Research Services Division

Deakin Research

Research Output for Matthew Barnett

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2014 Institute for Frontier Materials

Hu, Xiaokai, Mayson, Dylan and Barnett, Matthew R. (2014) Synthesis of Mg2Si for thermoelectric applications using magnesium alloy and spark plasma sintering, Journal of alloys and compounds, vol. 589, pp. 485-490, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-84891618750
Citation counts: Scopus - 2
DRO entry for this publication

2013 Institute for Frontier Materials

Barnett, Matthew (2013) Forming of magnesium and its alloys, in Pekguleryuz, Mihriban o.; Kainer, Karl U. and Kaya, Arslan A. (eds), Fundamentals of magnesium alloy metallurgy, pp. 197-226, Woodhead, Cambridge, England [B1]
DRO entry for this publication

Hutchinson, Bevis* and Barnett, Matthew (2013) Plastic anisotropy in magnesium alloys : phenomena and modeling, in Molodov, Dmitri A. (eds), Microstructural design of advanced engineering materials, pp. 91-118, Wiley, Weinheim, Germany [B1]
DRO entry for this publication

Barnett, Matthew, Setty, Mohan and Siska, Filip (2013) Estimating critical stresses required for twin growth in a magnesium alloy, Metallurgical and materials transactions A, vol. 44, no. 7, pp. 2962-2969, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84870603691
Citation counts: Thomson - 1
DRO entry for this publication

Barnett, Matthew R., Stanford, Nicole, Ghaderi, Alireza and Siska, Filip (2013) Plastic relaxation of the internal stress induced by twinning, Acta materialia, vol. 61, no. 20, pp. 7859-7867, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84885167859
DRO entry for this publication

Ghaderi, Alireza, Hodgson, Peter D. and Barnett, Matthew R. (2013) Microstructure and texture development in Ti-5Al-5Mo- 5V-3Cr alloy during cold rolling and annealing, Key engineering materials, vol. 551, pp. 210-216, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84880124595
DRO entry for this publication

Ghaderi, A., Siska, F. and Barnett, M.R. (2013) Influence of temperature and plastic relaxation on tensile twinning in a magnesium alloy, Scripta materialia, vol. 69, no. 7, pp. 521-524, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84881480855
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Jain, J., Cizek, P., Poole, W.J.* and Barnett, M.R. (2013) Precipitate characteristics and their effect on the prismatic-slip-dominated deformation behaviour of an Mg–6 Zn alloy, Acta materialia, vol. 61, no. 11, pp. 4091-4102, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84877729749
Citation counts: Scopus - 2
DRO entry for this publication

Ross, N.G.*, Barnett, M.R. and Beer, A.G. (2013) Compositional effects on the restoration behaviour in Mg-Zn-Re alloys, Materials science forum, vol. 765, pp. 18-22, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Siska, Filip, Ramajayam, Mahendra, Fabijanic, Daniel and Barnett, Matthew (2013) Internal material 'architecture' for a kink-resistant metal tube, Acta materialia, vol. 61, no. 1, pp. 331-340, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84869092100
DRO entry for this publication

Stanford, Nicole, Terbush, Jessica R.*, Setty, Mohan and Barnett, Matthew R. (2013) Grain refinement of an extruded Mg alloy via na microalloying, Metallurgical and materials transactions A, vol. 44, no. 6, pp. 2466-2469, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84877086874
Citation counts: Scopus - 2
DRO entry for this publication

Stanford, N. and Barnett, M. R. (2013) Solute strengthening of prismatic slip, basal slip and {1 0 1 2} twinning in Mg and Mg–Zn binary alloys, International journal of plasticity, vol. 47, no. August, pp. 165-181, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4909 – Scopus EID: 2-s2.0-84879084518
Citation counts: Scopus - 10, Thomson - 8
DRO entry for this publication

Stevenson, Paul G., Conlan, Xavier A. and Barnett, Neil W. (2013) Evaluation of the asymmetric least squares baseline algorithm through the accuracy of statistical peak moments, Journal of chromatography A, vol. 1284, pp. 107-111, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1641 – Scopus EID: 2-s2.0-84874992980
Citation counts: Scopus - 4
DRO entry for this publication

Terbush, Jessica R.*, Stanford, Nicole, Nie, Jian-Feng* and Barnett, Matthew R. (2013) Na partitioning during thermomechanical processing of an Mg-Sn-Zn-Na alloy, Metallurgical and materials transactions A, vol. 44, no. 11, pp. 5216-5225, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84885428331
Citation counts: Scopus - 1
DRO entry for this publication

2012 Institute for Frontier Materials

Atwell, D.L., Barnett, M.R. and Hutchinson, W.B. (2012) The effect of initial grain size and temperature on the tensile properties of magnesium alloy AZ31 sheet, Materials science and engineering A, vol. 549, pp. 1-6, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84861346952
Citation counts: Scopus - 7, Thomson - 7
DRO entry for this publication

Barnett, Matthew R., Nave, Mark D. and Ghaderi, Alireza (2012) Yield point elongation due to twinning in a magnesium alloy, Acta materialia, vol. 60, no. 4, pp. 1433-1443, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84856116770
Citation counts: Scopus - 33, Thomson - 26
DRO entry for this publication

Beyerlein, I. J.*, Wang, J.*, Barnett, M. R. and Tome, C. N.* (2012) Double twinning mechanisms in magnesium alloys via dissociation of lattice dislocations, Proceedings of the royal society A: Mathematical, physical and engineering sciences, vol. 468, no. 2141, pp. 1496-1520, Royal Society Publishing, London, England [C1]
ERA journal ID: 39856 – Scopus EID: 2-s2.0-84861839250
Citation counts: Scopus - 18, Thomson - 18
DRO entry for this publication

Cizek, P., Sankaran, A.*, Rauchc, E. F.* and Barnett, M. R. (2012) Observation of (sub)grain clusters in the as-deposited and in situ annealed nanocrystalline nickel using automated crystal orientation mapping, Scripta materialia, vol. 67, no. 7-8, pp. 685-688, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84865470322
DRO entry for this publication

Hutchinson, B.*, Jain, J. and Barnett, M. R. (2012) A minimum parameter approach to crystal plasticity modelling, Acta materialia, vol. 60, no. 15, pp. 5391-5398, Elsevier, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84864517514
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Ochanda, Fredrick O., Rajukada, Sitarama and Barnett, Matthew R. (2012) Controlled synthesis of TiO2 hierarchical nanofibre structures via electrospinning and solvothermal processes : photocatalytic activity for degradation of methylene blue, Nanomaterials and nanotechnology, vol. 2, pp. 1-10, InTech, Rijeka, Croatia [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Robson, Joseph D.*, Stanford, Nicole and Barnett, Matthew R. (2012) Effect of precipitate shape and habit on mechanical asymmetry in magnesium alloys, Metallurgical and materials transactions A, pp. 1-12, Springer, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84867366535
Citation counts: Thomson - 2
DRO entry for this publication

Sankaran, A., Vadakke Madam, S., Nouri, A.* and Barnett, M. R. (2012) Attaining high compressive strains in pure Mg at room temperature by encasing with pure Al, Scripta materialia, vol. 66, no. 10, pp. 725-728, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84858701958
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Stanford, N., Geng, J.*, Chun, Y. B.*, Davies, C. H. J.*, Nie, J. F.* and Barnett, M. R. (2012) Effect of plate-shaped particle distributions on the deformation behaviour of magnesium alloy AZ91 in tension and compression, Acta materialia, vol. 60, no. 1, pp. 218-228, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-80054989866
Citation counts: Scopus - 21
DRO entry for this publication

Stanford, N., Taylor, A. S., Cizek, P., Siska, F., Ramajayam, M. and Barnett, M. R. (2012) {1012} Twinning in magnesium-based lamellar microstructures, Scripta materialia, vol. 67, no. 7-8, pp. 704-707, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84865518002
Citation counts: Scopus - 2
DRO entry for this publication

Zhang, Zhen, Cizek, Pavel and Barnett, Matthew (2012) A critical test of twin-induced softening in a magnesium alloy extruded to a strain of 0.7 at room temperature, Scripta materialia, vol. 67, no. 12, pp. 1015-1018, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84868193848
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Stanford, N. and Barnett, M.R. (2012) Effect of Zn concentration and grain size on prismatic slip in Mg-Zn binary alloys, in Mathaudhu, Suveen N.; Sillekens, Wim H.; Neelameggham, Neale R and Hort, Norbert (eds), Magnesium technology 2012 : Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS), pp. 207-211, TMS, Orlando, Fl. [E1]
DRO entry for this publication

