Research Services Division

Deakin Research

Research Output for Bronwyn Fox

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2014 Institute for Frontier Materials

Byrne, Nolene, Leblais, Alexis and Fox, Bronwyn (2014) Preparation of polyacrylonitrile–natural polymer composite precursors for carbon fiber using ionic liquid co solvent solutions, Journal of materials chemistry A, vol. 2, no. 10, pp. 3424-3429, Royal Society of Chemistry, London, Eng. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Chen, Zhiqiang, Dai, Xiujuan J., Magniez, Kevin, Lamb, Peter R., Fox, Bronwyn L. and Wang, Xungai (2014) Improving the mechanical properties of multiwalled carbon nanotube/epoxy nanocomposites using polymerization in a stirring plasma system, Composites part A : applied science and manufacturing, vol. 56, pp. 172-180, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-84887053424
Citation counts: Scopus - 1
DRO entry for this publication

Huson, Mickey G.*, Church, Jeffrey S.*, Kafi, Abdullah A., Woodhead, Andrea L.*, Khoo, Jiyi*, Kiran, M.S.R.N.*, Bradby, Jodie E.* and Fox, Bronwyn L. (2014) Heterogeneity of carbon fibre, Carbon, vol. 68, pp. 240-249, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1412 – Scopus EID: 2-s2.0-84887975146
DRO entry for this publication

Naebe, Minoo, Wang, Jing, Amini, Abbas*, Khayyam, Hamid, Hameed, Nishar, Li, Lu Hua, Chen, Ying and Fox, Bronwyn (2014) Mechanical property and structure of covalent functionalised graphene / epoxy nanocomposites, Scientific reports, vol. 4, pp. 1-7, Nature Publishing Group, London, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2013 Institute for Frontier Materials

Bafekrpour, Ehsan, Simon, George P*, Yang, Chunhui*, Habsuda, Jana* and Fox, Bronwyn L (2013) Fabrication, characterization and modeling of functionally graded synthetic graphite/polymer nanocomposites, in Wang, Xiaoying (eds), Nanocomposites: synthesis, characterization and applications, pp. 311-327, Nova Science Publishers, Commack, NY [B1]
DRO entry for this publication

Agius, S.L., Magniez, K.J.C. and Fox, B.L. (2013) Cure behaviour and void development within rapidly cured out-of-autoclave composites, Composites Part B : engineering, vol. 47, pp. 230-237, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4883 – Scopus EID: 2-s2.0-84872123918
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Awaja, Firas*, Gilbert, Michael, Naebe, Minoo, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2013) Ageing of surface treated thermoplastic polyolefins, Polymer degradation and stability, vol. 98, no. 9, pp. 1699-1704, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1691 – Scopus EID: 2-s2.0-84881166199
DRO entry for this publication

Bafekrpour, Ehsan, Yang, Chunhui*, Natali, Maurizio* and Fox, Bronwyn (2013) Functionally graded carbon nanofiber/phenolic nanocomposites and their mechanical properties, Composites part A : applied science and manufacturing, vol. 54, pp. 124-134, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-84882407035
Citation counts: Scopus - 2
DRO entry for this publication

Bafekrpour, Ehsan, Simon, George P.*, Yang, Chunhui*, Chipara, Mircea*, Habsuda, Jana* and Fox, Bronwyn (2013) Functionally graded carbon nanofiber-phenolic nanocomposites for sudden temperature change applications, Polymer, vol. 54, no. 15, pp. 3940-3948, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-84879600797
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Bafekrpour, Ehsan, Simon, George P.*, Yang, Chunhui*, Chipara, Mircea*, Habsuda, Jana* and Fox, Bronwyn L. (2013) A novel carbon nanofibre/phenolic nanocomposite coated polymer system for tailoring thermal behaviour, Composites Part A : applied science and manufacturing, vol. 46, pp. 80-88, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-84870817537
Citation counts: Scopus - 7, Thomson - 7
DRO entry for this publication

Bafekrpour, Ehsan, Yang, Chunhui* and Fox, Bronwyn L. (2013) Bending behaviour of step-wise graded carbon nanofiber/polymer nanocomposites, International journal of advanced engineering applications, vol. 2, no. 4, pp. 47-52, Fragrance Journals, New Dehli, India [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Bafekrpour, Ehsan, Simon, George P.*, Naebe, Minoo, Habsuda, Jana*, Yang, Chunhui* and Fox, Bronwyn (2013) Preparation and properties of composition-controlled carbon nanofiber/phenolic nanocomposites, Composites part B : engineering, vol. 52, pp. 120-126, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4883 – Scopus EID: 2-s2.0-84878576679
Citation counts: Scopus - 4
DRO entry for this publication

Chen, Zhiqiang, Dai, Xiujuan J., Magniez, Kevin, Lamb, Peter R., Rubin de Celis Leal, David*, Fox, Bronwyn L. and Wang, Xungai (2013) Improving the mechanical properties of epoxy using multiwalled carbon nanotubes functionalized by a novel plasma treatment, Composites part A : applied science and manufacturing, vol. 45, pp. 145-152, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-84870772168
Citation counts: Scopus - 7, Thomson - 4
DRO entry for this publication

Chen, Zhiqiang, Dai, Xiujuan J., Lamb, Peter, du Plessis, Johan*, Rubin de Celis Leal, David*, Magniez, Kevin, Fox, Bronwyn L. and Wang, Xungai (2013) Coating and functionalization of carbon fibres using a three-step plasma treatment, Plasma processes and polymers, vol. 10, no. 12, pp. 1100-1109, Wiley-VCH Verlag, Weinheim, Germany [C1]
ERA journal ID: 1227 – Scopus EID: 2-s2.0-84890563528
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

De Souza, M.L., Mardel, J.I.* and Fox, B.L. (2013) Effect of manufacturing method and aging environment on painted automotive carbon fibre composite surfaces, Applied composite materials, vol. 20, no. 5, pp. 747-759, Springer, Berlin, Germany [C1]
ERA journal ID: 4870 – Scopus EID: 2-s2.0-84885948411
DRO entry for this publication

de Souza, M.L., Mardel, J.I.* and Fox, B.L. (2013) Hygrothermal effects on painted carbon fibre composite surfaces, Journal of composite materials, vol. 47, no. 5, pp. 539-547, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-84877828792
DRO entry for this publication

