Research Services Division

Deakin Research

2014 Institute for Frontier Materials Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) An experimental investigation of edge strain and bow in roll forming a V-section, Materials science forum, vol. 773-774, pp. 153-159, Trans Tech Publications, Durnten-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Abolhasani, Mohammad Mahdi*, Naebe, Minoo, Jalali-Arani, Azam* and Guo, Qipeng (2014) Influence of miscibility phenomenon on crystalline polymorph transition in poly(vinylidene fluoride)/ acrylic rubber/clay nanocomposite hybrid, PLOS one, vol. 9, no. 2, pp. 1-8, Public Library of Science, San Francisco, Ca. [C1]
ERA journal ID: 39745 – Scopus EID: Not tagged
DRO entry for this publication

Abolhasani, Mohammad Mahdi*, Naebe, Minoo and Guo, Qipeng (2014) A new approach for mechanisms of ferroelectric crystalline phase formation in PVDF nanocomposites, Physical chemistry chemical physics, vol. 16, no. 22, pp. 1-9, R S C Publications, Cambridge, England [C1]
ERA journal ID: 1219 – Scopus EID: 2-s2.0-84900828282
DRO entry for this publication

Abraham, Theodore J.*, Tachikawa, Naoki*, MacFarlane, Douglas R.* and Pringle, Jennifer M. (2014) Investigation of the kinetic and mass transport limitations in thermoelectrochemical cells with different electrode materials, Physical chemistry chemical physics, vol. 16, no. 6, pp. 2527-2532, Royal Society of Chemistry, Cambridge, England [C1]
ERA journal ID: 1219 – Scopus EID: 2-s2.0-84892568251
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Bagherzadeh, Roohollah*, Latifi, Masoud*, Najir, Shaikhzadeh Saeed*, Tehran, Mohammad Amani* and Kong, Lingxue (2014) The application of Cd Se/ZnS quantum dots and confocal laser scanning microscopy for three-dimensional imaging of nanfibrous structures, Journal of industrial textiles, vol. 43, no. 4, pp. 496-510, Sage Publications, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 1
DRO entry for this publication

Bagherzadeh, Roohollah*, Latifi, Masoud*, Najar, Saeed Shaikhzadeh* and Kong, Lingxue (2014) Experimental verification of theoretical prediction of fiber to fiber contacts in electrospun multilayer nano-microfibrous assemblies: effect of fiber diameter and network porosity, Journal of industrial textiles, vol. 43, no. 4, pp. 483-495, Sage Publications, London, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Bagherzadeh, Roohollah, Latifi, Masoud* and Kong, Lingxue (2014) Three-dimensional pore structure analysis of polycaprolactone nano-microfibrous scaffolds using theoretical and experimental approaches, Journal of biomedical materials research - Part A, vol. 102, no. 3, pp. 903-910, Wiley, London, England [C1]
ERA journal ID: 5052 – Scopus EID: 2-s2.0-84882552917
DRO entry for this publication

Beladi, Hossein, Rohrer, Gregory S.*, Rollett, Anthony D.*, Tari, Vahid* and Hodgson, Peter D. (2014) The distribution of intervariant crystallographic planes in a lath martensite using five macroscopic parameters, Acta materialia, vol. 63, pp. 86-98, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-84886815210
DRO entry for this publication

Byrne, Nolene, Leblais, Alexis and Fox, Bronwyn (2014) Preparation of polyacrylonitrile–natural polymer composite precursors for carbon fiber using ionic liquid co solvent solutions, Journal of materials chemistry A, vol. 2, no. 10, pp. 3424-3429, Royal Society of Chemistry, London, Eng. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Catubig, Rainier, Hughes, A. E.*, Cole, I. S.*, Hinton, Bruce and Forsyth, Maria (2014) The use of cerium and praseodymium mercaptoacetate as thiol-containing inhibitors for AA2024-T3, Corrosion science, vol. 81, pp. 45-53, Pergamon, Oxford, England [C1]
ERA journal ID: 4761 – Scopus EID: 2-s2.0-84892961674
Citation counts: Scopus - 1
DRO entry for this publication

Chen, Jing-Yu, Chen, Xiao-Bo*, Li, Jing-Liang*, Tang, Bin, Birbilis, Nick* and Wang, Xungai (2014) Electrosprayed PLGA smart containers for active anti-corrosion coating on magnesium alloy Amlite, Journal of materials chemistry A, vol. 2, no. 16, pp. 5738-5743, Royal Society of Chemistry, London, Eng. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Chen, Zhiqiang, Dai, Xiujuan J., Magniez, Kevin, Lamb, Peter R., Fox, Bronwyn L. and Wang, Xungai (2014) Improving the mechanical properties of multiwalled carbon nanotube/epoxy nanocomposites using polymerization in a stirring plasma system, Composites part A : applied science and manufacturing, vol. 56, pp. 172-180, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-84887053424
Citation counts: Scopus - 1
DRO entry for this publication

Cheng, Chun*, Amini, Abbas, Zhu, Chao*, Xu, Zuli*, Song, Haisheng* and Wang, Ning* (2014) Enhanced photocatalytic performance of TiO2-ZnO hybrid nanostructures, Scientific reports, vol. 4, no. 4181, pp. 1-5, Nature Publishing Group, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Forsyth, Maria, Chimdi, Tarekegn, Seeber, Aaron*, Gunzelmann, Daniel and Howlett, Patrick C. (2014) Structure and dynamics in an organic ionic plastic crystal, N-ethyl-N-methyl pyrrolidinium bis(trifluoromethanesulfonyl) amide, mixed with a sodium salt, Journal of materials chemistry A, vol. 2, no. 11, pp. 3993-4003, Royal Society of Chemistry, London, Eng. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Forsyth, Maria, Chimdi, Tarekegn, Seeber, Aaron*, Gunzelmann, Daniel and Howlett, Patrick C. (2014) Structure and dynamics in an organic ionic plastic crystal, N-ethyl-N-methyl pyrrolidinium bis(trifluoromethanesulfonyl) amide, mixed with a sodium salt, Journal of materials chemistry A, vol. 2, no. 11, pp. 3993-4003, R S C Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Greene, George Warren, Olszewska, Anna*, Osterberg, Monika*, Zhu, Haijin and Horn, Roger (2014) A cartilage-inspired lubrication system, Soft matter, vol. 10, no. 2, pp. 374-382, Royal Society of Chemistry, London, England [C1]
ERA journal ID: 30185 – Scopus EID: 2-s2.0-84890064671&partne
Citation counts: Thomson - 1
DRO entry for this publication

Han, Yu*, Pringle, Jennifer M. and Chen, Yi-Bing* (2014) Photovoltaic characteristics and stability of flexible dye-sensitized solar cells on ITO/PEN substrates, RSC advances, vol. 4, no. 3, pp. 1393-1400, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Hanid, Nurbaiti A.*, Wahit, Mat Uzir*, Guo, Qipeng, Mahmoodian, Shaya* and Soheilmoghaddam, Mohammad* (2014) Development of regenerated cellulose/halloysites nanocomposites via ionic liquids, Carbohydrate polymers, vol. 99, pp. 91-97, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1568 – Scopus EID: 2-s2.0-84883646791
Citation counts: Scopus - 1
DRO entry for this publication

