Research Services Division

Deakin Research

Research Output for Jonathan G Mullins

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2013 Institute for Frontier Materials

Sabirov, I.*, Yang, C.*, Mullins, J. and Hodgson, P. D. (2013) A theoretical study of the structure–property relations in ultra-fine metallic materials with fractal microstructures, Materials science and engineering A, vol. 559, pp. 543-548, Elsevier S. A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84867743658
Citation counts: Scopus - 2
DRO entry for this publication

2009 Institute for Frontier Materials

Sudharsan, Ranjani, Mullins, J., Rolfe, B. and Hodgson, P. (2009) Development of material models to predict the crashworthiness of tubes, in AutoCRC Project Review Committee (ed.), AutoCRC Conference 2009 : Smarter, Safer, Cleaner, pp. 1-12, Cooperative Research Centre for Advanced Automotive Technology Ltd (AutoCRC), Melbourne, Vic. [E1]
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Barnett, M., Jacob, S., Gerard, B.* and Mullins, J. (2008) Necking and failure at low strains in a coarse-grained wrought Mg alloy, Scripta materialia, vol. 59, no. 10, pp. 1035-1038, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-51349154109
Citation counts: Scopus - 17, Thomson - 19
DRO entry for this publication

Yang, Chunhui, Sabirov, Ilchat, Mullins, Jonathan and Hodgson, Peter (2008) Analytic prediction of structural stress-strain relations of microstructured metal, Advanced materials research, vol. 32, pp. 83-86, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749114142
Citation counts: Scopus - 1
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Collins, Paul K., Mullins, Jonathan G., Rolfe, Bernard and Hodgson, Peter (2007) Modelling factors of square tubes in high speed bending situations, in Unknown (ed.), SAE 2007 World Congress, pp. 1-6, SAE International, Warrendale, Pa. [E1]
DRO entry for this publication

Mullins, Jonathan, Hodgson, Peter and Hilditch, Tim (2007) Stress response of advanced high strength steels using tapered tensile specimens and digital image correlation method, MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 85-98, MS & T, Detroit, Michigan [E2]
DRO entry for this publication

2004 School of Engineering

Mullins, Jonathan G., Hodgson, Peter and Dingle, Matthew E. (2004) Using inverse analysis to obtain material behaviour for crash simulations, Steel grips, vol. 2, no. Supplement, pp. 535-540, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

2003 School of Engineering

Mullins, Jonathan, Hodgson, Peter, Dingle, Matthew, Pidvysotskyy, Valery* and Gawad, Jerzy* (2003) Using Abaqus to predict the flow behaviour of metals, Proceedings of the Worley Australasian Finite Element Conference : the Mansion Hotel, Melbourne, Australia : 23-26 September 2003., Worley Limited, Melbourne, Vic. [E2]
DRO entry for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Jonathan G Mullins

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Friday 1st August 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011