Research Services Division

Deakin Research

Research Output for Bernard Rolfe

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2014 School of Engineering

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) An experimental investigation of edge strain and bow in roll forming a V-section, Materials science forum, vol. 773-774, pp. 153-159, Trans Tech Publications, Durnten-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Sensitivity analysis of roll load, torque and material properties in the roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 900-903, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Effect of temper rolling on final shape defects in a V-section roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 896-899, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) The effect of forming strategy on the longitudinal bow in roll forming of advanced high strength steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 876-879, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation about the effect of increasing the number of forming passes on the quality of AHSS roll formed products, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 872-875, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Jiao, Jingsi, Rolfe, Bernard, Mendiguren, Joseba* and Galdos, Lander* (2014) The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 892-895, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation on the effect of skin passing and roller leveling on the bending behaviour of mild steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 452-455, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Mendiguren, Joseba*, Hanselmanb, Stijn*, Atzemac, Eisso*, Hodgson, Peter, Rolfe, Bernard and Weiss, Matthias (2014) Characterization of a dual phase steel using tensile and free bending tests, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 659-662, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

2013 School of Engineering

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter D. and Weiss, Matthias (2013) Development of an inverse routine to predict residual stresses in the material based on a bending test, Key engineering materials, vol. 554-557, pp. 949-956, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84880550088
Citation counts: Scopus - 1
DRO entry for this publication

Tafti, Roohollah Azizi*, Naeini, Hassan Moslemi*, Tehrani, Mehdi Salmani*, Rolfe, Bernard and Weiss, Matthias (2013) Theoretical extension of elastic-perfectly plastic deformation length in roll forming of a channel section, International journal of materials and product technology, vol. 47, no. 1/2/3/4, pp. 33-45, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893922690
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Experimental study into the correlation between the incremental forming and the nature of springback in automotive steels, International journal of materials and product technology, vol. 47, no. 1/2/3/4, pp. 150-161, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893952933
DRO entry for this publication

de Souza, T. and Rolfe, B.F. (2013) Understanding robustness of springback in high strength steels, International journal of mechanical sciences, vol. 68, pp. 236-245, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-84875212097
Citation counts: Scopus - 1
DRO entry for this publication

Pereira, Michael P., Weiss, Matthias, Rolfe, Bernard F. and Hilditch, Tim B. (2013) The effect of the die radius profile accuracy on wear in sheet metal stamping, International journal of machine tools and manufacture, vol. 66, pp. 44-53, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3606 – Scopus EID: 2-s2.0-84871738769
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Wiebenga, J.H.*, Weiss, M., Rolfe, B. and Van Den Boogaard, A.H.* (2013) Product defect compensation by robust optimization of a cold roll forming process, Journal of materials processing technology, vol. 213, no. 6, pp. 978-986, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84873978941
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Abdollahpoor, Amir, Chen, Xiangjun*, Pereira, Michael, Asgari, Alireza, Xiao, Namin* and Rolfe, Bernard (2013) Applying a modified austenite transformation model into a thermo-mechanical model of hot stamping, in Unknown (ed.), IDDRG 2013 : Proceedings of the International Deep-Drawing Research Group. Conference, pp. 155-160, Institute of Virtual Manufacturing, Zurich, Switzerland [E1]
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) A first step towards in-line shape compensation for roll forming applications, in unknown (ed.), IDDRG 2013 : Proceedings of the 2013 International Deep-Drawing Research Group annual conference, pp. 93-97, IDDRG, Zurich, Switzerland [E1]
DRO entry for this publication

Badr, Ossama Mamdouh, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) The numerical investigation of the material behavior of high strength sheet materials in incremental forming, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMIFORM 2013 : Proceedings of Numerical Methods in Industrial Forming Processes 2013 international conference, pp. 513-519, AIP Publishing, College Park, Maryland [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Jiao, Jingsi, Rolfe, Bernard, Mendiguren, Joseba*, Galdos, Lander* and Weiss, Matthias (2013) The effect of process parameters on web-warping in the flexible roll forming of UHSS, in Unknown (ed.), TTP 2013: Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference, pp. 1-10, The Conference, Graz, Austria [E2]
DRO entry for this publication

Pereira, Michael P., Weiss, Matthias and Rolfe, Bernard F. (2013) Towards tool life precition in sheet metal stamping, in Unknown (ed.), TTP 2013 : Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference, pp. 1-10, The Conference, Graz, Austria [E2]
DRO entry for this publication

Badr, Ossama Mamdouth, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Manufacturing structural components made of Ti-6AI-4V at room temperature, in Unknown (ed.), AeroMat 2013 : Proceedings of the 24th Advanced Aerospace Materials and Processes Conference and Exposition, p. 1, AeroMat, Bellevue, Washj. [E3]
DRO entry for this publication

