Research Services Division

Deakin Research

1998 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Baliga, B., Doyle, E.* and Thompson, W.* (1998) Computer Simulation for Punch Grinding, Transactions of Mechanical Engineers, vol. 0, no. 0 [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Cizek, P.*, Wynne, B.*, Davies, C.*, Muddle, B.*, Hodgson, P. and Brownrigg, A. (1998) Effect of Composition and Prior Austenite Deformation on the Transformation Characteristics of Ultralow-Carbon Microalloyed Steels, Materials Science Forum, vol. 0, no. 0, pp. 177-184, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Ferguson, C. (1998) The Continuous Professional Development of Engineers and Flexible Learning Strategies, International Journal of Lifelong Education, vol. 0, no. 0, pp. 173-183, Taylor & Francis Ltd, UK [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Herron, J.*, Hodgson, P. and Cardew-Hall, M.* (1998) Defining the Operating Window for an Automotive Sheet Pressing Operation, Materials Processing Technology, vol. 0, no. 0, pp. 68-75, Elsevier Science SA, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hodgson, P. and Cardew-Hall, M.* (1998) Process and Product Integration: Research Challenges, Materials Processing Technology, vol. 0, no. 0, pp. 1-7, Elsevier Science SA, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hodgson, P., Hickson, M.* and Gibbs, R.* (1998) The Production and Mechanical Properties of Ultrafine Ferrite, Materials Science Forum, vol. 0, no. 0, pp. 63-72, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hurley, P.*, Muddle, B.*, Hodgson, P., Davies, C.*, Wynne, B.*, Cizek, P.* and Hickson, M.* (1998) Comparison of the Deformation Characteristics of a Ni-30wt% Fe Alloy and Plain Carbon Steel, Materials Science Forum, vol. 0, no. 0, pp. 159-166, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Collinson, D.* (1998) Modelling the Effect of Carbon Content on Hot Strength of Steels Using a Modified Artificial Neural Network, ISIJ International, vol. 0, no. 0, pp. 1121-1129, Iron and Steel Inst. of Japan, "Tokyo, Japan" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Lanzon, J., Cardew-Hall, M.* and Hodgson, P. (1998) Characterising Frictional Behaviour in Sheet Metal Forming, Materials Processing Technology, vol. 0, no. 0, pp. 251-256, Elsevier Science SA, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Long, J., Finlayson, T.* and Mernagh, T.* (1998) Measuring Oxygen Stoichiometry in YBa2Cu3O7-X by Micro-Raman Spectroscopy, Superconductor Science and Technology, vol. 0, no. 0, pp. 1137-1142, IOP Publishing Ltd, "Bristol, UK" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Lu, G.*, Fan, H.* and Wang, B. (1998) An Experimental Method ofr Determining Ductile Tearing Energy of Thin Metal Plates, Metals and Materials, vol. 0, no. 0, pp. 432-435, Korean Institute of Metals and Materials, "Seoul, Korea" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Mandal, P. and Sohal, A.* (1998) Modelling Helps in Understanding Policy Alternatives: A Case, Journal of Management in Engineering, vol. 0, no. 0, pp. 41-48, American Society of Civil Engineers, "Reston, USA" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Palmer, S. (1998) Current Issues and Limitations in Using the Internet for Teaching and Learning, Australian Educational Computing, vol. 0, no. 0, pp. 12-17, Australian Council for Computers in Education, "Bel Connen, ACT, Australia" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Pereloma, E.* and Hodgson, P. (1998) The Effect of Transformation Path on the Final Microstructure of High-and Low-Silicon 0.1 wt.% C Steels, Materials Science & Engineering A, vol. 0, no. 0, pp. 30-39, Elsevier, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Pereloma, E.*, Timokhina, I.* and Hodgson, P. (1998) Thee Effect of Si on the Microstructural Evolution of Discontinuously Cooled Strip Steels, Materials Science Forum, vol. 0, no. 0, pp. 237-244, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Staiger, M.*, Davies, C.*, Hodgson, P., Jessop, B.* and Brownrigg, A.* (1998) Microalloying with Titanium to Improve Drawability in Low Carbon Wire-Rod Steels, Materials Science Forum, vol. 0, no. 0, pp. 575-582, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wang, B., Kong, L., Hodgson, P. and Collinson, D.* (1998) Improvement of the Prediction Accuracy and Efficiency of Hot Strength of Austenitic Steels with Optimised ANN Training Schemes, Metals and Materials, vol. 0, no. 0, pp. 823-826, Korean Institute of Metals and Materials, "Seoul, Korea" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wang, B., Hu, W., Kong, L. and Hodgson, P. (1998) The Influence of Rolling Speed on the Rolling of Metal Plates, Metals and Materials, vol. 0, no. 0, pp. 915-919, Korean Institute of Metals and Materials, "Seoul, Korea" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wong, K. and Mandal, P. (1998) Internet Supported Problem-Based Learning for Flexible Teaching, Australasian Journal of Engineering Education, vol. 0, no. 0, pp. 79-91, The Australasian Assoc for Engineering Education, "Clayton, Vic" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wong, K. and Mandal, P. (1998) An Alternative Model of Teaching System Dynamics Modelling, Systems Dynamics Society of India, vol. 0, no. 0, pp. 9-24, Systems Dynamics Society of India, "Kharagpur, India" [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Bhadury, B.* and Mandal, P. (1998) Adoption of Quality Management Concepts Amongst Indian Manufacturers, Productivity - A Quarterly Journal of the National Productivity Council, vol. 0, no. 0, pp. 443-452, New Age International Pty Ltd, "New Dehli, India" [C3]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Brownrigg, A. and Mandal, P. (1998) Can a Professional Doctorate Assist in the World of Manufacturing?, Manufacturing World, vol. 0, no. 0, pp. 9-10, Research Publicaitons Pty Ltd, Victoria [C3]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Abachi, H.*, Abdollahian, M.*, Nahavandi, S. and Walker, J.* (1998) Analysis of Routing Degradation Arising from Failure in Tree Multi Processor Netowrks, Third International Conference on Computational Intelligence and Neurosciences, pp. 302-305, Association for Intelligent Machinery Inc., USA [E1]
no DRO entry yet for this publication

