Research Services Division

Deakin Research

Research Output for Peter Hodgson

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2014 Institute for Frontier Materials

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) An experimental investigation of edge strain and bow in roll forming a V-section, Materials science forum, vol. 773-774, pp. 153-159, Trans Tech Publications, Durnten-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Beladi, Hossein, Rohrer, Gregory S.*, Rollett, Anthony D.*, Tari, Vahid* and Hodgson, Peter D. (2014) The distribution of intervariant crystallographic planes in a lath martensite using five macroscopic parameters, Acta materialia, vol. 63, pp. 86-98, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84886815210
DRO entry for this publication

Kazum, O.*, Bobby, Kannan M.*, Beladi, H., Timokhina, I.B., Hodgson, P.D. and Khoddam, S.* (2014) Aqueous corrosion performance of nanostructured bainitic steel, Materials and design, vol. 54, pp. 67-71, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kumar, Apurv, Hodgson, Peter, Gao, Weimin, Das, Subrat and Fabijanic, Dan (2014) Investigating the effect of segregation of particles and pressure gradient on the quality of fluidisation at sub-atmospheric pressures, Powder technology, vol. 254, pp. 137-149, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3918 – Scopus EID: 2-s2.0-84893106930
DRO entry for this publication

Liu, Wei*, Liu, Jun, Chen, Kunfeng*, Ji, Shaomin*, Wan, Yanling*, Zhou, Yichun*, Xue, Dongfeng*, Hodgson, Peter and Li, Yuncang (2014) Enhancing the electrochemical performance of the LiMn2O4 hollow microsphere cathode with a LiNi0.5Mn1.5O4 coated layer, Chemistry : a European journal, vol. 20, no. 3, pp. 824-830, Wiley, London, England [C1]
ERA journal ID: 1329 – Scopus EID: 2-s2.0-84889993439
Citation counts: Thomson - 4
DRO entry for this publication

Wen, Ming, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2014) Fabrication of Ti-Nb-Ag alloy via powder metallurgy for biomedical applications, Materials and design, vol. 56, pp. 629-634, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-84890306761
Citation counts: Scopus - 1
DRO entry for this publication

Yang, Chunhui*, An, Yang, Tort, Marine* and Hodgson, Peter D. (2014) Fabrication, modelling and evaluation of microstructured materials in a digital framework, Computational materials science, vol. 81, pp. 89-97, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-84888295725
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Sensitivity analysis of roll load, torque and material properties in the roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 900-903, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Effect of temper rolling on final shape defects in a V-section roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 896-899, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) The effect of forming strategy on the longitudinal bow in roll forming of advanced high strength steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 876-879, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation about the effect of increasing the number of forming passes on the quality of AHSS roll formed products, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 872-875, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation on the effect of skin passing and roller leveling on the bending behaviour of mild steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 452-455, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Mendiguren, Joseba*, Hanselmanb, Stijn*, Atzemac, Eisso*, Hodgson, Peter, Rolfe, Bernard and Weiss, Matthias (2014) Characterization of a dual phase steel using tensile and free bending tests, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 659-662, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

2013 Institute for Frontier Materials

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2013) Fluidized-bed quenching, in Dossett, J. and Totten, G. E. (eds), ASM Handbook, Volume 4A, Steel Heat Treating Fundamentals and Processes, pp. 238-244, ASM International, Materials Park, Ohio [B1.1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter D. and Weiss, Matthias (2013) Development of an inverse routine to predict residual stresses in the material based on a bending test, Key engineering materials, vol. 554-557, pp. 949-956, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84880550088
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Experimental study into the correlation between the incremental forming and the nature of springback in automotive steels, International journal of materials and product technology, vol. 47, no. 1/2/3/4, pp. 150-161, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893952933
DRO entry for this publication

Beladi, H., Timokhina, I.B., Xiong, X.Y.* and Hodgson, P.D. (2013) A novel thermomechanical approach to produce a fine ferrite and low-temperature bainitic composite microstructure, Acta materialia, vol. 61, no. 19, pp. 7240-7250, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84885608650
DRO entry for this publication

Beladi, Hossein, Cizek, Pavel, Taylor, Adam S. and Hodgson, Peter D. (2013) Effect of substructure characteristics on the dislocation annihilation process during post-deformation annealing, Materials science forum, vol. 753, pp. 76-79, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Cai, M.H., Dhinwal, S. Singh, Han, Q.H., Chao, Q. and Hodgson, P.D. (2013) Gradient ultrafine ferrite and martensite structure and its tensile properties by asymmetric rolling in low carbon microalloyed steel, Materials Science and Engineering : A, vol. 583, pp. 205-209, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84883495016
DRO entry for this publication

Cizek, Pavel, Beladi, Hossein, Taylor, Adam S. and Hodgson, Peter D. (2013) Orientation dependence of the substructure characteristics in a Ni- 30%Fe austenitic alloy deformed in hot torsion, Materials science forum, vol. 753, pp. 54-57, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Deepika, Hait, S.K.*, Christopher, J.*, Chen, Y., Hodgson, P.D. and Tuli, D.K.* (2013) Preparation and evaluation of hydrophobically modified core shell calcium carbonate structure by different capping agents, Powder technology, vol. 235, pp. 581-589, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3918 – Scopus EID: 2-s2.0-84871529635
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Dumee, Ludovic, He, Li, Hill, Matthew*, Zhu, Bo*, Duke, Mikel*, Schutz, Jurg*, She, Fengshua, Wang, Huanting*, Gray, Stephen*, Hodgson, Peter and Kong, Lingxue (2013) Seeded growth of ZIF-8 on the surface of carbon nanotubes towards self-supporting gas separation membranes, Journal of materials chemistry A, vol. 1, no. 32, pp. 9208-9214, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 8, Thomson - 4
DRO entry for this publication

Dumee, Ludovic F., He, Li, Lin, Bao, Ailloux, Francois-Marie, Lemoine, Jean-Baptiste, Velleman, Leonara, She, Fenghua, Duke, Mikel C.*, Orbell, John D.*, Erskine, Gilbert*, Hodgson, Peter D., Gray, Stephen* and Kong, Lingxue (2013) The fabrication and surface functionalization of porous metal frameworks : a review, Journal of materials chemistry A, vol. 1, no. 48, pp. 15185-15206, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Dumee, Ludovic, Sears, Kallista*, Mudie, Stephen*, Kirby, Nigel*, Skourtis, Chris, Mcdonnell, Jill*, Lucas, Stuart*, Schutz, Jurg*, Finn, Niall*, Huynh, Chi*, Hawkins, Stephen*, Kong, Lingxue, Hodgson, Peter, Duke, Mikel* and Gray, Stephen* (2013) Characterization of carbon nanotube webs and yarns with small angle X-ray scattering : revealing the yarn twist and inter-nanotube interactions and alignment, Carbon, vol. 63, pp. 562-592, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1412 – Scopus EID: 2-s2.0-84879874373
DRO entry for this publication

Farhoumand, A.*, Hodgson, P.D. and Khoddam, S.* (2013) Finite element analysis of plastic deformation in variable lead axisymmetric forward spiral extrusion, Journal of materials science, vol. 48, no. 6, pp. 2454-2461, Springer, Berlin, Germany [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-84879550950
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Farhoumand, A.*, Hodgson, P.D., Khoddam, S.* and Fang, X.Y.* (2013) Multiple pass axi-symmetrical forward spiral extrusion of interstitial-free (IF) steel, Materials science and engineering A, vol. 579, pp. 217-225, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84878686349
Citation counts: Scopus - 1
DRO entry for this publication

Ghaderi, Alireza, Hodgson, Peter D. and Barnett, Matthew R. (2013) Microstructure and texture development in Ti-5Al-5Mo- 5V-3Cr alloy during cold rolling and annealing, Key engineering materials, vol. 551, pp. 210-216, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84880124595
DRO entry for this publication

Han, Qihang, Kang, Yonglin*, Hodgson, Peter D. and Stanford, Nicole (2013) Quantitative measurement of strain partitioning and slip systems in a dual-phase steel, Scripta materialia, vol. 69, no. 1, pp. 13-16, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84876929926
Citation counts: Scopus - 3, Thomson - 1
DRO entry for this publication

Hodgson, P.D., Timokhina, I.B. and Beladi, H. (2013) Multiscale microstructure engineering of steels, Materials science and technology, vol. 29, no. 10, pp. 1152-1157, Maney Publishing, Leeds, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Hodgson, Peter D., Mukherjee, Subrata, Beladi, Hossein, Xiong, Xiang-Yuan* and Timokhina, Ilana (2013) Atomic scale investigation of solutes and precipitates in high strength steels, Materials science forum, vol. 762, pp. 14-21, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kashef, Sadaf, Asgari, Alireza, Hilditch, Timothy B., Yan, Wenyi*, Goel, Vijay K.*, Quadbeck, Peter* and Hodgson, Peter D. (2013) Fracture mechanics of stainless steel foams, Materials science and engineering : A, vol. 578, pp. 115-124, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84879258404
DRO entry for this publication

Kumar, Apurv, Das, Subrat, Fabijanic, Daniel, Gao, Weimin and Hodgson, Peter (2013) Bubble-wall interaction for asymmetric injection of jets in solid-gas fluidized bed, Chemical Engineering Science, vol. 101, no. 41537, pp. 56-68, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3858 – Scopus EID: 2-s2.0-84880297023
DRO entry for this publication

Liu, Jun*, Liu, Wei*, Chen, Kunfeng*, Ji, Shaomin*, Zhou, Yichun*, Wan, Yanling*, Xue, Dongfeng*, Hodgson, Peter and Li, Yuncang (2013) Facile synthesis of transition-metal oxide nanocrystals embedded in hollow carbon microspheres for high-rate lithium-ion-battery anodes, Chemistry : a European journal, vol. 19, no. 30, pp. 9811-9816, Wiley, London, England [C1]
ERA journal ID: 1329 – Scopus EID: 2-s2.0-84879061095
DRO entry for this publication

Liu, Jun, Liu, Wei*, Ji, Shaomin*, Zhou, Yichun*, Hodgson, Peter and Li, Yuncang (2013) Electrospun spinel LiNi0.5Mn1.5O4 hierarchical nanofibers as 5 v cathode materials for lithium-ion batteries, ChemPlusChem, vol. 78, no. 7, pp. 636-641, Wiley, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Liu, Jun, Wan, Yanling*, Liu, Wei*, Ma, Zengsheng*, Ji, Shaomin*, Wang, Jinbing*, Zhou, Yichun*, Hodgson, Peter and Li, Yuncang (2013) Mild and cost-effective synthesis of iron fluoride-graphene nanocomposites for high-rate Li-ion battery cathodes, Journal of materials chemistry A, vol. 1, no. 6, pp. 1969-1975, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 12, Thomson - 10
DRO entry for this publication

Liu, Jun, Liu, Chunping*, Wan, Yanling*, Li, Wei*, Ma, Zengsheng*, Ji, Shaomin*, Wang, Jinbing*, Zhou, Yichun*, Hodgson, Peter and Li, Yuncang (2013) Facile synthesis of NiCo2O4 nanorod arrays on Cu conductive substrates as superior anode materials for high-rate Li-ion batteries, CrystEngComm, vol. 15, no. 8, pp. 1578-1585, Royal Society of Chemistry, Cambridge, England [C1]
ERA journal ID: 34317 – Scopus EID: 2-s2.0-84873296156
Citation counts: Scopus - 19, Thomson - 19
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Stanford, Nicole E. and Hilditch, Timothy B. (2013) The role of shear banding on the fatigue ductility of ultrafine-grained aluminium, Scripta materialia, vol. 68, no. 5, pp. 269-272, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84871716799
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Stanford, Nicole E. and Hilditch, Timothy B. (2013) Shear bands evolution in ultrafine-grained aluminium under cyclic loading, Scripta materialia, vol. 68, no. 10, pp. 821-824, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84875214906
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Malekjani, Shokoufeh, Timokhina, Ilana B., Wang, Jiangting, Hodgson, Peter D. and Stanford, Nicole E. (2013) Static recrystallization of strip cast alloys in the presence of complex nano-sulfide and nitride precipitates, Materials science and engineering A, vol. 581, pp. 39-47, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84879489763
DRO entry for this publication

Mandal, Gopi K.*, Stanford, Nicole, Hodgson, Peter and Beynon, John H.* (2013) Static recrystallisation study of as-cast austenitic stainless steel, Materials science and engineering A, vol. 576, pp. 118-125, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84877030008
DRO entry for this publication

Mukherjee, S., Timokhina, I.B., Zhu, C.*, Ringer, S.P.* and Hodgson, P.D. (2013) Three-dimensional atom probe microscopy study of interphase precipitation and nanoclusters in thermomechanically treated titanium-molybdenum steels, Acta materialia, vol. 61, no. 7, pp. 2521-2530, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84875268170
Citation counts: Scopus - 5
DRO entry for this publication

Mukunthan, Kannappar, Hodgson, Peter Damian, Strezov, Les* and Stanford, Nicole (2013) Solidification behaviour and microstructural development of ironbased alloys under conditions pertinent to strip casting - 200 series stainless steels, ISIJ international, vol. 53, no. 12, pp. 2152-2159, Nippon Tekko Kyokai, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-84893237894
DRO entry for this publication

Mukunthan, Kannappar, Hodgson, Peter Damian, Sellamuthu, Prabhukumar, Strezov, Les*, Durandet, Yvonne* and Stanford, Nicole (2013) Castability and microstructural development of iron-based alloys under conditions pertinent to strip casting : specialty Fe-Cr-Al alloys, ISIJ international, vol. 53, no. 10, pp. 1803-1811, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-84887456794
DRO entry for this publication

Mushahary, Dolly, Sravanthi, Ragamouni*, Li, Yuncang, Kumar, Mahesh J., Harishankar, Nemani*, Hodgson, Peter D., Wen, Cuie* and Pande, Gopal* (2013) Zirconium, calcium, and strontium contents in magnesium based biodegradable alloys modulate the efficiency of implant-induced osseointegration, International journal of nanomedicine, vol. 8, no. 1, pp. 2887-2902, Dove Medical Press, Auckland, New Zealand [C1]
ERA journal ID: 123836 – Scopus EID: 2-s2.0-84881502254
Citation counts: Scopus - 1
DRO entry for this publication

Orlov, Dmitry*, Lapovok, Rimma*, Toth, Laszlo S*, Timokhina, Ilana B, Hodgson, Peter D, Haldar, Arunansu* and Bhattacharjee, Debashish* (2013) Asymmetric rolling of interstitial-free steel using differential roll diameters. Part II : microstructure and annealing effects, Metallurgical and materials transactions A, vol. 45, no. 1, pp. 447-454, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84882544715
DRO entry for this publication

Orlov, Dmitry*, Pougis, Arnaud*, Lapovok, Rimma*, Toth, Laszlo S.*, Timokhina, Ilana B., Hodgson, Peter D., Haldar, Arunansu* and Bhattacharjee, Debashish* (2013) Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I : mechanical properties and deformation textures, Metallurgical and materials transactions A, vol. 44, no. 9, pp. 4346-4359, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84881086738
Citation counts: Scopus - 4
DRO entry for this publication

Qiu, J.A.*, Wu, K.M.*, Li, J.H.*, Hodgson, Peter, Hou, T.P.* and Ding, Q.F.* (2013) Effect of silicon on ultra-low temperature toughness of Nb–Ti microalloyed cryogenic pressure vessel steels, Materials characterization, vol. 83, pp. 123-128, Elsevier, Philadelphia, Pa. [C1]
ERA journal ID: 4805 – Scopus EID: 2-s2.0-84880294100
DRO entry for this publication

Rakha, Khushboo, Beladi, Hossein, Timokhina, Ilana, Xiong, Xiangyuan*, Kabra, Saurabh*, Liss, Klaus-Dieter* and Hodgson, Peter (2013) On low temperature bainite transformation characteristics using in-situ neutron diffraction and atom probe tomography, Materials science and engineering A, vol. 589, pp. 303-309, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84886105805
DRO entry for this publication

Sabirov, I.*, Yang, C.*, Mullins, J. and Hodgson, P. D. (2013) A theoretical study of the structure–property relations in ultra-fine metallic materials with fractal microstructures, Materials science and engineering A, vol. 559, pp. 543-548, Elsevier S. A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84867743658
Citation counts: Scopus - 2
DRO entry for this publication

Sellamuthu, Prabhukumar, Stanford, Nicole and Hodgson, Peter Damian (2013) Recrystallization kinetic behavior of copper-bearing strip cast steel, Steel research international, vol. 84, no. 12, pp. 1273-1280, Wiley, London, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Sellamuthu, P., Collins, P.K., Hodgson, P.D. and Stanford, N. (2013) Correlation of tensile test properties with those predicted by the shear punch test, Materials and design, vol. 47, pp. 258-266, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4961 – Scopus EID: Not tagged
Citation counts: Thomson - 1
DRO entry for this publication

Sista, Subhash, Wen, Cuie*, Hodgson, Peter D. and Pande, Gopal* (2013) Expression of cell adhesion and differentiation related genes in MC3T3 osteoblasts plated on titanium alloys : role of surface properties, Materials science and engineering C, vol. 33, no. 3, pp. 1573-1582, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 5055 – Scopus EID: 2-s2.0-84873406853
Citation counts: Scopus - 3, Thomson - 1
DRO entry for this publication

Sista, Subhash, Nouri, Alireza, Li, Yuncang, Wen, Cuie*, Hodgson, Peter D. and Pande, Gopal* (2013) Cell biological responses of osteoblasts on anodized nanotubular surface of a titanium-zirconium alloy, Journal of biomedical materials research - Part A, vol. 101, no. 12, pp. 3416-3430, Wiley, London, England [C1]
ERA journal ID: 5052 – Scopus EID: 2-s2.0-84875857735
Citation counts: Thomson - 2
DRO entry for this publication

Taylor, A.S., Weiss, M., Hilditch, T., Hodgson, P.D. and Stanford, N. (2013) Cryo-rolling and formability of 2024 aluminium, Materials science forum, vol. 765, pp. 434-438, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Taylor, A.S. and Hodgson, P.D. (2013) Recrystallization of 304SS during and after high strain rate deformation, Materials science forum, vol. 753, pp. 403-406, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Timokhina, Ilana, Beladi, Hossein, Xiong, Xiang-Yuan* and Hodgson, Peter D. (2013) On the low temperature strain aging of bainite in the TRIP steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 44, no. 11, pp. 5177-5191, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84879735035
DRO entry for this publication

Wang, Jian*, Liu, Jun, Zhou, Yichun*, Hodgson, Peter and Li, Yuncang (2013) One-pot facile synthesis of hierarchical hollow microspheres constructed with MnO2 nanotubes and their application in lithium storage and water treatment, RSC advances, vol. 3, no. 48, pp. 25937-25943, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Wang, Jian*, Liu, Jun, Xu, Hongbo*, Ji, Shaomin*, Wang, Jinbin*, Zhou, Yichun*, Hodgson, Peter and Li, Yuncang (2013) Gram-scale and template-free synthesis of ultralong tin disulfide nanobelts and their lithium ion storage performances, Journal of materials chemistry A, vol. 1, no. 4, pp. 1117-1122, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 15, Thomson - 14
DRO entry for this publication

Wang, Jiangting, Yang, Chunhui* and Hodgson, Peter D. (2013) Extrinsic size effect in microcompression of polycrystalline Cu/Fe multilayers, Scripta materialia, vol. 69, no. 8, pp. 626-629, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84883049539
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Wang, Yu, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2013) Biocompatibility of TiO2 nanotubes with different topographies, Journal of biomedical materials research : part A, vol. 102, no. 3, pp. 743-751, Wiley, London, England [C1]
ERA journal ID: 5052 – Scopus EID: 2-s2.0-84878355745
DRO entry for this publication

Weiss, M., Taylor, A.S., Hodgson, P.D. and Stanford, N. (2013) Strength and biaxial formability of cryo-rolled 2024 aluminium subject to concurrent recovery and precipitation, Acta materialia, vol. 61, no. 14, pp. 5278-5289, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84879035049
DRO entry for this publication

Wen, Ming, Cizek, Pavel, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2013) Microstructural characteristics of a nanoeutectic Ag-Cu alloy processed by surface mechanical attrition treatment, Scripta materialia, vol. 68, no. 7, pp. 499-502, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84872817266
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Yang, D. K., Cizek, P., Fabijanic, D., Wang, J. T. and Hodgson, P. D. (2013) Work hardening in ultrafine-grained titanium : multilayering and grading, Acta materialia, vol. 61, no. 8, pp. 2840-2852, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84875433694
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Yang, D.K., Wang, J.T., Fabijanic, D., Cizek, P., Li, B.S., Lu, J.Z.* and Hodgson, P.D. (2013) Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening, Materials science and engineering A, vol. 560, pp. 339-342, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84869089175
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Yang, D.K., Cizek, P., Fabijanic, D. and Hodgson, P.D. (2013) On the deformation mechanism of ultrafine-grained titanium with multilayered hierarchical structure, Materials science and engineering A, vol. 582, no. 41557, pp. 162-169, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84881248148
Citation counts: Scopus - 1
DRO entry for this publication

Yang, D.K. and Hodgson, P.D. (2013) Tough ultrafine-grained Ti through multilayering and grading, Scripta materialia, vol. 68, no. 5, pp. 309-312, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84871718159
Citation counts: Scopus - 1, Thomson - 2
DRO entry for this publication

Zhou, Ying-Long*, Li, Yuncang, Luo, Dong-Mei*, Wen, Cuie* and Hodgson, Peter (2013) Microstructures, mechanical properties and in vitro corrosion behaviour of biodegradable Mg-Zr-Ca alloys, Journal of materials science, vol. 48, no. 4, pp. 1632-1639, Springer, Berlin, Germany [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-84871776379
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Asgari, Alireza, Ghadbeigi, Hassan*, Pinna, Chrostophe* and Hodgson, Peter D. (2013) Multiscale modelling of stress and strain partitioning in high strength dual phase steels, Computer methods in materials science, vol. 12, pp. 163-174, AKAPIT, Lodz, Poland [C2]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Mushahary, D., Wen, C.*, Kumar, J. M.*, Harishankar, N.*, Pande, G.*, Hodgson, P. and Li, Y. (2013) Effect of Collagen type-I on the rate of osseointegration of Ca-containing biodegradable Mg-Zr based alloys, European cells and materials, vol. 26, no. Suppl. 6, p. 22, Swiss Society for Biomaterials, Davos, Switzerland [C2]
ERA journal ID: 2331 – Scopus EID: 2-s2.0-84892507289
Citation counts: Thomson - 22
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) A first step towards in-line shape compensation for roll forming applications, in unknown (ed.), IDDRG 2013 : Proceedings of the 2013 International Deep-Drawing Research Group annual conference, pp. 93-97, IDDRG, Zurich, Switzerland [E1]
DRO entry for this publication

Badr, Ossama Mamdouh, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) The numerical investigation of the material behavior of high strength sheet materials in incremental forming, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMIFORM 2013 : Proceedings of Numerical Methods in Industrial Forming Processes 2013 international conference, pp. 513-519, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Kumari, Apurv, Hodgson, Peter, Gao, Weimin, Fabijanic, Daniel and Das, Subrat (2013) Drag models comparison by single injection in vacuum fluidised beds, in Unknown (ed.), ICMF 2013 : Proceedings of the International Conference on Multiphase Flow, pp. 1-6, ICMF, Jeju, Korea [E1]
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Stanford, Nicole E. and Hilditch, Timothy B. (2013) A comparison of low cycle fatigue behaviour of UFG Al produced by different rolling techniques, in Unknown (ed.), TMS 2013 : 142nd Annual Meeting & Exhibition : Annual Meeting Supplemental Proceedings, pp. 413-419, Wiley - Blackwell, Hoboken, NJ [E2]
DRO entry for this publication

Badr, Ossama Mamdouth, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Manufacturing structural components made of Ti-6AI-4V at room temperature, in Unknown (ed.), AeroMat 2013 : Proceedings of the 24th Advanced Aerospace Materials and Processes Conference and Exposition, p. 1, AeroMat, Bellevue, Washj. [E3]
DRO entry for this publication

Weiss, Matthias, Cai, Minghui, Hodgson, Peter and Kupke, Andreas (2013) The effect of microstructure on the decrease of the apparent Young's Modulus in DP 780 steel, in Unknown (ed.), Proceedings of the 2013 International Symposium on New Developments in Advanced High Strength Sheet Steels, pp. 6-7, AIST, Vail, Colo. [E3]
DRO entry for this publication

2012 GTP Operations

Xiong, Jianyu, Wang, Yu, An, Yang, Wen, Ming, Ding, Yunfei, Li, Yuncang and Hodgson, Peter (2012) Morphology evolution during annealing and electrical conductivity of titania nanotube films, Advanced materials research, vol. 399-401, pp. 548-551, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-83755225343
DRO entry for this publication

2012 Institute for Frontier Materials

Kashef, Sadaf, Hilditch, Tim, Hodgson, Peter and Asgari, Alireza (2012) Fatigue crack propagation mechanism in open pore metal foams, in Tang, Ping and Zhang, Jim Leor (eds), Fatigue crack growth : mechanisms, behavior and analysis, pp. 191-209, Nova Science Publishers, New York, N.Y. [B1]
DRO entry for this publication

An, Yang, Wen, Cui'e*, Hodgson, Peter D. and Yang, Chunhui (2012) Investigation of cell shape effect on the mechanical behaviour of open-cell metal foams, Computational materials science, vol. 55, no. 5, pp. 1-9, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-84862812332
Citation counts: Scopus - 6
DRO entry for this publication

An, Yang, Wen, Cui'e*, Hodgson, Peter and Yang, Chunhui (2012) Impact response and energy absorption of aluminium foam-filled tubes, Applied mechanics and materials, vol. 152-154, pp. 436-439, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 124777 – Scopus EID: 2-s2.0-84857166187
DRO entry for this publication

Beladi, H., Timokhina, I. B. and Hodgson, P. D. (2012) The formation of ultrafine ferrite and low temperature bainite through thermomechanical processing, Materials science forum, vol. 706-709, pp. 2047-2052, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Cizek, Pavel, Beladi, Hossein and Hodgson, Peter D. (2012) Substructure and texture characteristics of the deformed matrix and dynamically recrystallized grains in a Ni-30%Fe austenitic alloy, Materials science forum, vol. 715-716, pp. 180-185, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2012) Computational simulation of the influence of inert particles on incomplete combustion of methane at a low air factor, Materials performance and characterization, vol. 1, no. 1, pp. 1-14, ASTM International, Conshohocken, Pa. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Gao Weimin, Kong, Lingxue and Hodgson, Peter (2012) Atomic interaction of functionalized carbon nanotube-based nanofluids with a heating surface and its effect on heat transfer, International journal of heat and mass transfer, vol. 55, no. 19-20, pp. 5007-5015, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3756 – Scopus EID: 2-s2.0-84863513362
DRO entry for this publication

Hilditch, Timothy, Beladi, Hossein, Hodgson, Peter D. and Stanford, Nicole (2012) Role of microstructure in the low cycle fatigue of multi-phase steels, Materials science and engineering : A, vol. 534, pp. 288-296, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84856553502
Citation counts: Scopus - 10
DRO entry for this publication

