Research Output for Lingxue Kong
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
2013 Institute for Frontier Materials
Li, Chengpeng, Feng, Chunfang, Peng, Zheng, Gong, Wei* and Kong, Lingxue (2013) Ammonium-assisted green fabrication of graphene/natural rubber latex composite, Polymer composites, vol. 34, no. 1, pp. 88-95, Wiley, New York, N.Y. [C1]
ERA journal ID: 1690 – Scopus EID: Not taggedDRO entry for this publication
2012 Institute for Frontier Materials
Bagherzadeh, R., Gorji, M.*, Latifi, M.*, Payvandy, P.* and Kong, L., X. (2012) Evolution of moisture management behavior of high-wicking 3D warp knitted spacer fabrics, Fibers and polymers, vol. 13, no. 4, pp. 529-534, Korean Fibre Society, Seoul, South Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-84860583086
Citation counts:Scopus - 1
Bagherzadeh, Roohollah*, Latifi, Masoud*, Najar, Saeed Shaikhzadeh*, Tehran, Mohammad Amani*, Gorji, Mohsen* and Kong, Lingxue (2012) Transport properties of multi-layer fabric based on electrospun nanofiber mats as a breathable barrier textile material, Textile research journal, vol. 82, no. 1, pp. 70-76, Sage Publications, London, England [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-83455163305
Citation counts:Thomson - 1
Li, Jihua*, Wei, Xiaoyi*, Wang, Qinghuang*, Chen, Jiacui*, Chang, Gang*, Kong, Lingxue, Su, Junbo* and Liu, Yuhuan* (2012) Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization, Carbohydrate polymers, vol. 90, no. 4, pp. 1609-1613, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1568 – Scopus EID: Not taggedLi, Xiaojun*, Shuang, Shengqing*, Li, Xinyong*, Kong, Lingxue, Xu, Ling*, Tai, Peidong*, Lin, Xin*, Jia, Chunyun* and Gong, Zongqiang* (2012) The effect of concentrations and properties of phenanthrene, pyrene, and benzo(a)pyrene on desorption in contaminated soil aged for 1 year, Journal of soils and sediments, vol. 13, no. 2, pp. 375-382, Springer, Berlin, Germany [C1]
ERA journal ID: 31051 – Scopus EID: Not taggedPeng, Zheng*, Feng, Chunfang, Luo, Yongyue*, Li, Yongzhen*, Yi, Zhifeng and Kong, L. X. (2012) Natural rubber/multiwalled carbon nanotube composites developed with a combined self-assembly and latex compounding technique, Journal of applied polymer science, vol. 125, no. 5, pp. 3920-3928, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-84857482088Wang, Qinghuang*, Luo, Yongyue*, Feng, Chunfang, Yi, Zhifeng, Qiu, Quanfang*, Kong, L.X. and Peng, Zheng* (2012) Reinforcement of natural rubber with core-shell structure silica-poly(Methyl Methacrylate) nanoparticles, Journal of nanomaterials, vol. 2012, pp. 1-9, Hindawi, Mumbai, India [C1]
ERA journal ID: Not matching ERA journal listWang, Shanxian*, Li, Xiaojun*, Liu, Wan*, Li, Peijun*, Kong, Lingxue, Ren, Wenjie*, Wu, Haiyan* and Tu, Ying* (2012) Degradation of pyrene by immobilized microorganisms in saline-alkaline soil, Journal of environmental sciences, vol. 24, no. 9, pp. 1662-1669, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 124506 – Scopus EID: Not taggedZhang, Juan, Xie, Zongli*, Hill, Anita J.*, She, Feng Hua, Thornton, Aaron W.*, Hoang, Manh* and Kong, Lingxue (2012) Structure retention in cross-linked poly(ethylene glycol) diacrylate hydrogel templated from a hexagonal lyotropic liquid crystal by controlling the surface tension, Soft matter, vol. 8, no. 7, pp. 2087-2094, Royal Society of Chemistry, Cambridge, England [C1]
ERA journal ID: 30185 – Scopus EID: Not taggedZhou, Min*, Li, Puwang*, Wang, Guang*, Yang, Ziming*, Peng, Zheng and Kong, Lingxue (2012) Preparation of nanoparticles by crosslinking folate conjugated chitosan with vanillin and its characterization, Applied mechanics and materials, vol. 466-467, pp. 454-457, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 124777 – Scopus EID: 2-s2.0-84858033906Sugumar, D., Kong, L.X., Ismail, Asma*, Ravichandran, M.* and Yin, Lee Su* (2012) Rapid multi sample DNA amplification using rotary-linear polymerase chain reaction device (PCRDisc), Biomicrofluidics, vol. 6, no. 1, pp. 1-13, American Institute of Physics, Melville, N.Y. [C2]
ERA journal ID: 122820 – Scopus EID: Not taggedHosain, Md. Kamal, Kouzani, Abbas Z., Tye, Susannah, Walder, Ken and Kong, Lingxue (2012) Design of a miniature UHF PIFA for DBS implants, in Unknown (ed.), CME 2012 : Proceedings of the 2012 IEEE/ICME International Conference on Complex Medical Engineering, pp. 485-489, IEEE Computer Society, Los Alamitos, Calif. [E1]
Sun, Xiangping, Wang, Jin, Chen, Ronghua, She, Mary F. H. and Kong, Lingxue (2012) Multi-scale local pattern co-occurrence matrix for textural image classification, in Unknown (ed.), IJCNN/WCCI 2012 : Proceedings of the 2012 International Joint Conference on Neural Networks, IEEE, Piscataway, N. J. [E1]
Wang, Jin, Chen, Ronghua, Sun, Xiangping, She, Mary and Kong, Lingxue (2012) Generative models for automatic recognition of human daily activities from a single triaxial accelerometer, in Unknown (ed.), IJCNN/WCCI 2012 : Proceedings of the 2012 International Joint Conference on Neural Networks, IEEE, Piscataway, N. J. [E1]
2012 External
Bagherzadeh, Roohollah*, Latifi, Masoud*, Najar, Saeed Shaikhzadeh*, Tehran, Mohammad Amani* and Kong, Lingxue* (2012) Three-dimensional pore structure analysis of Nano/Microfibrous scaffolds using confocal laser scanning microscopy, Journal of biomedical materials research : Part A, vol. 101A, no. 3, pp. 765-774, Wiley, New York, N.Y. [C1.1]
ERA journal ID: 5052 – Scopus EID: Not tagged2011 GTP Operations
Sun, Xiangping, Wang, Jin, Chen, Ronghua, Kong, Lingxue and She, Mary F. H. (2011) Directional Gaussian filter-based LBP descriptor for textural image classification, Procedia engineering, vol. 15, pp. 1771-1779, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 124648 – Scopus EID: 2-s2.0-84055189240Chen, Ronghua, She, Mary Fenghua, Wu, Yuchuan*, Sun, Xiangping and Kong, Lingxue (2011) Driver recognition based on dynamic handgrip pattern on steeling wheel, in Unknown (ed.), SNPD 2011 : Proceedings of the 12th ACIS International Conference on Software Engineering, Artificial Intelligence Networking and Parallel Distributed Computing, pp. 107-112, IEEE, Piscataway, N. J. [E1]
2011 Institute for Frontier Materials
Kouzani, Abbas Z., Tye, Sussanah, Walder, Ken and Kong, Lingxue (2011) A head mountable deep brain stimulation device for laboratory animals, in Wu, Yanwen (eds), Advances in computer, communication, control and automation, pp. 275-280, Springer-Verlag, Berlin, Germany [B1]
Feng, An, Lingxue, Kong, Lidan, Gong*, Zhenhui, Wang* and Weifu, Lin* (2011) Involvement of rootstocks and their hydraulic conductance in the drought resistance of grafted rubber trees, African journal of biotechnology, vol. 10, no. 51, pp. 10393-10404, Academic Journals, Lagos, Nigeria [C1]
ERA journal ID: 3387 – Scopus EID: Not taggedGao, W. M., Kong, L. X., She, F. H. and Hodgson, P. D. (2011) Particle dynamics and heat transfer at workpiece surface in heat treatment fluidised beds, Advanced materials research, vol. 264-265, pp. 1456-1461, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79961068094Gao, Wei-min, Fabijanic, Daniel, Hilditch, Tim and Kong, Ling-xue (2011) Integrated fluid-thermal-structural numerical analysis for the quenching of metallic components, Shanghai Jiaotong university (science), vol. 16, no. 2, pp. 137-140, Shanghai Jiaotong Daxue, Shanghai, China [C1]
ERA journal ID: Not matching ERA journal listGao, W. M., Kong, L. X. and Hodgson, P. D. (2011) Integral approach and numerical improvement to calculate carbon concentration profiles in carburising, Advanced materials research, vol. 264-265, pp. 1494-1499, Trans Tech Publications, Lausanne, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: Not taggedLi, Puwang, Peng, Zheng*, She, F. H. and Kong, L. X. (2011) Development of ligand incorporated chitosan nanoparticles for the selective delivery of 5-fluorouracil to colon, Advanced materials research, vol. 197-198, pp. 238-241, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79952669620Li, Puwang, Wang, Yichao, Zeng, Fanbo*, Chen, Lijue*, Peng, Zheng* and Kong, Ling Xue (2011) Synthesis and characterization of folate conjugated chitosan and cellular uptake of its nanoparticles in HT-29 cells, Carbohydrate Research, vol. 346, no. 6, pp. 801-806, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 1569 – Scopus EID: Not tagged
Citation counts:Li, Puwang, Wang, Yichao, Peng, Zheng*, She, Fenghua and Kong, Lingxue (2011) Development of chitosan nanoparticles as drug delivery systems for 5-fluorouracil and leucovorin blends, Carbohydrate polymers, vol. 85, no. 3, pp. 698-704, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 1568 – Scopus EID: Not tagged
Citation counts:Peng, Zheng*, Feng, Chunfang, Luo, Yongyue*, Yi, Zhifeng and Kong, Lingxue (2011) Structure and properties of self-assembled narural rubber/multi-walled carbon nanotube composites, Wuhan university of technology. journal (material science edition), vol. 26, no. 5, pp. 807-811, Wuhan Ligong Daxue, Hubei, China [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Wang, Guang*, Li, Puwang*, Peng, Zheng*, Huang, Maofang* and Kong, Lingxue (2011) Formulation of vanillin cross-linked chitosan nanoparticles and its characterization., Advanced materials research, vol. 335-336, pp. 474-477, Trans Tech Publications, Lausanne, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: Not taggedZeng, Zongqiang*, Peng, Zheng*, Kong, Lingxue and Liu, Hongchao* (2011) Structure and thermal stability of natural rubber reinforced with in situ generated zinc sorbate, Advanced materials research, vol. 239-242, pp. 903-907, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79957829510Zhang, Juan, Xie, Zongli*, She, Feng Hua, Hoang, Manh*, Hill, Anita J.*, Gao, Weimin and Kong, Lingxue (2011) Nanostructures generated from photopolymerization of poly(ethylene glycol) diacrylate templated from hexagonal lyotropic liquid crystals, Journal of applied polymer science, vol. 120, no. 3, pp. 1817-1821, John Wiley & Sons, Inc, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: Not tagged