Barnett, Matthew (2012) A physically based phenomenological model for deformation twinning in magnesium alloy, in Unknown (ed.), TMS 2012 : Supplemental Proceedings for the Magnesium Technology Annual Meeting and Exhibition, p. 1, The Conference, Orlando, Fla. [E3.1]
DRO entry for this publication

Robson, Joseph*, Stanford, Nicole and Barnett, Matthew (2012) Effect of particle shape and habit on twinning in magnesium alloy, in Unknown (ed.), TMS 2012 : Supplemental Proceedings for the Magnesium Technology Annual Meeting and Exhibition, p. 274, The Conference, Orlando, FL. [E3.1]
DRO entry for this publication

2011 GTP Operations

Chun, Y. B.*, Geng, J.*, Stanford, N., Davies, C. H. J.*, Nie, J. F.* and Barnett, M. R. (2011) Processing and properties of Mg-6Gd-1Zn-0.6Zr: Part 1 - recrystallisation and texture development, Materials science and engineering a, vol. 528, no. 10-11, pp. 3653-3658, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79952282996
Citation counts: Scopus - 10, Thomson - 8
DRO entry for this publication

Geng, J.*, Chun, Y. B.*, Stanford, N., Davies, C. H. J.*, Nie, J. F.* and Barnett, M. R. (2011) Processing and properties of Mg-6Gd-1Zn-0.6Zr. Part 2 - mechanical properties and particle twin interactions, Materials science and engineering a, vol. 528, no. 10-11, pp. 3659-3665, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79952282577
Citation counts: Scopus - 16, Thomson - 15
DRO entry for this publication

2011 Institute for Frontier Materials

Cizek, P., Barnett, M. R., Nave, M. D., Rauch, E. F.* and Balasubramaniam, R.* (2011) Microscale and mesoscale crystallographic textures of nanocrystalline ni-based electrodeposits, Metallurgical and materials transactions A – physical metallurgy and materials science, vol. 42, no. 7, pp. 2048-2060, Springer, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-79958862585
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Delannay, Laurent* and Barnett, Matthew R (2011) Modelling the combined effect of grain size and grain shape on plastic anisotropy of metals, International journal of plasticity, vol. 32-33, pp. 70-84, Pergamon, London, England [C1]
ERA journal ID: 4909 – Scopus EID: 2-s2.0-84857920230
Citation counts: Scopus - 8, Thomson - 6
DRO entry for this publication

Ghaderi, Alireza and Barnett, Matthew R. (2011) Sensitivity of deformation twinning to grain size in titanium and magnesium, Acta materialia, vol. 59, no. 20, pp. 7824-7839, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-80054716563
Citation counts: Scopus - 32, Thomson - 27
DRO entry for this publication

Robson, J. D.*, Stanford, N. and Barnett, M. R. (2011) Effect of precipitate shape on slip and twinning in magnesium alloys, Acta materialia, vol. 59, no. 5, pp. 1945-1956, Elsevier, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-79551511732
Citation counts: Scopus - 48, Thomson - 43
DRO entry for this publication

Stanford, N., Sha, G.*, Xia, J. H.*, Ringer, S. P.* and Barnett, M. R. (2011) Solute segregation and texture modification in an extruded magnesium alloy containing gadolinium, Scripta materialia, vol. 65, no. 10, pp. 919-921, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-80053242700
Citation counts: Scopus - 22, Thomson - 20
DRO entry for this publication

Barnett, M. R., Stanford, N., Geng, J.* and Robson, J.* (2011) On the impact of second phase particles on twinning in magnesium alloys, in Sillekens, Wim H.; Agnew, Sean R.; Neelameggham, Neale R. and Mathaudhu, Suveen N. (eds), TMS 2011 : Magnesium Technology 2011 : Proceedings of the Magnesium Technology Symposium, pp. 289-293, John Wiley & Sons, Hoboken, N. J. [E1]
DRO entry for this publication

2010 School of Engineering

Muránsky, O.*, Barnett, M. R., Carr, D. G.*, Vogel, S.* and Oliver, E. C.* (2010) Combined in situ neutron diffraction and acoustic emission of twin nucleation & twin growth in extruded ZM20 Mg alloy, Materials science forum, vol. 652, pp. 149-154, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2010 Institute for Frontier Materials

Barnett, M. R., Sullivan, A., Stanford, N., Ross, N. and Beer, A. (2010) Texture selection mechanisms in uniaxially extruded magnesium alloys, Scripta materialia, vol. 63, no. 7, pp. 721-724, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-77955559195
Citation counts: Scopus - 21, Thomson - 21
DRO entry for this publication

Hutchinson, W. B. and Barnett, M. R. (2010) Effective values of critical resolved shear stress for slip in polycrystalline magnesium and other hcp metals, Scripta materialia, vol. 63, no. 7, pp. 737-740, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-77955554829
Citation counts: Scopus - 63, Thomson - 57
DRO entry for this publication

Muransky, O.*, Barnett, M. R., Luzin, V.* and Vogel, S. C.* (2010) On the correlation between deformation twinning and Luders-like deformation in an extruded Mg alloy: In situ neutron diffraction and EPSC.4 modelling, Materials science and engineering A : structural materials : properties, microstructures and processing, vol. 527, no. 6, pp. 1383-1394, Elsevier, Basel, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-75149149158
Citation counts: Scopus - 23, Thomson - 21
DRO entry for this publication

Muransky, O.*, Barnett, M. R., Carr, D. G.*, Vogel, S. C.* and Oliver, E. C.* (2010) Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 mg alloy : combined in situ neutron diffraction and acoustic emission, Acta materialia, vol. 58, no. 5, pp. 1503-1517, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-74549117292
Citation counts: Scopus - 48, Thomson - 42
DRO entry for this publication

Ochanda, Fredrick O. and Barnett, Matthew R. (2010) Synthesis and characterization of silver nanoparticles and titanium oxide nanofibers : toward multifibrous nanocomposites, Journal of the american ceramic society, vol. 93, no. 9, pp. 2637-2643, Wiley-Blackwell Publishing, Malden, Mass. [C1]
ERA journal ID: 4948 – Scopus EID: 2-s2.0-77956381408
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Robson, J. D.*, Stanford, N. and Barnett, M. R. (2010) Effect of particles in promoting twin nucleation in a Mg-5 wt.% Zn alloy, Scripta materialia, vol. 63, no. 8, pp. 823-826, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-77955516300
Citation counts: Scopus - 25, Thomson - 22
DRO entry for this publication

Sankaran, A., Bouzy, E.*, Barnett, M. and Hazotte, A.* (2010) Grain boundary-dependent selection criteria for nucleation of gamma-massive grains in TiAl-based alloys, Materials science forum, vol. 654-656, pp. 2338-2341, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Stanford, Nicole, Atwell, Dale and Barnett, Matthew R. (2010) The effect of Gd on the recrystallisation, texture and deformation behaviour of magnesium-based alloys, Acta materialia, vol. 58, no. 20, pp. 6773-6783, Elsevier BV, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-77957980680
Citation counts: Scopus - 46, Thomson - 38
DRO entry for this publication

Stanford, N., Sabirov, I.*, Sha, G.*, La Fontaine, A.*, Ringer, S. P.* and Barnett, M. R. (2010) Effect of Al and Gd solutes on the strain rate sensitivity of magnesium alloys, Metallurgical and materials transactions A – physical metallurgy and materials science, vol. 41, no. 3, pp. 734-743, Springer, New York, N. Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-77949307270
Citation counts: Scopus - 17, Thomson - 15
DRO entry for this publication

Barnett, M. R., Beer, A., Atwell, D., Davies, C. H. J.* and Abbott, T.* (2010) Exploiting low levels of rare earth addition in Mg extrusion alloys, in Agnew, Sean R.; Neelameggham, Neale R.; Nyberg, Eric A. and Sillekens, Wim H. (eds), Magnesium Technology 2010 : Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS), pp. 353-357, The Minerals, Metals & Materials Society (TMS), Warrendale, Pa. [E1]
DRO entry for this publication

