Research Services Division

Deakin Research

Research Output for Yakov Frayman

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2012 Centre for Intelligent Systems Research

Abdi, Hamid, Nahavandi, Saeid, Frayman, Yakov and Maciejewski, Anthony A.* (2012) Optimal mapping of joint faults into healthy joint velocity space for fault-tolerant redundant manipulators, Robotica, vol. 30, no. 4, pp. 635-648, Cambridge University Press, Cambridge, England [C1]
ERA journal ID: 3624 – Scopus EID: 2-s2.0-84862014169
Citation counts: Scopus - 4
DRO entry for this publication

2011 Centre for Intelligent Systems Research

Gunn, Bruce and Frayman, Yakov (2011) Improving casthouse throughput using discrete-event modeling, Materials science forum, vol. 693, pp. 3-9, Trans Tech Publications, Lausanne, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Abdi, Hamid, Nahavandi, Saeid and Frayman, Yakov (2011) A class of optimal fault tolerant Jacobian for minimal redundant manipulators based on symmetric geometries, in Unknown (ed.), SMC 2011 : Conference proceeding of the 2011 International Conference on Systems, Man, and Cybernetics, pp. 1532-1537, IEEE, Piscataway, N. J. [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Abdi, Hamid, Nahavandi, Saeid, Najdovski, Zoran and Frayman, Yakov (2011) Multiple actuator fault tolerance for static nonlinear systems based on minimum velocity jump, in Bittanti, Sergio; Cenedese, Angelo and Zampieri, Sandro (eds), IFAC 2011 : Proceedings of the 18th IFAC World Congress, pp. 4690-4695, International Federation of Automatic Control, Milano, Italy [E1]
DRO entry for this publication

2009 Centre for Intelligent Systems Research

Frayman, Yakov, Gunn, Bruce and Nahavandi, Saeid (2009) Towards a more holistic approach to quality improvements in aluminium die casting, Materials science forum, vol. 618-619, pp. 341-344, Trans Tech Publications Ltd., Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Khan, M. Imad, Frayman, Yakov and Nahavandi, Saeid (2009) Mixed transfer function neural networks for knowledge acquistition, in Unknown (ed.), ICIT 2009 : Future technology in service of regional industry : Proceedings of the IEEE Industrial Tecnology 2009 international conference, pp. 1-6, IEEE, Piscataway, N. J. [E1]
DRO entry for this publication

2007 School of Engineering and Information Technology

Bhatti, Asim, Nahavandi, Saeid and Frayman, Yakov (2007) 3D depth estimation for visual inspection using wavelet transform modulus maxima, Computers & electrical engineering, vol. 33, no. 1, pp. 48-57, Elsevier, Oxford, England [C1]
ERA journal ID: 4403 – Scopus EID: 2-s2.0-33750691996
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Frayman, Yakov and Nahavandi, Saeid (2007) An automated machine vision system for surface inspection of aircraft, Advanced technology for a future JSF : The Third Australian JSF Advanced Technology and Innovation Conference, p. 5, Department of Defence, Australian Government, Australia [E3]
DRO entry for this publication

Frayman, Yakov and Nahavandi, Saeid (2007) Distributed battle space modelling for decision support, Advanced technology for a future JSF : The Third Australian JSF Advanced Technology and Innovation Conference, p. 51, Department of Defence, Australian Government, Australia [E3]
DRO entry for this publication

2006 School of Engineering and Information Technology

Khan, I., Nahavandi, Saeid and Frayman, Yakov (2006) High-pressure die-casting process modeling using neural networks, in Kamruzzaman, Joarder; Begg, Rezaul and Sarker, Ruhul (eds), Artificial neural networks in finance and manufacturing, pp. 182-198, Idea Group Publishing, Hershey, PA [B1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Kelly, Georgina and Nahavandi, Saeid (2006) Recognition of lubrication defects in cold forging process with a neural network, in Kamruzzaman, Joarder; Begg, Rezaul and Sarker, Ruhul (eds), Artificial neural networks in finance and manufacturing, pp. 262-275, Idea Group Publishing, Hershey, PA [B1]
DRO entry for this publication

Frayman, Yakov, Zheng, Hong* and Nahavandi, Saeid (2006) Machine vision system for automatic inspection of surface defects in aluminum die casting, Journal of advanced computational intelligence and intelligent informatics, vol. 10, no. 3, pp. 281-286, Fuji Technology Press Ltd, Tokyo, Japan [C1]
ERA journal ID: 40120 – Scopus EID: Not tagged
DRO entry for this publication

Khan, Imad M., Frayman, Yakov and Nahavandi, Saeid (2006) Knowledge extraction from a mixed transfer function artificial neural network, Journal of advanced computational intelligence and intelligent informatics, vol. 10, no. 3, pp. 295-301, Fuji Technology Press Ltd, Tokyo, Japan [C1]
ERA journal ID: 40120 – Scopus EID: Not tagged
DRO entry for this publication