2013 Institute for Frontier Materials

Pan, Libo*, Rolfe, Bernard, Asgari, Alireza, Weiss, Matthias and Zhang, Zhijian* (2013) Investigation on forming limit properties of dual phase steel, in Unknown (ed.), NUMIFORM 2013 : Proceedings of the 11th International Conference on Numerical Methods in Industrial Forming Processes, pp. 850-856, AIP Publishing, Melville, N.Y. [E1]
DRO entry for this publication

2012 School of Engineering

Asgari, A., Yang, C.* and Rolfe, B.F. (2012) Modern enhancements in teaching design theories to mechanical engineering students, Australasian journal of engineering education, vol. 18, no. 1, pp. 25-34, Institution of Engineers Australia, Sydney, N.S.W. [C1]
ERA journal ID: 40310 – Scopus EID: Not tagged
DRO entry for this publication

Okonkwo, Paul C., Kelly, Georgina, Rolfe, Bernard F. and Pereira, Michael P. (2012) The effect of temperature on sliding wear of steel-tool steel pairs, Wear, vol. 282-283, pp. 22-30, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84858702686
Citation counts: Scopus - 1
DRO entry for this publication

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2012) Wear at the die radius in sheet metal stamping, Wear, vol. 274-275, pp. 355-367, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84855268548
Citation counts: Scopus - 4
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Hodgson, Peter D. and Yang, Chunhui (2012) Effect of residual stress on the bending of aluminium, Journal of materials processing technology, vol. 212, no. 4, pp. 877-883, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84856000610
Citation counts: Scopus - 6, Thomson - 2
DRO entry for this publication

Yan, Wenyi*, Pereira, Michael P. and Rolfe, Bernard F. (2012) Tool wear in sheet metal stamping, Advanced materials research, vol. 421, pp. 750-753, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84255177644
DRO entry for this publication

Datta, S.*, Hanafin, S., Rolfe, B. and de Souza, T. (2012) Physical prototypes in cross-functional team collaboration : a study of the Model-T2 concept car project, in Bartolo, Paulo J.; Soares de Lemos, Ana C.; Tojeira, Ana P. O.; Pereira, Antonio M. H.; Mateus, Artur J.; Mendes, Ausenda L. A.; dos Santos, Cyril; Freitas, Dino M. F.; Bartolo, Helena M.; de Amorim Almeida, Henrique; dos Reis, Igor M.; Dias, Juliana R.; (eds), VRAP 2011 : Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping, pp. 779-784, CRC Press, Boca Raton, Fla. [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2012) Effect of roller leveling on the bending behaviour of aged steel strip, in Mori, K.; Pietrzyk, M.; Kusiak, J.; Majta, J.; Hartley, P. and Lin, J. (eds), Metal Forming 2012 : Proceedings of the 14th International Conference on Metal Forming, pp. 699-702, Wiley-VCH, Krakow, Poland [E1]
DRO entry for this publication

Weiss, Matthias, Kupke, Andreas and Rolfe, Bernard (2012) Effect of tensile pre-strain on bending and unloading of automotive steels, in Unknown (ed.), IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, pp. 409-415, International Deep-Drawing Research Group, Mumbai, India [E1.1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Larranaga, Jon*, Glados, Lander*, Yang, Chunhui* and Weiss, Matthias (2012) Using the solid-shell element to model the roll forming of large radii profiles, in Unknown (ed.), Steel Research Journal : Proceedings of the 14th International Conference on Metal Forming, pp. 711-714, Wiley, London, England [E2.1]
DRO entry for this publication

Asgari, Alireza and Rolfe, Bernard F. (2012) Pedagogy of engineering design and engineering graphics, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, p. 943, ESER group, Swinburne University of Technology, Melbourne, Vic. [E3]
DRO entry for this publication

Rolfe, Bernard and Pereira, Michael (2012) Contact conditions and thermal effects on tooling wear when stamping AHSS, in Unknown (ed.), ICMPC 2012 : Proceedings of the 2nd International Conference on Materials, Processing and Characterization, The Conference, Hyderabad, India [E3]
DRO entry for this publication

2012 Institute for Frontier Materials

Fiedler, K., Rolfe, B., Asgari, A. and de Souza, T. (2012) A systems approach to shape and topology optimisation of mechanical structures, in Hernandez, S.; Brebbia, C.A. and De, Wilde W.P. (eds), OPTI 2012 : Computer aided optimum design in engineering XII, pp. 145-154, WIT Press, Southampton, England [E1]
DRO entry for this publication

2011 School of Engineering

Hemmerich, E., Rolfe, B., Hodgson, P. D. and Weiss, M. (2011) The effect of pre-strain on the material behaviour and the Bauschinger effect in the bending of hot rolled and aged steel, Materials science and engineering a, vol. 528, no. 9, pp. 3302-3309, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79951682388
Citation counts: Scopus - 8
DRO entry for this publication

