Research Services Division

Deakin Research

Research Output for Matthias Weiss

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

2014 Institute for Frontier Materials

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) An experimental investigation of edge strain and bow in roll forming a V-section, Materials science forum, vol. 773-774, pp. 153-159, Trans Tech Publications, Durnten-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Sensitivity analysis of roll load, torque and material properties in the roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 900-903, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Effect of temper rolling on final shape defects in a V-section roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 896-899, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) The effect of forming strategy on the longitudinal bow in roll forming of advanced high strength steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 876-879, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation about the effect of increasing the number of forming passes on the quality of AHSS roll formed products, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 872-875, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation on the effect of skin passing and roller leveling on the bending behaviour of mild steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 452-455, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Mendiguren, Joseba*, Hanselmanb, Stijn*, Atzemac, Eisso*, Hodgson, Peter, Rolfe, Bernard and Weiss, Matthias (2014) Characterization of a dual phase steel using tensile and free bending tests, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 659-662, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

2013 Institute for Frontier Materials

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter D. and Weiss, Matthias (2013) Development of an inverse routine to predict residual stresses in the material based on a bending test, Key engineering materials, vol. 554-557, pp. 949-956, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84880550088
DRO entry for this publication

Tafti, Roohollah Azizi*, Naeini, Hassan Moslemi*, Tehrani, Mehdi Salmani*, Rolfe, Bernard and Weiss, Matthias (2013) Theoretical extension of elastic-perfectly plastic deformation length in roll forming of a channel section, International journal of materials and product technology, vol. 47, no. 1/2/3/4, pp. 33-45, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893922690
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Experimental study into the correlation between the incremental forming and the nature of springback in automotive steels, International journal of materials and product technology, vol. 47, no. 1/2/3/4, pp. 150-161, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893952933
DRO entry for this publication

Pereira, Michael P., Weiss, Matthias, Rolfe, Bernard F. and Hilditch, Tim B. (2013) The effect of the die radius profile accuracy on wear in sheet metal stamping, International journal of machine tools and manufacture, vol. 66, pp. 44-53, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3606 – Scopus EID: 2-s2.0-84871738769
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Taylor, A.S., Weiss, M., Hilditch, T., Hodgson, P.D. and Stanford, N. (2013) Cryo-rolling and formability of 2024 aluminium, Materials science forum, vol. 765, pp. 434-438, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Weiss, M., Taylor, A.S., Hodgson, P.D. and Stanford, N. (2013) Strength and biaxial formability of cryo-rolled 2024 aluminium subject to concurrent recovery and precipitation, Acta materialia, vol. 61, no. 14, pp. 5278-5289, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84879035049
Citation counts: Thomson - 1
DRO entry for this publication

Wiebenga, J.H.*, Weiss, M., Rolfe, B. and Van Den Boogaard, A.H.* (2013) Product defect compensation by robust optimization of a cold roll forming process, Journal of materials processing technology, vol. 213, no. 6, pp. 978-986, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84873978941
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) A first step towards in-line shape compensation for roll forming applications, in unknown (ed.), IDDRG 2013 : Proceedings of the 2013 International Deep-Drawing Research Group annual conference, pp. 93-97, IDDRG, Zurich, Switzerland [E1]
DRO entry for this publication

Badr, Ossama Mamdouh, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) The numerical investigation of the material behavior of high strength sheet materials in incremental forming, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMIFORM 2013 : Proceedings of Numerical Methods in Industrial Forming Processes 2013 international conference, pp. 513-519, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Pan, Libo*, Rolfe, Bernard, Asgari, Alireza, Weiss, Matthias and Zhang, Zhijian* (2013) Investigation on forming limit properties of dual phase steel, in Unknown (ed.), NUMIFORM 2013 : Proceedings of the 11th International Conference on Numerical Methods in Industrial Forming Processes, pp. 850-856, AIP Publishing, Melville, N.Y. [E1]
DRO entry for this publication

Jiao, Jingsi, Rolfe, Bernard, Mendiguren, Joseba*, Galdos, Lander* and Weiss, Matthias (2013) The effect of process parameters on web-warping in the flexible roll forming of UHSS, in Unknown (ed.), TTP 2013: Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference, pp. 1-10, The Conference, Graz, Austria [E2]
DRO entry for this publication

