1999 School of Engineering Research Output
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
Wang, X. (1999) Fibre and Textile Engineering for Modern Living, in Junhong Sun (ed.), Science and Technology Advancing Into New Millennium, pp. 327-336, People's Education Press, Beijing [B1]
no DRO entry yet for this publication
Stagnitti, F., Steenhuis, T.*, Parlange, J.*, Allinson, G., Allinson, M., Li, L., Hielig, A.* and Lloyd-Smith, J. (1999) Soil Structure & Chemical Transport: Australian Case Studies, in P Zannetti and YQ Zhang (eds), Environmental Sciences and Environmental Computing, pp. 1-39, FiatLux Publications & Envirocomp Institute, California, USA [B2]
Hickson, M.* and Hodgson, P. (1999) Effect of preroll quenching and post-roll quenching on production and properties of ultrafine ferrite in steel., Materials Science & Technology, vol. 0, no. 0, pp. 85-90, The Institute of Materials, London [C1]
ERA journal ID: Not matching ERA journal listHickson, M.*, Hodgson, P. and Gibbs, R.* (1999) The effect of chemistry on the formation of ultrafine ferrite in steel, ISIJ International, vol. 0, no. 0, pp. 1176-1180, The Iron and Steel Institute of Japan, Japan, Tokyo [C1]
ERA journal ID: 4722 – Scopus EID: Not taggedHodgson, P., Hickson, M.* and Gibbs, R.* (1999) Ultra fine ferrite in low carbon steel, Scripta Materialia, vol. 0, no. 0, pp. 1179-1184, Elsevier Science, USA [C1]
ERA journal ID: 4837 – Scopus EID: Not taggedHodgson, P., Kong, L. and Davies, C.* (1999) The Predication of Hot Strength in Steels with an Integrated Phenomenological and Artificial Neural Network Model., Journal of Materials Processing Technology, vol. 0, no. 0, pp. 1-8, Elsevier, Amsterdam [C1]
ERA journal ID: 3689 – Scopus EID: Not taggedHurley, B.*, Hodgson, P. and Muddle, B.* (1999) Analysis & Characterisation of Ultra-fine Ferrite Produced During a New Steel Strip Rolling Process, Scripta Materialia, vol. 0, no. 0, pp. 433-438, Elsevier Science, USA [C1]
ERA journal ID: 4837 – Scopus EID: Not taggedHusband, S. and Mandal, P. (1999) A conceptual model for quality integrated management in small and medium size enterprises, International Journal of Quality & Reliability Management, vol. 0, no. 0, pp. 699-713, MCB University Press, Bradford, UK [C1]
ERA journal ID: 19355 – Scopus EID: Not taggedKong, L. and Hodgson, P. (1999) The Application of Constitutive and Artificial Neural network Models to Predict the Hot Strength of Steels., ISIJ International, vol. 0, no. 0, pp. 991-998, ISIJ, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: Not taggedKong, L., Hodgson, P. and Wang, B. (1999) Development of Constitutive Models for Metal Forming with Cyclic Strain Softening, Journal of Materials Processing Technology, vol. 0, no. 0, pp. 44-50, Elsevier, Amsterdam [C1]
ERA journal ID: 3689 – Scopus EID: Not taggedLi, L., Barry, D.*, Morris, K.* and Stagnitti, F. (1999) CXTANNEAL: an improved program for estimating solute transport parameters, Environmental Modelling & Software, vol. 0, no. 0, pp. 607-611, Elsevier Science Ltd, Oxford, UK [C1]
ERA journal ID: 4673 – Scopus EID: Not taggedLi, L., Barry, D.*, Stagnitti, F. and Parlange, J.* (1999) Tidal along-shore groundwater flow in a coastal aquifer, Environmental Modelling & Assessment, vol. 0, no. 0, pp. 179-188, Baltzer Science publishers BV, Bussumi, Netherlands [C1]
ERA journal ID: 4672 – Scopus EID: Not taggedLiu, R.*, Wang, C.* and Bathgate, R. (1999) Fracture analysis of cracked Macadamia nutshells under contact load between two rigid plates, Journal of Agricultural and Engineering Research, vol. 0, no. 0, pp. 243-250, Academic Press Ltd, UK [C1]
ERA journal ID: 3455 – Scopus EID: Not taggedLiu, R., Wang, C.* and Bathgate, R. (1999) Crack closure in spherical shells, International Journal of Fracture, vol. 0, no. 0, pp. 307-323, Kluwer Academic Publishers, Netherlands [C1]