Hodgson, Peter D., Cizek, Pavel and Beladi, Hossein (2012) New insights into the dynamic and metadynamic recrystallization of austenite, Materials science forum, vol. 715-716, no. 2012, pp. 259-266, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hodgson, P. D., Cizek, P., Taylor, A. S. and Beladi, H. (2012) Texture evolution and softening processes in an austenitic Ni-30Fe alloy subjected to hot deformation and subsequent annealing, Materials science forum, vol. 702-703, pp. 435-438, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hodgson, P. D., Cizek, P., Beladi, H. and Taylor, A. (2012) Microstructure evolution and softening processes occurring during annealing of hot deformed Ni-30Fe austenite, Materials science forum, vol. 706-709, pp. 2134-2139, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kumar, Apurv, Hodgson, Peter, Fabijanic, Daniel and Gao, Weimin (2012) Numerical solution of gas–solid flow in fluidised bed at sub-atmospheric pressures, Advanced powder technology, vol. 23, no. 4, pp. 485-492, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3837 – Scopus EID: 2-s2.0-84864772204
Citation counts: Scopus - 3, Thomson - 1
DRO entry for this publication

Lapovok, R.*, Orlov, D.*, Timokhina, I. B., Pougis, A.*, Toth, L. S.*, Hodgson, P. D., Haldar, A.* and Bhattacharjee, D.* (2012) Asymmetric rolling of interstitial-free steel using one idle roll, Metallurgical and materials transactions A, vol. 43, no. 4, pp. 1328-1340, Springer New York LLC, New York, N. Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84859267324
Citation counts: Scopus - 4
DRO entry for this publication

Li, Yuncang, Wen, Cuie*, Mushahary, Dolly*, Sravanthi, Ragamouni*, Harishankar, Nemani*, Pande, Gopal* and Hodgson, Peter (2012) Mg-Zr-Sr alloys as biodegradable implant materials, Acta biomaterialia, vol. 8, no. 8, pp. 3177-3188, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-84860851616
Citation counts: Thomson - 18
DRO entry for this publication

Li, Yuncang, Wong, C. S., Wen, C.* and Hodgson, P. D. (2012) Biodegradable Mg-Zr-Ca alloys for bone implant materials, Materials technology, vol. 27, no. 1, pp. 49-51, Maney Publishing, Leeds, U. K. [C1]
ERA journal ID: 4806 – Scopus EID: 2-s2.0-84857812909
Citation counts: Scopus - 1
DRO entry for this publication

Li, Yuncang, Han, Chao*, Zhu, Xinkun*, Wen, Cuie* and Hodgson, Peter (2012) Osteoblast cell response to nanoscale SiO2/ZrO2 particulate-reinforced titanium composites and scaffolds by powder metallurgy, Journal of materials science, vol. 47, no. 10, pp. 4410-4414, Springer New York LLC, Secaucus, N. J. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-84859102672
Citation counts: Thomson - 2
DRO entry for this publication

Li, Yuncang, Han, Chao*, Zhu, Xinkun*, Wen, Cuie* and Hodgson, Peter (2012) Nanoscale SiO2/ZrO2 particulate-reinforced titanium composites for bone implant materials, Key engineering materials, vol. 520, pp. 242-247, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84867957444
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Cizek, Pavel and Hilditch, Timothy B. (2012) Strain rate effect on the cyclic deformation response of UFG Al alloys, Materials science and engineering A, vol. 548, pp. 69-74, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84860546892
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Mandal, Gopi K.*, Stanford, Nicole, Hodgson, Peter and Beynon, John H.* (2012) Effect of hot working on dynamic recrystallisation study of as-cast austenitic stainless steel, Materials science and engineering A, vol. 556, pp. 685-695, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84865443430
Citation counts: Scopus - 1, Thomson - 2
DRO entry for this publication

Orlov, Dmitry*, Lapovok, Rimma*, Toth, Laszlo S.*, Timokhina, Ilana B., Hodgson, Peter D., Bhattacharjee, Debashish* and Haldar, Arunansu* (2012) Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel, Materials science forum, vol. 706-709, pp. 2788-2793, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Taylor, A. S., Weiss, M., Hilditch, T., Stanford, N. and Hodgson, P. D. (2012) Formability of cryo-rolled aluminium in uniaxial and biaxial tension, Materials science and engineering A, vol. 555, pp. 148-153, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84864538037
Citation counts: Scopus - 6
DRO entry for this publication

Taylor, A. S., Cizek, P. and Hodgson, P. D. (2012) Orientation dependence of the substructure characteristics in a Ni-30Fe austenitic model alloy deformed in hot plane strain compression, Acta materialia, vol. 60, no. 4, pp. 1548-1569, Elsevier, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84856183593
Citation counts: Scopus - 8, Thomson - 9
DRO entry for this publication

Timokhina, Ilana B., Beladi, Hossein, Xiong, Xiang Y.* and Hodgson, Peter D. (2012) Effect of bake-hardening treatment on the mechanical properties of high strength bainitic steel produced by thermomechanical processing, Materials science forum, vol. 706-709, pp. 2332-2337, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Wang, Jiangting, Hodgson, Peter D. and Yang, Chunhui (2012) Effects of mechanical properties on the contact profile in Berkovich nanoindentation of elastoplastic materials, Journal of materials research, vol. 27, no. 1, pp. 313-319, Cambridge University Press, New York, N.Y. [C1]
ERA journal ID: 4929 – Scopus EID: 2-s2.0-84862966382
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Wang, Yu, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2012) Preparation of titanium/strontia composite by powder metallurgy for biomedical application, Key engineering materials, vol. 520, pp. 248-253, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84867922601
DRO entry for this publication

Weiss, Matthias, Marnette, Jascha, Wolfram, Preston*, Larranaga, Jon* and Hodgson, Peter (2012) Comparison of bending of automotive steels in roll forming and in a V-die, Key engineering materials, vol. 504-506, pp. 797-802, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84857188464
Citation counts: Scopus - 2
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Hodgson, Peter D. and Yang, Chunhui (2012) Effect of residual stress on the bending of aluminium, Journal of materials processing technology, vol. 212, no. 4, pp. 877-883, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84856000610
Citation counts: Scopus - 4, Thomson - 1
DRO entry for this publication

Wen, Ming, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2012) Mechanical Property and Microstructure of Ti-Ta-Ag alloy for biomedical applications, Key engineering materials, vol. 520, pp. 254-260, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84867942246
DRO entry for this publication

Wen, Ming, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2012) Thermal oxidation behaviour of bulk titanium with nanocrystalline surface layer, Corrosion science, vol. 59, pp. 352-359, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4761 – Scopus EID: 2-s2.0-84862816022
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Wen, M., Wen, C.*, Hodgson, P. D. and Li, Y.C. (2012) Tribological behaviour of pure Ti with a nanocrystalline surface layer under different loads, Tribology letters, vol. 45, no. 1, pp. 59-66, Springer, New York, N. Y. [C1]
ERA journal ID: 3722 – Scopus EID: 2-s2.0-84855255919
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Xiong, Jianyu, Wang, Yu, Li, Yuncang and Hodgson, Peter D. (2012) Phase transformation and thermal structure stability of titania nanotube films with different morphologies, Thin solid films, vol. 526, pp. 116-119, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1156 – Scopus EID: 2-s2.0-84872139383
DRO entry for this publication

Yazdipour, N.* and Hodgson, P. D. (2012) Modelling post-deformation softening kinetics of 304 austenitic stainless steel using cellular automata, Computational materials science, vol. 54, no. 1, pp. 56-65, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-83155185548
Citation counts: Scopus - 3
DRO entry for this publication

Zhou, Ying Long*, Luo, Dong Mei*, Li, Yuncang, Wen, Cui'e and Hodgson, Peter D. (2012) Microstructures and various properties of hot-extruded Mg-Zr-Ca alloys for biomedical applications, Applied mechanics and materials, vol. 232, pp. 162-166, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 124777 – Scopus EID: 2-s2.0-84871573454
DRO entry for this publication

Zhou, Y.L.*, An, J.*, Luo, D.M.*, Hu, W.Y.*, Li, Y.C., Hodgson, P. and Wen, C.E.* (2012) Microstructures and mechanical properties of as cast Mg‐Zr‐Ca alloys for biomedical applications, Materials technology, vol. 27, no. 1, pp. 52-54, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4806 – Scopus EID: 2-s2.0-84863251495
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Farhoumand, A.*, Khoddam, S.* and Hodgson, P.D. (2012) A study of plastic deformation during axisymmetric forward spiral extrusion and its subsequent mechanical property changes, Modelling and simulation in materials science and engineering, vol. 20, no. 8, Institute of Physics Publishing, Bristol, England [C2]
ERA journal ID: 4986 – Scopus EID: Not tagged
DRO entry for this publication

Beladi, Hossein, Timokhina, Ilana B. and Hodgson, Peter D. (2012) Characterization of nano-structured bainitic steel, in Unknown (ed.), UFGNSM 2012 : Proceedings of the 2nd International Conference on Ultrafine Grained and Nanostructured Materials, pp. 1-8, World Scientific, Singapore, Singapore [E1]
DRO entry for this publication

Cai, Minghui, Ding, Hua*, Zhang, Jiansu* and Hodgson, Peter D. (2012) Fabrication, microstructure and mechanical properties of high performance ferrite-bainite steels, in Unknown (ed.), Asia Steel 2012 : Proceedings of the Asia Steel International Conference, pp. 1-6, The Conference, Beijing, China [E1]
DRO entry for this publication

Gao Weimin, Kong, Lingxue and Hodgson Peter (2012) A method and its optimal parameters for the measurement of mass transfer coefficient in heat treatment furnaces, in Unknown (ed.), AMPT 2012 : Proceedings of the 15th Advances in Materials & Processing Technologies Conference, pp. 1-5, University of Wollongong, Wollongong, N. S. W. [E1]
DRO entry for this publication

He, Dongning, Hodgson, Peter and Gao. Weimin (2012) Synthesis and characterization of tin dioxide core-shell structure nanowires, in Unknown (ed.), AMPT 2012 : Proceedings of the 15th Advances in Materials & Processing Technologies Conference, pp. 1-6, University of Wollongong, Wollongong, N. S. W. [E1]
DRO entry for this publication

Kulkarni, R.R.*, Prabhu, N.*, Hodgson, P.D. and Kashyap, B.P.* (2012) Phase dissolution of γ-Mg17Al12 during homogenization of As-Cast AZ80 magnesium alloy and its effect on room temperature mechanical properties, in Suarez, Carlos E. (eds), TMS 2012 : Light metals 2012 : Proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012, pp. 543-548, John Wiley & Sons, Hoboken, N. J. [E1]
DRO entry for this publication

Marnette, Jascha, Weiss, Matthias and Hodgson, Peter (2012) Roll forming cryo-rolled nano-structured aluminium sheet, in Unknown (ed.), AMPT 2012 : Proceedings of the 15th Advances in Materials & Processing Technologies Conference, pp. 1-5, University of Wollongong, Wollongong, N.S.W. [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe Bernard, Hodgson Peter and Weiss Matthias (2012) Effect of roller leveling on the bending behaviour of aged steel strip, in Mori, K.; Pietrzyk, M.; Kusiak, J.; Majta, J.; Hartley, P. and Lin, J. (eds), Metal Forming 2012 : Proceedings of the 14th International Conference on Metal Forming, pp. 699-702, Wiley-VCH, Krakow, Poland [E1]
DRO entry for this publication

Weiss, M, Abeyrathna, B., Marnette, J., Badr, O., Abvabi, A., Jiao, J. and Hodgson, P. (2012) Approach for testing the material behavior in roll forming in a small scale, in Unknown (ed.), IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, pp. 1-6, International Deep-Drawing Research Group, Mumbai, India [E1]
DRO entry for this publication

Rakha, Khushboo, Beladi, Hossein, Kabra, Saurabh*, McTrustry, Sean*, Pullen, Stewart*, Timokhina, Ilana, Hodgson, Peter and Liss, Klaus-Dieter* (2012) In-situ neutron diffraction study of Nanobainitic steels in conjunction with transmission electron microscopy, in Unknown (ed.), TMS 2012 : Supplemental Proceedings for the Magnesium Technology Annual Meeting and Exhibition, p. 1, The Conference, Orlando, Fla. [E3]
DRO entry for this publication

2011 Institute for Frontier Materials

Beladi, Hossein, Timokhina, Ilana B., Mukherjee, Subrata and Hodgson, Peter D. (2011) Ultrafine ferrite formation through isothermal static phase transformation, Acta materialia, vol. 59, no. 10, pp. 4186-4196, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-79955562808
Citation counts: Scopus - 7, Thomson - 5
DRO entry for this publication

Beladi, Hossein, Cizek, Pavel and Hodgson, Peter D. (2011) New insight into the mechanism of metadynamic softening in austenite, Acta materialia, vol. 59, no. 4, pp. 1482-1492, Elsevier BV, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-78651406506
Citation counts: Scopus - 6, Thomson - 4
DRO entry for this publication

Chen, Xiaobo, Li, Yuncang, Hodgson, Peter D. and Wen, Cuie* (2011) In vitro behavior of human osteoblast-like cells (SaOS2) cultured on surface modified titanium and titanium–zirconium alloy, Materials science and engineering : C, vol. 31, no. 7, pp. 1545-1552, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 5055 – Scopus EID: Not tagged
Citation counts: Thomson - 2
DRO entry for this publication

Farhoumand, Alireza*, Hodgson, Peter D. and Khoddam, Shahin* (2011) Finite element analysis of an axi-symmetric forward spiral extrusion of Mg-1.75Mn alloy, Materials science forum, vol. 690, pp. 173-176, Trans Tech Publications, Lausanne, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Gao, W. M., Kong, L. X. and Hodgson, P. D. (2011) Integral approach and numerical improvement to calculate carbon concentration profiles in carburising, Advanced materials research, vol. 264-265, pp. 1494-1499, Trans Tech Publications, Lausanne, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79961034420
DRO entry for this publication

Gao, W. M., Kong, L. X., She, F. H. and Hodgson, P. D. (2011) Particle dynamics and heat transfer at workpiece surface in heat treatment fluidised beds, Advanced materials research, vol. 264-265, pp. 1456-1461, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79961068094
DRO entry for this publication

Gao, Weimin, Li, Weiqi, Zhou, Jin* and Hodgson, Peter (2011) Thermodynamics approach to the hydrogen diffusion and phase transformation in titanium particles, Journal of alloys and compounds, vol. 509, no. 5, pp. 2523-2529, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-78651359251
Citation counts: Scopus - 1
DRO entry for this publication

Hemmerich, E., Rolfe, B., Hodgson, P. D. and Weiss, M. (2011) The effect of pre-strain on the material behaviour and the Bauschinger effect in the bending of hot rolled and aged steel, Materials science and engineering a, vol. 528, no. 9, pp. 3302-3309, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79951682388
Citation counts: Scopus - 6
DRO entry for this publication

Hodgson, Peter, Timokhina, Ilana, Xiong, Xiang*, Adach, Yoshitaka* and Beladi, Hossein (2011) Understanding of the bainite transformation in a nano-structured bainitic steel, Solid state phenomena, vol. 172-174, pp. 123-128, Scitec Publications, Uetikon-Zurich, Switzerland [C1]
ERA journal ID: 1144 – Scopus EID: 2-s2.0-79960902932
Citation counts: Scopus - 4
DRO entry for this publication

Kashef, Sadaf, Asgari, Alireza, Hilditch, Timothy B., Yan, Wenyi*, Goel, Vijay K.* and Hodgson, Peter D. (2011) Fatigue crack growth behavior of titanium foams for medical applications, Materials science and engineering a, vol. 528, no. 3, pp. 1602-1607, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-78650175263
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Khoddam, S.*, Farhoumand, A.* and Hodgson, P. D. (2011) Axi-symmetric forward spiral extrusion, a kinematic and experimental study, Materials science and engineering A, vol. 528, no. 3, pp. 1023-1029, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-78650170253
Citation counts: Scopus - 13, Thomson - 11
DRO entry for this publication

Khoddam, S.*, Hodgson, P. D. and Bahramabadi, M. Jafari* (2011) An inverse thermal-mechanical analysis of the hot torsion test for calibrating the constitutive parameters, Materials and design, vol. 32, no. 4, pp. 1903-1909, Elsevier Ltd, Oxford, U. K. [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-79251638630
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Khoddam, S.*, Farhoumand, A.* and Hodgson, P.D. (2011) Upper-bound analysis of axi-symmetric forward spiral extrusion, Mechanics of materials, vol. 43, no. 11, pp. 684-692, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4980 – Scopus EID: 2-s2.0-80054031282
Citation counts: Scopus - 6, Thomson - 5
DRO entry for this publication

Li, Yuncang., Hodgson, Peter D. and Wen, Cui’e (2011) The effects of calcium and yttrium additions on the microstructure, mechanical properties and biocompatibility of biodegradable magnesium alloys, Journal of materials science, vol. 46, no. 2, pp. 365-371, Springer New York LLC, Secaucus, N. J. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-78650730759
Citation counts: Scopus - 13, Thomson - 13
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Cizek, Pavel and Hilditch, Timothy B. (2011) Cyclic deformation response of ultrafine pure Al, Acta materialia, vol. 59, no. 13, pp. 5358-5367, Elsevier BV, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-79959509807
Citation counts: Scopus - 9, Thomson - 8
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Cizek, Pavel, Sabirov, Ilchat and Hilditch, Timothy B. (2011) Cyclic deformation response of UFG 2024 Al alloy, International journal of fatigue, vol. 33, no. 5, pp. 700-709, Elsevier, Oxford, U. K. [C1]
ERA journal ID: 3676 – Scopus EID: 2-s2.0-79251593097
Citation counts: Scopus - 12, Thomson - 11
DRO entry for this publication

Mukherjee, S., Timokhina, I., Zhu, C. and Hodgson, P. (2011) Effect of thermo-mechanical processing on precipitate formation in next generation HSLA steel, Journal of iron and steel research international, vol. 18, no. 1, pp. 478-481, Gangtie Yanjiu Xuebao, Beijing, China [C1]
ERA journal ID: 4793 – Scopus EID: Not tagged
DRO entry for this publication

Nikhare, C., Hodgson, P. D. and Weiss, M. (2011) Necking and fracture of advanced high strength steels, Materials science and engineering a, vol. 528, no. 6, pp. 3010-3013, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79151482016
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Nouri, A., Hodgson, P.D. and Wen, C.* (2011) Effect of ball-milling time on the structural characteristics of biomedical porous Ti-Sn-Nb alloy, Materials science and engineering c, vol. 31, no. 5, pp. 921-928, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 5055 – Scopus EID: Not tagged
DRO entry for this publication

Sista, Subhash, Wen, Cui’e, Hodgson, Peter D. and Pande, Gopal* (2011) The influence of surface energy of titanium-zirconium alloy on osteoblast cell functions in vitro, Journal of biomedical materials research - part a, vol. 97 A, no. 1, pp. 27-36, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 5052 – Scopus EID: 2-s2.0-79952001957
Citation counts: Scopus - 27
DRO entry for this publication

Taylor, A. S. and Hodgson, P. D. (2011) The post-deformation recrystallization behaviour of 304 stainless steel following high strain rate deformation, Materials science and engineering A, vol. 529, no. 1, pp. 164-169, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-80054079073
Citation counts: Scopus - 3
DRO entry for this publication

Taylor, A. S., Cizek, P. and Hodgson, P. D. (2011) Comparison of 304 stainless steel and Ni-30 wt.% Fe as potential model alloys to study the behaviour of austenite during thermomechanical processing, Acta materialia, vol. 59, no. 14, pp. 5832-5844, Elsevier BV, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-79960431251
Citation counts: Scopus - 6, Thomson - 5
DRO entry for this publication

Taylor, A.S. and Hodgson, P.D. (2011) Dynamic behaviour of 304 stainless steel during high Z deformation, Materials Science and Engineering A, vol. 528, no. 9, pp. 3310-3320, Elsevier S.A., Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79951674039
Citation counts: Scopus - 17, Thomson - 14
DRO entry for this publication

Timokhina, Ilana, Beladi, Hossein, Xiong, Xiang*, Adachi, Yoshitaka* and Hodgson, Peter (2011) Application of advanced experimental techniques for the microstructural characterization of nanobainitic steels, Solid state phenomena, vol. 172-174, pp. 1249-1254, Scitec Publications, Uetikon-Zurich, Switzerland [C1]
ERA journal ID: 1144 – Scopus EID: 2-s2.0-79960907213
Citation counts: Scopus - 1
DRO entry for this publication

Timokhina, I. B., Hodgson, P. D., Ringer, S. P.*, Zheng, R. K.* and Pereloma, E. V.* (2011) Application of advanced analytical techniques to study structure-property relationship of hot rolled high strength low alloy steel, Materials science and technology, vol. 27, no. 1, pp. 305-309, Maney Publishing, West Yorkshire, U. K. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 1
DRO entry for this publication

Timokhina, I. B., Xiong, X. Y.*, Beladi, H., Mukherjee, S. and Hodgson, P. D. (2011) Three-dimensional atomic scale analysis of microstructures formed in high strength steels, Materials science and technology, vol. 27, no. 4, pp. 739-741, Maney Publishing, Leeds, U. K. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 5
DRO entry for this publication

Timokhina, I. B., Beladi, H., Xiong, X. Y.*, Adachi, Y.* and Hodgson, P. D. (2011) Nanoscale microstructural characterization of a nanobainitic steel, Acta materialia, vol. 59, no. 14, pp. 5511-5522, Elsevier BV, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-79960433302
Citation counts: Scopus - 18, Thomson - 13
DRO entry for this publication

Weiss, M., Hemmerich, E.*, Hodgson, P. D. and Rolfe, B. (2011) Effect of thermal treatment on the bending properties of pre-strained carbon steel, Materials science and engineering A, vol. 528, no. 13-14, pp. 4528-4536, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79953289595
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Wen, Ming, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2011) Wear behaviour of pure Ti with a nanocrystalline surface layer, Applied mechanics and materials, vol. 66-68, pp. 1500-1504, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 124777 – Scopus EID: 2-s2.0-79961188843
DRO entry for this publication

Wen, Ming, Li, Yanqiong*, Zhang, Junmin*, Guan, Weiming*, Li, Yuncang, Wen, Cui’e* and Hodgson, Peter (2011) Synthesis and characterization of nanostructured Ag on porous titania, Applied surface science, vol. 257, no. 11, pp. 4836-4843, Amsterdam, Netherlands, Elsevier BV [C1]
ERA journal ID: 1087 – Scopus EID: 2-s2.0-79951671508
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Xiong, Jianyu, Wang, Xiaojian, Li, Yuncang and Hodgson, Peter D. (2011) Interfacial chemistry and adhesion between titanium dioxide nanotube layers and titanium substrates, Journal of physical chemistry C, vol. 115, no. 11, pp. 4768-4772, American Chemical Society, Washington, D. C. [C1]
ERA journal ID: 35015 – Scopus EID: 2-s2.0-79952826217
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Yang, Dengke, An, Yang*, Cizek, Pavel and Hodgson, Peter (2011) Development of adiabatic shear band in cold-rolled titanium, Materials science and engineering : A, vol. 528, no. 12, pp. 3990-3997, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79952707489
Citation counts: Scopus - 6, Thomson - 4
DRO entry for this publication

Zhou, Ying-Long*, Luo, Dong-Mei*, Hu, Wang-Yu*, Li, Yuncang, Hodgson, Peter and Wen, Cuie (2011) Compressive properties of hot-rolled Mg-Zr-Ca alloys for biomedical applications, Advanced materials research, vol. 197-198, pp. 56-59, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79952692850
Citation counts: Scopus - 4
DRO entry for this publication

Zhou, Ying-Long*, Luo, Dong-Mei*, Hu, Wang-Yu*, Li, Yuncang, Hodgson, Peter and Wen, Cuié* (2011) Microstructural characterization and mechanical properties of Mg-Zr-Ca alloys prepared by hot-extrusion for biomedical applications, Advanced science letters, vol. 4, no. 8-10, pp. 2860-2863, American Scientific Publishers, Valencia, Calif. [C1]
ERA journal ID: 125153 – Scopus EID: 2-s2.0-80053898685
Citation counts: Scopus - 9
DRO entry for this publication

Moss, Matthew*, Timokhina, Ilana and Hodgson, Peter (2011) Microstructure-property relationship of the high strength low alloy steels during tensile testing at high strain rates, Journal of iron and steel research international, pp. 1-5, Gangtie Yanjiu Xuebao, Beijing, China [C2]
ERA journal ID: 4793 – Scopus EID: Not tagged
DRO entry for this publication

Timokhina, Ilana, Beladi, Hossein, Xiong, Xiang and Hodgson, Peter (2011) Effect of composition and processing parameters on the formation of nano-bainite in advanced high strength steels, Journal of iron and steel research international, no. 1, pp. 238-241, Gangtie Yanjiu Xuebao, Beijing, China [C2]
ERA journal ID: 4793 – Scopus EID: Not tagged
DRO entry for this publication

Hedge, M. M. Rajath, Wen, C. E., Li, Yuncang and Hodgson, P. D. (2011) Ferromagnetism in compression stressed transitional bulk nanostructured Fe50Al50 alloy, in Mathew, Joseph; Ma, Maode; Tan, Andy and Wijnen, Margot P. C. (eds), Engineering Asset Management and Infrastructure Sustainability : proceedings of the 5th World Congress on Engineering Asset Management, pp. 359-374, Springer, London, U. K. [E1]
DRO entry for this publication

Li, Yuncang, Hodgson, P.D. and Wen, C. (2011) Particulate-reinforced titanium composites for orthopaedic implants, in Fan, Jinghong; Zhang, Junquian; Chen, Haibo and Jin, Zhaohui (eds), ICHMM 2011 : Advances in heterogeneous material mechanics 2011 : proceedings of the Third International Conference on Heterogeneous Material Mechanics : May 22-26, 2011, Shanghai, China, pp. 1131-1135, Destech Publications, Lancaster, Pa. [E1]
DRO entry for this publication

Wen, C.*, Yang, D. K., Li, Y. C. and Hodgson, P.D. (2011) Multimodal nanostructured titanium using severe plastic deformation, in Fan, Jinghong; Zhang, Junquian; Chen, Haibo and Jin, Zhaohui (eds), ICHMM 2011 : Advances in heterogeneous material mechanics 2011 : proceedings of the Third International Conference on Heterogeneous Material Mechanics : May 22-26, 2011, Shanghai, China, pp. 623-629, Destech Publications, Lancaster, Pa. [E1]
DRO entry for this publication

Beladi, H., Cizek, P. and Hodgson, P. D. (2011) Microstructural characterization of the austenite behaviour during metadynamic recrystallization, in Unknown (ed.), ATCOM 2011 : Proceedings of the International Conference on Advances in Analytical Techniques and Characterization of Materials, ATCOM, Ranchi, India [E2]
DRO entry for this publication

Supasuthakul, Jeerachai, Hodgson, Peter D. and Yang, Chunhui (2011) Analytic study on pure bending of metal sheets, in Unknown (ed.), NUMISHEET 2011 : American Institute of Physics Conference Proceedings, pp. 541-548, American Institute of Physics [E2]
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Yang, Chunhui, De Souza, Tim and Hodgson, Peter (2011) Review of approximate analyses of sheet forming processes, in Unknown (ed.), NUMISHEET 2011 : American Institute of Physics Conference Proceedings, pp. 986-996, American Institute of Physics, Seoul, Korea [E2]
DRO entry for this publication

2010 Institute for Frontier Materials

Nouri, Alireza, Hodgson, Peter D. and Wen, Cui'e (2010) Biomimetic porous titanium scaffolds for orthopaedic and dental applications, in Mukherjee, Amitava (eds), Biomimetics learning from nature, pp. 415-450, InTech, Rijek, Croatia [B1]
DRO entry for this publication

