Research Services Division

Deakin Research

Research Output for John M Long

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2013 School of Engineering

Long, John, Chenery, Kenneth L., Stannard, Warren B. and Fitzgerald, Kristine J. (2013) Use of web-conferencing software to enhance practical learning for distance students in a first-year Engineering course, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-10, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Long, John (2013) Recent advances in distance education for physics students, in Unknown (ed.), ACSME 2013 : Proceedings of the Australian Conference on Science & Mathematics Education, p. 47, UniServe Science, The University of Sydney, Sydney, N.S.W. [E3]
DRO entry for this publication

2012 School of Engineering

Long, John Matthew, Horan, Ben P. and Hall, Robynne (2012) Undergraduate electronics students' use of home experiment kits for distance education, in Unknown (ed.), ASEE 2012 : Proceedings of the 119th American Society for Engineering Education Annual Conference & Exposition, pp. 1-12, American Society for Engineering Education, Washington, D.C. [E1]
DRO entry for this publication

Long, John M., Stannard, Warren B., Chenery, Ken and Joordens, Matthews A. (2012) Physics practicals for distance education in an undergraduate engineering course, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, pp. 691-701, ESER group, Swinburne University of Technology, Melbourne, Vic. [E1]
DRO entry for this publication

2009 School of Engineering

Gao, Weimin, Kong, Lingxue, Long, John M. and Hodgson, Peter D. (2009) Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces, Journal of materials processing technology, vol. 209, no. 1, pp. 497-505, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-53949095824
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

2008 School of Engineering and Information Technology

Long, J. M., De Vries, L. L., Hall, R. M. and Kouzani, A. Z. (2008) A new H.E.L.P kit for teaching practical AC electronics to undergraduate distance students, in Mann, Llewellyn; Thompson, Adam and Howard, Prue (eds), AAEE 2008 : To industry and beyond : Proceedings of the 19th Conference for the Australasian Association for Engineering Education 2008, pp. 1-6, AARE, Yeppoon, Queensland [E1]
DRO entry for this publication

Nouri, A., Chen, X., Hodgson, P. D., Long, J. M., Yamada, Y.* and Wen, C. (2008) Preparation of bioactive porous Ti-Sn-Nb alloy for biomedical applications, in Lefebvre, Louis Philippe; Banhart, John and Dunand, David C. (eds), MetFoam 2007 : International Conference on Porous Metals and Metallic Foams, pp. 307-310, DEStech Publications, Lancaster, Pa. [E1]
DRO entry for this publication

2006 School of Engineering and Information Technology

Ighaniyan, S., Hall, W., Long, John and Hodgson, Peter (2006) The implementation of the Taguchi method to improve foundry scraps in hot box core production process at Ford casting plant, in Li, Yanxiang; Shen, Houfa; Xu, Quingyan and Han, Zhiqiang (eds), Science and processing of cast iron VIII: proceedings of the 8th International Symposium on Science and Processing of Cast Iron, pp. 446-451, Tsinghua University Press, Beijing, China [E1]
DRO entry for this publication

Ighaniyan, S., Hall, W., Long, John and Hodgson, Peter (2006) A study on veining, burn on sand and distortion of water jacket cores at the Ford casting plant, in Li Yanxiang; Shen Houfa; Xu Quingyan and Han Zhiqiang (eds), Science and processing of cast iron VIII: proceedings of the 8th International Symposium on Science and Processing of Cast Iron, pp. 288-293, Tsinghua University Press, Beijing, China [E1]
DRO entry for this publication

2005 School of Engineering

Fabijanic, Dan, Kelly, Georgina, Long, John and Hodgson, Peter (2005) A nitrocarburising and low-temperature chromising duplex surface treatment, Materials forum, vol. 29, pp. 77-82, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2005) Ferritic nitrocarburising of tool steels, Surface engineering, vol. 21, no. 2, pp. 86-98, Maney Publishing, London, England [C1]
ERA journal ID: 4845 – Scopus EID: 2-s2.0-27144557283
Citation counts: Scopus - 7, Thomson - 6
DRO entry for this publication