2009 Institute for Frontier Materials

Barnett, Matthew R. (2009) The Challenge of inhomogeneous deformation in magnesium and its alloys, Materials science forum, vol. 618-619, pp. 227-232, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Barnett, Matthew R., Ghaderi, Alireza, Sabirov, Ilchat and Hutchinson, Bevis* (2009) Role of grain boundary sliding in the anisotropy of magnesium alloys, Scripta materialia, vol. 61, no. 3, pp. 277-280, Pergamon, Kidlington, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-65549095970
Citation counts: Scopus - 20, Thomson - 20
DRO entry for this publication

Barnett, M.R., Cizek, P., Nave, M., Sullivan, A. and Balasubramaniam, R.* (2009) Cobblestone mesotexture in a nanocrystalline Ni–20Fe electrodeposit, Scripta materialia, vol. 60, no. 8, pp. 603-606, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-60549086095
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Barnett, M.R., Balasubramaniam, R*, Kumar, Vinod* and MacRae, Colin* (2009) Correlation between microstructure and phosphorus segregation in a hypereutectoid Wootz steel, Journal of materials science, vol. 44, no. 9, pp. 2192-2197, Springer, New York, N.Y. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-64949149359
Citation counts: Scopus - 3, Thomson - 4
DRO entry for this publication

Barnett, M.R., Stanford, N., Cizek, P., Beer, A., Xuebin, Z. and Keshavarz, Z. (2009) Deformation mechanisms in mg alloys and the challenge of extending room-temperature Plasticity, JOM: The journal of the minerals, metals and materials society (TMS), vol. 61, no. 8, pp. 19-24, Springer, New York, N.Y. [C1]
ERA journal ID: 4030 – Scopus EID: 2-s2.0-70449564739
Citation counts: Scopus - 20
DRO entry for this publication

Barnett, M. R., Sullivan, A. and Balasubramaniam, R.* (2009) Electron backscattering diffraction analysis of an ancient wootz steel blade from central India, Materials characterization, vol. 60, no. 4, pp. 252-260, Elsevier, New York, N.Y. [C1]
ERA journal ID: 4805 – Scopus EID: 2-s2.0-60949097786
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Beer, A. G. and Barnett, M. R. (2009) The post-deformation recrystallization behaviour of magnesium alloy Mg–3Al–1Zn, Scripta materialia, vol. 61, no. 12, pp. 1097-1100, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-70349759483
Citation counts: Scopus - 11, Thomson - 11
DRO entry for this publication

Hilditch, Tim, Atwell, Dale, Easton, Mark* and Barnett, Matthew Robert (2009) Performance of wrought aluminium and magnesium alloy tubes in three-point bending, Materials and design, vol. 30, no. 7, pp. 2316-2322, Elsevier, Oxford, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-67349091160
Citation counts: Scopus - 14, Thomson - 11
DRO entry for this publication

Hutchinson, Bevis*, Barnett, Matthew R., Ghaderi, Alireza, Cizek, Pavel and Sabirov, Ilchat (2009) Deformation modes and anisotropy in magnesium alloy AZ31, International journal of materials research, vol. 100, no. 4, pp. 556-563, Carl Hanser Verlag GmbH, Munich, Germany [C1]
ERA journal ID: 123994 – Scopus EID: 2-s2.0-65549118316
Citation counts: Scopus - 18, Thomson - 16
DRO entry for this publication

Kashyap, B. P.*, Hodgson, P. D., Estrin, Y.*, Timokhina, I., Barnett, M. R. and Sabirov, I.* (2009) Plastic flow properties and microstructural evolution in an ultrafine-grained Al-Mg-Si alloy at elevated temperatures, Metallurgical and materials transactions A – physical metallurgy and materials science, vol. 40, no. 13, pp. 3294-3303, Springer, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-72149093237
Citation counts: Scopus - 13, Thomson - 12
DRO entry for this publication

Kolahi, A.*, Akbarzadeh, A.* and Barnett, M.R. (2009) Electron back scattered diffraction (EBSD) characterization of warm rolled and accumulative roll bonding (ARB) processed ferrite, Journal of materials processing technology, vol. 209, no. 3, pp. 1436-1444, Elsevier, Basel, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-57949106906
Citation counts: Scopus - 10, Thomson - 10
DRO entry for this publication

Lapovok, Rimma*, Tomus, D.*, Skripnyuk, V.M.*, Barnett, Matthew and Gibson, M.A.* (2009) The effect of hydrogenation on the ECAP compaction of Ti–6Al–4V powder and the mechanical properties of compacts, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 513-514, pp. 97-108, Elsevier, Basel, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-65349111267
Citation counts: Scopus - 16, Thomson - 16
DRO entry for this publication

Lapovok, Rimma*, Tomus, Dacian*, Barnett, Matthew Robert and Gibson, Mark A.* (2009) Use of residual hydrogen to produce CP-Ti powder compacts for low temperature rolling, International journal of materials research, vol. 100, no. 12, pp. 1727-1738, Carl Hanser Verlag GmbH, Munich, Germany [C1]
ERA journal ID: 123994 – Scopus EID: 2-s2.0-77952651122
Citation counts: Scopus - 3
DRO entry for this publication

Malet, L.*, Barnett, M. R., Jacques, P. J.* and Godet, S.* (2009) Variant selection during the c-to-ab phase transformation in hot-rolled bainitic TRIP-aided steels, Scripta materialia, vol. 61, no. 5, pp. 520-523, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-67549132005
Citation counts: Scopus - 10, Thomson - 8
DRO entry for this publication

Sabirov, I.*, Barnett, M.R., Estrin, Y.* and Hodgson, P.D. (2009) The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy, Scripta materialia, vol. 61, no. 2, pp. 181-184, Pergamon, Kidlington. England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-65449166035
Citation counts: Scopus - 24, Thomson - 22
DRO entry for this publication

Sabirov, Ilchat*, Barnett, Matthew Robert, Estrin, Yuri*, Timokhina, Ilana and Hodgson, Peter (2009) Deformation mechanisms in an ultra-fine grained Al alloy, International journal of materials research, vol. 100, no. 12, pp. 1679-1685, Carl Hanser Verlag GmbH, Munich, Germany [C1]
ERA journal ID: 123994 – Scopus EID: 2-s2.0-77952633134
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Stanford, N. and Barnett, M.R. (2009) Effect of particles on the formation of deformation twins in a magnesium-based alloy, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 516, no. 1-2, pp. 226-234, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-67649811416
Citation counts: Scopus - 60, Thomson - 56
DRO entry for this publication

Stanford, N., Sha, G.*, La Fontaine, A.*, Barnett, M.R. and Ringer, S.P.* (2009) Atom probe tomography of solute distributions in mg-based alloys, Metallurgical and materials transactions a : physical metallurgy and materials science, vol. 40, no. 10, pp. 2480-2487, Springer, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-69949133364
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Sullivan, A. and Barnett, M.R. (2009) Electron backscattering diffraction analysis of a reconstructed wootz damascus steel blade, Microscopy and microanalysis, vol. 15, no. Supplement 2, pp. 1496-1497, Cambridge University Press, Cambridge, England [C1]
ERA journal ID: 1117 – Scopus EID: 2-s2.0-69949177559
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Barnett, Matthew Robert, Davies, Christopher Huw John* and Beer, Aiden Graeme (2009) Wrought magnesium alloy, Wrought magnesium alloy, Cast CRC Limited; BARNETT, Matthew Robert ; Davies, Christopher Huw John ; Beer, Aiden Graeme, Other international (5) [I]
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Barnett, Matthew, Keshavarz, Zohreh, Beer, Aiden and Ma, Xiang (2008) Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy, Acta materialia, vol. 56, no. 1, pp. 5-15, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-36249029905
Citation counts: Scopus - 115
DRO entry for this publication

Barnett, M., Jacob, S., Gerard, B.* and Mullins, J. (2008) Necking and failure at low strains in a coarse-grained wrought Mg alloy, Scripta materialia, vol. 59, no. 10, pp. 1035-1038, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-51349154109
Citation counts: Scopus - 19, Thomson - 19
DRO entry for this publication

Barnett, M. (2008) A rationale for the strong dependence of mechanical twinning on grain size, Scripta Materialia, vol. 59, no. 7, pp. 696-698, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-47749150621
Citation counts: Scopus - 104, Thomson - 91
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2008) Microstructure evolution in hot worked and Annealed Magnesium Alloy AZ31, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 485, no. 1-2, pp. 318-324, Elsevier SA, Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42149136304
Citation counts: Scopus - 43, Thomson - 36
DRO entry for this publication

