Research Services Division

Deakin Research

Research Output for S Khoddam

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

S Khoddam may be from another institution or only recently joined Deakin University.

Publications

2014 External

Kazum, O.*, Bobby, Kannan M.*, Beladi, H., Timokhina, I.B., Hodgson, P.D. and Khoddam, S.* (2014) Aqueous corrosion performance of nanostructured bainitic steel, Materials and design, vol. 54, pp. 67-71, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

2013 External

Farhoumand, A.*, Hodgson, P.D., Khoddam, S.* and Fang, X.Y.* (2013) Multiple pass axi-symmetrical forward spiral extrusion of interstitial-free (IF) steel, Materials science and engineering A, vol. 579, pp. 217-225, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84878686349
Citation counts: Scopus - 1
DRO entry for this publication

Farhoumand, A.*, Hodgson, P.D. and Khoddam, S.* (2013) Finite element analysis of plastic deformation in variable lead axisymmetric forward spiral extrusion, Journal of materials science, vol. 48, no. 6, pp. 2454-2461, Springer, Berlin, Germany [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-84879550950
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

2012 External

Farhoumand, A.*, Khoddam, S.* and Hodgson, P.D. (2012) A study of plastic deformation during axisymmetric forward spiral extrusion and its subsequent mechanical property changes, Modelling and simulation in materials science and engineering, vol. 20, no. 8, Institute of Physics Publishing, Bristol, England [C2]
ERA journal ID: 4986 – Scopus EID: Not tagged
DRO entry for this publication

2011 External

Farhoumand, Alireza*, Hodgson, Peter D. and Khoddam, Shahin* (2011) Finite element analysis of an axi-symmetric forward spiral extrusion of Mg-1.75Mn alloy, Materials science forum, vol. 690, pp. 173-176, Trans Tech Publications, Lausanne, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Khoddam, S.*, Farhoumand, A.* and Hodgson, P. D. (2011) Axi-symmetric forward spiral extrusion, a kinematic and experimental study, Materials science and engineering A, vol. 528, no. 3, pp. 1023-1029, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-78650170253
Citation counts: Scopus - 13, Thomson - 11
DRO entry for this publication

Khoddam, S.*, Hodgson, P. D. and Bahramabadi, M. Jafari* (2011) An inverse thermal-mechanical analysis of the hot torsion test for calibrating the constitutive parameters, Materials and design, vol. 32, no. 4, pp. 1903-1909, Elsevier Ltd, Oxford, U. K. [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-79251638630
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Khoddam, S.*, Farhoumand, A.* and Hodgson, P.D. (2011) Upper-bound analysis of axi-symmetric forward spiral extrusion, Mechanics of materials, vol. 43, no. 11, pp. 684-692, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4980 – Scopus EID: 2-s2.0-80054031282
Citation counts: Scopus - 6, Thomson - 5
DRO entry for this publication

2010 External

Khoddam, S.* and Hodgson, P. D. (2010) Post processing of the hot torsion test results using a multi-dimensional modelling approach, Materials and design, vol. 31, no. 5, pp. 2578-2584, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-76549120444
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Khoddam, S.* and Hodgson, P. D. (2010) A heuristic model selection scheme for representing hot flow data using the hot torsion test results, Materials and design, vol. 31, no. 4, pp. 2011-2017, Elsevier, Oxford, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-72749099950
Citation counts: Scopus - 10, Thomson - 10
DRO entry for this publication

2004 External

Khoddam, S.* and Hodgson, Peter (2004) Conversion of the hot torsion test results into flow curve with multiple regimes of hardening, Journal of materials processing technology, vol. 153-154, pp. 839-845, Elsevier BV, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-9444236764
Citation counts: Scopus - 14, Thomson - 13
DRO entry for this publication

2003 External

Khoddam, S.* and Hodgson, Peter (2003) A new method to determine the strain and strain rate hardening characteristics from the hot torsion test, Materials science forum, vol. 426, no. 432, pp. 1373-1378, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by S Khoddam

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Tuesday 2nd September 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011