Research Services Division

Deakin Research

Research Output for Michael P Pereira

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2013 Institute for Frontier Materials

Pereira, Michael P., Weiss, Matthias, Rolfe, Bernard F. and Hilditch, Tim B. (2013) The effect of the die radius profile accuracy on wear in sheet metal stamping, International journal of machine tools and manufacture, vol. 66, pp. 44-53, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3606 – Scopus EID: 2-s2.0-84871738769
DRO entry for this publication

Pereira, Michael P., Weiss, Matthias and Rolfe, Bernard F. (2013) Towards tool life precition in sheet metal stamping, in Unknown (ed.), TTP 2013 : Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference, pp. 1-10, The Conference, Graz, Austria [E2]
DRO entry for this publication

2012 Institute for Frontier Materials

Okonkwo, Paul C., Kelly, Georgina, Rolfe, Bernard F. and Pereira, Michael P. (2012) The effect of temperature on sliding wear of steel-tool steel pairs, Wear, vol. 282-283, pp. 22-30, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84858702686
DRO entry for this publication

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2012) Wear at the die radius in sheet metal stamping, Wear, vol. 274-275, pp. 355-367, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84855268548
Citation counts: Scopus - 2
DRO entry for this publication

Yan, Wenyi*, Pereira, Michael P. and Rolfe, Bernard F. (2012) Tool wear in sheet metal stamping, Advanced materials research, vol. 421, pp. 750-753, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84255177644
DRO entry for this publication

Rolfe, Bernard and Pereira, Michael (2012) Contact conditions and thermal effects on tooling wear when stamping AHSS, in Unknown (ed.), ICMPC 2012 : Proceedings of the 2nd International Conference on Materials, Processing and Characterization, The Conference, Hyderabad, India [E3]
DRO entry for this publication

2011 Institute for Frontier Materials

Okonkwo, Paul C., Pereira, Michael P., Kelly, Georgina and Rolfe, Bernard F. (2011) Effects of temperature in relation to sheet metal stamping, in Mastorakis, Nikos; Mladenov, Valeri; Lepadatescu, Badea; Karimi, Hamid Reza and Helmis, Costas G. (eds), MEQAPS 2011 : Proceedings of the 4th International Conference on Manufacturing Engineering, Quality and Production Systems, pp. 114-118, World Scientific and Engineering Academy and Society (WSEAS), Barcelona, Spain [E1]
DRO entry for this publication

2010 Institute for Frontier Materials

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2010) Sliding distance, contact pressure and wear in sheet metal stamping, Wear, vol. 268, no. 11-12, pp. 1275-1284, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-77951107324
Citation counts: Scopus - 6, Thomson - 6
DRO entry for this publication

Pereira, Michael P., Okonkwo, Paul C., Yan, Wenyi* and Rolfe, Bernard F. (2010) Deformation and frictional heating in relation to wear in sheet metal stamping, Steel research international, vol. 81, no. 9, pp. 713-716, Wiley – VCH Verlag, Weinheim, Germany [C1]
ERA journal ID: 44873 – Scopus EID: Not tagged
Citation counts: Thomson - 2
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, Other international (5) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) BODY FOR PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) PNEUMATIC POWERTRAIN FOR AN AUTOMOTIVE VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) CHASSIS FOR PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) Pneumatic vehicle, Pneumatic vehicle, UNIV DEAKIN, Australia (1) [I]
DRO entry for this publication

2009 Institute for Frontier Materials

Pereira, Michael P., Duncan, John L.*, Yan, Wenyi* and Rolfe, Bernard F. (2009) Contact pressure evolution at the die radius in sheet metal stamping, Journal of materials processing technology, vol. 209, no. 7, pp. 3532-3541, Elsevier B.V., Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-62949188952
Citation counts: Scopus - 11, Thomson - 11
DRO entry for this publication

Weiss, Matthias, Pereira, Michael, Rolfe, B. F. and Hilditch, Tim (2009) Wear mechanisms in forming of HSS and AHSS, in Levy, B.S.; Matlock, D.K. and Van Tyne, C.J. (eds), IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the 2009 International Deep-Drawing Research Group annual conference, pp. 691-702, IDDRG, Golden, Colo. [E1.1]
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Asgari, S.A., Pereira, M., Rolfe, B.F., Dingle, M. and Hodgson, P.D. (2008) Statistical analysis of finite element modeling in sheet metal forming and springback analysis, Journal of materials processing technology, vol. 203, no. 1-3, pp. 129-136, Elsevier SA, Zürich, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-43849103630
Citation counts: Scopus - 17, Thomson - 17
DRO entry for this publication

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2008) Contact pressure evolution and its relation to wear in sheet metal forming, Wear, vol. 265, no. 11-12, pp. 1687-1699, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-54149109135
Citation counts: Scopus - 19, Thomson - 19
DRO entry for this publication

Pereira, M. P., Yan, W.* and Rolfe, B. F. (2008) Contact pressure prediction in sheet metal forming using finite element analysis, in Asnafi, Nader (eds), IDDRG 2008 : Proceedings of the IDDRG 2008 Conference : Best in class stamping, 16-18 June 2008, Olofström, Sweden, pp. 361-371, Industriellt utvecklingscentrum i Olofström AB, Olofström, Sweden [E1]
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Pereira, Michael, Yan, Wenyi and Rolfe, Bernard (2007) Modeling of contact pressure in sheet metal forming, Materials Science Forum, vol. 561, no. 565, pp. 1975-1978, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 7
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Pereira, Michael, Yan, Wenyi and Rolfe, Bernard (2006) Contact pressure and wear in sheet metal forming - an FEM analysis, in Hoffman, Mark and Price, John (eds), SIF 2006 : Conference Proceedings of the International Conference and Exhibition on Structural Integrity and Failure, pp. 73-77, Materials Australia, Sydney, N.S.W. [E1]
DRO entry for this publication

2005 School of Engineering

Pereira, Michael, Asgari, Alireza, de Souza, Timothy, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Sheet forming simulation and springback prediction for AHSS automotive components, in Miles, M. P. and Stoudt, M. R. (eds), Copper for the 21st century : proceedings of the conference held September 25-28, 2005 Pittsburgh, Pennsylvania USA, pp. 51-62, ASM International, Warrendale, Pa. [E1]
DRO entry for this publication

Asgari, Alireza, Pereira, Michael, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Design of experiments and springback prediction for AHSS automotive components with complex geometry, in Smith, L.M.; Pourboghrat, F.; Yoon, J.W. and Stoughton, T.B. (eds), NUMISHEET 2005 : Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 215-220, American Institute of Physics (AIP), Melville, N.Y. [E2]
DRO entry for this publication

2004 School of Engineering

Asgari, Alireza, Pereira, Michael, Clark, Ben, Dingle, Matthew and Hodgson, Peter (2004) Sheet forming simulation for AHSS components in the automotive industry, in Ghosh, S.; Castro, J.C. and Lee, J.K. (eds), Materials processing and design : modeling, simulation and applications : NUMIFORM 2004, pp. 977-982, American Institute of Physics, Melville, N.Y. [E2]
DRO entry for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Rolfe, B, Hodgson, P, Forsyth, M, Xiang, Y, Doolan, M* and Pereira, M. Developing an environmentally friendly, low cost solution to reduce wear and improve productivity in metal forming, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2012: $163,652

Higher Degree by Research Completions supervised by Michael P Pereira

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Sunday 20th April 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011