Research Services Division

Deakin Research

Research Output for Richard E. Clegg

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Richard E. Clegg may be from another institution or only recently joined Deakin University.

Publications

2012 External

Ahsan, K.B.*, Mazid, A.M.*, Clegg, R.E.* and Pang, G.K.H.* (2012) Study on carbide cutting tool life using various cutting speeds for α-β Ti-alloy machining, Journal of achievements in materials and manufacturing engineering, vol. 55, no. 2, pp. 600-606, International OCSCO World Press, Gliwice, Poland [C1.1]
ERA journal ID: 124185 – Scopus EID: Not tagged
DRO entry for this publication

2011 External

Duan, Kai*, Beer, Aiden and Clegg, Richard E.* (2011) Effects of replication on measured S-N curves of metals, Advanced materials research, vol. 275, pp. 35-38, Trans Tech Publications, Lausanne, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79960420533
DRO entry for this publication

2010 External

Hasan, Md Shahanur*, Mazid, Abdul Md* and Clegg, Richard E.* (2010) Optimisation of the machining of Stellite 6 PTA hardfacing using surface roughness, in Unknown (ed.), Key engineering materials, vol. 443, pp. 227-231, Trans Tech Publications, Stafa-Zurich, Switzerland [C1.1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-77955458294
DRO entry for this publication

Duan, Kai*, Beer, Aiden and Clegg, Richard E.* (2010) Effects of replication on measured S-N curves of metals, in Unknown (ed.), SIF 2010 : Proceedings of the 2010 International Conference on Structural Integrity and Failure, Auckland, New Zealand, pp. 1-4, Trans Tech Publications, Zurich, Switzerland [E1.1]
DRO entry for this publication

Hasan, Md Shahanur*, Md, Mazid Abdul* and Clegg, Richard E.* (2010) Effect of cutting tool nose radius on surface roughness for stellite 6 machining using coated carbide insert, in Teh, Kian; Davies, Ian and Howard, Ian (eds), ACAM 2010 : Proceedings of the Applied Mechanics 2010 Australian Congress, pp. 603-612, Engineers Australia, Crows Nest, N.S.W. [E1.1]
DRO entry for this publication

Hasan, Md Shahanur*, Md, Mazid Abdul*, Clegg, Richard E.* and McLeod, Alan* (2010) Residual stress analysis on machined surface in turning Stellite 6, in Teh, Kian; Davies, Ian and Howard, Ian (eds), ACAM 2010 : Proceedings of the Applied Mechanics 2010 Australian Congress, pp. 714-722, Engineers Australia, Crows Nest, N.S.W. [E1.1]
DRO entry for this publication

Rashid, Abul Hasan Md. Mamunur*, Mazid, Abdul Md* and Clegg, Richard* (2010) Attrition assessment of alumina using single impact with variable air stream velocity, in Teh, Kian; Davies, Ian and Howard, Ian (eds), ACAM 2010 : Proceedings of the Applied Mechanics 2010 Australian Congress, pp. 333-339, Engineers Australia, Crows Nest, N.S.W. [E1.1]
DRO entry for this publication

2009 External

Mazid, Abdul Md*, Hasan, Md Shahanur* and Clegg, Richard* (2009) A rational between manufacturing processes design and manufacturing cost, in Unknown (ed.), AMPT 2009 : Forging a better future : Proceedings of the Advances in Materials and Processing Technologies 2009 conference, pp. 1-12, International Islamic University Malaysia, Kuala Lumpur, Malaysia [E1.1]
DRO entry for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Richard E. Clegg

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Saturday 20th December 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011