Prof Ian Gibson

Framework for additive manufacturing of porous Inconel 718 for electrochemical applications

A Zafari, K Kiran, I Gimenez-Garcia, K Xia, I Gibson, D Jafari

(2024), Vol. 237, pp. 1-14, Materials and Design, Amsterdam, The Netherlands, C1-1

Tailoring mechanical properties in 3D printed multimaterial architected structures

M Mehrpouya, A Ghalayaniesfahani, J Postmes, I Gibson

(2024), Vol. 152, pp. 1-6, Journal of the Mechanical Behavior of Biomedical Materials, Amsterdam, The Netherlands, C1-1

Impact of powder reusability on batch repeatability of Ti6Al4V ELI for PBF-LB industrial production

L Cordova, C Sithole, E Macía Rodríguez, I Gibson, M Campos

(2023), Vol. 66, pp. 129-138, Powder Metallurgy, London, Eng., C1-1

Laser subtractive and laser powder bed fusion of metals: review of process and production features

M Khorasani, I Gibson, A Ghasemi, E Hadavi, B Rolfe

(2023), Vol. 29, pp. 1-24, Rapid Prototyping Journal, Bingley, Eng., C1

Estimating minimum required dwell time for the heat sealing of talc containing polypropylene/low-density polyethylene packaging films

I Ilhan, M van Drongelen, R ten Klooster, I Gibson

(2023), Vol. 36, pp. 349-361, Packaging Technology and Science, London, Eng., C1-1

Effects of film tension and contamination on the seal quality of flexible food packaging films made of polypropylene and low density polyethylene blends containing talc filler

I Ilhan, R ten Klooster, I Gibson

(2023), Vol. 36, pp. 55-64, Packaging Technology and Science, C1-1

Legal issues and underexplored data protection in medical 3D printing: A scoping review

A Pettersson, R Ballardini, M Mimler, P Li, M Salmi, T Minssen, I Gibson, A Mäkitie

(2023), Vol. 11, pp. 1-8, Frontiers in Bioengineering and Biotechnology, Lausanne, Switzerland, C1-1

Benchmark models for conduction and keyhole modes in laser-based powder bed fusion of Inconel 718

M Khorasani, A Ghasemi, M Leary, D Downing, I Gibson, E Sharabian, J Veetil, M Brandt, S Bateman, B Rolfe

(2023), Vol. 164, pp. 1-13, Optics and Laser Technology, Amsterdam, The Netherlands, C1

Numerical and experimental investigations on manufacturability of Al-Si-10Mg thin wall structures made by LB-PBF

M Khorasani, M Leary, D Downing, J Rogers, A Ghasemi, I Gibson, S Brudler, B Rolfe, M Brandt, S Bateman

(2023), Vol. 188, pp. 1-18, Thin Walled Structures, Amsterdam, The Netherlands, C1

Towards more homogeneous character in 3D printed photopolymers by the addition of nanofillers

M Robakowska, I Gibson, R Akkerman, F Wurm, H Gojzewski

(2023), Vol. 129, pp. 1-10, Polymer Testing, Amsterdam, The Netherlands, C1-1

Additive manufacturing a powerful tool for the aerospace industry

M Khorasani, A Ghasemi, B Rolfe, I Gibson

(2022), Vol. 28, pp. 87-100, Rapid Prototyping Journal, Bingley, Eng., C1

A comprehensive study on meltpool depth in laser-based powder bed fusion of Inconel 718

M Khorasani, A Ghasemi, M Leary, L Cordova, E Sharabian, E Farabi, I Gibson, M Brandt, B Rolfe

(2022), Vol. 120, pp. 2345-2362, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1

A comprehensive investigation of abrasive barrel finishing on hardness and manufacturability of laser-based powder bed fusion hollow components

M Khorasani, A Ghasemi, E Farabi, M Leary, I Gibson, B Rolfe

(2022), pp. 1-20, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1

A review of Industry 4.0 and additive manufacturing synergy

M Khorasani, J Loy, A Ghasemi, E Sharabian, M Leary, H Mirafzal, P Cochrane, B Rolfe, I Gibson

(2022), pp. 1-14, Rapid Prototyping Journal, Bingley, Eng., C1

The effect of absorption ratio on meltpool features in laser-based powder bed fusion of IN718

