Research Services Division

Deakin Research

Research Output for Dale Atwell

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2013 Institute for Frontier Materials

Stanford, Nicole and Atwell, Dale (2013) The effect of Mn-rich precipitates on the strength of AZ31 extrudates, Metallurgical and materials transactions A, vol. 44, no. 10, pp. 4830-4843, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84878390134
DRO entry for this publication

2012 Institute for Frontier Materials

Atwell, D.L., Barnett, M.R. and Hutchinson, W.B. (2012) The effect of initial grain size and temperature on the tensile properties of magnesium alloy AZ31 sheet, Materials science and engineering A, vol. 549, pp. 1-6, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84861346952
Citation counts: Scopus - 10, Thomson - 10
DRO entry for this publication

2010 Institute for Frontier Materials

Stanford, Nicole, Atwell, Dale and Barnett, Matthew R. (2010) The effect of Gd on the recrystallisation, texture and deformation behaviour of magnesium-based alloys, Acta materialia, vol. 58, no. 20, pp. 6773-6783, Elsevier BV, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-77957980680
Citation counts: Scopus - 50, Thomson - 42
DRO entry for this publication

Barnett, M. R., Beer, A., Atwell, D., Davies, C. H. J.* and Abbott, T.* (2010) Exploiting low levels of rare earth addition in Mg extrusion alloys, in Agnew, Sean R.; Neelameggham, Neale R.; Nyberg, Eric A. and Sillekens, Wim H. (eds), Magnesium Technology 2010 : Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS), pp. 353-357, The Minerals, Metals & Materials Society (TMS), Warrendale, Pa. [E1]
DRO entry for this publication

2009 Institute for Frontier Materials

Hilditch, Tim, Atwell, Dale, Easton, Mark* and Barnett, Matthew Robert (2009) Performance of wrought aluminium and magnesium alloy tubes in three-point bending, Materials and design, vol. 30, no. 7, pp. 2316-2322, Elsevier, Oxford, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-67349091160
Citation counts: Scopus - 14, Thomson - 11
DRO entry for this publication

Hilditch, Tim, Atwell, Dale and Beer, Aiden G. (2009) Effect of grain size on the performance of extruded magnesium alloy tubes in three-point bending, Materials science forum, vol. 618-619, pp. 523-526, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Stanford, Nicole, Atwell, Dale, Beer, Aiden, Davies, C.* and Barnett, Matthew (2008) Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys, Scripta materialia, vol. 59, no. 7, pp. 772-775, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-47749116833
Citation counts: Scopus - 92, Thomson - 80
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Atwell, Dale and Barnett, Matthew (2007) Extrusion limits of magnesium alloys, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 38, no. 12, pp. 3032-3041, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-36448964474
Citation counts: Scopus - 25, Thomson - 17
DRO entry for this publication

Barnett, Matthew, Atwell, Dale and Beer, Aiden (2007) Grain size in Mg alloys: recrystallization and mechanical consequences, Materials science forum, vol. 558-559, pp. 433-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 7
DRO entry for this publication

Atwell, Dale and Barnett, Matthew (2007) Extrudability of magnesium alloys, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 145-150, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
DRO entry for this publication

2005 School of Engineering

Barnett, Matthew and Atwell, Dale (2005) Extrusion limits of some magnesium alloys in relation to AA6063, in Unknown (ed.), Proceedings of the 3rd Australasian - Pacific Aluminium Extrusion Conference., pp. 1-8, IMEA, North Melbourne, Vic. [E1]
DRO entry for this publication

Barnett, Matthew, Atwell, Dale, Davies, C.* and Schmidt, R.* (2005) Grain refinement of magnesium alloy ZM20 prior to and during extrusion, in Kaufmann, Helmut (eds), Proceedings of the 2nd International Light Metals Technology Conference 2005 : 8-10 June 2005, St. Wolfgang, Austria, pp. 161-166, ARC Leichtmetallkompetenzzentrum Ranshofen GMBH, Ranshofen, Austria [E2]
DRO entry for this publication

2004 School of Engineering

Barnett, Matthew, Atwell, Dale and Beer, Aiden (2004) Effect of grain size on the deformation and dynamic recrystallization of mg-3AI-1Zn, Materials science forum, vol. 467-470, pp. 435-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 13
DRO entry for this publication

Barnett, Matthew, Beer, Aiden, Atwell, Dale and Oudin, Alexis (2004) Influence of grain size on hot working stresses and microstructures in Mg-3A1-1Zn, Scripta Materialia, vol. 51, no. 1, pp. 19-24, Pergamon, Tarrytown, NY [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-2342483153
Citation counts: Scopus - 69
DRO entry for this publication

Barnett, Matthew, Keshavarz, Zohreh, Beer, Aiden and Atwell, Dale (2004) Influence of grain size on the compressive deformation of wrought Mg-3A1-1Zn, Acta Materialia, vol. 52, no. 17, pp. 5093-5103, Elsevier Science, Tarrytown, NY ; Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-4644370586
Citation counts: Scopus - 510
DRO entry for this publication

2003 School of Engineering

Atwell, Dale and Barnett, Matthew (2003) Grain size effect on load limited extrusion of AZ31, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003, pp. 361-363, CAST, Brisbane, Qld [E1]
DRO entry for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Dale Atwell

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Saturday 20th December 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011