Research Services Division

Deakin Research

Research Output for Xiang Ma

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2009 Institute for Frontier Materials

Ma, X., Lapovok, R.*, Gu, C.*, Molotnikov, A.*, Estrin, Y.*, Pereloma, E.V.*, Davies, C.H.J.* and Hodgson, P. D. (2009) Deep drawing behaviour of ultrafine grained copper : modelling and experiment, Journal of materials science, vol. 44, no. 14, pp. 3807-3812, Springer, New York, N.Y. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-67649387998
Citation counts: Scopus - 15, Thomson - 13
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Barnett, Matthew, Keshavarz, Zohreh, Beer, Aiden and Ma, Xiang (2008) Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy, Acta materialia, vol. 56, no. 1, pp. 5-15, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-36249029905
Citation counts: Scopus - 108
DRO entry for this publication

Ma, Xiang and Barnett, Matthew (2008) Influences of steady and cyclic die rotation on the compression of aluminium, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 483-484, pp. 444-447, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-41849096027
Citation counts: Thomson - 1
DRO entry for this publication

Barnett, M. R., Arhatari, B.*, Stanford, N., Beer, A. G., Keshavarz, Z. and Ma, X. (2008) Some issues relating to the ductility of wrought magnesium alloys, in Pekguleryuz, Mihriban O.; Neelameggham, Neale R.; Beals, Randy S. and Nyberg, Eric A (eds), TMS 2008: Linking Science and Technology for Global Solutions : TMS 2008 Annual Meeting and Exhibition, pp. 85-88, Minerals, Metals and Materials Society, Warrendale, Pa. [E1]
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Barnett, Matthew, Keshavarz, Zohreh and Ma, Xiang (2006) A semianalytical Sachs model for the flow stress of a magnesium alloy, Metallurgical and materials transactions A, vol. 37, no. 7, pp. 2283-2293, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-33746050742
Citation counts: Scopus - 48, Thomson - 43
DRO entry for this publication

2005 School of Engineering

Barnett, Matthew, Davies, C. H. J.* and Ma, Xiang (2005) An analytical constitutive law for twinning dominated flow in magnesium, Scripta materialia, vol. 52, no. 7, pp. 627-632, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-12344329693
Citation counts: Scopus - 49
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Davies, C.H.J.* (2005) Modelling the influence of strain on the yield surface of magnesium, in Banabic, Dorel (eds), Proceedings of the 8th ESAFORM Conference on Material Forming, pp. 395-398, Publishing House of the Romanian Academy, Bucharest, Romania [E1]
DRO entry for this publication

Ma, X and Barnett, Matthew (2005) An upper bound analysis of forward extrusion through rotating dies, in Banabic, Dorel (eds), Proceedings of the 8th ESAFORM Conference on Material Forming, pp. 565-568, Publishing House of the Romanian Academy, Bucharest, Romania [E1]
DRO entry for this publication

2004 School of Engineering

Barnett, Matthew, Ma, Xiang and Oudin, Alexis (2004) Generating misorientations in shear deformation structures, Materials transactions (JIM), vol. 45, no. 7, pp. 2151-2156, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-4544303268
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Forward extrusion through steadily rotating conical dies. Part II: theoretical analysis, International journal of mechanical sciences, a cooperative research centre for cast, metals manufacturing, vol. 46, no. 3, pp. 465-489, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-2942668418
Citation counts: Scopus - 13
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Forward extrusion through steadily rotating conical dies. Part I: experiments, International journal of mechanical sciences, vol. 46, no. 3, pp. 449-464, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-2942707864
Citation counts: Scopus - 24
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Friction changes during compression tests using tool rotation technique, Key engineering materials, vol. 274, no. 276, pp. 895-900, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-33646252032
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Stress analysis of compression of aluminium with rotating tools, in Nie, J. F.; Morton, A. J. and Muddle, B. C. (eds), Aluminium alloys : their physical and mechanical properties : proceedings of the 9th International Conference on aluminium alloys (ICAA9), pp. 1123-1127, IMEA, North Melbourne, Vic. [E1]
DRO entry for this publication