Hu, Min*, Sun, Jiazeng*, Rong, Yaoguang*, Yang, Ying*, Liu, Linfeng*, Li, Xiong*, Forsyth, Maria, Macfarlane, Douglas R.* and Han, Hongwei* (2014) Enhancement of monobasal solid-state dye-sensitized solar cells with polymer electrolyte assembling imidazolium iodide-functionalized silica nanoparticles, Journal of power sources, vol. 248, pp. 283-288, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1470 – Scopus EID: 2-s2.0-84886802483
Citation counts: Scopus - 3
DRO entry for this publication

Hu, Xiaokai, Mayson, Dylan and Barnett, Matthew R. (2014) Synthesis of Mg2Si for thermoelectric applications using magnesium alloy and spark plasma sintering, Journal of alloys and compounds, vol. 589, pp. 485-490, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-84891618750
Citation counts: Scopus - 2
DRO entry for this publication

Peipei, Huang, Howlett, Patrick C. and Forsyth, Maria (2014) Electrochemical etching of AA5083 aluminium alloy in trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfonyl)amide ionic liquid, Corrosion science, vol. 80, no. 11, pp. 120-127, NACE International, Houston, Tex. [C1]
ERA journal ID: 4761 – Scopus EID: 2-s2.0-84891627546
DRO entry for this publication

Huson, Mickey G.*, Church, Jeffrey S.*, Kafi, Abdullah A., Woodhead, Andrea L.*, Khoo, Jiyi*, Kiran, M.S.R.N.*, Bradby, Jodie E.* and Fox, Bronwyn L. (2014) Heterogeneity of carbon fibre, Carbon, vol. 68, pp. 240-249, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1412 – Scopus EID: 2-s2.0-84887975146
DRO entry for this publication

Jiang, Wenlong*, Liu, Yu*, Wang, Jinfeng, Wang, Qitong*, Zhang, Yunhe* and Guan, Shaowei* (2014) Preparation and dielectric properties of sulfonated poly(aryl ether ketone)/acidified graphite nanosheet composites, Journal of applied polymer science, vol. 131, no. 6, pp. 1-8, John Wiley & Sons, Hoboken, N. J. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-84896549323
Citation counts: Scopus - 1
DRO entry for this publication

Jiao, Na*, Abraham, Theodore J.*, MacFarlane, Douglas R.* and Pringle, Jennifer M. (2014) Ionic liquid electrolytes for thermal energy harvesting using a cobalt redox couple, Journal of the electrochemical society, vol. 161, no. 7, pp. D3061-D3065, Electrochemical Society, Pennington, N. J. [C1]
ERA journal ID: 1476 – Scopus EID: Not tagged
DRO entry for this publication

Kaur, Jasjeet, Rajkhowa, Rangam, Afrin, Tarannum, Tsuzuki, Takuya and Wang, Xungai (2014) Facts and myths of antibacterial properties of silk, Biopolymers, vol. 101, no. 3, pp. 237-245, Wiley, London, England [C1]
ERA journal ID: 35097 – Scopus EID: 2-s2.0-84890747452
DRO entry for this publication

Kazum, O.*, Bobby, Kannan M.*, Beladi, H., Timokhina, I.B., Hodgson, P.D. and Khoddam, S.* (2014) Aqueous corrosion performance of nanostructured bainitic steel, Materials and design, vol. 54, pp. 67-71, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Khemchandani, Bhawna, Jaiswal, A. K.*, Sayanna, E.* and Forsyth, Maria (2014) Mixture of safflower oil and synthetic ester as a base stock for biodegradable lubricants, Lubrication science, vol. 26, no. 2, pp. 67-80, Wiley, London, England [C1]
ERA journal ID: 41145 – Scopus EID: 2-s2.0-84875658008
Citation counts: Thomson - 1
DRO entry for this publication

Kumar, Apurv, Hodgson, Peter, Gao, Weimin, Das, Subrat and Fabijanic, Dan (2014) Investigating the effect of segregation of particles and pressure gradient on the quality of fluidisation at sub-atmospheric pressures, Powder technology, vol. 254, pp. 137-149, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3918 – Scopus EID: 2-s2.0-84893106930
Citation counts: Scopus - 1
DRO entry for this publication

Li, Chengpeng, She, Mary and Kong, Lingxue (2014) Non-isothermal crystallization kinetics of polyvinyl alcohol-graphene oxide composites, Applied mechanics and materials, vol. 446 - 447, pp. 206-209, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 124777 – Scopus EID: Not tagged
DRO entry for this publication

Li, Chengpeng, She, Mary, She, Xiaodong, Dai, Jane and Kong, Lingxue (2014) Functionalization of polyvinyl alcohol hydrogels with graphene oxide for potential dye removal, Journal of applied polymer science, vol. 131, no. 3, pp. 1-8, Wiley, London, England [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-84883546137
DRO entry for this publication

Li, Runqing, Liu, Jingquan*, Li, Luhua, Wang, Hongbin, Weng, Ziqing, Lam, Simon K.H.*, Du, Aijun*, Chen, Ying, Barrow, Colin J. and Yang, Wenrong (2014) Non-covalent surface modification of boron nitride nanotubes for enhanced catalysis, Chemical communications, vol. 50, pp. 225-227, Royal Society of Chemistry, Cambridge, England [C1]
ERA journal ID: 1319 – Scopus EID: Not tagged
DRO entry for this publication

Lin, Jia, Shigdar, Sarah, Fang, Ding Zhi*, Xiang, Dognxi*, Wei, Ming Q.*, Danks, Andrew*, Kong, Lingxue, Li, Lianghong*, Qiao, Liang* and Duan, Wei (2014) Improved efficacy and reduced toxicity of doxorubicin encapsulated in sulfatide-containing nanoliposome in a glioma model, Plos One, vol. 9, no. 7, pp. 1-13, Public Library of Science, San Francisco, CA [C1]
ERA journal ID: 39745 – Scopus EID: 2-s2.0-84904968815
DRO entry for this publication

Liu, Boyin*, Fu, Jing*, Somers, Anthony, Muradoglu, Murat* and Ng, Tuck Wah* (2014) Scale-like cantilever cell traps, RSC advances, vol. 4, no. 6, pp. 2652-2660, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Liu, Wei*, Liu, Jun, Chen, Kunfeng*, Ji, Shaomin*, Wan, Yanling*, Zhou, Yichun*, Xue, Dongfeng*, Hodgson, Peter and Li, Yuncang (2014) Enhancing the electrochemical performance of the LiMn2O4 hollow microsphere cathode with a LiNi0.5Mn1.5O4 coated layer, Chemistry : a European journal, vol. 20, no. 3, pp. 824-830, Wiley, London, England [C1]
ERA journal ID: 1329 – Scopus EID: 2-s2.0-84889993439
Citation counts: Thomson - 5
DRO entry for this publication

