Research Output for Georgina Kelly
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
2012 Institute for Frontier Materials
Okonkwo, Paul C., Kelly, Georgina, Rolfe, Bernard F. and Pereira, Michael P. (2012) The effect of temperature on sliding wear of steel-tool steel pairs, Wear, vol. 282-283, pp. 22-30, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84858702686DRO entry for this publication
2011 Institute for Frontier Materials
Gilbert, Michael J.*, Awaja, Firas, Kelly, Georgina L., Fox, Bronwyn L., Brynolf, Russell* and Pigram, Paul J.* (2011) Tailoring the surface chemistry of carbon fiber and E-glass composites for improved adhesion, Surface and interface analysis, vol. 43, no. 5, pp. 856-864, John Wiley & Sons Ltd, Oxford, England [C1]
ERA journal ID: 1506 – Scopus EID: 2-s2.0-79953716257Okonkwo, Paul C., Pereira, Michael P., Kelly, Georgina and Rolfe, Bernard F. (2011) Effects of temperature in relation to sheet metal stamping, in Mastorakis, Nikos; Mladenov, Valeri; Lepadatescu, Badea; Karimi, Hamid Reza and Helmis, Costas G. (eds), MEQAPS 2011 : Proceedings of the 4th International Conference on Manufacturing Engineering, Quality and Production Systems, pp. 114-118, World Scientific and Engineering Academy and Society (WSEAS), Barcelona, Spain [E1]
2010 Institute for Frontier Materials
Awaja, Firas, Gilbert, Michael*, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2010) Exploring molecular changes at the surface of polypropylene after accelerated thermomolecular adhesion treatments, ACS applied materials & interfaces, vol. 2, no. 5, pp. 1505-1513, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 40638 – Scopus EID: 2-s2.0-77954969606
Citation counts:Scopus - 1,
Thomson - 1
2009 Institute for Frontier Materials
Awaja, Firas, van Riessen, Grant*, Fox, Bronwyn, Kelly, Georgina and Pigram, Paul J.* (2009) Time-of-flight secondary ion mass spectrometry investigation of epoxy resin curing behavior in real time, Journal of applied polymer science, vol. 113, no. 5, pp. 2765-2776, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-67649997262
Citation counts:Awaja, Firas, Gilbert, Michael*, Fox, Bronwyn, Kelly, Georgina and Pigram, Paul J.* (2009) Investigation of the postcure reaction and surface energy of epoxy resins using time-of-flight secondary ion mass spectrometry and contact-angle measurements, Journal of applied polymer science, vol. 113, no. 5, pp. 2755-2764, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-67650000481
Citation counts:Awaja, Firas, Gilbert, Michael*, Kelly, Georgina, Fox, Bronwyn and Pigram, Paul J.* (2009) Adhesion of polymers, Progress in polymer science, vol. 34, no. 9, pp. 948-968, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1701 – Scopus EID: 2-s2.0-69249206821
Citation counts:2008 Centre for Material and Fibre Innovation
Awaja, Firas, Gilbert, M.*, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2008) Surface properties of polypropylene following a novel industrial surface-treatment process, Surface and interface analysis, vol. 40, no. 11, pp. 1454-1462, John Wiley & Sons, Oxford, England [C1]
ERA journal ID: 1506 – Scopus EID: 2-s2.0-55649111887
Citation counts:Awaja, Firas, van Riessen, Grant*, Kelly, Georgina, Fox, Bronwyn and Pigram, Paul J* (2008) ToF-SIMS investigation of epoxy resin curing reaction at different resin to hardener ratios, Journal of applied polymer science, vol. 110, no. 5, pp. 2711-2717, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-56749103927
Citation counts:2007 Centre for Material and Fibre Innovation
Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) Ultrafine grained structure formation in steels using dynamic strain induced transformation processing, International materials reviews, vol. 52, no. 1, pp. 14-28, Maney Publishing, London, England [C1]
ERA journal ID: 4910 – Scopus EID: 2-s2.0-33847062908
Citation counts:Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) The effect of multiple deformations on the formation of ultrafine grained steels, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 38, no. 3, pp. 450-463, Minerals, Metals & Materials Society, Warrendale, PA. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-34250765772
Citation counts:2006 School of Engineering and Information Technology