Baliga, B., Doyle, E.*, Hodgson, P. and Wang, B. (1998) Punch Grinding Torque Analysis, "Proceedings of the International Conference on Theoretical, Applied, Computational and Experimental Mechanics", Indian Institute of Technology, "Kharagpur, India" [E1]
no DRO entry yet for this publication

Bathgate, R., Hou, J., Hu, W.* and Hill, B. (1998) The Application of JAVA Applets in the Teaching of Structural Analysis, Waves of Change - 10th Australasian Conference on Engineering Education, pp. 497-502, Central Qld Uni, Australia [E1]
no DRO entry yet for this publication

Chow, S. and Mandal, P. (1998) Quality Assurance for Beef Through Multispectral Image Analysis, The 1998 Symposium on Image Speech Signal Processing and Robotics, pp. 195-200, The Chinese University of Hong Kong, Hong Kong [E1]
no DRO entry yet for this publication

Chow, S., Chan, S. and Gillies, M. (1998) Parallel Implementation of Fractal Image Compression Using Multiple Digital Signal Processors, Third Asian Conference on Computer Vision, pp. 714-721, Springer-Verlag, Berlin [E1]
no DRO entry yet for this publication

Hu, W. (1998) The Development of Interactive Course Material Using JAVA, First UICEE Annual Conference on Engineering Education, pp. 248-252, UNESCO - Intl Centre for Engineering Education, Melbourne [E1]
no DRO entry yet for this publication

Ibrahim, R.*, Abachi, H.* and Nahavandi, S. (1998) Small Specimen Procedure for Quality Control Testing to Evaluate Fracture Toughness of Manufacturing Materials, Sixth International Applied Statistics in Industry Conference, pp. 65-72, International Statistical Applicaitons Institute, Melbourne [E1]
no DRO entry yet for this publication

Ibrahim, R.*, Abachi, H.* and Nahavandi, S. (1998) On Performance Improvement of Distributed Manufacturing Systems, Sixth International Applied Statistics in Industry Conference, pp. 107-113, International Statistical Applications Institute, Melbourne [E1]
no DRO entry yet for this publication

Mandal, P., Love, P., Smith, J. and Li, H.* (1998) Modelling and Analysis of Rework in the Design Process of Construction Projects, International Conference on Systems Dynamics, pp. 153-161, The Systems Dynamics Society of India, Kharagpur India [E1]
no DRO entry yet for this publication

Nahavandi, S., Abachi, H.*, Abdollahian, M.* and Lisner, R.* (1998) New Technology Evaluation in Wire Harness Production Using Graphical Simulation, "5th International Conference on Control, Automation, Robotics and Vision (ICARCV'98)", pp. 834-838, Nanyang Technological University, Singapore [E1]
no DRO entry yet for this publication

Nahavandi, S., Abachi, H.* and Abdollahian, M.* (1998) Fuzzy Logic Control of Shopfloor Scheduling, Sixth International Conference on Fuzzy Theory and Technology, pp. 195-198, Association for Intelligent Machinery Inc., USA [E1]
no DRO entry yet for this publication