MacFarlane, Douglas R.*, Tachikawa, Naoki*, Forsyth, Maria, Pringle, Jennifer M., Howlett, Patrick C., Elliott, Gloria D.*, Davis Jr., James H.*, Watanabe, Masayoshi*, Patrice, Simon* and Angell, C. Austen* (2014) Energy applications of ionic liquids, Energy and environmental science, vol. 7, no. 1, pp. 232-250, Royal Society of Chemistry, London, England [C1]
ERA journal ID: 40780 – Scopus EID: 2-s2.0-84888591110
Citation counts: Scopus - 30, Thomson - 22
DRO entry for this publication

McGregor, BA (2014) Variation in the softness and fibre curvature of cashmere, alpaca, mohair and other rare animal fibres, Journal of the Textile Institute, vol. 105, no. 6, pp. 597-608, Taylor & Francis, London, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-84883878967
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Mehmood, Tariq, Kaynak, Akif, Dai, Xiujuan J., Kouzani, Abbas, Magniez, Kevin, Rubin de Celis, David, Hurren, Christopher J. and du, Plessis Johan* (2014) Study of oxygen plasma pre-treatment of polyester fabric for improved polypyrrole adhesion, Materials chemistry and physics, vol. 143, no. 2, pp. 668-675, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4965 – Scopus EID: 2-s2.0-84885346138
Citation counts: Thomson - 2
DRO entry for this publication

Muscat, Delina*, Tobin, Mark J.*, Guo, Qipeng and Adhikari, Benu* (2014) Understanding the distribution of natural wax in starch-wax films using synchrotron-based FTIR (S-FTIR), Carbohydrate polymers, vol. 102, pp. 125-135, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1568 – Scopus EID: 2-s2.0-84890394756
Citation counts: Scopus - 2
DRO entry for this publication

Naebe, Minoo, Wang, Jing, Amini, Abbas*, Khayyam, Hamid, Hameed, Nishar, Li, Lu Hua, Chen, Ying and Fox, Bronwyn (2014) Mechanical property and structure of covalent functionalised graphene / epoxy nanocomposites, Scientific reports, vol. 4, pp. 1-7, Nature Publishing Group, London, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Noor, Siti Aminah Mohd*, Gunzelmann, Daniel, Sun, Jiazeng, MacFarlane, Douglas R.* and Forsyth, Maria (2014) Ion conduction and phase morphology in sulfonate copolymer ionomers based on ionic liquid–sodium cation mixtures, Journal of materials chemistry A, vol. 2, no. 2, pp. 365-374, Royal Society of Chemistry, London, Eng. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Pozo-Gonzalo, Cristina, Virgilio, Christophe*, Yan, Yajing, Howlett, Patrick C., Byrne, Nolene, Macfarlane, Douglas R.* and Forsyth, Maria (2014) Enhanced performance of phosphonium based ionic liquids towards 4 electrons oxygen reduction reaction upon addition of a weak proton source, Electrochemistry communications, vol. 38, pp. 24-27, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1628 – Scopus EID: 2-s2.0-84887790478
Citation counts: Scopus - 2
DRO entry for this publication

Rahman, Md Mokhlesur, Glushenkov, Alexey M, Ramireddy, Thrinathreddy* and Chen, Ying (2014) Electrochemical investigation of sodium reactivity with nanostructured Co3O4 for sodium-ion batteries, Chemical communications, vol. 50, no. 39, pp. 5057-5060, Royal Society of Chemistry, London, England [C1]
ERA journal ID: 1319 – Scopus EID: Not tagged
DRO entry for this publication

Ramireddy, Thrinathreddy*, Rahman, Md Mokhlesur, Xing, Tan, Chen, Ying and Glushenkov, Alexey M (2014) Stable anode performance of an Sb–carbon nanocomposite in lithium-ion batteries and the effect of ball milling mode in the course of its preparation, Journal of Materials Chemistry A, vol. 2, no. 12, pp. 4282-4291, Royal Society of Chemistry, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Simons, T.J., Bayley, P.M., Zhang, Z.*, Howlett, P. C., MacFarlane, D. R.*, Madsen, L. A.* and Forsyth, M. (2014) Influence of Zn2+ and water on the transport properties of a pyrrolidinium dicyanamide ionic liquid, Journal of physical chemistry part B, vol. 118, no. 18, pp. 4895-4905, American Chemical Society, Washington, D. C. [C1]
ERA journal ID: 1467 – Scopus EID: 2-s2.0-84900305873
DRO entry for this publication

Singh, Charanpreet and Wang, Xungai (2014) A biomimetic approach for designing stent-graft structures : caterpillar cuticle as design model, Journal of the mechanical behavior of biomedical materials, vol. 30, pp. 16-29, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 44865 – Scopus EID: 2-s2.0-84887374319
DRO entry for this publication

Wang, Jinfeng, Tsuzuki, Takuya, Tang, Bin, Sun, Lu, Dai, Xiujuan J., Rajmohan, Gayathri D., Li, Jingliang and Wang, Xungai (2014) Recyclable textiles functionalized with reduced graphene Oxide@ZnO for removal of oil spills and dye pollutants, Australian journal of chemistry, vol. 67, pp. 71-77, CSIRO Publishing, Melbourne, Vic. [C1]
ERA journal ID: 1314 – Scopus EID: Not tagged
DRO entry for this publication

Wen, Ming, Wen, Cuie*, Hodgson, Peter and Li, Yuncang (2014) Fabrication of Ti-Nb-Ag alloy via powder metallurgy for biomedical applications, Materials and design, vol. 56, pp. 629-634, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-84890306761
Citation counts: Scopus - 1
DRO entry for this publication

Yang, Chunhui*, An, Yang, Tort, Marine* and Hodgson, Peter D. (2014) Fabrication, modelling and evaluation of microstructured materials in a digital framework, Computational materials science, vol. 81, pp. 89-97, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-84888295725
DRO entry for this publication

Zhang, Jin, Wang, Jinfeng, Lin, Tong, Wang, Chun H.*, Ghorbani, Kamran*, Fang, Jian and Wang, Xungai (2014) Magnetic and mechanical properties of polyvinyl alcohol (PVA) nanocomposites with hybrid nanofillers - graphene oxide tethered with magnetic Fe3O4 nanoparticles, Chemical engineering journal, vol. 237, pp. 462-468, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3854 – Scopus EID: 2-s2.0-84887541643
Citation counts: Scopus - 2
DRO entry for this publication

Zhang, Kun*, Sunarso, Jaka, Pham, Gia Hung*, Wang, Shaobin* and Liu, Shaomin* (2014) External short circuit-assisted proton conducting ceramic membrane for H2 permeation, Ceramics international, vol. 40, no. 1, pp. 791-797, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4877 – Scopus EID: 2-s2.0-84879865917
DRO entry for this publication