Garschke, C., Parlevliet, P.P.*, Weimer, C.* and Fox, B.L. (2013) Cure kinetics and viscosity modelling of a high-performance epoxy resin film, Polymer testing, vol. 32, no. 1, pp. 150-157, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1697 – Scopus EID: 2-s2.0-84869237259
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Hameed, Nishar, Church, Jeffrey S.*, Salim, Nisa V., Hanley, Tracey L.*, Amini, Abbas and Fox, Bronwyn L. (2013) Dispersing single-walled carbon nanotubes in ionic liquids : a quantitative analysis, RSC advances, vol. 3, no. 43, pp. 20034-20039, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Hameed, Nishar, Salim, Nisa V., Hanley, Tracey L.*, Sona, Mrunali*, Fox, Bronwyn L. and Guo, Qipeng (2013) Individual dispersion of carbon nanotubes in epoxy via a novel dispersion-curing approach using ionic liquids, Physical chemistry chemical physics, vol. 15, no. 28, pp. 11696-11703, Royal Society of Chemistry, Cambridge, England [C1]
ERA journal ID: 1219 – Scopus EID: 2-s2.0-84879863291
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Henderson, Luke C., Thornton, Megan T., Byrne, Nolene, Fox, Bronwyn L., Waugh, Kelsey D., Squire, Jennifer S., Servinis, Linden, Delaney, Joshua P., Brozinski, Hannah L., Andrighetto, Luke M. and Altimari, Jarrad M. (2013) Protic ionic liquids as recyclable solvents for the acid catalysed synthesis of diphenylmethyl thioethers, Comptes rendus chimie, vol. 16, no. 7, pp. 634-639, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1334 – Scopus EID: 2-s2.0-84880230863
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Magniez, Kevin, Voda, Andreea S., Kafi, Abdullah A., Fichini, Audrey*, Guo, Qipeng and Fox, Bronwyn L. (2013) Overcoming interfacial affinity issues in natural fiber reinforced polylactide biocomposites by surface adsorption of amphiphilic block copolymers, ACS applied materials and interfaces, vol. 5, no. 2, pp. 276-283, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 40638 – Scopus EID: 2-s2.0-84872834107
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Naebe, Minoo, Sandlin, James*, Crouch, Ian* and Fox, Bronwyn (2013) Novel polymer-ceramic composites for protection against ballistic fragments, Polymer composites, vol. 34, no. 2, pp. 180-186, Wiley, London, England [C1]
ERA journal ID: 1690 – Scopus EID: 2-s2.0-84872317441
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Nuihiji, Betime, Attart, Darren*, Thorogood, Gordon*, Hanley, Tracey*, Magniez, Kevin, Bungar, Jenny and Fox, Bronwyn (2013) The effect of a rapid heating rate, mechanical vibration and surfactant chemistry on the structure-property relationships of epoxy/clay nanocomposites, Materials, vol. 6, no. 8, pp. 3624-3640, MDI Publishing, Basel, Switzerland [C1]
ERA journal ID: 123663 – Scopus EID: 2-s2.0-84884393848
DRO entry for this publication

Servinis, Linden, Henderson, Luke C., Gengenbach, Thomas R.*, Kafi, Abdullah A., Huson, Mickey G.* and Fox, Bronwyn L. (2013) Surface functionalization of unsized carbon fiber using nitrenes derived from organic azides, Carbon, vol. 54, pp. 378-388, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1412 – Scopus EID: 2-s2.0-84872838999
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Al-Kharabsheh, B., Baiuk, A., Al-Ameri, R. and Fox, B. (2013) Improving performance of CFRP retrofitted RC members using rubber modified epoxy (ongoing research), in Al-Mahaidi, Riadh; Zhao, Xiao-Ling; Smith, Scott T. and Bai, Yu (eds), APFIS 2013 : Proceedings of the Fourth Asia-Pacific Conference on FRP in Structures 2013, pp. 1-6, International Institute for FRP in Construction, Melbourne, Vic. [E1.1]
DRO entry for this publication

Creighton, Claudia, Kafi, Abdullah, Henderson, Luke, Servinis, Linden, Dai, Xiujuan Jane, Chen, Zhiqiang, Huson, Mickey*, Gengenbach, Thomas*, Wiggins, Jeff* and Fox, Bronwyn (2013) New surface treatments for carbon fibres to enhance fibre matrix adhesion in composites, in Unknown (ed.), 34APS 2013 : Symposium Handbook of the 34th Australasian Polymer Symposium, p. 202, The Symposium, Darwin, N.T. [E2]
DRO entry for this publication

Fox, Bronwyn (2013) Carbon nexus : opportunities for translational research in carbon fibres and compsites, in Unknown (ed.), 34APS 2013 : Symposium Handbook of the 34th Australasian Polymer Symposium, p. 173, The Symposium, Darwin, N.T. [E2]
DRO entry for this publication

Kafi, A., Henderson, L., Servinis, L., Huson, M.*, Gengenbach, T.*, Khoo, J.*, Garschke, C. and Fox, B. (2013) New surface treatments for low cost carbon fiber, in Unknown (ed.), SAMPE 2013 : Education and green sky - materials technology for a better world : Proceedings of the Society for the Advancement of Material and Process Engineering 2013 conference & exhibition, pp. 456-469, SAMPE, Long Beach, Calif. [E3]
Citation counts: Scopus - 1
DRO entry for this publication