Wilkin, Tim, Frayman, Yakov and Rolfe, Bernard (2006) Adaptive control of the closed loop behaviour of manufacturing processes, in Unknown (ed.), 8th biennial ASME conference on engineering systems design and analysis July 4-7, 2006, Torino, Italy, pp. 1-9, ASME, New York, N.Y. [E1]
DRO entry for this publication

2005 School of Engineering

Frayman, Yakov and Rolfe, Bernard (2005) A loop-shaping approach to intelligent control, in Hamza, M. H. (eds), Proceedings of the second IASTED International Conference on Biomedical Engineering : February 16-18, 2004, Innsbruck, Austria, pp. 103-108, ACTA Press, Anaheim, Calif [E1]
DRO entry for this publication

Khan, M. Imad*, Frayman, Yakov and Nahavandi, Saeid (2005) Quality control of high pressure die casting using a neural network, in Pham, D. T.; Eldukhri, E. E. and Soroka, A. J. (eds), Intelligent production machines and systems : first I*PROMS Virtual Conference : 4-15 July 2005, Elsevier, Amsterdam, The Netherlands [E1.1]
DRO entry for this publication

2004 School of Engineering

Bhatti, Asim, Nahavandi, Saeid and Frayman, Yakov (2004) A multi-wavelet based technique for calculating dense 2D disparity maps from stereo, in Jamshidi, Mo; Ollero, Anibal; Foulloy, Laurent; Reuter, Mattheius; Kamrani, Ali and Hata, Yutaka (eds), Robotics : trends, principles, and applications : proceedings of the Sixth Biannual World Automation Congress (WAC), ISORA, Seville, Spain, pp. 1-6, TSI Press, Albuquerque, NM [E1]
DRO entry for this publication

Frayman, Yakov, Zheng, Hong and Nahavandi, Saeid (2004) Machine vision system for automatic inspection of surface defects in aluminium die casting, in Alo, Richard (eds), InTech'04 : Proceedings of the 5th International Conference on Intelligent Technologies, pp. 1-5, University of Houston-Downtown, Houston, Tex. [E1]
DRO entry for this publication

Khan, I., Frayman, Yakov and Nahavandi, Saeid (2004) Knowledge extraction from a mixed transfer function artificial neural network, in Alo, Richard (eds), InTech'04 : Proceedings of the 5th International Conference on Intelligent Technologies, pp. 1-6, University of Houston-Downtown, Houston, Tx [E1]
DRO entry for this publication

2003 School of Information Technology

Frayman, Yakov, Rolfe, Bernard F., Hodgson, Peter D. and Webb, Geoffrey I.* (2003) Improving the prediction of the roll separating force in a hot steel finishing mill, in Meech, John A.; Kawazoe, Yoshiyuki; Kumar, Vijay and Maguire, John F. (eds), IPMM 2003 : Intelligence in a small materials world : selected papers from the Fourth International Intelligent Processing and Manufacturing of Materials Conference, pp. 1-12, Intelligent Processing and Manufacturing of Materials, Sendai, Japan [E1.1]
DRO entry for this publication

2003 School of Engineering

Cheesewright, G.*, Cardew-Hall, M.*, Hodgson, Peter, Rolfe, Bernard and Frayman, Yakov (2003) Press shop machine analysis and trending, in Deisenroth, Michael (eds), ICPR-17 : Electronic proceedings the 17th International Conference on Production Research, pp. 1-9, Virginia Tech, Blacksburg, Va. [E1]
DRO entry for this publication

Cheesewright, G.*, Dingle, Matthew, Rolfe, Bernard, Frayman, Yakov and Cardew-Hall, M.* (2003) Development of touchscreen fault recording for an automotive press shop, in Brown, R H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia, the Conference, Melbourne, Vic. [E1]
DRO entry for this publication

Khan, M. Imad*, Nahavandi, Saeid and Frayman, Yakov (2003) Improving the quality of die castings by using artificial neural networks for porosity defect modelling, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003 : 18-20 September 2003, Brisbane, Australia, pp. 243-245, CRC for CAST Metals Manafacturing, Brisbane, Qld. [E1]
DRO entry for this publication

Khan, Imad M., Frayman, Yakov and Nahavandi, Saeid (2003) Modelling of porosity defects in high pressure die casting with a neural network, in Dhompongsa, Sompong (eds), InTech'03 : Proceedings of the Fourth International Conference on Intelligent Technologies 2003, pp. 1-6, Chiang Mai University, Institute for Science and Technology Research and Development, Chiang Mai, Thailand [E1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Webb, Geoff* and Hodgson, Peter (2003) Analysis of stamping production data with view towards quality management, in Brown, R. H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., pp. 1-15, the Conference, Melbourne, Vic [E1]
DRO entry for this publication