Citation counts:Chen, Ronghua, She, Mary, Wang, Jin, Sun, Xiangping and Kong, Lingxue (2011) Driver verification based on handgrip recognition on steering wheel, in Unknown (ed.), SMC 2011 : Conference proceeding of the 2011 International Conference on Systems, Man, and Cybernetics, pp. 1645-1651, IEEE, Piscataway, N. J. [E1]
Dong, Xiaowei, He, Dongning*, Kong, Lingxue and Gao, Weimin (2011) Effect of dynamic behaviour on the electrochemical reaction of direct carbon fuel cell, in Unknown (ed.), APCSEET 2011 : Proceeding of the 8th Asia Pacific Conference on Sustainable Energy & Environmental Technologies, p. 143, APCSEET, Adelaide, S. Aust. [E3.1]
Gao, Weimin, Wang, Jinli*, She, Mary, Li, Puwang, Jiao, Jing*, Zhang, Jin and Kong, Lingxue (2011) Understanding of cellulose degradation of plant cell walls by ab initio molecular dynamics, in Unknown (ed.), APCSEET 2011 : Proceeding of the 8th Asia Pacific Conference on Sustainable Energy & Environmental Technologies, p. 187, APCSEET, Adelaide, S. Aust. [E3.1]
He, Dongning*, Dong, Xiaowei*, Kong, Lingxue and Gao, Weimin (2011) Enhancement of electro-oxidation of carbon fuels for direct carbon-electricity conversion, in Unknown (ed.), APCSEET 2011 : Proceeding of the 8th Asia Pacific Conference on Sustainable Energy & Environmental Technologies, p. 136, APCSEET, Adelaide, S. Aust. [E3.1]
2011 External
Heping, Y.*, Zongqiang, Z.*, Qifang, W.*, Yongyue, L.*, Xia, Z.*, Linxue, K.* and Zhanjiang* (2011) Preparation of constant viscosity natural rubber with mercaptan, KGK online, vol. May, pp. 31-34, Huethig GmbH & Co. KG, Berlin , Germany [C1.1]
ERA journal ID: Not matching ERA journal list2010 Institute for Frontier Materials
Sugumar, D., Ismail, Asma*, Ravichandran, Manickam*, Aziah, Ismail* and Kong, L. X. (2010) Amplification of SPPS150 and salmonella typhi DNA with a high throughput oscillating flow polymerase chain reaction device, Biomicrofluidics, vol. 4, no. 2, pp. 1-12, American Institute of Physics, Melville, NY [C1]
ERA journal ID: 122820 – Scopus EID: 2-s2.0-77954527695
Citation counts:Li, Chengpeng, Zhong, Jie-ping*, Yang, Lei*, Li, Si-dong*, Kong, Lingxue and Hou, Ting-ting* (2010) Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride, E-polymers, vol. 072, pp. 1-9, European Polymer Federation, Strasbourg, France [C1]
ERA journal ID: 3955 – Scopus EID: 2-s2.0-77957010064Li, Puwang, Wang, Yichao, Peng, Zheng* and Kong, Lingxue (2010) Simultaneous incorporation of 5-fluorouracil and leucovorin into chitosan nanoparticle as drug carrier and its characterization, Materials science forum, vol. 654-656, pp. 2265-2268, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal listPeng, Zheng*, Feng, Chunfang*, Luo, Yongyue*, Li, Yongzhen* and Kong, Lingxue (2010) Self-assembled natural rubber/multi-walled carbon nanotube composites using latex compounding techniques, Carbon, vol. 48, no. 15, pp. 4497-4503, Elsevier, New York, N.Y. [C1]
ERA journal ID: 1412 – Scopus EID: 2-s2.0-77957110773
Citation counts:She, F. H., Nihara, K.*, Gao, W. M., Hodgson, P. D., Jinnai, H.* and Kong, L. X. (2010) 3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis, Desalination, vol. 250, no. 2, pp. 757-761, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 3874 – Scopus EID: 2-s2.0-71849091900
Citation counts:Wang, Yichao, Li, Puwang, Kong, Lingxue, Peng, Zheng* and Luo, Yongyue* (2010) Formulation optimization for high drug loading colonic drug delivery carrier, in Yu, Weichuan; Zhang, Ming; Wang, Lipo and Song, Yibin (eds), BMEI 2010 : Proceedings of the 3rd International Conference on Biomedical Engineering and Informatics, pp. 1686-1689, IEEE, Piscataway, N.J. [E1]
2009 Institute for Frontier Materials
Gao, Weimin, Kong, Lingxue, Long, John M. and Hodgson, Peter D. (2009) Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces, Journal of materials processing technology, vol. 209, no. 1, pp. 497-505, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-53949095824
Citation counts:Ji, H.*, Hsu, H - Y*, Kong, L. X. and Wedding, A. B.* (2009) Development of a contact probe incorporating a bragg grating strain sensor for nano coordinate measuring machines, Measurement science and technology, vol. 20, no. 9, pp. 1-7, Institute of Physics Publishing Ltd., Bristol, England [C1]
ERA journal ID: 35105 – Scopus EID: 2-s2.0-70350651932
Citation counts:She, Fenghua, Gao, D.*, Gao, Weimin, Wu, D. Y.*, Peng, Zheng, Hoang, M.* and Kong, Lingxue (2009) Characterization of membranes with X-ray ultramicroscopy, Desalination, vol. 236, no. 1-3, pp. 179-186, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3874 – Scopus EID: 2-s2.0-57949093708
Citation counts:Zhong, Jie Ping*, Li, Cheng Peng*, Li, Si-Dong*, Kong, Ling-xue, Yang, Lei*, Liao, Shuang-Quan* and She, Xiao-Dong* (2009) Study on the properties of natural rubber during maturation, Journal of polymer materials, vol. 26, no. 3, pp. 351-360, M D Publications, New Delhi, India [C1]
ERA journal ID: 4940 – Scopus EID: 2-s2.0-77952337134
Citation counts:She, Fenghua, Chen, Ronghua, Gao, Weimin, Hodgson, Peter, Kong, Lingxue and Hong, H. Y.* (2009) Improved 3D thinning algorithms for skeleton extraction, in Unknown (ed.), DICTA 2009 : Digital Image Computing : Techniques and Application, pp. 14-18, DICTA2009 Committee, Melbourne, Vic. [E1]
Zhang, Juan, She, Fenghua, Gao, Weimin and Kong, Lingxue (2009) Preparation of cross-linked nanoporous poly(ethylene glycol) diacrylate membrane in hexagonal lyotropic liquid crystal phases, in Unknown (ed.), IWA 2009 : Specialised Membrane Technology Conferences for Water and Wastewater Treatment, p. ID233, Tsinghua University, Beijing, China [E1]
Gao, Weimin, Kong, Lingxue, She, Fenghua and Hodgson, Peter (2009) Particle dynamics and heat transfer at workpiece surface in heat treatment fluidised beds, AMPT 2009 : Forging a better future, pp. 1-11 [E2]
Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2009) Integral approach and numerical improvement to calculate the carbon concentration profiles in carburising process, AMPT 2009 : Forging a better future, pp. 1 (ID332)-14, AMPT Committees, Kuala Lumpur, Malaysia [E2]
Gao, Weimin, She, Fenghua, Kong, Lingxue and Hodgson, Peter (2009) The influence of geometry and wall character of pores on the permeation of ions and water through desalination membranes, 5th IWA Specialised Membrane Technology Conferences for Water and Wastewater Treatment, p. ID139, Tsinghua University, Beijing, China [E2]
Lin, H.*, Lin, H.-Y.* and Kong, L. X. (2009) FEA simulation of contact and wear between non-metallic materials for accelerated new product development, AMPT 2009 : Forging a better future, pp. 1 (ID188)-9, AMPT Committees, Kuala Lumpur, Malaysia [E2]
She, Fenghua, Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2009) Dynamic characteristics and efficiency of a fluidized bed heat treatment process, AMPT 2009 : Forging a better future, pp. 1 (ID185)-9, AMPT Committees, Kuala Lumpur, Malaysia [E2]
She, Fenghua Mary, Hong, Hanyu*, Chen, Ronghua*, Gao, Weimin, Hodgson, Peter D. and Kong, Lingxue (2009) Geometrical and topological analysis of membrane's 3D pore structure, Proceedings of the 5th Aseanian Membrane Society Conference; 2009, Aseanian Membrane Societ, Kobe, Japan [EN]
2008 Centre for Material and Fibre Innovation
Lin, Hungyen*, Kong, Lingxue and Hsu, Hung-Yao* (2008) Data mining for degradation modelling, VDM Verlag Dr. Muller, Saarbrucken, Germany [A1.1]
Kong, Lingxue, Chen, Ying*, Peng, Zhen and Li, Puwang (2008) Latex-based nanocomposites, in Thomas, Sabu and Zaikov, Gennady E. (eds), Progress in polymer nanocomposite research, pp. 83-104, Nova Science Publishers, Hauppauge, N.Y. [B1]
Chen, Ying*, Peng, Zheng, Kong, Lingxue, Huang, Maofang* and Li, Puwang (2008) Natural rubber nanocomposite reinforced with nano silica, Polymer engineering and science, vol. 48, no. 9, pp. 1674-1677, John Wiley & Sons, Stamford, Conn. [C1]
ERA journal ID: 1692 – Scopus EID: 2-s2.0-51349130980
Citation counts:Kong, L.X., She, F.H., Gao, W.M., Nahavandi, S. and Hodgson, P.D. (2008) Integrated optimization system for high pressure die casting processes, Journal of materials processing technology, vol. 201, no. 1-3, pp. 629-634, Elsevier SA, Zürich, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-41549168250
Citation counts:She, F.H., Gao, W. M, Peng, Z.*, Hodgson, P. D and Kong, L. X (2008) Micro- and nano-characterization of membrane materials, Journal of the Chinese Institute of Chemical Engineers, vol. 39, no. 4, pp. 313-320, Chinese Institute of Chemical Engineers, Taiwan, Republic of China [C1]
ERA journal ID: 3908 – Scopus EID: 2-s2.0-48849088544
Citation counts:Dharmalingam, Sugumar* and Kong, Lingxue (2008) Lab-on-chip devices for biodefense applications, in Li, Dongqing (eds), Encyclopedia of microfluidics and nanofluidics, pp. 907-910, Springer, New York, N. Y. [D2]
Dharmalingam, Sugumar* and Kong, Lingxue (2008) Chemical vapor deposition for film deposition, in Li, Dongqing (eds), Encyclopedia of microfluidics and nanofluidics, pp. 255-260, Springer, New York, N. Y. [D2]