2012 Institute for Frontier Materials

Altimari, Jarrad M., Delaney, Joshua P., Servinis, Linden, Squire, Jennifer S., Thornton, Megan T., Khosa, Simren K., Long, Benjamin M., Johnstone, Mark D., Fleming, Cassandra L., Pfeffer, Frederick M., Hickey, Shane M., Wride, Matthew P., Ashton, Trent D., Fox, Bronwyn L., Byrne, Nolene and Henderson, Luke C. (2012) Rapid formation of diphenylmethyl ethers and thioethers using microwave irradiation and protic ionic liquids, Tetrahedron letters, vol. 53, no. 16, pp. 2035-2039, Pergamon, Oxford, England [C1]
ERA journal ID: 1602 – Scopus EID: 2-s2.0-84858439205
Citation counts: Scopus - 5, Thomson - 7
DRO entry for this publication

Bafekrpour, Ehsan, Simon, George P.*, Yang, Chunhui, Habsuda, Jana*, Naebe, Minoo and Fox, Bronwyn (2012) Effect of compositional gradient on thermal behavior of synthetic graphite-phenolic nanocomposites, Journal of thermal analysis and calorimetry, vol. 109, no. 3, pp. 1169-1176, Springer, Berlin, Germany [C1]
ERA journal ID: 1477 – Scopus EID: 2-s2.0-84867396219
Citation counts: Thomson - 11
DRO entry for this publication

Bafekrpour, Ehsan, Simon, George P.*, Habsuda, Jana*, Naebe, Minoo, Yang, Chunhui and Fox, Bronwyn (2012) Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites, Materials science and engineering A, vol. 545, pp. 123-131, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84859720431
Citation counts: Scopus - 13, Thomson - 12
DRO entry for this publication

Chen, Zhiqiang, Dai, Xiujuan J., Lamb, Peter R., de Celis Leal, David R., Fox, Bronwyn L., Chen, Ying, du Plessis, Johan*, Field, Matthew* and Wang, Xungai (2012) Practical amine functionalization of multi-walled carbon nanotubes for effective interfacial bonding, Plasma processes and polymers, vol. 9, no. 7, pp. 733-741, Wiley – VCH Verlag GmbH & Co. KGaA, Weinheim, Germany [C1]
ERA journal ID: 1227 – Scopus EID: 2-s2.0-84863693530
Citation counts: Scopus - 7, Thomson - 6
DRO entry for this publication

Garschke, C., Weimer, C.*, Parlevliet, P. P.* and Fox, B. L. (2012) Out-of-autoclave cure cycle study of a resin film infusion process using in situ process monitoring, Composites part A : applied science and manufacturing, vol. 43, no. 6, pp. 935-944, Pergamon, Oxford, England [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-84860141956
Citation counts: Scopus - 6, Thomson - 5
DRO entry for this publication

Kafi, Abdullah A., Chen, Zhiqiang, Dai, Xiujuan J., Fox, Bronwyn L., Lamb, Peter R. and Wang, Xungai (2012) Understanding wettability changes from practical plasma functionalization of carbon nanotubes, Nanoscience and nanotechnology letters, vol. 4, no. 3, pp. 344-347, American Scientific Publishers, Stevenson Ranch, Calif. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Kafi, Abdullah A., Magniez, Kevin, Cinquemani, Claudio* and Fox, Bronwyn L. (2012) Influence of atmospheric helium plasma on the surface energy of jute fibres and the performance of resulting composites, Journal of adhesion science and technology, vol. 26, no. 1-2, pp. 151-162, VSP, Utrecht, The Netherlands [C1]
ERA journal ID: 3971 – Scopus EID: 2-s2.0-84863185828
Citation counts: Scopus - 1, Thomson - 2
DRO entry for this publication

Kafi, Abdullah A., Magniez, Kevin and Fox, Bronwyn L. (2012) Measuring the adhesion force on natural fibre surface using scanning probe microscopy, Journal of adhesion science and technology, vol. 26, no. 1-3, pp. 175-187, V S P (Brill Academic Publishing), Leiden, Netherlands [C1]
ERA journal ID: 3971 – Scopus EID: 2-s2.0-84863198419
Citation counts: Scopus - 1
DRO entry for this publication

Magniez, K., Fox, Bronwyn L. and Looney, Mark G.* (2012) Nanocomposites of poly(m-xylene diamide) with polyhedral oligomeric silsesquioxane, montmorillonite, and their combination: Structure and properties, Polymer engineering and science, vol. 52, no. 7, pp. 1402-1412, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1692 – Scopus EID: 2-s2.0-84862516233
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Servinis, Linden, Fox, Bronwyn L., Healy, Peter C.* and Henderson, Luke C. (2012) Methyl 3-[4-(4-nitrobenzyloxy)phenyl]propanoate, Acta crystallographica. Section E, structure reports online, vol. E68, no. 7, pp. 1997-1998, International Union of Crystallography, Chester, England [C1]
ERA journal ID: 34322 – Scopus EID: 2-s2.0-84863585069
DRO entry for this publication

Bafekrpour, E., Yang, C.* and Fox, B. (2012) Mechanical behaviour of functionally graded carbon nanofibre/phenolic nanocomposites: numerical modelling and experimental validation, in Unknown (ed.), ICCM 2013 : Proceedings of 4th International Conference on Computational Methods, pp. 1-8, Queensland University of Technology, Gold Coast, Queensland [E1]
DRO entry for this publication

Bafekrpour, E.*, Kafi, A. A., Simon, G. P.*, Yang, C.*, Habsuda, J.*, Naebe, M. and Fox, B. L. (2012) Preparation and properties of stepwise graded synthetic graphite/phenolic nanocomposites, in Unknown (ed.), ECCM 2012 : Proceedings of the 15th European Conference on Composite Materials, ECCM, Venice, Italy [E2]
DRO entry for this publication

Bafekrpour, E., Simon, G.P.*, Naebe, M., Habsuda, J.*, Yang, C.* and Fox, B. (2012) Composition-optimized synthetic graphite/polymer nanocomposites, in Unknown (ed.), ANTEC 2012 : Proceedings of the 70th Annual Technical Conference of the Society of Plastics Engineers, pp. 437-441, The Conference, Orlando, Fla. [E3]
Citation counts: Scopus - 4
DRO entry for this publication

Kafi, A.A. and Fox, B.L. (2012) Mapping the surface characteristics of PAN based carbon fibres, in Unknown (ed.), Proceedings of the Eighth International Symposium on Contact Angle, Wettability and Adhesion 2012, The Symposium, Quebec City, Quebec [E3]
DRO entry for this publication