Ma, Lianhua*, Rolfe, Bernard F., Yang, Qingsheng* and Yang, Chunhui (2011) The configuration evolution and macroscopic elasticity of fluid-filled closed cell composites : micromechanics and multiscale homogenization modelling, Computer modeling in engineering and sciences, vol. 79, no. 2, pp. 131-158, Tech Science Press, Palmdale, Calif. [C1]
ERA journal ID: 3460 – Scopus EID: 2-s2.0-82055199178
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Weiss, M., Hemmerich, E.*, Hodgson, P. D. and Rolfe, B. (2011) Effect of thermal treatment on the bending properties of pre-strained carbon steel, Materials science and engineering A, vol. 528, no. 13-14, pp. 4528-4536, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79953289595
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Hanafin, Stuart, Datta, Sambit and Rolfe, Bernard (2011) Tree façades : generative modelling with an axial branch rewriting system, in Herr, Christiane M.; Gu, Ning and Schnabel, Marc A. (eds), CAADRIA 2011 : Circuit Bending, Breaking and Mending : Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, pp. 175-184, Association for Computer-Aided Architectural Design in Asia, Hong Kong, China [E1]
DRO entry for this publication

Okonkwo, Paul C., Pereira, Michael P., Kelly, Georgina and Rolfe, Bernard F. (2011) Effects of temperature in relation to sheet metal stamping, in Mastorakis, Nikos; Mladenov, Valeri; Lepadatescu, Badea; Karimi, Hamid Reza and Helmis, Costas G. (eds), MEQAPS 2011 : Proceedings of the 4th International Conference on Manufacturing Engineering, Quality and Production Systems, pp. 114-118, World Scientific and Engineering Academy and Society (WSEAS), Barcelona, Spain [E1]
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Yang, Chunhui, De Souza, Tim and Hodgson, Peter (2011) Review of approximate analyses of sheet forming processes, in Unknown (ed.), NUMISHEET 2011 : American Institute of Physics Conference Proceedings, pp. 986-996, American Institute of Physics, Seoul, Korea [E2]
DRO entry for this publication

2010 School of Engineering

de Souza, Timothy and Rolfe, Bernard F. (2010) Characterising material and process variation effects on springback robustness for a semi-cylindrical sheet metal forming process, International journal of mechanical sciences, vol. 52, no. 12, pp. 1756-1766, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-78049327127
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Ma, Lianhua, Rolfe, Bernard F., Yang, Qingsheng* and Yang, Chunhui (2010) On the effective mechanical properties of fluid-saturated composites : a homogenization approach, Materials science forum, vol. 654-656, pp. 2273-2276, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Ma, Lianhua, Rolfe, Bernard F., Yang, Qingsheng* and Yang, Chunhui (2010) A new solution method for homogenization of effective properties of electromagnetic honeycombs, Key engineering materials, vol. 443, pp. 551-556, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-77955435151
DRO entry for this publication

Matuszyk, Timothy I.*, Cardew-Hall, Michael J.* and Rolfe, Bernard F. (2010) The kernel density estimate/point distribution model (KDE-PDM) for statistical shape modeling of automotive stampings and assemblies, Robotics and computer-integrated manufacturing, vol. 26, no. 4, pp. 370-380, Pergamon, Oxford, England [C1]
ERA journal ID: 41932 – Scopus EID: 2-s2.0-77955661530
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2010) Sliding distance, contact pressure and wear in sheet metal stamping, Wear, vol. 268, no. 11-12, pp. 1275-1284, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-77951107324
Citation counts: Scopus - 15, Thomson - 8
DRO entry for this publication

Pereira, Michael P., Okonkwo, Paul C., Yan, Wenyi* and Rolfe, Bernard F. (2010) Deformation and frictional heating in relation to wear in sheet metal stamping, Steel research international, vol. 81, no. 9, pp. 713-716, Wiley – VCH Verlag, Weinheim, Germany [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 4
DRO entry for this publication

Sudharsan, Ranjani, Rolfe, Bernard F. and Hodgson, Peter D. (2010) The indentation behaviour of carbon fibre composite tubes-experiments & modelling, Materials science forum, vol. 654-656, pp. 2616-2619, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Sudharsan, R., Rolfe, B. F. and Hodgson, P. D. (2010) Modelling the side impact of carbon fiber tubes, in Khalili, Nasser; Valliappan, Somasundaram; Li, Qing and Russell, Adrian (eds), Proceedings of the joint 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, 19-23 July, Sydney, New South Wales, pp. 1-10, IOP Publishing Ltd, Bristol, United Kingdom [E1]
DRO entry for this publication

Wang, Xiumei*, Yang, Chunhui and Rolfe, Bernard (2010) Numerical simulations on warm forming of stainless steel with trip-effect, in Barlat, Frederic; Moon, Young Hoon and Lee, Myoung-Gyu (eds), NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, pp. 595-601, American Institute of Physics (API), Danvers, Ma. [E1]
DRO entry for this publication

