Research Services Division

Deakin Research

Research Output for Bantwal Baliga

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2004 External

Walsh, A.P., Baliga, B.* and Hodgson, Peter (2004) Force modelling of the crankshaft pin grinding process., Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, vol. 218, no. 3, pp. 219-228, Professional Engineering Publishing, London, England [C1]
ERA journal ID: 3648 – Scopus EID: 2-s2.0-8644266772
Citation counts: Scopus - 7
DRO entry for this publication

2000 School of Engineering

Mandal, P. and Baliga, B. (2000) MIS-user interface design for job shop manufacturing environment, International Journal of Operations & Production Management, vol. 0, no. 0, pp. 468-480, MCB University Press, West Yorkshire, England [C1]
ERA journal ID: 19334 – Scopus EID: Not tagged
no DRO entry yet for this publication

Baliga, B. and Mandal, P. (2000) Systems Approach to Off-Round Grinding, in G. Altmann, J. Lamp, P. Love, P. Mandal, R. Smith and M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 77-82, Deakin University, Geelong, Victoria [E1]
no DRO entry yet for this publication

Kong, L., Nahavandi, S., Baliga, B. and Kouzani, A. (2000) Application of Image Processing in Analysing HPDC Thermal Images, in Xu Guan hua (ed.), Journal of Image and Graphics: Proceedings of ICIG' 2000, pp. 269-272, Publishing Board of JIG, Beijing, China [E1]
no DRO entry yet for this publication

Kong, L., Nahavandi, S. and Baliga, B. (2000) PARAMETRICAL INVESTIGATION OF HIGH PRESSURE DIE CASTING PROCESS, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, pp. 1-5, Causal Productions/Institution of Engineers Australia, Sydney, Australia [E1]
no DRO entry yet for this publication

Baliga, B., Nahavandi, S. and Kong, L. (2000) CYCLE TIME REDUCTION IN HIGH PRESSURE DIE CASTING, 2000 Pacific Conference on Manufacturing, pp. 500-505, Lawrence Technological University, USA [E2]
no DRO entry yet for this publication

Kong, L., Nahavandi, S. and Baliga, B. (2000) Identification of Critical Processing Parameters of High Pressure Die Casting Process Using Artificial Neural Networks, in K.S.Taraman (ed.), 2000 Pacific Conference on Manufacturing, pp. 493-498, Lawrence Technological University, USA [E2]
no DRO entry yet for this publication

Kong, L., Nahavandi, S. and Baliga, B. (2000) Defect analysis of high pressure die castings with artificial intelligence technology, in n/a (ed.), 2000 Pacific Conference on Manufacturing, pp. 506-511, Lawrence Technological University, USA [E2]
no DRO entry yet for this publication

1999 School of Engineering

Baliga, B., Hodgson, P. and Doyle, E.* (1999) Effect of contact length in off-round grinding., in J. Wang, W. Scott and L. Zhang (eds), ABTEC 99, pp. 116-123, World Scientific Publishing Co, Singapore [E1]
no DRO entry yet for this publication

Baliga, B., Hodgson, P. and Doyle, E.* (1999) Analysis of Punch Grinding Tools,, Tooling 99, pp. 7-11, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Wong, K., Ferguson, C., Florance, J., Baliga, B. and Jones, T. (1999) Flexible Delivery of Practical Learning Experience Through the Internet : The Remotely Operated CNC Machine Teaching Project, Forum of the Open and Distance Learning Association of Australia., pp. 523-531, Deakin University, Australia [E2]
no DRO entry yet for this publication

1998 School of Engineering

Baliga, B., Doyle, E.* and Thompson, W.* (1998) Computer Simulation for Punch Grinding, Transactions of Mechanical Engineers, vol. 0, no. 0 [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Baliga, B., Doyle, E.*, Hodgson, P. and Wang, B. (1998) Punch Grinding Torque Analysis, "Proceedings of the International Conference on Theoretical, Applied, Computational and Experimental Mechanics", Indian Institute of Technology, "Kharagpur, India" [E1]
no DRO entry yet for this publication

Wang, B., Bathgate, R. and Baliga, B. (1998) Dynamic Plastic Response of a Stepped Cantilever Under a Striking Tip Load, "International Conference on Theoretical, Applied, Computational and Experimental Mechanics", "Institute of Technology, India", India [E1]
no DRO entry yet for this publication

Wang, B., Baliga, B. and Yang, M.* (1998) On the Impact Damping Effect of Bean Bags, "International Conference on Theoretical, Applied, Computational and Experimental Mechanics", "Institute of Technology, India", Kharagpur [E1]
no DRO entry yet for this publication

Baliga, B., Doyle, E.* and Hodgson, P. (1998) Thermal Modelling of Punch Grinding, Materials '98, pp. 227-232, "Inst of Materials Eng, Australasia Ltd", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

1997 School of Engineering

Baliga, B. and Doyle, D.* (1997) Mechanics of Material Removal in Puch Grinding, World Congress Manufacturing TechnologyTowards 2000, pp. 715-721, IEAUST, Queensland [E1]
no DRO entry yet for this publication

1996 School of Engineering

Baliga, B. and Palmer, S. (1996) Use of the Internet for Flexible Delivery and Enhancement of Teaching and Learning, Proceedings of the 8th Annual and Convention and Conference of the Australasian Association for Engineering Education, pp. 201-205, USICEE, Victoria [E1]
no DRO entry yet for this publication

Baliga, B. and Wong, K. (1996) The Delivery of a Flexible Manufacturing System Unit through Distributed Hypermedia for Distance Teaching, Internat. Conference on Education in Engineering: Manufacturing Education for the 21st Centrury (Vol. III) - Preparing World Class Manufacturing Professionals, pp. 349-352, Society of Manufacturing Engineers, Michigan, USA [E1]
no DRO entry yet for this publication

1995 School of Engineering

Baliga, B., Doyle, E.* and Thompson, W.* (1995) An Analysis of Punch Grinding, "The Sixth International Conference on Manufacturing Engineering: "Manufacturing: A Global Perspective". Proceedings. Volume 2", pp. 727-732, Institution of Engineers (Australia), Melbourne, Australia [E1]
no DRO entry yet for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Bantwal Baliga

2002

Hin Piu Chau
Doctor of Technology, Thesis entitled: Relationship between Advanced Manufacturing Technologies (AMTs) and Workforce Development Activities.
School of Engineering Requires an Internet connection

2001

John Cherian
Doctor of Technology, Thesis entitled: Industrial and Economic Development: A Holistic Study of Brunei Darussalam.
School of Engineering Requires an Internet connection

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Tuesday 22nd July 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011