Nahavandi, S. and Mandal, P. (1998) A Model for Co-operative Manufacturing Network, "International Conference on System Dynamics, ICSD-98", pp. 118-125, System Dynamics Society of India, India [E1]
no DRO entry yet for this publication

Palmer, S. (1998) Mature Age Engineering Students' Perceptions of Engineering Management, 10th Australasian Conference on Engineering Education, pp. 343-346, John Goldston Fac of Engineering & Physical System, Queensland [E1]
no DRO entry yet for this publication

Palmer, S. (1998) Responses of Final-Year Engineering Students to Assessment Tasks Designed to Develop Generic Professional Practice Skills, First UICEE Annual Conference on Engineering Education, pp. 117-121, UNESCO International Centre for Engineering Educan, Monash University Clayton Victoria [E1]
no DRO entry yet for this publication

Palmer, S. (1998) Considerations in the Design of Undergraduate Engineering Management Programs for Flexible Learning, Seventh Annual Australasian Conference of Engineering Management Educators, pp. 141-146, Office of Continuing Education Monash University, Clayton Victoria [E1]
no DRO entry yet for this publication

Wang, B., Bathgate, R. and Baliga, B. (1998) Dynamic Plastic Response of a Stepped Cantilever Under a Striking Tip Load, "International Conference on Theoretical, Applied, Computational and Experimental Mechanics", "Institute of Technology, India", India [E1]
no DRO entry yet for this publication

Wang, B., Baliga, B. and Yang, M.* (1998) On the Impact Damping Effect of Bean Bags, "International Conference on Theoretical, Applied, Computational and Experimental Mechanics", "Institute of Technology, India", Kharagpur [E1]
no DRO entry yet for this publication

Wang, B., Hu, W.* and Wang, Z.* (1998) Modelling of Spallation in Ductile Met;las Subjected to Shock Wave Loading, Structural Integrity and Fracture, pp. 133-137, Australian Fracture Group, Melbourne [E1]
no DRO entry yet for this publication

Wang, B., Yang, M.* and Fok, W.* (1998) Dynamic Failure of Bent Tubular Cantilevers Under Dynamic Tip Loading, The 8th International Symposium on Tubular Structures, pp. 373-379, A A Balkema, Rotterdam [E1]
no DRO entry yet for this publication

Wong, K. and Mandal, P. (1998) Internet Supported Teaching of System Dynamics, International Conference on Systems Dynamics ICSC-98, pp. 40-46, System Dynamics Society of India, India [E1]
no DRO entry yet for this publication

Balatbat, J., Lanzon, J., Cardew-Hall, M.* and Hodgson, P. (1998) Hard Chrome Plating Effects on Friction, Proceedings of Materials 98 [E2]
no DRO entry yet for this publication

Baliga, B., Doyle, E.* and Hodgson, P. (1998) Thermal Modelling of Punch Grinding, Materials '98, pp. 227-232, "Inst of Materials Eng, Australasia Ltd", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Burgess-Dean, L., Crawford, B. and Hodgson, P. (1998) A Mechanical Test for the Durability of Fired Clay Products Using Brinell Hardness Measurements, "The 5th Australasian Masonry Conference, July 1-3", pp. 37-46, Central Queensland University, "Gladstone, Qld Australia" [E2]
no DRO entry yet for this publication

Cizek, P.*, Wynne, B.*, Davies, C.*, Muddle, B.*, Killmore, C.* and Hodgson, P. (1998) Microstructural Characteristics of Mo-Containing Low- and Ultralow-Carbon Microalloyed Pipeline Steels, Proceedings of Materials 98, pp. 547-552, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Crawford, B. and Griffiths, J.* (1998) Tensile Behaviour of a Series of Micral-20TM Reinforced Composites with Differing Reinforcement Volume Fractions, "Materials '98, IMEA Bi-Annual Conference", pp. 723-728, Institute of Materials Engineers Australia, "Uni of Wollongong, Wollongong Australia" [E2]
no DRO entry yet for this publication

Dingle, M., Crawford, B., Whale, J. and Hodgson, P. (1998) The Effect of Retained Strain on Ferrite Formation in C-Mn-Nb Steels, Proceedings of Materials 98, pp. 559-565, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Jaipal, J.*, Davies, C.*, Brownrigg, A., Yuen, W.* and Hodgson, P. (1998) Work Hardening and Strain Rate Sensitivity of 0.06WT%C Steel, Proceedings of Materials 98 [E2]
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Collinson, D.* (1998) Optimisation of ANN Models to Predict the Effect of Carbon Content on the Hot Strength of Austenite, Proceedings of Materials '98, pp. 553-558, "Institute of Materials Engineering, Australasia", Wollongong [E2]
no DRO entry yet for this publication