An, Yang, Yang, Chunhui, Hodgson, Peter and Wen, Cui'e (2010) Effect of pore size on mechanical properties of titanium foams, Materials science forum, vol. 654-656, pp. 827-830, Trans Tech Publications Ltd., Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Beladi, Hossein, Cizek, Pavel and Hodgson, Peter D. (2010) Texture and substructure development during post-dynamic softening in Ni-30%Fe austenite, Materials science forum, vol. 654-656, pp. 1279-1282, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Beladi, Hossein, Cizek, Pavel and Hodgson, Peter D. (2010) On the characteristics of substructure development through dynamic recrystallization, Acta materialia, vol. 58, no. 9, pp. 3531-3541, Elsever BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-77950069143
Citation counts: Scopus - 14, Thomson - 14
DRO entry for this publication

Beladi, Hossein, Timokhina, Ilana, Mukherjee, Subrata and Hodgson, Peter (2010) Refinement of microstructure in steels through thermomechanical processing, Advanced materials research, vol. 97-101, pp. 2163-2166, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-77951016219
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Beladi, Hossein, Cizek, Pavel and Hodgson, Peter (2010) The mechanism of metadynamic softening in austenite after complete dynamic recrystallization, Scripta materialia, vol. 62, no. 4, pp. 191-194, Pergamon, Kidlington, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-70450031598
Citation counts: Scopus - 12, Thomson - 9
DRO entry for this publication

Beladi, H., Cizek, P. and Hodgson, P.D. (2010) Texture and substructure development during dynamic recrystallization in Ni-30Fe austenite, Materials science forum, vol. 638-642, pp. 2835-2840, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 1
DRO entry for this publication

Dehghan-Manshadi, Ali*, Shokouhi, Alireza and Hodgson, Peter D. (2010) Effect of isothermal dissolution and re-precipitation of austenite on the mechanical properties of duplex structures, Materials science and eMaterials science and engineering A : structural materials : properties, microstructures and processing, vol. 527, no. 24-25, pp. 6765-6770, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-77955923651
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Kashef, Sadaf, Asgari, Alireza, Hilditch, Tim B., Yan, Wenyi*, Goel, Vijay K.* and Hodgson, Peter D. (2010) Fracture toughness of titanium foams for medical applications, Materials science and eMaterials science and engineering A : structural materials : properties, microstructures and processing, vol. 527, no. 29-30, pp. 7689-7693, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-77957674254
Citation counts: Scopus - 10, Thomson - 9
DRO entry for this publication

Khoddam, S.* and Hodgson, P. D. (2010) Post processing of the hot torsion test results using a multi-dimensional modelling approach, Materials and design, vol. 31, no. 5, pp. 2578-2584, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-76549120444
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Khoddam, S.* and Hodgson, P. D. (2010) A heuristic model selection scheme for representing hot flow data using the hot torsion test results, Materials and design, vol. 31, no. 4, pp. 2011-2017, Elsevier, Oxford, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-72749099950
Citation counts: Scopus - 10, Thomson - 10
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Hodgson, Peter and Wen, Cui'e (2010) Effects of structural property and surface modification of Ti6Ta4Sn scaffolds on the response of SaOS2 cells for bone tissue engineering, Journal of alloys and compounds, vol. 494, no. 1-2, pp. 323-329, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-77649191106
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Li, Yuncang, Wong, Cynthia, Xiong, Jianyu, Hodgson, Peter and Wen, Cui'e (2010) Cytotoxicity of titanium and titanium alloying elements, Journal of dental research, vol. 89, no. 5, pp. 493-497, Sage Publications, Inc, Thousand Oaks, Calif. [C1]
ERA journal ID: 32615 – Scopus EID: 2-s2.0-77951141226
Citation counts: Scopus - 39, Thomson - 38
DRO entry for this publication

Li, Yuncang, Li, Meiheng*, Hu, Wangyu*, Hodgson, Peter and Wen, Cui'e (2010) Biodegradable Mg-Ca and Mg-Ca-Y alloys for regenerative medicine, Materials science forum, vol. 654-656, pp. 2192-2195, Trans Tech Publications Ltd., Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 6, Thomson - 6
DRO entry for this publication

Muszka, K.*, Dymek, S.*, Majta, J.* and Hodgson, P. (2010) Microstructure and properties of a C-Mn steel subjected to heavy plastic deformation, Archives of metallurgy and materials, vol. 55, no. 33, pp. 641-645, Akademia Gorniczo-Hutnicza im. Stanislawa Staszica, Krakow, Poland [C1]
ERA journal ID: 44684 – Scopus EID: 2-s2.0-78449305612
Citation counts: Scopus - 1
DRO entry for this publication

Nikhare, Chetan, Asgari, Alireza, Weiss, Matthias and Hodgson, Peter D. (2010) Fracture of DP590 steel : a multi-scale modeling approach, Steel research international, vol. 81, no. 9, pp. 1450-1453, Wiley – VCH Verlag, Weinheim, Germany [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nikhare, Chetan, Weiss, Matthias and Hodgson, Peter D. (2010) Die closing force in low pressure tube hydroforming, Journal of materials processing technology, vol. 210, no. 15, pp. 2238-2244, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-77957653238
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Nouri, Alireza, Hodgson, Peter D. and Wen, Cui'e (2010) Study on the role of stearic acid and ethylene-bis-stearamide on the mechanical alloying of a biomedical titanium based alloy, Metallurgical and materials transactions A – physical metallurgy and materials science, vol. 41, no. 6, pp. 1409-1420, Springer New York LLC, New York, N. Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-77952583479
Citation counts: Scopus - 6, Thomson - 5
DRO entry for this publication

Nouri, Alireza, Hodgson, Peter and Wen, Cui'e (2010) Effect of process control agent on the porous structure and mechanical properties of a biomedical Ti-Sn-Nb alloy produced by powder metallurgy, Acta biomaterialia, vol. 6, no. 4, pp. 1630-1639, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-76949088262
Citation counts: Scopus - 22, Thomson - 21
DRO entry for this publication

Orlov, Dmitry*, Lapovok, Rimma*, Tóth, Laszlo S.*, Timokhina, Ilana B., Hodgson, Peter D., Bhattacharjee, Debashish* and Haldar, Arunansu* (2010) Structure and mechanical properties of asymmetrically rolled IF steel sheet, Materials science forum, vol. 654-656, pp. 1255-1258, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 5
DRO entry for this publication

Pereloma, Elena V.*, Timokhina, Ilana B., Hilditch, Tim B. and Hodgson, Peter D. (2010) Effect of manufacturing process on the final properties of advanced high strength steels for automotive applications, Materials science forum, vol. 638-642, pp. 148-153, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

She, F. H., Nihara, K.*, Gao, W. M., Hodgson, P. D., Jinnai, H.* and Kong, L. X. (2010) 3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis, Desalination, vol. 250, no. 2, pp. 757-761, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 3874 – Scopus EID: 2-s2.0-71849091900
Citation counts: Scopus - 9, Thomson - 8
DRO entry for this publication

Sudharsan, Ranjani, Rolfe, Bernard F. and Hodgson, Peter D. (2010) The indentation behaviour of carbon fibre composite tubes-experiments & modelling, Materials science forum, vol. 654-656, pp. 2616-2619, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Sun, Yu*, Zhang, Haifeng*, Wang, Aimin*, Fu, Huameng*, Hu, Zhuangqi*, Wen, Cui'e and Hodgson, Peter D. (2010) Compressive deformation and damage of Mg-based metallic glass interpenetrating phase composite containing 30-70 vol% titanium, Journal of materials research, vol. 25, no. 11, pp. 2192-2196, Cambridge University Press, New York, N.Y. [C1]
ERA journal ID: 4929 – Scopus EID: 2-s2.0-78049517241
DRO entry for this publication

Supasuthakul, Jeerachai, Hodgson, Peter D., Weiss, Matthias and Yang, Chunhui (2010) Analytical solutions and finite element modelling of deep drawing process for cylindrical metal cups, Key engineering materials, vol. 443, pp. 104-109, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-77955444923
Citation counts: Scopus - 1
DRO entry for this publication

Timokhina, Ilana B., Beladi, Hossein, Xiong, Xiang Yuan*, Pereloma, Elena V.* and Hodgson, Peter D. (2010) Nano-scale analysis of nano-bainite formed in advanced high strength steels, Materials science forum, vol. 654-656, pp. 102-105, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Timokhina, Ilana B., Pereloma, Elena V.*, Ringer, Simon P.*, Zheng, Rongkun* and Hodgson, Peter D. (2010) Characterization of the bake-hardening behavior of transformation induced plasticity and dual-phase steels using advanced analytical techniques, ISIJ international, vol. 50, no. 4, pp. 574-582, Nippon Tekko Kyokai, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-77953632182
Citation counts: Scopus - 16
DRO entry for this publication

Wang, Jiangting, Hodgson, Peter D., Zhang, Jingde*, Yan, Wenyi* and Yang, Chunhui* (2010) Effects of pores on shear bands in metallic glasses : a molecular dynamics study, Computational materials science, vol. 50, no. 1, pp. 211-217, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-77957943792
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Wang, Xiaojian, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2010) Biomimetic modification of porous TiNbZr alloy scaffold for bone tissue engineering, Tissue engineering : part A, vol. 16, no. 1, pp. 309-316, Mary Ann Liebert Publishers, New Rochelle, N.Y. [C1]
ERA journal ID: 3382 – Scopus EID: 2-s2.0-77049102245
Citation counts: Scopus - 22, Thomson - 18
DRO entry for this publication

Wen, Cui'e, Xiong, Jianyu, Li, Yuncang and Hodgson, Peter (2010) Porous shape memory alloy scaffolds for biomedical applications : a review, Physica scripta, vol. T139, no. 014070, pp. 1-8, Institute of Physics Publishing Ltd., London, England [C1]
ERA journal ID: 1014 – Scopus EID: 2-s2.0-77954725539
Citation counts: Scopus - 7, Thomson - 8
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Hodgson, Peter D. and Wen, Cui'e (2010) In vitro osteoblast-like cell proliferation on nano-hydroxyapatite coatings with different morphologies on a titanium-niobium shape memory alloy, Journal of biomedical materials research part A, vol. 95A, no. 3, pp. 766-773, John Wiley & Sons, Inc, Malden, Mass. [C1]
ERA journal ID: 5052 – Scopus EID: 2-s2.0-78249247055
Citation counts: Scopus - 8, Thomson - 10
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2010) Nanohydroxyapatite coating on a titanium–niobium alloy by a hydrothermal process, Acta biomaterialia, vol. 6, no. 4, pp. 1584-1590, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-76949101678
Citation counts: Scopus - 17, Thomson - 17
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2010) Design of a new biocompatible ti-based shape memory alloy and its superelastic deformation behaviour, Materials science forum, vol. 654-656, pp. 2087-2090, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Yang, Dengke, Cizek, Pavel, Hodgson, Peter and Wen, Cui'e (2010) Ultrafine equiaxed-grain Ti/Al composite produced by accumulative roll bonding, Scripta materialia, vol. 62, no. 5, pp. 321-324, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-72149100150
Citation counts: Scopus - 33, Thomson - 31
DRO entry for this publication

Yang, D. K., Hodgson, P. D. and Wen, C. E. (2010) Simultaneously enhanced strength and ductility of titanium via multimodal grain structure, Scripta materialia, vol. 63, no. 9, pp. 941-944, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-77955983930
Citation counts: Scopus - 25, Thomson - 18
DRO entry for this publication

Yang, Dengke, Cizek, Pavel, Hodgson, Peter and Wen, Cui'e (2010) Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium, Acta materialia, vol. 58, no. 13, pp. 4536-4548, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-77956752602
Citation counts: Scopus - 21, Thomson - 17
DRO entry for this publication

Yang, Dengke, Hodgson, Peter and Wen, Cui'e (2010) Effects of deformation-induced heating on bond strength of rolled metal multilayer, Materials science forum, vol. 654-656, pp. 2579-2582, Trans Tech Publications, Stafa-Zurich [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Fabijanic, D. M. and Hodgson, P. D. (2010) Surface alloying of metals using fluid bed reactor, International heat treatment and surface engineering, vol. 4, no. 3, pp. 103-104, Maney Publishing, London, England [C2]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Sudharsan, R., Rolfe, B. F. and Hodgson, P. D. (2010) Modelling the side impact of carbon fiber tubes, in Khalili, Nasser; Valliappan, Somasundaram; Li, Qing and Russell, Adrian (eds), Proceedings of the joint 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, 19-23 July, Sydney, New South Wales, pp. 1-10, IOP Publishing Ltd, Bristol, United Kingdom [E1]
DRO entry for this publication

Sudharsan, Ranjani, Fox, Bronwyn L. and Hodgson, Peter D. (2010) High strain rate tensile properties of rapidly cured woven carbon fibre composites, in Unknown (ed.), Proceedings of the International SAMPE Symposium and Exhibition; SAMPE 2010 conference proceedings, pp. 1-15, Society for the Advancement of Material and Process Engineering, Covina, CA [E1]
DRO entry for this publication

2009 Institute for Frontier Materials

Hodgson, Peter (2009) Laying the foundations for a research career in industry, in Denholm, Carey and Evans, Terry (eds), Beyond doctorates downunder : maximising the impact of your doctorate from Australia and New Zealand, pp. 40-46, ACER Press, Camberwell, Vic. [BN]
DRO entry for this publication

Asgari, S. A., Hodgson, P. D., Yang, C. and Rolfe, B. F. (2009) Modeling of advanced high strength steels with the realistic microstructure–strength relationships, Computational materials science, vol. 45, no. 4, pp. 860-886, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-67349151745
Citation counts: Scopus - 13, Thomson - 7
DRO entry for this publication

Beladi, Hossein, Cizek, Pavel and Hodgson, Peter (2009) Texture and substructure characteristics of dynamic recrystallization in a Ni–30%Fe austenitic model alloy, Scripta materialia, vol. 61, no. 5, pp. 528-531, Pergamon, Kidlington, United Kingdom [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-67549099111
Citation counts: Scopus - 15, Thomson - 12
DRO entry for this publication

Beladi, Hossein, Cizek, Pavel and Hodgson, Peter D. (2009) Dynamic recrystallization of austenite in Ni-30 Pct Fe model alloy : microstructure and texture evolution, Metallurgical and materials transactions A : physical metallurgy and materials science, vol. 40, no. 5, pp. 1175-1189, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-64849117275
Citation counts: Scopus - 28, Thomson - 24
DRO entry for this publication

Beladi, H., Adachi, Y.*, Timokhina, I. and Hodgson, P.D. (2009) Crystallographic analysis of nanobainitic steels, Scripta materialia, vol. 60, no. 6, pp. 455-458, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-58149488741
Citation counts: Scopus - 27, Thomson - 25
DRO entry for this publication

Chen, Xiao-Bo, Li, Yun-Cang, Hodgson, Peter D. and Wen, Cui'e (2009) The importance of particle size in porous titanium and nonporous counterparts for surface energy and its impact on apatite formation, Acta biomaterialia, vol. 5, no. 6, pp. 2290-2302, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-67349083930
Citation counts: Scopus - 20, Thomson - 19
DRO entry for this publication

Chen, Xiaobo, Li, Yuncang, Hodgson, Peter D. and Wen, Cui'e (2009) Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids, Materials science and engineering C : materials for biological applications, vol. 29, no. 1, pp. 165-171, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 5055 – Scopus EID: 2-s2.0-61349129509
Citation counts: Scopus - 24, Thomson - 16
DRO entry for this publication

Chen, Xiao-bo, Li, Yuncang, du Plessis, Johan*, Hodgson, Peter and Wen, Cui'e (2009) Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications, Acta biomaterialia, vol. 5, no. 5, pp. 1808-1820, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-67349131986
Citation counts: Scopus - 31, Thomson - 30
DRO entry for this publication

Gao, Weimin, Kong, Lingxue, Long, John M. and Hodgson, Peter D. (2009) Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces, Journal of materials processing technology, vol. 209, no. 1, pp. 497-505, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-53949095824
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Hilditch, Timothy B., Timokhina, Ilana B., Robertson, Leigh T., Pereloma, Elena V.* and Hodgson, Peter D. (2009) Cyclic deformation of advanced high-strength steels : mechanical behavior and microstructural analysis, Metallurgical and materials transactions A : physical metallurgy and materials science, vol. 40, no. 2, pp. 342-353, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-59149101222
Citation counts: Scopus - 18, Thomson - 15
DRO entry for this publication

Kashyap, B. P.*, Hodgson, P. D., Estrin, Y.*, Timokhina, I., Barnett, M. R. and Sabirov, I.* (2009) Plastic flow properties and microstructural evolution in an ultrafine-grained Al-Mg-Si alloy at elevated temperatures, Metallurgical and materials transactions A – physical metallurgy and materials science, vol. 40, no. 13, pp. 3294-3303, Springer, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-72149093237
Citation counts: Scopus - 12, Thomson - 12
DRO entry for this publication

Li, Yuncang, Wong, Cynthia, Xiong, Jianyu, Hodgson, Peter and Wen, Cui'e (2009) In vitro cytotoxicity of binary TI alloys for bone implants, Materials science forum, vol. 618-619, pp. 295-298, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Wong, Cynthia S., Hodgson, Peter D. and Wen, Cui'e (2009) Ti6Ta4Sn alloy and subsequent scaffolding for bone tissue engineering, Tissue engineering part A, vol. 15, no. 10, pp. 3151-3159, Mary Ann Liebert Publishers, Rochelle, N.Y. [C1]
ERA journal ID: 3382 – Scopus EID: 2-s2.0-73349110141
Citation counts: Scopus - 20, Thomson - 20
DRO entry for this publication

Li, Y.C., Xiong, J.Y., Wong, C.S., Hodgson, P.D. and Wen, C.E. (2009) Bioactivating the surfaces of titanium by sol-gel process, Materials science forum, vol. 614, pp. 67-71, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 5
DRO entry for this publication

Lin, J.G., Li, Yuncang, Wong, Cynthia, Hodgson, Peter and Wen, Cui'e (2009) Degradation of the strength of porous titanium after alkali and heat treatment, Journal of alloys and compounds, vol. 485, no. 1-2, pp. 316-319, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-72049103153
Citation counts: Scopus - 8, Thomson - 5
DRO entry for this publication

Ma, X., Lapovok, R.*, Gu, C.*, Molotnikov, A.*, Estrin, Y.*, Pereloma, E.V.*, Davies, C.H.J.* and Hodgson, P. D. (2009) Deep drawing behaviour of ultrafine grained copper : modelling and experiment, Journal of materials science, vol. 44, no. 14, pp. 3807-3812, Springer, New York, N.Y. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-67649387998
Citation counts: Scopus - 16, Thomson - 14
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter D. and Pietrzyk, Maciej* (2009) Development of the multi-scale analysis model to simulate strain localization occurring during material processing, Archives of computational methods in engineering, vol. 16, pp. 287-318, Springer, Dordrecht, Netherlands [C1]
ERA journal ID: 39981 – Scopus EID: 2-s2.0-71449103722
Citation counts: Scopus - 14, Thomson - 11
DRO entry for this publication

Malekjani, Shokoufeh, Timokhina, Ilana, Sabirov, Ilchat and Hodgson, Peter (2009) Deformation behaviour of ultrafine grained steel produced by cold rolling of martensite, Canadian metallurgical quarterly, vol. 48, no. 3, pp. 229-236, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada [C1]
ERA journal ID: 4714 – Scopus EID: 2-s2.0-70349328091
Citation counts: Scopus - 1
DRO entry for this publication

Muszka, K.*, Hodgson, P. D. and Majta, J.* (2009) Study of the effect of grain size on the dynamic mechanical properties of microalloyed steels, Materials science and engineering A : structural materials: properties, microstructures and processing, vol. 500, no. 1 -2, pp. 25-33, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-56949101614
Citation counts: Scopus - 13, Thomson - 9
DRO entry for this publication

Nikhare, C., Weiss, M. and Hodgson, P.D. (2009) FEA comparison of high and low pressure tube hydroforming of TRIP steel, Computational materials science, vol. 47, no. 1, pp. 146-152, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-70350566540
Citation counts: Scopus - 8, Thomson - 7
DRO entry for this publication

Sabirov, Ilchat*, Barnett, Matthew Robert, Estrin, Yuri*, Timokhina, Ilana and Hodgson, Peter (2009) Deformation mechanisms in an ultra-fine grained Al alloy, International journal of materials research, vol. 100, no. 12, pp. 1679-1685, Carl Hanser Verlag GmbH, Munich, Germany [C1]
ERA journal ID: 123994 – Scopus EID: 2-s2.0-77952633134
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Sabirov, I.*, Barnett, M.R., Estrin, Y.* and Hodgson, P.D. (2009) The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy, Scripta materialia, vol. 61, no. 2, pp. 181-184, Pergamon, Kidlington. England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-65449166035
Citation counts: Scopus - 23, Thomson - 22
DRO entry for this publication

Shokouhi, A. and Hodgson, P.D (2009) Effect of transformation mechanism (static or dynamic) on final ferrite grain size, Materials science and technology, vol. 25, no. 1, pp. 29-34, Maney, Leeds, United Kingdom [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Sun, Y.*, Zhang, H. F.*, Wang, A. M.*, Fu, H. M.*, Hu, Z. Q.*, Wen, C. E. and Hodgson, P. D. (2009) Mg-based metallic glass / titanium interpenetrating phase composite with high mechanical performance, Applied physics letters, vol. 95, no. 17, pp. 1-3, American Institute of Physics, Melville, N.Y. [C1]
ERA journal ID: 949 – Scopus EID: 2-s2.0-70350721604
Citation counts: Scopus - 7, Thomson - 7
DRO entry for this publication

Timokhina, I. B., Hodgson, P. D., Beladi, H. and Pereloma, E. V.* (2009) Microstructure and mechanical properties of thermomechanically processed TRIP steel, La Metallurgia Italiana, vol. 11-12, pp. 43-48, Associazione Italiana Di Metallurgia, Milan, Italy [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Timokhina, I. B., Hodgson, P. D., Ringer, S. P.*, Zheng, R. K.* and Pereloma, E. V.* (2009) Effect of bake-hardening on the structure-property relationship of multiphase steels for the automotive industry, Steel research international, vol. 80, no. 7, pp. 507-514, Wiley - V C H Verlag, Weinheim, Germany [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Wang, Jiangting, Hodgson, Peter, Zhang, Jingde*, Yan, Wenyi* and Yang, Chunhui (2009) Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass, Journal of materials processing technology, vol. 209, no. 9, pp. 4601-4606, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-64249170298
Citation counts: Scopus - 14, Thomson - 11
DRO entry for this publication

Wang, X. J., Xiong, J.Y., Li, Y.C., Hodgson, P. D. and Wen, C. E. (2009) Apatite formation on nano-structured titanium and niobium surface, Materials science forum, vol. 614, pp. 85-92, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Wang, Xiaojian, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2009) Biomimetic coating on pure titanium submitted to different surface treatments, Materials Science Forum, vol. 618-619, pp. 311-314, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Wang, Xiaojian, Li, Yuncang, Xiong, Jianyu, Hodgson, Peter D. and Wen, Cui'e (2009) Porous TiNbZr alloy scaffolds for biomedical applications, Acta biomaterialia, vol. 5, no. 9, pp. 3616-3624, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-70349857805
Citation counts: Scopus - 47, Thomson - 40
DRO entry for this publication

Xie, Haowen, Li, Yuncang, Liao, Shuzhi*, Hodgson, Peter and Wen, Cui'e (2009) Plastic deformation in a partially crystallized Zr-based BMG under Vickers indenter, Journal of alloys and compounds, vol. 484, no. 1-2, pp. 886-890, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-69949088962
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Xie, Haowen, Li, Yuncang, Yang, Dengke, Hodgson, Peter and Wen, Cui'e (2009) Plastic deformation in the annealed Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under indenter, Journal of alloys and compounds, vol. 475, no. 1-2, pp. 501-505, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-63649144450
Citation counts: Scopus - 6, Thomson - 7
DRO entry for this publication

Xie, Haowen, Hodgson, Peter and Wen, Cui'e (2009) Effect of structure relaxation on the plastic deformation behaviour in a Zr-based BMG under indenter, Materials science forum, vol. 618-619, pp. 437-441, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2009) Bioactive hydroxyapatite coating on titanium-niobium alloy through a sol-gel process, Materials science forum, vol. 618-619, pp. 325-328, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Yamada, Y.*, Li, Yuncang, Xiong, J. X., Banno, T.*, Hodgson, P. D. and Wen, C. E. (2009) Preparation of bioactive porous titanium-molybdenum alloy through powder metallurgy, Materials science forum, vol. 620-622, pp. 745-748, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yang, Dengke, Hodgson, Peter and Wen, Cui'e (2009) The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding, Intermetallics, vol. 17, no. 9, pp. 727-732, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 1441 – Scopus EID: 2-s2.0-67349239121
Citation counts: Scopus - 19, Thomson - 20
DRO entry for this publication

Yang, Dengke, Hodgson, Peter and Wen, Cui'e (2009) Nucleation and growth during reactions in accumulative roll bonding of Ti/Al multilayers, Materials science forum, vol. 618-619, pp. 429-432, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yang, Dengke, Xiong, Jianyu, Hodgson, Peter and Wen, Cui'e (2009) Influence of deformation-induced heating on the bond strength of rolled metal multilayers, Materials letters, vol. 63, no. 27, pp. 2300-2302, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 1005 – Scopus EID: 2-s2.0-69949101379
Citation counts: Scopus - 8, Thomson - 6
DRO entry for this publication

Yazdipour, Nima, Hodgson, Peter and Davies, C. H. J.* (2009) Microstructure evolution modeling during and after deformation in 304 austenitic stainless steel through cellular automaton approach, International journal for multiscale computational engineering, vol. 7, no. 5, pp. 381-393, Begell House Inc., Redding, CT [C1]
ERA journal ID: 122920 – Scopus EID: 2-s2.0-70350052816
Citation counts: Scopus - 2
DRO entry for this publication

Zhang, L.C.*, Timokhina, I.B., La Fontaine, A.*, Ringer, S.P.*, Hodgson, P.D. and Pereloma, E.V.* (2009) Effect of pre-straining and bake hardening on the microstructure and mechanical properties of CMnSi trip steels, Metallurgia Italiana, vol. 101, no. 6, pp. 49-55, Assoc Italiana Metallurgia, Milan, Italy [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nikhare, C., Weiss, M. and Hodgson, P. D. (2009) Crash investigation of side intrusion beam during high and low pressure tube hydroforming, in Unknown (ed.), TUBEHYDRO 2009 : Proceedings of the 2009 International Conference of Tube Hydroforming conference, pp. 107-112, TUBEHYDRO, Kaohsiung, Taiwan [E1]
DRO entry for this publication

Nikhare, C., Weiss, M. and Hodgson, P. D. (2009) An investigation of complex shapes during low pressure tube hydroforming, in Levy, B. S.; Matlock, D. K. and Van Tyne, C. J. (eds), IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the 2009 International Deep-Drawing Research Group annual conference, pp. 879-888, IDDRG, Golden, Colo. [E1]
DRO entry for this publication

She, Fenghua, Chen, Ronghua, Gao, Weimin, Hodgson, Peter, Kong, Lingxue and Hong, H. Y.* (2009) Improved 3D thinning algorithms for skeleton extraction, in Unknown (ed.), DICTA 2009 : Digital Image Computing : Techniques and Application, pp. 14-18, DICTA2009 Committee, Melbourne, Vic. [E1]
DRO entry for this publication