2011 Institute for Frontier Materials

Herring, M. L. and Fox, B. L. (2011) The effect of a rapid curing process on the surface finish of a carbon fibre epoxy composite, Composites part b : engineering, vol. 42, no. 5, pp. 1035-1043, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 4883 – Scopus EID: 2-s2.0-79956102591
Citation counts: Scopus - 7, Thomson - 6
DRO entry for this publication

Francis, Paul S., Hindson, Christopher M., Terry, Jessica M., Smith, Zoe M., Slezak, Teo, Adcock, Jacqui L., Fox, Bronwyn L. and Barnett, Neil W. (2011) Enhanced permanganate chemiluminescence, Analyst, vol. 136, no. 1, pp. 64-66, Royal Society of Chemistry, Cambridge, U. K. [C1]
ERA journal ID: 1608 – Scopus EID: 2-s2.0-78649834004
Citation counts: Scopus - 13, Thomson - 16
DRO entry for this publication

Gilbert, Michael J.*, Awaja, Firas, Kelly, Georgina L., Fox, Bronwyn L., Brynolf, Russell* and Pigram, Paul J.* (2011) Tailoring the surface chemistry of carbon fiber and E-glass composites for improved adhesion, Surface and interface analysis, vol. 43, no. 5, pp. 856-864, John Wiley & Sons Ltd, Oxford, England [C1]
ERA journal ID: 1506 – Scopus EID: 2-s2.0-79953716257
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Kafi, Abdullah A., Magniez, Kevin and Fox, Bronwyn L. (2011) A surface-property relationship of atmospheric plasma treated jute composites, Composites science and technology, vol. 71, no. 15, pp. 1692-1698, Pergamon, Oxford, United Kingdom [C1]
ERA journal ID: 4884 – Scopus EID: 2-s2.0-80053953219
Citation counts: Scopus - 7, Thomson - 7
DRO entry for this publication

Kafi, Abdullah A., Magniez, Kevin and Fox, Bronwyn L. (2011) Effect of manufacturing process on the flexural, fracture toughness, and thermo-mechanical properties of bio-composites, Composites part a : applied science and manufacturing, vol. 42, no. 8, pp. 993-999, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-79957715829
DRO entry for this publication

Magniez, Kevin, Chaffraix, Thomas and Fox, Bronwyn (2011) Toughening of a carbon-fibre composite using electrospun poly(Hydroxyether of Bisphenol A) nanofibrous membranes through inverse phase separation and inter-domain etherification, Materials, vol. 4, no. 11, pp. 1967-1984, M D P I AG, Basel, Switzerland [C1]
ERA journal ID: 123663 – Scopus EID: 2-s2.0-84865515156
Citation counts: Scopus - 5
DRO entry for this publication

Magniez, Kevin, Fox, Bronwyn Louise and Lonney, Mark Graham* (2011) Effect of drawing on the molecular orientation, polymorphism, and properties of melt-spun nanocomposite fibers based on nylon 6 with polyhedral oligomeric silsesquioxane, montmorillonite, and their combination, Polymer composites, vol. 32, no. 4, pp. 604-614, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1690 – Scopus EID: 2-s2.0-79952820981
Citation counts: Scopus - 2, Thomson - 3
DRO entry for this publication

Nuhiji, Betime, Attard, Darren*, Thorogood, Gordon*, Hanley, Tracey*, Magniez, Kevin and Fox, Bronwyn (2011) The effect of alternate heating rates during cure on the structure-property relationships of epoxy/MMT clay nanocomposites, Composites science and technology, vol. 71, no. 15, pp. 1761-1768, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4884 – Scopus EID: 2-s2.0-80054008223
Citation counts: Thomson - 8, Scopus - 9
DRO entry for this publication

Bafekrpour, Ehsan, Habsuda, Jana*, Simon, George* and Fox, Bronwyn (2011) Transient temperature distribution in functionally graded graphite/Polymer nanocomposites based on temperature dependent properties, in Smirnova, Diana S.; Schoch, K. F. Jr. and Kwok, Queenie (eds), NATAS 2011 : 39th North American Thermal Analysis Society Conference [E2]
DRO entry for this publication

2010 Institute for Frontier Materials

Zhang, Jin and Fox, Bronwyn (2010) Composite materials manufactured by Quickstep technology : mechanical performance and thermal mechanical properties, Lambert Academic Publishing, Saaerbrucken, Germany [A2]
DRO entry for this publication

Adamson, Benjamin P. and Fox, Bronwyn L. (2010) An evaluation of the performance of advanced melded composite joints, Composite structures, vol. 92, no. 9, pp. 2071-2076, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 3731 – Scopus EID: 2-s2.0-77950863353
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Agius, Steven L., Magniez, Kevin J. C. and Fox, Bronwyn L. (2010) Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite, Composite structures, vol. 92, no. 9, pp. 2119-2127, Elsevier, Kidlington, England [C1]
ERA journal ID: 3731 – Scopus EID: 2-s2.0-77950859043
Citation counts: Scopus - 9, Thomson - 6
DRO entry for this publication

Awaja, Firas, Gilbert, Michael*, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2010) Exploring molecular changes at the surface of polypropylene after accelerated thermomolecular adhesion treatments, ACS applied materials & interfaces, vol. 2, no. 5, pp. 1505-1513, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 40638 – Scopus EID: 2-s2.0-77954969606
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Herring, M. L., Mardel, J. I.* and Fox, B. L. (2010) The effect of material selection and manufacturing process on the surface finish of carbon fibre composites, Journal of materials processing technology, vol. 210, no. 6-7, pp. 926-940, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-77949492497
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Magniez, Kevin, De Lavigne, Christelle and Fox, Bronwyn (2010) The effects of molecular weight and polymorphism on the fracture and thermo-mechanical properties of a carbon-fibre composite modified by electrospun poly (vinylidene fluoride) membranes, Polymer, vol. 51, no. 12, pp. 2585-2596, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-77954834664
Citation counts: Scopus - 11, Thomson - 11
DRO entry for this publication

