Research Services Division

Deakin Research

1997 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Bathgate, R., Pang, F. and Wang, C.* (1997) Effects of Temperature of the Creep Behaviour of Woven and Stitched Composites, Ninth International Conference on Composite Structures, vol. 0, no. 0, pp. 435-445, Elsevier, United Kingdom [C1]
ERA journal ID: 3731 – Scopus EID: Not tagged
no DRO entry yet for this publication

Gupta, H. and Stoll, U.* (1997) Management Strategies for Oil and Grease Residues, Waste Management and Research, vol. 0, no. 0, pp. 23-32, Asociated Press, UK [C1]
ERA journal ID: 4692 – Scopus EID: Not tagged
no DRO entry yet for this publication

Pang, F., Wang, C.* and Bathgate, R. (1997) Creep Response of Woven-Fibre Composites and the Effect of Stitching, Journal of Composite Science and Technology, vol. 0, no. 0, pp. 91-98, Elsevier, Northern Ireland [C1]
ERA journal ID: 4884 – Scopus EID: Not tagged
no DRO entry yet for this publication

Wang, B. and Chou, S.* (1997) The Behaviour of Laminated Composite Plates as Armour, Journal of Materials Processing Technology, vol. 0, no. 0, pp. 279-287, Elsevier, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
no DRO entry yet for this publication

Baliga, B. and Doyle, D.* (1997) Mechanics of Material Removal in Puch Grinding, World Congress Manufacturing TechnologyTowards 2000, pp. 715-721, IEAUST, Queensland [E1]
no DRO entry yet for this publication

Crawford, B. and Griffiths, J.* (1997) Fatigue and Quantitative Fractography of An Al-6061 Matrix Composite, Ninth International Conference on Fracture, pp. 2581-2586, Pergamon, Sydney [E1]
no DRO entry yet for this publication

Ferguson, C. (1997) Remote Access to Computer-Controlled Manufacturing Facilities for Engineering Students, World Manufacturing Congress International Symposium on Manufacturing Systems, pp. 83-88, ICSC Academic Press, New Zealand [E1]
no DRO entry yet for this publication

Florance, J., Long, J. and Lemckert, C.* (1997) First Year Engineering Students and the Non-Traditional Delivery of a Practical, Australasian Asssociation for Engineering Education, pp. 413-417, "University of Ballarat, School of Engineering", Ballarat, Victoria [E1]
no DRO entry yet for this publication

Hodgson, P., Collinson, D.* and Davies, C.* (1997) The Effect of Carbon on the Hot Deformation and Recrystallisation of Austenite, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 483-489, "The Minerals, Metals and Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P. and Pereloma, E.* (1997) Microstructural Characterisation of Strip Steel after Simulated Thermomechanical Processing and Accelerated Cooling, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 803-809, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Priestner, R.* and Frawley, L.* (1997) Effect of Sulphur in Thin Slab Cast Direct Rolled Mild Steel, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 2169-2175, "Minerals, Metals & Materials Society, USA", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Staiger, M.*, Brownrigg, A.*, Davies, C.* and Jessop, B.* (1997) The Effects of Nitrogen on the Microstructural Evolution of Low Carbon Manganese Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 515-522, USA, USA [E1]
no DRO entry yet for this publication

Hodgson, P., Cizek, P.*, Davies, C.*, Wynne, B.* and Muddle, B.* (1997) The Effects of Processing Parameters on the Mechanical Properties of Low Carbon Microalloyed Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 837-843, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P. (1997) The Metadynamic Recrystallisation of Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 121-131, "Minerals, Metals and Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Wynne, B.*, Collinson, D.* and Brownrigg, A.* (1997) Effect of Carbon Content on the Hot Flow Stress and Dynamic Recrystallisation Behaviour of Plain Carbon Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 539-545, "Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Cizek, P.*, Wynne, B.* and Muddle, B.* (1997) Effect of Strain on the Transformation Characteristics of Low Carbon Microalloyed Steels, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 875-881, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Wynne, B.*, Hurley, P.* and Muddle, B.* (1997) Microstructural Study of Softening Process in a Duplex Stainless Steel Deformed in Hot Torsion, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 387-393, "The Minerals, Metals and other Materials", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Cizek, P.*, Wynne, B.* and Muddle, B.* (1997) Microstructure Evolution in An Austenitic Stainless Steel Deformed in Hot Torsion Within the Dynamic Recovery Regime, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 709-715, "The Minerals, Metals & Materials Society", USA [E1]
no DRO entry yet for this publication