King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2005) Pin on disc wear investigation of nitrocarburised H13 tool steel, Surface engineering, vol. 21, no. 2, pp. 99-106, Maney Publishing, London, England [C1]
ERA journal ID: 4845 – Scopus EID: 2-s2.0-27144526182
Citation counts: Scopus - 5, Thomson - 3
DRO entry for this publication

King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2005) Ammonia dissociation in the fluidised bed furnace, Materials forum, vol. 29, pp. 98-102, Institute of Materials Engineering Australasia Pty Ltd, Australia [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nanayakkara, N.K.B.M.P., Long, John and Hodgson, Peter (2005) Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing, Materials forum, vol. 29, pp. 340-344, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Long, John and Hartas, K. J. (2005) An AC signal-generator and PC-oscilloscope test package for distance students in undergraduate electronics, in Radcliffe, David and Humphries, Josh (eds), Proceedings of the 4th ASEE/AaeE Global Colloquium on Engineering Education, School of Engineering, The University of Queensland, Brisbane, QLD [E1]
DRO entry for this publication

Long, J., Paterson, P.* and Hughes, A.* (2005) A calibration for surface analysis on aluminium alloys by RF-Glow-Discharge Optical Emission Spectrometry, in Colla, M. (eds), AIP 2005 : Physics for the Nation : The Proceedings of the 16th National Congress of the Australian Institute of Physics, p. 179, Australian Institute of Physics, Parkville, Vic. [E2]
DRO entry for this publication

2004 School of Engineering

Gao, Weimin, Long, John, Kong, Lingxue* and Hodgson, Peter (2004) Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed, ISIJ international, vol. 44, no. 5, pp. 869-877, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-3142747729
Citation counts: Scopus - 11
DRO entry for this publication

Harris, S. G.*, Doyle, E. D.*, Wong, Y.-C.*, Munroe, P. R.*, Cairney, J. M.* and Long, John (2004) Reducing the macroparticle content of cathodic arc evaporated TiN coatings, Surface and coatings technology, vol. 183, no. 2-3, pp. 283-294, Elsevier Science BV, Amsterdam, Netherlands [C1]
ERA journal ID: 5020 – Scopus EID: 2-s2.0-2442509813
Citation counts: Scopus - 34, Thomson - 31
DRO entry for this publication

King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2004) Cr(N,C) diffusion coating formation on pre-nitrocarburised H13 tool steel, Surface and coatings technology, vol. 179, no. 1, pp. 18-26, Elsevier Science SA, Amsterdam, Netherlands [C1]
ERA journal ID: 5020 – Scopus EID: 2-s2.0-1342268770
Citation counts: Scopus - 23, Thomson - 20
DRO entry for this publication

King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2004) Fluidized bed CrN coating formation on prenitrocarburized plain carbon steel, Journal of materials engineering and performance, vol. 13, no. 4, pp. 431-438, Springer, New York, N.Y. [C1]
ERA journal ID: 4794 – Scopus EID: 2-s2.0-4344584478
Citation counts: Scopus - 7, Thomson - 6
DRO entry for this publication

Long, John, Haynes, D.A. and Hodgson, Peter (2004) Characterisation of galvanneal coatings on strip steel, Materials forum, vol. 27, pp. 62-67, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Long, John M. and Baskaran, Kanagaratnam (2004) Engineering education down under : distance teaching at Deakin University, Australia, in Abata, Duane (eds), Proceedings of the 2004 American Society for Engineering Education Annual Coriference & Exposition, pp. 1-12, American Society for Engineering Education, Washington, D.C. [E1]
DRO entry for this publication

Long, John M., Florance, J. R. and Joordens, Matthew (2004) The use of home experimentation kits for distance students in first-year undergraduate electronics, in Abata, Duane (eds), Proceedings of the 2004 American Society for Engineering Education Annual Conference & Exposition, American Society for Engineering Education, Washington, D.C. [E1]
DRO entry for this publication

Long, John, Paterson, P. J. K.* and Hughes, A. E.* (2004) Calibration of rf-gd-oes for surface analysis on aerospace aluminum alloys, Surface Analysis '04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p. 43, John Wiley & Sons, Richland, Wash. [L2]
DRO entry for this publication