Zhang, Jin, Guo, Qipeng, Huson, Mickey*, Slota, Irene* and Fox, Bronwyn (2010) Interphase study of thermoplastic modified epoxy matrix composites : phase behaviour around a single fibre influenced by heating rate and surface treatment, Composites Part A : Applied Science and Manufacturing, vol. 41, no. 6, pp. 787-794, Pergamon, Oxford, England [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-77950021701
Citation counts: Scopus - 10, Thomson - 7
DRO entry for this publication

Zhang, Jin, Guo, Qipeng and Fox, Bronwyn (2010) Thermal and mechanical properties of a dendritic hydroxyl-functional hyperbranched polymer and tetrafunctional epoxy resin blends, Journal of polymer science part B : polymer physics, vol. 48, no. 4, pp. 417-424, John Wiley & Sons, Hoboken, N.J. [C1]
ERA journal ID: 1679 – Scopus EID: 2-s2.0-74349094842
Citation counts: Scopus - 19, Thomson - 18
DRO entry for this publication

Sudharsan, Ranjani, Fox, Bronwyn L. and Hodgson, Peter D. (2010) High strain rate tensile properties of rapidly cured woven carbon fibre composites, in Unknown (ed.), Proceedings of the International SAMPE Symposium and Exhibition; SAMPE 2010 conference proceedings, pp. 1-15, Society for the Advancement of Material and Process Engineering, Covina, CA [E1]
DRO entry for this publication

Magniez, K., De Lavigne, C. and Fox, B.L. (2010) Properties of a carbon-fibre composite modified by electrospun poly (vinylidene fluoride), in D'Amore, Alberto; Acierno, Domenico and Grassia, Luigi (eds), Proceedings of the Vth International Conference on Times of Polymers (TOP) and Composites; 2010, pp. 22-24, American Institute of Physics, Melville, N.Y. [E2]
DRO entry for this publication

2009 Institute for Frontier Materials

Awaja, Firas, Gilbert, Michael*, Fox, Bronwyn, Kelly, Georgina and Pigram, Paul J.* (2009) Investigation of the postcure reaction and surface energy of epoxy resins using time-of-flight secondary ion mass spectrometry and contact-angle measurements, Journal of applied polymer science, vol. 113, no. 5, pp. 2755-2764, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-67650000481
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Awaja, Firas, Gilbert, Michael*, Kelly, Georgina, Fox, Bronwyn and Pigram, Paul J.* (2009) Adhesion of polymers, Progress in polymer science, vol. 34, no. 9, pp. 948-968, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1701 – Scopus EID: 2-s2.0-69249206821
Citation counts: Scopus - 103, Thomson - 83
DRO entry for this publication

Awaja, Firas, van Riessen, Grant*, Fox, Bronwyn, Kelly, Georgina and Pigram, Paul J.* (2009) Time-of-flight secondary ion mass spectrometry investigation of epoxy resin curing behavior in real time, Journal of applied polymer science, vol. 113, no. 5, pp. 2765-2776, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-67649997262
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Brighton, Aaron, Forrest, Mark, Starbuck, Mike*, Erdman, Donald* and Fox, Bronwyn (2009) Strain rate effects on the energy absorption of rapidly manufactured composite tubes, Journal of composite materials, vol. 43, no. 20, pp. 2183-2200, Sage, London, England [C1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-69949172518
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Kafi, Abdullah A., Hurren, Christopher J., Huson, Mickey G.* and Fox, Bronwyn L. (2009) Analysis of the effects of atmospheric helium plasma treatment on the surface structure of jute fibres and resulting composite properties, Journal of adhesion science and technology, vol. 23, no. 16, pp. 2109-2120, VNU Science Press, Utrecht, The Netherlands [C1]
ERA journal ID: 3971 – Scopus EID: 2-s2.0-73549102203
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Li, Li*, Dai, Xiujuan J., Xu, Hong S.*, Zhao, Jing H.*, Yang, Ping*, Maurdev, George*, du Plessis, Johan*, Lamb, Peter R., Fox, Bronwyn and Michalski, Wojtek* (2009) Combined continuous wave and pulsed plasma modes : For more stable interfaces with higher functionality on metal and semiconductor surfaces, Plasma processes and polymers, vol. 6, no. 10, pp. 615-619, Wiley – VCH Verlag GmbH & Co. KGaA, Weinheim, Germany [C1]
ERA journal ID: 1227 – Scopus EID: 2-s2.0-70450215283
Citation counts: Scopus - 11, Thomson - 10
DRO entry for this publication

Magniez, Kevin, Fox, Bronwyn L and Looney, Mark G* (2009) Silver sulfide as a staining agent for scanning electron microscopy of nylon 6/MXD6 blends, Polymer international, vol. 58, no. 8, pp. 858-862, John Wiley & Sons, West Sussex, England [C1]
ERA journal ID: 1693 – Scopus EID: 2-s2.0-70349487148
DRO entry for this publication

Magniez, K., Fox, B. L. and Looney, M. G.* (2009) Nonisothermal Crystallization Behavior of Poly(m-xylene adipamide)/Montmorillonite Nanocomposites, Journal of polymer science. Part B, Polymer physics, vol. 47, no. 13, pp. 1300-1312, John Wiley & Sons, Inc, Malden, Mass. [C1]
ERA journal ID: 1679 – Scopus EID: 2-s2.0-68149163172
Citation counts: Scopus - 12, Thomson - 10
DRO entry for this publication

Zhang, Jin, Guo, Qipeng and Fox, Bronwyn (2009) Study on thermoplastic-modified multifunctional epoxies : influence of heating rate on cure behaviour and phase separation, Composites science and technology, vol. 69, no. 7-8, pp. 1172-1179, Pergamon, Oxford, England [C1]
ERA journal ID: 4884 – Scopus EID: 2-s2.0-64849099375
Citation counts: Scopus - 18, Thomson - 10
DRO entry for this publication

