Research Services Division

Deakin Research

Research Output for Daniel Fabijanic

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2014 Institute for Frontier Materials

Kumar, Apurv, Hodgson, Peter, Gao, Weimin, Das, Subrat and Fabijanic, Dan (2014) Investigating the effect of segregation of particles and pressure gradient on the quality of fluidisation at sub-atmospheric pressures, Powder technology, vol. 254, pp. 137-149, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3918 – Scopus EID: 2-s2.0-84893106930
DRO entry for this publication

2013 Institute for Frontier Materials

Fabijanic, D., Taylor, A., Ralston, K.D.*, Zhang, M.X.* and Birbilis, N.* (2013) Influence of surface mechanical attrition treatment attrition media on the surface contamination and corrosion of magnesium, Corrosion, vol. 69, no. 6, pp. 527-535, NACE International, Houston, Tex. [C1]
ERA journal ID: 3734 – Scopus EID: 2-s2.0-84879762533
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Joseph, J. and Fabijanic, D.M. (2013) Characterization and tribological performance of Cu-based intermetallic layers, Key engineering materials, vol. 533, pp. 195-200, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84872512123
DRO entry for this publication

Kumar, Apurv, Das, Subrat, Fabijanic, Daniel, Gao, Weimin and Hodgson, Peter (2013) Bubble-wall interaction for asymmetric injection of jets in solid-gas fluidized bed, Chemical Engineering Science, vol. 101, no. 41537, pp. 56-68, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3858 – Scopus EID: 2-s2.0-84880297023
DRO entry for this publication

Pozo-Gonzalo, Cristina, Kartachova, Olga, Torriero, Angel A.J., Howlett, Patrick C., Glushenkov, Alexey M., Fabijanic, Daniel M., Chen, Ying, Poissonnet, Sylvie* and Forsyth, Maria (2013) Nanoporous transition metal oxynitrides as catalysts for the oxygen reduction reaction, Electrochimica acta, vol. 103, pp. 151-160, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1629 – Scopus EID: 2-s2.0-84879035074
Citation counts: Scopus - 2
DRO entry for this publication

Siska, Filip, Ramajayam, Mahendra, Fabijanic, Daniel and Barnett, Matthew (2013) Internal material 'architecture' for a kink-resistant metal tube, Acta materialia, vol. 61, no. 1, pp. 331-340, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84869092100
DRO entry for this publication

Spencer, K.*, Fabijanic, D.M. and Zhang, M.X.* (2013) The influence of Al2O3 reinforcement on the properties of stainless steel cold spray coatings, Surface & coatings technology, vol. 206, no. 14, pp. 3275-3282, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 5020 – Scopus EID: 2-s2.0-84862809566
Citation counts: Scopus - 10, Thomson - 7
DRO entry for this publication

Yang, D.K., Cizek, P., Fabijanic, D. and Hodgson, P.D. (2013) On the deformation mechanism of ultrafine-grained titanium with multilayered hierarchical structure, Materials science and engineering A, vol. 582, no. 41557, pp. 162-169, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84881248148
Citation counts: Scopus - 1
DRO entry for this publication

Yang, D. K., Cizek, P., Fabijanic, D., Wang, J. T. and Hodgson, P. D. (2013) Work hardening in ultrafine-grained titanium : multilayering and grading, Acta materialia, vol. 61, no. 8, pp. 2840-2852, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84875433694
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Yang, D.K., Wang, J.T., Fabijanic, D., Cizek, P., Li, B.S., Lu, J.Z.* and Hodgson, P.D. (2013) Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening, Materials science and engineering A, vol. 560, pp. 339-342, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84869089175
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Kumari, Apurv, Hodgson, Peter, Gao, Weimin, Fabijanic, Daniel and Das, Subrat (2013) Drag models comparison by single injection in vacuum fluidised beds, in Unknown (ed.), ICMF 2013 : Proceedings of the International Conference on Multiphase Flow, pp. 1-6, ICMF, Jeju, Korea [E1]
DRO entry for this publication

2012 Institute for Frontier Materials

Fabijanic, D. M. and Hilditch, T. B. (2012) Effect of carburising on geometrical control during quenching of martensitic sheet steel channels, Journal of materials processing technology, vol. 212, no. 8, pp. 1802-1809, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84860265464
DRO entry for this publication