Sudharsan, Ranjani, Mullins, J., Rolfe, B. and Hodgson, P. (2009) Development of material models to predict the crashworthiness of tubes, in AutoCRC Project Review Committee (ed.), AutoCRC Conference 2009 : Smarter, Safer, Cleaner, pp. 1-12, Cooperative Research Centre for Advanced Automotive Technology Ltd (AutoCRC), Melbourne, Vic. [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue, She, Fenghua and Hodgson, Peter (2009) Particle dynamics and heat transfer at workpiece surface in heat treatment fluidised beds, AMPT 2009 : Forging a better future, pp. 1-11 [E2]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2009) Integral approach and numerical improvement to calculate the carbon concentration profiles in carburising process, AMPT 2009 : Forging a better future, pp. 1 (ID332)-14, AMPT Committees, Kuala Lumpur, Malaysia [E2]
DRO entry for this publication

Gao, Weimin, She, Fenghua, Kong, Lingxue and Hodgson, Peter (2009) The influence of geometry and wall character of pores on the permeation of ions and water through desalination membranes, 5th IWA Specialised Membrane Technology Conferences for Water and Wastewater Treatment, p. ID139, Tsinghua University, Beijing, China [E2]
DRO entry for this publication

Li, Weiqi, Hodgson, Peter, Zhou, Jin* and Gao, Weimin (2009) Thermodynamic and kinetic modelling hydrogenation of titanium particles and sheets, AMPT 2009 : Forging a better future, pp. 1 (ID310)-11, AMPT Committees, Kuala Lumpur, Malaysia [E2]
DRO entry for this publication

Nikhare, C., Asgari, A., Weiss, M. and Hodgson, P. D. (2009) Multi-scale modelling of DP590 steel, SMF 2009 : Proceedings of the 2009 National Conference on Sheet Metal Forming, pp. 249-256, Sheet Metal Forming, Mumbai, India [E2]
DRO entry for this publication

She, Fenghua, Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2009) Dynamic characteristics and efficiency of a fluidized bed heat treatment process, AMPT 2009 : Forging a better future, pp. 1 (ID185)-9, AMPT Committees, Kuala Lumpur, Malaysia [E2]
DRO entry for this publication

She, Fenghua Mary, Hong, Hanyu*, Chen, Ronghua*, Gao, Weimin, Hodgson, Peter D. and Kong, Lingxue (2009) Geometrical and topological analysis of membrane's 3D pore structure, Proceedings of the 5th Aseanian Membrane Society Conference; 2009, Aseanian Membrane Societ, Kobe, Japan [EN]
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Asgari, S. A., Hodgson, P. D., Lemiale, V.*, Yang, C. and Rolfe, B. F. (2008) Multiscale particle-in-cell modelling for advanced high strength steels, Advanced materials research, vol. 32, pp. 285-288, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749122306
Citation counts: Scopus - 1
DRO entry for this publication

Asgari, S.A., Pereira, M., Rolfe, B.F., Dingle, M. and Hodgson, P.D. (2008) Statistical analysis of finite element modeling in sheet metal forming and springback analysis, Journal of materials processing technology, vol. 203, no. 1-3, pp. 129-136, Elsevier SA, Zürich, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-43849103630
Citation counts: Scopus - 26, Thomson - 18
DRO entry for this publication

Chen, Xiaobo, Nouri, Alireza, Li, Yuncang, Lin, Jianguo, Hodgson, Peter and Wen, Cui'e (2008) Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid, Biotechnology and bioengineering, vol. 101, no. 2, pp. 378-387, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 3345 – Scopus EID: 2-s2.0-51649120415
Citation counts: Scopus - 30, Thomson - 24
DRO entry for this publication

Dehghan-Manshadi, A.* and Hodgson, P. D. (2008) Dependency of recrystallization mechanism to the initial grain size, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 12, pp. 2830-2840, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-55249089898
Citation counts: Scopus - 13, Thomson - 7
DRO entry for this publication

Dehghan-Manshadi, A.*, Barnett, M. and Hodgson, P. (2008) Hot deformation and recrystallization of austenitic stainless steel: part 1. dynamic recrystallization, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 6, pp. 1359-1370, Springer, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-43149111820
Citation counts: Scopus - 63, Thomson - 48
DRO entry for this publication

Dehghan-Manshadi, A.*, Barnett, M. and Hodgson, P. (2008) Hot deformation and recrystallization of austenitic stainless steel: Part 11. post-deformation recrystallization, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 6, pp. 1371-1381, Springer, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-43449092857
Citation counts: Scopus - 17, Thomson - 12
DRO entry for this publication

Dehghan-Manshadi, A., Barnett, M. and Hodgson, P. (2008) Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 485, no. 1-2, pp. 664-672, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42149162933
Citation counts: Scopus - 85, Thomson - 61
DRO entry for this publication

Dehghan-Manshadi, Ali*, Jonas, John J.*, Hodgson, Peter and Barnett, Mathew (2008) Correlation between the deformation and post-deformation softening behaviours in hot worked Austenite, ISIJ International, vol. 48, no. 2, pp. 208-211, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-42349090027
Citation counts: Scopus - 5, Thomson - 3
DRO entry for this publication

Hodgson, Peter D., Shokouhi, Alireza and Beladi, Hossein (2008) A descriptive model for the formation of ultrafine grained steels, ISIJ international, vol. 48, no. 8, pp. 1046-1049, Nippon Tekko Kyokai, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-55149121188
Citation counts: Scopus - 16, Thomson - 13
DRO entry for this publication

Kashef, Sadaf, Yan, Wenyi*, Lin, J.ianguo and Hodgson, Peter (2008) Mechanical properties of titanium foam for biomedical applications, International journal of modern physics B, vol. 22, no. 31/32, pp. 6155-6160, World Scientific, Singapore [C1]
ERA journal ID: 987 – Scopus EID: 2-s2.0-62349142047
Citation counts: Scopus - 6
DRO entry for this publication

Kashef, Sadaf, Asgari, Alireza, Hodgson, Peter and Yan, Wenyi* (2008) Simulation of three-point bending test of titanium foam for biomedical applications, Advanced materials research, vol. 32, pp. 237-240, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749124809
Citation counts: Scopus - 3
DRO entry for this publication

Kong, L.X., She, F.H., Gao, W.M., Nahavandi, S. and Hodgson, P.D. (2008) Integrated optimization system for high pressure die casting processes, Journal of materials processing technology, vol. 201, no. 1 - 3, pp. 629-634, Elsevier SA, Zürich, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-41549168250
Citation counts: Scopus - 11, Thomson - 8
DRO entry for this publication

Nouri, Alireza, Chen, Xiaobo, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter D. and Wen, Cui'e (2008) Synthesis of Ti–Sn–Nb alloy by powder metallurgy, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 485, no. 1-2, pp. 562-570, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42149141831
Citation counts: Scopus - 24, Thomson - 16
DRO entry for this publication

Oudin, A., Hodgson, P.D. and Barnett, M.R. (2008) EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region, Materials science and engineering. A. Structural materials : properties, microstructures and processing, vol. 486, no. 1, pp. 72-79, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42949178650
Citation counts: Scopus - 9, Thomson - 6
DRO entry for this publication

Robertson, L.T, Hilditch, T.B and Hodgson, P.D (2008) The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel, International journal of fatigue, vol. 30, no. 4, pp. 587-594, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 3676 – Scopus EID: 2-s2.0-38149058125
Citation counts: Scopus - 21, Thomson - 18
DRO entry for this publication

Sabirov, I., Estrin, Y.*, Barnett, M., Timokhina, I.* and Hodgson, P. (2008) Tensile deformation of a ultrafine-grained aluminium alloy: micro shear banding and grain boundary sliding, Acta Materialia, vol. 56, no. 10, pp. 2223-2230, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-43449108255
Citation counts: Scopus - 50, Thomson - 42
DRO entry for this publication

Sabirov, I., Estrin, Y.*, Barnett, M., Timokhina, I.* and Hodgson, P. (2008) Enhanced tensile ductility of an ultra-fine-grained aluminium alloy, Scripta Materialia, vol. 58, no. 3, pp. 163-166, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-36049034351
Citation counts: Scopus - 36, Thomson - 30
DRO entry for this publication

Sabirov, Ilchat, Estrin, Yuri*, Barnett, Matthew R., Timokhina, Ilana B.* and Hodgson, Peter (2008) Deformation behaviour of an ultra-fine grained Al6082 alloy, Materials science forum, vol. 584 - 586, pp. 703-707, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

She, F.H., Gao, W. M, Peng, Z.*, Hodgson, P. D and Kong, L. X (2008) Micro- and nano-characterization of membrane materials, Journal of the Chinese Institute of Chemical Engineers, vol. 39, no. 4, pp. 313-320, Chinese Institute of Chemical Engineers, Taiwan, Republic of China [C1]
ERA journal ID: 3908 – Scopus EID: 2-s2.0-48849088544
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Srinivas Rao, V.*, Kashyap, B.P.*, Prabhu, N.* and Hodgson, P.D. (2008) T-Shaped equi-channel angular pressing of Pb-Sn eutectic and its tensile properties, Materials science and engineering. A. Structural materials : properties, microstructures and processing, vol. 486, no. 1, pp. 341-349, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42949138047
Citation counts: Scopus - 12, Thomson - 12
DRO entry for this publication

Wang, Jiangting, Hodgson, Peter, Zhang, Jingde* and Yang, Chunhui (2008) Residual thermal stresses in a Fe3Al/Al2O3 gradient coating system, Advanced Materials Research, vol. 32, pp. 71-74, Trans Tech Publications Ltd, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749093358
Citation counts: Scopus - 1
DRO entry for this publication

Wang, X. J., Li, Y. C., Lin, J. G., Yamada, Y.*, Hodgson, P. D. and Wen, C. E. (2008) In vitro bioactivity evaluation of titanium and niobium metals with different surface morphologies, Acta biomaterialia, vol. 4, no. 5, pp. 1530-1535, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-48449106921
Citation counts: Scopus - 34, Thomson - 31
DRO entry for this publication

Wang, Xiaojian, Li, Yuncang, Lin, Jianguo, Hodgson, Peter D. and Wen, Cui'e (2008) Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate, Dental materials, vol. 24, no. 11, pp. 1549-1555, Elsevier Inc, Maryland Heights, Mo. [C1]
ERA journal ID: 5041 – Scopus EID: 2-s2.0-52049084578
Citation counts: Scopus - 13, Thomson - 12
DRO entry for this publication

Wang, X., Li, Y., Lin, J., Hodgson, P. and Wen, C. (2008) Apatite-inducing ability of titanium oxide layer on titanium surface : the effect of surface energy, Journal of materials research, vol. 23, no. 6, pp. 1682-1688, Materials Research Society, Warrendale, Pa. [C1]
ERA journal ID: 4929 – Scopus EID: 2-s2.0-48949117348
Citation counts: Scopus - 24, Thomson - 22
DRO entry for this publication

Xie, Haowen, Lin, Jianguo, Li, Yuncang, Yan, Wenyi, Hodgson, Peter and Wen, Cui'e (2008) Plastic deformation in Zr41 Ti14 Cu12.5 Ni10 Be22.5 bulk metal glass under vickers indenter, Journal of alloys and compounds, vol. 461, no. 1-2, pp. 173-177, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-44649166315
Citation counts: Scopus - 7, Thomson - 5
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Hodgson, Peter D. and Wen, Cui'e (2008) Influence of porosity on shape memory behavior of porous TiNi shape memory alloy, Functional materials letters (FML), vol. 1, no. 3, pp. 215-219, World Scientific Publishing Co, Singapore [C1]
ERA journal ID: 122926 – Scopus EID: 2-s2.0-77954751379
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Wang, Xiaojian, Hodgson, Peter and Wen, Cui'e (2008) Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous ti-18Nb-4Sn alloy for biomedical applications, Acta biomaterialia, vol. 4, no. 6, pp. 1963-1968, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-53649089896
Citation counts: Scopus - 34, Thomson - 26
DRO entry for this publication

Xiong, J.Y., Li, Y.C., Wang, X.J., Hodgson, P.D. and Wen, C.E. (2008) Titanium–nickel shape memory alloy foams for bone tissue engineering, Journal of the mechanical behavior of biomedical materials, vol. 1, no. 3, pp. 269-273, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 44865 – Scopus EID: 2-s2.0-44849125403
Citation counts: Scopus - 26, Thomson - 16
DRO entry for this publication

Yan, Wenyi*, Sun, Qingping* and Hodgson, Peter D. (2008) Determination of plastic yield stress from spherical indentation slope curve, Materials letters, vol. 62, no. 15, pp. 2260-2262, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1005 – Scopus EID: 2-s2.0-41549157389
Citation counts: Scopus - 11, Thomson - 8
DRO entry for this publication

Yang, Chunhui, Hodgson, Peter Damian, Liu, Qianchu* and Ye, Lin* (2008) Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening, Journal of materials processing technology, vol. 201, no. 1-3, pp. 303-309, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-41549086562
Citation counts: Scopus - 30, Thomson - 14
DRO entry for this publication

Yang, Chunhui, Sabirov, Ilchat, Mullins, Jonathan and Hodgson, Peter (2008) Analytic prediction of structural stress-strain relations of microstructured metal, Advanced materials research, vol. 32, pp. 83-86, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749114142
Citation counts: Scopus - 1
DRO entry for this publication

Yazdipour, N., Davies, C.H.J.* and Hodgson, P.D. (2008) Microstructural modeling of dynamic recrystallization using irregular cellular automata, Computational materials science, vol. 44, no. 2, pp. 566-576, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-55649101459
Citation counts: Scopus - 45, Thomson - 41
DRO entry for this publication

Rolfe, B. F., Asgari, S. A. and Hodgson, P. D. (2008) The forming of advanced high strength steels for the automotive industry, Steel Research International, vol. Special issue; 1, pp. 9-18, Verlag Stahleisen., Düsseldorf, Germany [C1.1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Asgari, S. Alireza, Yang, Chunhui, Hodgson, Peter D. and Rolfe, Bernard F. (2008) Multiphase material modelling by multiscale particle-in-cell method, in El-Azab, Anter (eds), MMM 2008 : Proceedings of the 4th International Conference on Multiscale Materials Modeling, pp. 547-550, Department of Scientific Computing, Tallahassee, Fla. [E1]
DRO entry for this publication

Beladi, H., Hodgson, P. D. and Adachi, Y.* (2008) Formation of ultrafine ferrite by dynamic strain-induced transformation, in Unknown (ed.), MS & T 2008 : Materials Science & Technology Conference and Exhibition : October 5-9, 2008, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania : conference proceedings, pp. 1756-1763, Materials Science & Technology Conference, Warrendale, Pa. [E1]
DRO entry for this publication

Chen, X. B., Li, Y. C., Lin, J. G., Hodgson, P. D. and Wen, C. E. (2008) Biomimetic processing of nanocrystallite bioactive apatite coating on titanium-zirconium alloy, in Fan, Jinghong and Chen, Haibo (eds), ICHMM 2008 : Advances in heterogeneous material mechanics, 2008 : proceedings of the second International Conference on Heterogeneous Material Mechanics, June 3-8, 2008, Huangshan, China, pp. 620-623, DEStech Publications, Lancaster, Pa [E1]
DRO entry for this publication

Madej, L.*, Pietrzyk, M.* and Hodgson, P. D. (2008) Application of the strain localization CAFE model to investigate extrusion with various die shapes, in Unknown (ed.), MS & T 2008 : Materials Science & Technology Conference and Exhibition : October 5-9, 2008, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania : conference proceedings, pp. 867-876, Materials Science & Technology Conference, Westerville, Ohio. [E1]
DRO entry for this publication

Nikhare, Chetan P., Weiss, Matthias and Hodgson, Peter D. (2008) Experimental and numerical investigation of low pressure tube hydroforming on 409 stainless steel, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal Forming 2008 : Proceedings of the 12th International Conference on Metal Forming, pp. 272-279, Verlag Stahleisen GmbH, Duesseldorf, Germany [E1]
DRO entry for this publication

Nikhare, C. and Hodgson, P. D. (2008) Numerical investigation of ramp and constant pressurization system during tube crushing process, in Raj, Baldev (eds), ICAMT 2008 : Proceedings of International Conference on Advances in Manufacturing Technology, pp. 1-8, Indian National Academy of Engineering (INAE), Chennai, India [E1]
DRO entry for this publication

Nikhare, C., Weiss, M. and Hodgson, P. D. (2008) Numerical investigation of high and low pressure tube hydroforming, in Hora, Pavel (eds), NUMISHEET 2008 : Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 691-696, Institute of Virtual Manufacturing, Zurich, Switzerland [E1]
DRO entry for this publication

Nikhare, C., Marcondes, P. V.*, Weiss, M. and Hodgson, P. D. (2008) Experimental and numerical evaluation of forming and fracture behaviour of high strength steel, in Perez, Teresa (eds), TMS 2008 : New Developments on Metallurgy and Applications of High Strength Steels: Steel Conference, pp. 1-13, The Minerals, Metals & Materials Society (TMS), Buenos Aires, Argentina [E1]
DRO entry for this publication

Nouri, A., Chen, X., Hodgson, P. D., Long, J. M., Yamada, Y.* and Wen, C. (2008) Preparation of bioactive porous Ti-Sn-Nb alloy for biomedical applications, in Lefebvre, Louis Philippe; Banhart, John and Dunand, David C. (eds), MetFoam 2007 : International Conference on Porous Metals and Metallic Foams, pp. 307-310, DEStech Publications, Lancaster, Pa. [E1]
DRO entry for this publication

Nouri, Alireza, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter D. and Wen, Cui'e (2008) Effects of process control agent on the microstructure and mechanical properties of Ti-Sn-Nb alloy prepared by mechanical alloying, in Lawcock, Roger; Lawley, Alan and McGeehan, Partick J. (eds), PM 2008 : Advances in powder metallurgy & particulate materials : Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials, pp. 222-233, Metal Powder Industries Federation, Princeton, N.J. [E1]
DRO entry for this publication

Rolfe, Bernard, Nahavandi, Saeid and Hodgson, Peter (2008) Recent developments in automotive manufacturing using advanced high strength steels, in Raj, Baldev (eds), ICAMT 2008 : Proceedings of the Advances in Manufacturing Technology 2008 international conference, pp. 1-16, Indian National Academy of Engineering (INAE), Chennai, India [E1]
DRO entry for this publication

Xiong, J. Y., Li, Y. C., Hodgson, P. D. and Wen, C. E. (2008) Mechanical properties of porous Ti-26NB alloy for regenerative medicine, in Fan, Jinghong and Chen, Haibo (eds), ICHMM 2008 : Advances in heterogeneous material mechanics, 2008 : proceedings of the second International Conference on Heterogeneous Material Mechanics, June 3-8, 2008, Huangshan, China, pp. 630-634, DEStech Publications, Lancaster, Pa. [E1]
DRO entry for this publication

Yamada, Y.*, Li, Y. C., Xiong, J. Y., Banno, T.*, Hodgson, P. D. and Wen, C.E. (2008) Processing and mechanical properties of porous Ti-Mo alloy for biomedical applications, in Unknown (ed.), EURO PM 2008 : Proceedings of the International Powder Metallurgy Congress & Exhibition, pp. 201-205, European Powder Metallurgy Association, Shrewsbury, England [E1]
DRO entry for this publication

Yazdipour, N., Hodgson, Peter, Madej, Lukasz* and Rauch, L.* (2008) Numerical simulation of the static recrystalization at micro shear bands, in Unknown (ed.), MS & T 2008 : Materials Science & Technology Conference and Exhibition : October 5-9, 2008, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania : conference proceedings, pp. 832-843, Materials Science & Technology Conference, Warrendale, Pa. [E1]
DRO entry for this publication

Asgari, S. A., Hodgson, P. D. and Rolfe, B. F. (2008) Multiscale particle-in-cell for advanced high strength steels, in Bell, John (eds), FMST 2008 : Frontiers in materials science and technology, Trans Tech Publications, Stafa-Zurich, Switzerland [E1.1]
DRO entry for this publication

Kong, L. X. and Hodgson, P. D. (2008) Collaborative research training : a global challenge, in Unknown (ed.), ICPE-3 2008 : Proceedings of the 3rd International Conference On Postgraduate Education 2008, ICPE, Penang, Malaysia [E1.1]
DRO entry for this publication

Beladi, Hossein, Adachi, Yoshitaka*, Timokhina, Ilana and Hodgson, Peter (2008) Crystallographic analysis of nano-structured bainitic steels, TMP 2008 : Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, pp. 1-6, Associazione Italiana Di Metallurgia, Padua, Italy [E2]
DRO entry for this publication

Hilditch, Timothy B., Timokhina, Ilana B., Robertson, Leigh T., Pereloma, Elena V.* and Hodgson, Peter D. (2008) Microstructural analysis of pre-strained TRIP steel after fatigue testing, International Conference on New Developments in Advanced High-Strength Sheet Steels. Proceedings, pp. 295-303, Ronald E. Ashburn, USA [E2]
DRO entry for this publication

She, Fenghua, Nihara, K.*, Gao, Weimin, Hodgson, Peter, Jinnai, H.* and Kong, Lingxue (2008) 3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis, Papers presented at the conference on membranes in drinking water production and wastewater treatment, 20-22 October, Toulouse, France, pp. 1-8, MDIW, France [E2]
DRO entry for this publication

Timokhina, I. B., Pereloma, E. V.*, Beladi, H. and Hodgson, P. D. (2008) A study of the strengthening mechanism in the thermomechanically processed TRIP/TWIP steel, TMP 2008 : Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, pp. 1-10, Associazione Italiana Di Metallurgia, Padua, Italy [E2]
DRO entry for this publication

Wang, Jiangting, Hodgson, Peter Damian, Zhang, Jingde*, Yan, Wenyi* and Yang, Chunhui (2008) Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass, in Wang, Chengyong; Li, Xiaoping and Wang, Jun (eds), Proceedings of the 8th Asia-Pacific conference on materials processing, pp. 170-175, Frontiers of Design and Manufacturing, Riverwood, N.S.W. [E2]
DRO entry for this publication

Zhang, L. C.*, Timokhina, I. B., La Fontaine, A.*, Ringer, S. P.*, Hodgson, P. D. and Pereloma, E. V.* (2008) Effect of pre-straining and bake hardening on the microstructure and mechanical properties of CMnSi trip steels, TMP 2008 : Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, pp. 1-10, Associazione Italiana Di Metallurgia, Padua, Italy [E2]
DRO entry for this publication

Sabirov, Ilchat, Timokhina, Ilana, Barnett, Matthew and Hodgson, Peter (2008) The microstructure evolution and mechanical properties of cryorolled Al alloys, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal Forming 2008 : Proceedings of the 12th International Conference on Metal Forming, pp. 190-194, Verlag Stahleisen GmbH, Duesseldorf, Germany [E2.1]
DRO entry for this publication

Chen, Xiaobo, Li, Yuncang, Wang, Xiaojian, Nouri, Alireza, Lin, Jianguo, Hodgson, Peter D. and Wen, Cui'e (2008) Apatite formation behaviors in different calcium phosphate solutions on titanium, WBC 2008 : Proceedings of the 8th World Biomaterials Congress, p. 1, Marathon International, Amsterdam, The Netherlands [E3]
DRO entry for this publication

Rolfe, Bernard, Asgari, Alireza and Hodgson, Peter (2008) The forming of advanced high strength steels for the automotive industry, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal forming 2008 : [proceedings of] the 12th International Conference on Metal Forming 2008, Akademia Górniczo-Hutnicza, Kraków, Poland, September 21-24, 2008, pp. 9-18, Verlag Stahleisen [E3]
DRO entry for this publication

Wang, X. J., Yamada, Y.*, Xiong, J. Y., Chen, X. B., Li, Y. C., Lin, J. G., Hodgson, P. D. and Wen, C. E. (2008) Influence of interfacial structure on the bond strength of apatite layer on titanium substrate, WBC 2008 : Proceedings of the 8th World Biomaterials Congress, p. 1, Marathon International, Amsterdam, The Netherlands [E3]
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Lin, Jianguo, Hodgson, Peter D. and Wen, Cui'e (2008) Hydroxyapatite/Titania sol-gel coatings on porous titanium-niobium shape memory alloy for bone implants, WBC 2008 : Proceedings of the 8th World Biomaterials Congress, pp. 407-408, Marathon International, Amsterdam, The Netherlands [E3]
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Adachi, Yoshitaka*, Wakita, Masayuki*, Beladi, Hossein and Hodgson, Peter (2007) The formation of ultrafine ferrite through static transformation in low carbon steels, Acta Materialia, vol. 55, no. 14, pp. 4925-4934, Elsevier Science, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-34447318596
Citation counts: Scopus - 32, Thomson - 29
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) The effect of multiple deformations on the formation of ultrafine grained steels, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 38, no. 3, pp. 450-463, Minerals, Metals & Materials Society, Warrendale, PA. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-34250765772
Citation counts: Scopus - 29, Thomson - 22
DRO entry for this publication

Beladi, Hossein and Hodgson, Peter (2007) Effect of carbon content on the recrystallization kinetics of Nb-steels, Scripta materialia, vol. 56, no. 12, pp. 1059-1062, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-34247148888
Citation counts: Scopus - 18, Thomson - 15
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) Ultrafine grained structure formation in steels using dynamic strain induced transformation processing, International materials reviews, vol. 52, no. 1, pp. 14-28, Maney Publishing, London, England [C1]
ERA journal ID: 4910 – Scopus EID: 2-s2.0-33847062908
Citation counts: Scopus - 39, Thomson - 30
DRO entry for this publication

Beladi, Hossein and Hodgson, Peter (2007) The recrystallization behaviour of Nb microalloyed steels, Materials science forum, vol. 561, no. 565, pp. 25-28, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Chen, X, Nouri, A, Hodgson, Peter and Wen, Cui'e (2007) Surface modification of TiZr alloy for biomedical application, Advanced materials research, vol. 15, no. 17, pp. 89-94, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-48949119451
Citation counts: Scopus - 8
DRO entry for this publication

Dehghan-Manshadi, A., Barnett, Matthew and Hodgson, Peter (2007) Microstructural evolution during hot deformation of duplex stainless steel, Materials science and technology, vol. 23, no. 12, pp. 1478-1484, Maney Publishing, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 20, Thomson - 11
DRO entry for this publication

Eghbali, B*, Abdollah-Zadeh, A.* and Hodgson, Peter (2007) Dynamic softening of ferrite during large strain warm deformation of a plain-carbon steel, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 462, no. 1-2, pp. 259-263, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34247512869
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Finite element simulation of deformation processes of micro-components, Journal of mechanical science and technology, vol. 21, pp. 1456-1463, Springer, Germany [C1]
ERA journal ID: 3782 – Scopus EID: 2-s2.0-35348995076
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Alternating heat transfer between objects of large geometrical difference, Advances in engineering software, vol. 38, no. 11-12, pp. 818-825, Elsevier Applied Science, Barking, Essex, England [C1]
ERA journal ID: 22083 – Scopus EID: 2-s2.0-34447639059
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Computational simulation of gas flow and heat transfer near an immersed object in fluidized beds, Advances in engineering software, vol. 38, no. 11-12, pp. 826-834, Elsevier Applied Science, Barking, Essex, England [C1]
ERA journal ID: 22083 – Scopus EID: 2-s2.0-34447636752
Citation counts: Scopus - 7, Thomson - 7
DRO entry for this publication

Lapovok, Rimma* and Hodgson, Peter (2007) Determination of lower-bound ductility for AZ31 magnesium alloy by use of the bulge specimens, Journal of engineering materials and technology, vol. 129, no. 3, pp. 407-413, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 3776 – Scopus EID: 2-s2.0-34547767522
Citation counts: Scopus - 2, Thomson - 3
DRO entry for this publication