M Khorasani, A Ghasemi, M Leary, E Sharabian, L Cordova, I Gibson, D Downing, S Bateman, M Brandt, B Rolfe

(2022), Vol. 153, pp. 1-14, Optics and Laser Technology, Amsterdam, The Netherlands, C1

Multimaterial powder bed fusion techniques

M Mehrpouya, D Tuma, T Vaneker, M Afrasiabi, M Bambach, I Gibson

(2022), Vol. 28, pp. 1-19, Rapid Prototyping Journal, Bingley, Eng., C1-1

Sandwich structure printing of Ti-Ni-Ti by directed energy deposition

A Farzaneh, M Khorasani, E Farabi, I Gibson, M Leary, A Ghasemi, B Rolfe

(2022), Vol. 17, pp. 1006-1030, Virtual and Physical Prototyping, London, Eng., C1

Subject-Related Research Metrics in Different Scientometrics Platforms

M Khorasani, J Veetil, A Ghasemi, I Gibson

(2022), Vol. 22, pp. 517-546, Portal, Baltimore, Md., C1-1

Build position-based dimensional deviations of laser powder-bed fusion of stainless steel 316L

J Veetil, M Khorasani, A Ghasemi, B Rolfe, I Vrooijink, K Van Beurden, S Moes, I Gibson

(2021), Vol. 67, pp. 58-68, Precision Engineering, C1

A critical review of corrosion characteristics of additively manufactured stainless steels

M Laleh, A Hughes, W Xu, I Gibson, M Tan

(2021), Vol. 66, pp. 563-599, International Materials Reviews, C1

On the role of process parameters on meltpool temperature and tensile properties of stainless steel 316L produced by powder bed fusion

M Khorasani, A Ghasemi, U Awan, S Singamneni, G Littlefair, E Farabi, M Leary, I Gibson, J Veetil, B Rolfe

(2021), Vol. 12, pp. 2438-2452, Journal of Materials Research and Technology, C1

Numerical and analytical investigation on meltpool temperature of laser-based powder bed fusion of IN718

M Khorasani, A Ghasemi, M Leary, W O'Neil, I Gibson, L Cordova, B Rolfe

(2021), Vol. 177, International Journal of Heat and Mass Transfer, C1

Understanding the factors affecting the seal integrity in heat sealed flexible food packages: A review

Ilknur Ilhan, Deniz Turan, Ian Gibson, Roland ten Klooster

(2021), Vol. 34, pp. 321-337, Packaging Technology and Science, London, Eng., C1-1

Modelling of laser powder bed fusion process and analysing the effective parameters on surface characteristics of Ti-6Al-4V

A Khorasani, I Gibson, A Ghasemi, A Ghaderi

(2020), Vol. 168, pp. 1-14, International Journal of Mechanical Sciences, Amsterdam, The Netherlands, C1

Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting

M Laleh, A Hughes, S Yang, J Li, W Xu, I Gibson, M Tan

(2020), Vol. 165, Corrosion Science, C1

A review of laser engineered net shaping (LENS) build and process parameters of metallic parts

M Izadi, A Farzaneh, M Mohammed, I Gibson, B Rolfe

(2020), Vol. 26, pp. 1059-1078, Rapid Prototyping Journal, C1

A review of technological improvements in laser-based powder bed fusion of metal printers

A Khorasani, I Gibson, J Veetil, A Ghasemi

(2020), Vol. 108, pp. 191-209, International Journal of Advanced Manufacturing Technology, London, Eng., C1

Design for additive manufacturing: Framework and methodology

T Vaneker, A Bernard, G Moroni, I Gibson, Y Zhang

(2020), Vol. 69, pp. 578-599, CIRP Annals, C1-1

On the role of wet abrasive centrifugal barrel finishing on surface enhancement and material removal rate of LPBF stainless steel 316L

M Khorasani, I Gibson, A Ghasemi, M Brandt, M Leary

(2020), Vol. 59, pp. 523-534, Journal of Manufacturing Processes, Amsterdam, The Netherlands, C1

A study on surface morphology and tension in laser powder bed fusion of Ti-6Al-4V