Weiss, Matthias, Ryan, Will, Rolfe, Bernard and Yang, Chunhui (2010) The effect of skin passing on the material behavior of metal strip in pure bending and tension, in Barlat, Frederic; Moon, Young Hoon and Lee, Myoung-Gyu (eds), NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, pp. 896-902, American Institute of Physics (API), Danvers, Ma. [E1]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) BODY FOR PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) PNEUMATIC POWERTRAIN FOR AN AUTOMOTIVE VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) CHASSIS FOR PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) Pneumatic vehicle, Pneumatic vehicle, UNIV DEAKIN, Australia (1) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, Other international (5) [I]
DRO entry for this publication

2009 School of Engineering

Asgari, S. A., Hodgson, P. D., Yang, C. and Rolfe, B. F. (2009) Modeling of advanced high strength steels with the realistic microstructure–strength relationships, Computational materials science, vol. 45, no. 4, pp. 860-886, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-67349151745
Citation counts: Scopus - 15, Thomson - 9
DRO entry for this publication

Pereira, Michael P., Duncan, John L.*, Yan, Wenyi* and Rolfe, Bernard F. (2009) Contact pressure evolution at the die radius in sheet metal stamping, Journal of materials processing technology, vol. 209, no. 7, pp. 3532-3541, Elsevier B.V., Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-62949188952
Citation counts: Scopus - 16, Thomson - 13
DRO entry for this publication

Sudharsan, Ranjani, Mullins, J., Rolfe, B. and Hodgson, P. (2009) Development of material models to predict the crashworthiness of tubes, in AutoCRC Project Review Committee (ed.), AutoCRC Conference 2009 : Smarter, Safer, Cleaner, pp. 1-12, Cooperative Research Centre for Advanced Automotive Technology Ltd (AutoCRC), Melbourne, Vic. [E1]
DRO entry for this publication

Weiss, Matthias, Pereira, Michael, Rolfe, B. F. and Hilditch, Tim (2009) Wear mechanisms in forming of HSS and AHSS, in Levy, B.S.; Matlock, D.K. and Van Tyne, C.J. (eds), IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the International Deep-Drawing Research Group 2009 annual conference, pp. 691-702, IDDRG, Golden, Colo. [E1.1]
DRO entry for this publication

2008 School of Engineering and Information Technology

Asgari, S. A., Hodgson, P. D., Lemiale, V.*, Yang, C. and Rolfe, B. F. (2008) Multiscale particle-in-cell modelling for advanced high strength steels, Advanced materials research, vol. 32, pp. 285-288, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749122306
Citation counts: Scopus - 1
DRO entry for this publication

Asgari, S.A., Pereira, M., Rolfe, B.F., Dingle, M. and Hodgson, P.D. (2008) Statistical analysis of finite element modeling in sheet metal forming and springback analysis, Journal of materials processing technology, vol. 203, no. 1-3, pp. 129-136, Elsevier SA, Zürich, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-43849103630
Citation counts: Scopus - 27, Thomson - 20
DRO entry for this publication

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2008) Contact pressure evolution and its relation to wear in sheet metal forming, Wear, vol. 265, no. 11-12, pp. 1687-1699, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-54149109135
Citation counts: Scopus - 25, Thomson - 22
DRO entry for this publication

Rafiee, Reza, Rolfe, Bernard F. and Yan, Wenyi* (2008) Simulation of contact pressure in sheet metal trimming/blanking process, Advanced materials research, vol. 41-42, pp. 463-468, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-56349157450
DRO entry for this publication

Rolfe, B. F., Asgari, S. A. and Hodgson, P. D. (2008) The forming of advanced high strength steels for the automotive industry, Steel Research International, vol. Special issue; 1, pp. 9-18, Verlag Stahleisen., Düsseldorf, Germany [C1.1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Asgari, S. Alireza, Yang, Chunhui, Hodgson, Peter D. and Rolfe, Bernard F. (2008) Multiphase material modelling by multiscale particle-in-cell method, in El-Azab, Anter (eds), MMM 2008 : Proceedings of the 4th International Conference on Multiscale Materials Modeling, pp. 547-550, Department of Scientific Computing, Tallahassee, Fla. [E1]
DRO entry for this publication

de Souza, T. and Rolfe, B. F. (2008) Accuracy and precision assesment of stochastic simulation tools for springback variation, in Hora, Pavel (eds), NUMISHEET 2008 : Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 539-544, ETH Eidgenössische Technische Hochschule, Zurich, Switzerland [E1]
DRO entry for this publication

Ekanayake, Samitha W., Pathirana, Pubudu, Rolfe, Bernard F. and Palaniswami, Marimuthu* (2008) Energy efficient, fully-connected mesh networks for high speed applications, in Unknown (ed.), VTC 2008 : IEEE 67th Vehicular Technology Conference, pp. 2606-2610, IEEE, Piscataway, N.J. [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Pereira, M. P., Yan, W.* and Rolfe, B. F. (2008) Contact pressure prediction in sheet metal forming using finite element analysis, in Asnafi, Nader (eds), IDDRG 2008 : Proceedings of the IDDRG 2008 Conference : Best in class stamping, 16-18 June 2008, Olofström, Sweden, pp. 361-371, Industriellt utvecklingscentrum i Olofström AB, Olofström, Sweden [E1]
DRO entry for this publication

