Research Services Division

Deakin Research

Research Output for Georgina Kelly

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2013 Institute for Frontier Materials

Awaja, Firas*, Gilbert, Michael, Naebe, Minoo, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2013) Ageing of surface treated thermoplastic polyolefins, Polymer degradation and stability, vol. 98, no. 9, pp. 1699-1704, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1691 – Scopus EID: 2-s2.0-84881166199
DRO entry for this publication

2012 Institute for Frontier Materials

Okonkwo, Paul C., Kelly, Georgina, Rolfe, Bernard F. and Pereira, Michael P. (2012) The effect of temperature on sliding wear of steel-tool steel pairs, Wear, vol. 282-283, pp. 22-30, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84858702686
Citation counts: Scopus - 1
DRO entry for this publication

2011 Institute for Frontier Materials

Gilbert, Michael J.*, Awaja, Firas, Kelly, Georgina L., Fox, Bronwyn L., Brynolf, Russell* and Pigram, Paul J.* (2011) Tailoring the surface chemistry of carbon fiber and E-glass composites for improved adhesion, Surface and interface analysis, vol. 43, no. 5, pp. 856-864, John Wiley & Sons Ltd, Oxford, England [C1]
ERA journal ID: 1506 – Scopus EID: 2-s2.0-79953716257
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Okonkwo, Paul C., Pereira, Michael P., Kelly, Georgina and Rolfe, Bernard F. (2011) Effects of temperature in relation to sheet metal stamping, in Mastorakis, Nikos; Mladenov, Valeri; Lepadatescu, Badea; Karimi, Hamid Reza and Helmis, Costas G. (eds), MEQAPS 2011 : Proceedings of the 4th International Conference on Manufacturing Engineering, Quality and Production Systems, pp. 114-118, World Scientific and Engineering Academy and Society (WSEAS), Barcelona, Spain [E1]
DRO entry for this publication

2010 Institute for Frontier Materials

Awaja, Firas, Gilbert, Michael*, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2010) Exploring molecular changes at the surface of polypropylene after accelerated thermomolecular adhesion treatments, ACS applied materials & interfaces, vol. 2, no. 5, pp. 1505-1513, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 40638 – Scopus EID: 2-s2.0-77954969606
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

2009 Institute for Frontier Materials

Awaja, Firas, van Riessen, Grant*, Fox, Bronwyn, Kelly, Georgina and Pigram, Paul J.* (2009) Time-of-flight secondary ion mass spectrometry investigation of epoxy resin curing behavior in real time, Journal of applied polymer science, vol. 113, no. 5, pp. 2765-2776, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-67649997262
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Awaja, Firas, Gilbert, Michael*, Fox, Bronwyn, Kelly, Georgina and Pigram, Paul J.* (2009) Investigation of the postcure reaction and surface energy of epoxy resins using time-of-flight secondary ion mass spectrometry and contact-angle measurements, Journal of applied polymer science, vol. 113, no. 5, pp. 2755-2764, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-67650000481
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Awaja, Firas, Gilbert, Michael*, Kelly, Georgina, Fox, Bronwyn and Pigram, Paul J.* (2009) Adhesion of polymers, Progress in polymer science, vol. 34, no. 9, pp. 948-968, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1701 – Scopus EID: 2-s2.0-69249206821
Citation counts: Scopus - 92, Thomson - 76
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Awaja, Firas, van Riessen, Grant*, Kelly, Georgina, Fox, Bronwyn and Pigram, Paul J* (2008) ToF-SIMS investigation of epoxy resin curing reaction at different resin to hardener ratios, Journal of applied polymer science, vol. 110, no. 5, pp. 2711-2717, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-56749103927
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Awaja, Firas, Gilbert, M.*, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2008) Surface properties of polypropylene following a novel industrial surface-treatment process, Surface and interface analysis, vol. 40, no. 11, pp. 1454-1462, John Wiley & Sons, Oxford, England [C1]
ERA journal ID: 1506 – Scopus EID: 2-s2.0-55649111887
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) Ultrafine grained structure formation in steels using dynamic strain induced transformation processing, International materials reviews, vol. 52, no. 1, pp. 14-28, Maney Publishing, London, England [C1]
ERA journal ID: 4910 – Scopus EID: 2-s2.0-33847062908
Citation counts: Scopus - 39, Thomson - 30
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) The effect of multiple deformations on the formation of ultrafine grained steels, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 38, no. 3, pp. 450-463, Minerals, Metals & Materials Society, Warrendale, PA. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-34250765772
Citation counts: Scopus - 29, Thomson - 22
DRO entry for this publication