Zhu, Haijin, Rana, Ali Usman*, Ranganathan, Vijayraghavan*, Jin, Liyu*, O’Dell, Luke A., MacFarlane, Douglas R.* and Forsyth, Maria (2014) Proton transport behaviour and molecular dynamics in the guanidinium triflate solid and its mixtures with triflic acid, Journal of materials chemistry A, vol. 2, no. 3, pp. 681-691, RSC Publications, Cambridge, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Lim, Yang Choon*, Kouzani, Abbas Z., Duan, Wei, Dai, Xiujuan J., Kaynak, Akif and Mair, Douglas* (2014) A surface-stress-based microcantilever aptasensor, IEEE transactions on biomedical circuits and systems, vol. 8, no. 1, pp. 15-24, IEEE, Piscataway, NJ [C2]
ERA journal ID: 41166 – Scopus EID: Not tagged
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Sensitivity analysis of roll load, torque and material properties in the roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 900-903, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Effect of temper rolling on final shape defects in a V-section roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 896-899, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation about the effect of increasing the number of forming passes on the quality of AHSS roll formed products, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 872-875, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) The effect of forming strategy on the longitudinal bow in roll forming of advanced high strength steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 876-879, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Jiao, Jingsi, Rolfe, Bernard, Mendiguren, Joseba* and Galdos, Lander* (2014) The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 892-895, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation on the effect of skin passing and roller leveling on the bending behaviour of mild steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 452-455, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Mendiguren, Joseba*, Hanselmanb, Stijn*, Atzemac, Eisso*, Hodgson, Peter, Rolfe, Bernard and Weiss, Matthias (2014) Characterization of a dual phase steel using tensile and free bending tests, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 659-662, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2014

Research Income - National Competitive Grants

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), AWI Grant - Research [T]

  • 2011: $7,940

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, ARC_DUAPAI2 ARC_Deakin University Australian Postgraduate Award Industry Second [T]

  • 2009: $25,364

Hodgson, P. Advanced products through multiscale microstructure engineering, ARC Fellowship - Discovery - Federation Fellowship [T]

  • 2009: $167,871

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2008: $25,364

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $13,334

Muddle, B*, Hodgson, P, Schaffer, G*, Ferry, M*, Ringer, S*, Xia, K*, Nie, J*, Davies, C*, Hutchinson, C*, Barnett, M, Dahle, A*, Caceres, C*, Hoffman, M*, Dunlop, G*, Couper, M*, Embury, J*, Loretto, M*, Humphries, F*, Arnberg, L*, Estrin, Y*, Fraser, H* and Brechet, Y*. Design in Light Metals, ARC Centre - Centres of Excellence [T]

  • 2013: $631,733
  • 2012: $497,330
  • 2011: $497,330
  • 2010: $378,436
  • 2009: $548,803

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness, ARC Collaborative - Linkage - Projects (Round 2) [T]

  • 2009: $36,297

Fox, B. Structure-property relationships in thermoset nanocomposites, AINSE Grant - Postgraduate Research Award [T]

  • 2009: $5,416

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface, ARC Collaborative - Linkage - Projects (Round 2) [T]

  • 2009: $122,098

Hodgson, P, Rolfe, B, Yan, W*, Kelly, G and Okonkwo, P. Reducing tool wear through novel surface treatments and improved lubrication, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry [T]

  • 2012: $13,611
  • 2010: $63,321
  • 2009: $148,643

Wen, C, Yan, W* and Nicholson, G*. Titanium Alloy Scaffolds for Osseointegration Implant Materials, ARC Grant - Discovery Projects [T]

  • 2009: $89,870

Timokhina, I, Hodgson, P and Timokhina, I*. A Microstructure Based Approach to Steel Design for Improved Crash Performance, ARC Grant - Discovery Projects [T]

  • 2010: $98,376
  • 2009: $118,333

Mai, Y* and Guo, Q. Nanostructure Design and Toughening of Novel Thermosets, ARC Grant - Discovery Projects [T]

  • 2011: $51,512
  • 2010: $75,060

Hodgson, P, Beynon, J*, Strezov, L*, Stanford, N, Dippenaar, R*, Sietsma, J* and Thijsse, B*. Development of new steel products by thin strip casting and direct thermomechanical processing, ARC Grant - Discovery Projects [T]

  • 2011: $177,720
  • 2010: $127,578
  • 2009: $164,147

Wang, X. Improving production efficiency, quality and value-adding of rare natural fibres, RIRDC Grant - Research [T]

  • 2011: $22,500
  • 2010: $177,638

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece, ARC Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2011: $52,742
  • 2010: $101,521
  • 2009: $97,240

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products, ARC Collaborative - Linkage - Projects (Round 2, APAI) [T]

  • 2011: $40,462
  • 2010: $79,668
  • 2009: $78,050

Wang, X. Selective sequestering of heavy metal and actinide ions by biopolymer powders derived from silk biopolymer powder derived from silk fibres, AINSE Grant - Postgraduate Research Award [T]

  • 2009: $7,181

Wang, X, Wang, L, Lin, T and Yu, H*. The Properties and Processing Performance of Ultrasonically Cleaned Wool Fibres, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2011: $105,782
  • 2010: $104,142
  • 2009: $102,025

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2011: $26,140
  • 2010: $26,140
  • 2009: $26,140

Hodgson, P. Metal Processes and Products for a Sustainable Future, ARC Fellowship - Australian Laureate Fellowship [T]

  • 2013: $444,420
  • 2012: $467,382
  • 2011: $450,066
  • 2010: $428,084
  • 2009: $217,039

Fang, J, Lin, T and Wang, X. Cleaning uranium from mining water by functional nanofibres, AINSE Awards [T]

  • 2010: $6,750

Wallace, G*, Forsyth, M and Pringle, J. ARC Centre of Excellence for Electromaterials Science, ARC Centre - Centres of Excellence, ARC Centre - Centres of Excellence [T]

  • 2011: $266,399

Horn, R. A new angle on the coalescence of drops, ARC Grant - Discovery Projects [T]

  • 2011: $82,946

Byrne, N. Polymerization of amyloid fibrils and electroactive hybrid nanowires using ionic liquids, ARC Fellowship - Discovery - Fellowship [T]

  • 2012: $113,056
  • 2011: $108,868
  • 2010: $107,179

Kong, L, Wang, X and Lin, T. Formation and characterisation of continuous electrospun nanofibre yarns, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2012: $107,672
  • 2011: $101,609

Wang, X, Tsuzuki, T, Tsuzuki, T*, Smith, S*, Smith, S* and Kaplan, D*. Protein Fibre Powders: Production, Characterisation and Applications, ARC Grant - Discovery Projects [T]

  • 2012: $172,275
  • 2011: $155,524
  • 2010: $142,905

Wallace, G*, Moulton, S*, Forsyth, M and Zhang, Y. Advanced materials for stents, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry [T]