Kumar, Apurv, Hodgson, Peter, Fabijanic, Daniel and Gao, Weimin (2012) Numerical solution of gas–solid flow in fluidised bed at sub-atmospheric pressures, Advanced powder technology, vol. 23, no. 4, pp. 485-492, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3837 – Scopus EID: 2-s2.0-84864772204
Citation counts: Scopus - 3, Thomson - 1
DRO entry for this publication

2011 Institute for Frontier Materials

Gao, Wei-min, Fabijanic, Daniel, Hilditch, Tim and Kong, Ling-xue (2011) Integrated fluid-thermal-structural numerical analysis for the quenching of metallic components, Shanghai Jiaotong university (science), vol. 16, no. 2, pp. 137-140, Shanghai Jiaotong Daxue, Shanghai, China [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Jain, Sidharth*, Fabijanic, Daniel, Chandra, Kamlesh* and Agarwala, Vijaya* (2011) Microstructure and mechanical properties of nitrided and chromized short steel fiber reinforced aluminum based P/M composites, Materials science forum, vol. 690, pp. 335-338, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Ralston, K. D.*, Fabijanic, D., Jones, R. T.* and Birbilis, N.* (2011) Achieving a chromium rich surface upon steels via FBR-CVD chromising treatments, Corrosion science, vol. 53, no. 9, pp. 2835-2842, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4761 – Scopus EID: 2-s2.0-79959376113
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Ralston, K. D.*, Fabijanic, D. and Birbilis, N.* (2011) Effect of grain size on corrosion of high purity aluminium, Electrochimica acta, vol. 56, no. 4, pp. 1729-1736, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1629 – Scopus EID: 2-s2.0-79151476074
Citation counts: Scopus - 28, Thomson - 22
DRO entry for this publication

2010 Institute for Frontier Materials

Ralston, Kevin D.*, Fabijanic, Dan and Birbilis, Nick* (2010) Surface modification for enhanced corrosion resistance using fluid bed reactor chemical vapour deposition (FBR-CVD), Materials science forum, vol. 654-656, pp. 1956-1959, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Fabijanic, D. M. and Hodgson, P. D. (2010) Surface alloying of metals using fluid bed reactor, International heat treatment and surface engineering, vol. 4, no. 3, pp. 103-104, Maney Publishing, London, England [C2]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Hilditch, Tim, Toman, S. and Fabijanic, Dan (2007) Post-forming heat treatment of dual phase steel components for automotive applications using a fluid bed furnace, Materials forum, vol. 31, pp. 24-30, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Fabijanic, Dan and Hodgson, Peter (2007) A new duplex surface modifcation process using fluid bed CVD, Thermal processing and surface engineering : key activities in the global knowledge economy ; the 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) congress ; 30th October to 1st November 2007, Brisbane, Australia ; proceed, p. 115, Materials Australia, Melbourne, Vic. [E3]
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Gao, Weimin, Kong, Lingxue*, Fabijanic, Dan and Hodgson, Peter (2006) Computational simulation of the influence of moving solid particles on species diffusion and chemical reactions, in Topping, B.H.V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Fifth International Conference on Engineering Computational Technology, pp. 467-468, Civil-Comp, Kippen [E1]
DRO entry for this publication

2005 School of Engineering

Fabijanic, Dan, Kelly, Georgina, Long, John and Hodgson, Peter (2005) A nitrocarburising and low-temperature chromising duplex surface treatment, Materials forum, vol. 29, pp. 77-82, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2004 School of Engineering

Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2004) Development of a duplex surface treatment using fluidised bed technololgy, Materials Australia, vol. 37, no. 1, pp. 12-15, Institute of Metals and Materials Australasia Ltd, Parkville, Vic. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2002 School of Engineering

Fabijanic, Dan, Kelly, Georgina, Cardew-Hall, Michael* and Hodgson, Peter (2002) Galling reduction through die surface treatment - testing three treatments for sheet metal stamping, Stamping journal, vol. 14, no. 2, pp. 30-31, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2001 School of Engineering

Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2001) Combating adhesive wear in automotive stamping, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 237-242, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Fabijanic, D., Miller, C., Barnett, M., Cardew-Hall, M.*, Haynes, D.* and Hodgson, P. (2001) Investigation of tool finish direction and lubrication in the forming of cylindrical cups, in Duflou, J.R. (eds), SheMet 2001 : Proceedings of the 9th International Conference on Sheet Metal, pp. 101-108, Heverlee, Katholieke Universiteit Leuven, Departement Werktuigkunde, Leuven, Belgium [E2]
DRO entry for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Daniel Fabijanic

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 23rd July 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011