Youn, S.*, Park, J.*, Park, C.*, Kim, Yun-Hwan* and Ma, Xiang (2004) Aluminium powder forging process using a rotating platen, in Nie, J. F.; Morton, A. J. and Muddle, B. C. (eds), Aluminium alloys : their physical and mechanical properties : proceedings of the 9th International Conference on aluminium alloys (ICAA9), pp. 212-217, IMEA, North Melbourne, Vic. [E2]
DRO entry for this publication

2003 School of Engineering

Kim, Y. H.*, Ma, Xiang, Hodgson, Peter and Barnett, Matthew (2003) Multi equal channel angular pressing with rotational dies, Materials science forum, vol. 426, no. 432, pp. 2777-2782, Trans Tech Publications, Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2003) Experimental and theoretical investigation of compression of a cylinder using a rotating platen, International journal of mechanical sciences, vol. 45, no. 10, pp. 1717-1737, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-1342281096
Citation counts: Scopus - 2
DRO entry for this publication

Ma, X., Barnett, M. R. and Kim, Y. H.* (2003) Deformation behaviour of a cylinder under simultaneous compression and torsion, in Zhang, L.C. and Lu, G (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002), pp. 767-772, Trans Tech Publications, Uetikon-Zuerich, Switzerland [E1]
DRO entry for this publication

2002 External

Li, Peijun*, Sun, Tieheng*, Stagnitti, Frank, Zhang, Chungui*, Zhang, Hairong*, Xiong, Xianzhe, Allinson, Graeme, Ma, Xuejun* and Allinson, Mayumi (2002) Field-scale bioremediation of soil contaminated with crude oil, Environmental engineering science, vol. 19, no. 5, pp. 277-289, Mary Ann Liebert Publishers, Larchmont, N.Y. [C1]
ERA journal ID: 4671 – Scopus EID: 2-s2.0-0036032609
Citation counts: Scopus - 9, Thomson - 10
DRO entry for this publication

2001 School of Engineering

Ma, Xiang, Barnett, Matthew and Kong, Lingxue (2001) Slab analysis of cyclic torsional extrusion, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 38-43, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Kong, Lingxue, Ma, Xiang, Wang, B.* and Lu, G.* (2001) Computational simulation of thin film coating during scratching, in Meech, John A. (eds), IPMM-2001, the Third International Conference on Intelligent Processing and Manufacturing of Materials, pp. 1-8, CRC Press, Boca Raton, Fla. [E2]
DRO entry for this publication

Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Formation mechanism of inner-wall fold in thick lead tube under axial compression with fixed ends, in Wong, Joseph (eds), Proceedings of the Worley Australasian Finite Element Conference : the Windsor, Melbourne, Australia : 22-23 February 2001, pp. 140-149, Worley Limited, Melbourne, Vic. [E2]
DRO entry for this publication

Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Numerical simulation of forward extrusion with cyclic die rotation, in Meech, John A. (eds), IPMM-2001: the Third International Conference on Intelligent Processing and Manufacturing of Materials and Manufacturing of Materials 3rd International Conference, pp. 1-11, CRC Press, Boca Raton, Fla. [E2]
DRO entry for this publication

2000 School of Engineering

Ma, X., Wang, B.*, Kong, L. and Barnett, M. (2000) FEM Simulation of Torsion Tests for Pre-Deformed Lead with Work-Softening, Key Engineering Materials, vol. 0, no. 0, pp. 407-412, Trans Tech Publications, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L., Wang, B.*, Lu, G.* and Ma, X. (2000) Computational Characterising of Thin Film Coating, in Professor E.D Doyle (ed.), 12th International Federation for Heat Treatment and Surface Engineering Congress, pp. 223-228, Institute of Materials Engineering Australasia Ltd, Australia [E1]
no DRO entry yet for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Xiang Ma

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 23rd July 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011