M Khorasani, A Ghasemi, U Awan, E Hadavi, M Leary, M Brandt, G Littlefair, W O’Neil, I Gibson

(2020), Vol. 111, pp. 2891-2909, International Journal of Advanced Manufacturing Technology, Berlin, Germany, C1

The effect of SLM process parameters on density, hardness, tensile strength and surface quality of Ti-6Al-4V

A Khorasani, I Gibson, U Awan, A Ghaderi

(2019), Vol. 25, pp. 176-186, Additive manufacturing, Amsterdam, The Netherlands, C1

Oscillation characteristics of low Weber number impinging micro-droplets

S Das, M Mohammed, I Gibson, L Weerasiri, A McDonnell, J Xiang, L Yeo

(2019), Vol. 33, pp. 197-213, Theoretical and computational fluid dynamics, Berlin, Germany, C1

Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts

A Khorasani, I Gibson, A Ghaderi, M Mohammed

(2019), Vol. 101, pp. 3183-3197, International journal of advanced manufacturing technology, London, Eng., C1

Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting

M Laleh, A Hughes, W Xu, I Gibson, M Tan

(2019), Vol. 155, pp. 67-74, Corrosion science, Amsterdam, The Netherlands, C1

A comprehensive study on variability of relative density in selective laser melting of Ti-6Al-4V

A Khorasani, I Gibson, A Ghasemi, A Ghaderi

(2019), Vol. 14, pp. 349-359, Virtual and physical prototyping, Abingdon, Eng., C1

On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting

M Laleh, A Hughes, W Xu, N Haghdadi, K Wang, P Cizek, I Gibson, M Tan

(2019), Vol. 161, Corrosion Science, C1

Directed energy deposition and characterization of high-carbon high speed steels

N Ur Rahman, L Capuano, S Cabeza, M Feinaeugle, A Garcia-Junceda, M de Rooij, D Matthews, G Walmag, I Gibson, G Römer

(2019), Vol. 30, pp. 1-11, Additive Manufacturing, Amsterdam, The Netherlands, C1

An Overview: Laser-Based Additive Manufacturing for High Temperature Tribology

Naveed Ur Rahman, David Matthews, Matthijn de Rooij, Amir Khorasani, Ian Gibson, Laura Cordova, Gert-willem Römer

(2019), Vol. 5, pp. 1-15, Frontiers in Mechanical Engineering, Lausanne, Switzerland, C1

A comprehensive study on surface quality in 5-axis milling of SLM Ti-6Al-4V spherical components

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2018), Vol. 94, pp. 3765-3784, International journal of advanced manufacturing technology, London, Eng., C1

Investigation on the effect of a pre-center drill hole and tool material on thrust force, surface roughness, and cylindricity in the drilling of Al7075.

A Ghasemi, A Khorasani, I Gibson

(2018), Vol. 11, Materials, Basel, Switzerland, C1

Fabrication of polycaprolactone-silanated β-tricalcium phosphate-heparan sulfate scaffolds for spinal fusion applications

G Bhakta, A Ekaputra, B Rai, S Abbah, T Tan, B Le, A Chatterjea, T Hu, T Lin, M Arafat, A van Wijnen, J Goh, V Nurcombe, K Bhakoo, W Birch, L Xu, I Gibson, H Wong, S Cool

(2018), Vol. 18, pp. 818-830, Spine journal, Amsterdam, The Netherlands, C1-1

Mass transfer and flow in additive manufacturing of a spherical component

A Khorasani, I Gibson, M Asadnia, W O Neill

(2018), Vol. 96, pp. 3711-3718, International Journal of Advanced Manufacturing Technology, London, Eng., C1

Augmented patient-specific facial prosthesis production using medical imaging modelling and 3D printing technologies for improved patient outcomes

M Mohammed, B Cadd, G Peart, I Gibson

(2018), Vol. 13, pp. 164-176, Virtual and physical prototyping, Abingdon, Eng., C1

Characterizing the effect of cutting condition, tool path, and heat treatment on cutting forces of selective laser melting spherical component in five-axis milling

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2018), Vol. 140, pp. 1-16, Journal of manufacturing science and engineering, New York, N.Y., C1

Rheological characterization of process parameters influence on surface quality of Ti-6Al-4V parts manufactured by selective laser melting