ERA journal ID: Not matching ERA journal listLong, J., Finlayson, T.* and Mernagh, T.* (1999) Materials analysis of Yttrium-Barium-Copper-Oxide by Micro-Raman Spectroscopy and Optical Microscopy, IEEE Transactions on Applied Superconductivity, vol. 0, no. 0, pp. 1816-1819, Institute of Electrical and Electronics Engineers, New York [C1]
ERA journal ID: 4442 – Scopus EID: Not taggedLove, P., Mandal, P. and Li, H.* (1999) Determining the Causal Structure of Rework Influences in Contstruction, Construction Management and Economics, vol. 0, no. 0, pp. 505-517, E&FN Spon, London [C1]
ERA journal ID: 40432 – Scopus EID: Not taggedMandal, P., Shah, K., Love, P. and Li, H.* (1999) The Diffusion of Quality in Australian Manufacturing, International Journal of Quality & Reliability Management, vol. 0, no. 0, pp. 575-590, MCB University Press, Bradford, UK [C1]
ERA journal ID: 19355 – Scopus EID: Not taggedPereloma, E.*, Timokhina, I.* and Hodgson, P. (1999) Transformation behaviour in thermomechanically processed C-Mn-Si TRIP steels with and without Nb, Materials Science and Engineering, vol. 0, no. 0, pp. 448-452, Elsevier Science, SA, Amsterdam [C1]
ERA journal ID: 4973 – Scopus EID: Not taggedStagnitti, F., Li, L., Allinson, G., Phillips, I.*, Lockington, D.*, Zeiliguer, A.*, Allinson, M., Lloyd-Smith, J. and Xie, M. (1999) A mathematical model for estimating the extent of solute- and water-flux heterogeneity in multiple sample percolation experiments., Journal of Hydrology, vol. 0, no. 0, pp. 59-69, Elsevier Science, Amsterdam, Netherlands [C1]
ERA journal ID: 1949 – Scopus EID: Not taggedStaiger, M.*, Jessop, B.*, Hodgson, P., Brownrigg, A. and Davies, C.* (1999) Effect of nitrogen on formation of martensite-austenite constituent in low carbon steels., ISIJ International, vol. 0, no. 0, pp. 183-190, Iron and Steel Institute of Japan, Japan, Tokyo [C1]
ERA journal ID: 4722 – Scopus EID: Not taggedWang, X. (1999) Recent research on yarn hairiness testing and reduction: Part - reduction of yarn hairiness, Research Journal of Textile and Apparel, vol. 0, no. 0, pp. 1-8, HK Institution of Textile and Apparel, HK [C1]
ERA journal ID: 3546 – Scopus EID: Not taggedWang, X., Huang, W.* and Huang, X.B.* (1999) A study on the formation of yarn hairiness, The Journal of the Textile Institute, vol. 0, no. 0, pp. 555-569, The Textile Institute, Manchester, UK [C1]
ERA journal ID: Not matching ERA journal listWang, X., Huang, W.* and Huang, X.* (1999) Effect of Test Speed and Twist Level on the Hairiness of Worsted Yarns, Textile Research Journal, vol. 0, no. 0, pp. 889-892, TRI (Textile Research Institute), USA, Princeston, NJ [C1]
ERA journal ID: 3629 – Scopus EID: Not taggedWong, S.*, Thomson, P.* and Hodgson, P. (1999) Room temperature deformation & recrystallisation behaviour of lead and lead-tin alloys in torsion & plane strain compression, in Ulrich's (ed.), Materials Science & Technology, vol. 0, no. 0, pp. 689-696, Institute of Materials, London, UK [C1]
ERA journal ID: Not matching ERA journal listXinfeng, L.*, Yingke, T.* and Hu, E. (1999) Study on Long Term Performance of Solar Powered Solid Adsorption Refrigeration System (Part 2), Journal of South China University of Technology, vol. 0, no. 0, pp. 25-30, South China University of Technology , China [C1]
ERA journal ID: Not matching ERA journal listXinfeng, L.*, Yingke, T.* and Hu, E. (1999) Experiments on Adsorptive Properties of Activated Carbon 207E4-Methanol and its Data Processing, Journal of South China University of Technology, vol. 0, no. 0, pp. 104-110, South China University of Technology, China [C1]