Herring, Mandy, Kelly, Georgina, Mardel, J.*, Hodgkin, J.* and Fox, Bronwyn (2006) Surface analysis of carbon fibre composite laminates for automotive body panels, in Bandyopadhyay, Sri; Zeng, Qinghua; Berndt, Christopher; Rizkalla, Sami; Gowripalan, N.; Matisons, Janis and Samudrala, Saritha (eds), Developments in composites : advanced, infrastructural, natural & nano-composites, pp. 590-595, University of New South Wales, Sydney, N.S.W. [E1]
2006 Centre for Material and Fibre Innovation
Rolfe, Bernard, Frayman, Yakov, Kelly, Georgina and Nahavandi, Saeid (2006) Recognition of lubrication defects in cold forging process with a neural network, in Kamruzzaman, Joarder; Begg, Rezaul and Sarker, Ruhul (eds), Artificial neural networks in finance and manufacturing, pp. 262-275, Idea Group Publishing, Hershey, PA [B1]
2005 School of Engineering
Fabijanic, Dan, Kelly, Georgina, Long, John and Hodgson, Peter (2005) A nitrocarburising and low-temperature chromising duplex surface treatment, Materials forum, vol. 29, pp. 77-82, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal listHodgson, Peter, Beladi, Hossein and Kelly, Georgina (2005) Development of ultrafine grained steels through thermomechanical processing, Canadian metallurgical quarterly, vol. 44, no. 2, pp. 179-185, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada [C1]
ERA journal ID: 4714 – Scopus EID: 2-s2.0-29844432174
Citation counts:Nanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming, Materials forum, vol. 29, pp. 114-118, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal listHerring, M.L., Kelly, G.L., Mardel, J.I.*, Forrest, M.A., Law, H.* and Fox, B.L. (2005) Composites for automotive body panels, Materials Australia, vol. 38, no. 2, pp. 12-13, Great Southern Press, Melbourne, Vic. [C3.1]
ERA journal ID: Not matching ERA journal listNanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) A qualitative and quantitative investigation of the surface tribology in forming galvanneal steel, in Xie, M.; Mouritz, A.; Khatibi, A. A.; Gardiner, C. and Chiu, W. K. (eds), Advances in applied mechanics : proceedings of the fourth Australasian Congress on Applied Mechanics Applied Mechanics, pp. 357-362, Institute of Materials Engineering Australasia, North Melbourne, Vic [E1]
Herring, Mandy L, Kelly, Georgina L, Mardel, James I* and Fox, Bronwyn L (2005) Surface analysis of environmentally exposed painted composites manufactured from Quickstep and autoclave processes, in Unknown (ed.), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference 2005, pp. 220-225, SAMPE Europe Business Office, Paris, France [E1.1]
2004 School of Engineering
Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing, Materials transactions, vol. 45, no. 7, pp. 2214-2218, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-4544244971
Citation counts:Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) The evolution of ultrafine ferrite formation through dynamic strain-induced transformation, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 371, no. 1, pp. 343-352, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-16544369376
Citation counts:Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling, Materials science and technology, vol. 20, no. 12, pp. 1538-1544, Maney Publishing, Leeds, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 367, pp. 152-161, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0942269403
Citation counts:Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained microstructures in steel through strain induced transformation during single pass hot rolling, Materials science and technology, vol. 20, no. 2, pp. 213-220, The Institute, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Nanayakkara, N., Kelly, Georgina and Hodgson, Peter (2004) Determination of the coefficient of friction in partially penetrated draw beads, Steel grips, vol. 2, no. Supplement, pp. 677-680, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not taggedZhu, B., Mardel, J.* and Kelly, Georgina (2004) An investigation of tribological properties of CN and TiCN coatings, Journal of materials engineering and performance, vol. 13, no. 4, pp. 481-487, Springer, Berlin, Gemany [C1]
ERA journal ID: 4794 – Scopus EID: 2-s2.0-4344577292Zhu, B. and Kelly, Georgina (2004) Frictional behaviour and wear performance of a nitrocarburised coating sliding against AISI 1019 steel, Materials forum, vol. 27, pp. 54-61, Institute of Materials Engineering Australasia Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal listFabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2004) Development of a duplex surface treatment using fluidised bed technololgy, Materials Australia, vol. 37, no. 1, pp. 12-15, Institute of Metals and Materials Australasia Ltd, Parkville, Vic. [C3]