Rolfe, Bernard, Nahavandi, Saeid and Hodgson, Peter (2008) Recent developments in automotive manufacturing using advanced high strength steels, in Raj, Baldev (eds), ICAMT 2008 : Proceedings of the Advances in Manufacturing Technology 2008 international conference, pp. 1-16, Indian National Academy of Engineering (INAE), Chennai, India [E1]
DRO entry for this publication

Yang, Chunhui, Zhang, Y.* and Rolfe, Bernard (2008) Special finite element-based unit cell approach for the prediction of mechanical properties of foamed titanium, in Fan, Jinghong and Chen, Haibo (eds), ICHMM 2008 : Advances in heterogeneous material mechanics, 2008 : proceedings of the second International Conference on Heterogeneous Material Mechanics, June 3-8, 2008, Huangshan, China, pp. 329-333, DEStech Publications, Lancaster, Pa. [E1]
DRO entry for this publication

Asgari, S. A., Hodgson, P. D. and Rolfe, B. F. (2008) Multiscale particle-in-cell for advanced high strength steels, in Bell, John (eds), FMST 2008 : Frontiers in materials science and technology, Trans Tech Publications, Stafa-Zurich, Switzerland [E1.1]
DRO entry for this publication

Rolfe, Bernard, Asgari, Alireza and Hodgson, Peter (2008) The forming of advanced high strength steels for the automotive industry, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal forming 2008 : [proceedings of] the 12th International Conference on Metal Forming 2008, Akademia Górniczo-Hutnicza, Kraków, Poland, September 21-24, 2008, pp. 9-18, Verlag Stahleisen [E3]
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

de Souza, T. and Rolfe, B. (2008) Multivariate modelling of variability in sheet metal forming, Journal of materials processing technology, vol. 203, no. 1-3, pp. 1-12, Elsevier SA, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-43849109463
Citation counts: Scopus - 25, Thomson - 18
DRO entry for this publication

2007 School of Engineering

Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2007) The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming, Journal of engineering materials and technology, vol. 129, no. 4, pp. 530-537, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 3776 – Scopus EID: 2-s2.0-36049019926
Citation counts: Scopus - 12, Thomson - 8
DRO entry for this publication

2007 School of Engineering and Information Technology

Matuszyk, T. I.*, Cardew-Hall, M.* and Rolfe, Bernard (2007) The effect of clamping sequence on dimensional variability in sheet metal assembly, Virtual and physical prototyping, vol. 2, no. 3, pp. 161-171, Taylor & Francis, Abingdon, England [C1]
ERA journal ID: 3830 – Scopus EID: 2-s2.0-36448969445
DRO entry for this publication

Pereira, Michael, Yan, Wenyi and Rolfe, Bernard (2007) Modeling of contact pressure in sheet metal forming, Materials Science Forum, vol. 561, no. 565, pp. 1975-1978, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 7
DRO entry for this publication

Collins, Paul K., Mullins, Jonathan G., Rolfe, Bernard and Hodgson, Peter (2007) Modelling factors of square tubes in high speed bending situations, in Unknown (ed.), SAE 2007 World Congress, pp. 1-6, SAE International, Warrendale, Pa. [E1]
DRO entry for this publication

Rolfe, Bernard, Ekanayake, Samitha, Pathirana, Pubudu and Palaniswami, Marimuththu* (2007) Localization with orientation using RSSI measurements: RF map based approach, in Unknown (ed.), ISSNIP 2007 Third International Conference on Intelligent Sensors, Sensor Networks and Information Processing, pp. 311-316, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, N.J. [E1]
DRO entry for this publication

2006 School of Engineering and Information Technology

Rolfe, Bernard, Frayman, Yakov, Kelly, Georgina and Nahavandi, Saeid (2006) Recognition of lubrication defects in cold forging process with a neural network, in Kamruzzaman, Joarder; Begg, Rezaul and Sarker, Ruhul (eds), Artificial neural networks in finance and manufacturing, pp. 262-275, Idea Group Publishing, Hershey, PA [B1]
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Dingle, Matthew. and Duncan, J.* (2006) Elastic bending of steel-polymer-steel (SPS) laminates to a constant curvature, Journal of applied mechanics., vol. 73, no. 4, pp. 574-579, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 5140 – Scopus EID: 2-s2.0-33749540139
Citation counts: Scopus - 8, Thomson - 2
DRO entry for this publication

Pereira, Michael, Yan, Wenyi and Rolfe, Bernard (2006) Contact pressure and wear in sheet metal forming - an FEM analysis, in Hoffman, Mark and Price, John (eds), SIF 2006 : Conference Proceedings of the International Conference and Exhibition on Structural Integrity and Failure, pp. 73-77, Materials Australia, Sydney, N.S.W. [E1]
DRO entry for this publication