Hodgson, P., Zhang, X.* and Thomson, P.* (1997) The Stress Strain and Recrystallisation Behaviour for Deformation Involving a Change in Strain Path, International Conference on Thermomechanical Processing of Steels and Other Materials, pp. 1705-1711, "Minerals, Metals & Materials Society, USA", USA [E1]
no DRO entry yet for this publication

Hu, W. and Thomson, P.* (1997) Solution of Rigid Plastic Fe Systems using Shifted Iccg Method, World Congress Manufacturing Technology Towards 2000, pp. 259-269, James Cook University, Cairns, Australia [E1]
no DRO entry yet for this publication

Liu, R., Bathgate, R. and Wang, C.* (1997) Fracture Analysis of Cracked Spherical Shells, Advances in Fracture Research, pp. 2039-2046, Elsevier, United Kingdom [E1]
no DRO entry yet for this publication

Lu, G.* and Wang, B. (1997) On the Laser Cutting of Thin Ceramic Tiles, World Manufacturing Congress, pp. 260-266, ICSC Academic Press, Canada [E1]
no DRO entry yet for this publication

Mandal, P. (1997) Development of a System Dynamics Model for Quality, "Proceedings of the Fourth International Meeting Decision Sciences Institute", pp. 632-634, DSI, Sydney [E1]
no DRO entry yet for this publication

Mandal, P. (1997) Systems Concepts Inequality - Development of a Quality-Process Model, Proceedings of the 26th Annual Meeting of the Western Decisions Sciences Institute, pp. 601-603, WDSI, Hawaii [E1]
no DRO entry yet for this publication

Mandal, P. and Sweeny, M. (1997) Development and Implementation of a Mis in Job Shop Environment, "Proceedings of the Fourth International Meeting Decision Sciences Institute", pp. 384-386, Sydney [E1]
no DRO entry yet for this publication

Mandal, P. and Bhadury, B.* (1997) Quality Management Practices in Indian Manufacturing Industry, Proceedings of the International Symposium on Manufacturing Management ISM'97, pp. 126-132, ICSC Academic Press, Auckland [E1]
no DRO entry yet for this publication

Mandal, P. and Sweeny, M. (1997) Implementation of MIS in a Job Shop Environment, "Proceedings of the Twenty-Sixth Annual Meeting of the Western Decisions Sciences Institute ", p. 737, Western Decisions Sciences Institute, Hawaii [E1]
no DRO entry yet for this publication

Palmer, S. (1997) A World Wide Web-Based Active Tutorial in Accounting Principles for Engineering and Technology Students, 6th Annual Australasian Conference of Engineering Management Educations., University of Adelaide, Adelaide [E1]
no DRO entry yet for this publication

Palmer, S. (1997) Current Issues and Limitations in using the Internet for Teaching and Learning in Engineering and Technology, Ist Asia-Pacific Forum on Engineering and Technology Education, pp. 307-311, UNESCO Supported International Centre for Engineen, Monash University, Melbourne [E1]
no DRO entry yet for this publication

Pang, F., Bathgate, R. and Wang, Y.* (1997) Delamination and Creep Rupture of Woven Composite, Advances in Fracture Research, pp. 885-892, Elsevier, United Kingdom [E1]
no DRO entry yet for this publication

Pang, F., Bathgate, R. and Wang, C.* (1997) Creep and Creep Rupture of Stitched Composites, 11th International Conference on Composite Materials, pp. 97-106, Australian Composite Structures Society, Australia [E1]
no DRO entry yet for this publication

Puckett, J., Selvalingam, S., Baskaran, K. and Dharmabalan, P.* (1997) Water Quantity and Quality Modelling of the Barwon Water Supply System, AWWA 17th Federal Convention, pp. 457-464, Australian Water and Wasterwater Association, Melbourne [E1]
no DRO entry yet for this publication