ERA journal ID: Not matching ERA journal listNanayakkara, M., Kelly, G. and Hodgson, P. (2004) Effect of contact pressure and lubrication on the coating characteristics, surface tribology and friction in forming zince coated sheet steel, in Haque, E.; Haseeb, A.; Rashid, A.; Islam, M. and Moniruzzaman, M. (eds), SPPM 2004 : Proceedings of the 2nd International Conference on Structure, Processing and Properties of Materials, pp. 313-320, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh [E2]
2003 School of Engineering
Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2003) Formation of ultra-fine ferrite by deformation of austenite during single pass rolling, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 252-257, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
Hodgson, Peter, Barnett, Matthew, Beladi, Hossein and Kelly, Georgina (2003) The production of ultrafine grained steels by thermomechanical processing, in Palmiere, E. J.; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 170-175, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
2002 School of Information Technology
Rolfe, Bernard, Frayman, Yakov, Hodgson, Peter, Webb, G.I. and Kelly, Georgina (2002) Fault detection in a cold forging process through feature extraction with a neural network, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED Conference, pp. 155-159, ACTA Press, New York, N.Y [E1]
2002 School of Engineering
Barnett, Matthew, Kelly, Georgina and Hodgson, Peter (2002) Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 33A, no. 7, pp. 1893-1900, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036650051Kelly, Georgina, Beladi, Hossein and Hodgson, Peter (2002) Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel, ISIJ international, vol. 42, no. 12, pp. 1585-1590, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-0036994014
Citation counts:Fabijanic, Dan, Kelly, Georgina, Cardew-Hall, Michael* and Hodgson, Peter (2002) Galling reduction through die surface treatment - testing three treatments for sheet metal stamping, Stamping journal, vol. 14, no. 2, pp. 30-31, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal listKelly, Georgina and Hodgson, Peter (2002) Grain refinement through thermomechanical processing, in Bott, Ivani (eds), Aços : perspectivas para os próximos 10 anos, pp. 89-94, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil [E2]
2001 School of Engineering
Burgess-Dean, L., Kelly, Georgina and Crawford, B. (2001) A mechanical test for the durability of fired clay products using compressive strength and indentation hardness tests, in Griffith, Michael (eds), Proceedings of the 6th Australasian Masonry Conference, Adelaide, South Australia, 12-13 July 2001, pp. 83-94, Adelaide University, Adelaide, S.Aust. [E1]
Burgess-Dean, L., Crawford, B. and Kelly, Georgina (2001) The resistance to salt attack compared with the material properties of fired clay products, in Griffith, Michael (eds), Proceedings of the 6th Australasian Masonry Conference, pp. 73-82, Adelaide University, Adelaide, S. Aust. [E1]
Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2001) Combating adhesive wear in automotive stamping, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 237-242, IMEA, Melbourne, Vic [E1]
Hodgson, Peter, Hurley, P.* and Kelly, Georgina (2001) The formation of ultrafine ferrite in low C steels through thermomechanical processing, in Takaki, S. and Maki, T. (eds), Proceedings of the International Symposium on Ultrafine Grained Steels (ISUGS 2001), pp. 10-17 [E1]
Kelly, Georgina and Hodgson, Peter (2001) Post-deformation softening and strain-induced transformation, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 63-68, IMEA, Melbourne, Vic [E1]
Whale, J., Kelly, Georgina and Hodgson, Peter (2001) Dynamic transformation of ferrite to austenite to ferrite through deformation heating, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 81-86, IMEA, Melbourne, Vic [E1]
Kelly, G. and Hodgson, P. (2001) Dynamic transformation of ferrite to austenite to ferrite through large strain deformation, in Takaki, Setsuo (eds), ISUGS 2001 : Proceedings of the International Symposium on Ultrafine Grained Steels, pp. 96-99, The Iron and Steel Institute of Japan, Fukuoka, Japan [E2]