2006 School of Engineering and Information Technology

Herring, Mandy, Kelly, Georgina, Mardel, J.*, Hodgkin, J.* and Fox, Bronwyn (2006) Surface analysis of carbon fibre composite laminates for automotive body panels, in Bandyopadhyay, Sri; Zeng, Qinghua; Berndt, Christopher; Rizkalla, Sami; Gowripalan, N.; Matisons, Janis and Samudrala, Saritha (eds), Developments in composites : advanced, infrastructural, natural & nano-composites, pp. 590-595, University of New South Wales, Sydney, N.S.W. [E1]
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Rolfe, Bernard, Frayman, Yakov, Kelly, Georgina and Nahavandi, Saeid (2006) Recognition of lubrication defects in cold forging process with a neural network, in Kamruzzaman, Joarder; Begg, Rezaul and Sarker, Ruhul (eds), Artificial neural networks in finance and manufacturing, pp. 262-275, Idea Group Publishing, Hershey, PA [B1]
DRO entry for this publication

2005 School of Engineering

Fabijanic, Dan, Kelly, Georgina, Long, John and Hodgson, Peter (2005) A nitrocarburising and low-temperature chromising duplex surface treatment, Materials forum, vol. 29, pp. 77-82, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hodgson, Peter, Beladi, Hossein and Kelly, Georgina (2005) Development of ultrafine grained steels through thermomechanical processing, Canadian metallurgical quarterly, vol. 44, no. 2, pp. 179-185, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada [C1]
ERA journal ID: 4714 – Scopus EID: 2-s2.0-29844432174
Citation counts: Scopus - 4
DRO entry for this publication

Nanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming, Materials forum, vol. 29, pp. 114-118, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Herring, M.L., Kelly, G.L., Mardel, J.I.*, Forrest, M.A., Law, H.* and Fox, B.L. (2005) Composites for automotive body panels, Materials Australia, vol. 38, no. 2, pp. 12-13, Great Southern Press, Melbourne, Vic. [C3.1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) A qualitative and quantitative investigation of the surface tribology in forming galvanneal steel, in Xie, M.; Mouritz, A.; Khatibi, A. A.; Gardiner, C. and Chiu, W. K. (eds), Advances in applied mechanics : proceedings of the fourth Australasian Congress on Applied Mechanics Applied Mechanics, pp. 357-362, Institute of Materials Engineering Australasia, North Melbourne, Vic [E1]
DRO entry for this publication

Herring, Mandy L, Kelly, Georgina L, Mardel, James I* and Fox, Bronwyn L (2005) Surface analysis of environmentally exposed painted composites manufactured from Quickstep and autoclave processes, in Unknown (ed.), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference 2005, pp. 220-225, SAMPE Europe Business Office, Paris, France [E1.1]
DRO entry for this publication

2004 School of Engineering

Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 367, pp. 152-161, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0942269403
Citation counts: Scopus - 53, Thomson - 49
DRO entry for this publication

Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained microstructures in steel through strain induced transformation during single pass hot rolling, Materials science and technology, vol. 20, no. 2, pp. 213-220, The Institute, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 14
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing, Materials transactions, vol. 45, no. 7, pp. 2214-2218, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-4544244971
Citation counts: Scopus - 10, Thomson - 5
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) The evolution of ultrafine ferrite formation through dynamic strain-induced transformation, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 371, no. 1, pp. 343-352, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-16544369376
Citation counts: Scopus - 58, Thomson - 48
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling, Materials science and technology, vol. 20, no. 12, pp. 1538-1544, Maney Publishing, Leeds, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10
DRO entry for this publication

Nanayakkara, N., Kelly, Georgina and Hodgson, Peter (2004) Determination of the coefficient of friction in partially penetrated draw beads, Steel grips, vol. 2, no. Supplement, pp. 677-680, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

Zhu, B., Mardel, J.* and Kelly, Georgina (2004) An investigation of tribological properties of CN and TiCN coatings, Journal of materials engineering and performance, vol. 13, no. 4, pp. 481-487, Springer, Berlin, Gemany [C1]
ERA journal ID: 4794 – Scopus EID: 2-s2.0-4344577292
DRO entry for this publication