Zhang, J., Fox, B. L., Gao, D.* and Stevenson, A. W.* (2009) Inspection of drop-weight impact damage in woven CFRP laminates fabricated by different processes, Journal of composite materials, vol. 43, no. 19, pp. 1939-1946, Sage, London, England [C1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-69449092484
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Zhang, Jin, Guo, Qipeng and Fox, Bronwyn (2009) Structural and material properties of a rapidly cured thermoplastic-toughened epoxy system, Journal of applied polymer science, vol. 113, no. 1, pp. 485-491, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-67249107522
Citation counts: Scopus - 6, Thomson - 3
DRO entry for this publication

Kafi, Abdullah A. and Fox, Bronwyn L. (2009) Enhancing the fiber–matrix adhesion in woven jute fabric reinforced polyester resin-based composites, in Mittal, K. L. (eds), Contact angle, wettability and adhesion, pp. 377-390, Brill, Leiden, Netherlands [E1]
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Awaja, Firas, van Riessen, Grant*, Kelly, Georgina, Fox, Bronwyn and Pigram, Paul J* (2008) ToF-SIMS investigation of epoxy resin curing reaction at different resin to hardener ratios, Journal of applied polymer science, vol. 110, no. 5, pp. 2711-2717, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-56749103927
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Awaja, Firas, Gilbert, M.*, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2008) Surface properties of polypropylene following a novel industrial surface-treatment process, Surface and interface analysis, vol. 40, no. 11, pp. 1454-1462, John Wiley & Sons, Oxford, England [C1]
ERA journal ID: 1506 – Scopus EID: 2-s2.0-55649111887
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2008) 固化条件对热塑增韧环氧树脂的固化动力学和相分离的影响, Cailiao Gongcheng / Journal of materials engineering, no. z1, pp. 30-34, Cailian Yanjiuyuan, Beijing, China [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Zhang, Jin, Fox, Bronwyn and Guo, Qipeng (2008) Consistent model predictions for isothermal cure kinetics investigation of high performance epoxy prepregs, Journal of applied polymer science, vol. 107, no. 4, pp. 2231-2237, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-38849186125
Citation counts: Scopus - 6, Thomson - 4
DRO entry for this publication

Kafi, Abdullah A., Hurren, Christopher J. and Fox, Bronwyn L. (2008) Influence of helium atmospheric plasma treatment on surface and fracture-mechanical behaviour of quickstepTM cured bio-composites, Proceedings of the 4th international conference on advanced engineered wood & hybrid composites, p. 1, The University of Maine, Bar Harbor, Me. [E3]
DRO entry for this publication

2008 External

Kafi, A. A.*, Hurren, C. J.* and Fox, B.* (2008) Influence of helium atmospheric plasma treatment on surface and fracture-mechanical behaviour of quickstep cured bio-composites, in Unknown (ed.), AEWC 2008 : Proceedings of the 4th International Conference on Advanced Engineered Wood and Hybrid Composites 2008, AEWC, Bar Harbor, Me. [E1.1]
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Corbett, Tim, Forrest, Mark and Fox, Bronwyn (2007) Investigation of processing conditions of melded parts to determine process boundaries, Materials & manufacturing processes, vol. 22, no. 6, pp. 777-781, Taylor & Francis, London, England [C1]
ERA journal ID: 3642 – Scopus EID: 2-s2.0-34547417696
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Corbett, Tim, Forrest, Mark, Le Gac, Pierre* and Fox, Bronwyn (2007) Characterization of melded carbon fibre/epoxy laminates, Composites. Part A, Applied science and manufacturing, vol. 38, no. 8, pp. 1860-1871, Pergamon, United Kingdom [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-34447324905
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2007) Manufacturing influence on the delamination fracture behavior of the T800H/3900-2 carbon fiber reinforced polymer composites, Materials & manufacturing processes, vol. 22, no. 6, pp. 768-772, Taylor & Francis Inc, United States [C1]
ERA journal ID: 3642 – Scopus EID: 2-s2.0-34547473722
Citation counts: Scopus - 14, Thomson - 8
DRO entry for this publication

Silcock, Michael D., Garschke, Claudia, Hall, Wayne and Fox, Bronwyn (2007) Rapid composite tube manufacture utilizing the quickstep™ process, Journal of composite materials, vol. 41, no. 8, pp. 965-978, Sage Science Press (UK), Lancaster, Pa. [C1.1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-34347337521
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Brighton, Aaron, Luedtke, Ben*, Brosius, Dale*, Starbuck, Mike*, Erdman, Donald* and Fox, Bronwyn (2007) Strain rate effects on the energy absorption of rapidly manufactured composite tubes, in Brosius, Dale (eds), ACCE 2007 7th Annual Automotive Composites Conference & Exhibition, pp. 1-13, SPE Automotive & Composites Divisions, Troy, Mi. [E1]
DRO entry for this publication

Coenen, Victoria*, Walker, Andrew*, Day, Richard*, Nesbitt, Alan*, Zhang, Jin and Fox, Bronwyn (2007) The effect of cure cycle heating rate on the fibre/matrix interface, in Sorensen, B.F.; Mikkelsen, L.P.; Lilholt, H.; Goutianos, S. and Abdul-Mahdi, F.S. (eds), Proceedings of the 28th Risø International Symposium on Materials Science: Interface Design of the Polymer Matrix Composites - Mechanics, Chemistry, Modelling and Manufacturing, pp. 157-164, Riso National Laboratory, Roskilde, Denmark [E1]
DRO entry for this publication