ERA journal ID: Not matching ERA journal listXinfeng, L.*, Yingke, T.* and Hu, E. (1999) Study on Long Term Performance of the Solar-Powered Solid Adsorption Refrigeration System (Part 1), Journal of South China University of Technology, vol. 0, no. 0, pp. 37-43, South China University of Technology, China [C1]
ERA journal ID: Not matching ERA journal listYing, Y.* and Hu, E. (1999) Thermodynamic advantages of using solar energy in the regenerative Rankine power plant, Applied Thermal Engineering, vol. 0, no. 0, pp. 1173-1180, Pergamon, United Kingdom [C1]
ERA journal ID: 3658 – Scopus EID: Not taggedPalmer, Stuart (1999) Engineering management studies as part of continuing engineering education, International journal of continuing engineering education and life-long learning, vol. 9, no. 2, pp. 128-137, Inderscience Publishers, Olney, England [C1.1]
ERA journal ID: 20661 – Scopus EID: Not tagged
Citation counts:Scopus - 2
Wang, X., Chang, L.* and Wang, L.* (1999) Evaluating the relationship between the coefficients of variation of single fibre strength and fibre diameter, The Journal of the Textile Institute, vol. 0, no. 0, pp. 456-458, The Textile Institute, Manchester, UK [C4]
ERA journal ID: Not matching ERA journal listBalatbat, J., Cardew-Hall, M. and Hodgson, P. (1999) A Systems Approach to Sheet Metal/Tool Surface Interface Incorporating Wear, Tooling 99, pp. 13-18, Institute of Materials Engineering, Melbourne [E1]
Baliga, B., Hodgson, P. and Doyle, E.* (1999) Effect of contact length in off-round grinding., in J. Wang, W. Scott and L. Zhang (eds), ABTEC 99, pp. 116-123, World Scientific Publishing Co, Singapore [E1]
Baliga, B., Hodgson, P. and Doyle, E.* (1999) Analysis of Punch Grinding Tools,, Tooling 99, pp. 7-11, Institute of Materials Engineering, Melbourne [E1]
Barnett, M. (1999) Some Distinctive Aspects of the Metallurgy of Warm Rolled Steel Strip, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999-Materials Processing., pp. 103-108, Institute of Materials Engineering, Melbourne [E1]
Crawford, B., Corbett, T., Scott, M. and Kelly, G. (1999) The Fatigue Behaviour of an Ultra-Fine Ferrite Steel, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 "Materials Processing" Proceedings, pp. 127-132, IMEA, Melbourne [E1]
Doolan, M.*, Kalyanasundaram, S.*, Hodgson, P. and Cardew-Hall, M. (1999) Identifying-variation in sheet metal forming, in M. Geiger, H. Kals, B. Shirvani & U. Singh (eds), The International Conference on Sheet Metal, SHEMET 99, pp. 117-124, Meisenbach Bamberg, Germany [E1]
Ferguson, C. and Florance, J. (1999) Internet Access to a Flexible Manufacturing Cell, in Dr M Saadat and Professor S Nahavandi (eds), Second World Manufacturing Congress 1999 International Symposia on Manufacturing Systems ISMS 99, pp. 25-30, Internat'nal Computer Sc Conventions Acad Press, Canada/Switzerland [E1]
Gunn, B. and Nahavandi, S. (1999) Utilising Computer Simulation Analysis to Improve Forging Delivery Performance, in Ebrahim Shayan (ed.), 26th International Conference on Computers and Industrial Engineering, pp. 649-654, IRIS, Melbourne [E1]
Haynes, D., Barnett, M. and Hodgson, P. (1999) The Production of Zincanneal Coated Steels for Sheet Metal Forming, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999: Materials Processing, pp. 133-138, Institute of Materials Engineering, Melbourne [E1]
Hodgson, P. (1999) Recent Developments in the Thermomechanical Processing of Steel, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 Materials Processing, pp. 87-94, Institute of Materials Engineering, Melbourne [E1]
Hosking, T., Hill, B. and Hodgson, P. (1999) Shrinkage porosity assessment and minimisation in a grey iron casting., in EV Pereloma and GH Edward (eds), Materials Research Forum 1999, pp. 29-34, The Institute of Materials Engineering, North Melbourne, Victoria [E1]
