Research Services Division

Deakin Research

2000 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Barnett, M. (2000) Improving the r-value of Warm Rolled and Annealed Low Carbon Steel by Adding Chromium, Steel Research, vol. 0, no. 0, pp. 295-302, Verlag Stahleisen, Germany [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Barnett, M. and Kestens, L.* (2000) STRENGTHENING THE {111} TEXTURE IN STEEL SHEET BY INCREASING THE LEVEL OF SOLUTE CARBON DURING COLD ROLLING, Textures and Microstructures, vol. 0, no. 0, pp. 1-22, Gordon and Breach Publishing, Lausanne [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Barnett, M., Kelly, G. and Hodgson, P. (2000) PREDICTING THE CRITICAL STRAIN FOR DYNAMIC RECRYSTALLIZATION USING THE KINETICS OF STATIC RECRYSTALLIZATION, Scripta Materialia, vol. 0, no. 0, pp. 365-369, Elsevier Science, Oxford [C1]
ERA journal ID: 4837 – Scopus EID: Not tagged
no DRO entry yet for this publication

Briggs, H. and Hodgson, P. (2000) The Changing Culture and Practice of Undergraduate Engineering Education in Australia, British Journal of Engineering Education, vol. 0, no. 0, pp. 31-41, Sheffied Hallam University Press, Sheffied [C1]
ERA journal ID: 40986 – Scopus EID: Not tagged
no DRO entry yet for this publication

Gunn, B. and Nahavandi, S. (2000) Determining the optimum level of work in progress using constraint analysis and computer simulation, Assembly Automation: The International Journal of Assembly Technology and Management, vol. 0, no. 0, pp. 305-312, MCB University Press, West Yorkshire, England [C1]
ERA journal ID: 3587 – Scopus EID: Not tagged
no DRO entry yet for this publication

Hodgson, P., Kelly, G. and Barnett, M. (2000) Recent Trends in the Thermomechanical Processing of Steel, Materials Forum: Materials and Processes of the 21st Century, vol. 0, no. 0, pp. 37-48, Institute of Materials Engineering Australasia Ltd, North Melbourne, Victoria, Australia [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hurley, P.*, Muddle, B.* and Hodgson, P. (2000) Microstructure and microtexture of ultrafine ferrite formed in 0.1%C steel using new strip rolling process, Materials Science and Technology, vol. 0, no. 0, pp. 1376-1379, Research Studies Press, UK [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Hurley, P.*, Kelly, G. and Hodgson, P. (2000) Ultrafine ferrite formation during hot strip rolling, Materials Science and Technology, vol. 0, no. 0, pp. 1273-1276, Institute of Materials, United Kingdom [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Khan, Z.* and Wang, X. (2000) Mohair Fibre Drafting in Ring Spinning. Part II: Pinned Roller, The Journal of The Textile Institute, vol. 0, no. 0, pp. 21-27, The Textile Institute, Manchester, UK [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Kong, L. and Platfoot, R.* (2000) Fibre transportation in confined channel with recirculations, Computers and Structures, vol. 0, no. 0, pp. 237-245, Elsevier Science, Oxford [C1]
ERA journal ID: 4176 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Predicting flow strength of austenitic steels with an IPANN model using different training strategies, Advances in Engineering Software, vol. 0, no. 0, pp. 945-954, Elsevier Science, Edinburgh, UK [C1]
ERA journal ID: 22083 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Constitutive modelling of extrusion of lead with cyclic torsion, Materials Science and Engineering, vol. 0, no. 0, pp. 32-38, Elsevier Science, Lausanne [C1]
ERA journal ID: 4973 – Scopus EID: Not tagged
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Collinson, D.* (2000) Extrapolative prediction of the hot strength of austenitic steels with a combined constitutive and ANN model, Journal of Materials Processing Technology, vol. 0, no. 0, pp. 84-89, Elsevier Science, UK [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
no DRO entry yet for this publication

Long, J., Conn, A.*, Batchelor, W.* and Evans, R.* (2000) Comparision of methods to measure fibril angle in wood fibres, Appita Journal, vol. 0, no. 0, pp. 206-209, Pulp & Paper Industry Inc., Carlton, Victoria [C1]
ERA journal ID: 4869 – Scopus EID: Not tagged
no DRO entry yet for this publication

Ma, X., Wang, B.*, Kong, L. and Barnett, M. (2000) FEM Simulation of Torsion Tests for Pre-Deformed Lead with Work-Softening, Key Engineering Materials, vol. 0, no. 0, pp. 407-412, Trans Tech Publications, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: Not tagged
no DRO entry yet for this publication

Mandal, P., Love, P., Sohal, A.* and Bhadury, B.* (2000) The propagation of quality management concepts in the Indian manufacturing industry: some empirical observations, The Total Quality Management (TQM) Magazine, vol. 0, no. 0, pp. 205-213, MCB University Press, West Yorkshire, England [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Mandal, P. and Baliga, B. (2000) MIS-user interface design for job shop manufacturing environment, International Journal of Operations & Production Management, vol. 0, no. 0, pp. 468-480, MCB University Press, West Yorkshire, England [C1]
ERA journal ID: 19334 – Scopus EID: Not tagged
no DRO entry yet for this publication