2001 Centre for Material and Fibre Innovation
Hickson, M.R.*, Hurley, P.J.*, Gibbs, R.K.*, Kelly, Georgina and Hodgson, Peter (2001) The production of ultrafine ferrite in low-carbon steel by strain-Induced transformation, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 33, no. 4, pp. 1019-1026, Minerals, Metals & Materials Society, Warrendale, PA [C1.1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036540804
Citation counts:2000 School of Engineering
Barnett, M., Kelly, G. and Hodgson, P. (2000) PREDICTING THE CRITICAL STRAIN FOR DYNAMIC RECRYSTALLIZATION USING THE KINETICS OF STATIC RECRYSTALLIZATION, Scripta Materialia, vol. 0, no. 0, pp. 365-369, Elsevier Science, Oxford [C1]
ERA journal ID: 4837 – Scopus EID: Not taggedHodgson, P., Kelly, G. and Barnett, M. (2000) Recent Trends in the Thermomechanical Processing of Steel, Materials Forum: Materials and Processes of the 21st Century, vol. 0, no. 0, pp. 37-48, Institute of Materials Engineering Australasia Ltd, North Melbourne, Victoria, Australia [C1]
ERA journal ID: Not matching ERA journal listHurley, P.*, Kelly, G. and Hodgson, P. (2000) Ultrafine ferrite formation during hot strip rolling, Materials Science and Technology, vol. 0, no. 0, pp. 1273-1276, Institute of Materials, United Kingdom [C1]
ERA journal ID: Not matching ERA journal listBarnett, M., Kelly, G. and Hodgson, P. (2000) Predictions of Dynamic Recrystallization in Aluminium Based on Static Recrystallization Data, in J. Kazadi and J. Masounave (eds), 39th Annual Conference of Metallurgists of CIMProceedings of the International Symposium on Light Metals, pp. 439-452, Canadian Institute of Mining, Metallurgy and Petro, Canada [E2]
Kelly, G. and Hodgson, P. (2000) ULTRAFINE FERRITE PRODUCTION BY STRAIN-INDUCED TRANSFORMATION, in M.A. Baker (ed.), 42nd Mechanical Working and Steel Processing Conference, pp. 515-522, Iron & Steel Society, USA [E2]
Kelly, G. and Hodgson, P. (2000) The production of fine-grained austenite and ferrite in steels through thermomechanical processing, in S. Yue and E. Es-sadiqi (eds), J.J. Jonas Symposium on Thermonuclear Processing of Steel, pp. 335-349, Canadian Institute of Mining, Metallurgy & Petroleum, Canada [E2]
1999 School of Engineering
Crawford, B., Corbett, T., Scott, M. and Kelly, G. (1999) The Fatigue Behaviour of an Ultra-Fine Ferrite Steel, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 "Materials Processing" Proceedings, pp. 127-132, IMEA, Melbourne [E1]
Kelly, G. and Hodgson, P. (1999) Comparison of Static and Metadynamic Recrystallisation in Plain Carbon Steet, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 "Materials Processing" Proceedings, pp. 115-120, IMEA, Melbourne [E1]
Hickson, M., Hurley, P.*, Kelly, G., Hodgson, P. and Barnett, M. (1999) Formation of Ultra-Fine Grained Steels, Proceedings of the Second Symposium on Super Metal, pp. 203-213, JRCM, Tokyo, Japan [L2]
Grants and Consultancies
All years
Research Income - National Competitive Grants
Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication, ARC Collaborative - Linkage - Projects (Round 2, APAI, APDI), ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry [T]
- 2010: $63,321
- 2009: $148,643
- 2008: $150,898
- 2007: $63,766
Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]
- 2009: $13,334
- 2008: $110,360
- 2007: $104,915
- 2006: $94,417
Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]
- 2006: $12,557
- 2005: $24,650
- 2004: $24,130
- 2003: $11,789
- 2004: $6,000
- 2003: $6,000
Research Income - Industry and Other Funding - Australian
Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication [V.1]
- 2010: $15,000
- 2009: $15,000
- 2008: $15,000
Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]
- 2009: $14,500
- 2006: $14,500
Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]
- 2008: $26,137
Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]
- 2005: $6,000
Higher Degree by Research Completions supervised by Georgina Kelly
2005
Bo Zhu
Doctor of Philosophy, Thesis entitled: Tribology of Lubricated Nitrocarburised and Titanium Carbonitride Surfaces.
School of Engineering2001
Leon Burgess-Dean
Doctor of Philosophy, Thesis entitled: Predicting the Resistance of Fired Clay Products to Salt Attack.
School of Engineering
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Thursday 23rd May 2013 10:04pm
