Research Output for Tim Hilditch
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
2013 School of Engineering
Malekjani, Shokoufeh, Hodgson, Peter D., Stanford, Nicole E. and Hilditch, Timothy B. (2013) The role of shear banding on the fatigue ductility of ultrafine-grained aluminium, Scripta materialia, vol. 68, no. 5, pp. 269-272, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: Not taggedDRO entry for this publication
Pereira, Michael P., Weiss, Matthias, Rolfe, Bernard F. and Hilditch, Tim B. (2013) The effect of the die radius profile accuracy on wear in sheet metal stamping, International journal of machine tools and manufacture, vol. 66, pp. 44-53, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3606 – Scopus EID: Not tagged2012 School of Engineering
Fabijanic, D. M. and Hilditch, T. B. (2012) Effect of carburising on geometrical control during quenching of martensitic sheet steel channels, Journal of materials processing technology, vol. 212, no. 8, pp. 1802-1809, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84860265464Hilditch, Timothy, Beladi, Hossein, Hodgson, Peter D. and Stanford, Nicole (2012) Role of microstructure in the low cycle fatigue of multi-phase steels, Materials science and engineering : A, vol. 534, pp. 288-296, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: Not taggedMalekjani, Shokoufeh, Hodgson, Peter, D., Cizek, Pavel and Hilditch, Timothy, B. (2012) Strain rate effect on the cyclic deformation response of UFG Al alloys, Materials science and engineering A, vol. 548, pp. 69-74, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84860546892
Citation counts:Scopus - 1,
Thomson - 1
2012 Institute for Frontier Materials
Taylor, A. S., Weiss, M., Hilditch, T., Stanford, N. and Hodgson, P. D. (2012) Formability of cryo-rolled aluminium in uniaxial and biaxial tension, Materials science and engineering A, vol. 555, pp. 148-153, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84864538037
Citation counts:2011 School of Engineering
Kashef, Sadaf, Asgari, Alireza, Hilditch, Timothy B., Yan, Wenyi*, Goel, Vijay K.* and Hodgson, Peter D. (2011) Fatigue crack growth behavior of titanium foams for medical applications, Materials science and engineering a, vol. 528, no. 3, pp. 1602-1607, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: Not tagged
Citation counts:2011 Institute for Frontier Materials
Gao, Wei-min, Fabijanic, Daniel, Hilditch, Tim and Kong, Ling-xue (2011) Integrated fluid-thermal-structural numerical analysis for the quenching of metallic components, Shanghai Jiaotong university (science), vol. 16, no. 2, pp. 137-140, Shanghai Jiaotong Daxue, Shanghai, China [C1]
ERA journal ID: Not matching ERA journal listMalekjani, Shokoufeh, Hodgson, Peter D., Cizek, Pavel and Hilditch, Timothy B. (2011) Cyclic deformation response of ultrafine pure Al, Acta materialia, vol. 59, no. 13, pp. 5358-5367, Elsevier BV, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: Not tagged
Citation counts:Malekjani, Shokoufeh, Hodgson, Peter D., Cizek, Pavel, Sabirov, Ilchat and Hilditch, Timothy B. (2011) Cyclic deformation response of UFG 2024 Al alloy, International journal of fatigue, vol. 33, no. 5, pp. 700-709, Elsevier, Oxford, U. K. [C1]
ERA journal ID: 3676 – Scopus EID: Not tagged
Citation counts:2010 School of Engineering
Kashef, Sadaf, Asgari, Alireza, Hilditch, Tim B., Yan, Wenyi*, Goel, Vijay K.* and Hodgson, Peter D. (2010) Fracture toughness of titanium foams for medical applications, Materials science and eMaterials science and engineering A : structural materials : properties, microstructures and processing, vol. 527, no. 29-30, pp. 7689-7693, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-77957674254
Citation counts:Pereloma, Elena V.*, Timokhina, Ilana B., Hilditch, Tim B. and Hodgson, Peter D. (2010) Effect of manufacturing process on the final properties of advanced high strength steels for automotive applications, Materials science forum, vol. 638-642, pp. 148-153, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list2009 School of Engineering
Hilditch, Tim, Atwell, Dale and Beer, Aiden G. (2009) Effect of grain size on the performance of extruded magnesium alloy tubes in three-point bending, Materials science forum, vol. 618-619, pp. 523-526, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal listHilditch, Timothy B., Timokhina, Ilana B., Robertson, Leigh T., Pereloma, Elena V.* and Hodgson, Peter D. (2009) Cyclic deformation of advanced high-strength steels : mechanical behavior and microstructural analysis, Metallurgical and materials transactions A : physical metallurgy and materials science, vol. 40, no. 2, pp. 342-353, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-59149101222
Citation counts:Hilditch, Tim, Atwell, Dale, Easton, Mark* and Barnett, Matthew Robert (2009) Performance of wrought aluminium and magnesium alloy tubes in three-point bending, Materials and design, vol. 30, no. 7, pp. 2316-2322, Elsevier, Oxford, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-67349091160
Citation counts:Weiss, Matthias, Pereira, Michael, Rolfe, B. F. and Hilditch, Tim (2009) Wear mechanisms in forming of HSS and AHSS, in Levy, B.S.; Matlock, D.K. and Van Tyne, C.J. (eds), IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the 2009 International Deep-Drawing Research Group annual conference, pp. 691-702, IDDRG, Golden, Colo. [E1.1]