Pereira, Michael P., Weiss, Matthias and Rolfe, Bernard F. (2013) Towards tool life precition in sheet metal stamping, in Unknown (ed.), TTP 2013 : Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference, pp. 1-10, The Conference, Graz, Austria [E2]
DRO entry for this publication

Badr, Ossama Mamdouth, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Manufacturing structural components made of Ti-6AI-4V at room temperature, in Unknown (ed.), AeroMat 2013 : Proceedings of the 24th Advanced Aerospace Materials and Processes Conference and Exposition, p. 1, AeroMat, Bellevue, Washj. [E3]
DRO entry for this publication

Weiss, Matthias, Cai, Minghui, Hodgson, Peter and Kupke, Andreas (2013) The effect of microstructure on the decrease of the apparent Young's Modulus in DP 780 steel, in Unknown (ed.), Proceedings of the 2013 International Symposium on New Developments in Advanced High Strength Sheet Steels, pp. 6-7, AIST, Vail, Colo. [E3]
DRO entry for this publication

2012 Institute for Frontier Materials

Moy, Charles K. S.*, Weiss, Matthias, Xia, Junhai*, Sha, Gang*, Ringer, Simon P.* and Ranzi, Gianluca* (2012) Influence of heat treatment on the microstructure, texture and formability of 2024 aluminium alloy, Materials science and engineering A, vol. 552, pp. 48-60, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84863006560
Citation counts: Scopus - 13
DRO entry for this publication

Taylor, A. S., Weiss, M., Hilditch, T., Stanford, N. and Hodgson, P. D. (2012) Formability of cryo-rolled aluminium in uniaxial and biaxial tension, Materials science and engineering A, vol. 555, pp. 148-153, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84864538037
Citation counts: Scopus - 6
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Hodgson, Peter D. and Yang, Chunhui (2012) Effect of residual stress on the bending of aluminium, Journal of materials processing technology, vol. 212, no. 4, pp. 877-883, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84856000610
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Weiss, Matthias, Marnette, Jascha, Wolfram, Preston*, Larranaga, Jon* and Hodgson, Peter (2012) Comparison of bending of automotive steels in roll forming and in a V-die, Key engineering materials, vol. 504-506, pp. 797-802, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84857188464
Citation counts: Scopus - 2
DRO entry for this publication

Marnette, Jascha, Weiss, Matthias and Hodgson, Peter (2012) Roll forming cryo-rolled nano-structured aluminium sheet, in Unknown (ed.), AMPT 2012 : Proceedings of the 15th Advances in Materials & Processing Technologies Conference, pp. 1-5, University of Wollongong, Wollongong, N.S.W. [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2012) Effect of roller leveling on the bending behaviour of aged steel strip, in Mori, K.; Pietrzyk, M.; Kusiak, J.; Majta, J.; Hartley, P. and Lin, J. (eds), Metal Forming 2012 : Proceedings of the 14th International Conference on Metal Forming, pp. 699-702, Wiley-VCH, Krakow, Poland [E1]
DRO entry for this publication

Weiss, M, Abeyrathna, B., Marnette, J., Badr, O., Abvabi, A., Jiao, J. and Hodgson, P. (2012) Approach for testing the material behavior in roll forming in a small scale, in Unknown (ed.), IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, pp. 1-6, International Deep-Drawing Research Group, Mumbai, India [E1]
DRO entry for this publication

Weiss, Matthias, Kupke, Andreas and Rolfe, Bernard (2012) Effect of tensile pre-strain on bending and unloading of automotive steels, in Unknown (ed.), IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, pp. 409-415, International Deep-Drawing Research Group, Mumbai, India [E1.1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Larranaga, Jon*, Glados, Lander*, Yang, Chunhui* and Weiss, Matthias (2012) Using the solid-shell element to model the roll forming of large radii profiles, in Unknown (ed.), Steel Research Journal : Proceedings of the 14th International Conference on Metal Forming, pp. 711-714, Wiley, London, England [E2.1]
DRO entry for this publication

