Research Services Division

Deakin Research

Research Output for Adam Stuart Taylor

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2013 Institute for Frontier Materials

Beladi, Hossein, Cizek, Pavel, Taylor, Adam S. and Hodgson, Peter D. (2013) Effect of substructure characteristics on the dislocation annihilation process during post-deformation annealing, Materials science forum, vol. 753, pp. 76-79, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Cizek, Pavel, Beladi, Hossein, Taylor, Adam S. and Hodgson, Peter D. (2013) Orientation dependence of the substructure characteristics in a Ni- 30%Fe austenitic alloy deformed in hot torsion, Materials science forum, vol. 753, pp. 54-57, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Fabijanic, D., Taylor, A., Ralston, K.D.*, Zhang, M.X.* and Birbilis, N.* (2013) Influence of surface mechanical attrition treatment attrition media on the surface contamination and corrosion of magnesium, Corrosion, vol. 69, no. 6, pp. 527-535, NACE International, Houston, Tex. [C1]
ERA journal ID: 3734 – Scopus EID: 2-s2.0-84879762533
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Taylor, A.S. and Hodgson, P.D. (2013) Recrystallization of 304SS during and after high strain rate deformation, Materials science forum, vol. 753, pp. 403-406, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Taylor, A.S., Weiss, M., Hilditch, T., Hodgson, P.D. and Stanford, N. (2013) Cryo-rolling and formability of 2024 aluminium, Materials science forum, vol. 765, pp. 434-438, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Weiss, M., Taylor, A.S., Hodgson, P.D. and Stanford, N. (2013) Strength and biaxial formability of cryo-rolled 2024 aluminium subject to concurrent recovery and precipitation, Acta materialia, vol. 61, no. 14, pp. 5278-5289, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84879035049
Citation counts: Thomson - 1
DRO entry for this publication

2012 Institute for Frontier Materials

Hodgson, P. D., Cizek, P., Taylor, A. S. and Beladi, H. (2012) Texture evolution and softening processes in an austenitic Ni-30Fe alloy subjected to hot deformation and subsequent annealing, Materials science forum, vol. 702-703, pp. 435-438, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hodgson, P. D., Cizek, P., Beladi, H. and Taylor, A. (2012) Microstructure evolution and softening processes occurring during annealing of hot deformed Ni-30Fe austenite, Materials science forum, vol. 706-709, pp. 2134-2139, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Stanford, N., Taylor, A. S., Cizek, P., Siska, F., Ramajayam, M. and Barnett, M. R. (2012) {1012} Twinning in magnesium-based lamellar microstructures, Scripta materialia, vol. 67, no. 7-8, pp. 704-707, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84865518002
Citation counts: Scopus - 6
DRO entry for this publication

Taylor, A. S., Cizek, P. and Hodgson, P. D. (2012) Orientation dependence of the substructure characteristics in a Ni-30Fe austenitic model alloy deformed in hot plane strain compression, Acta materialia, vol. 60, no. 4, pp. 1548-1569, Elsevier, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84856183593
Citation counts: Scopus - 11, Thomson - 11
DRO entry for this publication

Taylor, A. S., Weiss, M., Hilditch, T., Stanford, N. and Hodgson, P. D. (2012) Formability of cryo-rolled aluminium in uniaxial and biaxial tension, Materials science and engineering A, vol. 555, pp. 148-153, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84864538037
Citation counts: Scopus - 6
DRO entry for this publication

2011 Institute for Frontier Materials

Taylor, A. S. and Hodgson, P. D. (2011) The post-deformation recrystallization behaviour of 304 stainless steel following high strain rate deformation, Materials science and engineering A, vol. 529, no. 1, pp. 164-169, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-80054079073
Citation counts: Scopus - 4
DRO entry for this publication

Taylor, A. S., Cizek, P. and Hodgson, P. D. (2011) Comparison of 304 stainless steel and Ni-30 wt.% Fe as potential model alloys to study the behaviour of austenite during thermomechanical processing, Acta materialia, vol. 59, no. 14, pp. 5832-5844, Elsevier BV, Oxford, U. K. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-79960431251
Citation counts: Scopus - 6, Thomson - 6
DRO entry for this publication

Taylor, A.S. and Hodgson, P.D. (2011) Dynamic behaviour of 304 stainless steel during high Z deformation, Materials Science and Engineering A, vol. 528, no. 9, pp. 3310-3320, Elsevier S.A., Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79951674039
Citation counts: Scopus - 20, Thomson - 17
DRO entry for this publication

Grants and Consultancies

No grants and/or consultancies found or audited – the 2014 HERDC financial return has not been completed or loaded as yet.

Higher Degree by Research Completions supervised by Adam Stuart Taylor

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Sunday 21st December 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011