  • 2012: $52,280
  • 2010: $26,140

Cookson, P and Smith, S*. Use of Radiotracer Proves to Study the Binding of Metal Ions to Wool Powders, AINSE Awards [T]

  • 2010: $2,400

Forsyth, M, MacFarlane, D*, Winther-Jensen, B*, Fiedler, D* and Howlett, P. Metal-air batteries with improved rate capability and safety for hearing applications, ARC Collaborative - Linkage - Projects, ARC_DUAPAI2 ARC_Deakin University Australian Postgraduate Award Industry Second, ARC_DUAPAI ARC_Deakin University Australian Postgraduate Award Industry [T]

  • 2011: $-153,112
  • 2010: $153,111

Forsyth, M, Efthimiadis, J and McClelland, S. Smart Materials for Corrosion Management, DEWHA - National Centre of Excellence in Desalination [T]

  • 2013: $216,000
  • 2012: $56,000

McGregor, B and Wang, X. Improving knowledge, fibre and textile quality and communication, RIRDC Grant - Research [T]

  • 2012: $20,000
  • 2011: $56,000

Forsyth, M. New Materials for a Sustainable Energy Future, ARC Fellowship - Australian Laureate Fellowship [T]

  • 2013: $534,326
  • 2012: $456,218
  • 2011: $210,000

Lefevre, C and Menzies, K. Characterisation of buffalo milk, cheese and yoghurt properties for a stronger buffalo industry, RIRDC Grant - Research [T]

  • 2012: $15,000

Wang, X, Rajkhowa, R, Marano, R* and Atlas, M*. Engineering a silk fibroin based ear drum with optimum acoustic properties, ARC Collaborative - Linkage - Projects (Round 2) [T]

  • 2013: $116,114
  • 2012: $108,120
  • 2011: $51,803

Wang, X. Development of low twist fine count yarns and fabrics from Australian Long Staple Upland cotton, CRDC Grant - Research [T]

  • 2013: $120,000
  • 2012: $-19,052
  • 2011: $180,000

Wang, X and Morsi, Y*. Advanced 3D Fibrous Structures for Vascular Graft Applications, ARC Collaborative - Linkage - Projects (Round 1) [T]

  • 2013: $25,248
  • 2012: $23,016
  • 2011: $20,866

Wang, H. Superhydrophobic Fabrics for Solar Desalination of Seawater, ARC Grant - Discovery Projects [T]

  • 2013: $90,992
  • 2012: $87,551
  • 2011: $87,355

Zhao, Y. Magnetic Manipulation of Liquid Droplets for Novel Channel-free Microfluidics and Microreactors, ARC Grant - Discovery Projects [T]

  • 2013: $93,183
  • 2012: $112,905
  • 2011: $86,340

Chen, Y and Duan, W*. Ultra-fine Boron Nitride nanotubes, ARC Grant - Discovery Projects [T]

  • 2013: $137,242
  • 2012: $126,580
  • 2011: $121,890

Lin, T and Liu, X. Directional Fluid-transfer in Thin Porous Materials with Imbalanced Wettability, ARC Grant - Discovery Projects [T]

  • 2013: $76,679
  • 2012: $73,838
  • 2011: $71,103

Barnett, M. Growing a multi-scale internal structure: new wrought metals for energy conservation , ARC Fellowships - Future Fellowships [T]

  • 2013: $221,818
  • 2012: $214,024
  • 2011: $307,999

Lin, T. Piezoelectric Nanofibre Membranes with Built-in p-n Junction: New Self-rectifying Piezoelectric Power Generators, ARC Fellowships - Future Fellowships [T]

  • 2013: $203,217
  • 2012: $98,298

Guo, Q, Hartley, P*, Hughes, T*, Hughes, T* and Martin, D*. Nanoporous Siloxane Membranes for Ultrasound Mediated Ophthalmic Drug Delivery, ARC Collaborative - Linkage - Projects (Round 2) [T]

  • 2013: $-41,539
  • 2012: $41,539

Wang, X and Hurren, C. Australian Ultrafine Wool Dehairing and Processing, ARC Collaborative - Linkage - Projects (Round 2) [T]

  • 2013: $97,059
  • 2012: $46,731

Wang, X and Byrne, N. , AWI Grant - Research [T]

  • 2012: $79,000

Byrne, N and Wang, X. , AWI Grant - Research [T]

  • 2012: $90,000

Kong, L and Cong, W. Alignment of nanostructures templated from lyotropic liquid crystals - Weiwei Cong, AINSE Grant - Postgraduate Research Award [T]

  • 2013: $8,750
  • 2012: $11,667

MacFarlane, D*, Forsyth, M, Izgorodina, E* and Howlett, P. Cytec Project - Phosphonium ionic liquids for advanced lithium energy storage systems, ARC Collaborative - Linkage - Projects (Round 2), Linkage PhD student [T]

  • 2013: $41,250
  • 2012: $27,500

Beladi, H. Study of the effect of prior austenite grain size on low temperature bainite transformation characteristics using in-situ neutron diffraction technique, AINSE Awards [T]

  • 2012: $0

Mai, Y* and Guo, Q. Toughening thermosets by highly ordered nanostructures, ARC Grant - Discovery Projects [T]

  • 2013: $43,000
  • 2012: $62,000

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet, ARC Collaborative - Linkage - Projects (Round 1), Linkage PhD student, Linkage PhD student [T]

  • 2013: $75,490
  • 2012: $103,848

Wang, X, Rajkhowa, R, Li, J and Liu , X*. Understanding the composite structures and properties of wild silk cocoons, ARC Grant - Discovery Projects [T]

  • 2013: $107,843
  • 2012: $114,232

Wu, X* and Hodgson, P. Manufacture of a small areo-engine entirley through additive manufacturing ( to internationally showcase Australias unique scientific, materials development, manufacturing and systems integration capa, Science and Industry Endowment Fund (SIEF) [T]

  • 2013: $26,250

McGregor, B. Fibre Quality: Meeting market requirements, AWI Grant - Research [T]

  • 2013: $50,000

Forsyth, M, MacFarlane, D* and Armand, M*. Future Sodium Based Electrochemical Energy Storage Technologies., ARC Grant - Discovery Projects [T]

  • 2013: $70,002

Lin, T. Proof of concept for Directional Water-Transport Wool Fabrics, AWI Grant - Research [T]

  • 2013: $35,000

Rajkhowa, R and Wang, X. Improving length, strength and fitness of cotton fibre: A PhD study, CRDC Grant - Research [T]

  • 2013: $23,000

Wu, X*, Hodgson, P and Zhang, X*. Australia-China Research Centre for Light Metals, DIISR Australia-China Science and Research Fund - Department of Innovation, Industry and Regional Development [T]

  • 2013: $3,338

Greene, W. Investigation and development of biological anti-adhesive coatings, ARC DECRA - Discovery Early Career Researcher Award [T]

  • 2013: $133,279

Hodgson, P, Kong, L, Dumee, L and Lin, B. Bao Lin NCED Scholarship - Design and characterisation of novel nano-porous metal membranes by specific metal allow films de-alloying, National Centre of Excellence in Desalination - Scholarship [T]