Li, P. W., Lu, M. Z.*, Huang, M. F.*, Peng, Z.* and Kong, L. X. (2008) Thermal degradation of natural rubber/ZNO nanocomposites, in Wang, C. Y.; Li, X. P. and Wang, J. (eds), APCMP 2008 : Proceedings of the 8th Asia-Pacific conference on materials processing, pp. 996-1001, Frontiers of Design and Manufacturing, Riverwood, N.S.W. [E1]
Kong, L. X. and Hodgson, P. D. (2008) Collaborative research training : a global challenge, in Unknown (ed.), ICPE-3 2008 : Proceedings of the 3rd International Conference On Postgraduate Education 2008, ICPE, Penang, Malaysia [E1.1]
She, Fenghua, Nihara, K.*, Gao, Weimin, Hodgson, Peter, Jinnai, H.* and Kong, Lingxue (2008) 3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis, Papers presented at the conference on membranes in drinking water production and wastewater treatment, 20-22 October, Toulouse, France, pp. 1-8, MDIW, France [E2]
2008 External
She, F. H.*, Tung, K. L.* and Kong, L. X.* (2008) Calculation of effective pore diameters in porous filtration membranes with image analysis, Robotics and computer-integrated manufacturing, vol. 24, no. 3, pp. 427-434, Elsevier, London, England [C1.1]
ERA journal ID: 41932 – Scopus EID: 2-s2.0-39749122750
Citation counts:2007 Centre for Material and Fibre Innovation
Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Finite element simulation of deformation processes of micro-components, Journal of mechanical science and technology, vol. 21, pp. 1456-1463, Springer, Germany [C1]
ERA journal ID: 3782 – Scopus EID: 2-s2.0-35348995076Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Alternating heat transfer between objects of large geometrical difference, Advances in engineering software, vol. 38, no. 11-12, pp. 818-825, Elsevier Applied Science, Barking, Essex, England [C1]
ERA journal ID: 22083 – Scopus EID: 2-s2.0-34447639059Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Computational simulation of gas flow and heat transfer near an immersed object in fluidized beds, Advances in engineering software, vol. 38, no. 11-12, pp. 826-834, Elsevier Applied Science, Barking, Essex, England [C1]
ERA journal ID: 22083 – Scopus EID: 2-s2.0-34447636752
Citation counts:Xia, We*, Hsu, H* and Kong, L. (2007) A cFD-aided experimental study on bending of micro glass pipettes, Journal of mechanical science and technology, vol. 21, pp. 1338-1345, Korean Society of Mechnical Engineers, Seoul, Korea [C1]
ERA journal ID: 3782 – Scopus EID: 2-s2.0-35349008687Xia, Wei, Hsu, Hung-Yao, Kong, Lingxue, Evans, Allan* and Lee, Ryan* (2007) A potential application of a piezoelectric atomiser for ophthalmic drug delivery, Applied bionics and biomechanics, vol. 4, no. 1, pp. 9-17, Taylor & Francis, Abingdon, England [C1.1]
ERA journal ID: 44643 – Scopus EID: 2-s2.0-49549100686Kong, Lingxue, She, F. H., Gao, Weimin, Nahavandi, Saeid and Hodgson, Peter (2007) Integrated optimization system for high pressure die casting processes, in Unknown (ed.), AMPT 2007 : 10th International Conference on Advances in Materials and Processing Technologies, Daejeon, Korea, 07-11 October 2007, pp. 629-634, Elsevier, Amsterdam, The Netherlands [E1.1]
Citation counts:She, F. H., Gao, D,*, Gao, W. M., Wu, D. Y.*, Peng, Z., Hoang, M.* and Kong, L. X. (2007) Characterization of membranes with X-ray ultramicroscopy, in Unknown (ed.), IMSTEC 2007 : Proceedings of the 6th International Membrane Science and Technology Conference 2007, UNESCO Centre for Membrane Science and Technology, Kensington, N. S. W. [E1.1]
2007 External
Kong, L. X.*, Hunter, S. L.* and Lin, G. C. I.* (2007) An advanced virtual engineering educational program for engineering research and teaching excellence., The International journal of mechanical engineering education, vol. 35, no. 2, pp. 148-165, Manchester University Press, Manchester, England [C1.1]
ERA journal ID: 44879 – Scopus EID: 2-s2.0-35748969583Lin, Hungyen*, Kong, L. X.* and Hsu, Hung-Yao* (2007) Design and degradation modelling through artificial neural networks, International journal of manufacturing research, vol. 2, no. 1, pp. 97-113, Inderscience, Olney, England [C1.1]
ERA journal ID: 3634 – Scopus EID: Not taggedPeng, Zheng* and Kong, Ling Xue* (2007) A thermal degradation mechanism of polyvinyl alcohol/silica nanocomposites., Polymer degradation and stability, vol. 92, no. 6, pp. 1061-1071, Elsevier Ltd, Oxford, England [C1.1]
ERA journal ID: 1691 – Scopus EID: 2-s2.0-34248378310
Citation counts:Peng, Zheng* and Kong, Ling Xue* (2007) Morphology of self-assembled polyvinyl alcohol/silica nanocomposites studied with atomic force microscopy, Polymer bulletin, vol. 59, no. 2, pp. 207-216, Springer, Heidelberg, Germany [C1.1]
ERA journal ID: 1689 – Scopus EID: 2-s2.0-34547338237
Citation counts:Peng, Zhen*, Kong, Ling Xue*, Li, Si-Dong*, Chen, Yin* and Huang, Mao Fang* (2007) Self-assembled natural rubber/silica nanocomposites : its preparation and characterization, Composites science and technology, vol. 67, no. 15-16, pp. 3130-3139, Pergamon, Oxford, England [C1.1]
ERA journal ID: 4884 – Scopus EID: 2-s2.0-35248852830
Citation counts:Dharmalingam, S*, Kong, L. X.* and Asma, I.* (2007) Design and fabrication of a chip based DNA system, in Unknown (ed.), ICMAT 2007 : Proceedings of the 2007 International Conference on Materials for Advanced Technologies, ICMAT, Singapore [E1.1]
Dharmalingam, S*, Kong, L. X.* and Ashraf, M. A.* (2007) PID-PWM BASED thermal control system for PCR device, in Unknown (ed.), ICMAT 2007 : Proceedings of the 2007 International Conference on Materials for Advanced Technologies, ICMAT, Singapore [E1.1]
She, F. H.*, Kong, L. X.*, Gao, W. M.* and Peng, Z.* (2007) The development of novel image algorithms for micro and nano characterisation of membranes with X-ray ultramicroscopy, in Lai, Juin-Yih; Tung, Kuo-Lun; Lee, Duu-Jong and Wang, Da-Ming (eds), AMS 2007 : Proceedings of the 4th Aseanian Membrane Society conference 2007, AMS, Taipei, Taiwan [E1.1]
Shi, Y. R.*, Yu, Z. X.*, Kong, L. X.* and Hsu, H. Y.* (2007) The locomotion systems for self-propelled endscopes : a review and a new proposal, in Gardner, Julian W. (eds), IASTED 2007 : Proceedings of the Fifth IASTED International Conference on Biomedical Engineering : February 14 - 16, 2007, Innsbruck, Austria, Acta Press, Anaheim, Calif. [E1.1]
2006 Centre for Material and Fibre Innovation
Kong, Lingxue, Peng, Zheng*, Li, Si-Dong* and Bartold, P. Mark* (2006) Nanotechnology and its role in the management of periodontal diseases, Periodontology 2000, vol. 40, pp. 184-196, Blackwell Munksgaard, Copenhagen, Denmark [C1.1]
ERA journal ID: 32680 – Scopus EID: 2-s2.0-33644864338
Citation counts:Dharmalingam, Sugumar*, Shi, Yanru*, Yu, Zhenxian*, Kong, Lingxue and She, Feng Hua* (2006) Computational investigation of a non-Newtonian fluid flow in a microchannel using surface micro waves, in Kandlikar, S. (eds), ICNMM 2006 : Proceedings of 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM, Limerick, Ireland [E1.1]
2006 External
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2006) Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed, Applied thermal engineering, vol. 26, no. 14-15, pp. 1463-1470, Pergamon, Oxford, United Kingdom [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-33646349454
Citation counts:Gao, Weimin, Hodgson, Peter D. and Kong, Lingxue* (2006) Numerical analysis of heat transfer and the optimisation of regenerators, Numerical heat transfer, part A, vol. 50, no. 1, pp. 63-78, Taylor & Francis, Philadelphia, Pa. [C1.1]
ERA journal ID: 3804 – Scopus EID: 2-s2.0-33744902861
Citation counts:Kong, L. X.*, Peng, Z.* and Dharmalingam, S* (2006) Management of cardiovascular diseases with micro systems and nanotechnology, Journal of nanoscience and nanotechnology, vol. 6, no. 9-10, pp. 2754-2761, American Scientific, Valencia, Calif. [C1.1]
ERA journal ID: 4936 – Scopus EID: 2-s2.0-33750088681
Citation counts:Li, Si-Dong*, Peng, Zheng*, Kong, Lin Xue* and Zhong, Jie-Ping* (2006) Thermal degradation kinetics and morphology of natural rubber/silica nanocomposites, Journal of nanoscience and nanotechnology, vol. 6, no. 2, pp. 541-546, American Scientific, Valencia, Calif. [C1.1]
ERA journal ID: 4936 – Scopus EID: 2-s2.0-33745768894
Citation counts:Peng, Zheng*, Kong, Ling Xue*, Li, Si-Dong* and Spiridonov, Pavel* (2006) Poly (vinyl alcohol) / silica nanocomposites: morphology and thermal degradation kinetics, Journal of nanoscience and nanotechnology, vol. 6, no. 12, pp. 3934-3938, American Scientific, Valencia, Calif. [C1.1]
ERA journal ID: 4936 – Scopus EID: 2-s2.0-33845803774
Citation counts:Gao, Weimin, Kong, Lingxue*, Fabijanic, Dan and Hodgson, Peter (2006) Computational simulation of the influence of moving solid particles on species diffusion and chemical reactions, in Topping, B.H.V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Fifth International Conference on Engineering Computational Technology, pp. 467-468, Civil-Comp, Kippen [E1]
Sugumar, D.*, Ashraf, M. A.* and Kong, L. X.* (2006) Computational thermal analysis of a continuous flow micro Polymerase Chain Reaction (PCR) chip, in Chiao, Jung-Chih; Dzurak, Andrew S.; Jagadish, Chennupati and Thiel, David V. (eds), SPIE 2006 : Proceedings : Micro and Nanotechnology : Materials, Processes, Packaging, and Systems III, SPIE, International Society for Optical Engineering, Bellingham, Wash. [E1.1]
Ji, H.*, Wedding, A. B.*, Kong, L. X.*, Hsu, H. Y.*, Lin, G. C. I.* and Fan, K. C.* (2006) Calibration of wavelength shift for a fibre Bragg grating using a single mode laser source, in Unknown (ed.), SPIE 2006 : Smart Structures, Devices, and Systems III : Proceedings of the 2006 International Society for Optical Engineering, SPIE, Bellingham, Wash. [E1.1]