Wilkin, Tim, Frayman, Yakov and Rolfe, Bernard (2006) Adaptive control of the closed loop behaviour of manufacturing processes, in Unknown (ed.), 8th biennial ASME conference on engineering systems design and analysis July 4-7, 2006, Torino, Italy, pp. 1-9, ASME, New York, N.Y. [E1]
DRO entry for this publication

Asgari, Alireza, Lemiale, Vincent*, Sunter, Patrick*, Quenette, Steve*, Hodgson, Peter and Rolfe, Bernard (2006) Application of radial return mapping algorithm for finite strain elastoplasticity in a hybrid finite element and particle-in-cell model, in Liu, W. K. and Chen, J. S. (eds), Proceedings of the 7th World Congress of Computational Mechanics on Computational Bridging of Length Scales in Complex Materials, Los Angeles, California, 20–21 July 2006, World Congress on Computational Mechanics, Los Angeles, Calif. [E2]
DRO entry for this publication

de Souza, Timothy, Rolfe, Bernard, Duncan, John* and Hodgson, Peter (2006) Quantitative analysis of robustness in a simulated stamping process, in Santos, Abel D. (eds), Drawing the things to come : trends and advances in sheet metal forming ; IDDRG International Deep Drawing Research Group 2006 conference ; June 19 - 21, 2006, Porto, Portugal ; proceedings, pp. 1-8, Instituto de Engenharia Mecânica e Gestô Industrial, Leça do Balio, Portugal [E2]
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard and Hodgson, Peter (2006) The influence of temperature on the springback behavior of metal/polymer-laminates, in Santos, Abel D. and Rocha, Barata da (eds), Drawing the things to come : trends and advances in sheet metal forming ; IDDRG International Deep Drawing Research Group 2006 conference ; June 19 - 21, 2006, Porto, Portugal ; proceedings, pp. 199-206, Instituto de Engenharia Mecânica e Gestô Industrial, Leça do Balio, Portugal [E2]
DRO entry for this publication

2006 External

Asgari, S. A.*, Hodgson, P.*, Rolfe, B. F.*, Sunter, P.* and Lemiale, V.* (2006) Multiscale modeling of hardening mechanisms and phase transformation in TRIP steel, Xanthus : a solid mechanic code based on St. Germain framework, in Unknown (ed.), ARNAM 2006 : Proceedings of the 2006 Australian Research Network for Advanced Materials 2006 Annual Workshop, ARNAM, Brisbane, Qld. [E1.1]
DRO entry for this publication

2005 School of Engineering

Frayman, Yakov and Rolfe, Bernard (2005) A loop-shaping approach to intelligent control, in Hamza, M. H. (eds), Proceedings of the second IASTED International Conference on Biomedical Engineering : February 16-18, 2004, Innsbruck, Austria, pp. 103-108, ACTA Press, Anaheim, Calif [E1]
DRO entry for this publication

Pereira, Michael, Asgari, Alireza, de Souza, Timothy, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Sheet forming simulation and springback prediction for AHSS automotive components, in Miles, M. P. and Stoudt, M. R. (eds), Copper for the 21st century : proceedings of the conference held September 25-28, 2005 Pittsburgh, Pennsylvania USA, pp. 51-62, ASM International, Warrendale, Pa. [E1]
DRO entry for this publication

Asgari, Alireza, Pereira, Michael, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Design of experiments and springback prediction for AHSS automotive components with complex geometry, in Smith, L.M.; Pourboghrat, F.; Yoon, J.W. and Stoughton, T.B. (eds), NUMISHEET 2005 : Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 215-220, American Institute of Physics (AIP), Melville, N.Y. [E2]
DRO entry for this publication

Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2005) The influence of temperature on the formability of metal/polymer/metal-laminates, in Boudeau, N. (eds), IDDRG 2005 : Proceedings of the 24th International Deep-Drawing Research Group Congress, International Deep-Drawing Research Group, Besançon, France [E2]
DRO entry for this publication

2004 School of Engineering

Weiss, Matthias, Rolfe, Bernard F., Dingle, Matthew E. and Hodgson, Peter (2004) The influence of interlayer thickness and properties on spring-back of SPS- (steel/polymer/steel) laminates., Steel grips, vol. 2, no. Supplement, pp. 445-449, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

Rolfe, B., Abdallah, S.*, West, G.* and Cardew-Hall, M.* (2004) FE robustness : comparing sheet metal forming variation and finite element models, in Ghosh, Somnath; Castro, Jose M. and Lee, June K. (eds), NUMIFORM 2004 : Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes : Materials Processing and Design : Modelling, Simulation and Applications, pp. 958-963, American Institute of Physics, Melville, N.Y. [E2]
DRO entry for this publication