Cizek, P. and Barnett, M. (2008) Characteristics of the contraction twins formed close to the fracture surface in Mg-3A1-1Zn alloy deformed in tension, Scripta Materialia, vol. 59, no. 9, pp. 959-962, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-49949115100
Citation counts: Scopus - 45, Thomson - 42
DRO entry for this publication

Dehghan-Manshadi, Ali*, Jonas, John J.*, Hodgson, Peter and Barnett, Mathew (2008) Correlation between the deformation and post-deformation softening behaviours in hot worked Austenite, ISIJ International, vol. 48, no. 2, pp. 208-211, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-42349090027
Citation counts: Scopus - 5, Thomson - 3
DRO entry for this publication

Dehghan-Manshadi, A.*, Barnett, M. and Hodgson, P. (2008) Hot deformation and recrystallization of austenitic stainless steel: part 1. dynamic recrystallization, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 6, pp. 1359-1370, Springer, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-43149111820
Citation counts: Scopus - 64, Thomson - 49
DRO entry for this publication

Dehghan-Manshadi, A.*, Barnett, M. and Hodgson, P. (2008) Hot deformation and recrystallization of austenitic stainless steel: Part 11. post-deformation recrystallization, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 6, pp. 1371-1381, Springer, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-43449092857
Citation counts: Scopus - 17, Thomson - 12
DRO entry for this publication

Dehghan-Manshadi, A., Barnett, M. and Hodgson, P. (2008) Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 485, no. 1-2, pp. 664-672, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42149162933
Citation counts: Scopus - 85, Thomson - 62
DRO entry for this publication

Easton, Mark*, Beer, Aiden, Barnett, Matthew, Davies, Chris*, Dunlop, Gordon*, Durandet, Yvonne*, Blacket, Stuart*, Hilditch, Tim and Beggs, Peter* (2008) Magnesium alloy applications in automotive structures, Journal of metals, vol. 60, no. 11, pp. 57-62, Springer, Warrendale, Pa. [C1]
ERA journal ID: 4030 – Scopus EID: 2-s2.0-56249139705
Citation counts: Scopus - 60
DRO entry for this publication

Ma, Xiang and Barnett, Matthew (2008) Influences of steady and cyclic die rotation on the compression of aluminium, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 483-484, pp. 444-447, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-41849096027
Citation counts: Thomson - 1
DRO entry for this publication

Muransky, O.*, Carr, D.*, Barnett, M., Oliver, E.* and Sittner, P.* (2008) Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: in situ neutron diffraction and EPSC modelling, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 496, no. 1-2, pp. 14-24, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-51949101437
Citation counts: Scopus - 44, Thomson - 42
DRO entry for this publication

Oudin, A., Hodgson, P.D. and Barnett, M.R. (2008) EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region, Materials science and engineering. A. Structural materials : properties, microstructures and processing, vol. 486, no. 1, pp. 72-79, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42949178650
Citation counts: Scopus - 10, Thomson - 6
DRO entry for this publication

Sabirov, Ilchat, Estrin, Yuri*, Barnett, Matthew R., Timokhina, Ilana B.* and Hodgson, Peter (2008) Deformation behaviour of an ultra-fine grained Al6082 alloy, Materials science forum, vol. 584 - 586, pp. 703-707, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Sabirov, I., Estrin, Y.*, Barnett, M., Timokhina, I.* and Hodgson, P. (2008) Tensile deformation of a ultrafine-grained aluminium alloy: micro shear banding and grain boundary sliding, Acta Materialia, vol. 56, no. 10, pp. 2223-2230, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-43449108255
Citation counts: Scopus - 52, Thomson - 43
DRO entry for this publication

Sabirov, I., Estrin, Y.*, Barnett, M., Timokhina, I.* and Hodgson, P. (2008) Enhanced tensile ductility of an ultra-fine-grained aluminium alloy, Scripta Materialia, vol. 58, no. 3, pp. 163-166, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-36049034351
Citation counts: Scopus - 36, Thomson - 31
DRO entry for this publication

Safi-Naqvi, S.H.*, Hutchinson, W.B.* and Barnett, M.R. (2008) Texture and mechanical anisotropy in three extruded magnesium alloys, Materials science and technology, vol. 24, no. 10, pp. 1283-1292, Maney, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10, Thomson - 10
DRO entry for this publication

Stanford, Nicole and Barnett, Matthew (2008) Effect of composition on the texture and deformation behaviour of wrought Mg alloys, Scripta materialia, vol. 58, no. 3, pp. 179-182, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-36049010735
Citation counts: Scopus - 113, Thomson - 100
DRO entry for this publication

Stanford, Nicole, Atwell, Dale, Beer, Aiden, Davies, C.* and Barnett, Matthew (2008) Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys, Scripta materialia, vol. 59, no. 7, pp. 772-775, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-47749116833
Citation counts: Scopus - 80, Thomson - 73
DRO entry for this publication

Stanford, N., Carlson, U. and Barnett, M. (2008) Deformation twinning and the hall-petch relation in commercial purity ti, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 4, pp. 933-944, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-40549130050
Citation counts: Scopus - 20, Thomson - 18
DRO entry for this publication

Stanford, Nicole and Barnett, Matthew (2008) Fine grained AZ31 produced by conventional thermo-mechanical processing, Journal of alloys and compounds, vol. 466, no. 1-2, pp. 182-188, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-50649116353
Citation counts: Scopus - 34, Thomson - 27
DRO entry for this publication

Stanford, N. and Barnett, M. (2008) The origin of "Rare Earth" texture development in extruded Mg-based alloys and its effect on tensile ductility, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 496, no. 1-2, pp. 399-408, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-51749119225
Citation counts: Scopus - 182, Thomson - 163
DRO entry for this publication

Barnett, M. R. and Cizek, P. (2008) Identification and rationalization of secondary twin variants in a magnesium alloy, in Rollett, A.D Tony; Adams,Brent; Barmak, Katayun and Bieler, Thomas (eds), ICOTOM 2008 : Proceedings of the 15th International Conference on Textures of Materials (ICOTOM 15), pp. 1-10, Wiley, Hoboken, N.J. [E1]
DRO entry for this publication

Barnett, M. R., Arhatari, B.*, Stanford, N., Beer, A. G., Keshavarz, Z. and Ma, X. (2008) Some issues relating to the ductility of wrought magnesium alloys, in Pekguleryuz, Mihriban O.; Neelameggham, Neale R.; Beals, Randy S. and Nyberg, Eric A (eds), TMS 2008: Linking Science and Technology for Global Solutions : TMS 2008 Annual Meeting and Exhibition, pp. 85-88, Minerals, Metals and Materials Society, Warrendale, Pa. [E1]
DRO entry for this publication

Ghaderi, A., Sabirov, I. and Barnett, M. R. (2008) Effect of grain size on deformation twinning behaviour of high MN steel, in Wanjara, P. and Elwazri, A.M. (eds), Recent Developments in Advanced High Strength Steels Processing: Proceedings of the 47th Conference of Metallurgists (COM2008), pp. 71-81, Canadian Institute of Mining, Metallurgical and Petroleum, Montréal, Canada [E1]
DRO entry for this publication

Sabirov, Ilchat, Timokhina, Ilana, Barnett, Matthew and Hodgson, Peter (2008) The microstructure evolution and mechanical properties of cryorolled Al alloys, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal Forming 2008 : Proceedings of the 12th International Conference on Metal Forming, pp. 190-194, Verlag Stahleisen GmbH, Duesseldorf, Germany [E2.1]
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Atwell, Dale and Barnett, Matthew (2007) Extrusion limits of magnesium alloys, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 38, no. 12, pp. 3032-3041, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-36448964474
Citation counts: Scopus - 23, Thomson - 17
DRO entry for this publication

Barnett, Matthew (2007) A practical condition for migration dynamic recrystallization, Acta materialia, vol. 55, no. 9, pp. 3271-3278, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-34247167736
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Barnett, Matthew and Stanford, Nicole (2007) Influence of microstructure on strain distribution in Mg–3Al–1Zn, Scripta materialia, vol. 57, no. 12, pp. 1125-1128, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-34548852862
Citation counts: Scopus - 20, Thomson - 18
DRO entry for this publication

Barnett, Matthew and Balasubramanian, R.* (2007) New insights on the mechanism of carbide banding in thermomechanically processed Wootz Steel obtained using electron back scattering diffraction, Indian journal of history of science, vol. 42, no. 4, pp. 633-648, Indian National Science Academy, New Delhi, India [C1]
ERA journal ID: 11338 – Scopus EID: Not tagged
DRO entry for this publication