Ji, Hong*, Kong, Ling Xue*, Hsu, Hung-Yao*, Wedding, A. Bruce*, Lin, Grier C. I.* and Fan, Kuang-Chao* (2006) A high sensitivity optical touch trigger probe for down scaled 3D CMMs, in Fan, Kuang-Chao (eds), ISPMM 2006 : Proceedings of the 3rd International Symposium on Precision Mechanical Measurements : 2-6 August 2006, Urumqi, Xinjiang, China, SPIE, Bellingham, Wash. [E1.1]
Kong, L. X.*, Peng, Z.*, Geng, L.* and Sugumar, D.* (2006) The particle aggregation and agglomeration in natural rubber/silica nanocomposites, in Unknown (ed.), ISNRM 2006 : Proceedings of the 2006 International Symposium on Natural Rubber Materials, ISNRM, Zhanjiang, China [E1.1]
Kong, L. X.*, Mandloi, S.*, She, F. H.* and Ngo, H.* (2006) Detection and measurement of micro leakage in dental filling using micotomy technology, in Unknown (ed.), IMLF 2006 : Proceedings of the 2006 International Manufacturing Leaders Forum, IMLF, Taipei, Taiwan [E1.1]
Lin, H.*, Lin, H. Y.* and Kong, L. X.* (2006) Finite element analysis of a polymer to polymer wearing process, in Topping, B.H.V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Fifth International Conference on Engineering Computational Technology, pp. 219-220, Civil-Comp, Las Palmas de Gran Canaria, Spain [E1.1]
Lin, H. Y.*, Lin, H.*, Kong, L. X.* and Hsu, H. Y.* (2006) Design and degradation modelling through artificial neural networks, in Unknown (ed.), WCEAM 2006 : Engineering asset management : proceedings of the first World Congress on Engineering Asset Management, Gold Coast, Queensland, Australia, Springer, London, England [E1.1]
She, F. H.*, Sugumar, D.* and Kong, L. X.* (2006) Recent developments and trends in smart textiles for wearable systems, in Unknown (ed.), IMLF 2006 : Proceedings of the 2006 International Manufacturing Leaders Forum, IMLF, Taipei, Taiwan [E1.1]
Shi, Y.*, Dharmalingam, S.*, Yu, Z.*, Kong, L. X.* and Hsu, H. Y.* (2006) Preliminary numerical modelling non-newtonian fluid behaviour under surface microwaves, in Kandlikar, S. (eds), ICNMM 2006 : Proceedings of 4th International Conference on Nanochannels, Microchannels and Minichannels, American Society of Mechanical Engineers, New York, N.Y. [E1.1]
Xia, Wei*, Hsu, Hung-Yao* and Kong, Lingxue* (2006) Development of positioning jig for glass capillary bending mechanism, in Ang, W (eds), RAM 2006 : Proceedings of the 2nd IEEE International Conference on Robotics, Automation and Mechatronics 2006, pp. 1-5, IEEE, Piscataway, N. J. [E1.1]
Yu, Z.*, Shi, Y.*, Hsu, H. Y.* and Kong, L. X.* (2006) Investigation of a self-directing liquid holder with computational fluid dynamics, in Topping, B. H. V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Fifth International Conference on Engineering Computational Technology, pp. 411-412, Civil-Comp, Las Palmas de Gran Canaria, Spain [E1.1]
2005 Centre for Material and Fibre Innovation
Peng, Zheng*, Kong, Lingxue and Li, Si Dong* (2005) Dymanic mechanical analysis of polyvinylalcohol/silica nanocomposite, Synthetic metals, vol. 152, no. 1-3, pp. 25-28, Elsevier, Amsterdam, The Netherlands [C1.1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-24644479796
Citation counts:Peng, Zheng*, Kong, Lingxue and Li, Si Dong* (2005) Non-isothermal crystallisation kinetics of self-assembled polyvinylalcohol/silica nano-composite, Polymer, vol. 46, no. 6, pp. 1949-1955, Elsevier, Amsterdam, The Netherlands [C1.1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-13844255769
Citation counts:2005 External
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2005) Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds, International journal of materials & product technology, vol. 24, no. 1-4, pp. 319-338, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-27844589510
Citation counts:Kong, L. X.*, Wang, B.* and She, F. H.* (2005) Secondary flow in a strong curved converging channel, Research journal of textile and apparel, vol. 9, no. 3, pp. 58-63, Hong Kong Polytechnic University, Hong Kong Institution of Textile and Apparel, Hung Hom, Hong Kong [C1.1]
ERA journal ID: 3546 – Scopus EID: Not taggedKong, L. X.* and Peng, Z.* (2005) Investigation of nonisothermal crystallization behaviors of poly and silica nanocomposites using differential scanning calorimetry, Key engineering materials, vol. 295-296, pp. 39-44, Trans Tech, Stafa-Zurich, Switzerland [C1.1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-33750291622
Citation counts:Lung, Dragon K. P.*, Kong, Ling Xue* and Hsu, Hung-Yao* (2005) Development of a photolithography distribution scheme in semiconductor wafer fabrication, International journal of agile manufacturing, vol. 8, no. 1, pp. 115-122, International Society of Agile Manufacturing, Lafayette, La. [C1.1]
ERA journal ID: 44881 – Scopus EID: 2-s2.0-23844535790Peng, Zheng*, Kong, Ling Xue* and Li, Si-Dong* (2005) Isothermal crystallisation behaviour and kinetics of polyvinylalcohol/silica nanocomposite, Synthetic metals, vol. 152, no. 1-3, pp. 321-324, Elsevier S.A., Lausanne, Switzerland [C1.1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-24644503252
Citation counts:Peng, Zheng*, Kong, Ling X.* and Li, Si-Dong* (2005) Thermal properties and morphology of a poly(vinyl alcohol)/silica nanocomposite prepared with a self-assembled monolayer technique, Journal of applied polymer science, vol. 96, no. 4, pp. 1436-1442, John Wiley & Sons, Hoboken, N.J. [C1.1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-17644403514
Citation counts:Peng, Zheng* and Kong, Ling Xue* (2005) Development of a novel micro-spray-assembly process for multilayer ultra-thin film formation, Journal of metastable and nanocrystalline materials, vol. 23, pp. 331-334, Trans Tech, Stafa-Zurich, Switzerland [C1.1]
ERA journal ID: Not matching ERA journal listPeng, Zheng*, Kong, Ling Xue* and Li, Si-Dong* (2005) Study on thermooxidative degradation of poly(vinyl alcohol)/silica nanocomposite prepared with SAM technique, Journal of metastable and nanocrystalline materials, vol. 23, pp. 375-378, Trans Tech, Stafa-Zurich, Switzerland [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts:She, F. H.*, Xia, F.*, Zhang, W. S.* and Kong, L. X.* (2005) Objective measurement of wool fibre diameter based on staple textural features, Research journal of textile and apparel, vol. 9, no. 3, pp. 29-33, Hong Kong Polytechnic University, Hong Kong Institution of Textile and Apparel, Hung Hom, Hong Kong [C1.1]
ERA journal ID: 3546 – Scopus EID: Not taggedJi, H.*, Kong, L. X.*, Hsu, H. Y.*, Wedding, A. B.*, Lin, G. C. I.* and Fan, K. C.* (2005) Concept design of a novel tactile probe tip for down scaled 3D CMMs, in Chiao, J. C.; Dzurak, A.; Jagadish, C. and Thiel, D. (eds), SPIE 2005 : Proceedings of the 2005 Society of Photo-optical Instrumentation Engineers, International symposium on Microelectronics, MEMS and Nanotechnology, SPIE, Brisbane, Qld. [E1.1]
Ji, H.*, Hsu, H. Y.*, Chua, J.*, Kong, L. X.*, Wedding, A. B.*, She, M.*, Lin, G. C. I.* and Fan, K. C.* (2005) Fabrication of integrated optic fibre tip for micron CMMs touch trigger probe application, in Hariz, A. (eds), SPIE 2005 : Proceedings of the 2005 Society of Photo-optical Instrumentation Engineers, International symposium on Microelectronics, MEMS and Nanotechnology, SPIE, Brisbane, Qld. [E1.1]
Lin, H.Y.*, Kong, L.X.* and Hsu, H.Y.* (2005) Modelling design and degradation using artificial neural network., in Ismail, W (eds), CISAR 2005 & ATCI 2005 : Conference on Intelligent Systems and Robotics and International Advanced Technology Congress : Meeting Challenges in Globablisation Through Advanced Technology, University of Putra Malaysia, Putrajaya, Malaysia [E1.1]
She, F.H.*, Xia, F.*, Zhang, W.S.* and Kong, L.X.* (2005) Objective assessment of wool staples' fineness based on their textural features., in Unknown (ed.), IMLF 2005 : Global Competitive Manufacturing : Proceedings of the 2005 International Manufacturing Leaders Forum, IMLF, Adelaide, S. Aust. [E1.1]
She, F.H.*, Kong L.X.*, Kouzani, A.*, Zhang, W.S.* and Xia, F.* (2005) Fibre diameter measurement of wool staples by utilising morphological operations and euclidean distance transform., in Ismail, W (eds), CISAR 2005 & ATCI 2005 : Conference on Intelligent Systems and Robotics and International Advanced Technology Congress : Meeting Challenges in Globablisation Through Advanced Technology, University of Putra Malaysia, Putrajaya, Malaysia [E1.1]
She, F.H.*, Tung, K.L.* and Kong, L.X.* (2005) Computing effective pore sizes and distributions of porous membrane with euclidean distance transform., in Unknown (ed.), IMLF 2005 : Global Competitive Manufacturing : Proceedings of the 2005 International Manufacturing Leaders Forum, IMLF, Adelaide, S.A. [E1.1]
She, F. H.*, Kong, L. X.*, Zhang, W. S.*, Xia, F.* and Kouzani, A.* (2005) Texture analysis of textile fabrics using wavelet transform and gray-level co-occurrence features, in Ismail, W (eds), CISAR 2005 & ATCI 2005 : Conference on Intelligent Systems and Robotics and International Advanced Technology Congress : Meeting Challenges in Globablisation Through Advanced Technology, University of Putra Malaysia, Putrajaya, Malaysia [E1.1]
Shi, Y.R.*, Gao, W.M.*, Kong, L.X.* and Hsu, H.Y.* (2005) Modelling Non-Newtonian fluid response to a surface micro wave., in Unknown (ed.), Microelectronics, MEMS and Nanotechnology, SPIE Digital Library, Bellingham, Wash. [E1.1]