2003 School of Information Technology

Frayman, Yakov, Rolfe, Bernard F., Hodgson, Peter D. and Webb, Geoffrey I.* (2003) Improving the prediction of the roll separating force in a hot steel finishing mill, in Meech, John A.; Kawazoe, Yoshiyuki; Kumar, Vijay and Maguire, John F. (eds), IPMM 2003 : Intelligence in a small materials world : selected papers from the Fourth International Intelligent Processing and Manufacturing of Materials Conference, pp. 1-12, Intelligent Processing and Manufacturing of Materials, Sendai, Japan [E1.1]
DRO entry for this publication

2003 School of Engineering

Rolfe, Bernard, Cardew-Hall, M. J.*, Abdallah, S. M.* and West, G. A. W.* (2003) A shape error metric for sheet metal forming and its application to springback, Journal of manufacturing science and engineering, vol. 125, no. 3, pp. 468-475, ASME International, New York, N.Y. [C1]
ERA journal ID: 3614 – Scopus EID: 2-s2.0-0041733416
Citation counts: Scopus - 4
DRO entry for this publication

Rolfe, Bernard, Cardew-Hall, M.*, Abdallah, S.* and West, G.* (2003) Using geometric shape variations to create an inverse model for a sheet metal process, Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering manufacture, vol. 217, no. 12, pp. 1665-1675, Mechanical Engineering Publications Ltd., London, England [C1]
ERA journal ID: 3620 – Scopus EID: 2-s2.0-0347760055
DRO entry for this publication

Cheesewright, G.*, Cardew-Hall, M.*, Hodgson, Peter, Rolfe, Bernard and Frayman, Yakov (2003) Press shop machine analysis and trending, in Deisenroth, Michael (eds), ICPR-17 : Electronic proceedings the 17th International Conference on Production Research, pp. 1-9, Virginia Tech, Blacksburg, Va. [E1]
DRO entry for this publication

Cheesewright, G.*, Dingle, Matthew, Rolfe, Bernard, Frayman, Yakov and Cardew-Hall, M.* (2003) Development of touchscreen fault recording for an automotive press shop, in Brown, R H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia, the Conference, Melbourne, Vic. [E1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Webb, Geoff* and Hodgson, Peter (2003) Analysis of stamping production data with view towards quality management, in Brown, R. H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., pp. 1-15, the Conference, Melbourne, Vic [E1]
DRO entry for this publication

Frayman, Y. and Rolfe, B.F. (2003) Eccentricity and hardness control in cold rolling mills with a dynamically constructed neural controller, in Meech, John A.; Kawazoe, Yoshiyuki; Kumar, Vijay and Maguire, John F. (eds), IPMM 2003 : Intelligence in a small materials world : selected papers from the Fourth International Intelligent Processing and Manufacturing of Materials Conference, pp. 199-214, Intelligent Processing and Manufacturing of Materials, Sendai, Japan [E2]
DRO entry for this publication

2002 School of Information Technology

Frayman, Yakov, Rolfe, Bernard and Webb, G. (2002) Improving an inverse model of sheet metal forming by neural network based regression, in Kazerounian, Kazem (eds), Proceedings of the 2002 ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 1-12, American Society of Mechanical Engineers, New York, N.Y. [E1]
DRO entry for this publication

Frayman, Yakov, Rolfe, Bernard F. and Webb, Geoffrey I. (2002) Solving regression problems using competitive ensemble models, in McKay, Bob and Slaney, John (eds), AI 2002 : Advances in artificial intelligence : proceedings of the 15th Australian Joint Conference on Artificial Intelligence, pp. 511-522, Springer, Berlin, Germany [E1]
DRO entry for this publication

Frayman, Yakov, Rolfe, Bernard, Hodgson, Peter and Webb, G.I (2002) Predicting the rolling force in hot steel rolling mill using an ensemble model, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED International Conference, pp. 143-148, ACTA Press, New York, N.Y. [E1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Hodgson, Peter, Webb, G.I. and Kelly, Georgina (2002) Fault detection in a cold forging process through feature extraction with a neural network, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED Conference, pp. 155-159, ACTA Press, New York, N.Y [E1]
DRO entry for this publication

2001 School of Engineering and Information Technology

Rolfe, Bernard, Cardew-Hall, M. J.*, Abdallah, S. M.* and West, G. A. W.* (2001) Geometric shape errors in forging: developing a metric and an inverse model, Proceedings of the institution of mechanical engineers, part B: journal of engineering manufacture, vol. 215, no. 9, pp. 1229-1240, Professional Engineering Publishing Ltd, London, England [C1.1]
ERA journal ID: 3620 – Scopus EID: 2-s2.0-0013021319
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Grants and Consultancies

All years

Research Income - National Competitive Grants

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet, ARC Collaborative - Linkage - Projects (Round 1), Linkage PhD student, Linkage PhD student [T]

  • 2013: $75,490
  • 2012: $103,848

Rolfe, B, Hodgson, P, Forsyth, M, Xiang, Y, Doolan, M* and Pereira, M. Developing an environmentally friendly, low cost solution to reduce wear and improve productivity in metal forming, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2013: $104,207
  • 2012: $163,652

Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry [T]

  • 2012: $13,611
  • 2010: $63,321
  • 2009: $148,643
  • 2008: $150,898
  • 2007: $63,766