A Khorasani, I Gibson, A Ghaderi

(2018), Vol. 97, pp. 3761-3775, International journal of advanced manufacturing technology, London, Eng., C1

Design of three-dimensional, triply periodic unit cell scaffold structures for additive manufacturing

Mazher Mohammed, Ian Gibson

(2018), Vol. 140, pp. 1-10, Journal of mechanical design, New York, N.Y., C1

Finding line of action of the force exerted on erect spine based on lateral bending test in personalization of scoliotic spine models

A Jalalian, F Tay, S Arastehfar, I Gibson, G Liu

(2017), Vol. 55, pp. 673-684, Medical & biological engineering & computing, Berlin, Germany, C1

Fabrication of microfluidic devices: Improvement of surface quality of CO2 laser machined poly(methylmethacrylate) polymer

M Mohammed, M Zainal Alam, A Kouzani, I Gibson

(2017), Vol. 27, Journal of Micromechanics and Microengineering, C1

Production of Ti-6Al-4V acetabular shell using selective laser melting: possible limitations in fabrication

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2017), Vol. 23, pp. 110-121, Rapid prototyping journal, Bingley, Eng., C1

The changing face of additive manufacturing

I Gibson

(2017), Vol. 28, pp. 10-17, Journal of manufacturing technology management, Bingley, Eng., C1

On the role of different annealing heat treatments on mechanical properties and microstructure of selective laser melted and conventional wrought Ti-6Al-4V

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2017), Vol. 23, pp. 295-304, Rapid prototyping journal, Bingley, United Kingdom, C1

The effect of vibration during friction stir welding on corrosion behavior, mechanical properties, and machining characteristics of stir zone

S Fouladi, A Ghasemi, M Abbasi, M Abedini, A Khorasani, I Gibson

(2017), Vol. 7, pp. 421-433, Metals, Basel, Switzerland, C1

Analysis of compressive load on intervertebral joint in standing and sitting postures

M Huang, K Hajizadeh, I Gibson, T Lee

(2016), Vol. 24, pp. 215-223, Technology and health care, Amsterdam, The Netherlands, C1

Investigation on the effect of cutting fluid pressure on surface quality measurement in high speed thread milling of brass alloy (C3600) and aluminium alloy (5083)

A Khorasani, I Gibson, M Goldberg, E Doeven, G Littlefair

(2016), Vol. 82, pp. 55-63, Measurement, C1

The influence of various seat design parameters: a computational analysis

M Huang, K Hajizadeh, I Gibson, T Lee

(2016), Vol. 26, pp. 356-366, Human factors and ergonomics In manufacturing, London, Eng., C1

A survey on mechanisms and critical parameters on solidification of selective laser melting during fabrication of Ti-6Al-4V prosthetic acetabular cup

A Khorasani, I Gibson, M Goldberg, G Littlefair

(2016), Vol. 103, pp. 348-355, Materials and design, Amsterdam, The Netherlands, C1

Design for additive manufacturing: trends, opportunities, considerations, and constraints

M Thompson, G Moroni, T Vaneker, G Fadel, R Campbell, I Gibson, A Bernard, J Schulz, P Graf, B Ahuja, F Martina

(2016), Vol. 65, pp. 737-760, CIRP annals - manufacturing technology, Amsterdam, The Netherlands, C1

An improved static model for tool deflection in machining of Ti-6Al-4V acetabular shell produced by selective laser melting

A Khorasani, I Gibson, N Godarzvand Chegini, M Goldberg, A Ghasemi, G Littlefair

(2016), Vol. 92, pp. 534-544, Measurement: journal of the International Measurement Confederation, Amsterdam, The Netherlands, C1

Industry case study: rapid prototype of mountain bike frame section

P Collins, R Leen, I Gibson

(2016), Vol. 11, pp. 295-303, Virtual and physical prototyping, Abingdon, Eng., C1

Evolution of 3D printed soft actuators

A Zolfagharian, A Kouzani, S Khoo, A Moghadam, I Gibson, A Kaynak

(2016), Vol. 250, pp. 258-272, Sensors and actuators A: physical, Amsterdam, The Netherlands, C1