  • 2013: $10,000

Wang, X. Design of Thermal Cotton / Wool fabrics from Australian Premium cotton and wool fibres, CRDC Grant - Research [T]

  • 2013: $236,033

Ferry, M*, Stanford, N, Hodgson, P, Laws, K* and Quadir, M*. Reducing the environmental impact of steel making through direct strip casting, ARC Collaborative - Linkage - Projects (Round 2) [T]

  • 2013: $15,000

Dumee, L. Patterned functionalization, stitching and decoration of carbon nanotube and graphene porous composites by gamma-irradiation, AINSE Awards [T]

  • 2013: $8,400

Hodgson, P, Stanford, N and Pereloma, E*. Advanced high strength steels produced by energy efficient direct strip casting, ARC Grant - Discovery Projects [T]

  • 2013: $105,771

Wang, X and Byrne, N. Understanding the interaction between wool fibre surface and ionic liquids, ARC Grant - Discovery Projects [T]

  • 2013: $114,232

Chen, Y, Glushenkov, A and Gogotsi, Y*. Nanoporous Nanorods with Improved Electrochemical Properties, ARC Grant - Discovery Projects [T]

  • 2013: $114,232

Wang, X, Hurren, C and Sun, L. New developments and opportunities for cotton yarns and fabrics, CRDC Grant - Research [T]

  • 2013: $58,975

Research Income - Other Public Sector Funding

Wang, X. Improving production efficiency, quality and value-adding of rare natural fibres [U]

  • 2009: $38,700

Hodgson, P and Sudharsan, R. The Crash Behaviour of Advanced Steels and Alloys [U]

  • 2008: $33,000

Sun, L, Wang, X and Cookson, P. GHD Smart Technology Award [U]

  • 2008: $4,545

Wang, X. Sheep CRC Colour Program - Deakin 01-Wool Colour [U]

  • 2013: $163,582
  • 2012: $99,358
  • 2011: $193,164

Wen, C* and Hodgson, P. Developing Biodegradable Magnesium Alloys for Implant Materials [U]

  • 2009: $120,000

Hodgson, P. Development of a Single Piece Carbon Fibre Wheel [U]

  • 2010: $17,500
  • 2009: $65,000

Lin, T and Wang, X. Liquid Management Fabrics [U]

  • 2012: $15,000
  • 2011: $10,000

Collins, P. Development of action sports performance fabric [U]

  • 2012: $37,500

McGregor, B and Preston, J. Greasy Wool Handle - CRC Scholarship James Preston [U]

  • 2013: $15,000
  • 2012: $30,000
  • 2011: $15,000

Torriero, A, Horn, R and Brokenshire, R. Passivation and Rate-determining Factors in Bio-leaching of Minerals [U]

  • 2012: $0
  • 2011: $75,000

Kong, L and Brooks, M. Innovative environmental remediation through multidisciplinary collaboration [U]

  • 2012: $68,035

Hurren, C and Wang, J. ADA Researcher in Business Hemp project [U]

  • 2013: $15,000
  • 2012: $35,000

Fox, B, Suryanarayana, M and Magniez, K. Investigation into Aircraft Plastic's repair components [U]

  • 2012: $50,000

Forsyth, M and Rowland, B. Scholarship - Strategies for developing self-repairing oxides to protect steel system [U]

  • 2013: $32,000
  • 2012: $32,000

Skourtis, C. Process Optimisation [U]

  • 2012: $105,840

Rajkhowa, R. Advanced Materials from Wild Silk Protein [U]

  • 2012: $20,500

Sunarso, J. Research collaboration in the electrocatalysts development for batteries and fuel cells [U]

  • 2012: $10,000

Walsh, T. Underpinning Development in Advanced Materials with Molecular Simulation [U]

  • 2013: $50,000
  • 2012: $10,000

Parratt, A and Hodgson, P. Microfluidic Devices for Pedigree Analysis [U]

  • 2013: $10,000

Wang, X. Victoria India Doctoral Scholarships VIDS Program 2013 - Amol Patil [U]

  • 2013: $90,000

Research Income - Industry and Other Funding

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V]

  • 2013: $-150,364
  • 2012: $63,818
  • 2011: $104,530

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece [V]

  • 2011: $15,000

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products [V]

  • 2011: $20,000

Fox, B. Research into composite solar roofing materials [V]

  • 2011: $-100,000

Collins, P. I-Beam Optimisation Design - RIB [V]

  • 2012: $17,938
  • 2011: $17,938

Fox, B, Naebe, M, Fabijanic, D and Fabijanic, D. Commercial Project P6.1 DMTC/DSTO/ADA/VCAMM Armour Research; P3.7: Research, Development, Design and Manufacture of a New Combat Helmet [V]

  • 2013: $120,108
  • 2012: $240,111
  • 2011: $118,000

Wang, X and Hurren, C. Materials for protective gloves [V]

  • 2012: $112,000
  • 2011: $140,000

Lin, T and Wang, X. Liquid Management Fabrics [V]

  • 2012: $0
  • 2011: $0

Collins, P. Powercor Australia Ltd - Tie Wire Assessment [V]

  • 2012: $18,100

Collins, P. VR TEK Wheels initial feasibility study [V]

  • 2012: $5,000
  • 2011: $5,000

Wang, X, Rajkhowa, R, Marano, R* and Atlas, M*. Engineering a silk fibroin based ear drum with optimum acoustic properties [V]

  • 2013: $33,392
  • 2012: $66,858

Hurren, C. RIB Placement Contract - Zhik Pty Ltd [V]

  • 2012: $25,775
  • 2011: $48,000

Wang, X and Morsi, Y*. Advanced 3D Fibrous Structures for Vascular Graft Applications [V]

  • 2013: $20,000
  • 2012: $20,000
  • 2011: $20,000

Hurren, C and Wang, J. ADA Researcher in Business Hemp project [V]

  • 2012: $83,374

Torriero, A and Efthimiadis, J. Development of an Analytical technique to quantify free choline concentration from Agricultural Organics' ("AO") fermentation processes [V]

  • 2012: $15,000

Fox, B, Naebe, M and Magniez, K. PE Pipe Material Upgrade Feasibility Study [V]

  • 2013: $0
  • 2012: $286,050

Beer, A* and Collins, P. FEA consultancy of solar panel frames [V]

  • 2012: $5,000

Kong, L, Gao, W, Yang, C and McClelland, S. Development of an erosion - corrosion & heat transfer model for the salt water heat exchangers at Shell's Geelong Refinery & recommendations for erosion-corrosion reduction & heat transfer improvement [V]

  • 2012: $10,182

Howlett, P, Wang, X, Lin, T, Fang, J, Forsyth, M and Efthimiadis, J. Project 7.4.2 - Portable Power Storage [V]

  • 2013: $148,598
  • 2012: $29,000

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V]