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products, ARC Collaborative - Linkage - Projects (Round 2, APAI) [T]

  • 2011: $40,462
  • 2010: $79,668
  • 2009: $78,050
  • 2008: $38,250

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, ARC_DUAPAI2 ARC_Deakin University Australian Postgraduate Award Industry Second [T]

  • 2009: $25,364
  • 2008: $69,288
  • 2007: $78,047
  • 2006: $182,166
  • 2005: $107,835
  • 2004: $87,723

Pathirana, P, Rolfe, B and Wong, A. Nodal Power Saving for Disconnected Ad Hoc Sensor Networks , Australian Research Council Grant - Discovery Projects [T]

  • 2008: $90,133
  • 2007: $88,369
  • 2006: $81,520

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2006: $63,885
  • 2005: $62,693
  • 2004: $61,404

Research Income - Industry and Other Funding

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V]

  • 2013: $25,000
  • 2012: $5,000

Rolfe, B, Hodgson, P, Forsyth, M, Xiang, Y, Doolan, M* and Pereira, M. Developing an environmentally friendly, low cost solution to reduce wear and improve productivity in metal forming [V]

  • 2013: $183,000

Rolfe, B and Weiss, M. URP 2012-4089R Flexible roll forming of automotive structures [V]

  • 2013: $42,070

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products [V]

  • 2011: $20,000

Research Income - Industry and Other Funding - Australian

Hodgson, P, Rolfe, B, Yan, W*, Okonkwo, P and Kelly, G. Reducing tool wear through novel surface treatments and improved lubrication [V.1]

  • 2010: $15,000
  • 2009: $15,000
  • 2008: $15,000

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products [V.1]

  • 2010: $30,000
  • 2009: $30,000

Rolfe, B and Fox, B. The development of numerical modelling techniques for geometrically complex composite components [V.1]

  • 2010: $3,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2009: $18,980
  • 2008: $25,872
  • 2007: $95,761
  • 2006: $77,880
  • 2005: $73,786

Rolfe, B. Extending the multi-scale capabilities of Xanthus [V.1]

  • 2007: $12,000

Barnett, M and Rolfe, B. A multi-scale model of plasticity for magnesium alloys [V.1]

  • 2006: $5,000

Rolfe, B. Multi-scale modelling of Martensitic Transformation in Steel by enhancing StGermain [V.1]

  • 2006: $18,750

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V.3]

  • 2013: $35,000
  • 2012: $35,000

Hodgson, P, Kong, L, Barnett, M and Rolfe, B. Cold Stamping of Advanced High Strength Steels [V.3]

  • 2013: $50,000
  • 2012: $50,000

Research Income - Other Funding Sources

Rolfe, B, Magniez, K, Magniez, K, Hilditch, T and de Souza, T. 3-101 Pickup Canopy Development, AutoCRC Ltd [X]

  • 2013: $149,617
  • 2012: $0

Rolfe, B, Weiss, M and Pereira, M. Tool Wear Prediction Model on the Stamping of AHSS and UHSS, AutoCRC Ltd [X]

  • 2013: $15,492

Rolfe, B and Weiss, M. 3-105 Flexible Roll Forming of a Component Section from AHSS, AutoCRC Ltd [X]

  • 2013: $30,583

Dingle, M, Hilditch, T, Rolfe, B, Will, F, Balasingh Sugirtharaj, P, Lenz, S and Fiedler, K. Development of a lightweight modular mixed material vehicle platform - C2-23, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2012: $255,555
  • 2011: $178,449
  • 2010: $122,815

Rolfe, B and Kong, L. Lightweight Vehicle Structures, C1-802, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2012: $222,326
  • 2011: $63,750
  • 2010: $0

Higher Degree by Research Completions supervised by Bernard Rolfe

2013

Paul Okonkwo
Doctor of Philosophy, Thesis entitled: Effects of Temperature and Speed on the Wear of Steel.
Institute for Frontier Materials Requires an Internet connection

2010

Timothy De Souza
Doctor of Philosophy, Thesis entitled: Analysis of Springback Variation in Sheet Metal Forming.
Institute for Frontier Materials Requires an Internet connection

Michael Pereira
Doctor of Philosophy, Thesis entitled: Tool Wear Analysis in Sheet Metal Stamping.
Institute for Frontier Materials Requires an Internet connection

Reza Rafiee
Master of Engineering, Thesis entitled: Modelling of Tooling Wear in Trim Dies for AHSS .
Institute for Frontier Materials Requires an Internet connection

2008

Fabian D’Souza
Master of Engineering, Thesis entitled: "Improving Stamping Tryout using Variational Analysis, FE Simulations and Robustness". Centre for Material and Fibre Innovation

2007

Alison Warrior
Master of Engineering, Thesis entitled: Structured Methodology for Evaluating Stamping Feasibility of New Part Design. Centre for Material and Fibre Innovation

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Sunday 21st December 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011