Hu, E. and You, Y.* (1999) A cleaner way for power generation-integrate solar energy into conventional rekine cycle, International Conference on Cleaner Production and Sustainable Development 1999, pp. 215-222, Foundation of Taiwan Industry Service, Taiwan [E1]
Hu, E. and You, Y.* (1999) A new solar adsorption refrigeration system working around the atmospheric pressure and its thermodynamic analyses, in Mustafa Isreb (ed.), First International Power & Energy Conference, pp. 445-450, Monash University, Clayton, Victoria [E1]
Hu, E. and You, Y.* (1999) Mass Transfer Analysis of New Solar Adsorption Refrigeration Systems Working at about Atmospheric Pressure, in Graham Thorpe (ed.), Solar '99. 37th Annual Conference of the ANZSS, Australian and New Zealand Solar Energy Society, Geelong, Victoria, Australia [E1]
Kelly, G. and Hodgson, P. (1999) Comparison of Static and Metadynamic Recrystallisation in Plain Carbon Steet, in EV Pereloma and GH Edward (eds), Materials Research Forum 1999 "Materials Processing" Proceedings, pp. 115-120, IMEA, Melbourne [E1]
Mandal, P. and Brownrigg, A. (1999) Developing professional leadership through a Doctor of Technology Program, in T. Jones, B. Chaney and D. Douglas (eds), Proceedings of the 1999 Annual Meeting of Decision Sciences Institute, pp. 112-114, Decision Science Institute, New Orleans, USA [E1]
Martin, D.*, Mantyla, P.* and Hodgson, P. (1999) An analysis of friction in finish rolling of hot steel strip, Modelling of Metal Rolling Processes 3, pp. 150-159, The Institute of Materials, London, UK [E1]
Murphy, A.*, Cardew-Hall, M.*, Hodgson, P. and Kalyanasundaram, S.* (1999) Novel criteria and tools for the Fe optimization of the sheet metal forming process, in J. Gelin & P. Picart (eds), Nummisheet, 4th International Conference on Numerical Simulation of 3D sheet forming processes, pp. 305-310, University of Franche-Comte & Ensmm, France [E1]
Nahavandi, S. (1999) On design and development of a Multi-finger Robot Hand, in S. Nahavandi & M. Saadat (eds), Proceedings of the 2nd World Manufacturing Congress, pp. 551-557, ICSC Academic Press, England [E1]
Nahavandi, S. (1999) A Simulation Package for FMS Control, in S. Nahavandi & M. Saadat (eds), Proceedings of the 2nd World Manufacturing Congress, pp. 179-185, ICSC Academic Press, England [E1]
Nahavandi, S. (1999) Closed Loop Programmable Mechanisms in Robot Design, in S. Nahavandi & M. Saadat (eds), Proceedings of the 2nd World Manufacturing Congress, pp. 558-565, ICSC Academic Press, England [E1]
Palmer, S. and Tulloch, W. (1999) The evolution of on-line teaching and learning in Engineering at Deakin University, in Professor Lee Luong (ed.), 11th Australasian Conference on Engineering Education, pp. 85-90, University of South Australia, Adelaide [E1]
Palmer, S. (1999) A comparision of on- and off-campus student computer usage in engineering and technology education, in Zenon J. Pudlowski (ed.), Second Asia - Pacific Forum on Engineering and Technology Education, pp. 128-132, UNESCO International Centre for Engineering Ed, Melbourne, Australia [E1]
Palmer, S. (1999) The inflexibilities of flexible teaching and learning in Engineering and Technology, in Z.J. Pudlowski and D.Q. Nguyen (eds), Second UICEE Annual Conference on Engineering Education, pp. 158-162, UICEE International Centre for Engineering Ed, Melbourne, Australia [E1]
Pereloma, E.*, Timokhina, I.* and Hodgson, P. (1999) TEM Characterisation of Microstructures Formed in Discontinuously Cooled C-Mn-Si (-Nb) Steels, in M. Koiwa, K. Otsuka and T. Miyazaki (eds), Solid-Solid Phase Transformations PTM '99, pp. 1513-1516, The Japan Institute of Metals Proceeding, Japan [E1]