Lee, H.-W.*, Kwon, H.-C.*, Im, Y.-T.* and Hodgson, P.D. (2007) Numerical investigation of austenite grain size distribution in square-diamond pass hot bar rolling, Journal of materials processing technology, vol. 191, no. 1-3, pp. 114-118, Elsevier SA, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-34249980964
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Lin, Jianguo, Forrest, Mark, Hodgson, Peter and Wen, Cui'e (2007) Mechanical properties and energy absorption of ceramic particulate and resin-impregnation reinforced aluminium foams, Materials forum (CD-ROM), vol. 31, pp. 52-56, Institute of Materials Engineering Australasia Pty Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Lin, Jianguo, Xie, Haowen, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2007) Indentation study on the pressure sensitivity of a ZR-based bulk metallic glass, Materials forum (CD-ROM), vol. 31, pp. 139-143, Institute of Materials Engineering Australasia Pty Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2007) Comparison of the strain distribution obtained from multi scale and conventional approaches to modelling extrusion, Solid state phenomena, vol. 129, pp. 25-30, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 1144 – Scopus EID: 2-s2.0-37649007537
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2007) The validation of a multiscale rheological model of discontinuous phenomena during metal rolling, Computational materials science, vol. 41, pp. 236-241, Elsevier BV, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-35848968216
Citation counts: Scopus - 9, Thomson - 6
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2007) Multi-scale rheological model for discontinuous phenomena in materials under deformation conditions, Computational materials science, vol. 38, no. 4, pp. 685-691, Elsevier BV, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-33846263500
Citation counts: Scopus - 20, Thomson - 16
DRO entry for this publication

Madej, L.*, Paul, H.*, Hodgson, Peter and Pietrzyk, M.* (2007) Possibilities to include in numerical simulation stochastic and discontinuous phenomena occurring in material, Computer methods in materials science, vol. 7, no. 1, pp. 162-167, AKAPIT, Lodz, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Muszka, Krzysztof*, Majta, Janusz* and Hodgson, Peter (2007) Modeling of the mechanical behavior of nanostructured HSLA steels, ISIJ international, vol. 47, no. 8, pp. 1221-1227, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-35348815468
Citation counts: Scopus - 14, Thomson - 11
DRO entry for this publication

Nouri, Alireza, Lin, Jianguo, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter and Wen, Cui'e (2007) Microstructure evolution of TI-SN-NB alloy prepared by mechanical alloying, Materials forum (CD-ROM), vol. 31, pp. 64-70, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nouri, A., Chen, X., Hodgson, Peter and Wen, Cui'e (2007) Preparation and characterisation of new titanium based alloys for orthopaedic and dental applications, Advanced materials research, vol. 15-17, pp. 71-76, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749128342
Citation counts: Scopus - 5
DRO entry for this publication

Pathirana, Pubudu, Lim, A., Savkin, Andrey* and Hodgson, Peter (2007) Robust video/ultrasonic fusion-based estimation for automotive applications, IEEE transactions on vehicular technology, vol. 56, no. 4, pp. 1631-1639, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, N.J. [C1]
ERA journal ID: 5074 – Scopus EID: 2-s2.0-34547555847
Citation counts: Scopus - 10, Thomson - 8
DRO entry for this publication

Pereloma, E.*, Timokhina, Ilana*, Miller, M.* and Hodgson, Peter (2007) Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels, Acta materialia, vol. 55, no. 8, pp. 2587-2598, Elsevier Science Pub., New York, NY [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-34047116894
Citation counts: Scopus - 48, Thomson - 46
DRO entry for this publication

Shokouhi, A. and Hodgson, Peter (2007) Dynamic adjustment of ferrite grains during dynamic strain induced transformation, Materials science and technology, vol. 23, no. 10, pp. 1233-1242, Maney Publishing, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10, Thomson - 7
DRO entry for this publication

Timokhina, Ilana*, Hodgson, Peter and Pereloma, E.* (2007) Transmission electron microscopy characterization of the bake-hardening behavior of transformation-induced plasticity and dual-phase steels, Metallurgical and materials transactions A - Physical metallurgy and materials science, vol. 38, no. 10, pp. 2442-2454, Minerals, Metals & Materials Society, Warrendale, PA. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-42349094097
Citation counts: Scopus - 21, Thomson - 25
DRO entry for this publication

Timokhina, Ilana*, Pereloma, E.* and Hodgson, Peter (2007) Effect of initial processing on the microstructure-property relationships in bake-hardened C-Mn-Si TRIP steels, Materials science forum, vol. 539-543, pp. 4315-4320, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Timokhina, Ilana*, Hodgson, Peter, Ringer, S.*, Zheng, R.* and Pereloma, E.* (2007) Characterization of nano-scale particles in hot-rolled, high strength low alloy steels (HSLA), Materials science forum, vol. 561-565, pp. 2083-2086, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Timokhina, Ilana*, Hodgson, Peter, Ringer, S*, Zheng, R.* and Pereloma, E.* (2007) Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography, Scripta materialia, vol. 56, no. 7, pp. 601-604, Elsevier, New York, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-33846505968
Citation counts: Scopus - 36, Thomson - 27
DRO entry for this publication

Wang, X., Li, Y., Hodgson, Peter and Wen, Cui'e (2007) Nano- and macro-scale characterisation of the mechanical properties of bovine bone, Materials forum, vol. 31, pp. 156-159, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2007) The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming, Journal of engineering materials and technology, vol. 129, no. 4, pp. 530-537, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 3776 – Scopus EID: 2-s2.0-36049019926
Citation counts: Scopus - 10, Thomson - 7
DRO entry for this publication

Wen, Cui'e, Yamada, Y.*, Nouri, A. and Hodgson, Peter (2007) Porous titanium with porosity gradients for biomedical applications, Materials science forum, vol. 539-543, pp. 720-725, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10
DRO entry for this publication

Wen, Cui'e, Xu, W.*, Hu, W.* and Hodgson, Peter (2007) Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications, Acta biomaterialia, vol. 3, pp. 403-410, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-34147119678
Citation counts: Scopus - 76, Thomson - 64
DRO entry for this publication

Xie, Haowen, Lin, Jianguo, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2007) Composition dependency of the glass forming ability (GFA) in Mg—Ni—Si system by mechanical alloying, Materials science and engineering A: Structural materials: properties, microstructures and processing, vol. 459, no. 1-2, pp. 35-39, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34247115927
Citation counts: Scopus - 6, Thomson - 4
DRO entry for this publication

Xiong, J., Li, Y., Hodgson, Peter and Wen, Cui'e (2007) TiNi shape memory alloy foams synthesized by spacer sintering and their properties, Journal of materials science & engineering, vol. 25, no. 6, pp. 892-894, Zhejiang Daxue, Cailiao Yu Huaxue Gongcheng Xueyuan, Zhejiang, China [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter and Wen, Cui'e (2007) Processing and mechanical properties of porous titanium-niobium shape memory alloy for biomedical applications, Materials science forum, vol. 561, no. 565, pp. 1689-1692, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Yang, Chunhui, Hodgson, Peter, Liu, Q.* and Ye, L.* (2007) Three-dimensional Finite Element modelling of laser shock peening process, Materials science forum, vol. 561-565, pp. 2261-2264, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Yang, Chunhui, Su, Z.*, Ye, L.*, Zhou, L.* and Hodgson, Peter (2007) A signal processing approach for elastic wave-based structural health monitoring using active piezoelectrics, Key engineering materials, vol. 334-335, pp. 1141-1144, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-33847080860
DRO entry for this publication

Yang, C., Sabirov, I., Mullins, J., Yazdipour, N., Asgari, A. and Hodgson, P. (2007) Structure-property relations of metallic materials with multiscale microstructures, Materials forum (CD-ROM), vol. 31, pp. 177-185, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yazdipour, N., Davies, C.* and Hodgson, Peter (2007) Simulation of dynamic recrystallization using random grid cellular automata, Computer methods in materials science, vol. 7, no. 1, pp. 168-174, Publishing House AKAPIT, Krakow, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yazdipour, N., Dehghan-Manshadi, A., Davies, C.* and Hodgson, Peter (2007) Simulation of dynamic recrystallization using irregular cellular automata, Materials forum (CD-ROM), vol. 31, pp. 164-176, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Beladi, Somaieh, Pathirana, Pubudu and Hodgson, Peter (2007) Planar receiver placement for unique emitter localization for indoor applications, in Unknown (ed.), 3rd IEEE International Conference on Wireless and Mobile Computing, Networking and Communications, pp. 1-6, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, N.J. [E1]
DRO entry for this publication

Chen, Xiaobo, Li, Yuncang, Lin, Jianguo, Hodgson, Peter, Usher, B* and Wen, Cui'e (2007) Assessment of bioactivity of zirconium and titanium-zirconium alloy, in Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. (eds), Ti-2007, science and technology : proceedings of the 11th World Conference on Titanium (JIMIC5), pp. 1739-1742, Japan Institute of Metals, Sendai, Japan [E1]
DRO entry for this publication

Collins, Paul K., Mullins, Jonathan G., Rolfe, Bernard and Hodgson, Peter (2007) Modelling factors of square tubes in high speed bending situations, in Unknown (ed.), SAE 2007 World Congress, pp. 1-6, SAE International, Warrendale, Pa. [E1]
DRO entry for this publication

Muszka, K.*, Majta, Janusz* and Hodgson, Peter (2007) Studying of grain size effect on the deformation behavior of microalloyed steels, in Unknown (ed.), MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 493-504, MS & T, Detroit, Michigan [E1]
DRO entry for this publication

Timokhina, Ilana, Hodgson, Peter, Ringer, S.P.*, Zheng, R.K.* and Pereloma, E.V.* (2007) Nano-scale microstructural characterisation of modern high strength steels for the automotive industry, in Ashburn, Ronald E.; Brown, Christopher P.; Davis, Carolyn A. and Oldham, Lisa C. (eds), Proceedings of the International Conference on Microalloyed Steels: Processing, Microstructure, Properties and Performance, pp. 305-312, Association for Iron & Steel Technology, Pittsburgh, Pennsylvania [E1]
DRO entry for this publication

Xiong, J., Li, Y., Hodgson, Peter and Wen, Cui'e (2007) Preparation and characterization of TiNi shape memory alloy foams by powder metallurgy, in Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. (eds), Ti-2007, science and technology : proceedings of the 11th World Conference on Titanium (JIMIC5), pp. 1545-1548, The Japan Institute of Metals, Sendai, Japan [E1]
DRO entry for this publication

Kong, Lingxue, She, F. H., Gao, Weimin, Nahavandi, Saeid and Hodgson, Peter (2007) Integrated optimization system for high pressure die casting processes, in Unknown (ed.), AMPT 2007 : 10th International Conference on Advances in Materials and Processing Technologies, Daejeon, Korea, 07-11 October 2007, pp. 629-634, Elsevier, Amsterdam, The Netherlands [E1.1]
Citation counts: Thomson - 8
DRO entry for this publication

Madej, L.*, Gawad, Jerzy*, Hodgson, Peter and Pietrzyk, M.* (2007) Contribution to digital representation of materials subjected to thermomechanical processing, MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 403-414, MS & T, Detroit, Michigan [E2]
DRO entry for this publication

Mullins, Jonathan, Hodgson, Peter and Hilditch, Tim (2007) Stress response of advanced high strength steels using tapered tensile specimens and digital image correlation method, MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 85-98, MS & T, Detroit, Michigan [E2]
DRO entry for this publication

Yang, Chunhui, Hodgson, Peter, Liu, Qianchu* and Ye, Lin* (2007) Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening, AMPT 2007 : 10th International Conference on Advances in Materials and Processing Technologies, Daejeon, Korea, 07-11 October 2007, pp. 709-718, Elsevier, Amsterdam, The Netherlands [E2]
Citation counts: Scopus - 30, Thomson - 22
DRO entry for this publication

Fabijanic, Dan and Hodgson, Peter (2007) A new duplex surface modifcation process using fluid bed CVD, Thermal processing and surface engineering : key activities in the global knowledge economy ; the 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) congress ; 30th October to 1st November 2007, Brisbane, Australia ; proceed, p. 115, Materials Australia, Melbourne, Vic. [E3]
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Forrest, Mark, Hodgson, Peter and Wen, Cui'e (2007) Mechanical property and energy absorption of aluminium foams under dynamic and quasi-static compression, TMS 2007 : 136th Annual Meeting and Exhibition, p. 184, The Minerals, Metals and Materials Society (TMS), United States [E3]
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Hodgson, Peter and Wen, Cui'e (2007) Shape memory alloy scaffolds for bone tissue engineering, TMS 2007 : 136th Annual Meeting and Exhibition, p. 125, The Minerals, Metals and Materials Society (TMS), United States [E3]
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Madej, L.*, Hodgson, Peter and Pietrzyk, M.* (2006) Multi scale analysis of material behavior during deformation processes, in Kurzydlowski, Krzysztof J. (eds), Foundation of materals design 2006, pp. 17-46, Research Signpost, India [B1]
DRO entry for this publication

Eghbali, Beitallah*, Abdollah-Zadeh, A.*, Beladi, Hossein and Hodgson, Peter (2006) Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steel, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 435-436, pp. 499-503, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-33748904213
Citation counts: Scopus - 14, Thomson - 18
DRO entry for this publication

Fei, Dongye and Hodgson, Peter (2006) Experimental and numerical studies of springback in air V-bending process for cold rolled TRIP steels, Nuclear engineering and design, vol. 236, no. 18, pp. 1847-1851, North-Holland Pub. Co.,, Amsterdam, Netherlands [C1]
ERA journal ID: 1208 – Scopus EID: 2-s2.0-33745493984
Citation counts: Scopus - 52, Thomson - 40
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2006) Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed, Applied thermal engineering, vol. 26, no. 14-15, pp. 1463-1470, Pergamon, Oxford, United Kingdom [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-33646349454
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Lee, Ho-Won*, Kwon, Hyuck-Cheol*, Im, Yong-Taek* and Hodgson, Peter D. (2006) Microstructure evolution modeling of square-diamond pass hot bar rolling of AISI 4135 steel, Computer methods in materials science, vol. 6, no. 3, pp. 140-149, AKAPIT, Lodz, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Muszka, K.*, Hodgson, P. D. and Majta, J.* (2006) A physical based modeling approach for the dynamic behavior of ultrafine grained structures, Journal of materials processing technology, vol. 177, no. 1-3, pp. 456-460, Elsevier SA, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-33745960406
Citation counts: Scopus - 8, Thomson - 6
DRO entry for this publication

Nanayakkara, N.K.B. Manjula P. and Hodgson, Peter (2006) Determination of drawbead contacts with variable bead penetration, Computer methods in materials science, vol. 6, no. 3, pp. 188-194, Akapit, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Wang, X.J., Chen, X.B., Hodgson, Peter and Wen, Cui'e (2006) Elastic modulus and hardness of cortical and trabecular bovine bone measured by nanoindentation, Transactions of Nonferrous Metals Society of China, vol. 16, no. 2, Supplement, pp. 744-748, Elsevier B.V., Changsha, China [C1]
ERA journal ID: 4123 – Scopus EID: 2-s2.0-33746828183
Citation counts: Scopus - 15, Thomson - 10
DRO entry for this publication

Wen, Cui'e, Yamada, Y.* and Hodgson, Peter (2006) Fabrication of novel TiZr alloy foams for biomedical applications, Materials science & engineering. C, biomimetic materials, sensors and systems., vol. 26, no. 8, pp. 1439-1444, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 5055 – Scopus EID: 2-s2.0-33746704329
Citation counts: Scopus - 38, Thomson - 33
DRO entry for this publication

Xu, W.*, Hu, W.*, Li, M.*, Ma, Q.*, Hodgson, Peter and Wen, Cui'e (2006) Sol-gel derived HA/TiO2 double coatings on Ti scaffolds for orthopaedic applications, Transactions of Nonferrous Metals Society of China, vol. 16, no. 1, pp. 209-216, Elesvier B.V., Changsha, China [C1]
ERA journal ID: 4123 – Scopus EID: 2-s2.0-33746784336
Citation counts: Scopus - 13, Thomson - 3
DRO entry for this publication

Gao, Weimin, Hodgson, Peter D. and Kong, Lingxue* (2006) Numerical analysis of heat transfer and the optimisation of regenerators, Numerical heat transfer, part A, vol. 50, no. 1, pp. 63-78, Taylor & Francis, Philadelphia, Pa. [C1.1]
ERA journal ID: 3804 – Scopus EID: 2-s2.0-33744902861
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Bauer, N, Pathirana, Pubudu and Hodgson, Peter (2006) Robust optical flow with combined Lucas-Kanade/Horn-Schunck and automatic neighborhood selection, in Unknown (ed.), Sustainable development through effective man-machine co-existence, pp. 378-383, IEEE Computer Society, New York, NY [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Fabijanic, Dan and Hodgson, Peter (2006) Computational simulation of the influence of moving solid particles on species diffusion and chemical reactions, in Topping, B.H.V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Fifth International Conference on Engineering Computational Technology, pp. 467-468, Civil-Comp, Kippen [E1]
DRO entry for this publication

Ighaniyan, S., Hall, W., Long, John and Hodgson, Peter (2006) A study on veining, burn on sand and distortion of water jacket cores at the Ford casting plant, in Li Yanxiang; Shen Houfa; Xu Quingyan and Han Zhiqiang (eds), Science and processing of cast iron VIII: proceedings of the 8th International Symposium on Science and Processing of Cast Iron, pp. 288-293, Tsinghua University Press, Beijing, China [E1]
DRO entry for this publication

Ighaniyan, S., Hall, W., Long, John and Hodgson, Peter (2006) The implementation of the Taguchi method to improve foundry scraps in hot box core production process at Ford casting plant, in Li, Yanxiang; Shen, Houfa; Xu, Quingyan and Han, Zhiqiang (eds), Science and processing of cast iron VIII: proceedings of the 8th International Symposium on Science and Processing of Cast Iron, pp. 446-451, Tsinghua University Press, Beijing, China [E1]
DRO entry for this publication

Pathirana, Pubudu, Lim, Allan, Savkin, Andrey* and Hodgson, Peter (2006) Robust video/ultrasonic fusion based estimation for automotive applications, in Unknown (ed.), Integrating manufacturing and services systems, pp. 207-212, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Asgari, Alireza, Lemiale, Vincent*, Sunter, Patrick*, Quenette, Steve*, Hodgson, Peter and Rolfe, Bernard (2006) Application of radial return mapping algorithm for finite strain elastoplasticity in a hybrid finite element and particle-in-cell model, in Liu, W. K. and Chen, J. S. (eds), Proceedings of the 7th World Congress of Computational Mechanics on Computational Bridging of Length Scales in Complex Materials, Los Angeles, California, 20–21 July 2006, World Congress on Computational Mechanics, Los Angeles, Calif. [E2]
DRO entry for this publication

de Souza, Timothy, Rolfe, Bernard, Duncan, John* and Hodgson, Peter (2006) Quantitative analysis of robustness in a simulated stamping process, in Santos, Abel D. (eds), Drawing the things to come : trends and advances in sheet metal forming ; IDDRG International Deep Drawing Research Group 2006 conference ; June 19 - 21, 2006, Porto, Portugal ; proceedings, pp. 1-8, Instituto de Engenharia Mecânica e Gestô Industrial, Leça do Balio, Portugal [E2]
DRO entry for this publication

Robertson, L., Hilditch, Tim and Hodgson, Peter (2006) Low-cycle fatigue properties of TRIP steel, MS & T 2006 : Proceedings of the Materials Science & Technology 2006 Conference and Exhibition (MS&T'06), pp. 63-73, MS & T, Cincinnati, Oh. [E2]
DRO entry for this publication

Scott, Robert* and Hodgson, Peter (2006) The tensile behaviour of structural steel with an ultrafine microstructure, Asia Steel International Conference 2006 : Asia Steel '06 : proceedings : May 9-11, 2006 Fukuoka, Japan, pp. 120-127, The Iron and Steel Institute of Japan, Tokyo, Japan [E2]
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard and Hodgson, Peter (2006) The influence of temperature on the springback behavior of metal/polymer-laminates, in Santos, Abel D. and Rocha, Barata da (eds), Drawing the things to come : trends and advances in sheet metal forming ; IDDRG International Deep Drawing Research Group 2006 conference ; June 19 - 21, 2006, Porto, Portugal ; proceedings, pp. 199-206, Instituto de Engenharia Mecânica e Gestô Industrial, Leça do Balio, Portugal [E2]
DRO entry for this publication

2006 External

Asgari, S. A.*, Hodgson, P.*, Rolfe, B. F.*, Sunter, P.* and Lemiale, V.* (2006) Multiscale modeling of hardening mechanisms and phase transformation in TRIP steel, Xanthus : a solid mechanic code based on St. Germain framework, in Unknown (ed.), ARNAM 2006 : Proceedings of the 2006 Australian Research Network for Advanced Materials 2006 Annual Workshop, ARNAM, Brisbane, Qld. [E1.1]
DRO entry for this publication

2005 School of Engineering

Beladi, Hossein, Hodgson, Peter and Barnett, Matthew (2005) Mapping the hot deformation microstructure of Ni-30Fe alloy, ISIJ international, vol. 45, no. 12, pp. 1893-1896, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-33344471187
Citation counts: Scopus - 5
DRO entry for this publication

Cartmill, M., Barnett, Matthew, Zahiri, S.* and Hodgson, Peter (2005) An analysis of the transition between strain dependent and independent softening in austenite, ISIJ international, vol. 45, no. 12, pp. 1903-1908, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-33244470179
Citation counts: Scopus - 15, Thomson - 14
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina, Long, John and Hodgson, Peter (2005) A nitrocarburising and low-temperature chromising duplex surface treatment, Materials forum, vol. 29, pp. 77-82, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2005) Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds, International journal of materials & product technology, vol. 24, no. 1-4, pp. 319-338, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-27844589510
Citation counts: Scopus - 5
DRO entry for this publication

Hilditch, Tim and Hodgson, Peter (2005) Development of the sheared edge in the trimming of steel and light metal sheet, part 2 - mechanisms and modelling, Journal of materials processing technology, vol. 169, no. 2, pp. 192-198, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-26444559018
Citation counts: Scopus - 8, Thomson - 7
DRO entry for this publication

Hilditch, Tim and Hodgson, Peter (2005) Development of the sheared edge in the trimming of steel and light metal sheet, part 1 - experimental observations, Journal of materials processing technology, vol. 169, no. 2, pp. 184-191, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-26444459352
Citation counts: Scopus - 12, Thomson - 10
DRO entry for this publication

Hodgson, Peter, Beladi, Hossein and Barnett, Matthew (2005) Grain refinement in steels through thermomechanical processing, Materials science forum, vol. 500, no. 501, pp. 39-48, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 6
DRO entry for this publication

Hodgson, Peter, Beladi, Hossein and Kelly, Georgina (2005) Development of ultrafine grained steels through thermomechanical processing, Canadian metallurgical quarterly, vol. 44, no. 2, pp. 179-185, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada [C1]
ERA journal ID: 4714 – Scopus EID: 2-s2.0-29844432174
Citation counts: Scopus - 4
DRO entry for this publication

Lee, Ho-Won*, Kwon, Hyuck-Cheol*, Im, Yong-Taek, Hodgson, Peter and Zahiri, S. (2005) Local Austenite grain size distribution in hot bar rolling of AISI 4135 Steel, ISIJ International, vol. 45, no. 5, pp. 706-712, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-22544450189
Citation counts: Scopus - 9
DRO entry for this publication

Nanayakkara, N.K.B.M.P., Long, John and Hodgson, Peter (2005) Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing, Materials forum, vol. 29, pp. 340-344, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming, Materials forum, vol. 29, pp. 114-118, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Scott, R.I. and Hodgson, Peter (2005) The mechanical characterization of low work hardening, high strength steel, Journal of ASTM International, vol. 2, no. 9, pp. 1-15, ASTM International, West Conshohocken, PA [C1]
ERA journal ID: 39904 – Scopus EID: 2-s2.0-30644470397
DRO entry for this publication

Wen, Cui'e, Yamada, Yasuo* and Hodgson, Peter (2005) Fabrication of novel metal alloy foams for biomedical applications, Materials forum, vol. 29, pp. 274-278, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 8
DRO entry for this publication

Zahiri, Saden H., Davies, Chris H.J.* and Hodgson, Peter (2005) A mechanical approach to quantify dynamic recrystallization in polycrystalline metals, Scripta materialia, vol. 52, no. 4, pp. 299-304, Pergamon, Tarrytown, NY [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-9544233550
Citation counts: Scopus - 34, Thomson - 22
DRO entry for this publication

Hodgson, Peter, Shokouhi, A. and Beladi, Hossein (2005) Microstructural evolution during dynamic strain-induced transformation, Zairyo to purosesu, vol. 18, pp. 1315-1318, Nippon Tekko Kyokai, Tokyo, Japan [C2]
ERA journal ID: 4856 – Scopus EID: Not tagged
DRO entry for this publication

Hodgson, Peter, Shokouhi, Alireza, Dehghan-Manshadi, A. and Beladi, Hossein (2005) Grain refinement through controlled thermomechanical processing, Iron and steel supplement, vol. 40, pp. 31-38, Metallurgical Industry Press, China [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Shokouhi, Alireza and Hodgson, Peter (2005) The role of dynamic recrystallisation in grain refinement through strain induced transformation, Iron and steel supplement, vol. 40, pp. 247-252, Editorial Committee of Iron and Steel, Beijing, China [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) A qualitative and quantitative investigation of the surface tribology in forming galvanneal steel, in Xie, M.; Mouritz, A.; Khatibi, A. A.; Gardiner, C. and Chiu, W. K. (eds), Advances in applied mechanics : proceedings of the fourth Australasian Congress on Applied Mechanics Applied Mechanics, pp. 357-362, Institute of Materials Engineering Australasia, North Melbourne, Vic [E1]
DRO entry for this publication

Pereira, Michael, Asgari, Alireza, de Souza, Timothy, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Sheet forming simulation and springback prediction for AHSS automotive components, in Miles, M. P. and Stoudt, M. R. (eds), Copper for the 21st century : proceedings of the conference held September 25-28, 2005 Pittsburgh, Pennsylvania USA, pp. 51-62, ASM International, Warrendale, Pa. [E1]
DRO entry for this publication

Asgari, Alireza, Pereira, Michael, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Design of experiments and springback prediction for AHSS automotive components with complex geometry, in Smith, L.M.; Pourboghrat, F.; Yoon, J.W. and Stoughton, T.B. (eds), NUMISHEET 2005 : Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 215-220, American Institute of Physics (AIP), Melville, N.Y. [E2]
DRO entry for this publication

Cizek, Pavel*, Wynne, B.*, Hodgson, Peter and Muddle, B.* (2005) Effect of simulated thermomechanical processing on the transformation characteristics and microstructure of an X80 pipeline steel, in Buzzichelli, G. (eds), SHSS 2005 : Proceedings of the International Conference on Super-High Strength Steels, Associazione Italiana di Metallurgia, Milano, Italy [E2]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2005) Computational simulation of heat transfer and optimization of sphere regenerators, in Guo, Liejin (eds), Multiphase flow, heat mass transfer and energy conversion : fifth International Symposium held 3-6 July 2005, Xi'an, China, Xi'an Jiaotong University Press, Xi'an, China [E2]
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2005) Criteria for development of the strain localization during deformation in the multi scale analysis model, in Tadeusiewicz, Ryszard; Ligęza, Antoni and Szymkat, Maciej (eds), CMS 2005 : Computer methods and systems, pp. 91-100, Oprogramowanie Naukowo-Techniczne, Kraków, Poland [E2]
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter, Zmudzki, A.* and Pietrzyk, M.* (2005) A multi scale model to predict material behavior during deformation processes, in Owen, D R J; de Navarra, Eugenio Oñate Ibáñez and Suárez, B . (eds), Complas 2005 : Computational plasticity : fundamentals and applications : proceedings of the Eight International Conference on Computational Plasticity held in Barcelona, Spain, 5th-7th September 2005, Barcelona International Center for Numerical Methods in Engineering, Barcelona, Spain [E2]
DRO entry for this publication

Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2005) The influence of temperature on the formability of metal/polymer/metal-laminates, in Boudeau, N. (eds), IDDRG 2005 : Proceedings of the 24th International Deep-Drawing Research Group Congress, International Deep-Drawing Research Group, Besançon, France [E2]
DRO entry for this publication

2004 School of Engineering

Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 367, pp. 152-161, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0942269403
Citation counts: Scopus - 53, Thomson - 49
DRO entry for this publication

Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained microstructures in steel through strain induced transformation during single pass hot rolling, Materials science and technology, vol. 20, no. 2, pp. 213-220, The Institute, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 14
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing, Materials transactions, vol. 45, no. 7, pp. 2214-2218, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-4544244971
Citation counts: Scopus - 10, Thomson - 5
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) The evolution of ultrafine ferrite formation through dynamic strain-induced transformation, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 371, no. 1, pp. 343-352, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-16544369376
Citation counts: Scopus - 58, Thomson - 48
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling, Materials science and technology, vol. 20, no. 12, pp. 1538-1544, Maney Publishing, Leeds, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10
DRO entry for this publication

Dehghan-Manshadi, A., Beladi, Hossein, Barnett, Matthew and Hodgson, Peter (2004) Recrystallization in 304 austenitic stainless steel, Materials science forum, vol. 467, no. 470, pp. 1163-1168, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 15
DRO entry for this publication

Ebrahimi, R.*, Oudin, A., Najafi-Zadeh, A.*, Barnett, Matthew and Hodgson, Peter (2004) Static recrystallization of Ti-IF steel after warm deformation, Materials science forum, vol. 467, no. 470, pp. 251-256, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Gao, Weimin, Long, John, Kong, Lingxue* and Hodgson, Peter (2004) Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed, ISIJ international, vol. 44, no. 5, pp. 869-877, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-3142747729
Citation counts: Scopus - 11
DRO entry for this publication

Hodgson, Peter and Beladi, Hossein (2004) The formation of ultrafine grained steel microstructures through thermomechanical processing., Steel grips, vol. 2, no. Supplement, pp. 45-51, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

Hodgson, Peter and Beladi, Hossein (2004) The role of recrystallization and coarsening in the formation of ultrafine grained steels through thermomechanical processing., Materials science forum, vol. 467, no. 470, pp. 1137-1144, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Hodgson, Peter, Zahiri, S.H. and Whale, J.J. (2004) The static and metadynamic recrystallization behaviour of an X60 Nb Microalloyed Steel, ISIJ international, vol. 44, no. 7, pp. 1224-1229, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-4644312321
Citation counts: Scopus - 24, Thomson - 20
DRO entry for this publication

Khoddam, S.* and Hodgson, Peter (2004) Conversion of the hot torsion test results into flow curve with multiple regimes of hardening, Journal of materials processing technology, vol. 153-154, pp. 839-845, Elsevier BV, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-9444236764
Citation counts: Scopus - 14, Thomson - 13
DRO entry for this publication

Long, John, Haynes, D.A. and Hodgson, Peter (2004) Characterisation of galvanneal coatings on strip steel, Materials forum, vol. 27, pp. 62-67, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Mullins, Jonathan G., Hodgson, Peter and Dingle, Matthew E. (2004) Using inverse analysis to obtain material behaviour for crash simulations, Steel grips, vol. 2, no. Supplement, pp. 535-540, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

Nanayakkara, N., Kelly, Georgina and Hodgson, Peter (2004) Determination of the coefficient of friction in partially penetrated draw beads, Steel grips, vol. 2, no. Supplement, pp. 677-680, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2004) Grain size effect on the warm deformation behaviour of a Ti-IF steel, Materials science & engineering A. Structural materials : properties, microstructure and processing, vol. 367, no. 1-2, pp. 282-294, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0942278159
Citation counts: Scopus - 30
DRO entry for this publication

Timokhina, Ilana, Hodgson, Peter and Pereloma, E.V.* (2004) Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 35A, no. 8, pp. 2331-2341, ASM International, Warrendale, Pa. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-4644301946
Citation counts: Scopus - 120, Thomson - 98
DRO entry for this publication

Walsh, A.P., Baliga, B.* and Hodgson, Peter (2004) Force modelling of the crankshaft pin grinding process., Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, vol. 218, no. 3, pp. 219-228, Professional Engineering Publishing, London, England [C1]
ERA journal ID: 3648 – Scopus EID: 2-s2.0-8644266772
Citation counts: Scopus - 7
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard F., Dingle, Matthew E. and Hodgson, Peter (2004) The influence of interlayer thickness and properties on spring-back of SPS- (steel/polymer/steel) laminates., Steel grips, vol. 2, no. Supplement, pp. 445-449, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

Zahiri, S. H. and Hodgson, Peter (2004) The static, dynamic and metadynamic recrystallisation of a medium carbon steel, Materials science and technology, vol. 20, no. 4, pp. 458-464, The Institute, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10, Thomson - 9
DRO entry for this publication

Zahiri, Saden H., Byon, Sang Bin*, Kim, Sung-II*, Lee, Youngseog* and Hodgson, Peter (2004) Static and metadynamic recrystallization of interstitial free steels during hot deformation, ISIJ international, vol. 44, no. 11, pp. 1918-1923, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-11144225445
Citation counts: Scopus - 14, Thomson - 11
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2004) Development of a duplex surface treatment using fluidised bed technololgy, Materials Australia, vol. 37, no. 1, pp. 12-15, Institute of Metals and Materials Australasia Ltd, Parkville, Vic. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Computational simulation of heat transfer from alternate heating sources, in Topping, B. H. V. and Mota Soares, C. A. (eds), Proceedings of the 4th International Conference on Engineering Computational Technology, pp. 1-9, Civil-Comp, Kippen, Scotland [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Hodgson, Peter and Wang, B.* (2004) Numerical study of conduction and convection between immersed object and gas fluidized bed, in Cooper, J. (eds), Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis--2004 : presented at 7th Biennial Conference on Engineering Systems Design and Analysis, pp. 1-7, American Society of Mechanical Engineers, New York, N.Y [E1]
DRO entry for this publication

Kong, L. X.*, Gao, W. M. and Hodgson, P. D. (2004) Computational simulation of gas flow and heat transfer near immersed object in fluidised bed, in Topping, B. H. V. and Mota Soares, C. A. (eds), Progress in engineering computational technology : Proceedings of the 4th International Conference on Engineering Computational Technology, pp. 1-13, Saxe-Coburg, Stirling, Portugal [E1.1]
DRO entry for this publication

Asgari, Alireza, Pereira, Michael, Clark, Ben, Dingle, Matthew and Hodgson, Peter (2004) Sheet forming simulation for AHSS components in the automotive industry, in Ghosh, S.; Castro, J.C. and Lee, J.K. (eds), Materials processing and design : modeling, simulation and applications : NUMIFORM 2004, pp. 977-982, American Institute of Physics, Melville, N.Y. [E2]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Numerical study of gas flow and heat transfer in ceramic-sphere regenerators to perform high temperature air combustion, in Salem, Sam (eds), PCMM 2004: Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success, pp. 577-584, PCMM, Box Hill, Vic. [E2]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Numerical simulation of carbon transfer within a workpiece in a fluidised bed heat treatment furnance, in Salem, Sam (eds), PCMM 2004 : Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success, pp. 585-592, PCMM, Box Hill, Vic. [E2]
DRO entry for this publication

Madej, L.*, Hodgson, P.D. and Pietrzyk, M.* (2004) Application of identification techniques to determine effect of carbon content in steels on rheological parameters during hot deformation, in Ghosh, S.; Castro, J.C. and Lee, J.K. (eds), NUMIFORM 2004 : Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes : Materials Processing and Design : Modelling, Simulation and Applications, pp. 554-559, American Institute of Physics, Melville, N.Y. [E2]
DRO entry for this publication

Madej, L.*, Hodgson, P., Gawad, J.* and Pietrzyk, M.* (2004) Modelling of the rheological behavior and microstructure evolution using the cellular automaton technique, ESAFORM 2004 : The 7th ESAFORM Conference on Material Forming, pp. 143-146, Norwegian Institute of Science and Technology, Trondheim, Norway [E2]
DRO entry for this publication

Nanayakkara, M., Kelly, G. and Hodgson, P. (2004) Effect of contact pressure and lubrication on the coating characteristics, surface tribology and friction in forming zince coated sheet steel, in Haque, E.; Haseeb, A.; Rashid, A.; Islam, M. and Moniruzzaman, M. (eds), SPPM 2004 : Proceedings of the 2nd International Conference on Structure, Processing and Properties of Materials, pp. 313-320, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh [E2]
DRO entry for this publication

Wallace, A., Brownrigg, Allan, Hodgson, Peter and Frawley, L.* (2004) The effect of boron on low carbon rods and galvanised wires, MS & T 2004 : Materials science & technology : September 26-29, 2004, New Orleans, Louisiana, pp. 275-286, MS & T, New Orleans, Louisiana [E2]
DRO entry for this publication

Gao, W. M., Hodgson, P. D. and Kong, L. X.* (2004) Numerical study of gas circulation in heat-treatment furnaces to perform high temperature air combustion, in Salem, Sam (eds), PCMM 2004 : Proceedings : 8th International Conference on Manufacturing and Management : Operations Management and Advanced Technology : Integration for Success, PCMM, Box Hill, Vic. [E2.1]
DRO entry for this publication

Long, John, Gao, Weimin and Hodgson, Peter (2004) Depth-profiling of carbon in carburised steel by glow-discharge optical emission spectrometry, Surface Analysis '04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p. 84, John Wiley & Sons, Richland, Wash. [L2]
DRO entry for this publication

2003 School of Engineering

Khoddam, S.* and Hodgson, Peter (2003) A new method to determine the strain and strain rate hardening characteristics from the hot torsion test, Materials science forum, vol. 426, no. 432, pp. 1373-1378, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kim, Y. H.*, Ma, Xiang, Hodgson, Peter and Barnett, Matthew (2003) Multi equal channel angular pressing with rotational dies, Materials science forum, vol. 426, no. 432, pp. 2777-2782, Trans Tech Publications, Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2003) Grain size effect on behaviour and microstructure of a warm deformed Ti-IF steel, Materials science forum, vol. 426, no. 432, pp. 1279-1284, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Roucoules, C.*, Pietrzyk, M.* and Hodgson, Peter (2003) Analysis of work hardening and recrystallization during the hot working of steel using a statistically based internal variable model, Materials science and engineering A, vol. 339, no. 1-2, pp. 1-9, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0037413780
Citation counts: Scopus - 36, Thomson - 33
DRO entry for this publication

Shokouhi, A., Beladi, Hossein and Hodgson, Peter (2003) A study on ultrafine ferrite formation during post deformation cooling, Materials science forum, vol. 426, no. 432, pp. 1295-1300, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Timokhina, I.B., Hodgson, Peter and Pereloma, E.V.* (2003) Effect of deformation schedule on the microstructure and mechanical properties of a thermomechanically processed C-Mn-Si transformation-induced plasticity steel, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 34A, no. 8, pp. 1599-1609, ASM International, Warrendale, PA [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0041561073
Citation counts: Scopus - 52, Thomson - 38
DRO entry for this publication

Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2003) Formation of ultra-fine ferrite by deformation of austenite during single pass rolling, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 252-257, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Cardew-Hall, M.*, Pantano, V.* and Hodgson, Peter (2003) The changing nature of university-industry research alliances, in Mo, John (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., CSIRO Manufacturing and Infrastructure Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Cheesewright, G.*, Cardew-Hall, M.*, Hodgson, Peter, Rolfe, Bernard and Frayman, Yakov (2003) Press shop machine analysis and trending, in Deisenroth, Michael (eds), ICPR-17 : Electronic proceedings the 17th International Conference on Production Research, pp. 1-9, Virginia Tech, Blacksburg, Va. [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Carburising and carbon transfer coefficient in a fluidised bed furnance, in Brown, R H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., the Conference, Melbourne, Vic [E1]
DRO entry for this publication

Hodgson, Peter, Barnett, Matthew, Beladi, Hossein and Kelly, Georgina (2003) The production of ultrafine grained steels by thermomechanical processing, in Palmiere, E. J.; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 170-175, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Kong, Lingxue* and Hodgson, Peter (2003) Prediction of hot strength of steels with advanced models, in Zhang, L.C. and Lu, G. (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002), pp. 743-748, Trans Tech Publications, Uetikon-Zuerich, Switzerland ; Enfield, NH [E1]
DRO entry for this publication

Kong, L. X.* and Hodgson, P. D (2003) Constitutive modelling of drawing and extrusion with cyclic torsion, in Zhang, L.C. and Lu, G. (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002) : 2-6 December 2002, Sydney, Australia, pp. 101-106, Trans Tech Publications, Uetikon-Zuerich, Switzerland [E1]
DRO entry for this publication

Petrescu, D., Dingle, Matthew and Hodgson, Peter (2003) Prediction of ductile fracture in the cold forging of steel, in Brucato, Valerio (eds), Proceedings of the 6th ESAFORM Conference on Material Forming, pp. 919-922, Nuova Ipsa Editore, Palermo, Italy [E1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Webb, Geoff* and Hodgson, Peter (2003) Analysis of stamping production data with view towards quality management, in Brown, R. H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., pp. 1-15, the Conference, Melbourne, Vic [E1]
DRO entry for this publication

Timokhina, I. B., Hodgson, P. D. and Pereloma, E. V.* (2003) Effect of the thermomechanical processing parameters on the microstructure-property relationships in C-Mn-Si TRIP steel, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 115-121, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Dingle, Matthew, Hodgson, Peter and Cardew-Hall, Michael* (2003) Optimisation of draw die structures to reduce bedding time during try-out, in Singh, U.P. (eds), Sheet metal 2003 : proceedings of the 10th International Conference, held at the University of Ulster, Jordanstown, United Kingdom, 14-16, April 2003, pp. 333-340 [E2]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Dynamic analysis of instantaneous heat transfer between immersed surface and fluidised beds based on FE Simulation, ICIAM 2003 : 5th international congress on industrial and applied mathematics, Australian Mathematical Society, Sydney, N.S.W. [E2]
DRO entry for this publication

Gao, W., Hodgson, P. and Kong, L.* (2003) Numerical simulation and mechanism of heat transfer in quenching fluidised beds, in Pan, Jiansheng and Totten, George E. (eds), Quenching and the Control of Distortion : Proceedings of the 4th International Conference on Quenching and the Control of Distortion, pp. 137-142, Chinese Heat Treatment Society, Beijing, China [E2]
DRO entry for this publication

Mullins, Jonathan, Hodgson, Peter, Dingle, Matthew, Pidvysotskyy, Valery* and Gawad, Jerzy* (2003) Using Abaqus to predict the flow behaviour of metals, Proceedings of the Worley Australasian Finite Element Conference : the Mansion Hotel, Melbourne, Australia : 23-26 September 2003., Worley Limited, Melbourne, Vic. [E2]
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2003) Influence of grain size on the deformation behaviour of a TiIF Steel, in Takechi, H. (eds), IF steels 2003 : international forum for the properties and application of IF steels, pp. 329-336, Iron and Steel Institute of Japan, Tokyo, Japan [E2]
DRO entry for this publication

Timokhina, Ilana, Pereloma, Elena* and Hodgson, Peter (2003) TEM characterisation of thermomechanically processed C-Mn-Si TRIP steels with additions of Nb, Mo and Al, in Militzer, M.; Poole, W.J. and Essadiqi, E. (eds), Transformation and deformation mechanisms in advanced high-strength steels : proceedings, August 24-27, 2003, Vancouver, British Columbia, MetSoc, Montreal, Quebec [E2]
DRO entry for this publication

Long, John, Haynes, D.* and Hodgson, Peter (2003) Characterisation of galvanneal coatings on strip steel, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, pp. 1-6, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L2]
DRO entry for this publication

Long, John, Gao, Weimin and Hodgson, Peter (2003) Carbon depth-profiling in carburised steel, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, pp. 1-2, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L3]
DRO entry for this publication

2003 School of Engineering and Information Technology

Frayman, Yakov, Rolfe, Bernard F., Hodgson, Peter D. and Webb, Geoffrey I.* (2003) Improving the prediction of the roll separating force in a hot steel finishing mill, in Meech, John A.; Kawazoe, Yoshiyuki; Kumar, Vijay and Maguire, John F. (eds), IPMM 2003 : Intelligence in a small materials world : selected papers from the Fourth International Intelligent Processing and Manufacturing of Materials Conference, pp. 1-12, Intelligent Processing and Manufacturing of Materials, Sendai, Japan [E1.1]
DRO entry for this publication

2002 School of Engineering

Barnett, Matthew, Kelly, Georgina and Hodgson, Peter (2002) Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 33A, no. 7, pp. 1893-1900, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036650051
Citation counts: Scopus - 14
DRO entry for this publication

Choi, Sangwoo*, Lee, Youngseog* and Hodgson, Peter (2002) A comparative study of microstructures and mechanical properties obtained by bar and plate rolling, Journal of materials processing technology, vol. 124, no. 3, pp. 329-336, Elsevier Science B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037142639
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Choi, Sangwoo*, Lee, Youngseog*, Hodgson, Peter and Woo, Jong Soo* (2002) Feasibility study of partial recrystallisation in multi-pass hot deformation process and application to calculation of mean flow stress, Journal of materials processing technology, vol. 125, no. 126, pp. 63-71, Elsevier Science BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047844
Citation counts: Scopus - 6, Thomson - 6
DRO entry for this publication

Cizek, Pavel*, Wynne, B.*, Davies, Christopher*, Muddle, Barrington* and Hodgson, Peter (2002) Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 33, no. 5, pp. 1331-1349, ASM International, Warrendale, Pa. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036576139
Citation counts: Scopus - 62, Thomson - 43
DRO entry for this publication

de Ruyter, A.S., Cardew-Hall, M.J.* and Hodgson, Peter (2002) Estimating quality costs in an automotive stamping plant through the use of simulation, International journal of production research, vol. 40, no. 15, pp. 3835-3848, Institution of Production Engineers, London, England [C1]
ERA journal ID: 3609 – Scopus EID: 2-s2.0-18744399540
Citation counts: Scopus - 10, Thomson - 6
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2002) Numerical simulation of heat and mass transfer in fluidised bed heat treatment furnaces, Journal of materials processing technology, vol. 125-126, no. 9, pp. 170-178, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047824
Citation counts: Scopus - 15, Thomson - 11
DRO entry for this publication

Gotzinger, Mary*, Kalyanasundaram, S.*, Cardew-Hall, M.* and Hodgson, Peter (2002) A methodology for springback prediction, SAE transactions, vol. 110, pp. 1181-1186, Society of Automotive Engineers, New York, N.Y. [C1]
ERA journal ID: 3550 – Scopus EID: Not tagged
DRO entry for this publication

Hoggan, E. J., Scott, R. I., Barnett, Matthew and Hodgson, Peter (2002) Mechanical properties of tension levelled and skin passed steels, Journal of materials processing technology, vol. 125-126, pp. 155-163, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047815
Citation counts: Scopus - 7
DRO entry for this publication

Hurley, P. J.*, Muddle, B. C.* and Hodgson, Peter (2002) The production of ultrafine ferrite during hot torsion testing of a 0.11 Wt Pct C steel, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 33, no. 9, pp. 2985-2993, ASM International, Warrendale, Pa. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036709355
Citation counts: Scopus - 37, Thomson - 38
DRO entry for this publication

Kelly, Georgina, Beladi, Hossein and Hodgson, Peter (2002) Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel, ISIJ international, vol. 42, no. 12, pp. 1585-1590, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-0036994014
Citation counts: Scopus - 20, Thomson - 16
DRO entry for this publication

Lee, Y.*, Choi, S.* and Hodgson, Peter (2002) Integrated model for thermo-mechanical controlled process in rod (or bar) rolling, Journal of materials processing technology, vol. 125, no. 126, pp. 678-688, Elsevier Science B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047812
Citation counts: Scopus - 11, Thomson - 8
DRO entry for this publication

Lee, Y.*, Choi, S.* and Hodgson, Peter (2002) Analytical model of pass-by-pass strain in rod (or bar) rolling and its applications to prediction of austenite grain size, Materials science and engineering A : structural materials: properties, microstructures and processing, vol. 336, no. 1-2, pp. 177-189, Elsevier Science, New York, N.Y. [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0037175002
Citation counts: Scopus - 12, Thomson - 11
DRO entry for this publication

Petrescu, D., Savage, S.C. and Hodgson, Peter (2002) Simulation of the fastener manufacturing process, Journal of materials processing technology, vol. 125-126, pp. 361-368, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047932
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Timokhina, Ilana*, Hodgson, Peter and Pereloma, Elena* (2002) Effect of alloying elements on the microstructure property relationship in thermomechanically processed C-Mn-Si TRIP steels, Steel Research, vol. 73, no. 6-7, pp. 274-279, Verlag Stahleisen, Düsseldorf, Germany [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 5
DRO entry for this publication

Zhang, S., Hodgson, Peter, Cardew-Hall, M.J.* and Kalyanasundaram, S.* (2002) A finite element simulation of micro-mechanical frictional behaviour in metal forming, Journal of materials processing technology, vol. 134, no. 1, pp. 81-91, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037364288
Citation counts: Scopus - 12, Thomson - 15
DRO entry for this publication

Zhang, S., Hodgson, Peter, Duncan, J.L.*, Cardew-Hall, M.J.* and Kalyanasundaram, S.* (2002) Effect of membrane stress on surface roughness changes in sheet forming, Wear, vol. 253, no. 5-6, pp. 610-617, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-0036751737
Citation counts: Scopus - 6, Thomson - 6
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina, Cardew-Hall, Michael* and Hodgson, Peter (2002) Galling reduction through die surface treatment - testing three treatments for sheet metal stamping, Stamping journal, vol. 14, no. 2, pp. 30-31, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Frayman, Yakov, Rolfe, Bernard, Hodgson, Peter and Webb, G.I (2002) Predicting the rolling force in hot steel rolling mill using an ensemble model, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED International Conference, pp. 143-148, ACTA Press, New York, N.Y. [E1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Hodgson, Peter, Webb, G.I. and Kelly, Georgina (2002) Fault detection in a cold forging process through feature extraction with a neural network, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED Conference, pp. 155-159, ACTA Press, New York, N.Y [E1]
DRO entry for this publication

Timokhina, I., Hodgson, Peter and Pereloma, E.* (2002) Effect of strain and morphology of the bainitic microstructure on the retained austenite stability and mechanical properties of thermomechanically processed C-Mn-Si(-Nb) TRIP steels, in De Cooman, Bruno C. (eds), Proceedings of International Conference on Trip-Aided High Strength Ferrous Alloys, pp. 181-185, Druck & Verlagshaus Mainz, Berlin, Germany [E1]
DRO entry for this publication

Kelly, Georgina and Hodgson, Peter (2002) Grain refinement through thermomechanical processing, in Bott, Ivani (eds), Aços : perspectivas para os próximos 10 anos, pp. 89-94, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil [E2]
DRO entry for this publication

Timokhina, Ilana, Hodgson, Peter and Pereloma, Elena* (2002) Effect of alloying elements on the microstructure-property relationship in thermomechanically processed C-Mn-Si TRIP steels, in De Cooman, Bruno C. (eds), Proceedings of International Conference on Trip-Aided High Strength Ferrous Alloys, pp. 153-157, Druck & Verlagshaus Mainz, Berlin, Germany [E2]
DRO entry for this publication

2001 School of Engineering

Doolan, M.C.*, Kalyanasundaram, S.*, Hodgson, Peter and Cardew-Hall, M.* (2001) Identifying variation in sheet metal stamping, Journal of materials processing technology, vol. 115, no. 1, pp. 142-146, Elsevier Science SA, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
Citation counts: Thomson - 7
DRO entry for this publication

Hurley, P. J.*, Hodgson, Peter and Muddle, B. C.* (2001) A study of deformation substructures in austenite using a model Ni-30 wt.% Fe alloy, Scripta materialia, vol. 45, no. 1, pp. 25-32, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-0035854499
Citation counts: Scopus - 20, Thomson - 16
DRO entry for this publication

Hurley, Peter* and Hodgson, Peter (2001) Effect of process variables on formation of dynamic strain induced ultrafine ferrite during hot torsion testing, Materials Science and Technology, vol. 17, no. 11, pp. 1360-1368, Institute of Metals, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 35
DRO entry for this publication

Hurley, P.J.*, Muddle, B.C.* and Hodgson, Peter (2001) Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling, Metallurgical and materials transactions. A, physical metallurgy and materials science, vol. 32, no. 6, pp. 1507-1517, Minerals, Metals & Materials Society, Warrendale, PA [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0001422267
Citation counts: Scopus - 51, Thomson - 49
DRO entry for this publication

Hurley, P.J.* and Hodgson, Peter (2001) Formation of ultra-fine ferrite in hot rolled strip: potential mechanisms for grain refinement, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 302, pp. 206-214, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0035972131
Citation counts: Scopus - 106, Thomson - 91
DRO entry for this publication

Kong, Lingxue, Wang, B.* and Hodgson, Peter (2001) Prediction of stress-strain behaviors in steels using an integrated constitutive, FEM and ANN model, ISIJ international, vol. 41, no. 7, pp. 795-800, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: Not tagged
Citation counts: Scopus - 5
DRO entry for this publication

Kong, Lingxue, Lin, L. and Hodgson, Peter (2001) Material properties under drawing and extrusion with cyclic torsion, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 308, no. 1-2, pp. 209-215, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0342960843
Citation counts: Scopus - 8, Thomson - 9
DRO entry for this publication

Pereloma, E. V.*, Timokhina, Ilana and Hodgson, Peter (2001) Microstructure and mechanical properties of thermomechanically processed C-Si-Mn steels, Ironmaking and steelmaking, vol. 28, no. 2, pp. 198-202, Maney Publishing, London, England [C1]
ERA journal ID: 4721 – Scopus EID: Not tagged
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Timokhina, Ilana*, Pereloma, E.V.* and Hodgson, Peter (2001) Microstructure and mechanical properties of C-Si-Mn(-Nb) TRIP steels after simulated thermomechanical processing, Materials science and technology, vol. 17, no. 2, pp. 135-140, Maney Publishing, Leeds, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 16
DRO entry for this publication

Cardew-Hall, Michael*, Hodgson, Peter and Miller, Noel* (2001) Leaving the lab behind : Australian students move stamping research to the plant, Stamping journal, vol. 13, no. 2, pp. 26-29, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Barnett, Matthew and Hodgson, Peter (2001) Metal forming (hot) : microstructural aspects, in Buschow , K. H. Jürgen; Cahn , Robert W.; Flemings , Merton C.; Ilschner , Bernard; Kramer , Edward J.; Mahajan , Subhash and Veyssière , Patrick (eds), Encyclopedia of materials : science and technology, pp. 5417-5424, Elsevier, Amsterdam, The Netherlands [D2]
DRO entry for this publication