Barnett, Matthew, Atwell, Dale and Beer, Aiden (2007) Grain size in Mg alloys: recrystallization and mechanical consequences, Materials science forum, vol. 558-559, pp. 433-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 5
DRO entry for this publication

Barnett, Matthew and Beer, Aiden (2007) A criterion for conventional dynamic recrystallization: Application to magnesium alloys, Materials science forum, vol. 550, pp. 369-374, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Barnett, Matthew (2007) Twinning and the ductility of magnesium alloys Part II. “Contraction” twins, Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 464, no. 1-2, pp. 8-16, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34248582379
Citation counts: Scopus - 268, Thomson - 236
DRO entry for this publication

Barnett, Matthew (2007) Twinning and the ductility of magnesium alloys Part I: “Tension” twins, Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 464, no. 1-2, pp. 1-7, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34248531236
Citation counts: Scopus - 319, Thomson - 276
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2007) Microstructural development during hot working of Mg-3AI-1Zn, Metallurgical and materials transactions A-physical metallurgy and materials science, vol. 38A, no. 8, pp. 1856-1867, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-34547547741
Citation counts: Scopus - 59, Thomson - 52
DRO entry for this publication

Beladi, Hossein and Barnett, Matthew (2007) Influence of aging pre-treatment on the compressive deformation of WE54 alloy, Materials science and engineering A: structural materials; properties, microstructures and processing, vol. 452-453, pp. 306-312, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-33847298521
Citation counts: Scopus - 15, Thomson - 15
DRO entry for this publication

Dehghan-Manshadi, A., Barnett, Matthew and Hodgson, Peter (2007) Microstructural evolution during hot deformation of duplex stainless steel, Materials science and technology, vol. 23, no. 12, pp. 1478-1484, Maney Publishing, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 20, Thomson - 11
DRO entry for this publication

Easton, Mark*, Davies, Chris*, Barnett, Matthew and Pravdic, Franka* (2007) Effect of solidification grain refinement on the development of wrought Mg alloys, Materials science forum, vol. 539, no. 543, pp. 1729-1734, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 5
DRO entry for this publication

Kumar, Vinod*, Barnett, Matthew, Balasubramanian, R.* and Jaikishan, S.* (2007) Microstructural characterization along the length of a wedge shaped Wootz Steel implement, Indian journal of history of science, vol. 42, no. 4, pp. 609-631, Indian National Science Academy, New Delhi, India [C1]
ERA journal ID: 11338 – Scopus EID: Not tagged
DRO entry for this publication

Atwell, Dale and Barnett, Matthew (2007) Extrudability of magnesium alloys, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 145-150, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
DRO entry for this publication

Barnett, Matthew (2007) Twinning and ductile failure of Mg-3Al-1Zn, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 29-32, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2007) The microstructural evolution in hot worked and annealed magnesium alloys, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 427-432, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
DRO entry for this publication

Easton, Mark*, Dunlop, Gordon*, Abbott, Trevor*, Gibson, Mark*, Bettles, Colleen*, Davies, Chris*, Barnett, Matthew and Beer, Aiden (2007) Mg alloy research in the CAST co-operative research centre, Workshop on Advanced Magnesium Alloys and their Applications, pp. 8-11, Shanghai Jiao Tong University, Shanghai, China [EN]
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Barnett, Matthew, Keshavarz, Zohreh and Ma, Xiang (2006) A semianalytical Sachs model for the flow stress of a magnesium alloy, Metallurgical and materials transactions A, vol. 37, no. 7, pp. 2283-2293, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-33746050742
Citation counts: Scopus - 50, Thomson - 44
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2006) Influence of initial microstructure on the hot working flow stress of Mg–3A1–1Zn, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 423, no. 1-2, pp. 292-299, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-33748204677
Citation counts: Scopus - 66
DRO entry for this publication

Keshavarz, Zohreh and Barnett, Matthew (2006) EBSD analysis of deformation modes in Mg-3A1-1Zn, Scripta materialia, vol. 55, no. 10, pp. 915-918, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-33748329514
Citation counts: Scopus - 95, Thomson - 87
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2006) Microstructural evolution during the annealing of hot worked magnesium alloy AZ31, in Unknown (ed.), Interfacial phenomena in fine particle technology : proceedings of the sixth UBC-McGill-UA International Symposium on Fundamentals in Mineral Processing in honor of professor Janusz S. Laskowski,, pp. 147-156, Canadian Institute of Mining, Metallurgy and Petroleum, Montréal, QC [E1]
DRO entry for this publication

Wen, Cui'e, Barnett, Matthew, Vella, J. and Yamada, Y.* (2006) Solid-state foaming of magnesium alloys, in Kanetake, Naoyuki and Nakajima, Hideo (eds), Porous Metals and Metal Foaming Technology: 4th International Conference on Porous Metals and Metal Foaming Technology (METFOAM2005), pp. 165-168, Japan Institute of Metals, Kyoto, Japan [E1]
DRO entry for this publication

Barnett, Matthew (2006) Ductile failure of magnesium AZ31 : twinning when the c-axis is compressed, in Kainer, Karl U. (eds), Magnesium : proceedings of the 7th International Conference Magnesium Alloys and their Applications, pp. 571-574, Wiley-VCH Verlag, Berlin, Germany [E2]
DRO entry for this publication

Keshavarz, Z. and Barnett, M. R. (2006) Slip during tension testing of Mg-3A1-1Zn sheet, in Kainer, Karl U. (eds), Magnesium : proceedings of the 7th International Conference Magnesium Alloys and their Applications, pp. 588-593, Wiley-VCH Verlag, Berlin, Germany [E2.1]
DRO entry for this publication

2005 School of Engineering

Barnett, Matthew, Davies, C. H. J.* and Ma, Xiang (2005) An analytical constitutive law for twinning dominated flow in magnesium, Scripta materialia, vol. 52, no. 7, pp. 627-632, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-12344329693
Citation counts: Scopus - 50
DRO entry for this publication

Barnett, Matthew, Keshavarz, Zohreh and Nave, Mark (2005) Microstructural features of rolled mg-3Al-1Zn, Metallurgical and materials transactions A, vol. 36A, no. 7, pp. 1697-1704, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-23644458560
Citation counts: Scopus - 32
DRO entry for this publication

Barnett, Matthew (2005) Texture, twinning and uniform elongation of wrought magnesium, Materials science forum, vol. 495-497, pp. 1079-1084, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2005) The influence of twinning on the hot working flow stress and microstructural evolution of magnesium alloy AZ31, Materials Science Forum, vol. 488, no. 489, pp. 611-614, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Beladi, Hossein, Hodgson, Peter and Barnett, Matthew (2005) Mapping the hot deformation microstructure of Ni-30Fe alloy, ISIJ international, vol. 45, no. 12, pp. 1893-1896, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-33344471187
Citation counts: Scopus - 5
DRO entry for this publication

Cartmill, M., Barnett, Matthew, Zahiri, S.* and Hodgson, Peter (2005) An analysis of the transition between strain dependent and independent softening in austenite, ISIJ international, vol. 45, no. 12, pp. 1903-1908, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-33244470179
Citation counts: Scopus - 15, Thomson - 14
DRO entry for this publication

Hodgson, Peter, Beladi, Hossein and Barnett, Matthew (2005) Grain refinement in steels through thermomechanical processing, Materials science forum, vol. 500, no. 501, pp. 39-48, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 6
DRO entry for this publication

Keshavarz, Zohreh and Barnett, Matthew (2005) Observation of deformation modes in Mg-3Al-1Zn, Materials forum, vol. 29, pp. 382-386, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Nave, Mark and Barnett, Matthew (2005) Understanding the deformed microstructure of cold-rolled IF and LC steel, Materials forum, vol. 29, pp. 562-567, Institute of Materials Engineering Australasia, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Barnett, Matthew and Atwell, Dale (2005) Extrusion limits of some magnesium alloys in relation to AA6063, in Unknown (ed.), Proceedings of the 3rd Australasian - Pacific Aluminium Extrusion Conference., pp. 1-8, IMEA, North Melbourne, Vic. [E1]
DRO entry for this publication

Jacobs, Simon and Barnett, Matthew (2005) Influence of grain size on the low temperature formability of AZ31B sheet, in Martin, J-P. (eds), Light Metals 2005: proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada, pp. 151-161, Canadian Institute of Mining (CIM), Montreal, Quebec [E1]
DRO entry for this publication