Nuhiji, B., Forrest, M., Mitchell, D.* and Fox, B. L. (2007) Structure and morphology of nanocomposites, in Whittaker, Andrew (eds), APS 2007 : 29th Australasian Polymer Symposium : 11-15 February 2007, Hotel Grand Chancellor, Hobart Tasmania : 29 APS : conference handbook, p. 117, Royal Australian Chemical Institute, Hobart, Tas. [E2]
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Silcock, Michael, Hall, Wayne, Fox, Bronwyn and Warrior, Nick* (2006) Finite element modelling of metallic tubular crash structures with an explicit code, International journal of vehicle safety, vol. 1, no. 4, pp. 292-303, Inderscience Publishers, Olney, England [C1]
ERA journal ID: 3654 – Scopus EID: Not tagged
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2006) An experimental study of low velocity impact response in 2/2 twill weave composite laminates manufactured by a novel fabrication process, Journal of materials science, vol. 42, no. 1, pp. 232-238, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-33846548640
Citation counts: Scopus - 1
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2006) Characterization and analysis of delamination fracture and nanocreep properties in carbon epoxy composites manufactured by different processes, Journal of composite materials, vol. 40, no. 14, pp. 1287-1299, Technomic Pub. Co., Lancaster, Pa. [C1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-33745588551
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Fox, Bronwyn, Silcock, Michael and Zhang, Jin (2006) Composite research at the Victorian centre for advanced materials manufacturing: quickstep, a disruptive technology for composite manufacture, Facets, vol. 5, no. 3, pp. 23-26, International Union of Materials Research Societies, Argonne, Ill. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Herring, Mandy, Kelly, Georgina, Mardel, J.*, Hodgkin, J.* and Fox, Bronwyn (2006) Surface analysis of carbon fibre composite laminates for automotive body panels, in Bandyopadhyay, Sri; Zeng, Qinghua; Berndt, Christopher; Rizkalla, Sami; Gowripalan, N.; Matisons, Janis and Samudrala, Saritha (eds), Developments in composites : advanced, infrastructural, natural & nano-composites, pp. 590-595, University of New South Wales, Sydney, N.S.W. [E1]
DRO entry for this publication

Silcock, M., Hall, W.* and Fox, Bronwyn (2006) Finite element modeling of composite tubular crash structures with an explicit code, in Brosius, Dale (eds), SPE Automotive Composites Conference : 6th annual : Sept 12-14, 2006, Detroit, Mich, SPE, Troy, Mich [E1]
DRO entry for this publication

2005 School of Engineering

Zhang, Jin and Fox, Bronwyn (2005) Effect of the manufacturing process on the interlaminar fracture toughness of 2/2 twill weave fabric carbon/epoxy composites, Materials forum (CD-ROM), vol. 29, pp. 216-221, Institute of Materials Engineering Australasia Pty Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Herring, Mandy L, Kelly, Georgina L, Mardel, James I* and Fox, Bronwyn L (2005) Surface analysis of environmentally exposed painted composites manufactured from Quickstep and autoclave processes, in Unknown (ed.), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference 2005, pp. 220-225, SAMPE Europe Business Office, Paris, France [E1.1]
DRO entry for this publication

Fox, Bronwyn, Looney, Mark G.* and Magniez, Kevin* (2005) Novel nanocomposite fibres for technical textile applications, in Unknown (ed.), Nanocomposities 2005 : Proceedings of the 2005 Nanocomposities conference, Nanocomposities, San Francisco, Calif. [E1.1]
DRO entry for this publication

Corbett, Tim, Forrest, Mark, Law, Haydn* and Fox, Bronwyn L. (2005) Melding : a new alternative to adhesive bonding, in Drechsler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference : Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 105-110, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
DRO entry for this publication

Magniez, Kevin, Fox, Bronwyn and Looney, Mark G.* (2005) Novel nanocomposite fibres for technical textile applications : synthesis and characterisation of poly(m-xylene adipamide) montmorillonite nanocomposites, Fifth World Congress Nanocomposites 2005 : August 22-24, 2005, Crowne Plaza Union Square, San Francisco, California, USA, Executive Conference Management, San Francisco, Calif. [E2]
DRO entry for this publication

Magniez, Kevin, Fox, Bronwyn L., Looney, Mark G.* and Wang, Xungai (2005) High technology nanocomposite fibres : Development of melt spun semi-aromatic polyamide nanocomposite fibres, in Drechsler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference : Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 501-506, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
DRO entry for this publication

Silcock, Michael D., Garschke, Claudia, Hall, Wayne and Fox, Bronwyn L. (2005) A novel method of tube manufacture for vehicle crashworthiness utilising the QUICKSTEP™ Process., in Dreschler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference :Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 239-244, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2005) Manufacturing process effects on the mode I interlaminar fracture toughness and nanocreep properties of CFRP, in Drechsler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference : Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 537-543, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
DRO entry for this publication

2005 Centre for Material and Fibre Innovation

Herring, M.L., Kelly, G.L., Mardel, J.I.*, Forrest, M.A., Law, H.* and Fox, B.L. (2005) Composites for automotive body panels, Materials Australia, vol. 38, no. 2, pp. 12-13, Great Southern Press, Melbourne, Vic. [C3.1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2004 Centre for Material and Fibre Innovation

Fox, Bronwyn, Lowe, Adrian* and Hodgkin, Jonathan* (2004) Investigation of failure mechanisms in aged aerospace composites, Engineering failure analysis, vol. 11, no. 2, pp. 235-241, Pergamon, London, England [C1.1]
ERA journal ID: 3667 – Scopus EID: 2-s2.0-0347930704
Citation counts: Scopus - 7, Thomson - 4
DRO entry for this publication

2003 School of Engineering

Everaert, Bruno*, Corbett, Tim, Hurren, Christopher and Fox, Bronwyn (2003) An analysis of natural fiber composite processing conditions, in Liu, Aimin (eds), International development of kenaf and allied fibers : proceedings of the International Kenaf Symposium : August 19-21, 2003, Beijing, China, pp. 137-149, CCG International, St. Paul, Minn. [E2]
DRO entry for this publication

2001 School of Engineering

Fox, Bronwyn, Lowe, A.* and Hodgkin, J.* (2001) The evaluation of accelerated ageing tests for high temperature carbon fibre composites, in Pereloma, E. and Raviprasad, Krishnamurthy (eds), Proceedings of the IMEA Conference, engineering materials 2001, pp. 141-146, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