  • 2013: $25,000
  • 2012: $5,000

Stanford, N, Hodgson, P, Wen, C*, Beynon, J*, Chen, Y, Pereloma, E*, Beladi, H, Hutchinson, C*, Timokhina, I, Dippenaar, R*, Pigram, P*, Davies, C* and Nie, J*. Investigating materials on the atomic scale using 3-dimensional atom probe tomography [V]

  • 2012: $450,000

Gao, W and Kong, L. Stage 1 Flue Gas Flow Modeling fo rthe F3301 Convective Section and Stage 2 Improvement to Gas Flow in the F3301 Convection Banks [V]

  • 2013: $47,578
  • 2012: $42,787

Hurren, C and Li, Q. Fibre alternative to nitrocellulose in lateral flow assays [V]

  • 2013: $9,692

Hurren, C. Fibre alternative to nitrocellulose in lateral flow assays [V]

  • 2013: $10,000

Fabijanic, D and Barnett, M. Nanostructured steels for ground engaging tools [V]

  • 2013: $12,500

Magniez, K and Suryanarayana, M. Development of new materials via melt compounding of recycled thermoplastics with nanotechnology and micro-technology solutions [V]

  • 2013: $31,250

Hodgson, P. The analysis of 10 iron allow samples using spectrometer technology [V]

  • 2013: $0

Fabijanic, D. Technical consultancy [V]

  • 2013: $1,800

Fabijanic, D. Strategies to improve the ductibility of Zn6AI3Mg coatings [V]

  • 2013: $10,000

Howlett, P, Hollenkamp, A, Stojcevski, A and Forsyth, M. SPAusnet Grid Energy Storage Project [V]

  • 2013: $17,000

Fabijanic, D. Process proving of boronizing in a fluid bed reactor [V]

  • 2013: $12,500

She, M and Kong, L. Researcher in Business Project with T J McLean Investments - Recycling bulky waste to reduce carbn emission and landfill [V]

  • 2013: $52,149

Hurren, C. Extreme sports safety program - Draggin Jeans [V]

  • 2013: $57,709

Sutti, A, Collins, P and Parhizkar, M. Production of a pilot manufacturing plant for the manufacture of short nanofibres [V]

  • 2013: $33,182

Kong, L and Gao, W. Shell Geelong Salt Water Cooling Water Intake Sand Settling Study [V]

  • 2013: $27,960

Naebe, M, Fabijanic, D and Fox, B. VCAMM DMTC Project 7.1.2 - High Curvature Armour Systems [V]

  • 2013: $38,739

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2010: $18,400
  • 2009: $20,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2010: $26,250
  • 2009: $52,500

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2009: $18,980

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2008: $5,000

Wang, X and Hurren, C. A study into the methods of cleaning wool [V.1]

  • 2009: $5,500

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2009: $14,500

Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide. [V.1]

  • 2008: $46,875

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness [V.1]

  • 2009: $10,000

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface [V.1]

  • 2009: $50,000

Hodgson, P, Rolfe, B, Yan, W*, Kelly, G and Okonkwo, P. Reducing tool wear through novel surface treatments and improved lubrication [V.1]

  • 2010: $15,000
  • 2009: $15,000

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece [V.1]

  • 2010: $30,000
  • 2009: $30,000

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products [V.1]

  • 2010: $30,000
  • 2009: $30,000

Tsuzuki, T, Wang, X and Zhang, L. Biomaterials and functional textiles [V.1]

  • 2010: $25,000

Hodgson, P and Fabijanic, D. Novel Fluidised Bed Duplex Surface Treatments for Ferrous Materials [V.1]

  • 2010: $-33,546
  • 2009: $122,929

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2008: $26,137

Nahavandi, S. Research on Parallel Kinematics Robot [V.1]

  • 2008: $100,000

Wang, X. Sheep CRC Colour Program - Deakin 01-Wool Colour [V.1]

  • 2009: $25,000

Liu, X and Wang, X. Alpaca Fleece Quality Improvement [V.1]

  • 2009: $5,000

Fabijanic, D, Hodgson, P and Reuben, J*. The carburising resistance of nickel and iron aluminide surface layers [V.1]

  • 2010: $6,600

Fox, B. Research into composite solar roofing materials [V.1]

  • 2010: $100,000

Collins, P. I-Beam Optimisation Design - RIB [V.1]

  • 2010: $21,938

Fox, B, Naebe, M, Fabijanic, D and Fabijanic, D. Commercial Project P6.1 DMTC/DSTO/ADA/VCAMM Armour Research; P3.7: Research, Development, Design and Manufacture of a New Combat Helmet [V.1]

  • 2010: $56,000

Wang, X and Hurren, C. Materials for protective gloves [V.1]

  • 2010: $40,000

Henderson, L and Fairfull-Smith, K*. Nanotablets: small medicine with big effects - detecting oxidative stress in cells [V.1]

  • 2013: $20,000

Research Income - Industry and Other Funding - International A (Competitive, Peer-Reviewed Research Grant Income)

Wang, X, Wang, L, Lin, T and Yu, H*. The Properties and Processing Performance of Ultrasonically Cleaned Wool Fibres [V.2]

  • 2012: $22,000
  • 2010: $33,000

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling [V.2]

  • 2012: $6,000
  • 2011: $6,000

Wang, X and Hurren, C. Australian Ultrafine Wool Dehairing and Processing [V.2]

  • 2013: $100,000

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P and Dingle, M. Predicting tool life issues of AHSS stampings. [V.3]

  • 2009: $50,290

Wang, X, Wang, L, Lin, T and Yu, H*. The Properties and Processing Performance of Ultrasonically Cleaned Wool Fibres [V.3]

  • 2009: $34,982

Lapovok, R*, Timokhina, I, Hodgson, P, Toth, L*, Bhattacharjee, D* and Dhinwal, S. Enhanced Mechanical Properties of Steel Sheet through Novel Approach in Asymmetric Rolling [V.3]

  • 2009: $6,000

Kong, L, Wang, X and Lin, T. Formation and characterisation of continuous electrospun nanofibre yarns [V.3]

  • 2012: $88,000

Hurren, C. Hemp fibre separation [V.3]

  • 2012: $283,880
  • 2011: $80,000

Hodgson, P, Kong, L, Barnett, M and Rolfe, B. Cold Stamping of Advanced High Strength Steels [V.3]

  • 2013: $50,000
  • 2012: $50,000

Wang, X, Chen, W and Li, J. Modification of wool with photo-catalysed oxidation and its effect on Dyeing Properties [V.3]

  • 2013: $50,000
  • 2012: $30,000

Prasad, P*, Prasad, P* and Walsh, T. Bio-nanocombinatorics to Achieve Precisely-Assembled Multicomponent, Functional Hybrid Nanomaterials [V.3]

  • 2013: $126,776
  • 2012: $43,391

MacFarlane, D*, Forsyth, M, Izgorodina, E* and Howlett, P. Cytec Project - Phosphonium ionic liquids for advanced lithium energy storage systems [V.3]

