Research Services Division

Deakin Research

Research Output for Rimma Lapovok

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Rimma Lapovok may be from another institution or only recently joined Deakin University.

Publications

2013 External

Orlov, Dmitry*, Lapovok, Rimma*, Toth, Laszlo S*, Timokhina, Ilana B, Hodgson, Peter D, Haldar, Arunansu* and Bhattacharjee, Debashish* (2013) Asymmetric rolling of interstitial-free steel using differential roll diameters. Part II : microstructure and annealing effects, Metallurgical and materials transactions A, vol. 45, no. 1, pp. 447-454, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84882544715
DRO entry for this publication

Orlov, Dmitry*, Pougis, Arnaud*, Lapovok, Rimma*, Toth, Laszlo S.*, Timokhina, Ilana B., Hodgson, Peter D., Haldar, Arunansu* and Bhattacharjee, Debashish* (2013) Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I : mechanical properties and deformation textures, Metallurgical and materials transactions A, vol. 44, no. 9, pp. 4346-4359, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84881086738
Citation counts: Scopus - 4
DRO entry for this publication

2012 External

Lapovok, R.*, Orlov, D.*, Timokhina, I. B., Pougis, A.*, Toth, L. S.*, Hodgson, P. D., Haldar, A.* and Bhattacharjee, D.* (2012) Asymmetric rolling of interstitial-free steel using one idle roll, Metallurgical and materials transactions A, vol. 43, no. 4, pp. 1328-1340, Springer New York LLC, New York, N. Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-84859267324
Citation counts: Scopus - 4
DRO entry for this publication

Orlov, Dmitry*, Lapovok, Rimma*, Toth, Laszlo S.*, Timokhina, Ilana B., Hodgson, Peter D., Bhattacharjee, Debashish* and Haldar, Arunansu* (2012) Development of asymmetric rolling for the better control over structure and mechanical properties in IF steel, Materials science forum, vol. 706-709, pp. 2788-2793, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

2010 External

Orlov, Dmitry*, Lapovok, Rimma*, Tóth, Laszlo S.*, Timokhina, Ilana B., Hodgson, Peter D., Bhattacharjee, Debashish* and Haldar, Arunansu* (2010) Structure and mechanical properties of asymmetrically rolled IF steel sheet, Materials science forum, vol. 654-656, pp. 1255-1258, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 5
DRO entry for this publication

2009 External

Lapovok, Rimma*, Tomus, Dacian*, Barnett, Matthew Robert and Gibson, Mark A.* (2009) Use of residual hydrogen to produce CP-Ti powder compacts for low temperature rolling, International journal of materials research, vol. 100, no. 12, pp. 1727-1738, Carl Hanser Verlag GmbH, Munich, Germany [C1]
ERA journal ID: 123994 – Scopus EID: 2-s2.0-77952651122
Citation counts: Scopus - 3
DRO entry for this publication

Lapovok, Rimma*, Tomus, D.*, Skripnyuk, V.M.*, Barnett, Matthew and Gibson, M.A.* (2009) The effect of hydrogenation on the ECAP compaction of Ti–6Al–4V powder and the mechanical properties of compacts, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 513-514, pp. 97-108, Elsevier, Basel, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-65349111267
Citation counts: Scopus - 16, Thomson - 16
DRO entry for this publication

Ma, X., Lapovok, R.*, Gu, C.*, Molotnikov, A.*, Estrin, Y.*, Pereloma, E.V.*, Davies, C.H.J.* and Hodgson, P. D. (2009) Deep drawing behaviour of ultrafine grained copper : modelling and experiment, Journal of materials science, vol. 44, no. 14, pp. 3807-3812, Springer, New York, N.Y. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-67649387998
Citation counts: Scopus - 16, Thomson - 14
DRO entry for this publication

2007 External

Lapovok, Rimma* and Hodgson, Peter (2007) Determination of lower-bound ductility for AZ31 magnesium alloy by use of the bulge specimens, Journal of engineering materials and technology, vol. 129, no. 3, pp. 407-413, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 3776 – Scopus EID: 2-s2.0-34547767522
Citation counts: Scopus - 2, Thomson - 3
DRO entry for this publication

2004 External

Lapovok, R.*, Barnett, Matthew and Davies, C. H. J.* (2004) Construction of extrusion limit diagram for AZ31 magnesium alloy by FE simulation, Journal of materials processing technology, vol. 146, no. 3, pp. 408-414, Elsevier SA, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-1242320977
Citation counts: Scopus - 58, Thomson - 42
DRO entry for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2011: $26,140
  • 2010: $26,140
  • 2009: $26,140

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2007: $50,000
  • 2006: $50,000
  • 2005: $50,000

Research Income - Industry and Other Funding - International A (Competitive, Peer-Reviewed Research Grant Income)

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling [V.2]

  • 2012: $6,000
  • 2011: $6,000
  • 2009: $6,000

Higher Degree by Research Completions supervised by Rimma Lapovok

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Thursday 28th August 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011