Ping, L.*, Xin-Feng, L.*, Yingke, T.* and Hu, E. (1999) Investigation of condensing heat transfer enhancement of the inside and outer triangle finned tube with small spiral angles, in Mustafa Isreb (ed.), First International Power & Energy Conference, pp. 467-471, Monash University, Clayton, Victoria [E1]
Ping, L.*, Xin-Feng, L.* and Hu, E. (1999) Simulation and optimium of condensing heat transfer of the inside and outer triangle finned tube with small spiral angles, in Mustafa Isreb (ed.), First International Power & Energy Conference, pp. 491-495, Monash University, Clayton, Victoria [E1]
Savage, S., Kershaw, D. and Hodgson, P. (1999) Lubrication Coating Evaluation Technique for a Cold Heading Operation, in J.W.H. Price (ed.), Tooling 99, pp. 55-60, Institute of Materials Engineering, Melbourne [E1]
Ying, Y.* and Hu, E. (1999) Investigation on the Optimum Efficiency for a Solar Thermal Power System, in Graham Thorpe (ed.), Solar '99. 37th Annual Conference of the ANZSS, Australian and New Zealand Solar Energy Society, Geelong, Victoria, Australia [E1]
You, Y.* and Hu, E. (1999) A power cycle proposed for using low-temperature thermal energy, in Mustafa Isreb (ed.), First International Power & Energy Conference, pp. 355-358, Monash University, Clayton, Victoria [E1]
Zhang, S., Hodgson, P., Cardew-Hall, M. and Kalyanasundaram, S.* (1999) Finite Element Modelling of Sheet Metal Forming, in J.W.H. Price (ed.), Tooling 99, Institute of Materials Engineering, Melbourne [E1]
Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kambayashi, Y.* (1999) The Finite Element Simulation of Metal Forming with Improved Constitutive Equation for Local Contact., in D. Ho (ed.), The Thirteenth Australasian Compumod Users' Conference, pp. 1-19, Compumod Pty Ltd, Australia [E1]
Zou, L. (1999) An integrated approach to minimise the environmental impact of dust emission from brown coal fired power station: A case study in LaTrobe Valley, in Mustafa Isreb (ed.), First International Power & Energy Conference, pp. 109-112, Monash University, Clayton, Victoria [E1]
Cardew-Hall, M.*, Scott-Murphy, A.*, Hodgson, P. and Kalyanasundaram, S.* (1999) FEM Optimisation of sheet metal formings, in M. Demeri (ed.), Sheet metal forming technology, pp. 77-91, TMS, Pennsylvania [E2]
Hodgson, P. and Mandal, P. (1999) A systems approach to rod and bar processing, in D. Kanagy (ed.), 41st Mechanical Working and Steel processing Conference, pp. 159-170, Iron and Steel Society, Warrendale, PA [E2]
Hu, E. (1999) Solar Refrigeration: A Challenge in Solar Thermal Applications , in A. Zahedi (ed.), Renewable Energy Workshop '99, pp. 141-148, Monash University, Australia [E2]
Kong, L. and Hodgson, P. (1999) Improving the Prediction Accuracy of Constitutive Model with ANN Models, 2nd International Conference on Intelligent Processing and Manufacturing of Materials (IPMM 99), pp. 389-394, IEEE, Vancouver [E2]
Kong, L., Hodgson, P., Lin, L. and Wang, B. (1999) Material Properties under Drawing and Extrusion with Cyclic Torsion, 2nd International Conference on Intelligent Processing and Manufacturing of Materials (IPMM 99), pp. 953-958, IEEE, Vancouver [E2]
Kong, L., Hodgson, P., Um, K. and Wang, B. (1999) Effect of modelling accuracy of hot strength on hot rolling, in J.H. Beynon et al (ed.), Modelling of Metal Rolling Processes 3, pp. 116-122, 10M Communications Ltd, London, UK [E2]
Lin, L., Bathgate, R., Kong, L., Hodgson, P., Wang, B. and Lu, G.* (1999) The Effect of Die Design on the Extrusion with Combined Torsion, in J.W.H. Price (ed.), Tooling '99, pp. 45-49, Institute of Materials Engineering Australasia Ltd, Melbourne [E2]