Xia, W.*, Gao, W.*, Hsu, H. Y.* and Kong, L. X.* (2005) Computational simulation of heat transfer in glass capillary heated by filaments, in Guo, Liejin (eds), Multiphase flow, heat mass transfer and energy conversion : fifth International Symposium held 3-6 July 2005, Xi'an, China, Xi'an Jiaotong University Press, Xi'an, China [E1.1]
Yu, Z. X.*, Shi, Y. R.*, Hsu, H. Y.* and Kong, L. X.* (2005) Application of nonlinear regression method in the evaluation of piezoelectric materials, in Simos, Theodore and Maroulis, George (eds), ICCMSE 2005 : Advances in computational methods in sciences and engineering : Selected papers from the International Conference of Computational Methods in Sciences and Engineering 2005, pp. 933-936, Brill, Leiden, The Netherlands [E1.1]
Yu, Zhenxian*, Shi, Yanru*, Hsu, Hung-Yao* and Kong, Lingxue* (2005) Design and simulation of an ultrasonic transducer., in Hariz, A. (eds), SPIE 2005 : Proceedings of the 2005 Society of Photo-optical Instrumentation Engineers, International symposium on Microelectronics, MEMS and Nanotechnology, SPIE, Brisbane, Qld. [E1.1]
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2005) Computational simulation of heat transfer and optimization of sphere regenerators, in Guo, Liejin (eds), Multiphase flow, heat mass transfer and energy conversion : fifth International Symposium held 3-6 July 2005, Xi'an, China, Xi'an Jiaotong University Press, Xi'an, China [E2]
2004 External
Gao, Weimin, Long, John, Kong, Lingxue* and Hodgson, Peter (2004) Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed, ISIJ international, vol. 44, no. 5, pp. 869-877, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-3142747729
Citation counts:Peng, Z.* and Kong, L. X.* (2004) The application of self-assembly monolayer technique into fabricating multilayer nanofilm, International journal of nanoscience, vol. 3, no. 4-5, pp. 649-654, World Scientific Publishing, Singapore [C1.1]
ERA journal ID: 5133 – Scopus EID: 2-s2.0-10844265542
Citation counts:Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Computational simulation of heat transfer from alternate heating sources, in Topping, B. H. V. and Mota Soares, C. A. (eds), Proceedings of the 4th International Conference on Engineering Computational Technology, pp. 1-9, Civil-Comp, Kippen, Scotland [E1]
Gao, Weimin, Kong, Lingxue*, Hodgson, Peter and Wang, B.* (2004) Numerical study of conduction and convection between immersed object and gas fluidized bed, in Cooper, J. (eds), Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis--2004 : presented at 7th Biennial Conference on Engineering Systems Design and Analysis, pp. 1-7, American Society of Mechanical Engineers, New York, N.Y [E1]
Gao, W. M., Kong, L. X.* and Hodgson, P. D. (2004) Computational simulation of heat transfer from alternate heating sources, in Topping, B. H. V. and Mota Soares, C. A. (eds), Progress in engineering computational technology : Proceedings of the 4th International Conference on Engineering Computational Technology, Saxe-Coburg, Stirling, Portugal [E1.1]
Kong, Lingxue*, Gao, Weimin, Evans A. M.* and Wang, B.* (2004) Influence of geometrical design and flow conditions on the performance of a microatomiser, in Cooper, J. (eds), Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis--2004 : presented at 7th Biennial Conference on Engineering Systems Design and Analysis, American Society of Mechanical Engineers, New York, N. Y. [E1.1]
Kong, L. X.*, Gao, W. M. and Hodgson, P. D. (2004) Computational simulation of gas flow and heat transfer near immersed object in fluidised bed, in Topping, B. H. V. and Mota Soares, C. A. (eds), Progress in engineering computational technology : Proceedings of the 4th International Conference on Engineering Computational Technology, pp. 1-13, Saxe-Coburg, Stirling, Portugal [E1.1]
Peng, Z.*, Li, S. D.* and Kong, L. X.* (2004) Thermal decomposition and morphology of natural rubber latex/silica nanocomposite prepared with SAM Technique, ICSM 2004 : Proceedings of the International Conference on Science and Technology of Synthetic Metals, University of Wollongong, Wollongong, N.S.W. [E1.1]
Peng, Z.*, Kong, L. X.* and Li, S. D.* (2004) Dynamic mechanical analysis of poly (vinyl alcohol)/Silica Nanocomposite Prepared with SAM Technique, ICSM 2004 : Proceedings of the International Conference on Science and Technology of Synthetic Metals, University of Wollongong, Wollongong, N.S.W. [E1.1]
Peng, Z.*, Kong, L. X.* and Li, S. D.* (2004) Crystallisation kinetics and crystallisation behaviour of PVA, ICSM 2004 : Proceedings of the International Conference on Science and Technology of Synthetic Metals, University of Wollongong, Wollongong, N.S.W. [E1.1]
Wang, B.* and Kong, L. X.* (2004) Development of a anterior implant for spinal stabilisation, ASME 2004 : Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis--2004 : presented at 7th Biennial Conference on Engineering Systems Design and Analysis : July 19-22, 2004, Manchester, England, American Society of Mechanical Engineers, New York, N. Y. [E1.1]
Xia, W.*, Hsu, H. Y.*, Kong, L.*, Evans, A.* and Lee, R.* (2004) A feasibility study on utilization of a piezoelectric atomizer for eye drug delivery application, ISRA 2004 : Proceedings of the 4th International Symposium on Robotics and Automation, ISRA, Querearo, Mexico [E1.1]
Zhang, W.*, Kong, L. X.* and She, F. H.* (2004) The development of an efficient algorithm for circular arc detection, in Salem, Sam (eds), PCMM 2004: Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success, PCMM, Box Hill, Vic. [E1.1]
Zhang, Weichen*, Kong, Ling Xue*, She, Mary*, Ji, Hong* and Yetai, Fei* (2004) A fast circle detector using ptolemy theorem, ISPMM 2004 : Proceedings of the International Symposium on Precision Mechanical, ISPMM, Beijing, China [E1.1]
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Numerical study of gas flow and heat transfer in ceramic-sphere regenerators to perform high temperature air combustion, in Salem, Sam (eds), PCMM 2004: Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success, pp. 577-584, PCMM, Box Hill, Vic. [E2]
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Numerical simulation of carbon transfer within a workpiece in a fluidised bed heat treatment furnance, in Salem, Sam (eds), PCMM 2004 : Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success, pp. 585-592, PCMM, Box Hill, Vic. [E2]
Gao, W. M., Hodgson, P. D. and Kong, L. X.* (2004) Numerical study of gas circulation in heat-treatment furnaces to perform high temperature air combustion, in Salem, Sam (eds), PCMM 2004 : Proceedings : 8th International Conference on Manufacturing and Management : Operations Management and Advanced Technology : Integration for Success, PCMM, Box Hill, Vic. [E2.1]
Gao, W. M., Feng, G. S.* and Kong, L. X.* (2004) Progress of Chinese iron and steel industry and requirement for Australian iron ore, PCMM 2004 : Proceedings : 8th International Conference on Manufacturing and Management : Operations Management and Advanced Technology : Integration for Success, PCMM, Box Hill, Vic. [E2.1]
Ji, H.*, Kong, L. X.*, Hsu, H. Y.* and Lin, G. C. I.* (2004) Tip models and force analysis of a novel straight nano probe for CMMs, in Ji, H.; Kong, L.X.; Hsu, H.Y.; Lin, G.C.I. and Fan, K.C. (eds), PCMM 2004 : Proceedings : 8th International Conference on Manufacturing and Management : Operations Management and Advanced Technology : Integration for Success, PCMM, Box Hill, Vic. [E2.1]
2003 External
Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Carburising and carbon transfer coefficient in a fluidised bed furnance, in Brown, R H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., the Conference, Melbourne, Vic [E1]
Kong, Lingxue* and Hodgson, Peter (2003) Prediction of hot strength of steels with advanced models, in Zhang, L.C. and Lu, G. (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002), pp. 743-748, Trans Tech Publications, Uetikon-Zuerich, Switzerland ; Enfield, NH [E1]
Kong, L. X.* and Hodgson, P. D (2003) Constitutive modelling of drawing and extrusion with cyclic torsion, in Zhang, L.C. and Lu, G. (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002) : 2-6 December 2002, Sydney, Australia, pp. 101-106, Trans Tech Publications, Uetikon-Zuerich, Switzerland [E1]
Hsu, C. M.* and Kong, L. X.* (2003) Marketing strategy for small application service providers in a new market, in Hanish, Jo; Falconer, Don; Horrocks, Sam and Hillier, Mathew (eds), PACIS 2003 : Proceedings of the Seventh Pacific Asia Conference on Information Systems, University of South Australia, Adelaide, S. Aust. [E1.1]
Hunter, S. L.*, Kong, L. X.* and Lin, G.* (2003) Advanced virtual engineering educational program for engineering research and teaching excellence, in Brown, R. H. (eds), ICME 2003 : Proceedings of the 9th International Conference on Manufacturing Engineering 2003, Association for Manufacturing Excellence, Melbourne, Vic. [E1.1]
Lung, D.*, Kong L X.* and Hsu, H.Y.* (2003) Photolithography area dispatching scheme for semiconductor wafer fabrication facility, in Brown, R. H. (eds), ICME 2003 : Conference proceedings International Conference on Manufacturing Engineering, Association for Manufacturing Excellence, Melbourne, Vic [E1.1]
Peng, Z.*, Kong, L. X.* and Li, S. D.* (2003) Therogravimetric kinetics and thermal decomposition of poly (vinyl alcohol), in Hock, Lim (eds), ICMAT 2003 & IUMRS-ICA 2003 : 2nd International Conference on Materials for Advanced Technologies (ICMAT 2003) & IUMRS - International Conference in Asia (ICA) 2003, Materials Research Society, Singapore [E1.1]