Doolan, M. C.*, Kalyanasundaram, S.*, Hodgson, Peter and Cardew-Hall, M.* (2001) Signature analysis using active shape models, in Duflou, J. R.; Geiger, M.; Kals, H. J. J.; Shirvani, B. and Singh, U. P. (eds), Proceedings of Sheet Metal 2001 9th International Conference, pp. 547-554, ACCO C.V., Leuven, Belgium [E1]
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2001) Combating adhesive wear in automotive stamping, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 237-242, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2001) Numerical simulation of heat transfer and temperature fields of workpiece in fluidized bed heat treatment furnaces, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 25-31, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Gresham, R.*, Hodgson, Peter, Smith, J.* and Cardew-Hall, M.* (2001) Data capture and analysis system for sheet metal forming problems, in Duflou, J.R.; Geiger, M.; Kals, H.J.J.; Shirvani, B. and Singh, U.P. (eds), Sheet metal 2001 : proceedings of the 9th International Conference held at the Katholieke Universiteit Leuven, Belgium, 2-4 April, 2001, pp. 521-527, ACCO C.V., Leuven, Belgium [E1]
DRO entry for this publication

Hodgson, Peter, Hurley, P.* and Kelly, Georgina (2001) The formation of ultrafine ferrite in low C steels through thermomechanical processing, in Takaki, S. and Maki, T. (eds), Proceedings of the International Symposium on Ultrafine Grained Steels (ISUGS 2001), pp. 10-17 [E1]
DRO entry for this publication

Kelly, Georgina and Hodgson, Peter (2001) Post-deformation softening and strain-induced transformation, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 63-68, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Scott-Murphy, A.*, Cardew-Hall, M.*, Kalyanasundaram, S.* and Hodgson, Peter (2001) Knowledge based optimisation techniques for sheet metal forming die design, in Mori, K. (eds), Proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes, pp. 751-756, A. A. Balkema, Leiden, Netherlands [E1]
DRO entry for this publication

Szyndler, D.*, Pietrzyk, M.* and Hodgson, Peter (2001) Identification of parameters in the internal variable constitutive model and friction model for hot forming of steels, in Mori, Ken-ichiro (eds), Simulation of materials processing : theory, methods and applications : proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001, pp. 297-302, A.A. Balkema, Lisse, The Netherlands [E1]
DRO entry for this publication

Timokhina, I., Hodgson, Peter and Pereloma, E.* (2001) The effect of Nb, Mo, and A1 additions on the transformation behaviour and mechanical properties of thermomechanically processed C-Si-Mn trip steel, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 57-62, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Vlahovic, S., Savage, S., Barnett, Matthew and Hodgson, Peter (2001) Warm net forging in the production environment, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 69-74, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Whale, J., Kelly, Georgina and Hodgson, Peter (2001) Dynamic transformation of ferrite to austenite to ferrite through deformation heating, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 81-86, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Zhang, S., Hodgson, Peter, Cardew-Hall, M.* and Kalyanasundaram, S.* (2001) The finite element modelling of rear suspension arm using an non-uniform friction law, in Mori, K. (eds), Simulation of materials processing : theory, methods and applications : proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001, pp. 633-638, A.A. Balkema, Lisse, The Netherlands [E1]
DRO entry for this publication

Campbell, P.*, Hodgson, P. and Cardew-Hall, M.* (2001) Optimisation of production decisions with stochastic process failures, in Hanus, D. and Talácko, J. (eds), ICPR 2001 : Proceedings of the 16th International Conference on Production Research, Czech Association of Scientific and Technical Societies, Prague, Czech Republic [E2]
DRO entry for this publication

de Ruyter, A., Cardew-Hall, M.* and Hodgson, P. (2001) Estimating quality costs in an automotive stamping plant through the use of simulation, in Hanus, D. and Talacko, J. (eds), ICPR 2001 : Proceedings of the 16th International Conference on Production Research, Czech Association of Scientific and Technical Societies, Prague, Czech Republic [E2]
DRO entry for this publication

Dingle, Matthew, Hodgson, Peter and Cardew-Hall, Michael* (2001) Effect of global and local stiffness on blankholder pressure in draw die forming, Proceedings of the SAE 2001 World Congresss, Society of Automotive Engineers, Inc [E2]
DRO entry for this publication

Fabijanic, D., Miller, C., Barnett, M., Cardew-Hall, M.*, Haynes, D.* and Hodgson, P. (2001) Investigation of tool finish direction and lubrication in the forming of cylindrical cups, in Duflou, J.R. (eds), SheMet 2001 : Proceedings of the 9th International Conference on Sheet Metal, pp. 101-108, Heverlee, Katholieke Universiteit Leuven, Departement Werktuigkunde, Leuven, Belgium [E2]
DRO entry for this publication

Gotzinger, Mary*, Kalyanasundaram, S.*, Hodgson, Peter and Cardew-Hall, Michael* (2001) A methodology for springback prediction, ATTCE 2001 proceedings volume 3 : manufacturing, Society of Automotive Engineers, Warrendale, Pa. [E2]
DRO entry for this publication

Kelly, G. and Hodgson, P. (2001) Dynamic transformation of ferrite to austenite to ferrite through large strain deformation, in Takaki, Setsuo (eds), ISUGS 2001 : Proceedings of the International Symposium on Ultrafine Grained Steels, pp. 96-99, The Iron and Steel Institute of Japan, Fukuoka, Japan [E2]
DRO entry for this publication

Scott, Robert, Wolfkamp, Henry*, Brownrigg, Allan and Hodgson, Peter (2001) Prediction of plastic set in sheet steel using variable radius springback measurement, in Baker, M. A. (eds), Mechanical working and steel processing : proceedings of the ... Mechanical Working and Steel Processing Conference and Symposium on New Metal Forming Processes, pp. 221-234, Gordon and Breach, New York, N.Y. [E2]
DRO entry for this publication

Timokhina, I., Hodgson, P. and Pereloma, E.* (2001) Morphology and stability of retained austenite in thermomechanically processed C-Mn-Si (-Nb) trip steels, Euromat 2001 : Proceedings of the European Congress and Exhibition on Advanced Materials and Processes, Associazione Italiana Di Metallurgia, Rimini, Italy [E2]
DRO entry for this publication

Dingle, Matthew, Hodgson, Peter and Cardew-Hall, M.* (2001) Analysis of the elastic behaviour of the press system in draw die forming, in Demeri, Mahmoud Y. (eds), Innovations in materials processing and manufacturing: sheet metals, TMS, Warrendale, Pa. [EN]
DRO entry for this publication

Campbell, Peter, Cardew-Hall, Matthew John* and Hodgson, Peter (2001) Production decisions and lot sizing for automotive stamping, Proceedings of the SAE 2001 World Congresss, pp. 1-6, Society of Automotive Engineers, United States [L1]
DRO entry for this publication

2001 Centre for Material and Fibre Innovation

Hickson, M.R.*, Hurley, P.J.*, Gibbs, R.K.*, Kelly, Georgina and Hodgson, Peter (2001) The production of ultrafine ferrite in low-carbon steel by strain-Induced transformation, Metallurgical and materials transactions A : physical metallurgy and materials science, vol. 33, no. 4, pp. 1019-1026, Minerals, Metals & Materials Society, Warrendale, PA [C1.1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036540804
Citation counts: Scopus - 53, Thomson - 37
DRO entry for this publication

2000 School of Engineering

Barnett, M., Kelly, G. and Hodgson, P. (2000) PREDICTING THE CRITICAL STRAIN FOR DYNAMIC RECRYSTALLIZATION USING THE KINETICS OF STATIC RECRYSTALLIZATION, Scripta Materialia, vol. 0, no. 0, pp. 365-369, Elsevier Science, Oxford [C1]
ERA journal ID: 4837 – Scopus EID: Not tagged
no DRO entry yet for this publication

Briggs, H. and Hodgson, P. (2000) The Changing Culture and Practice of Undergraduate Engineering Education in Australia, British Journal of Engineering Education, vol. 0, no. 0, pp. 31-41, Sheffied Hallam University Press, Sheffied [C1]
ERA journal ID: 40986 – Scopus EID: Not tagged
no DRO entry yet for this publication

Hodgson, P., Kelly, G. and Barnett, M. (2000) Recent Trends in the Thermomechanical Processing of Steel, Materials Forum: Materials and Processes of the 21st Century, vol. 0, no. 0, pp. 37-48, Institute of Materials Engineering Australasia Ltd, North Melbourne, Victoria, Australia [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hurley, P.*, Kelly, G. and Hodgson, P. (2000) Ultrafine ferrite formation during hot strip rolling, Materials Science and Technology, vol. 0, no. 0, pp. 1273-1276, Institute of Materials, United Kingdom [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hurley, P.*, Muddle, B.* and Hodgson, P. (2000) Microstructure and microtexture of ultrafine ferrite formed in 0.1%C steel using new strip rolling process, Materials Science and Technology, vol. 0, no. 0, pp. 1376-1379, Research Studies Press, UK [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Constitutive modelling of extrusion of lead with cyclic torsion, Materials Science and Engineering, vol. 0, no. 0, pp. 32-38, Elsevier Science, Lausanne [C1]
ERA journal ID: 4973 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Collinson, D.* (2000) Extrapolative prediction of the hot strength of austenitic steels with a combined constitutive and ANN model, Journal of Materials Processing Technology, vol. 0, no. 0, pp. 84-89, Elsevier Science, UK [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Predicting flow strength of austenitic steels with an IPANN model using different training strategies, Advances in Engineering Software, vol. 0, no. 0, pp. 945-954, Elsevier Science, Edinburgh, UK [C1]
ERA journal ID: 22083 – Scopus EID: Not tagged
no DRO entry yet for this publication

Campbell, P.*, Cardew-Hall, M.* and Hodgson, P. (2000) PRODUCTION DECISIONS AND LOT SIZING INCORPORATING RANDOM MACHINE FAILURES, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Cardew-Hall, M.*, Gresham, R.*, Hodgson, P. and Smith, J.* (2000) KNOWLEDGE CAPTURE SYSTEM FOR SHEET METAL FORMING PROBLEMS, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Doolan, M., Kalyanasundaram, S.*, Hodgson, P. and Cardew-Hall, M.* (2000) IDENTIFYING THE CAUSE OF VARIATION IN SHEET METAL STAMPING, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Fabijanic, D., Barnett, M., Hodgson, P. and Cardew-Hall, M.* (2000) Improving the Galling resistance of automotive stamping tools, in M. Pietrzyk, J. Kusiak and J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 641-646, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Hodgson, P. and Barnett, M. (2000) The thermomechanical processing of steels - Current status and future trends, in M. Pietrzyk, J. Kusiak and J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 21-28, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Nahavandi, S. (2000) Development of an Intelligent Decision Support System for Metal Forming Industry, in G. Altmann, J. Lamp, P. Mandal, R. Smith & M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 306-311, Deakin University, Geelong, Australia [E1]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Prediction of deformation force at different strains during steel rolling, in M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 263-267, Balkema, Rotterdam, Rotterdam [E1]
no DRO entry yet for this publication

Savage, S., Barnett, M. and Hodgson, P. (2000) Investigation into cold heading lubricants, in M. Pietrzyk, J. Kusiak & J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 569-575, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kalyanasundaram, S.* (2000) The Finite Element Simulation of Metal Forming Using Local Contact, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Barnett, M., Kelly, G. and Hodgson, P. (2000) Predictions of Dynamic Recrystallization in Aluminium Based on Static Recrystallization Data, in J. Kazadi and J. Masounave (eds), 39th Annual Conference of Metallurgists of CIMProceedings of the International Symposium on Light Metals, pp. 439-452, Canadian Institute of Mining, Metallurgy and Petro, Canada [E2]
no DRO entry yet for this publication

Beladi, H.*, Zarei-Hanzaki, A.*, Hodgson, P. and Yue, S.* (2000) Austenite Formation in Si-Mn TRIP Steels, in S. Yue and E. Es-sadiqi (eds), J.J. Jonas Symposium n Thermomechanical Processing of Steel (COM 2000), pp. 541-556, Canadian Institute of Mining, Metallurgy & Petroleum, Canada [E2]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (2000) ULTRAFINE FERRITE PRODUCTION BY STRAIN-INDUCED TRANSFORMATION, in M.A. Baker (ed.), 42nd Mechanical Working and Steel Processing Conference, pp. 515-522, Iron & Steel Society, USA [E2]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (2000) The production of fine-grained austenite and ferrite in steels through thermomechanical processing, in S. Yue and E. Es-sadiqi (eds), J.J. Jonas Symposium on Thermonuclear Processing of Steel, pp. 335-349, Canadian Institute of Mining, Metallurgy & Petroleum, Canada [E2]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Development of an artificial neural network model integrated with constitutive and FEM models, in P.Martin, S.Macewen, Y.Verreman, W.J. Liu, J. Goldak (eds), Mathematical Modeling in Metal Processing and Manufacturing, 2000 Conference of Metallurigists, Canada [E2]
no DRO entry yet for this publication

Timokhina, I., Hodgson, P. and Pereloma, E.* (2000) Effect of Deformation Schedule on the Microstructure and Mechanical Properties of Thermomechanically Processsed C-Mn-Si TRIP Steel, in M. Baker (ed.), 42nd Mechanical Working and Steel Processing Conference Proceedings, pp. 487-494, Iron & Steel Society, USA [E2]
no DRO entry yet for this publication

Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kalyanasundaram, S.* (2000) Micromechanical simulation of frictional behaviour in metal forming, in P. Martin, S. MacEwen, Y. Verreman, W. Lui and J. Goldak (eds), Mathematical Modeling in Metal Processing and Manufacturing, 2000 Conference of Metallurigists, Canada [E2]
no DRO entry yet for this publication

1999 School of Engineering

Hickson, M.* and Hodgson, P. (1999) Effect of preroll quenching and post-roll quenching on production and properties of ultrafine ferrite in steel., Materials Science & Technology, vol. 0, no. 0, pp. 85-90, The Institute of Materials, London [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hickson, M.*, Hodgson, P. and Gibbs, R.* (1999) The effect of chemistry on the formation of ultrafine ferrite in steel, ISIJ International, vol. 0, no. 0, pp. 1176-1180, The Iron and Steel Institute of Japan, Japan, Tokyo [C1]
ERA journal ID: 4722 – Scopus EID: Not tagged
no DRO entry yet for this publication

Hodgson, P., Kong, L. and Davies, C.* (1999) The Predication of Hot Strength in Steels with an Integrated Phenomenological and Artificial Neural Network Model., Journal of Materials Processing Technology, vol. 0, no. 0, pp. 1-8, Elsevier, Amsterdam [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
no DRO entry yet for this publication

Hodgson, P., Hickson, M.* and Gibbs, R.* (1999) Ultra fine ferrite in low carbon steel, Scripta Materialia, vol. 0, no. 0, pp. 1179-1184, Elsevier Science, USA [C1]
ERA journal ID: 4837 – Scopus EID: Not tagged
no DRO entry yet for this publication

Hurley, B.*, Hodgson, P. and Muddle, B.* (1999) Analysis & Characterisation of Ultra-fine Ferrite Produced During a New Steel Strip Rolling Process, Scripta Materialia, vol. 0, no. 0, pp. 433-438, Elsevier Science, USA [C1]
ERA journal ID: 4837 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (1999) The Application of Constitutive and Artificial Neural network Models to Predict the Hot Strength of Steels., ISIJ International, vol. 0, no. 0, pp. 991-998, ISIJ, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Wang, B. (1999) Development of Constitutive Models for Metal Forming with Cyclic Strain Softening, Journal of Materials Processing Technology, vol. 0, no. 0, pp. 44-50, Elsevier, Amsterdam [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
no DRO entry yet for this publication

Pereloma, E.*, Timokhina, I.* and Hodgson, P. (1999) Transformation behaviour in thermomechanically processed C-Mn-Si TRIP steels with and without Nb, Materials Science and Engineering, vol. 0, no. 0, pp. 448-452, Elsevier Science, SA, Amsterdam [C1]
ERA journal ID: 4973 – Scopus EID: Not tagged
no DRO entry yet for this publication

Staiger, M.*, Jessop, B.*, Hodgson, P., Brownrigg, A. and Davies, C.* (1999) Effect of nitrogen on formation of martensite-austenite constituent in low carbon steels., ISIJ International, vol. 0, no. 0, pp. 183-190, Iron and Steel Institute of Japan, Japan, Tokyo [C1]
ERA journal ID: 4722 – Scopus EID: Not tagged
no DRO entry yet for this publication

Wong, S.*, Thomson, P.* and Hodgson, P. (1999) Room temperature deformation & recrystallisation behaviour of lead and lead-tin alloys in torsion & plane strain compression, in Ulrich's (ed.), Materials Science & Technology, vol. 0, no. 0, pp. 689-696, Institute of Materials, London, UK [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Balatbat, J., Cardew-Hall, M. and Hodgson, P. (1999) A Systems Approach to Sheet Metal/Tool Surface Interface Incorporating Wear, Tooling 99, pp. 13-18, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Baliga, B., Hodgson, P. and Doyle, E.* (1999) Effect of contact length in off-round grinding., in J. Wang, W. Scott and L. Zhang (eds), ABTEC 99, pp. 116-123, World Scientific Publishing Co, Singapore [E1]
no DRO entry yet for this publication

Baliga, B., Hodgson, P. and Doyle, E.* (1999) Analysis of Punch Grinding Tools,, Tooling 99, pp. 7-11, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Doolan, M.*, Kalyanasundaram, S.*, Hodgson, P. and Cardew-Hall, M. (1999) Identifying-variation in sheet metal forming, in M. Geiger, H. Kals, B. Shirvani & U. Singh (eds), The International Conference on Sheet Metal, SHEMET 99, pp. 117-124, Meisenbach Bamberg, Germany [E1]
no DRO entry yet for this publication

Haynes, D., Barnett, M. and Hodgson, P. (1999) The Production of Zincanneal Coated Steels for Sheet Metal Forming, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999: Materials Processing, pp. 133-138, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Hodgson, P. (1999) Recent Developments in the Thermomechanical Processing of Steel, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 Materials Processing, pp. 87-94, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Hosking, T., Hill, B. and Hodgson, P. (1999) Shrinkage porosity assessment and minimisation in a grey iron casting., in EV Pereloma and GH Edward (eds), Materials Research Forum 1999, pp. 29-34, The Institute of Materials Engineering, North Melbourne, Victoria [E1]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (1999) Comparison of Static and Metadynamic Recrystallisation in Plain Carbon Steet, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 "Materials Processing" Proceedings, pp. 115-120, IMEA, Melbourne [E1]
no DRO entry yet for this publication

Martin, D.*, Mantyla, P.* and Hodgson, P. (1999) An analysis of friction in finish rolling of hot steel strip, Modelling of Metal Rolling Processes 3, pp. 150-159, The Institute of Materials, London, UK [E1]
no DRO entry yet for this publication

Murphy, A.*, Cardew-Hall, M.*, Hodgson, P. and Kalyanasundaram, S.* (1999) Novel criteria and tools for the Fe optimization of the sheet metal forming process, in J. Gelin & P. Picart (eds), Nummisheet, 4th International Conference on Numerical Simulation of 3D sheet forming processes, pp. 305-310, University of Franche-Comte & Ensmm, France [E1]
no DRO entry yet for this publication

Pereloma, E.*, Timokhina, I.* and Hodgson, P. (1999) TEM Characterisation of Microstructures Formed in Discontinuously Cooled C-Mn-Si (-Nb) Steels, in M. Koiwa, K. Otsuka and T. Miyazaki (eds), Solid-Solid Phase Transformations PTM '99, pp. 1513-1516, The Japan Institute of Metals Proceeding, Japan [E1]
no DRO entry yet for this publication

Savage, S., Kershaw, D. and Hodgson, P. (1999) Lubrication Coating Evaluation Technique for a Cold Heading Operation, in J.W.H. Price (ed.), Tooling 99, pp. 55-60, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Zhang, S., Hodgson, P., Cardew-Hall, M. and Kalyanasundaram, S.* (1999) Finite Element Modelling of Sheet Metal Forming, in J.W.H. Price (ed.), Tooling 99, Institute of Materials Engineering, Melbourne [E1]
no DRO entry yet for this publication

Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kambayashi, Y.* (1999) The Finite Element Simulation of Metal Forming with Improved Constitutive Equation for Local Contact., in D. Ho (ed.), The Thirteenth Australasian Compumod Users' Conference, pp. 1-19, Compumod Pty Ltd, Australia [E1]
no DRO entry yet for this publication

Cardew-Hall, M.*, Scott-Murphy, A.*, Hodgson, P. and Kalyanasundaram, S.* (1999) FEM Optimisation of sheet metal formings, in M. Demeri (ed.), Sheet metal forming technology, pp. 77-91, TMS, Pennsylvania [E2]
no DRO entry yet for this publication

Hodgson, P. and Mandal, P. (1999) A systems approach to rod and bar processing, in D. Kanagy (ed.), 41st Mechanical Working and Steel processing Conference, pp. 159-170, Iron and Steel Society, Warrendale, PA [E2]
no DRO entry yet for this publication

Kong, L., Hodgson, P., Lin, L. and Wang, B. (1999) Material Properties under Drawing and Extrusion with Cyclic Torsion, 2nd International Conference on Intelligent Processing and Manufacturing of Materials (IPMM 99), pp. 953-958, IEEE, Vancouver [E2]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (1999) Improving the Prediction Accuracy of Constitutive Model with ANN Models, 2nd International Conference on Intelligent Processing and Manufacturing of Materials (IPMM 99), pp. 389-394, IEEE, Vancouver [E2]
no DRO entry yet for this publication

Kong, L., Hodgson, P., Um, K. and Wang, B. (1999) Effect of modelling accuracy of hot strength on hot rolling, in J.H. Beynon et al (ed.), Modelling of Metal Rolling Processes 3, pp. 116-122, 10M Communications Ltd, London, UK [E2]
no DRO entry yet for this publication

Lin, L., Bathgate, R., Kong, L., Hodgson, P., Wang, B. and Lu, G.* (1999) The Effect of Die Design on the Extrusion with Combined Torsion, in J.W.H. Price (ed.), Tooling '99, pp. 45-49, Institute of Materials Engineering Australasia Ltd, Melbourne [E2]
no DRO entry yet for this publication

Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kalyanasundaram, S.* (1999) The Finite Element Simulation of Sheet Metal Forming with Local Friction Model, in M.H. Hanza (ed.), Proceedings of the IASTED International Conference Applied Modelling and Simulation., pp. 479-484, International Association of Science and Technology for Development/Acta Press, Anaheim, CA [E2]
no DRO entry yet for this publication

Hickson, M., Hurley, P.*, Kelly, G., Hodgson, P. and Barnett, M. (1999) Formation of Ultra-Fine Grained Steels, Proceedings of the Second Symposium on Super Metal, pp. 203-213, JRCM, Tokyo, Japan [L2]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (1999) Constitutive Analysis of Flow Strength of Austenitic Steels with the Integration of ANN Models, Progress in Mechanical Behaviour of Materials, Proceedings of the 8th Conference on the Mechanical Behaviour of Materials (ICM8), pp. 1071-1076, Fleming Printing Ltd, Victoria, Canada [L2]
no DRO entry yet for this publication

Kong, L., Li, L., Hodgson, P. and Wang, B. (1999) Behaviour of Materials under Combined Extrusion and Cyclic Torsion, Progress in Mechanical Behaviour of Materials, Proceedings of the 8th Conference on the Mechanical Behaviour of Materials (ICM8), pp. 195-200, Fleming Printing Ltd, Victoria, Canada [L2]
no DRO entry yet for this publication

1998 School of Engineering

Cizek, P.*, Wynne, B.*, Davies, C.*, Muddle, B.*, Hodgson, P. and Brownrigg, A. (1998) Effect of Composition and Prior Austenite Deformation on the Transformation Characteristics of Ultralow-Carbon Microalloyed Steels, Materials Science Forum, vol. 0, no. 0, pp. 177-184, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Herron, J.*, Hodgson, P. and Cardew-Hall, M.* (1998) Defining the Operating Window for an Automotive Sheet Pressing Operation, Materials Processing Technology, vol. 0, no. 0, pp. 68-75, Elsevier Science SA, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hodgson, P., Hickson, M.* and Gibbs, R.* (1998) The Production and Mechanical Properties of Ultrafine Ferrite, Materials Science Forum, vol. 0, no. 0, pp. 63-72, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hodgson, P. and Cardew-Hall, M.* (1998) Process and Product Integration: Research Challenges, Materials Processing Technology, vol. 0, no. 0, pp. 1-7, Elsevier Science SA, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hurley, P.*, Muddle, B.*, Hodgson, P., Davies, C.*, Wynne, B.*, Cizek, P.* and Hickson, M.* (1998) Comparison of the Deformation Characteristics of a Ni-30wt% Fe Alloy and Plain Carbon Steel, Materials Science Forum, vol. 0, no. 0, pp. 159-166, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Collinson, D.* (1998) Modelling the Effect of Carbon Content on Hot Strength of Steels Using a Modified Artificial Neural Network, ISIJ International, vol. 0, no. 0, pp. 1121-1129, Iron and Steel Inst. of Japan, "Tokyo, Japan" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Lanzon, J., Cardew-Hall, M.* and Hodgson, P. (1998) Characterising Frictional Behaviour in Sheet Metal Forming, Materials Processing Technology, vol. 0, no. 0, pp. 251-256, Elsevier Science SA, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Pereloma, E.*, Timokhina, I.* and Hodgson, P. (1998) Thee Effect of Si on the Microstructural Evolution of Discontinuously Cooled Strip Steels, Materials Science Forum, vol. 0, no. 0, pp. 237-244, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Pereloma, E.* and Hodgson, P. (1998) The Effect of Transformation Path on the Final Microstructure of High-and Low-Silicon 0.1 wt.% C Steels, Materials Science & Engineering A, vol. 0, no. 0, pp. 30-39, Elsevier, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Staiger, M.*, Davies, C.*, Hodgson, P., Jessop, B.* and Brownrigg, A.* (1998) Microalloying with Titanium to Improve Drawability in Low Carbon Wire-Rod Steels, Materials Science Forum, vol. 0, no. 0, pp. 575-582, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wang, B., Kong, L., Hodgson, P. and Collinson, D.* (1998) Improvement of the Prediction Accuracy and Efficiency of Hot Strength of Austenitic Steels with Optimised ANN Training Schemes, Metals and Materials, vol. 0, no. 0, pp. 823-826, Korean Institute of Metals and Materials, "Seoul, Korea" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wang, B., Hu, W., Kong, L. and Hodgson, P. (1998) The Influence of Rolling Speed on the Rolling of Metal Plates, Metals and Materials, vol. 0, no. 0, pp. 915-919, Korean Institute of Metals and Materials, "Seoul, Korea" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Baliga, B., Doyle, E.*, Hodgson, P. and Wang, B. (1998) Punch Grinding Torque Analysis, "Proceedings of the International Conference on Theoretical, Applied, Computational and Experimental Mechanics", Indian Institute of Technology, "Kharagpur, India" [E1]
no DRO entry yet for this publication

Balatbat, J., Lanzon, J., Cardew-Hall, M.* and Hodgson, P. (1998) Hard Chrome Plating Effects on Friction, Proceedings of Materials 98 [E2]
no DRO entry yet for this publication

Baliga, B., Doyle, E.* and Hodgson, P. (1998) Thermal Modelling of Punch Grinding, Materials '98, pp. 227-232, "Inst of Materials Eng, Australasia Ltd", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Burgess-Dean, L., Crawford, B. and Hodgson, P. (1998) A Mechanical Test for the Durability of Fired Clay Products Using Brinell Hardness Measurements, "The 5th Australasian Masonry Conference, July 1-3", pp. 37-46, Central Queensland University, "Gladstone, Qld Australia" [E2]
no DRO entry yet for this publication