Kong, L., Collinson, D.* and Hodgson, P. (1998) Application of an Integrated Phenomenological Neural Network Model to Extrapolatively Predict the Hot Strength of Austenitic Steels, Steel Rolling '98, pp. 540-545, Iron & Steel Institute of Japan, Japan [E2]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (1998) Development of an ANN Model Strategy to Improve the Prediction of Flow Strength of Austenitic Steels, Advances in Engineering Computational Technology, pp. 155-164, Civil-Comp Press, "Edinburgh, UK" [E2]
no DRO entry yet for this publication

Kong, L. and Platfoot, R.* (1998) Investigating the Fibre Configuration in Confined Channel Flow with Recirculations, Advances in finite Element Procedures and Techniques, pp. 291-298, Civil-Comp Press, "Edinburgh, UK" [E2]
no DRO entry yet for this publication

Lanzon, J., Cardew-Hall, M.* and Hodgson, P. (1998) Effect of Boundary Lubricant Regimes in Sheet Metal Forming, Proceedings of Materials 98, pp. 239-246, "Institute of Materials Engineering, Australasia L, "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Mandal, P. and Wong, K. (1998) A Framework for Internet Supported Problem Based Learning in Engineering, Third International Open Learning Conference, pp. 245-248, Qld Open Learning Network, Brisbane [E2]
no DRO entry yet for this publication

Mandal, P. (1998) The Extent of Adoption of Quality Improvement Initiatives in Australian and Indian Manufacturing, Eighth International Manufacturing Conference, pp. 328-333, National University of Singapore, Singapore [E2]
no DRO entry yet for this publication

Martin, D.* and Hodgson, P. (1998) Friction Modelling in the Hot Rolling of Steel Strip, Proceedings of Materials 98, pp. 253-258, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Pang, F., Wang, C.* and Bathgate, R. (1998) Modelling of the Creep Behabiour of Stitched and Up-Stitched Woven Composites, Materials '98 - Bienial Materials Conference of the IMEA, pp. 735-740, "Institute of Metals & Materials Eng, Australasia, North Melbourne Vic [E2]
no DRO entry yet for this publication

Wang, B. (1998) Development of High Strength Cermets Containing Nickel and Chromium, Proceedings of Materials '98, pp. 699-704, "Institute of Materials Engineering, Australasia", Wollongong [E2]
no DRO entry yet for this publication

Wang, B., Yang, M.* and Bathgate, R. (1998) Bean-Bag Damping of Honeycomb Sandwich Beans, 5th International Conference on Composite Engineering, pp. 59-60, International Community for Composites Engineering, "Las Vegas, Nevada" [E2]
no DRO entry yet for this publication

Wang, Y. and Bathgate, R. (1998) Reaction-Diffusion Model for Current Enhanced Joining of PSZ to Nickel, Materials '98 - The 51st IMMA National Conference, pp. 277-292, "Institute of Metals & Materials, Australasia", "North Melbourne, Victoria Australia" [E2]
no DRO entry yet for this publication

Wynne, B.*, Cizek, P.*, Hickson, M.*, Davies, C.*, Muddle, B.* and Hodgson, P. (1998) Texture in Cold-Rolled and Annealed Low-Carbon Microalloyed Steels, Proceedings of Materials 98, pp. 185-190, "Institute of Materials Engineering, Australasia", "Wollongong, Australia" [E2]
no DRO entry yet for this publication

Vigneswaran, B. and Tobiason, J.* (1998) Significance of the Volume of the Deposit During Deep Bed Filtration, "Annual Conference of American Water Works Association, 1998", pp. 173-185, American Water Works Association, "Denver, Colorado, USA" [E3]
no DRO entry yet for this publication

Briggs, H. and Chng, D.* (1998) Collaborative Distance Education in Asia: A Strategic Alliance Model, 12th Annual Conference of the Asian Association of Open Universities, Open Uni of Hong Kong, Hong Kong [L2]
no DRO entry yet for this publication

Grants and Consultancies

Grants with funding during 1998

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

1998 - Doctor of Philosophy

Fei Yi Pang. Supervisor: Robert Bathgate
Thesis entitled: A Study of the Creep Behaviour of Stitched Woven Composites.

Henry Senko. Supervisor: Robert Bathgate
Thesis entitled: An Investigation into and Control of Microwave Induced Thermal Run-away.

Yu Wang. Supervisor: Robert Bathgate
Thesis entitled: Joining Magensia Partially Stabilised Zirconia with Nickel by Current Enhancement.

1998 - Master of Science

Matthew Sweeney. Supervisor: Purnendu Mandal
Thesis title not available.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Saturday 19th April 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010