2011 Institute for Frontier Materials

Hemmerich, E., Rolfe, B., Hodgson, P. D. and Weiss, M. (2011) The effect of pre-strain on the material behaviour and the Bauschinger effect in the bending of hot rolled and aged steel, Materials science and engineering a, vol. 528, no. 9, pp. 3302-3309, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79951682388
Citation counts: Scopus - 7
DRO entry for this publication

Nikhare, C., Hodgson, P. D. and Weiss, M. (2011) Necking and fracture of advanced high strength steels, Materials science and engineering a, vol. 528, no. 6, pp. 3010-3013, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79151482016
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Weiss, M., Hemmerich, E.*, Hodgson, P. D. and Rolfe, B. (2011) Effect of thermal treatment on the bending properties of pre-strained carbon steel, Materials science and engineering A, vol. 528, no. 13-14, pp. 4528-4536, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79953289595
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Yang, Chunhui, De Souza, Tim and Hodgson, Peter (2011) Review of approximate analyses of sheet forming processes, in Unknown (ed.), NUMISHEET 2011 : American Institute of Physics Conference Proceedings, pp. 986-996, American Institute of Physics, Seoul, Korea [E2]
DRO entry for this publication

2010 Institute for Frontier Materials

Nikhare, Chetan, Asgari, Alireza, Weiss, Matthias and Hodgson, Peter D. (2010) Fracture of DP590 steel : a multi-scale modeling approach, Steel research international, vol. 81, no. 9, pp. 1450-1453, Wiley – VCH Verlag, Weinheim, Germany [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nikhare, Chetan, Weiss, Matthias and Hodgson, Peter D. (2010) Die closing force in low pressure tube hydroforming, Journal of materials processing technology, vol. 210, no. 15, pp. 2238-2244, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-77957653238
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Supasuthakul, Jeerachai, Hodgson, Peter D., Weiss, Matthias and Yang, Chunhui (2010) Analytical solutions and finite element modelling of deep drawing process for cylindrical metal cups, Key engineering materials, vol. 443, pp. 104-109, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-77955444923
Citation counts: Scopus - 1
DRO entry for this publication

Weiss, Matthias, Ryan, Will, Rolfe, Bernard and Yang, Chunhui (2010) The effect of skin passing on the material behavior of metal strip in pure bending and tension, in Barlat, Frederic; Moon, Young Hoon and Lee, Myoung-Gyu (eds), NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, pp. 896-902, American Institute of Physics (API), Danvers, Ma. [E1]
DRO entry for this publication

2009 Institute for Frontier Materials

Nikhare, C., Weiss, M. and Hodgson, P.D. (2009) FEA comparison of high and low pressure tube hydroforming of TRIP steel, Computational materials science, vol. 47, no. 1, pp. 146-152, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-70350566540
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Nikhare, C., Weiss, M. and Hodgson, P. D. (2009) Crash investigation of side intrusion beam during high and low pressure tube hydroforming, in Unknown (ed.), TUBEHYDRO 2009 : Proceedings of the 2009 International Conference of Tube Hydroforming conference, pp. 107-112, TUBEHYDRO, Kaohsiung, Taiwan [E1]
DRO entry for this publication

Nikhare, C., Weiss, M. and Hodgson, P. D. (2009) An investigation of complex shapes during low pressure tube hydroforming, in Levy, B. S.; Matlock, D. K. and Van Tyne, C. J. (eds), IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the 2009 International Deep-Drawing Research Group annual conference, pp. 879-888, IDDRG, Golden, Colo. [E1]
DRO entry for this publication

Weiss, Matthias, Pereira, Michael, Rolfe, B. F. and Hilditch, Tim (2009) Wear mechanisms in forming of HSS and AHSS, in Levy, B.S.; Matlock, D.K. and Van Tyne, C.J. (eds), IDDRG 2009 : Material property data for more effective numerical analysis : Proceedings of the International Deep-Drawing Research Group 2009 annual conference, pp. 691-702, IDDRG, Golden, Colo. [E1.1]
DRO entry for this publication

Nikhare, C., Asgari, A., Weiss, M. and Hodgson, P. D. (2009) Multi-scale modelling of DP590 steel, SMF 2009 : Proceedings of the 2009 National Conference on Sheet Metal Forming, pp. 249-256, Sheet Metal Forming, Mumbai, India [E2]
DRO entry for this publication