Zhu, B. and Kelly, Georgina (2004) Frictional behaviour and wear performance of a nitrocarburised coating sliding against AISI 1019 steel, Materials forum, vol. 27, pp. 54-61, Institute of Materials Engineering Australasia Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2004) Development of a duplex surface treatment using fluidised bed technololgy, Materials Australia, vol. 37, no. 1, pp. 12-15, Institute of Metals and Materials Australasia Ltd, Parkville, Vic. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nanayakkara, M., Kelly, G. and Hodgson, P. (2004) Effect of contact pressure and lubrication on the coating characteristics, surface tribology and friction in forming zince coated sheet steel, in Haque, E.; Haseeb, A.; Rashid, A.; Islam, M. and Moniruzzaman, M. (eds), SPPM 2004 : Proceedings of the 2nd International Conference on Structure, Processing and Properties of Materials, pp. 313-320, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh [E2]
DRO entry for this publication

2003 School of Engineering

Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2003) Formation of ultra-fine ferrite by deformation of austenite during single pass rolling, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 252-257, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Hodgson, Peter, Barnett, Matthew, Beladi, Hossein and Kelly, Georgina (2003) The production of ultrafine grained steels by thermomechanical processing, in Palmiere, E. J.; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 170-175, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

2002 School of Information Technology

Rolfe, Bernard, Frayman, Yakov, Hodgson, Peter, Webb, G.I. and Kelly, Georgina (2002) Fault detection in a cold forging process through feature extraction with a neural network, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED Conference, pp. 155-159, ACTA Press, New York, N.Y [E1]
DRO entry for this publication

2002 School of Engineering

Barnett, Matthew, Kelly, Georgina and Hodgson, Peter (2002) Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 33A, no. 7, pp. 1893-1900, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036650051
Citation counts: Scopus - 14
DRO entry for this publication

Kelly, Georgina, Beladi, Hossein and Hodgson, Peter (2002) Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel, ISIJ international, vol. 42, no. 12, pp. 1585-1590, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-0036994014
Citation counts: Scopus - 20, Thomson - 16
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina, Cardew-Hall, Michael* and Hodgson, Peter (2002) Galling reduction through die surface treatment - testing three treatments for sheet metal stamping, Stamping journal, vol. 14, no. 2, pp. 30-31, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kelly, Georgina and Hodgson, Peter (2002) Grain refinement through thermomechanical processing, in Bott, Ivani (eds), Aços : perspectivas para os próximos 10 anos, pp. 89-94, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil [E2]
DRO entry for this publication

2001 School of Engineering

Burgess-Dean, L., Kelly, Georgina and Crawford, B. (2001) A mechanical test for the durability of fired clay products using compressive strength and indentation hardness tests, in Griffith, Michael (eds), Proceedings of the 6th Australasian Masonry Conference, Adelaide, South Australia, 12-13 July 2001, pp. 83-94, Adelaide University, Adelaide, S.Aust. [E1]
DRO entry for this publication

Burgess-Dean, L., Crawford, B. and Kelly, Georgina (2001) The resistance to salt attack compared with the material properties of fired clay products, in Griffith, Michael (eds), Proceedings of the 6th Australasian Masonry Conference, pp. 73-82, Adelaide University, Adelaide, S. Aust. [E1]
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2001) Combating adhesive wear in automotive stamping, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 237-242, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Hodgson, Peter, Hurley, P.* and Kelly, Georgina (2001) The formation of ultrafine ferrite in low C steels through thermomechanical processing, in Takaki, S. and Maki, T. (eds), Proceedings of the International Symposium on Ultrafine Grained Steels (ISUGS 2001), pp. 10-17 [E1]
DRO entry for this publication

Kelly, Georgina and Hodgson, Peter (2001) Post-deformation softening and strain-induced transformation, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 63-68, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Whale, J., Kelly, Georgina and Hodgson, Peter (2001) Dynamic transformation of ferrite to austenite to ferrite through deformation heating, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 81-86, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Kelly, G. and Hodgson, P. (2001) Dynamic transformation of ferrite to austenite to ferrite through large strain deformation, in Takaki, Setsuo (eds), ISUGS 2001 : Proceedings of the International Symposium on Ultrafine Grained Steels, pp. 96-99, The Iron and Steel Institute of Japan, Fukuoka, Japan [E2]
DRO entry for this publication