Wong, K., Ferguson, C., Florance, J., Baliga, B. and Jones, T. (1999) Flexible Delivery of Practical Learning Experience Through the Internet : The Remotely Operated CNC Machine Teaching Project, Forum of the Open and Distance Learning Association of Australia., pp. 523-531, Deakin University, Australia [E2]
Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kalyanasundaram, S.* (1999) The Finite Element Simulation of Sheet Metal Forming with Local Friction Model, in M.H. Hanza (ed.), Proceedings of the IASTED International Conference Applied Modelling and Simulation., pp. 479-484, International Association of Science and Technology for Development/Acta Press, Anaheim, CA [E2]
Zou, L. and Hooper, M.* (1999) Airborne particulate matter and contributing sources in Central Jakarta, in R.J. de Dear and J.C. Potter (eds), 15th International Congress of Biometeorology & International Conference on Urban Climatology, pp. 1-7, Macquarie University, Sydney [E2]
Pereloma, E.*, Timokhina, I. and Swenser, S.* (1999) Crystallography of Cementite in Tempered Fe-Ni-C alloys, in M. Koiwa, K. Otsuka and T. Miyazaki (eds), Solid - Solid Phase Transformation PTM '99, pp. 201-204, The Japan Institute of Metals Proceeding, Japan [EN]
Hickson, M., Hurley, P.*, Kelly, G., Hodgson, P. and Barnett, M. (1999) Formation of Ultra-Fine Grained Steels, Proceedings of the Second Symposium on Super Metal, pp. 203-213, JRCM, Tokyo, Japan [L2]
Kong, L. and Hodgson, P. (1999) Constitutive Analysis of Flow Strength of Austenitic Steels with the Integration of ANN Models, Progress in Mechanical Behaviour of Materials, Proceedings of the 8th Conference on the Mechanical Behaviour of Materials (ICM8), pp. 1071-1076, Fleming Printing Ltd, Victoria, Canada [L2]
Kong, L.X. and She, F.H. (1999) Development of an online quality control system for textile manufacturing, ATC 99. Proceedings of the 5th Asian Textile Research Conference, held Kyoto Research Park, Kyoto, Japan, 30 September - 2 October 1999. Diversity in harmony., pp. 1024-1027, FAPTA, Kyoto, Japan [L2]
Kong, L., Li, L., Hodgson, P. and Wang, B. (1999) Behaviour of Materials under Combined Extrusion and Cyclic Torsion, Progress in Mechanical Behaviour of Materials, Proceedings of the 8th Conference on the Mechanical Behaviour of Materials (ICM8), pp. 195-200, Fleming Printing Ltd, Victoria, Canada [L2]
Kong, Lingxue, She, Mary F. H., Tung, Kuo-Lun and Lu, W.M.* (1999) FEM investigation of heat transfer through fibre, yarns and fabrics, Proceedings ATC '99, the 5th Asian Textile Conference : Diversity in harmony: Asian textile in the 21st century September 30-October 2, 1999., pp. 125-128, The Conference, Kyoto, Japan [L2]
Nguyen, B., Gupta, H. and Faniran, S. (1999) Waste Minimisation strategies in the construction industry- A Geelong Case Study, Young Waste Professionals Conference, NSW Waste Board, Sydney [L2]
She, F.H., Chow S., Wang, B., Bathgate, R. and Kong, L.X. (1999) Animal fibre identification using image processing and artificial neural networks, ATC 99. Proceedings of the 5th Asian Textile Research Conference, held Kyoto Research Park, Kyoto, Japan, 30 September - 2 October 1999. Diversity in harmony., pp. 99-102, FAPTA, Kyoto, Japan [L2]
She, F.H., Chow, S., Wang, B and Kong, L.X. (1999) An artificial neural network model to predict the visual distinction between dyed fabrics, ATC 99. Proceedings of the 5th Asian Textile Research Conference, held Kyoto Researcg Park, Kyoto, Japan, 30 September - 2 October 1999. Diversity in harmony., FAPTA, Kyoto, Japan [L2]
Tracey, A., White, R. and Gupta, H. (1999) Minimising waste effluent disposal to sewer: a case study at an integrated textile facility (The International Fibre Centre), Young Waste Professionals Conference, pp. 1-7, NSW Waste Board, Sydney [L2]