  • 2013: $48,112
  • 2012: $25,000

Hodgson, P, Barnett, M, Rolfe, B and Yang, C. Flexible roll forming of advanced high strength steel sheet [V.3]

  • 2013: $35,000
  • 2012: $35,000

Lin, T. Durable Water Resistant Coating [V.3]

  • 2013: $5,000
  • 2012: $10,000

Hurren, C. Hemp Fibre separation - proof of concept [V.3]

  • 2013: $19,987

Research Income - Other Funding Sources

Hilditch, T and Hodgson, P. Auto CRC Initial Project 14, Rapid Tooling Development, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $20,441

Nahavandi, S and Hodgson, P. Auto CRC Initial Project 12, Virtual Training, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2011: $0
  • 2010: $165,876

Barnett, M. Wrought Magnesium Alloys Development, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2013: $28,255
  • 2012: $198,914
  • 2011: $277,100

Hodgson, P and Sudharsan, R. The Crash Behaviour of Advanced Steels and Alloys, CRC for Advanced Auto Technology - Scholarship, CRC for Advanced Auto Technology - Scholarship [X]

  • 2010: $26,356
  • 2009: $33,000

Hodgson, P and Nikhare, C. The development of low cost, complex shapes from advanced high strength steels using low pressure hydroforming, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2010: $3,354
  • 2009: $13,000

Dingle, M and Hodgson, P. Business Development Activities, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2010: $9,983
  • 2009: $37,500
  • 2008: $12,500

She, M, Kong, L and Chen, R. C3-501, Smart Seat for Monitoring Driver's Attentive State and Detecting Early Sign of Fatigue, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2011: $-2,796

Fox, B, Magniez, K, Deveth, A, Vella, J and Carreno, V*. C1 32 Composite Development, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2011: $63,340
  • 2010: $126,663
  • 2009: $56,219

Yan, W*, Yan, W, Weiss, M and Hu, E. Auto CRC Mini Project UG5106, UG4706, UG1706, UG1906, UG2906, UG3006 plus UG5409 and UG 5509 (2009), CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2009: $8,000
  • 2008: $7,433

Wang, X. Sheep CRC Colour Program - Deakin 01-Wool Colour, CRC - Sheep [X]

  • 2010: $256,325

Wen, C and An, Y. Metal foam core components for automotive applications - C1-506, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Wang, X, Hodgson, P and Kirkland, M. Development of Macroporous Scaffolds for Biomedical Applications, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $114,176
  • 2012: $52,101
  • 2011: $132,136
  • 2010: $862,627
  • 2009: $58,000

Fox, B. Bellmont Automotive Components-The demonstration of complex shape composite components for the automotive industry using out-of-autoclave resin curing, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2012: $0
  • 2011: $0
  • 2010: $76,638
  • 2009: $30,735

Beer, A. Education and training (postgraduate co-ordinator), CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2013: $2,806
  • 2012: $9,961
  • 2011: $11,343
  • 2010: $3,475

Dingle, M, Hilditch, T, Rolfe, B, Will, F, Balasingh Sugirtharaj, P, Lenz, S and Fiedler, K. Development of a lightweight modular mixed material vehicle platform - C2-23, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2012: $255,555
  • 2011: $178,449
  • 2010: $122,815

Beer, A. Joining of light metals, CRC_CAST Grant - Research [X]

  • 2013: $2,055
  • 2012: $21,188
  • 2011: $23,947
  • 2010: $14,780

Kong, L and Li, C. Ultrastrong polymer nanocomposites for future automobiles C1-512, CRC for Advanced Auto Technology - Scholarship, CRC for Advanced Auto Technology - Scholarship [X]

  • 2012: $23,168
  • 2011: $25,274

Beer, A, Barnett, M and Sian, R. The Fatigue Behaviour of Cost Effective Magnesium and Titanium Alloys, CRC for Advanced Auto Technology - Scholarship, CRC for Advanced Auto Technology - Scholarship [X]

  • 2012: $23,168
  • 2011: $25,274
  • 2010: $26,356

Fox, B. C2-27 Lightweight Interiors, CRC_AAT Cooperative Research Centre for Advanced Automotive Technology Ltd [X]

  • 2012: $155,402
  • 2011: $53,877
  • 2010: $12,868

Magniez, K, Magniez, K and Sutti, A. Novel self-healing fibre-reinforced composites, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $55,144
  • 2012: $1,003
  • 2011: $37,872

Fox, B. Nano-Enhanced Carbon Fibre Composites, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $22,813
  • 2012: $4,043
  • 2011: $58,333
  • 2010: $0

Guo, Q. Advanced Manufacturing CRC Project 1.8.2a. Rubber Waste recycling Product Ozone based Reclaiming and Activation of Rubber and Rubber Devulcanisation, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $7,834
  • 2012: $108,495
  • 2011: $274,437

Fox, B. Quickstep & RST (Advanced Manufacturing CRC Project 1.6.1a), CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $97,336
  • 2012: $169,823
  • 2011: $218,621
  • 2010: $38,854

Hodgson, P and Fox, B. Project 2.1a - FR-1 Complex Composite Components for Load Bearing Applications, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2012: $0
  • 2011: $328,040
  • 2010: $175,707

Hodgson, P, Dunstan, D*, Sandlin, J and Naebe, M. Project 1.1b - Next Generation Armour Technologies, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2011: $0
  • 2010: $80,626

Hodgson, P, Stanford, N, Phelan, D, Gray, D and Collins, P. Compact Alloy Processing in a Micro Mill Environment, CRC_CAST Grant - Research [X]

  • 2013: $11,411
  • 2012: $103,012
  • 2011: $208,621
  • 2010: $123,621

Fabijanic, D, Hodgson, P and Cicak, I. Project 1.9a Novel Fluidised Bed Reactor Surface Modification Technology for Ferrous and Light Metals., CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2011: $105,728
  • 2010: $283,900

Keshavarz, Z and Hodgson, P. Lightweight Vehicle Structures 3-102 from High Strength Metals - CECAP Research Project, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2013: $195,930
  • 2012: $0

Beer, A. Assessment of Impurities in coke, CRC_CAST Grant - Research [X]

  • 2012: $0

Fox, B, Magniez, K and Garschke, C. 3-118 High-volume process to manufacture carbon fibre composite parts for automotive applications , AutoCRC Ltd [X]

  • 2013: $91,130

Fabijanic, D. Microstructure and properties of bulk high entropy alloys formed by direct laser sintering, CRC_AdManuf Grant - Cooperative Research Centre [X]

  • 2013: $25,414

Magniez, K and Castanet, E. Scholarship for Erwan Castanet - Manufacturing of Bio Composites for Automotive Applications, CRC for Advanced Auto Technology - Scholarship [X]

  • 2013: $0

Weiss, M, Rolfe, B and Pereira, M. Tool Wear Prediction Model on the Stamping of AHSS and UHSS, AutoCRC Ltd [X]

  • 2013: $15,492

Higher Degree by Research Completions

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 17th September 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010