Keshavarz, Zoreh and Barnett, Matthew (2005) In-situ investigation of twinning behaviour in Mg-3Al-1Zn, in Neelameggham, N. R.; Kaplan, H. I. and Powell, B. R. (eds), Magnesium technology 2005 : proceedings of the symposium, pp. 171-175, TMS, Warrendale, Pa. [E1]
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Davies, C.H.J.* (2005) Modelling the influence of strain on the yield surface of magnesium, in Banabic, Dorel (eds), Proceedings of the 8th ESAFORM Conference on Material Forming, pp. 395-398, Publishing House of the Romanian Academy, Bucharest, Romania [E1]
DRO entry for this publication

Ma, X and Barnett, Matthew (2005) An upper bound analysis of forward extrusion through rotating dies, in Banabic, Dorel (eds), Proceedings of the 8th ESAFORM Conference on Material Forming, pp. 565-568, Publishing House of the Romanian Academy, Bucharest, Romania [E1]
DRO entry for this publication

Barnett, Matthew, Atwell, Dale, Davies, C.* and Schmidt, R.* (2005) Grain refinement of magnesium alloy ZM20 prior to and during extrusion, in Kaufmann, Helmut (eds), Proceedings of the 2nd International Light Metals Technology Conference 2005 : 8-10 June 2005, St. Wolfgang, Austria, pp. 161-166, ARC Leichtmetallkompetenzzentrum Ranshofen GMBH, Ranshofen, Austria [E2]
DRO entry for this publication

2004 School of Engineering

Backx, Petra*, Barnett, Matthew and Kestens, Leo* (2004) Texture changes during uniaxial compression of Mg-3AI-1Zn, Materials science forum, vol. 467-470, pp. 429-434, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Barnett, Matthew, Beer, Aiden, Atwell, Dale and Oudin, Alexis (2004) Influence of grain size on hot working stresses and microstructures in Mg-3A1-1Zn, Scripta Materialia, vol. 51, no. 1, pp. 19-24, Pergamon, Tarrytown, NY [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-2342483153
Citation counts: Scopus - 67
DRO entry for this publication

Barnett, Matthew, Keshavarz, Zohreh, Beer, Aiden and Atwell, Dale (2004) Influence of grain size on the compressive deformation of wrought Mg-3A1-1Zn, Acta Materialia, vol. 52, no. 17, pp. 5093-5103, Elsevier Science, Tarrytown, NY ; Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-4644370586
Citation counts: Scopus - 484
DRO entry for this publication

Barnett, Matthew, Ma, Xiang and Oudin, Alexis (2004) Generating misorientations in shear deformation structures, Materials transactions (JIM), vol. 45, no. 7, pp. 2151-2156, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-4544303268
DRO entry for this publication

Barnett, Matthew, Nave, Mark and Bettles, C. J.* (2004) Deformation microstructures and textures of some cold rolled Mg alloys, Materials science and engineering A: structural materials : properties, microstuctures and processing, vol. 386, no. 1-2, pp. 205-211, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-5744227425
Citation counts: Scopus - 276
DRO entry for this publication

Barnett, Matthew, Atwell, Dale and Beer, Aiden (2004) Effect of grain size on the deformation and dynamic recrystallization of mg-3AI-1Zn, Materials science forum, vol. 467-470, pp. 435-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 12
DRO entry for this publication

Davies, Chris* and Barnett, Matthew (2004) Expanding the extrusion limits of wrought magnesium alloys, JOM: the journal of the minerals, metals & materials society, vol. 56, no. 5, pp. 22-24, TMS - The Minerals, Metals and Materials Society, Warrendale, Pa. [C1]
ERA journal ID: 4030 – Scopus EID: 2-s2.0-3042529768
Citation counts: Scopus - 16
DRO entry for this publication

Dehghan-Manshadi, A., Beladi, Hossein, Barnett, Matthew and Hodgson, Peter (2004) Recrystallization in 304 austenitic stainless steel, Materials science forum, vol. 467, no. 470, pp. 1163-1168, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 15
DRO entry for this publication

Ebrahimi, R.*, Oudin, A., Najafi-Zadeh, A.*, Barnett, Matthew and Hodgson, Peter (2004) Static recrystallization of Ti-IF steel after warm deformation, Materials science forum, vol. 467, no. 470, pp. 251-256, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Lapovok, R.*, Barnett, Matthew and Davies, C. H. J.* (2004) Construction of extrusion limit diagram for AZ31 magnesium alloy by FE simulation, Journal of materials processing technology, vol. 146, no. 3, pp. 408-414, Elsevier SA, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-1242320977
Citation counts: Scopus - 58, Thomson - 42
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Friction changes during compression tests using tool rotation technique, Key engineering materials, vol. 274, no. 276, pp. 895-900, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-33646252032
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Forward extrusion through steadily rotating conical dies. Part II: theoretical analysis, International journal of mechanical sciences, a cooperative research centre for cast, metals manufacturing, vol. 46, no. 3, pp. 465-489, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-2942668418
Citation counts: Scopus - 15
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Forward extrusion through steadily rotating conical dies. Part I: experiments, International journal of mechanical sciences, vol. 46, no. 3, pp. 449-464, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-2942707864
Citation counts: Scopus - 25
DRO entry for this publication

Nave, Mark, Barnett, Matthew and Beladi, Hossein (2004) The influence of solute carbon in cold-rolled steels on shear band formation and recrystallization texture, ISIJ international, vol. 44, no. 6, pp. 1072-1078, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-4344614533
Citation counts: Scopus - 13
DRO entry for this publication

Nave, Mark and Barnett, Matthew (2004) Fragmentation of orientation within grains of a cold-rolled interstitial-free steel, ISIJ international, vol. 44, no. 1, pp. 187-196, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-1842866351
Citation counts: Scopus - 13, Thomson - 9
DRO entry for this publication

Nave, Mark and Barnett, Matthew (2004) Texture change near grain boundaries and triple points in cold-rolled interstitial-free steel, Materials science and engineering A, vol. 386, pp. 244-253, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-6344221947
Citation counts: Scopus - 12
DRO entry for this publication

Nave, Mark and Barnett, Matthew (2004) Microstructures and textures of pure magnesium deformed in plane-strain compression, Scripta materialia, vol. 51, no. 9, pp. 881-885, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-4344568184
Citation counts: Scopus - 226
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2004) Grain size effect on the warm deformation behaviour of a Ti-IF steel, Materials science & engineering A. Structural materials : properties, microstructure and processing, vol. 367, no. 1-2, pp. 282-294, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0942278159
Citation counts: Scopus - 30
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Stress analysis of compression of aluminium with rotating tools, in Nie, J. F.; Morton, A. J. and Muddle, B. C. (eds), Aluminium alloys : their physical and mechanical properties : proceedings of the 9th International Conference on aluminium alloys (ICAA9), pp. 1123-1127, IMEA, North Melbourne, Vic. [E1]
DRO entry for this publication

Nave, M. and Barnett, Matthew (2004) Characterisation of deformed microstructures using field-emission gun scanning electron microscopy (FEG-SEM) and electron backscatter diffraction (EBSD), in Crameri, S.; Horne, M.D.; Hyatt, A.D.; Lucas, L.; Marshall, A.T.; McCulloch, D.G.; Miller, P.R.; Spargo, A.; Van Driel, R.; Veitch, C.; Walker, M. and Ward, J.V. (eds), ACMM18 : Microscopy by the Bay, p. 43, Australian Microscopy and Microanalysis Society, Canberra, A.C.T. [L3]
DRO entry for this publication

2003 School of Engineering

Barnett, Matthew (2003) Quenched and annealed microstructures of hot worked magnesium AZ31, Materials transactions, vol. 44, no. 4, pp. 571-577, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-0037530195
Citation counts: Scopus - 36
DRO entry for this publication

Barnett, Matthew (2003) Hot working microstructure map for magnesium AZ31, Materials Science Forum, vol. 426-432, pp. 515-520, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 11
DRO entry for this publication

Barnett, Matthew (2003) A Taylor Model Based Description of the proof stress of magnesium AZ31 during hot working, Metallurgical and materials transactions A, vol. 34, no. 9, pp. 1799-1806, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0141519677
Citation counts: Scopus - 90, Thomson - 76
DRO entry for this publication