She, F. H.* and Kong, L. X.* (2003) Animal fibre classification using wavelet transform, in Brown, R. H. (eds), ICME 2003 : Conference proceedings International Conference on Manufacturing Engineering, The Conference, Melbourne, Vic. [E1.1]
Wahab, S. M.* and Kong, L. X.* (2003) Automated fault detection of automotive components during manufacturing, Proceedings of the 2003 International Conference on Manufacturing Excellence, The Conference, Melbourne, Vic. [E1.1]
Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Dynamic analysis of instantaneous heat transfer between immersed surface and fluidised beds based on FE Simulation, ICIAM 2003 : 5th international congress on industrial and applied mathematics, Australian Mathematical Society, Sydney, N.S.W. [E2]
Gao, W., Hodgson, P. and Kong, L.* (2003) Numerical simulation and mechanism of heat transfer in quenching fluidised beds, in Pan, Jiansheng and Totten, George E. (eds), Quenching and the Control of Distortion : Proceedings of the 4th International Conference on Quenching and the Control of Distortion, pp. 137-142, Chinese Heat Treatment Society, Beijing, China [E2]
2002 School of Engineering
She, F. H., Kong, L. X., Nahavandi, S. and Kouzani, A. Z. (2002) Intelligent animal fiber classification with artificial neural networks, Textile research journal, vol. 72, no. 7, pp. 594-600, Sage, London, England [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0036639903
Citation counts:Nahavandi, Saeid, Kouzani, Abbas, Kong, Lingxue and Trinh, Hieu (2002) On performance evaluation of ultrasonically welded joints in automobiles, in Johnson, G.; Freckleton, J.; Nahavandi, Saeid; Saadat, M. and Weiming, S. (eds), Third International ICSC-NAISO Congress on World Manufacturing : WMC 2001 : program and proceedings : at the Rochester Institute of Technology, NY, USA, September 24-27, 2001, ICSC-NAISO Academic Press, New York, N.Y. [E1]
2002 External
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2002) Numerical simulation of heat and mass transfer in fluidised bed heat treatment furnaces, Journal of materials processing technology, vol. 125-126, no. 9, pp. 170-178, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047824
Citation counts:Kong, Lingxue* and Nahavandi, Saeid (2002) On-line tool condition monitoring and control system in forging processes, Journal of materials processing technology, vol. 125, no. 126, pp. 464-470, Elsevier Science BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047912
Citation counts:Zheng, Hong, Kong, Lingxue* and Nahavandi, Saeid (2002) Automatic inspection of metallic surface defects using genetic algorithms, Journal of materials processing technology, vol. 125, no. 126, pp. 427-433, Elsevier Science B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047855
Citation counts:Kong, L. X.*, Tung, K. L.*, Chuang, C. J.* and Lu, W. M.* (2002) Hydraulic radius of three dimensional woven fabric structures, Journal of the Chinese institute of chemical engineers, vol. 33, no. 3, pp. 297-305, Elsevier BV, Amsterdam, The Netherlands [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts:Kouzani, Abbas, Nahavandi, Saeid, Kong, Lingxue*, Narayan, M. and Zheng, H. (2002) Detecting face component patterns within images using a multistage neural network, in Arabnia, Hamid R. and Mun, Youngsong (eds), Proceedings of the CISST'02 : proceedings of the International Conference on Imaging Science, Systems, and Technology : Las Vegas, Nevada, USA, June 24-27, 2002, pp. 825-829, CSREA Press, Athens, Ga [E1]
Kong, L. X.*, She, F. H.*, Nahavandi, S. and Kouzani, A. Z. (2002) Feature extraction for animal fiber identification, in Sui, Wei (eds), SPIE 2002 : 2nd International Conference on Image and Graphics. Proceedings, pp. 699-704, SPIE, International Society for Optical Engineering, Bellingham, Wash. [E1.1]
2001 School of Engineering
Kong, Lingxue, Wang, B.* and Hodgson, Peter (2001) Prediction of stress-strain behaviors in steels using an integrated constitutive, FEM and ANN model, ISIJ international, vol. 41, no. 7, pp. 795-800, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: Not tagged
Citation counts:Kong, Lingxue, Lin, L. and Hodgson, Peter (2001) Material properties under drawing and extrusion with cyclic torsion, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 308, no. 1-2, pp. 209-215, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: Not tagged
Citation counts:Wang, B.*, Klepaczko, J.*, Lu, G.* and Kong, Lingxue (2001) Viscoplastic behaviour of porous bronzes and irons, Journal of materials processing technology, vol. 113, no. 1-3, pp. 574-580, Elsevier Science SA, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
Citation counts:She, F.H., Kong, L.X., Nahavandi, S. and Kouzani, A.Z. (2001) Animal fibre classification, Textile Asia, vol. 32, no. 11, pp. 44-47, Business Press Ltd, Hong Kong [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts:She, F. H., Chow, S., Wang, B. and Kong, L. X. (2001) Identification and classification of animal fibres using artificial neural networks, Journal of textile engineering, vol. 47, no. 2, pp. 35-38, Nihon Sen'i Kikai Gakkai, Osaka-shi, Japan [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts:del Mar, J., Parsons, T., Nahavandi, Saeid, Kouzani, Abbas and Kong, Lingxue (2001) Development of an on-line tool condition monitoring system in cold bulk metal forming, in Unknown (ed.), Proceedings of the International NAISO Congress on Information Science Innovations : ISI'2001, March 17-21, 2001, The American University in Dubai, Dubai, U.A.E., pp. 509-515, ICSC Academic Press, Millet, Alberta [E1]
Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2001) Numerical simulation of heat transfer and temperature fields of workpiece in fluidized bed heat treatment furnaces, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 25-31, IMEA, Melbourne, Vic [E1]
Kong, Lingxue and Gao, Weimin (2001) Thermal control of high pressure die casting using computational fluid dynamics, in Mori, Ken-ichiro (eds), Simulation of materials processing: theory, methods and applications: proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes - NUMIFORM 2001, pp. 1073-1078, A.A. Balkema, Lisse; Exton [E1]
Kong, Lingxue and Nahavandi, Saeid (2001) Design of chassis in formula SAE car using finite element methods, in Parsaei, H.R.; Gen, M.; Leep, H.R. and Wong, J.P. (eds), Design and manufacturing automation for the 21st century : 5th International Conference on Engineering Design and Automation, EDA Conference ; [the Regent Hotel, Las Vegas, Nevada, USA] ; refereed conference papers, pp. 317-322, Integrated Technology Systems, Prospect, Ky [E1]
Kong, Lingxue (2001) Internal cooling system design and fuzzy thermal control, in Parsaei, H.R.; Gen, M.; Leep, H. and Wong, J. (eds), Design and manufacturing automation for the 21st century : 5th International Conference on Engineering Design and Automation, EDA Conference ; [the Regent Hotel, Las Vegas, Nevada, USA] ; refereed conference papers, pp. 706-712, Integrated Technology Systems, Prospect, Ky [E1]
Ma, Xiang, Barnett, Matthew and Kong, Lingxue (2001) Slab analysis of cyclic torsional extrusion, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 38-43, IMEA, Melbourne, Vic [E1]
Nahavandi, Saeid, Kong, Lingxue, Kouzani, Abbas and Trinh, Hieu (2001) Heuristics solutions for scheduling in wire harness production, in Sobh, T. M. and Elleithy, K. M. (eds), IETA 2001 : Proceedings of the International Conference on Industrial Electronics, Technology & Automation, IETA, Cairo, Egypt [E1]
Reininga, A.*, Kelder, M.*, Nahavandi, Saeid and Kong, Lingxue (2001) Computational simulation of chassis design and manufacturing, in Habruken, A.M. (eds), Proceedings of the 4th International ESAFORM Conference on Material Forming, Liege, Belgium, April 23-25, 2001, pp. 781-784, Universite de Liege, Liege, Belgium [E1]
Kong, Lingxue (2001) Industrial application of thermal image processing and thermal control, in Li, Deren (eds), SPIE 2001 : Data mining and applications : 23-24 October 2001, Wuhan, China, pp. 139-144, SPIE, Washington, D.C. [E1.1]
Citation counts:Kong, Lingxue, Li, Yi*, She, Mary F.H., Gao, Weimin and Wong, B. Z.* (2001) Effect of fibre geometry and porosity on heat and moisture transfer in textiles, An Odyssey in Fibres and Space : Textile Institute 81st World Conference, Textile Institute, Manchester, England [E2]
Kong, Lingxue and She, F. H. (2001) Image processing and pattern recognition in textiles, in Li, Deren (eds), SPIE 2001 : Data mining and applications : 23-24 October 2001, Wuhan, China, pp. 1-6, SPIE, Washington, D.C. [E2]
Kong, Lingxue, Li, Yi*, Zhang, X* and She, Mary F.H. (2001) Computational simulation of fibre configuration in yarns and its movement during yarn deformation, Proceedings of the 6th Asian textile conference : innovation and globalization, Hong Kong Institution of Textiles and Clothing, Hong Kong [E2]
Kong, Lingxue, Ma, Xiang, Wang, B.* and Lu, G.* (2001) Computational simulation of thin film coating during scratching, in Meech, John A. (eds), IPMM-2001, the Third International Conference on Intelligent Processing and Manufacturing of Materials, pp. 1-8, CRC Press, Boca Raton, Fla. [E2]
Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Formation mechanism of inner-wall fold in thick lead tube under axial compression with fixed ends, in Wong, Joseph (eds), Proceedings of the Worley Australasian Finite Element Conference : the Windsor, Melbourne, Australia : 22-23 February 2001, pp. 140-149, Worley Limited, Melbourne, Vic. [E2]
Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Numerical simulation of forward extrusion with cyclic die rotation, in Meech, John A. (eds), IPMM-2001: the Third International Conference on Intelligent Processing and Manufacturing of Materials and Manufacturing of Materials 3rd International Conference, pp. 1-11, CRC Press, Boca Raton, Fla. [E2]
She, F.H., Nahavandi, S., Kouzani, A.Z. and Kong, L.X. (2001) Development of a hybrid artificial neural network to identify animal fibres from their scale images, Proceedings of the 6th Asian textile conference : innovation and globalization, Hong Kong Institution of Textiles and Clothing, Hong Kong [E2]
Tung, G.L.*, Kong, L.X., Lu, W.M.* and She, F.H. (2001) Calendering effect of woven fabric on its filtration properties, Proceedings of the 6th Asian textile conference : innovation and globalization, Hong Kong Institution of Textiles and Clothing, Hong Kong [E2]
She, F. H., Kong, L. X., Nahavandi, S. and Kouzani, A. Z. (2001) WoolNet : a hybrid artificial neural network wool fibre identifier, An Odyssey in Fibres and Space : Textile Institute 81st World Conference, Textile Institute, Manchester, England [E2.1]
2001 School of Engineering and Information Technology
Kong, L.X., She, F.H., Nahavandi, S. and Wang, L.H.* (2001) Thermal control with image processing and fuzzy neural networks, in Smith, Michael H.; Gruver, W. A. and O'Higgins Hall, Lawrence (eds), Joint 9th IFSA World Congress and 20th NAFIPS International Conference : proceedings : July 25-28, 2001, Vancouver, British Columbia, Canada, pp. 1443-1449, IEEE, Piscataway, N.J. [E1.1]
She, F.H., Kong, L.X., Nahavandi, S. and Kouzani, A.Z. (2001) Fuzzy pattern recognition and classification of animal fibers, in Smith, Michael H.; Gruver, W. A. and O'Higgins Hall, Lawrence (eds), Joint 9th IFSA World Congress and 20th NAFIPS International Conference : proceedings : July 25-28, 2001, Vancouver, British Columbia, Canada, pp. 1050-1055, IEEE, Piscataway, N.J. [E1.1]
2000 School of Engineering
Kong, L. and Hodgson, P. (2000) Constitutive modelling of extrusion of lead with cyclic torsion, Materials Science and Engineering, vol. 0, no. 0, pp. 32-38, Elsevier Science, Lausanne [C1]
ERA journal ID: 4973 – Scopus EID: Not taggedKong, L., Hodgson, P. and Collinson, D.* (2000) Extrapolative prediction of the hot strength of austenitic steels with a combined constitutive and ANN model, Journal of Materials Processing Technology, vol. 0, no. 0, pp. 84-89, Elsevier Science, UK [C1]
ERA journal ID: 3689 – Scopus EID: Not taggedKong, L. and Hodgson, P. (2000) Predicting flow strength of austenitic steels with an IPANN model using different training strategies, Advances in Engineering Software, vol. 0, no. 0, pp. 945-954, Elsevier Science, Edinburgh, UK [C1]
ERA journal ID: 22083 – Scopus EID: Not taggedKong, L. and Platfoot, R.* (2000) Fibre transportation in confined channel with recirculations, Computers and Structures, vol. 0, no. 0, pp. 237-245, Elsevier Science, Oxford [C1]
ERA journal ID: 4176 – Scopus EID: Not taggedMa, X., Wang, B.*, Kong, L. and Barnett, M. (2000) FEM Simulation of Torsion Tests for Pre-Deformed Lead with Work-Softening, Key Engineering Materials, vol. 0, no. 0, pp. 407-412, Trans Tech Publications, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: Not taggedKong, L., Wang, B.* and Lu, G. (2000) Experimental and Computational Characterising Method for Thin Film Coating, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
Kong, L., Nahavandi, S., Baliga, B. and Kouzani, A. (2000) Application of Image Processing in Analysing HPDC Thermal Images, in Xu Guan hua (ed.), Journal of Image and Graphics: Proceedings of ICIG' 2000, pp. 269-272, Publishing Board of JIG, Beijing, China [E1]
Kong, L., Hodgson, P. and Nahavandi, S. (2000) Development of an Intelligent Decision Support System for Metal Forming Industry, in G. Altmann, J. Lamp, P. Mandal, R. Smith & M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 306-311, Deakin University, Geelong, Australia [E1]
Kong, L., Wang, B.*, Lu, G.* and Ma, X. (2000) Computational Characterising of Thin Film Coating, in Professor E.D Doyle (ed.), 12th International Federation for Heat Treatment and Surface Engineering Congress, pp. 223-228, Institute of Materials Engineering Australasia Ltd, Australia [E1]
Kong, L. and Hodgson, P. (2000) Prediction of deformation force at different strains during steel rolling, in M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 263-267, Balkema, Rotterdam, Rotterdam [E1]
Kong, L., Nahavandi, S. and Baliga, B. (2000) PARAMETRICAL INVESTIGATION OF HIGH PRESSURE DIE CASTING PROCESS, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, pp. 1-5, Causal Productions/Institution of Engineers Australia, Sydney, Australia [E1]
Kouzani, A., Nahavandi, S., Kong, L. and She, Mary F.H. (2000) Pixel-Based Correspondence for Facial Images, in Xu Guan hua (ed.), Journal of Image and Graphics: Proceedings of ICIG' 2000, pp. 338-341, Publishing Board of JIG, Beijing, China [E1]
Nahavandi, S., Kouzani, A. and Kong, L. (2000) Application of a Scaled Conjugate Gradient Algorithm for Feed Forward Artificial Neural Networks, in Xu Guan hua (ed.), Journal of Image and Graphics: Proceedings of ICIG' 2000, pp. 273-276, Publishing Board of JIG, Beijing, China [E1]
Baliga, B., Nahavandi, S. and Kong, L. (2000) CYCLE TIME REDUCTION IN HIGH PRESSURE DIE CASTING, 2000 Pacific Conference on Manufacturing, pp. 500-505, Lawrence Technological University, USA [E2]
Kong, L., Nahavandi, S. and Baliga, B. (2000) Defect analysis of high pressure die castings with artificial intelligence technology, in n/a (ed.), 2000 Pacific Conference on Manufacturing, pp. 506-511, Lawrence Technological University, USA [E2]
Kong, L. and Wang, X. (2000) PREDICTION OF YARN PROPERTIES USING ARTIFICIAL NEURAL NETWORKS, in The Textile Institute (ed.), 80th World Conference of The Textile Institute, pp. 1-10, The Textile Institute, Manchester, UK [E2]
Kong, L. and Hodgson, P. (2000) Development of an artificial neural network model integrated with constitutive and FEM models, in P.Martin, S.Macewen, Y.Verreman, W.J. Liu, J. Goldak (eds), Mathematical Modeling in Metal Processing and Manufacturing, 2000 Conference of Metallurigists, Canada [E2]
Kong, L. and Platfoot, R.* (2000) THREE DIMENSIONAL ANALYSIS OF AIR FLOW IN A CURVED CONVERGING CHANNEL, in Professor B.H.V. Topping (ed.), 5th International Conference on Computational Structures Technology: Computational Mechanics: Techniques and Development, pp. 303-309, CIVIL-COMP Press, Edinburgh, Scotland [E2]
Kong, L., Wang, B.* and Lu, G.* (2000) EXPERIMENTAL AND COMPUTATIONAL APPROACHES IN CHARACTERISING THIN FILM COATING, in professor W.B. Lee (ed.), 9th International Manufacturing Conference in China, pp. 139-141, The Hong Kong Polytechnic University, Hong Kong [E2]
Kong, L., Nahavandi, S. and Baliga, B. (2000) Identification of Critical Processing Parameters of High Pressure Die Casting Process Using Artificial Neural Networks, in K.S.Taraman (ed.), 2000 Pacific Conference on Manufacturing, pp. 493-498, Lawrence Technological University, USA [E2]
Zhang, X.*, Li, Y.*, Yeung, K.*, Yao, M.* and Kong, L. (2000) A FINITE ELEMENT STUDY OF STRESS DISTRIBUTION IN TEXTILES WITH BAGGING, in Professor B.H.V Topping (ed.), 5th International Conference on Computational Structures Technology, pp. 235-242, CIVIL-COMP Press, Edinburgh, UK [E2]
2000 School of Engineering and Information Technology
Kong, L.X., She, F.H., Nahavandi, S. and Kouzani, A.Z. (2000) Die temperature monitoring of high pressure die casting, SMC 2000 conference proceedings : 2000 IEEE International Conference on Systems, Man & Cybernetics : Cybernetics evolving to systems, humans, organizations, and their complex interactions : October 8-11, 2000, Sheraton Music City Hotel, Nashville, Tenness, pp. 1756-1761, IEEE, Piscataway, N.J. [E2]
Kouzani, A.Z., Nahavandi, S., Kouzani, N., Kong, L.X. and She, F.H. (2000) A morphing technique for facial image representation, SMC 2000 conference proceedings : 2000 IEEE International Conference on Systems, Man & Cybernetics : Cybernetics evolving to systems, humans, organizations, and their complex interactions : October 8-11, 2000, Sheraton Music City Hotel, Nashville, Tenness, pp. 1378-1383, IEEE Xplore, Piscataway, N.J. [EN]
2000 Institute for Frontier Materials
Kouzani, A.Z., Nahavandi, S., Kong, L.X. and She, F.H. (2000) Pixel-based correspondence for facial images, International Journal of Images and Graphics, vol. 5, pp. 338-341, World Scientific, Singapore ; River Edge, NJ [C3]
ERA journal ID: 10381 – Scopus EID: Not tagged1999 School of Engineering
Hodgson, P., Kong, L. and Davies, C.* (1999) The Predication of Hot Strength in Steels with an Integrated Phenomenological and Artificial Neural Network Model., Journal of Materials Processing Technology, vol. 0, no. 0, pp. 1-8, Elsevier, Amsterdam [C1]
ERA journal ID: 3689 – Scopus EID: Not taggedKong, L. and Hodgson, P. (1999) The Application of Constitutive and Artificial Neural network Models to Predict the Hot Strength of Steels., ISIJ International, vol. 0, no. 0, pp. 991-998, ISIJ, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: Not taggedKong, L., Hodgson, P. and Wang, B. (1999) Development of Constitutive Models for Metal Forming with Cyclic Strain Softening, Journal of Materials Processing Technology, vol. 0, no. 0, pp. 44-50, Elsevier, Amsterdam [C1]
ERA journal ID: 3689 – Scopus EID: Not taggedKong, L., Hodgson, P., Um, K. and Wang, B. (1999) Effect of modelling accuracy of hot strength on hot rolling, in J.H. Beynon et al (ed.), Modelling of Metal Rolling Processes 3, pp. 116-122, 10M Communications Ltd, London, UK [E2]