Long, John (2004) Glow-discharge optical emission spectrometry : a powerful tool for surface analysis, Surface Analysis '04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p. 57, John Wiley & Sons, Richland, Wash. [L2]
DRO entry for this publication

Long, John, Gao, Weimin and Hodgson, Peter (2004) Depth-profiling of carbon in carburised steel by glow-discharge optical emission spectrometry, Surface Analysis '04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p. 84, John Wiley & Sons, Richland, Wash. [L2]
DRO entry for this publication

Long, John and Batchelor, W.* (2004) Cyclic loading measurements of the strength and stiffness of single wood pulp fibres, in Gregersen, Oyvind W. (eds), Progress in Paper Physics Seminar 2004, NTNU, Trondheim, Norway [L2]
DRO entry for this publication

2003 School of Engineering

Harris, S. G.*, Doyle, E. D.*, Vlasveld, A. C.*, Audy, J.*, Long, John and Quick, D.* (2003) Influence of chromium content on the dry machining performance of cathodic arc evaporated TiA1N coatings, Wear, vol. 254, pp. 185-194, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-0037259734
Citation counts: Scopus - 42, Thomson - 36
DRO entry for this publication

Toh, S. K.*, McCulloch, D. G.*, du Plessis, J.*, Paterson, P. J. K.*, Hughes, A. E.*, Jamieson, D.*, Rout, B.*, Long, J. M. and Stonham, A.* (2003) An investigation of the native oxide of aluminum alloy 7475-T7651 using XPS, AES, TEM, EELS, GDOES, RBS., Surface review and letters, vol. 10, no. 2-3, pp. 365-371, World Scientific Publishing Co., Singapore [C1]
ERA journal ID: 1152 – Scopus EID: 2-s2.0-0042346251
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Carburising and carbon transfer coefficient in a fluidised bed furnance, in Brown, R H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., the Conference, Melbourne, Vic [E1]
DRO entry for this publication

Long, John (2003) Surface analysis of aluminium by glow-discharge optical emission spectrometry, in Cashion, John; Finlayson, Trevor; Paganin, David; Smith, Andrew and Troup, Gordon (eds), Proceedings of the 27th Annual A&NZIP Condensed Matter and Materials Meeting, Australian Institute of Physics, Parkville, Vic. [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Dynamic analysis of instantaneous heat transfer between immersed surface and fluidised beds based on FE Simulation, ICIAM 2003 : 5th international congress on industrial and applied mathematics, Australian Mathematical Society, Sydney, N.S.W. [E2]
DRO entry for this publication

King, Peter, Reynoldson, Ray*, Brownrigg, Allan and Long, John (2003) Fluidised bed CrN coating formation on pre-nitrocarburised plain carbon steel, Heat treating and surface engineering : proceedings of the 22nd Heat Treating Society Conference and the 2nd International Surface Engineering Congress : 15-17 September, 2003, Indianapolis, Indiana, USA, pp. 467-475, ASM International, Materials Park, OH [E2]
DRO entry for this publication

Long, John, Haynes, D.* and Hodgson, Peter (2003) Characterisation of galvanneal coatings on strip steel, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, pp. 1-6, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L2]
DRO entry for this publication

King, Peter, Long, John, Brownrigg, Allan and Reynoldson, Ray W.* (2003) Nitrocarburising of tool steels in a fluidised bed furnance, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, p. 1, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L3]
DRO entry for this publication

Long, John, Gao, Weimin and Hodgson, Peter (2003) Carbon depth-profiling in carburised steel, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, pp. 1-2, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L3]
DRO entry for this publication

2002 School of Engineering

Long, John (2002) Surface analysis of steel by glow-discharge optical emission spectrometry, 1st National Steel Processing & Performance Conference, pp. 1-10, Institute of Materials Engineering Australasia Ltd (IMEA), Geelong, Vic. [L3]
DRO entry for this publication

Toh, S. K.*, McCulloch, D.*, du Plessis, Johan*, Paterson, P. J. K.*, Hughes, A. E.*, Jamieson, D.*, Rout, B.*, Long, John and Stonham, A.* (2002) An investigation of the native oxide of aluminum alloy 7475-T7651 using XPS, AES, TEM, EELS, GDOES and RBS, 7th International Conference on the Structure of Surfaces, p. 1, World Scientific, Singapore [L3]
DRO entry for this publication

