valente, J Yoon, J Grácio, R Natal Jorge

(2006), Vol. 67, pp. 160-188, International journal for numerical methods in engineering, London, Eng., C1-1

A new approach to reduce membrane and transverse shear locking for one-point quadrature shell elements: linear formulation

R Cardoso, J Yoon, R Valente

(2006), Vol. 66, pp. 214-249, International journal for numerical methods in engineering, London, Eng., C1-1

Review of Drucker's postulate and the issue of plastic stability in metal forming

T Stoughton, J Yoon

(2006), Vol. 22, pp. 391-433, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets

J Yoon, F Barlat, J Gracio, E Rauch

(2005), Vol. 21, pp. 2426-2447, International journal of plasticity, Amsterdam, The Netherlands, C1-1

A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: part I - geometrically linear applications

R Alves de Sousa, R Cardoso, R Fontes Valente, J Yoon, J Grácio, R Natal Jorge

(2005), Vol. 62, pp. 952-977, International journal for numerical methods in engineering, Chichester, Eng., C1-1

Sheet metal formability analysis for anisotropic materials under non-proportional loading

T Stoughton, J Yoon

(2005), Vol. 47, pp. 1972-2002, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

Linear transfomation-based anisotropic yield functions

F Barlat, H Aretz, J Yoon, M Karabin, J Brem, R Dick

(2005), Vol. 21, pp. 1009-1039, International journal of plasticity, Amsterdam, The Netherlands, C1-1

One point quadrature shell element with through-thickness stretch

R Cardoso, J Yoon

(2005), Vol. 194, pp. 1161-1199, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1-1

Incorporation of sheet-forming effects in crash simulations using ideal forming theory and hybrid membrane and shell method

H Ryou, K Chung, J Yoon, C Han, J Youn, T Kang

(2005), Vol. 127, pp. 182-192, Journal of manufacturing science and engineering, New York, N.Y., C1-1

One point quadrature shell elements for sheet metal forming analysis

R Cardoso, J Yoon

(2005), Vol. 12, pp. 3-66, Archives of computational methods in engineering, Dordrecht, The Netherlands, C1-1

Plane stress yield function for aluminum alloy sheets - part II: FE formulation and its implementation

J Yoon, F Barlat, R Dick, K Chung, T Kang

(2004), Vol. 20, pp. 495-522, International journal of plasticity, Amsterdam, The Netherlands, C1-1

A pressure-sensitive yield criterion under a non-associated flow rule for sheet metal forming

T Stoughton, J Yoon

(2004), Vol. 20, pp. 705-731, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Plane stress yield function for aluminum alloy sheets - part 1: theory

F Barlat, J Brem, J Yoon, K Chung, R Dick, D Lege, F Pourboghrat, S-H Choi, E Chu

(2003), Vol. 19, pp. 1297-1319, International journal of plasticity, Kidlington, Eng., C1-1

Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory

J Kim, J Yoon, D Yang

(2003), Vol. 56, pp. 1673-1705, International journal for numerical methods in engineering, Chichester, Eng., C1-1

Riemannian algebras of low dimension

H Myung, J Yoon

(2003), Vol. 31, pp. 1515-1544, COMMUNICATIONS IN ALGEBRA, C1-1

Springback prediction for sheet metal forming process using a 3D hybrid membrane/shell method

J Yoon, F Pourboghrat, K Chung, D Yang

(2002), Vol. 44, pp. 2133-2153, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

Development of a one point quadrature shell element for nonlinear applications with contact and anisotropy

R Cardoso, J Yoon, J Grácio, F Barlat, J César De Sá

(2002), Vol. 191, pp. 5177-5206, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1-1

Investigation into wrinkling behavior in the elliptical cup deep drawing process by finite element analysis using bifurcation theory

J Kim, J Yoon, D Yang, F Barlat

(2001), Vol. 111, pp. 170-174, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Ideal sheet forming with frictional constraints

K Chung, J Yoon, O Richmond

(2000), Vol. 16, pp. 595-610, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Earing predictions based on asymmetric nonquadratic yield function

J Yoon, F Barlat, K Chung, F Pourboghrat, D Yang

(2000), Vol. 16, pp. 1075-1104, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Effect of plastic anisotropy on compressive instability in sheet metal forming

J Kim, D Yang, J Yoon, F Barlat

(2000), Vol. 16, pp. 649-676, International journal of plasticity, Amsterdam, The Netherlands, C1-1

Wrinkling initiation and growth in modified Yoshida buckling test: finite element analysis and experimental comparison

J Kim, J Yoon, D Yang

(2000), Vol. 42, pp. 1683-1714, International journal of mechanical sciences, Amsterdam, The Netherlands, C1-1

A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming

J Yoon, D Yang, K Chung, F Barlat

(1999), Vol. 15, pp. 35-67, International journal of plasticity, Kidlington, Eng., C1-1

Optimum blank design in sheet metal forming by the deformation path iteration method

S Park, J Yoon, D Yang, Y Kim

(1999), Vol. 41, pp. 1217-1232, International journal of mechanical sciences, Kidlington, Eng., C1-1

Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials

J Yoon, D Yang, K Chung

(1999), Vol. 174, pp. 23-56, Computer methods in applied mechanics and engineering, Amsterdam, The Netherlands, C1-1

Comparative investigation into the dynamic explicit and the static implicit method for springback of sheet metal stamping

S Lee, J Yoon, D Yang

(1999), Vol. 16, pp. 347-373, Engineering computations, Bingley, Eng., C1-1

A stress integration algorithm for plane stress elastoplasticity and its applications to explicit finite element analysis of sheet metal forming processes

S Lee, J Yoon, D Yang

(1998), Vol. 66, pp. 301-311, Computers and structures, Amsterdam, The Netherlands, C1-1

Influence of initial back stress on the earing prediction of drawn cups for planar anisotropic aluminum sheets

J Yoon, F Barlat, K Chung, F Pourboghrat, D Yang

(1998), Vol. 80-81, pp. 433-437, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Finite element method for sheet forming based on an anisotropic strain-rate potential and the convected coordinate system

J Yoon, I Song, D Yang, K Chung, F Barlat

(1995), Vol. 37, pp. 733-752, International journal of mechanical sciences, Kidlington, Eng., C1-1

Finite-element analysis and design of binder wraps for automobile sheet metal parts using surface boundary condition

I Song, D Yoo, J Yoon, D Yang, H Huh, J Lee

(1995), Vol. 4, pp. 593-598, Journal of materials engineering and performance, New York, N.Y., C1-1