Machinability of metallic and ceramic biomaterials : a review

A Khorasani, I Gibson, M Goldberg, J Nomani, G Littlefair

(2016), Vol. 8, pp. 1491-1511, Science of advanced materials, Stevenson Ranch, Cal., C1

Development and validation of a discretised multi-body spine model in LifeMOD for biodynamic behaviour simulation

K Huynh, I Gibson, B Jagdish, W Lu

(2015), Vol. 18, pp. 175-184, Computer methods in biomechanics and biomedical engineering, Abingdon, Eng., C1-1

Lab-on-a-chip or Chip-in-a-lab: challenges of commercialization lost in translation

M Mohammed, S Haswell, I Gibson

(2015), Vol. 20, pp. 54-59, Procedia technology, Amsterdam, The Netherlands, C1

Design and fabrication of a capacitance based wearable pressure sensor using e-textiles

A Arogbonlo, C Usma, A Kouzani, I Gibson

(2015), Vol. 20, pp. 270-275, Procedia technology, Amsterdam, The Netherlands, C1

Fabrication of force sensor circuits on wearable conductive textiles

C Usma, A Kouzani, J Chua, A Arogbonlo, S Adams, I Gibson

(2015), Vol. 20, pp. 263-269, Procedia technology, Amsterdam, The Netherlands, C1

Improved manufacturing quality and bonding of laser machined microfluidic systems

M Mohammed, K Quayle, R Alexander, E Doeven, Y Nai, S Haswell, A Kouzani, I Gibson

(2015), Vol. 20, pp. 219-224, Procedia technology, Amsterdam, The Netherlands, C1

Influence of fill gap on flexural strength of parts fabricated by curved layer fused deposition modeling

H Guan, M Savalani, I Gibson, O Diegel

(2015), Vol. 20, pp. 243-248, Procedia technology, Amsterdam, The Netherlands, C1

Simplifying medical additive manufacturing: making the surgeon the designer

I Gibson, A Srinath

(2015), Vol. 20, pp. 237-242, Procedia technology, Amsterdam, The Netherlands, C1

Virtual lumbar spine of multi-body model based on simbody

Z Gao, I Gibson, C Ding, J Wang, J Wang

(2015), Vol. 20, pp. 26-31, Procedia technology, Amsterdam, The Netherlands, C1

Effects of scaffold architecture on cranial bone healing

A Berner, M Woodruff, C Lam, M Arafat, S Saifzadeh, R Steck, J Ren, M Nerlich, A Ekaputra, I Gibson, D Hutmacher

(2014), Vol. 43, pp. 506-513, International journal of oral and maxillofacial surgery, Amsterdam, The Netherlands, C1-1

State of the art and future direction of additive manufactured scaffolds-based bone tissue engineering

M Arafat, I Gibson, X Li

(2014), Vol. 20, pp. 13-26, Rapid prototyping journal, Bingley, Eng., C1-1

A novel classification and online platform for planning and documentation of medical applications of additive manufacturing

J Tuomi, K-S Paloheimo, J Vehviläinen, R Björkstrand, M Salmi, E Huotilainen, R Kontio, S Rouse, I Gibson, A Mäkitie

(2014), Vol. 21, pp. 553-559, Surgical Innovation, Thousand Oaks, Calif., C1-1

Computational biomechanical modeling of scoliotic spine : challenges and opportunities

A Jalalian, I Gibson, E Tay

(2013), Vol. 1, pp. 401-411, Spine deformity, Amsterdam, The Netherlands, C1-1

Process and material behavior modeling for a new design of micro-additive fused deposition

M Monzón, I Gibson, A Benítez, L Lorenzo, P Hernández, M Marrero

(2013), Vol. 67, pp. 2717-2726, International journal of advanced manufacturing technology, London, England, C1-1

Getting rid of the wires: Curved layer fused deposition modeling in conductive polymer additive manufacturing

O Diegel, S Singamneni, B Huang, I Gibson

(2011), Vol. 467 to 469, pp. 662-667, Key engineering materials, Stafa-Zurich, Switzerland, C1-1

Curved layer fused deposition modeling in conductive polymer additive manufacturing

O Diegel, S Singamneni, B Huang, I Gibson

(2011), Vol. 199 to 200, pp. 1984-1987, Advanced materials research, Stafa-Zurich, Switzerland, C1-1