2001 School of Engineering

Long, John (2001) Glow-discharge optical emission spectrometry for elemental depth-profiling in materials, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Proceedings of Engineering Materials 2001, pp. 87-92, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Long, John (2001) Depth-profile analysis of elements by glow discharge optical emmission specrometry, APCNDT 2001 : technology 2001 and beyond : Proceedings of the 10th Asia-Pacific Conference on Non-Destructive Testing, pp. 1-6, Australian Institute for Non Destructive Testing, Australia [L2]
DRO entry for this publication

2000 School of Engineering

Long, J., Conn, A.*, Batchelor, W.* and Evans, R.* (2000) Comparision of methods to measure fibril angle in wood fibres, Appita Journal, vol. 0, no. 0, pp. 206-209, Pulp & Paper Industry Inc., Carlton, Victoria [C1]
ERA journal ID: 4869 – Scopus EID: Not tagged
no DRO entry yet for this publication

Long, J., Goodman, D.* and Hunault, P.* (2000) Elemental depth profiling in solids by glow-discharge optical emission spectrometry, in n/a (ed.), 14th National Congress of the Australian Institute of Physics, p. 24, Adelaide University, Adelaide [L3]
no DRO entry yet for this publication

Long, J. and Florance, J. (2000) Internet control of a fluid-mechanics practical for distance education students, 14th National Congress of the Australian Institute of Physics, p. 47, AIP 2000, Australia [L3]
no DRO entry yet for this publication

1999 School of Engineering

Long, J., Finlayson, T.* and Mernagh, T.* (1999) Materials analysis of Yttrium-Barium-Copper-Oxide by Micro-Raman Spectroscopy and Optical Microscopy, IEEE Transactions on Applied Superconductivity, vol. 0, no. 0, pp. 1816-1819, Institute of Electrical and Electronics Engineers, New York [C1]
ERA journal ID: 4442 – Scopus EID: Not tagged
no DRO entry yet for this publication

1999 School of Engineering and Information Technology

Long J. M., Finlayson, T. R.* and Mernagh, T. P.* (1999) Materials analysis of yttrium-barium-copper-oxide by micro-raman spectroscopy and optical microscopy, IEEE transactions on applied superconductivity, vol. 9, no. 2, pp. 1816-1819, Institute of Electrical and Electronics Engineers, Piscataway, N.J. [C1.1]
ERA journal ID: 4442 – Scopus EID: 2-s2.0-0032659553
DRO entry for this publication

1998 School of Engineering

Long, J., Finlayson, T.* and Mernagh, T.* (1998) Measuring Oxygen Stoichiometry in YBa2Cu3O7-X by Micro-Raman Spectroscopy, Superconductor Science and Technology, vol. 0, no. 0, pp. 1137-1142, IOP Publishing Ltd, "Bristol, UK" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

1998 School of Engineering and Information Technology

Long, J. M., Finlayson, T. R.* and Mernagh, T. P.* (1998) Measuring oxygen stoichiometry in YBa2Cu3O7-x by micro-raman spectroscopy, Superconductor science and technology, vol. 11, no. 10, pp. 1137-1142, Institute of Physics Publishing Ltd., Bristol, Engalnd [C1.1]
ERA journal ID: 1150 – Scopus EID: 2-s2.0-0344572204
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

1997 School of Engineering

Florance, J., Long, J. and Lemckert, C.* (1997) First Year Engineering Students and the Non-Traditional Delivery of a Practical, Australasian Asssociation for Engineering Education, pp. 413-417, "University of Ballarat, School of Engineering", Ballarat, Victoria [E1]
no DRO entry yet for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2006: $248
  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Research Income - Industry and Other Funding

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Higher Degree by Research Completions supervised by John M Long

2009

Sina Ighaniyan
Master of Engineering, Thesis entitled: Cracking and Distortion of Water Jackets in Engine Blocks.
School of Engineering Requires an Internet connection

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Monday 28th July 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011