Research Output for Dan Fabijanic
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
2013 Institute for Frontier Materials
Joseph, J. and Fabijanic, D.M. (2013) Characterization and tribological performance of Cu-based intermetallic layers, Key engineering materials, vol. 533, pp. 195-200, PUB NOT FOUND, Berlin, Germany [C1]
ERA journal ID: 8144 – Scopus EID: Not taggedDRO entry for this publication
Spencer, K.*, Fabijanic, D.M. and Zhang, M.X.* (2013) The influence of Al2O3 reinforcement on the properties of stainless steel cold spray coatings, Surface & coatings technology, vol. 206, no. 14, pp. 3275-3282, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 5020 – Scopus EID: Not taggedYang, D. K., Cizek, P., Fabijanic, D., Wang, J. T. and Hodgson, P. D. (2013) Work hardening in ultrafine-grained titanium : multilayering and grading, Acta materialia, vol. 61, no. 8, pp. 2840-2852, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84875433694Yang, D.K., Wang, J.T., Fabijanic, D., Cizek, P., Li, B.S., Lu, J.Z.* and Hodgson, P.D. (2013) Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening, Materials science and engineering A, vol. 560, pp. 339-342, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: Not tagged2012 Institute for Frontier Materials
Fabijanic, D. M. and Hilditch, T. B. (2012) Effect of carburising on geometrical control during quenching of martensitic sheet steel channels, Journal of materials processing technology, vol. 212, no. 8, pp. 1802-1809, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84860265464Kumar, Apurv, Hodgson, Peter, Fabijanic, Daniel and Gao, Weimin (2012) Numerical solution of gas–solid flow in fluidised bed at sub-atmospheric pressures, Advanced powder technology, vol. 23, no. 4, pp. 485-492, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3837 – Scopus EID: 2-s2.0-848647722042011 Institute for Frontier Materials
Gao, Wei-min, Fabijanic, Daniel, Hilditch, Tim and Kong, Ling-xue (2011) Integrated fluid-thermal-structural numerical analysis for the quenching of metallic components, Shanghai Jiaotong university (science), vol. 16, no. 2, pp. 137-140, Shanghai Jiaotong Daxue, Shanghai, China [C1]
ERA journal ID: Not matching ERA journal listJain, Sidharth*, Fabijanic, Daniel, Chandra, Kamlesh* and Agarwala, Vijaya* (2011) Microstructure and mechanical properties of nitrided and chromized short steel fiber reinforced aluminum based P/M composites, Materials science forum, vol. 690, pp. 335-338, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal listRalston, K. D.*, Fabijanic, D. and Birbilis, N.* (2011) Effect of grain size on corrosion of high purity aluminium, Electrochimica acta, vol. 56, no. 4, pp. 1729-1736, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1629 – Scopus EID: Not tagged
Citation counts:Thomson - 9
Ralston, K. D.*, Fabijanic, D., Jones, R. T.* and Birbilis, N.* (2011) Achieving a chromium rich surface upon steels via FBR-CVD chromising treatments, Corrosion ccience, vol. 53, no. 9, pp. 2835-2842, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4761 – Scopus EID: Not tagged
Citation counts:2010 Institute for Frontier Materials
Ralston, Kevin D.*, Fabijanic, Dan and Birbilis, Nick* (2010) Surface modification for enhanced corrosion resistance using fluid bed reactor chemical vapour deposition (FBR-CVD), Materials science forum, vol. 654-656, pp. 1956-1959, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal listFabijanic, D. M. and Hodgson, P. D. (2010) Surface alloying of metals using fluid bed reactor, International heat treatment and surface engineering, vol. 4, no. 3, pp. 103-104, Maney Publishing, London, England [C2]
ERA journal ID: Not matching ERA journal list2007 Centre for Material and Fibre Innovation
Hilditch, Tim, Toman, S. and Fabijanic, Dan (2007) Post-forming heat treatment of dual phase steel components for automotive applications using a fluid bed furnace, Materials forum, vol. 31, pp. 24-30, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal listFabijanic, Dan and Hodgson, Peter (2007) A new duplex surface modifcation process using fluid bed CVD, Thermal processing and surface engineering : key activities in the global knowledge economy ; the 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) congress ; 30th October to 1st November 2007, Brisbane, Australia ; proceed, p. 115, Materials Australia, Melbourne, Vic. [E3]
2006 Centre for Material and Fibre Innovation
Gao, Weimin, Kong, Lingxue*, Fabijanic, Dan and Hodgson, Peter (2006) Computational simulation of the influence of moving solid particles on species diffusion and chemical reactions, in Topping, B.H.V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Fifth International Conference on Engineering Computational Technology, pp. 467-468, Civil-Comp, Kippen [E1]
2005 School of Engineering
Fabijanic, Dan, Kelly, Georgina, Long, John and Hodgson, Peter (2005) A nitrocarburising and low-temperature chromising duplex surface treatment, Materials forum, vol. 29, pp. 77-82, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list2004 School of Engineering
Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2004) Development of a duplex surface treatment using fluidised bed technololgy, Materials Australia, vol. 37, no. 1, pp. 12-15, Institute of Metals and Materials Australasia Ltd, Parkville, Vic. [C3]
ERA journal ID: Not matching ERA journal list2002 School of Engineering
Fabijanic, Dan, Kelly, Georgina, Cardew-Hall, Michael* and Hodgson, Peter (2002) Galling reduction through die surface treatment - testing three treatments for sheet metal stamping, Stamping journal, vol. 14, no. 2, pp. 30-31, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal list2001 School of Engineering
Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2001) Combating adhesive wear in automotive stamping, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 237-242, IMEA, Melbourne, Vic [E1]
Fabijanic, D., Miller, C., Barnett, M., Cardew-Hall, M.*, Haynes, D.* and Hodgson, P. (2001) Investigation of tool finish direction and lubrication in the forming of cylindrical cups, in Duflou, J.R. (eds), SheMet 2001 : Proceedings of the 9th International Conference on Sheet Metal, pp. 101-108, Heverlee, Katholieke Universiteit Leuven, Departement Werktuigkunde, Leuven, Belgium [E2]
2000 School of Engineering
Fabijanic, D., Barnett, M., Hodgson, P. and Cardew-Hall, M.* (2000) Improving the Galling resistance of automotive stamping tools, in M. Pietrzyk, J. Kusiak and J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 641-646, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
Grants and Consultancies
All years
Research Income - Industry and Other Funding - Australian
Hodgson, P and Fabijanic, D. Novel Fluidised Bed Duplex Surface Treatments for Ferrous Materials [V.1]
- 2010: $-33,546
- 2009: $122,929
- 2008: $61,732
Fabijanic, D, Hodgson, P and Reuben, J*. The carburising resistance of nickel and iron aluminide surface layers [V.1]
- 2010: $6,600
Research Income - Other Funding Sources
Fabijanic, D, Hodgson, P and Cicak, I. Project 1.9a Novel Fluidised Bed Reactor Surface Modification Technology for Ferrous and Light Metals., CRC_AdManuf Grant - Cooperative Research Centre [X]
- 2011: $105,728
- 2010: $283,900
Higher Degree by Research Completions supervised by Dan Fabijanic
No completions found or audited.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Friday 24th May 2013 10:04pm