Biomimetic composite coating on rapid prototyped scaffolds for bone tissue engineering

M Arafat, C Lam, A Ekaputra, S Wong, X Li, I Gibson

(2011), Vol. 7, pp. 809-820, Acta biomaterialia, Amsterdam, The Netherlands, C1-1

High performance additive manufactured scaffolds for bone tissue engineering application

M Arafat, C Lam, A Ekaputra, S Wong, C He, D Hutmacher, X Li, I Gibson

(2011), Vol. 7, pp. 8013-8022, Soft matter, Cambridge, England, C1-1

Flowers in the cracks: war, peace and Japan's education system

Ian Gibson

(2011), Vol. 8, pp. 101-126, JOURNAL OF PEACE EDUCATION, C1-1

Haptically integrated simulation of a finite element model of thoracolumbar spine combining offline biomechanical response analysis of intervertebral discs

K Huynh, Z Gao, I Gibson, W Lu

(2010), Vol. 42, pp. 1151-1166, Computer aided design, Amsterdam, The Netherlands, C1-1

Layer manufacturing of magnesium and its alloy structures for future applications

C Ng, M Savalani, H Man, I Gibson

(2010), Vol. 5, pp. 13-19, Virtual and physical prototyping, Abingdon, England, C1-1

RapidPRE : a new additive manufacturing technique based on reaction injection moulding

I Gibson, A Mateus, P Bartolo

(2010), Vol. 21, pp. 1589-1590, Annals of DAAAM 2010 & Proceedings, Vienna, Austria, C1-1

Curved-layer fused deposition modelling

S Singamneni, O Diegel, B Huang, I Gibson, R Chowdhury

(2010), Vol. 8, pp. 95-107, Journal for new generation sciences, Bloemfontein, South Africa, C1-1

Simulating dynamics of thoracolumbar spine derived from LifeMOD under haptic forces

K Huynh, I Gibson, W Lu, B Jagdish

(2010), Vol. 4, pp. 236-243, World academy of science, engineering and technology, Canakkale, Turkey, C1-1

The 'Global 30' Project and Japanese higher education reform: an example of a 'closing in' or an 'opening up'?

Chris Burgess, Ian Gibson, Jay Klaphake, Mark Selzer

(2010), Vol. 8, pp. 461-475, GLOBALISATION SOCIETIES AND EDUCATION, C1-1

Towards a medium/high load-bearing scaffold fabrication system

I Gibson, M Savalani, C Lam, R Olkowski, A Ekaputra, K Tan, D Hutmacher

(2009), Vol. 14, pp. 13-19, Tsinghua science and technology, Beijing, China, C1-1

Composites in rapid prototyping

I Gibson, Y Liu, M Savalani, L Anand

(2009), Vol. 7, pp. 35-47, Journal for new generation sciences, Bloemfontein, South Africa, C1-1

Mechanical and in vitro evaluations of composite PLDLLA/TCP scaffolds for bone engineering

C Lam, R Olkowski, W Świȩszkowski, K Tan, I Gibson, D Hutmacher

(2008), Vol. 3, pp. 193-197, Virtual and physical prototyping, Abingdon, England, C1-1

A finite element simulator for spine orthopaedics with haptic interface

G Zhan, I Gibson

(2008), Vol. 3, pp. 141-149, Virtual and physical prototyping, Abingdon, England, C1-1

Fusion behavior of TrueFormTM/SiO2 composite powders during selective laser sintering

K Fan, W Cheung, I Gibson

(2008), Vol. 14, pp. 87-94, Rapid prototyping journal, Bingley, England, C1-1

Reflectance and transmittance of TrueForm™ powder and its composites to CO₂ laser

K Fan, K Wong, W Cheung, I Gibson

(2007), Vol. 13, pp. 175-181, Rapid prototyping journal, Bingley, Eng., C1-1

A 6-DOF haptic interface and its applications in CAD

Z Gao, I Gibson

(2007), Vol. 30, pp. 163-170, International journal of computer applications in technology, Olney, Eng., C1-1

Rapid prototyping: from product development to medicine and beyond

I Gibson

(2006), Vol. 1, pp. 31-42, Virtual and physical prototyping, Abingdon, Eng., C1-1