Cizek, P.*, Wynne, B.*, Davies, C.*, Muddle, B.*, Killmore, C.* and Hodgson, P. (1998) Microstructural Characteristics of Mo-Containing Low- and Ultralow-Carbon Microalloyed Pipeline Steels, Proceedings of Materials 98, pp. 547-552, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Dingle, M., Crawford, B., Whale, J. and Hodgson, P. (1998) The Effect of Retained Strain on Ferrite Formation in C-Mn-Nb Steels, Proceedings of Materials 98, pp. 559-565, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Jaipal, J.*, Davies, C.*, Brownrigg, A., Yuen, W.* and Hodgson, P. (1998) Work Hardening and Strain Rate Sensitivity of 0.06WT%C Steel, Proceedings of Materials 98 [E2]
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Collinson, D.* (1998) Optimisation of ANN Models to Predict the Effect of Carbon Content on the Hot Strength of Austenite, Proceedings of Materials '98, pp. 553-558, "Institute of Materials Engineering, Australasia", Wollongong [E2]
no DRO entry yet for this publication

Kong, L., Collinson, D.* and Hodgson, P. (1998) Application of an Integrated Phenomenological Neural Network Model to Extrapolatively Predict the Hot Strength of Austenitic Steels, Steel Rolling '98, pp. 540-545, Iron & Steel Institute of Japan, Japan [E2]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (1998) Development of an ANN Model Strategy to Improve the Prediction of Flow Strength of Austenitic Steels, Advances in Engineering Computational Technology, pp. 155-164, Civil-Comp Press, "Edinburgh, UK" [E2]
no DRO entry yet for this publication

Lanzon, J., Cardew-Hall, M.* and Hodgson, P. (1998) Effect of Boundary Lubricant Regimes in Sheet Metal Forming, Proceedings of Materials 98, pp. 239-246, "Institute of Materials Engineering, Australasia L, "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Martin, D.* and Hodgson, P. (1998) Friction Modelling in the Hot Rolling of Steel Strip, Proceedings of Materials 98, pp. 253-258, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Wynne, B.*, Cizek, P.*, Hickson, M.*, Davies, C.*, Muddle, B.* and Hodgson, P. (1998) Texture in Cold-Rolled and Annealed Low-Carbon Microalloyed Steels, Proceedings of Materials 98, pp. 185-190, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

1997 School of Engineering

Hodgson, P., Staiger, M.*, Brownrigg, A.*, Davies, C.* and Jessop, B.* (1997) The Effects of Nitrogen on the Microstructural Evolution of Low Carbon Manganese Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 515-522, USA, USA [E1]
no DRO entry yet for this publication

Hodgson, P., Wynne, B.*, Collinson, D.* and Brownrigg, A.* (1997) Effect of Carbon Content on the Hot Flow Stress and Dynamic Recrystallisation Behaviour of Plain Carbon Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 539-545, "Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Cizek, P.*, Wynne, B.* and Muddle, B.* (1997) Microstructure Evolution in An Austenitic Stainless Steel Deformed in Hot Torsion Within the Dynamic Recovery Regime, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 709-715, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P. and Pereloma, E.* (1997) Microstructural Characterisation of Strip Steel after Simulated Thermomechanical Processing and Accelerated Cooling, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 803-809, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Cizek, P.*, Davies, C.*, Wynne, B.* and Muddle, B.* (1997) The Effects of Processing Parameters on the Mechanical Properties of Low Carbon Microalloyed Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 837-843, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Cizek, P.*, Wynne, B.* and Muddle, B.* (1997) Effect of Strain on the Transformation Characteristics of Low Carbon Microalloyed Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 875-881, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Zhang, X.* and Thomson, P.* (1997) The Stress Strain and Recrystallisation Behaviour for Deformation Involving a Change in Strain Path, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 1705-1711, "Minerals, Metals & Materials Society, USA", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Priestner, R.* and Frawley, L.* (1997) Effect of Sulphur in Thin Slab Cast Direct Rolled Mild Steel, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 2169-2175, "Minerals, Metals & Materials Society, USA", USA [E1]
no DRO entry yet for this publication

Hodgson, P. (1997) The Metadynamic Recrystallisation of Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 121-131, "Minerals, Metals and Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Wynne, B.*, Hurley, P.* and Muddle, B.* (1997) Microstructural Study of Softening Process in a Duplex Stainless Steel Deformed in Hot Torsion, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 387-393, "The Minerals, Metals and other Materials", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Collinson, D.* and Davies, C.* (1997) The Effect of Carbon on the Hot Deformation and Recrystallisation of Austenite, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 483-489, "The Minerals, Metals and Materials Society", USA [E1]
no DRO entry yet for this publication

Collinson, D.*, Hodgson, P. and Davies, C.* (1997) Development of Constitutive Models for the Hot Deformation Behaviour of Low and High Carbon Steels, Australiasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 1234-1240, IPMM'97, QLD [E2]
no DRO entry yet for this publication

Hodgson, P., Collinson, D.*, Davies, C.* and Kong, L. (1997) "The Application of Phenomenological, Empirical and Ann Models to the Prediction of Hot Strength in Steels.", Australiaasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 1248-1254, IPMM 97, QLD [E2]
no DRO entry yet for this publication

Hodgson, P., Crawford, B. and Pereloma, E.* (1997) Strain Induced Precipitation of Nbc During Hot Deformation, "7th International Symposium on Physical Simulation of Casting, Hot Rolling and Welding", pp. 185-191, Dynamic Systems Inc. & NRIM Japan, Japan [E2]
no DRO entry yet for this publication

Hodgson, P., Collinson, D.* and Perrett, B.* (1997) The use of Hot Torsion to Simulate the Thermomechanical Processing of Steel, Proceedings of the 7th International Symposium on Physical Simulation, pp. 219-229, Dynamic Systems Inc. & NRIM Japan, Japan [E2]
no DRO entry yet for this publication

Kong, L.X., Platfoot, R.A.*, She, F.H.* and Hodgson, P.D. (1997) Moisture transfer through porous textiles with temperature differences, Proceedings ATC '97 : the 4th Asian Textile Conference : Safe comfortable and ecological textiles for the 21st century's needs., pp. 654-660, The Conference, Taipei [E2]
DRO entry for this publication

Wang, A.*, Thomson, P.* and Hodgson, P. (1997) A Study of Pore Closure and Welding using Lead as a Model Material., Australiasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 1241-1247, IPPPM'97, QLD [E2]
no DRO entry yet for this publication

Zhang, X.*, Hodgson, P. and Thomson, P.* (1997) Incorporating the Effect of Change in Strain Path in Constitutive Models of Hot Deformation., Australiasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 941-947, IPMM'97, Qld [E2]
no DRO entry yet for this publication

1997 External

Hanzaki, Z.*, Hodgson, P.* and Yue, S.* (1997) Retained Austenite Characteristics in Thermechanically Processed Si-Mn Transformation-Induced Plasticity Steels., Metallurgical and Materials Transactions A, vol. 0, no. 0, pp. 2405-2414 [CN]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

1996 School of Engineering

Lloyd, B., Hodgson, P. and Baker, L. (1996) A Doctorate for Industrial Practitioners, Materials Australia, pp. 8-10 [D2]
no DRO entry yet for this publication

Barnett, M.*, Jonas, J.* and Hodgson, P. (1996) A Comparison Between the Recrystallization Behaviours of Warm and Cold Rolled Ferrite, "Proceedings of 37th MWSP Conference, ISS", pp. 971-978 [L1]
no DRO entry yet for this publication

Wang, A.*, Thomson, P.* and Hodgson, P. (1996) A Study of Pore Closure and Welding in Hot Rolling Process, Journal of Materials Processing Technology: 6th International Conference on Metal Forming, pp. 95-102, Elsevier Science [L1]
no DRO entry yet for this publication

Hodgson, P. (1996) Microstructure Modelling for Property Prediction and Control, Journal of Materials Processing Technology: 6th International Conference of Metal Forming, pp. 27-33, Elsevier Sciences [L2]
no DRO entry yet for this publication

1996 External

Hodgson, P.* (1996) Short Communication: Rapid Method for Determining the Effect of Process Variables on Recrystallisation, Materials Science and Technology, vol. 0, no. 0, pp. 788-790 [CN]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Maccagno, T.*, Jonas, J.* and Hodgson, P.* (1996) Spreadsheet Modelling of Grain Size Evolution During Rod Rolling, ISIJ International, vol. 0, no. 0, pp. 720-728, The Iron and Steel Institute of Japan, Japan [CN]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wong, S.*, Hodgson, P.*, Chong, C.* and Thomson, P.* (1996) "Physical Modelling with Application to Metal Working, Especially to Hot Rolling", Journal of Materials Processing Technology, vol. 0, no. 0, pp. 260-274, Elsevier Sciences [CN]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Zhang, X.*, Hodgson, P.* and Thomson, P.* (1996) The Effect of Through-Thickness Strain Distribution on the Static Recrystallization of Hot Rolled Austenitic Stainless Steel Strip, Journal of materials Processing Technology: 6th International Conference on Metal Forming, vol. 0, no. 0, pp. 615-619, Elsevier Science [CN]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Muddle, B*, Hodgson, P, Schaffer, G*, Ferry, M*, Ringer, S*, Xia, K*, Nie, J*, Davies, C*, Hutchinson, C*, Barnett, M, Dahle, A*, Caceres, C*, Hoffman, M*, Dunlop, G*, Couper, M*, Embury, J*, Loretto, M*, Humphries, F*, Arnberg, L*, Estrin, Y*, Fraser, H* and Brechet, Y*. Design in Light Metals, ARC Centre - Centres of Excellence [T]

  • 2013: $631,733
  • 2012: $497,330
  • 2011: $497,330
  • 2010: $378,436
  • 2009: $548,803
  • 2008: $609,384
  • 2007: $497,330
  • 2006: $497,330

Hodgson, P. Metal Processes and Products for a Sustainable Future, ARC Fellowship - Australian Laureate Fellowship [T]

  • 2013: $444,420
  • 2012: $467,382
  • 2011: $450,066
  • 2010: $428,084
  • 2009: $217,039

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet, ARC Collaborative - Linkage - Projects (Round 1), Linkage PhD student, Linkage PhD student [T]

  • 2013: $75,490
  • 2012: $103,848

Rolfe, B, Hodgson, P, Forsyth, M, Xiang, Y, Doolan, M* and Pereira, M. Developing an environmentally friendly, low cost solution to reduce wear and improve productivity in metal forming, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2013: $104,207
  • 2012: $163,652

Wu, X* and Hodgson, P. Manufacture of a small areo-engine entirley through additive manufacturing ( to internationally showcase Australias unique scientific, materials development, manufacturing and systems integration capa, Science and Industry Endowment Fund (SIEF) [T]

  • 2013: $26,250

Wu, X*, Hodgson, P and Zhang, X*. Australia-China Research Centre for Light Metals, DIISR Australia-China Science and Research Fund - Department of Innovation, Industry and Regional Development [T]

  • 2013: $3,338

Hodgson, P, Kong, L, Dumee, L and Lin, B. Bao Lin NCED Scholarship - Design and characterisation of novel nano-porous metal membranes by specific metal allow films de-alloying, National Centre of Excellence in Desalination - Scholarship [T]

  • 2013: $10,000

Ferry, M*, Stanford, N, Hodgson, P, Laws, K* and Quadir, M*. Reducing the environmental impact of steel making through direct strip casting, ARC Collaborative - Linkage - Projects (Round 2) [T]

  • 2013: $15,000

Hodgson, P, Stanford, N and Pereloma, E*. Advanced high strength steels produced by energy efficient direct strip casting, ARC Grant - Discovery Projects [T]

  • 2013: $105,771

Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry [T]

  • 2012: $13,611
  • 2010: $63,321
  • 2009: $148,643
  • 2008: $150,898
  • 2007: $63,766

Hodgson, P, Beynon, J*, Strezov, L*, Stanford, N, Dippenaar, R*, Sietsma, J* and Thijsse, B*. Development of new steel products by thin strip casting and direct thermomechanical processing, ARC Grant - Discovery Projects [T]

  • 2011: $177,720
  • 2010: $127,578
  • 2009: $164,147
  • 2008: $149,000

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products, ARC Collaborative - Linkage - Projects (Round 2, APAI) [T]

  • 2011: $40,462
  • 2010: $79,668
  • 2009: $78,050
  • 2008: $38,250

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2011: $26,140
  • 2010: $26,140
  • 2009: $26,140

Wen, C* and Hodgson, P. Developing Biodegradable Magnesium Alloys for Implant Materials, DoIIS&R Grant - Australia-India Strategic Research Fund [T]

  • 2011: $20,000
  • 2010: $85,000

Timokhina, I, Hodgson, P and Timokhina, I*. A Microstructure Based Approach to Steel Design for Improved Crash Performance, ARC Grant - Discovery Projects [T]

  • 2010: $98,376
  • 2009: $118,333
  • 2008: $130,485
  • 2007: $147,936

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, ARC_DUAPAI2 ARC_Deakin University Australian Postgraduate Award Industry Second [T]

  • 2009: $25,364
  • 2008: $69,288
  • 2007: $78,047
  • 2006: $182,166
  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, ARC Fellowship - Discovery - Federation Fellowship [T]

  • 2009: $167,871
  • 2008: $329,089
  • 2007: $322,625
  • 2006: $316,222
  • 2005: $310,325
  • 2004: $155,527

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology, Department of Innovation, Industry and Regional Development Grant - Centre of Excellence Project [T]

  • 2008: $139,333
  • 2007: $235,000

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2007: $50,000
  • 2006: $50,000
  • 2005: $50,000

Hodgson, P. Ductile Bulk Metallic Glass Composites, Australian Research Council - Linkage International [T]

  • 2007: $10,396
  • 2006: $5,000

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2006: $85,179
  • 2005: $78,367
  • 2004: $76,755

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Research Income - Other Public Sector Funding

Parratt, A and Hodgson, P. Microfluidic Devices for Pedigree Analysis [U]

  • 2013: $10,000

Hodgson, P. Development of a Single Piece Carbon Fibre Wheel [U]

  • 2010: $17,500
  • 2009: $65,000

Wen, C* and Hodgson, P. Developing Biodegradable Magnesium Alloys for Implant Materials [U]

  • 2009: $120,000

Hodgson, P and Sudharsan, R. The Crash Behaviour of Advanced Steels and Alloys [U]

  • 2008: $33,000

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology [U]

  • 2006: $125,667

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Research Income - Industry and Other Funding

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V]

  • 2013: $-150,364
  • 2012: $63,818
  • 2011: $104,530

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V]

  • 2013: $25,000
  • 2012: $5,000

Rolfe, B, Hodgson, P, Forsyth, M, Xiang, Y, Doolan, M* and Pereira, M. Developing an environmentally friendly, low cost solution to reduce wear and improve productivity in metal forming [V]

  • 2013: $183,000

Hodgson, P. The analysis of 10 iron allow samples using spectrometer technology [V]

  • 2013: $0

Stanford, N, Hodgson, P, Wen, C*, Beynon, J*, Chen, Y, Pereloma, E*, Beladi, H, Hutchinson, C*, Timokhina, I, Dippenaar, R*, Pigram, P*, Davies, C* and Nie, J*. Investigating materials on the atomic scale using 3-dimensional atom probe tomography [V]

  • 2012: $450,000

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products [V]

  • 2011: $20,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2010: $18,400
  • 2009: $20,000
  • 2008: $25,000
  • 2007: $60,000
  • 2006: $50,000
  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2010: $26,250
  • 2009: $52,500
  • 2008: $17,500
  • 2007: $35,000
  • 2006: $35,000
  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication [V.1]

  • 2010: $15,000
  • 2009: $15,000
  • 2008: $15,000

Hodgson, P and Fabijanic, D. Novel Fluidised Bed Duplex Surface Treatments for Ferrous Materials [V.1]

  • 2010: $-33,546
  • 2009: $122,929
  • 2008: $61,732

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products [V.1]

  • 2010: $30,000
  • 2009: $30,000

Fabijanic, D, Hodgson, P and Reuben, J*. The carburising resistance of nickel and iron aluminide surface layers [V.1]

  • 2010: $6,600

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2009: $18,980
  • 2008: $25,872
  • 2007: $95,761
  • 2006: $77,880
  • 2005: $73,786

Gao, W and Hodgson, P. Simulation of the Heat Treatment Process Intensified by Solid Particles [V.1]

  • 2006: $10,000

Research Income - Industry and Other Funding - International A (Competitive, Peer-Reviewed Research Grant Income)

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling [V.2]

  • 2012: $6,000
  • 2011: $6,000

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V.3]

  • 2013: $35,000
  • 2012: $35,000

Hodgson, P, Kong, L, Barnett, M and Rolfe, B. Cold Stamping of Advanced High Strength Steels [V.3]

  • 2013: $50,000
  • 2012: $50,000

Hodgson, P and Dingle, M. Predicting tool life issues of AHSS stampings. [V.3]

  • 2009: $50,290
  • 2008: $44,881

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling [V.3]

  • 2009: $6,000

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Wang, X, Hodgson, P and Kirkland, M. Development of Macroporous Scaffolds for Biomedical Applications, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $114,176
  • 2012: $52,101
  • 2011: $132,136
  • 2010: $862,627
  • 2009: $58,000

Hodgson, P, Stanford, N, Phelan, D, Gray, D and Collins, P. Compact Alloy Processing in a Micro Mill Environment, CRC_CAST Grant - Research [X]

  • 2013: $11,411
  • 2012: $103,012
  • 2011: $208,621
  • 2010: $123,621

Keshavarz, Z and Hodgson, P. Lightweight Vehicle Structures 3-102 from High Strength Metals - CECAP Research Project, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2013: $195,930
  • 2012: $0

Hodgson, P and Fox, B. Project 2.1a - FR-1 Complex Composite Components for Load Bearing Applications, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2012: $0
  • 2011: $328,040
  • 2010: $175,707

Nahavandi, S and Hodgson, P. Auto CRC Initial Project 12, Virtual Training, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2011: $0
  • 2010: $165,876
  • 2009: $417,799
  • 2008: $261,198
  • 2007: $383,940

Hilditch, T and Hodgson, P. Auto CRC - MDO C4-04, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2011: $0
  • 2010: $10,981
  • 2008: $20,132

Hodgson, P, Dunstan, D*, Sandlin, J and Naebe, M. Project 1.1b - Next Generation Armour Technologies, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2011: $0
  • 2010: $80,626

Fabijanic, D, Hodgson, P and Cicak, I. Project 1.9a Novel Fluidised Bed Reactor Surface Modification Technology for Ferrous and Light Metals., CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2011: $105,728
  • 2010: $283,900

Hodgson, P and Sudharsan, R. The Crash Behaviour of Advanced Steels and Alloys, CRC for Advanced Auto Technology - Scholarship, CRC for Advanced Auto Technology - Scholarship [X]

  • 2010: $26,356
  • 2009: $33,000

Hodgson, P and Nikhare, C. The development of low cost, complex shapes from advanced high strength steels using low pressure hydroforming, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2010: $3,354
  • 2009: $13,000
  • 2008: $8,000

Dingle, M and Hodgson, P. Business Development Activities, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2010: $9,983
  • 2009: $37,500
  • 2008: $12,500

Hilditch, T and Hodgson, P. Auto CRC Initial Project 14, Rapid Tooling Development, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $20,441
  • 2007: $56,910

Hodgson, P. Light Metals Prototype Structures, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $16,372

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2006: $74,162
  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Higher Degree by Research Completions supervised by Peter Hodgson

2013

Yang An
Doctor of Philosophy, Thesis entitled: Automotive Engineering Metal Foam Structures: Fabrication, Characterisation, Testing and Simulation.
Institute for Frontier Materials Requires an Internet connection

Ashley James Denmead
Doctor of Philosophy, Thesis entitled: Improved fracture toughness of fire resistant composites through rapid curing.
Institute for Frontier Materials Requires an Internet connection

Subhash Sista
Doctor of Philosophy, Thesis entitled: Role of surface properties of titanium alloys on osteoblasts response.
Institute for Frontier Materials Requires an Internet connection

Jiangting Wang
Doctor of Philosophy, Thesis entitled: Mechanical Behaviour of Metallic Thin Films and Multilayers at the Micron/submicron Scale.
Institute for Frontier Materials Requires an Internet connection

Frank Will
Doctor of Philosophy, Thesis entitled: Fuel Consumption- and Emission Analysis of Exhaust Heat Recovery Systems. School of Engineering and Information Technology

2012

Subrata Mukherjee
Doctor of Philosophy, Thesis entitled: Nanoscale Precipitation in Advanced High Strength Steels.
Institute for Frontier Materials Requires an Internet connection

Ranjani Sudharsan
Doctor of Philosophy, Thesis entitled: Development of Novel Crash Structures.
Institute for Frontier Materials Requires an Internet connection

Jeerachai Supasuthakul
Doctor of Philosophy, Thesis entitled: Modelling of Bending-dominated Forming Processes of Metal Sheets.
Institute for Frontier Materials Requires an Internet connection

2011

Sadaf Kashef
Doctor of Philosophy, Thesis entitled: Biomechanical Properties of Porous Metal Scaffolds as Implant Materials.
Institute for Frontier Materials Requires an Internet connection

Leigh Robertson
Doctor of Philosophy, Thesis entitled: Fatigue Characterisation of HSS and AHSS.
Institute for Frontier Materials Requires an Internet connection

Dengke Yang
Doctor of Philosophy, Thesis entitled: Nanograin Metals and Metallic Multilayers Produced by Severe Plastic Deformation.
Institute for Frontier Materials Requires an Internet connection

2010

Paul Collins
Doctor of Philosophy, Thesis entitled: CAE Crash Analysis of Structures in Oblique Loading.
Institute for Frontier Materials Requires an Internet connection

Shokoufeh Malekjani
Doctor of Philosophy, Thesis entitled: Cyclic Deformation Behaviour of Nanostructure Al.
Institute for Frontier Materials Requires an Internet connection

Chetan Nikhare
Doctor of Philosophy, Thesis entitled: Formability and Forming of Advanced Steels.
Institute for Frontier Materials Requires an Internet connection

Adam Taylor
Doctor of Philosophy, Thesis entitled: Study of the Deformation Behaviour of Austenite via Model Alloys.
Institute for Frontier Materials Requires an Internet connection

Nima Yazdipour
Doctor of Philosophy, Thesis entitled: Microscale Modelling of AISI 304 Behaviour During Hot Deformation.
Institute for Frontier Materials Requires an Internet connection

2009

Seyed Alireza Asgari
Doctor of Philosophy, Thesis entitled: Numerical Modelling of Advanced High Strength Steels .
Institute for Frontier Materials Requires an Internet connection

2008

Adnan Teletovic
Doctor of Philosophy, Thesis entitled: Turbulent Filling of Iron Castings. Centre for Material and Fibre Innovation

2007

Ali Dehghan-Manshadi
Doctor of Philosophy, Thesis entitled: The Evolution of Recrystallization During and Following Hot Deformation. Centre for Material and Fibre Innovation

Kariyawasam Nanayakkara
Doctor of Philosophy, Thesis entitled: Experimental Analysis of Friction in Forming Automotive Coated Steels. Centre for Material and Fibre Innovation

Ali-Reza Shokouhi
Doctor of Philosophy, Thesis entitled: The Mechanisms of Dynamic Strain Induced Transformation and Post-Deformation Evolution. Centre for Material and Fibre Innovation

Dongye Fei
Master of Engineering, Thesis entitled: Springback Behaviour of TRIP Steels in Sheet Metal Forming. Centre for Material and Fibre Innovation

2006

Jonathan Mullins
Doctor of Philosophy, Thesis entitled: Testing and Modelling to Obtain Material Behaviour for Crash Simulations. Centre for Material and Fibre Innovation

Matthias Weiss
Doctor of Philosophy, Thesis entitled: An Investigation on the Forming Behaviour of Metal/Polymer Laminates. Centre for Material and Fibre Innovation

Graham Hawkins
Doctor of Technology, Thesis entitled: Opportunity and Risk Management for Complex Oil and Gas Developments. Centre for Material and Fibre Innovation

2005

Weimin Gao
Doctor of Philosophy, Thesis entitled: Heat and Mass Transfer in Fluidised Bed Heat-Treatment Furnaces.
School of Engineering Requires an Internet connection

Dragos Petrescu
Doctor of Philosophy, Thesis entitled: Prediction of Ductile Fracture in the Cold Forging of Steel.
School of Engineering Requires an Internet connection

2004

Hossein Beladi
Doctor of Philosophy, Thesis entitled: Ultrafine Ferrite Formation in Steels through Thermomechanical Processing.
School of Engineering Requires an Internet connection

Daniel Fabijanic
Doctor of Philosophy, Thesis entitled: A Nitrocarburising and Low-Temperature Chromising Duplex Surface Treatment.
School of Engineering Requires an Internet connection

Aaron Walsh
Doctor of Philosophy, Thesis entitled: Mathematical Modelling of the Crankshaft Pin Grinding Process.
School of Engineering Requires an Internet connection

2003

Ilana Timokhina
Doctor of Philosophy, Thesis entitled: Microstructure and Mechanical Properties of TRIP Steels.
School of Engineering Requires an Internet connection

Wilbur Harvey
Doctor of Technology, Thesis entitled: Advanced Technology and Economies of Scale in the Cement Industry.
School of Engineering Requires an Internet connection

Adam De Ruyter
Master of Engineering, Thesis entitled: Development of a Quality Cost Model for Automotive Stamping.
School of Engineering Requires an Internet connection

2002

Matthew Dingle
Doctor of Philosophy, Thesis entitled: Elastic Behaviour in Mechanical Draw Presses.
School of Engineering Requires an Internet connection

Timothy Hilditch
Doctor of Philosophy, Thesis entitled: Sheared-Edge Quality in the Trimming of Sheet Metals.
School of Engineering Requires an Internet connection

Stuart Palmer
Doctor of Technology, Thesis entitled: An Evaluation of Australian Undergraduate Engineering Management Education for Flexible Delivery.
School of Engineering Requires an Internet connection

David Haynes
Master of Engineering, Thesis entitled: Press Forming Performance of Galvanneal Coated Steel.
School of Engineering Requires an Internet connection

Christopher Miller
Master of Engineering, Thesis entitled: Tailoring a Lubricant for use with ZINCANNEAL® Steel.
School of Engineering Requires an Internet connection

2001

Scott Savage
Master of Engineering, Thesis entitled: Evaluation of Cold Forming Lubricants for Fastener Manufacturing.
School of Engineering Requires an Internet connection

2000

Dennis Brockenshire
Doctor of Technology, Thesis entitled: The Introduction, Management and Assessment of Change Processes at Barwon Water - A Technology Based Water Authority.
School of Engineering Requires an Internet connection

Jon Hodson
Doctor of Technology, Thesis entitled: Development of an Evaluation Approach to Excellence in the Australian Manufacturing Industry.
School of Engineering Requires an Internet connection

Jesus Balatbat
Master of Engineering, Thesis entitled: Robust Surface Practices for Sheet Metal Forming Dies.
School of Engineering Requires an Internet connection

Natasha Skoric
Master of Engineering, Thesis entitled: Effects of Aging Bake Hardenable Steel in Sheet Metal Forming.
School of Engineering Requires an Internet connection

1999

David Dombkins
Doctor of Technology, Thesis entitled: PROJAM: The Management of Complex Projects and Programs.
School of Engineering Requires an Internet connection

Joseph Lanzon
Master of Science, Thesis entitled: Evaluating Lubricants in Sheet Metal Forming.
School of Engineering Requires an Internet connection

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Friday 22nd August 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011