Skip to main content

Research Services Division

Deakin Research

Research Output for Dr Ashwin Polishetty

Note: The 2012, 2013, 2014, 2015 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2014 School of Engineering

Polishetty,A, Goldberg,M, Littlefair,G, Puttaraju,M*, Patil,P and Kalra,A* (2014) A preliminary assessment of machinability of titanium alloy Ti 6Al 4V during thin wall machining using trochoidal milling, Procedia engineering, vol. 97, pp. 357-364, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 124648 – Scopus EID: 2-s2.0-84922330608
DRO entry for this publication

Polishetty,A, Littlefair,G and Praveen Kumar,K* (2014) Machinability assessment of titanium alloy Ti-6Al-4V for biomedical applications, Advanced materials research, vol. 941-944, pp. 1985-1990, Trans Tech Publications Ltd., Lausanne, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84903452017
DRO entry for this publication

Dzitac,P, Md Mazid,A*, Littlefair,G and Polishetty,A (2014) The effective radius and resistance to slippage, in Filipe,J; Gusikhin,O; Madani,K and Sasiadek,J (eds), ICINCO 2014 - Proceedings of the 11th International Conference on Informatics in Control, Automation and Robotics, pp. 396-401, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Polishetty,A and Littlefair,G (2014) Recent advances in machining of Austempered Ductile Iron to avoid machining induced microstructural phase transformation reaction, in Unknown (ed.), ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014; Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference, pp. 1-7, ASME, New York, NY [E1]
DRO entry for this publication

Polishetty,A, Chandrasekaran,S, Goldberg,M, Littlefair,G, Steinwedel,J and Stojcevski,A (2014) Enhancing student learning outcomes in manufacturing engineering through design based learning, in Findlay,J (eds), AAEE 2014 : Assessment and Learning for Engineering : Proceedings of the Australasian Association for Engineering Education Conference and IEEE International Conference on Teaching, pp. 1-12, Australasian Association for Engineering Education, Palmerston North, NZ [E1]
DRO entry for this publication

2013 School of Engineering

Polishetty, Ashwin, Littlefair, Guy and Pasang, Timotius* (2013) A case study on effect of feed rate on machinability of austempered ductile iron, Advanced materials research, vol. 748, pp. 247-251, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84884807378
DRO entry for this publication

Polishetty, Ashwin, Littlefair, Guy, Musselwhite, Thomas and Sonavane, Chinmay* (2013) A preliminary study on machinability assessment of nanobainite steel, in unknown (ed.), IMECE 2013 : Advanced Manufacturing : Proceedings of the ASME International Mechanical Engineering Congress & Exposition, pp. 1-6, ASME, New York, NY [E1]
DRO entry for this publication

Polishetty, Ashwin, Manoharan, Vignesh*, Littlefair, Guy and Sonavane, Chinmay* (2013) Machinability assessment of Ti-6Al-4V for aerospace applications, in Durbetaki, Pandeli and Donnell, Jeffrey (eds), ASME District F-ECTC 2013 : Proceedings of the ASME District F- Early Career technical conference, pp. 53-58, ASME, New York, N. Y. [E1]
DRO entry for this publication

Sonavane, Chinmay*, Polishetty, Ashwin and Littlefair, Guy (2013) Machinability and phase transformation study of nanobainite steels, in Durbetaki, Pandeli and Donnell, Jeffrey (eds), ASME District F-ECTC 2013 : Proceedings of the ASME District F- Early Career technical conference, pp. 41-45, ASME, New York, N. Y. [E1]
DRO entry for this publication

2010 External

Polishetty, Ashwin* and Littlefair, Guy* (2010) Assessment of machining characteristics of austempered ductile iron, Advanced materials research, vol. 97-101, pp. 2036-2039, Trans Tech Publications, Stafa-Zurich, Switzerland [C1.1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-77951013558
Citation counts: Scopus - 1
DRO entry for this publication

Polishetty, Ashwin*, Goldberg, Moshe* and Littlefair, Guy* (2010) Wear characteristics of ultra-hard cutting tools when machining austempered ductile iron, International journal of mechanical and mechatronics engineering, vol. 10, no. 1, pp. 1-6, IJENS Publisher, Rawalpindi, India [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Polishetty, Ashwin*, Pan, Bing Bill*, Pasang, Timotius* and Littlefair, Guy* (2010) Microstructural study on strain induced transformation in austempered ductile iron using heat tinting, in Unknown (ed.), MSEC 2010 : Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference, pp. 239-245, The Conference, Erie, Pennsylvania [E1.1]
DRO entry for this publication

2009 External

Polishetty, Ashwin*, Littlefair, Guy* and Singamneni, Sarah* (2009) A comparative assessment of austempered ductile iron as a substitute in weight reduction applications, in unknown (ed.), MSEC2008 : Proceedings of the ASME International Manufacturing Science and Engineering Conference. Volume 1., pp. 49-58, American Society of Mechanical Engineers, New York [E1.1]
DRO entry for this publication

2008 External

Polishetty, Ashwin*, Littlefair, Guy* and Singamneni, Sarat* (2008) Characterisation of machinability of Austempered Ductile Iron through drilling, in Unknown (ed.), NZ Metals 2008 : Proceedings of the 4th Metals Industry Conference, p. 1, HERA, Auckland, N.Z. [E2.1]
DRO entry for this publication

Polishetty, Ashwin*, Littlefair, Guy* and Singamneni, Sarat* (2008) Machining characteristics of Austempered Ductile Iron (ADI), in Unknown (ed.), Proceedings of the 2008 Industrial Tooling conference, p. 1, The Conference, Starkville, Miss. [E2.1]
DRO entry for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Dr Ashwin Polishetty

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Saturday 30th May 2015 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

4th May 2015