Haptic sculpting of multi-resolution B-spline surfaces with shaped tools

Z Gao, I Gibson

(2006), Vol. 38, pp. 661-676, Computer-aided design, Amsterdam, The Netherlands, C1-1

The use of rapid prototyping to assist medical applications

I Gibson, L Cheung, S Chow, W Cheung, S Beh, M Savalani, S Lee

(2006), Vol. 12, pp. 53-58, Rapid prototyping journal, Bingley, Eng., C1-1

Rapid manufacture and GARPA

I Gibson, M Savalani

(2006), Vol. 12, pp. 1-2, Rapid prototyping journal, Bingley, Eng., C1-1

Experimental investigation of ink on powder used for selective laser sintering

L Ming, I Gibson

(2006), Vol. 174, pp. 91-101, Journal of materials processing technology, Amsterdam, The Netherlands, C1-1

Haptic B-spline surface sculpting with a shaped tool of implicit surface

Z Gao, I Gibson

(2005), Vol. 2, pp. 263-272, Computer-Aided Design and Applications, Abingdon, Eng., C1-1

Movement of powder bed material during the selective laser sintering of bisphenol-A polycarbonate

K Fan, W Cheung, I Gibson

(2005), Vol. 11, pp. 188-198, Rapid prototyping journal, Bingley, Eng., C1-1

A novel artificial prosthetic replacement for the proximal interphalangeal joint of the hand - from concept to prototype

S Chow, K Lam, I Gibson, A Ngan, W Lu, W Ip, K Chiu

(2005), Vol. 10, pp. 159-168, Hand surgery, Singapore, C1-1

Rapid prototyping: a tool for product development

I Gibson

(2005), Vol. 2, pp. 785-793, Computer-aided design and applications, Abingdon, Eng., C1-1

Constrained deformation of freeform surfaces using surface features for interactive design

J Zheng, K Chan, I Gibson

(2003), Vol. 22, pp. 54-67, International journal of advanced manufacturing technology, London, Eng., C1-1

Morphology and properties of selective laser sintered bisphenol a polycarbonate

H Ho, W Cheung, I Gibson

(2003), Vol. 42, pp. 1850-1862, Industrial and engineering chemistry research, Washington, D.C., C1-1

Effects of graphite powder on the laser sintering behaviour of polycarbonate

H Ho, W Cheung, I Gibson

(2002), Vol. 8, pp. 233-242, Rapid prototyping journal, Bingley, Eng., C1-1

Rapid prototyping for architectural models

I Gibson, T Kvan, L Ming

(2002), Vol. 8, pp. 91-99, Rapid prototyping journal, Bingley, Eng., C1-1

Desktop virtual reality interface for computer aided conceptual design using geometric techniques

J Zheng, K Chan, I Gibson

(2001), Vol. 12, pp. 309-329, Journal of engineering design, Abingdon, Eng., C1-1

Colour RP

I Gibson, L Ming

(2001), Vol. 7, pp. 212-216, Rapid prototyping journal, Bingley, Eng., C1-1

Improving surface quality of selective laser sintered rapid prototype parts using robotic finishing

D Shi, I Gibson

(2000), Vol. 214, pp. 197-203, Proceedings of the Institution of Mechanical Engineers, part B: journal of engineering manufacture, London, Eng., C1-1

Effects of energy density on morphology and properties of selective laser sintered polycarbonate

H Ho, I Gibson, W Cheung

(1999), Vol. 89-90, pp. 204-210, Journal of Materials Processing Technology, Amsterdam, The Netherlands, C1-1

A new approach for direct manipulation of free-form curve

J Zheng, K Chan, I Gibson

(1998), Vol. 17, pp. 327-334, Computer graphics forum, Amsterdam, The Netherlands, C1-1

Material properties and fabrication parameters in selective laser sintering process

I Gibson, D Shi

(1997), Vol. 3, pp. 129-136, Rapid prototyping journal, Bingley, Eng., C1-1

THE TEACHING OF ELECTRONIC ENGINEERING-RELATED SUBJECTS IN THE UKRAINE

A SACHENKO, I GIBSON

(1993), Vol. 30, pp. 28-32, INTERNATIONAL JOURNAL OF ELECTRICAL ENGINEERING EDUCATION, C1