Barnett, Matthew (2003) Recrystallization during and following hot working of magnesium alloy AZ31, Materials science forum, vol. 419, no. 422, pp. 503-508, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 30
DRO entry for this publication

Kim, Y. H.*, Ma, Xiang, Hodgson, Peter and Barnett, Matthew (2003) Multi equal channel angular pressing with rotational dies, Materials science forum, vol. 426, no. 432, pp. 2777-2782, Trans Tech Publications, Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2003) Experimental and theoretical investigation of compression of a cylinder using a rotating platen, International journal of mechanical sciences, vol. 45, no. 10, pp. 1717-1737, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-1342281096
Citation counts: Scopus - 3
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2003) Grain size effect on behaviour and microstructure of a warm deformed Ti-IF steel, Materials science forum, vol. 426, no. 432, pp. 1279-1284, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Verbeken, K.*, Nave, Mark, Kestens, L.* and Barnett, Matthew (2003) Selective growth in a scratched Fe-2.8%Si single crystal, Materials science forum, vol. 426-432, pp. 3757-3762, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Atwell, Dale and Barnett, Matthew (2003) Grain size effect on load limited extrusion of AZ31, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003, pp. 361-363, CAST, Brisbane, Qld [E1]
DRO entry for this publication

Barnett, Matthew (2003) Hot working magnesium AZ31, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure and Control: Conference Proceedings, pp. 56-62, University of Sheffield, Dept. of Engineering Materials, Sheffield, England [E1]
DRO entry for this publication

Barnett, Matthew, Yao, J.* and Davies, C.* (2003) Extrusion limits for AZ alloys with Al contents <3%, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003, pp. 333-338, CAST, Brisbane, Qld [E1]
DRO entry for this publication

Hodgson, Peter, Barnett, Matthew, Beladi, Hossein and Kelly, Georgina (2003) The production of ultrafine grained steels by thermomechanical processing, in Palmiere, E. J.; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 170-175, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Ma, X., Barnett, M. R. and Kim, Y. H.* (2003) Deformation behaviour of a cylinder under simultaneous compression and torsion, in Zhang, L.C. and Lu, G (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002), pp. 767-772, Trans Tech Publications, Uetikon-Zuerich, Switzerland [E1]
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2003) Influence of grain size on the deformation behaviour of a TiIF Steel, in Takechi, H. (eds), IF steels 2003 : international forum for the properties and application of IF steels, pp. 329-336, Iron and Steel Institute of Japan, Tokyo, Japan [E2]
DRO entry for this publication

Qian, Ma*, St John, David*, Frost, Malcom* and Barnett, Matthew (2003) Grain refinement of pure magnesium using rolled Zirmax® master alloy (MG-33.3ZR), in Kaplan, Howard I. (eds), Magnesium technology 2003 : proceedings of the jointly sponsored by the Magnesium Committee of the Light Metals Division (LMD) and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (the Minerals, Metals & Materials, TMS, Warrendale, Pa. [E2]
DRO entry for this publication

2002 School of Engineering

Barnett, Matthew and Montheillet, F.* (2002) The generation of new high-angle boundaries in aluminium during hot torsion, Acta materialia, vol. 50, no. 9, pp. 2285-2296, Elsevier Science, New York, N.Y. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-0037165884
Citation counts: Scopus - 58
DRO entry for this publication

Barnett, Matthew, Kelly, Georgina and Hodgson, Peter (2002) Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 33A, no. 7, pp. 1893-1900, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036650051
Citation counts: Scopus - 14
DRO entry for this publication

Hoggan, E. J., Scott, R. I., Barnett, Matthew and Hodgson, Peter (2002) Mechanical properties of tension levelled and skin passed steels, Journal of materials processing technology, vol. 125-126, pp. 155-163, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047815
Citation counts: Scopus - 7
DRO entry for this publication

Nave, Mark and Barnett, Matthew (2002) Recrystallization textures in course grained low carbon and interstitial free steels, Materials science forum, vol. 408-412, pp. 907-912, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2002) The hot flow stress and microstructure in magnesium AZ31, in Kaplan, Howard (eds), Magnesium technology 2002 : proceedings of the symposium jointly sponsored by the Magnesium Committee of the Light Metals Division (LMD) of TMS (THe Minerals, Metals & Materials Society) with the International Magnesium Association : held during the 2002, pp. 193-198, TMS, Warrendale, Pa. [E1]
DRO entry for this publication

2001 School of Engineering

Barnett, Matthew (2001) Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ31, Journal of light metals, vol. 1, no. 3, pp. 167-177, Elsevier Science, New York, N.Y. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 176
DRO entry for this publication

Barnett, Matthew and Hodgson, Peter (2001) Metal forming (hot) : microstructural aspects, in Buschow , K. H. Jürgen; Cahn , Robert W.; Flemings , Merton C.; Ilschner , Bernard; Kramer , Edward J.; Mahajan , Subhash and Veyssière , Patrick (eds), Encyclopedia of materials : science and technology, pp. 5417-5424, Elsevier, Amsterdam, The Netherlands [D2]
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2001) The hot deformation of wrought magnesium alloy AZ31, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 87-92, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kong, Lingxue (2001) Slab analysis of cyclic torsional extrusion, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 38-43, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Mills, S., Barnett, Matthew and Brownrigg, Allan (2001) Effect of drawing and cross section hardness on surface strain path during compression, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : proceedings, pp. 75-80, The Institute, North Melbourne, Vic. [E1]
DRO entry for this publication

Vlahovic, S., Savage, S., Barnett, Matthew and Hodgson, Peter (2001) Warm net forging in the production environment, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 69-74, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Barnett, M.R and Montheillet, F.* (2001) The generation of new high angle boundaries during the hot torsional deformation of aluminium, in Gottstein, Gunter and Molodov, Dmitri (eds), Recrystallization and Grain Growth. Proceedings of the 1st Joint International Conference., pp. 869-874, Springer-Verlag, Aachen, Germany [E2]
Citation counts: Thomson - 56
DRO entry for this publication

Fabijanic, D., Miller, C., Barnett, M., Cardew-Hall, M.*, Haynes, D.* and Hodgson, P. (2001) Investigation of tool finish direction and lubrication in the forming of cylindrical cups, in Duflou, J.R. (eds), SheMet 2001 : Proceedings of the 9th International Conference on Sheet Metal, pp. 101-108, Heverlee, Katholieke Universiteit Leuven, Departement Werktuigkunde, Leuven, Belgium [E2]
DRO entry for this publication

Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Formation mechanism of inner-wall fold in thick lead tube under axial compression with fixed ends, in Wong, Joseph (eds), Proceedings of the Worley Australasian Finite Element Conference : the Windsor, Melbourne, Australia : 22-23 February 2001, pp. 140-149, Worley Limited, Melbourne, Vic. [E2]
DRO entry for this publication

Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Numerical simulation of forward extrusion with cyclic die rotation, in Meech, John A. (eds), IPMM-2001: the Third International Conference on Intelligent Processing and Manufacturing of Materials and Manufacturing of Materials 3rd International Conference, pp. 1-11, CRC Press, Boca Raton, Fla. [E2]
DRO entry for this publication

2000 School of Engineering

Barnett, M. and Kestens, L.* (2000) STRENGTHENING THE {111} TEXTURE IN STEEL SHEET BY INCREASING THE LEVEL OF SOLUTE CARBON DURING COLD ROLLING, Textures and Microstructures, vol. 0, no. 0, pp. 1-22, Gordon and Breach Publishing, Lausanne [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Barnett, M. (2000) Improving the r-value of Warm Rolled and Annealed Low Carbon Steel by Adding Chromium, Steel Research, vol. 0, no. 0, pp. 295-302, Verlag Stahleisen, Germany [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Barnett, M., Kelly, G. and Hodgson, P. (2000) PREDICTING THE CRITICAL STRAIN FOR DYNAMIC RECRYSTALLIZATION USING THE KINETICS OF STATIC RECRYSTALLIZATION, Scripta Materialia, vol. 0, no. 0, pp. 365-369, Elsevier Science, Oxford [C1]
ERA journal ID: 4837 – Scopus EID: Not tagged
no DRO entry yet for this publication