1999 External

Otieno-Alego, V*, Creagh, D*, Jar, B*, Fox, B* and Lowe, A* (1999) Characterization of the moisture absorption and thermal ageing behaviour of polymeric composite systems using Raman spectroscopy, in Mallinson, Leslie G. (eds), Ageing Studies and Lifetime Extension of Materials : Proceedings of the First International Conference on Ageing Studies and Lifetime Extension of Materials, held July 12-14, 1999 at St Catherine's College, Oxford, UK, pp. 113-121, Kluwer Academic/Plenum Publishers, New York, N. Y. [E1.1]
DRO entry for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $13,334
  • 2008: $110,360
  • 2007: $104,915
  • 2006: $94,417

Fox, B. Structure-property relationships in thermoset nanocomposites, AINSE Grant - Postgraduate Research Award [T]

  • 2009: $5,416
  • 2007: $11,917
  • 2006: $13,000

Research Income - Other Public Sector Funding

Fox, B, Suryanarayana, M and Magniez, K. Investigation into Aircraft Plastic's repair components [U]

  • 2012: $50,000

Fox, B. Structure-property relationships in thermoset nanocomposites [U]

  • 2008: $4,333

Research Income - Industry and Other Funding

Fox, B, Naebe, M, Fabijanic, D and Fabijanic, D. Commercial Project P6.1 DMTC/DSTO/ADA/VCAMM Armour Research; P3.7: Research, Development, Design and Manufacture of a New Combat Helmet [V]

  • 2013: $120,108
  • 2012: $240,111
  • 2011: $118,000

Fox, B, Naebe, M and Magniez, K. PE Pipe Material Upgrade Feasibility Study [V]

  • 2013: $0
  • 2012: $286,050

Naebe, M, Fabijanic, D and Fox, B. VCAMM DMTC Project 7.1.2 - High Curvature Armour Systems [V]

  • 2013: $38,739

Fox, B. Research into composite solar roofing materials [V]

  • 2011: $-100,000

Research Income - Industry and Other Funding - Australian

Rolfe, B and Fox, B. The development of numerical modelling techniques for geometrically complex composite components [V.1]

  • 2010: $3,000

Fox, B. Research into composite solar roofing materials [V.1]

  • 2010: $100,000

Fox, B, Naebe, M, Fabijanic, D and Fabijanic, D. Commercial Project P6.1 DMTC/DSTO/ADA/VCAMM Armour Research; P3.7: Research, Development, Design and Manufacture of a New Combat Helmet [V.1]

  • 2010: $56,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2009: $14,500
  • 2006: $14,500

Fox, B. Quickstep Phase 11 Composite Program [V.1]

  • 2008: $624,314

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2008: $26,137

Research Income - Other Funding Sources

Fox, B. Nano-Enhanced Carbon Fibre Composites, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $22,813
  • 2012: $4,043
  • 2011: $58,333
  • 2010: $0

Fox, B. Quickstep & RST (Advanced Manufacturing CRC Project 1.6.1a), CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $97,336
  • 2012: $169,823
  • 2011: $218,621
  • 2010: $38,854

Fox, B, Magniez, K and Garschke, C. 3-118 High-volume process to manufacture carbon fibre composite parts for automotive applications , AutoCRC Ltd [X]

  • 2013: $91,130

Fox, B. Bellmont Automotive Components-The demonstration of complex shape composite components for the automotive industry using out-of-autoclave resin curing, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2012: $0
  • 2011: $0
  • 2010: $76,638
  • 2009: $30,735

Fox, B. C2-27 Lightweight Interiors, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2012: $155,402
  • 2011: $53,877
  • 2010: $12,868

Hodgson, P and Fox, B. Project 2.1a - FR-1 Complex Composite Components for Load Bearing Applications, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2012: $0
  • 2011: $328,040
  • 2010: $175,707

Fox, B, Magniez, K, Deveth, A, Vella, J and Carreno, V*. C1 32 Composite Development, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2011: $63,340
  • 2010: $126,663
  • 2009: $56,219

Higher Degree by Research Completions supervised by Bronwyn Fox

2013

Ehsan Bafekrpour
Doctor of Philosophy, Thesis entitled: Fabrication, Characterization, and Modelling of Functionally Graded Nanocomposites.
Institute for Frontier Materials Requires an Internet connection

Aaron Matthew Brighton
Doctor of Philosophy, Thesis entitled: Energy Absorption Behaviour of Rapidly Manufactured Carbon/Epoxy and Glass/Polypropylene Structures.
Institute for Frontier Materials Requires an Internet connection

2011

Steven Agius
Doctor of Philosophy, Thesis entitled: Characterisation of Out-of-Autoclave Carbon Fibre Composites.
Institute for Frontier Materials Requires an Internet connection

Claudia Garschke
Doctor of Philosophy, Thesis entitled: Characterisation of an Out-of-Autoclave Resin Film Infusion Process for Toughened Textile Composites.
Institute for Frontier Materials Requires an Internet connection

2010

Abdullah-Al Kafi
Doctor of Philosophy, Thesis entitled: Enhancing the Interfacial Properties of Quickstep (TM) Cured Bio-composites.
Institute for Frontier Materials Requires an Internet connection

Betime Nuhiji
Doctor of Philosophy, Thesis entitled: Structure and Properties of Epoxy Nanocomposites.
Institute for Frontier Materials Requires an Internet connection

2009

Mandy Loretta Herring
Doctor of Philosophy, Thesis entitled: Surface Analysis of Carbon Fibre Epoxy Composites.
Institute for Frontier Materials Requires an Internet connection

2008

Timothy Corbett
Doctor of Philosophy, Thesis entitled: Characterization and Development of the Quickstep™ Melding Process. Centre for Material and Fibre Innovation

2007

Kevin Magniez
Doctor of Philosophy, Thesis entitled: "Structure-Property Relationships of Nylon 6, MXD6, their Blends and Nanocomposites". Centre for Material and Fibre Innovation

Michael Silcock
Doctor of Philosophy, Thesis entitled: Composite Crashworthy Structures: Manufacture and Modelling. Centre for Material and Fibre Innovation

Jin Zhang
Doctor of Philosophy, Thesis entitled: Quickstep: A Novel Process for Composite Manufacture. Centre for Material and Fibre Innovation

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Thursday 27th November 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011