Kong, L., Hodgson, P., Lin, L. and Wang, B. (1999) Material Properties under Drawing and Extrusion with Cyclic Torsion, 2nd International Conference on Intelligent Processing and Manufacturing of Materials (IPMM 99), pp. 953-958, IEEE, Vancouver [E2]
Kong, L. and Hodgson, P. (1999) Improving the Prediction Accuracy of Constitutive Model with ANN Models, 2nd International Conference on Intelligent Processing and Manufacturing of Materials (IPMM 99), pp. 389-394, IEEE, Vancouver [E2]
Lin, L., Bathgate, R., Kong, L., Hodgson, P., Wang, B. and Lu, G.* (1999) The Effect of Die Design on the Extrusion with Combined Torsion, in J.W.H. Price (ed.), Tooling '99, pp. 45-49, Institute of Materials Engineering Australasia Ltd, Melbourne [E2]
Kong, Lingxue, She, Mary F. H., Tung, Kuo-Lun and Lu, W.M.* (1999) FEM investigation of heat transfer through fibre, yarns and fabrics, Proceedings ATC '99, the 5th Asian Textile Conference : Diversity in harmony: Asian textile in the 21st century September 30-October 2, 1999., pp. 125-128, The Conference, Kyoto, Japan [L2]
Kong, L. and Hodgson, P. (1999) Constitutive Analysis of Flow Strength of Austenitic Steels with the Integration of ANN Models, Progress in Mechanical Behaviour of Materials, Proceedings of the 8th Conference on the Mechanical Behaviour of Materials (ICM8), pp. 1071-1076, Fleming Printing Ltd, Victoria, Canada [L2]
Kong, L., Li, L., Hodgson, P. and Wang, B. (1999) Behaviour of Materials under Combined Extrusion and Cyclic Torsion, Progress in Mechanical Behaviour of Materials, Proceedings of the 8th Conference on the Mechanical Behaviour of Materials (ICM8), pp. 195-200, Fleming Printing Ltd, Victoria, Canada [L2]
Kong, L.X. and She, F.H. (1999) Development of an online quality control system for textile manufacturing, ATC 99. Proceedings of the 5th Asian Textile Research Conference, held Kyoto Research Park, Kyoto, Japan, 30 September - 2 October 1999. Diversity in harmony., pp. 1024-1027, FAPTA, Kyoto, Japan [L2]
She, F.H., Chow S., Wang, B., Bathgate, R. and Kong, L.X. (1999) Animal fibre identification using image processing and artificial neural networks, ATC 99. Proceedings of the 5th Asian Textile Research Conference, held Kyoto Research Park, Kyoto, Japan, 30 September - 2 October 1999. Diversity in harmony., pp. 99-102, FAPTA, Kyoto, Japan [L2]
She, F.H., Chow, S., Wang, B and Kong, L.X. (1999) An artificial neural network model to predict the visual distinction between dyed fabrics, ATC 99. Proceedings of the 5th Asian Textile Research Conference, held Kyoto Researcg Park, Kyoto, Japan, 30 September - 2 October 1999. Diversity in harmony., FAPTA, Kyoto, Japan [L2]
She, Mary F.H., Chou, S., Wang, B. and Kong, L. (1999) An Artificial Neural Network Model to Predict the Visual Distinction between Dyed Fabrics, The 5th Asian Textile Conference (ATC5), p. 301, Federation of Asian Professional Textile Associati, Kyoto, Japan [L3]
1998 School of Engineering
Kong, L., Hodgson, P. and Collinson, D.* (1998) Modelling the Effect of Carbon Content on Hot Strength of Steels Using a Modified Artificial Neural Network, ISIJ International, vol. 0, no. 0, pp. 1121-1129, Iron and Steel Inst. of Japan, "Tokyo, Japan" [C1]
ERA journal ID: Not matching ERA journal listWang, B., Kong, L., Hodgson, P. and Collinson, D.* (1998) Improvement of the Prediction Accuracy and Efficiency of Hot Strength of Austenitic Steels with Optimised ANN Training Schemes, Metals and Materials, vol. 0, no. 0, pp. 823-826, Korean Institute of Metals and Materials, "Seoul, Korea" [C1]
ERA journal ID: Not matching ERA journal listWang, B., Hu, W., Kong, L. and Hodgson, P. (1998) The Influence of Rolling Speed on the Rolling of Metal Plates, Metals and Materials, vol. 0, no. 0, pp. 915-919, Korean Institute of Metals and Materials, "Seoul, Korea" [C1]
ERA journal ID: Not matching ERA journal listKong, L., Hodgson, P. and Collinson, D.* (1998) Optimisation of ANN Models to Predict the Effect of Carbon Content on the Hot Strength of Austenite, Proceedings of Materials '98, pp. 553-558, "Institute of Materials Engineering, Australasia", Wollongong [E2]
Kong, L., Collinson, D.* and Hodgson, P. (1998) Application of an Integrated Phenomenological Neural Network Model to Extrapolatively Predict the Hot Strength of Austenitic Steels, Steel Rolling '98, pp. 540-545, Iron & Steel Institute of Japan, Japan [E2]
Kong, L. and Hodgson, P. (1998) Development of an ANN Model Strategy to Improve the Prediction of Flow Strength of Austenitic Steels, Advances in Engineering Computational Technology, pp. 155-164, Civil-Comp Press, "Edinburgh, UK" [E2]
Kong, L. and Platfoot, R.* (1998) Investigating the Fibre Configuration in Confined Channel Flow with Recirculations, Advances in finite Element Procedures and Techniques, pp. 291-298, Civil-Comp Press, "Edinburgh, UK" [E2]
1997 School of Engineering
Hodgson, P., Collinson, D.*, Davies, C.* and Kong, L. (1997) "The Application of Phenomenological, Empirical and Ann Models to the Prediction of Hot Strength in Steels.", Australiaasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 1248-1254, IPMM 97, QLD [E2]
Kong, L.X., Platfoot, R.A.*, She, F.H.* and Hodgson, P.D. (1997) Moisture transfer through porous textiles with temperature differences, Proceedings ATC '97 : the 4th Asian Textile Conference : Safe comfortable and ecological textiles for the 21st century's needs., pp. 654-660, The Conference, Taipei [E2]
Grants and Consultancies
All years
Research Income - National Competitive Grants
Duan, W and Kong, L. Smart bombing of cancer stem cells using aptamer-guided nanoliposomal siRNA, DIISR/AISRF Grant - AISRF/Indo-Australian Strategic Research Fund [T]
- 2011: $112,000
- 2010: $145,000
Kong, L, Wang, X and Lin, T. Formation and characterisation of continuous electrospun nanofibre yarns, ARC Collaborative - Linkage - Projects (Round 1) [T]
- 2011: $101,609
- 2010: $102,075
Kong, L, She, M and Trengove, R*. Feedwater characterisation, CSIRO Flagship Collaboration Research Fund [T]
- 2010: $32,172
- 2009: $94,786
- 2008: $123,548
- 2007: $120,237
Kong, L and Zhang, J. Fabrication and characterisation of novel nanostructured lyotropic liquid crystalline membranes., CSIRO Commonwealth Scientific and Industrial Research Organisation [T]
- 2010: $4,000
- 2009: $11,000
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]
- 2004: $76,513
- 2003: $117,047
- 2002: $46,066
Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]
- 2003: $62,506
- 2002: $60,749
- 2001: $68,379
Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]
- 2002: $104,950
- 2001: $99,915
- 2000: $96,105
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]
- 2002: $47,970
Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]
- 2001: $6,947
Research Income - Other Public Sector Funding
Kong, L and Zhang, J. Fabrication and characterisation of novel nanostructured lyotropic liquid crystalline membranes. [U]
- 2011: $5,500
- 2010: $7,000
Kong, L. Synthesis and characterisation of nanostrucutred membranes for desalination [U]
- 2010: $6,200
Kong, L. Technical Presentation Visit (TPV) to China in June 2009 [U]
- 2009: $19,400
Duan, W, Danks, A*, Dong, Q*, Kong, L, Liu, J*, Dai, J*, Famulok, M* and Joubert, D*. Establishment of an aptamer-based technology platform for molecular targetting of cancer stem cell [U]
- 2008: $136,346
Research Income - Industry and Other Funding
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]
- 2004: $25,000
- 2003: $25,000
- 2002: $25,000
Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]
- 2002: $39,500
- 2001: $45,000
- 2000: $45,000
Research Income - Industry and Other Funding - International A (Competitive, Peer-Reviewed Research Grant Income)
Kong, L, Wang, X and Lin, T. Formation and characterisation of continuous electrospun nanofibre yarns [V.2]
- 2010: $8,000
Research Income - Industry and Other Funding - International B (Other Income)
Kong, L. Development of a bio-degradable rubber/polymer base for chewing gum [V.3]
- 2007: $55,000
Research Income - Other Funding Sources
She, M, Kong, L and Chen, R. C3-501, Smart Seat for Monitoring Driver's Attentive State and Detecting Early Sign of Fatigue, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]
- 2011: $25,204
- 2010: $26,356
- 2009: $33,000
Kong, L and Li, C. Ultrastrong polymer nanocomposites for future automobiles C1-512, CRC for Advanced Auto Technology - Scholarship, CRC for Advanced Auto Technology - Scholarship [X]
- 2011: $25,274
- 2010: $26,356
Rolfe, B and Kong, L. Lightweight Vehicle Structures, C1-802, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]
- 2011: $63,750
- 2010: $0
Higher Degree by Research Completions supervised by Lingxue Kong
2012
Yichao Wang
Doctor of Philosophy, Thesis entitled: pH-sensitive and targeted PLGA-based Drug Delivery to Colorectal Cancer.
Institute for Frontier MaterialsJuan Zhang
Doctor of Philosophy, Thesis entitled: Polymeric Materials with Ordered Nanostructures Templated From Hexagonal Lyotropic Liquid Crystals.
Institute for Frontier Materials2011
Puwang Li
Doctor of Philosophy, Thesis entitled: Microencapsulation of Chitosan Nanoparticles for Selective Drug Delivery to Colon.
Institute for Frontier Materials2009
Sugumar Dharmalingam
Doctor of Philosophy, Thesis entitled: Design Fabrication and Evaluation of Novel Polymerase Chain Reaction Devices.
Institute for Frontier Materials
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Friday 24th May 2013 10:04pm