Wang, Y. and Bathgate, R. (1997) Models of Anodic Diffusion When Joining PSZ to to Nickel, 11th International Conference on Composite Materials, pp. 661-671, Australian Composite Structures Society, Australia [E1]
no DRO entry yet for this publication

Palmer, Stuart R. (1997) Engineering education for primary school students, in Gourley, T. D. and Stewart, J. I. (eds), Putting students back into engineering education : proceedings of the 9th annual Convention & Conference, 14-17 December 1997, University of Ballarat, Victoria, pp. 228-232, School of Engineering, University of Ballarat, Ballarat, Vic. [E1.1]
DRO entry for this publication

Briggs, H. and Thompson, L. (1997) Mainstreaming use of Converging Communication and Information Technologies in Tertiary Teaching- a View from the Trenches, CAUSE in Australasia '97, pp. 1-7, University of Melbourne, Melbourne [E2]
no DRO entry yet for this publication

Collinson, D.*, Hodgson, P. and Davies, C.* (1997) Development of Constitutive Models for the Hot Deformation Behaviour of Low and High Carbon Steels, Australiasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 1234-1240, IPMM'97, QLD [E2]
no DRO entry yet for this publication

Hodgson, P., Collinson, D.*, Davies, C.* and Kong, L. (1997) "The Application of Phenomenological, Empirical and Ann Models to the Prediction of Hot Strength in Steels.", Australiaasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 1248-1254, IPMM 97, QLD [E2]
no DRO entry yet for this publication

Hodgson, P., Crawford, B. and Pereloma, E.* (1997) Strain Induced Precipitation of Nbc During Hot Deformation, "7th International Symposium on Physical Simulation of Casting, Hot Rolling and Welding", pp. 185-191, Dynamic Systems Inc. & NRIM Japan, Japan [E2]
no DRO entry yet for this publication

Hodgson, P., Collinson, D.* and Perrett, B.* (1997) The use of Hot Torsion to Simulate the Thermomechanical Processing of Steel, Proceedings of the 7th International Symposium on Physical Simulation, pp. 219-229, Dynamic Systems Inc. & NRIM Japan, Japan [E2]
no DRO entry yet for this publication

Kong, L.X., Platfoot, R.A.*, She, F.H.* and Hodgson, P.D. (1997) Moisture transfer through porous textiles with temperature differences, Proceedings ATC '97 : the 4th Asian Textile Conference : Safe comfortable and ecological textiles for the 21st century's needs., pp. 654-660, The Conference, Taipei [E2]
DRO entry for this publication

Li, L., Barry, D.* and Morris, M.* (1997) Parallel Simulated Annealing using Cilk Language: Applications in Estimating Transport Parameters for Groundwater Contaminants, International Congress on Modelling and Simulation Proceeedings, pp. 616-620, Modelling and Simulation Society of Australia, Tasmania [E2]
no DRO entry yet for this publication

Wang, A.*, Thomson, P.* and Hodgson, P. (1997) A Study of Pore Closure and Welding using Lead as a Model Material., Australiasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 1241-1247, IPPPM'97, QLD [E2]
no DRO entry yet for this publication

Wang, B. and Lok, T.* (1997) Modelling of Plastic Deformation at High Strain Rates, 2nd Asia Pacific Conference on Shock and Impact Loads on Structures, pp. 569-576, CI Premier, Melbourne [E2]
no DRO entry yet for this publication

Wang, B. and Lok, T.* (1997) Penetration of Armour Plates - An Experimental Investigation, 2nd Asia Pacific Conference on Shock and Impact Loads on Structures, pp. 577-582, CI Premier, Melbourne [E2]
no DRO entry yet for this publication

Zhang, X.*, Hodgson, P. and Thomson, P.* (1997) Incorporating the Effect of Change in Strain Path in Constitutive Models of Hot Deformation., Australiasia-Impact Forum on Intelligent Processing and Manufacturing of Materials., pp. 941-947, IPMM'97, Qld [E2]
no DRO entry yet for this publication

Lu, G.* and Wang, B. (1997) Numerical Studies of Inertia Effect in a Simple Plate-Structure Under Impact Loading, Symposium on Plasticity and Impact Mechanics, pp. 436-448, New Age International, New Delhi, India [L1]
no DRO entry yet for this publication

Grants and Consultancies

Grants with funding during 1997

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 20th August 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010