Research Output for Dale Atwell
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
2012 Institute for Frontier Materials
Atwell, D.L., Barnett, M.R. and Hutchinson, W.B. (2012) The effect of initial grain size and temperature on the tensile properties of magnesium alloy AZ31 sheet, Materials science and engineering A, vol. 549, pp. 1-6, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: Not taggedDRO entry for this publication
2010 Institute for Frontier Materials
Stanford, Nicole, Atwell, Dale and Barnett, Matthew R. (2010) The effect of Gd on the recrystallisation, texture and deformation behaviour of magnesium-based alloys, Acta materialia, vol. 58, no. 20, pp. 6773-6783, Elsevier BV, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-77957980680
Citation counts:Scopus - 15,
Thomson - 15
Barnett, M. R., Beer, A., Atwell, D., Davies, C. H. J.* and Abbott, T.* (2010) Exploiting low levels of rare earth addition in Mg extrusion alloys, in Agnew, Sean R.; Neelameggham, Neale R.; Nyberg, Eric A. and Sillekens, Wim H. (eds), Magnesium Technology 2010 : Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS), pp. 353-357, The Minerals, Metals & Materials Society (TMS), Warrendale, Pa. [E1]
2009 Institute for Frontier Materials
Hilditch, Tim, Atwell, Dale, Easton, Mark* and Barnett, Matthew Robert (2009) Performance of wrought aluminium and magnesium alloy tubes in three-point bending, Materials and design, vol. 30, no. 7, pp. 2316-2322, Elsevier, Oxford, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-67349091160
Citation counts:Hilditch, Tim, Atwell, Dale and Beer, Aiden G. (2009) Effect of grain size on the performance of extruded magnesium alloy tubes in three-point bending, Materials science forum, vol. 618-619, pp. 523-526, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list2008 Centre for Material and Fibre Innovation
Stanford, Nicole, Atwell, Dale, Beer, Aiden, Davies, C.* and Barnett, Matthew (2008) Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys, Scripta materialia, vol. 59, no. 7, pp. 772-775, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-47749116833
Citation counts:2007 Centre for Material and Fibre Innovation
Atwell, Dale and Barnett, Matthew (2007) Extrusion limits of magnesium alloys, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 38, no. 12, pp. 3032-3041, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-36448964474
Citation counts:Barnett, Matthew, Atwell, Dale and Beer, Aiden (2007) Grain size in Mg alloys: recrystallization and mechanical consequences, Materials science forum, vol. 558-559, pp. 433-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Atwell, Dale and Barnett, Matthew (2007) Extrudability of magnesium alloys, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 145-150, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
2005 School of Health and Social Development
Davis, Elise and Waters, Elizabeth (2005) Indicators of positive mental health for children : indicators of mental health, in Herrman, Helen; Saxena, Shekhar and Moodie, Rob (eds), Promoting mental health, concepts, emerging evidence, practice, pp. 159-160, World Health Organization, Geneva, Switzerland [D2]
2005 School of Engineering
Barnett, Matthew and Atwell, Dale (2005) Extrusion limits of some magnesium alloys in relation to AA6063, in Unknown (ed.), Proceedings of the 3rd Australasian - Pacific Aluminium Extrusion Conference., pp. 1-8, IMEA, North Melbourne, Vic. [E1]
Barnett, Matthew, Atwell, Dale, Davies, C.* and Schmidt, R.* (2005) Grain refinement of magnesium alloy ZM20 prior to and during extrusion, in Kaufmann, Helmut (eds), Proceedings of the 2nd International Light Metals Technology Conference 2005 : 8-10 June 2005, St. Wolfgang, Austria, pp. 161-166, ARC Leichtmetallkompetenzzentrum Ranshofen GMBH, Ranshofen, Austria [E2]
2004 School of Engineering
Barnett, Matthew, Atwell, Dale and Beer, Aiden (2004) Effect of grain size on the deformation and dynamic recrystallization of mg-3AI-1Zn, Materials science forum, vol. 467-470, pp. 435-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Barnett, Matthew, Beer, Aiden, Atwell, Dale and Oudin, Alexis (2004) Influence of grain size on hot working stresses and microstructures in Mg-3A1-1Zn, Scripta Materialia, vol. 51, no. 1, pp. 19-24, Pergamon, Tarrytown, NY [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-2342483153
Citation counts:Barnett, Matthew, Keshavarz, Zohreh, Beer, Aiden and Atwell, Dale (2004) Influence of grain size on the compressive deformation of wrought Mg-3A1-1Zn, Acta Materialia, vol. 52, no. 17, pp. 5093-5103, Elsevier Science, Tarrytown, NY ; Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-4644370586
Citation counts:2003 School of Engineering
Atwell, Dale and Barnett, Matthew (2003) Grain size effect on load limited extrusion of AZ31, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003, pp. 361-363, CAST, Brisbane, Qld [E1]
Grants and Consultancies
No grants and/or consultancies found or audited – the 2012 HERDC financial return has not been completed or loaded as yet.
Higher Degree by Research Completions supervised by Dale Atwell
No completions found or audited.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Thursday 23rd May 2013 10:04pm