2008 Centre for Material and Fibre Innovation

Nikhare, C., Marcondes, P. V.*, Weiss, M. and Hodgson, P. D. (2008) Experimental and numerical evaluation of forming and fracture behaviour of high strength steel, in Perez, Teresa (eds), TMS 2008 : New Developments on Metallurgy and Applications of High Strength Steels: Steel Conference, pp. 1-13, The Minerals, Metals & Materials Society (TMS), Buenos Aires, Argentina [E1]
DRO entry for this publication

Nikhare, C., Weiss, M. and Hodgson, P. D. (2008) Numerical investigation of high and low pressure tube hydroforming, in Hora, Pavel (eds), NUMISHEET 2008 : Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 691-696, Institute of Virtual Manufacturing, Zurich, Switzerland [E1]
DRO entry for this publication

Nikhare, Chetan P., Weiss, Matthias and Hodgson, Peter D. (2008) Experimental and numerical investigation of low pressure tube hydroforming on 409 stainless steel, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal Forming 2008 : Proceedings of the 12th International Conference on Metal Forming, pp. 272-279, Verlag Stahleisen GmbH, Duesseldorf, Germany [E1]
DRO entry for this publication

2007 Centre for Material and Fibre Innovation

Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2007) The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming, Journal of engineering materials and technology, vol. 129, no. 4, pp. 530-537, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 3776 – Scopus EID: 2-s2.0-36049019926
Citation counts: Scopus - 10, Thomson - 7
DRO entry for this publication

2006 Centre for Material and Fibre Innovation

Weiss, Matthias, Rolfe, Bernard, Dingle, Matthew. and Duncan, J.* (2006) Elastic bending of steel-polymer-steel (SPS) laminates to a constant curvature, Journal of applied mechanics., vol. 73, no. 4, pp. 574-579, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 5140 – Scopus EID: 2-s2.0-33749540139
Citation counts: Scopus - 8, Thomson - 2
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard and Hodgson, Peter (2006) The influence of temperature on the springback behavior of metal/polymer-laminates, in Santos, Abel D. and Rocha, Barata da (eds), Drawing the things to come : trends and advances in sheet metal forming ; IDDRG International Deep Drawing Research Group 2006 conference ; June 19 - 21, 2006, Porto, Portugal ; proceedings, pp. 199-206, Instituto de Engenharia Mecânica e Gestô Industrial, Leça do Balio, Portugal [E2]
DRO entry for this publication

2005 School of Engineering

Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2005) The influence of temperature on the formability of metal/polymer/metal-laminates, in Boudeau, N. (eds), IDDRG 2005 : Proceedings of the 24th International Deep-Drawing Research Group Congress, International Deep-Drawing Research Group, Besançon, France [E2]
DRO entry for this publication

2004 School of Engineering

Weiss, Matthias, Rolfe, Bernard F., Dingle, Matthew E. and Hodgson, Peter (2004) The influence of interlayer thickness and properties on spring-back of SPS- (steel/polymer/steel) laminates., Steel grips, vol. 2, no. Supplement, pp. 445-449, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not tagged
DRO entry for this publication

Grants and Consultancies

All years

Research Income - Industry and Other Funding

Rolfe, B and Weiss, M. URP 2012-4089R Flexible roll forming of automotive structures [V]

  • 2013: $42,070

Research Income - Other Funding Sources

Weiss, M, Rolfe, B and Pereira, M. Tool Wear Prediction Model on the Stamping of AHSS and UHSS, AutoCRC Ltd [X]

  • 2013: $15,492

Rolfe, B and Weiss, M. 3-105 Flexible Roll Forming of a Component Section from AHSS, AutoCRC Ltd [X]

  • 2013: $30,583

Yan, W*, Yan, W, Weiss, M and Hu, E. Auto CRC Mini Project UG5106, UG4706, UG1706, UG1906, UG2906, UG3006 plus UG5409 and UG 5509 (2009), CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2011: $10,722
  • 2010: $9,584
  • 2009: $8,000
  • 2008: $7,433

Higher Degree by Research Completions supervised by Matthias Weiss

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Tuesday 25th November 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

23rd July 2011