Frayman, Y. and Rolfe, B.F. (2003) Eccentricity and hardness control in cold rolling mills with a dynamically constructed neural controller, in Meech, John A.; Kawazoe, Yoshiyuki; Kumar, Vijay and Maguire, John F. (eds), IPMM 2003 : Intelligence in a small materials world : selected papers from the Fourth International Intelligent Processing and Manufacturing of Materials Conference, pp. 199-214, Intelligent Processing and Manufacturing of Materials, Sendai, Japan [E2]
DRO entry for this publication

2002 School of Information Technology

Frayman, Yakov, Wang, Lipo* and Wan, Chunru* (2002) Cold rolling mill thickness control using the cascade-correlation neural network, Control and cybernetics, vol. 31, no. 2, pp. 327-342, Polish Academy of Sciences, Systems Research Institute, Warszawa, Poland [C1]
ERA journal ID: 17824 – Scopus EID: 2-s2.0-0036909880
Citation counts: Scopus - 3
DRO entry for this publication

Frayman, Yakov, Rolfe, Bernard and Webb, G. (2002) Improving an inverse model of sheet metal forming by neural network based regression, in Kazerounian, Kazem (eds), Proceedings of the 2002 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 1-12, American Society of Mechanical Engineers, New York, N.Y. [E1]
DRO entry for this publication

Frayman, Yakov, Rolfe, Bernard F. and Webb, Geoffrey I. (2002) Solving regression problems using competitive ensemble models, in McKay, Bob and Slaney, John (eds), AI 2002 : Advances in artificial intelligence : proceedings of the 15th Australian Joint Conference on Artificial Intelligence, pp. 511-522, Springer, Berlin, Germany [E1]
DRO entry for this publication

Frayman, Yakov, Rolfe, Bernard, Hodgson, Peter and Webb, G.I (2002) Predicting the rolling force in hot steel rolling mill using an ensemble model, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED International Conference, pp. 143-148, ACTA Press, New York, N.Y. [E1]
DRO entry for this publication

2002 School of Engineering

Rolfe, Bernard, Frayman, Yakov, Hodgson, Peter, Webb, G.I. and Kelly, Georgina (2002) Fault detection in a cold forging process through feature extraction with a neural network, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED Conference, pp. 155-159, ACTA Press, New York, N.Y [E1]
DRO entry for this publication

1999 School of Information Technology

Frayman, Y., Ting, K. and Wang, L.* (1999) A fuzzy neural network for data mining: dealing with the problem of small disjuncts, International Joint Conference on Neural Networks, IEEE [E2]
no DRO entry yet for this publication

1998 School of Information Technology

Frayman, Y. and Wang, L. (1998) Data Mining Using Dynamically Constructed Recurrent Fuzzy Neural Networks, "Research and Development in Knowledge Discovery and Data Mining, Second Pacific-Asia Conference", pp. 122-131, Springer-Verlag, "Berlin, Germany" [E1]
no DRO entry yet for this publication

Frayman, Y. and Wang, L. (1998) Backup Rolls Eccentricity Control in Cold Rolling Mills Using Dynamically Constructed Recurrent Fuzzy Neural Networks, Proceedings of the Ninth Australian Conference on Neural Networks (ACNN '98), pp. 26-30, University of Queensland, Brisbane [E1]
no DRO entry yet for this publication

Frayman, Y. and Wang, L. (1998) Dynamically Constructed Recurrent Fuzzy Neural Network for Cold Rolling Mill Thickness Control, Poster Proceedings of the 11th Australian Joint Conference on Artificial Intelligence, pp. 15-23, Griffith University, "Brisbane, Queenland, Australia" [E1]
no DRO entry yet for this publication

Frayman, Y. and Wang, L. (1998) Robust Control of Continuous Polymerisation Reactor by Dynamically Constructed Recurrent Fussy Network, 4th International Conference on Information Systems. Analysis and Synthesis, pp. 646-651, International Institute for Informatics and System, "Orlando, Florida, USA" [E2]
no DRO entry yet for this publication

1997 School of Information Technology

Frayman, Y. and Wang, L. (1997) A Fuzzy Neural Approach to Speed Control of An Elastic Two-Mass System, Proceedings of International Conference on Computational Intelligence and Multimedia Applications, pp. 341-345, B.Verma and X. Yao [E1]
no DRO entry yet for this publication

Wang, L. and Frayman, Y. (1997) Torsional Vibration Control of Tandem Cold Rolling Mill Spindles: A Fuzzy Neural Approach, Australia Pacific Forum on Intelligent Processing and Manufacturing of Materials, pp. 89-94, Watson Ferguson and Co., Brisbane [L2]
no DRO entry yet for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2006: $63,885
  • 2005: $62,693
  • 2004: $61,404

Research Income - Other Funding Sources

Frayman, Y. Melt Handling and Dross Generation, CRC_CAST Cooperative Research Centre CAST CRC Limited, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2011: $86,590
  • 2010: $143,996
  • 2009: $152,192
  • 2008: $36,674
  • 2007: $81,677

Higher Degree by Research Completions supervised by Yakov Frayman

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Saturday 20th December 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011