2001 Centre for Material and Fibre Innovation

Hickson, M.R.*, Hurley, P.J.*, Gibbs, R.K.*, Kelly, Georgina and Hodgson, Peter (2001) The production of ultrafine ferrite in low-carbon steel by strain-Induced transformation, Metallurgical and materials transactions A : physical metallurgy and materials science, vol. 33, no. 4, pp. 1019-1026, Minerals, Metals & Materials Society, Warrendale, PA [C1.1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036540804
Citation counts: Scopus - 53, Thomson - 37
DRO entry for this publication

2000 School of Engineering

Barnett, M., Kelly, G. and Hodgson, P. (2000) PREDICTING THE CRITICAL STRAIN FOR DYNAMIC RECRYSTALLIZATION USING THE KINETICS OF STATIC RECRYSTALLIZATION, Scripta Materialia, vol. 0, no. 0, pp. 365-369, Elsevier Science, Oxford [C1]
ERA journal ID: 4837 – Scopus EID: Not tagged
no DRO entry yet for this publication

Hodgson, P., Kelly, G. and Barnett, M. (2000) Recent Trends in the Thermomechanical Processing of Steel, Materials Forum: Materials and Processes of the 21st Century, vol. 0, no. 0, pp. 37-48, Institute of Materials Engineering Australasia Ltd, North Melbourne, Victoria, Australia [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hurley, P.*, Kelly, G. and Hodgson, P. (2000) Ultrafine ferrite formation during hot strip rolling, Materials Science and Technology, vol. 0, no. 0, pp. 1273-1276, Institute of Materials, United Kingdom [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Barnett, M., Kelly, G. and Hodgson, P. (2000) Predictions of Dynamic Recrystallization in Aluminium Based on Static Recrystallization Data, in J. Kazadi and J. Masounave (eds), 39th Annual Conference of Metallurgists of CIMProceedings of the International Symposium on Light Metals, pp. 439-452, Canadian Institute of Mining, Metallurgy and Petro, Canada [E2]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (2000) The production of fine-grained austenite and ferrite in steels through thermomechanical processing, in S. Yue and E. Es-sadiqi (eds), J.J. Jonas Symposium on Thermonuclear Processing of Steel, pp. 335-349, Canadian Institute of Mining, Metallurgy & Petroleum, Canada [E2]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (2000) ULTRAFINE FERRITE PRODUCTION BY STRAIN-INDUCED TRANSFORMATION, in M.A. Baker (ed.), 42nd Mechanical Working and Steel Processing Conference, pp. 515-522, Iron & Steel Society, USA [E2]
no DRO entry yet for this publication

1999 School of Engineering

Crawford, B., Corbett, T., Scott, M. and Kelly, G. (1999) The Fatigue Behaviour of an Ultra-Fine Ferrite Steel, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 "Materials Processing" Proceedings, pp. 127-132, IMEA, Melbourne [E1]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (1999) Comparison of Static and Metadynamic Recrystallisation in Plain Carbon Steet, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 "Materials Processing" Proceedings, pp. 115-120, IMEA, Melbourne [E1]
no DRO entry yet for this publication

Hickson, M., Hurley, P.*, Kelly, G., Hodgson, P. and Barnett, M. (1999) Formation of Ultra-Fine Grained Steels, Proceedings of the Second Symposium on Super Metal, pp. 203-213, JRCM, Tokyo, Japan [L2]
no DRO entry yet for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry [T]

  • 2012: $13,611
  • 2010: $63,321
  • 2009: $148,643
  • 2008: $150,898
  • 2007: $63,766

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $13,334
  • 2008: $110,360
  • 2007: $104,915
  • 2006: $94,417

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2006: $12,557
  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789
  • 2004: $6,000
  • 2003: $6,000

Research Income - Industry and Other Funding - Australian

Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication [V.1]

  • 2010: $15,000
  • 2009: $15,000
  • 2008: $15,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2009: $14,500
  • 2006: $14,500

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2008: $26,137

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Higher Degree by Research Completions supervised by Georgina Kelly

2005

Bo Zhu
Doctor of Philosophy, Thesis entitled: Tribology of Lubricated Nitrocarburised and Titanium Carbonitride Surfaces.
School of Engineering Requires an Internet connection

2001

Leon Burgess-Dean
Doctor of Philosophy, Thesis entitled: Predicting the Resistance of Fired Clay Products to Salt Attack.
School of Engineering Requires an Internet connection

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 20th August 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011