Wang, L.* and Wang, X. (1999) FFT Analysis of Fibre Tension during Simulated Fibre Opening Process, The 5th Asian Textile Conference, pp. 1052-1055, FAPTA, Japan [L2]
Wang, X. and Wang, L.* (1999) Effect of Fibre Compression on Wool Fibre Diameter, The 5th Asian Textile Conference, pp. 1229-1232, FAPTA, Japan [L2]
Zhang, Y. and Wang, X. (1999) The Diameter Irregularity of Processed Wool and its Effect on Fibre Strength Variation, The 5th Asian Textile Conference, pp. 741-744, FAPTA, Japan [L2]
She, Mary F.H., Chou, S., Wang, B. and Kong, L. (1999) An Artificial Neural Network Model to Predict the Visual Distinction between Dyed Fabrics, The 5th Asian Textile Conference (ATC5), p. 301, Federation of Asian Professional Textile Associati, Kyoto, Japan [L3]
Nahavandi, S. and Saadat, M.* (1999) Proceedings of the 2nd World Manufacturing Congress, Porceedings of the 2nd World Manufacturing Congress, pp. 834-838, ICSC Academic Press, England [M]
Grants and Consultancies
Grants with funding during 1999
Research Income - National Competitive Grants
Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]
- 2002: $11,386
- 2001: $2,072
- 2000: $21,869
- 1999: $21,080
Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]
- 2002: $11,386
- 2001: $22,545
- 2000: $21,869
- 1999: $24,980
Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]
- 2001: $55,968
- 2000: $138,245
- 1999: $133,344
- 1998: $90,222
Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]
- 2001: $54,884
- 2000: $58,890
- 1999: $60,932
Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]
- 2001: $54,884
- 2000: $53,724
- 1999: $55,855
Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]
- 1999: $17,000
Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]
- 1999: $15,000
Research Income - Other Public Sector Funding
Tracey, A. Scholarship Income [U]
- 2000: $6,800
- 1999: $8,400
Research Income - Industry and Other Funding
Hodgson, P. Stamping Technology for Automotive Processes [V]
- 2000: $35,000
- 1999: $25,000
- 1998: $25,000
- 1997: $25,000
Hodgson, P. Stamping Technology for Automotive Processes [V]
- 2000: $12,500
- 1999: $62,500
- 1998: $150,000
- 1997: $75,000
Hodgson, P. Stamping Technology for Automotive Processes [V]
- 2000: $25,000
- 1999: $25,000
- 1998: $25,000
Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]
- 2000: $10,000
- 1999: $10,000
- 1998: $20,000
Roche, D. Scholarship Income [V]
- 2000: $37,500
- 1999: $22,500
Hodgson, P. Stamping technology for Automotive Processes [V]
- 2000: $50,000
- 1999: $100,000
Hodgson, P. Stamping Technology for Automotive Processes [V]
- 1999: $61,250
- 1998: $8,750
- 1997: $26,250
Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]
- 1999: $55,000
- 1998: $110,000
Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]
- 1999: $25,000
- 1998: $55,800
Nahavandi, S. Braeside Project 2 - Factory Modelling [V]
- 1999: $28,000
- 1998: $78,800
Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]
- 1999: $25,000
- 1998: $5,600
Research Income - Industry and Other Funding - Australian
Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]
- 2005: $50,000
- 2004: $50,000
- 2003: $50,000
- 2002: $50,000
- 2001: $125,000
- 2000: $175,000
- 1999: $200,000
Higher Degree by Research Completions
1999 - Doctor of Philosophy
Rong Liu. Supervisor: Robert Bathgate
Thesis entitled: Fracture Analysis of Spherical Shells.1999 - Doctor of Technology
David Dombkins. Supervisor: Peter Hodgson
Thesis entitled: PROJAM: The Management of Complex Projects and Programs.1999 - Master of Engineering
Matthew Joordens. Supervisor: L Baker
Thesis title not available.1999 - Master of Science
Joseph Lanzon. Supervisor: Peter Hodgson
Thesis entitled: Evaluating Lubricants in Sheet Metal Forming.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Tuesday 18th June 2013 10:04pm