2008 Centre for Material and Fibre Innovation
Easton, Mark*, Beer, Aiden, Barnett, Matthew, Davies, Chris*, Dunlop, Gordon*, Durandet, Yvonne*, Blacket, Stuart*, Hilditch, Tim and Beggs, Peter* (2008) Magnesium alloy applications in automotive structures, Journal of metals, vol. 60, no. 11, pp. 57-62, Springer, Warrendale, Pa. [C1]
ERA journal ID: 4030 – Scopus EID: 2-s2.0-56249139705
Citation counts:Robertson, L.T, Hilditch, T.B and Hodgson, P.D (2008) The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel, International journal of fatigue, vol. 30, no. 4, pp. 587-594, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 3676 – Scopus EID: 2-s2.0-38149058125
Citation counts:Hilditch, Timothy B., Timokhina, Ilana B., Robertson, Leigh T., Pereloma, Elena V.* and Hodgson, Peter D. (2008) Microstructural analysis of pre-strained TRIP steel after fatigue testing, International Conference on New Developments in Advanced High-Strength Sheet Steels. Proceedings, pp. 295-303, Ronald E. Ashburn, USA [E2]
2007 Centre for Material and Fibre Innovation
Hilditch, Tim, Toman, S. and Fabijanic, Dan (2007) Post-forming heat treatment of dual phase steel components for automotive applications using a fluid bed furnace, Materials forum, vol. 31, pp. 24-30, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal listHilditch, Tim, Speer, John* and Matlock, David* (2007) Effect of susceptibility to interfacial fracture on fatigue properties of spot-welded high strength sheet steel, Materials and design, vol. 28, no. 10, pp. 2566-2576, Scientific and Technical Press, Reigate, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-34347329212
Citation counts:Hilditch, Tim, Speer, J.* and Matlock, D.* (2007) Influence of low-strain deformation characteristics of high strength sheet steel on curl and springback in bend-under-tension tests, Journal of materials processing technology, vol. 182, no. 1-3, pp. 84-94, Elsevier BV, Amsterdam, The Netherlands [C1.1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-33750611022
Citation counts:Mullins, Jonathan, Hodgson, Peter and Hilditch, Tim (2007) Stress response of advanced high strength steels using tapered tensile specimens and digital image correlation method, MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 85-98, MS & T, Detroit, Michigan [E2]
2006 Centre for Material and Fibre Innovation
Robertson, L., Hilditch, Tim and Hodgson, Peter (2006) Low-cycle fatigue properties of TRIP steel, MS & T 2006 : Proceedings of the Materials Science & Technology 2006 Conference and Exhibition (MS&T'06), pp. 63-73, MS & T, Cincinnati, Oh. [E2]
2005 School of Engineering
Hilditch, Tim and Hodgson, Peter (2005) Development of the sheared edge in the trimming of steel and light metal sheet, part 2 - mechanisms and modelling, Journal of materials processing technology, vol. 169, no. 2, pp. 192-198, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-26444559018
Citation counts:Hilditch, Tim and Hodgson, Peter (2005) Development of the sheared edge in the trimming of steel and light metal sheet, part 1 - experimental observations, Journal of materials processing technology, vol. 169, no. 2, pp. 184-191, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-26444459352
Citation counts:2004 Centre for Material and Fibre Innovation
Hilditch, Tim, Speer, John* and Matlock, David* (2004) Influence of volume change on plasticity relationships in TRIP sheet steels, Steel grips : journal of steel and related materials, vol. 2, no. 3, pp. 209-211, G R I P S Media GmbH, Bad Harzburg, Germany [C1.1]
ERA journal ID: 5018 – Scopus EID: Not tagged2004 External
Hilditch, Tim B.*, Levy, B. S.*, Siekirk, J.* and Matlock, David K.* (2004) Experimental evaluation of curl and tensile properties of advanced high strength sheet steels, SAE transactions : journal of materials & manufacturing., vol. 113, no. 5, pp. 457-466, S A E Inc., Warrendale, PA [C3.1]
ERA journal ID: 44869 – Scopus EID: Not tagged
Grants and Consultancies
All years
Research Income - Industry and Other Funding
Hilditch, T. Non-destructive Evaluation of Carbon Fibre Wheels [V]
- 2011: $21,521
Research Income - Other Funding Sources
Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]
- 2011: $49,894
- 2010: $109,344
- 2009: $169,178
- 2008: $162,614
Hilditch, T and Hodgson, P. Auto CRC - MDO C4-04, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]
- 2011: $0
- 2010: $10,981
- 2008: $20,132
Dingle, M, Hilditch, T, Rolfe, B, Will, F, Balasingh Sugirtharaj, P, Lenz, S and Fiedler, K. Development of a lightweight modular mixed material vehicle platform - C2-23, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]
- 2011: $178,449
- 2010: $122,815
Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]
- 2010: $8,918
- 2009: $21,800
Hilditch, T and Hodgson, P. Auto CRC Initial Project 14, Rapid Tooling Development, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]
- 2008: $20,441
- 2007: $56,910
Higher Degree by Research Completions supervised by Tim Hilditch
No completions found or audited.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Wednesday 22nd May 2013 10:04pm