Hodgson, P., Kelly, G. and Barnett, M. (2000) Recent Trends in the Thermomechanical Processing of Steel, Materials Forum: Materials and Processes of the 21st Century, vol. 0, no. 0, pp. 37-48, Institute of Materials Engineering Australasia Ltd, North Melbourne, Victoria, Australia [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Ma, X., Wang, B.*, Kong, L. and Barnett, M. (2000) FEM Simulation of Torsion Tests for Pre-Deformed Lead with Work-Softening, Key Engineering Materials, vol. 0, no. 0, pp. 407-412, Trans Tech Publications, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: Not tagged
no DRO entry yet for this publication

Fabijanic, D., Barnett, M., Hodgson, P. and Cardew-Hall, M.* (2000) Improving the Galling resistance of automotive stamping tools, in M. Pietrzyk, J. Kusiak and J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 641-646, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Hodgson, P. and Barnett, M. (2000) The thermomechanical processing of steels - Current status and future trends, in M. Pietrzyk, J. Kusiak and J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 21-28, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Savage, S., Barnett, M. and Hodgson, P. (2000) Investigation into cold heading lubricants, in M. Pietrzyk, J. Kusiak & J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 569-575, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Barnett, M., Kelly, G. and Hodgson, P. (2000) Predictions of Dynamic Recrystallization in Aluminium Based on Static Recrystallization Data, in J. Kazadi and J. Masounave (eds), 39th Annual Conference of Metallurgists of CIMProceedings of the International Symposium on Light Metals, pp. 439-452, Canadian Institute of Mining, Metallurgy and Petro, Canada [E2]
no DRO entry yet for this publication

Barnett, M. (2000) Shear Bands and Recrystallization Textures in Steel, in S. Yue and E. Es-sadiqi (eds), 39th Annual Conference of Metallurgists of CIM. J.J. Jonas Symposium on Thermomechanical Processing of Steel, pp. 265-277, Canadian Institute of Mining, Metallurgy and Petro, Canada [E2]
no DRO entry yet for this publication

1999 School of Engineering

Barnett, M. (1999) Some Distinctive Aspects of the Metallurgy of Warm Rolled Steel Strip, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999-Materials Processing., pp. 103-108, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Haynes, D., Barnett, M. and Hodgson, P. (1999) The Production of Zincanneal Coated Steels for Sheet Metal Forming, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999: Materials Processing, pp. 133-138, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Hickson, M., Hurley, P.*, Kelly, G., Hodgson, P. and Barnett, M. (1999) Formation of Ultra-Fine Grained Steels, Proceedings of the Second Symposium on Super Metal, pp. 203-213, JRCM, Tokyo, Japan [L2]
no DRO entry yet for this publication

1996 External

Barnett, M.*, Jonas, J.* and Hodgson, P. (1996) A Comparison Between the Recrystallization Behaviours of Warm and Cold Rolled Ferrite, "Proceedings of 37th MWSP Conference, ISS", pp. 971-978 [L1]
no DRO entry yet for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Muddle, B*, Hodgson, P, Schaffer, G*, Ferry, M*, Ringer, S*, Xia, K*, Nie, J*, Davies, C*, Hutchinson, C*, Barnett, M, Dahle, A*, Caceres, C*, Hoffman, M*, Dunlop, G*, Couper, M*, Embury, J*, Loretto, M*, Humphries, F*, Arnberg, L*, Estrin, Y*, Fraser, H* and Brechet, Y*. Design in Light Metals, ARC Centre - Centres of Excellence [T]

  • 2013: $631,733
  • 2012: $497,330
  • 2011: $497,330
  • 2010: $378,436
  • 2009: $548,803
  • 2008: $609,384

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet, ARC Collaborative - Linkage - Projects (Round 1), Linkage PhD student, Linkage PhD student [T]

  • 2013: $75,490
  • 2012: $103,848

Barnett, M. Growing a multi-scale internal structure: new wrought metals for energy conservation , ARC Fellowships - Future Fellowships [T]

  • 2013: $221,818
  • 2012: $214,024
  • 2011: $307,999

Barnett, M and Balasubramaniam, R*. Exploiting crystallographic texture for nano-crystalline metals, DIISR/AISRF Grant - AISRF/Indo-Australian Strategic Research Fund [T]

  • 2011: $7,947
  • 2010: $70,928

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $115,391
  • 2007: $113,125
  • 2006: $110,880
  • 2005: $122,452
  • 2004: $119,738

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology, Department of Innovation, Industry and Regional Development Grant - Centre of Excellence Project [T]

  • 2008: $139,333
  • 2007: $235,000

Barnett, M, Godet, S*, Yue, S* and Jonas, J*. Mechanisms for Improved Ductility of Magnesium Alloys, Australian Research Council Collaborative - Linkage - International [T]

  • 2008: $15,498
  • 2007: $15,000

Barnett, M and Muddle, B*. Design in Light Metals: Thermohydrogen Processing of titanium., Centres of Excellence, Australian Research Council, Centres of Excellence [T]

  • 2007: $91,461

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2006: $85,179
  • 2005: $78,367
  • 2004: $76,755

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Research Income - Other Public Sector Funding

Barnett, M and Balasubramaniam, R*. Exploiting crystallographic texture for nano-crystalline metals [U]

  • 2008: $71,040
  • 2007: $156,500

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology [U]

  • 2006: $125,667

Research Income - Industry and Other Funding

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V]

  • 2013: $25,000
  • 2012: $5,000

Fabijanic, D and Barnett, M. Nanostructured steels for ground engaging tools [V]

  • 2013: $12,500

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Research Income - Industry and Other Funding - Australian

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2006: $11,775
  • 2005: $46,489

Barnett, M and Rolfe, B. A multi-scale model of plasticity for magnesium alloys [V.1]

  • 2006: $5,000

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V.3]

  • 2013: $35,000
  • 2012: $35,000

Hodgson, P, Kong, L, Barnett, M and Rolfe, B. Cold Stamping of Advanced High Strength Steels [V.3]

  • 2013: $50,000
  • 2012: $50,000

Research Income - Other Funding Sources

Barnett, M. Wrought Magnesium Alloys Development, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2013: $28,255
  • 2012: $198,914
  • 2011: $277,100
  • 2010: $248,527
  • 2009: $282,986
  • 2008: $200,249
  • 2007: $84,094

Beer, A, Barnett, M and Sian, R. The Fatigue Behaviour of Cost Effective Magnesium and Titanium Alloys, CRC for Advanced Auto Technology - Scholarship, CRC for Advanced Auto Technology - Scholarship [X]

  • 2012: $23,168
  • 2011: $25,274
  • 2010: $26,356

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2010: $8,918
  • 2009: $21,800

Barnett, M. CAST Metals Manufacturing - A, CRC for CAST Metals Manufacturing [X]

  • 2006: $97,352

Higher Degree by Research Completions supervised by Matthew Barnett

2012

Nigel Ross
Doctor of Philosophy, Thesis entitled: Multistructural Development and Mechanical Properties in Wrought Mg-Zn-RE Alloys.
Institute for Frontier Materials Requires an Internet connection

2011

Alireza Ghaderi
Doctor of Philosophy, Thesis entitled: Influence of Grain Size on Twinning in Two HCP Metals.
Institute for Frontier Materials Requires an Internet connection

2008

Zohreh Keshavarz
Doctor of Philosophy, Thesis entitled: EBSD Analysis of Deformation Modes in MG-3A1-1Zn. Centre for Material and Fibre Innovation

Simon Jacob
Master of Engineering, Thesis entitled: Low Temperature Formability of Differently Processed AZ31B Magnesium Alloy Sheets. Centre for Material and Fibre Innovation

2007

Mark Cartmill
Doctor of Philosophy, Thesis entitled: Softening during the Hot Deformation of Steel. Centre for Material and Fibre Innovation

2006

Dale Atwell
Master of Engineering, Thesis entitled: Influence of Alloying Additions on the Extrudability of Magnesium. Centre for Material and Fibre Innovation

2005

Elisabeth Ackers
Doctor of Philosophy, Thesis entitled: Low Strain Processing of LC and ULC Steels.
School of Engineering Requires an Internet connection

2004

Aiden Beer
Doctor of Philosophy, Thesis entitled: The Evolution of Hot Working Stress and Microstructure in Mg-3A1-1Zn.
School of Engineering Requires an Internet connection

Stephen Vlahovic
Doctor of Philosophy, Thesis entitled: Fastener Manufacture by the Warm Forging Process.
School of Engineering Requires an Internet connection

2003

Xiang Ma
Doctor of Philosophy, Thesis entitled: Compression and Extrusion of Metals using Rotating Dies.
School of Engineering Requires an Internet connection

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Saturday 20th September 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011