McLean, B.*, Baskaran, K. and Connor, M.* (2000) The use of algal-bacterial biofilms to enhance nitrification rates in lagoons: experience under laboratory and pilot-scale conditions, Water Science and Technology, vol. 0, no. 0, pp. 187-194, IWA Publishing, London, UK [C1]
ERA journal ID: 4696 – Scopus EID: Not tagged
no DRO entry yet for this publication

Norman, S.* and Wang, X. (2000) Modified Two-strand Spinning. Part 11: Geometry, Research Journal of Textile and Apparel, vol. 0, no. 0, pp. 1-9, Hong Kong Institution of Textile and Apparel, Hong Kong [C1]
ERA journal ID: 3546 – Scopus EID: Not tagged
no DRO entry yet for this publication

Norman, S.* and Wang, X. (2000) Modified Two-Strand Spinning. Part 1: Theory, Research Journal of Textile and Apparel, vol. 0, no. 0, pp. 1-9, Hong Kong Institution of Textile and Apparel, Hong Kong [C1]
ERA journal ID: 3546 – Scopus EID: Not tagged
no DRO entry yet for this publication

Palmer, S. (2000) Considerations in the design of undergraduate technology management programs for flexible learning - the case of engineering management, Business, Education and Technology Journal, vol. 0, no. 0, pp. 40-45, BETJournal, San Francisco CA [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Pan, N.*, Lin, Y.*, Wang, X. and Postle, R.* (2000) An Oblique Fiber Bundle Test and Analysis, Textile Research Journal, vol. 0, no. 0, pp. 671-674, Textile Research Institute, Princeton, New Jersey, USA [C1]
ERA journal ID: 3629 – Scopus EID: Not tagged
no DRO entry yet for this publication

Wang, L.* and Wang, X. (2000) A Study of Wool's Tensile Strength in Early Stage Processing, Textile Research Journal, vol. 0, no. 0, pp. 98-102, Textile Research Institute, New Jersey, USA [C1]
ERA journal ID: 3629 – Scopus EID: Not tagged
no DRO entry yet for this publication

Wang, X. and Khan, Z.* (2000) Mohair Fibre Drafting in Ring Spinning. Part 1: Pinned Apron, The Journal of The Textile Institute, vol. 0, no. 0, pp. 16-20, The Textile Institute, Manchester, UK [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Wang, X. (2000) Predicting the Strength Variation of Wool from Its Diameter Variation, Textile Research Journal, vol. 0, no. 0, pp. 191-194, Textile Research Institute, New Jersey, USA [C1]
ERA journal ID: 3629 – Scopus EID: Not tagged
no DRO entry yet for this publication

Zhang, Y. and Wang, X. (2000) The Effect of Along-fibre Diameter Variation on Fibre Tensile Behaviour, Wool Technology and Sheep Breeding, vol. 0, no. 0, pp. 303-312, WRONZ, Christchurch, New Zealand [C1]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Palmer, Stuart (2000) On- and off-campus computer usage in engineering education, Computers & Education, vol. 34, no. 2, pp. 141-154, Elsevier Science, Oxford, England [C1.1]
ERA journal ID: 17811 – Scopus EID: 2-s2.0-0005634204
Citation counts: Scopus - 13, Thomson - 7
DRO entry for this publication

Palmer, Stuart (2000) Student responses to activities designed to develop generic professional skills, Journal of professional issues in engineering education & practice, vol. 126, no. 4, pp. 180-185, American Society of Civil Engineers, Reston, Va. [C1.1]
ERA journal ID: 4362 – Scopus EID: 2-s2.0-0034299022
Citation counts: Scopus - 11, Thomson - 5
DRO entry for this publication

Palmer, Stuart (2000) Management education in Australian engineering undergraduate courses, Engineering management journal, vol. 12, no. 3, pp. 3-9, American Society for Engineering Management, Rolla, Mo. [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 9
DRO entry for this publication

Spratt, Christine, Palmer, Stuart and Coldwell, Jo (2000) Using technologies in teaching : an initiative in academic staff development, Journal of educational technology & society, vol. 3, no. 3, pp. 455-461, International Forum of Educational Technology & Society, Palmerston North, N.Z. [C1.1]
ERA journal ID: 20269 – Scopus EID: 2-s2.0-0012673396
Citation counts: Scopus - 8
DRO entry for this publication

Kouzani, A.Z., Nahavandi, S., Kong, L.X. and She, F.H. (2000) Pixel-based correspondence for facial images, International Journal of Images and Graphics, vol. 5, pp. 338-341, World Scientific, Singapore ; River Edge, NJ [C3]
ERA journal ID: 10381 – Scopus EID: Not tagged
DRO entry for this publication

Pack, D., Chesnoy, A.*, Bromly, J.* and White, R. (2000) Formation of elemental sulphur in natural gas transmission pipelines, The Australian Pipeliner, vol. 0, no. 0, pp. 51-53, Pipeline Publications, Victoria [C3]
ERA journal ID: Not matching ERA journal list
no DRO entry yet for this publication

Abachi, H.*, Lisner, R.* and Nahavandi, S. (2000) Design Methodology of a Multi-Multiprocessor Superhypercube Architecture in Distributed Manufacturing Systems, in Mo Jamshidi, Pierre Borne, Tony Maciejewski, Saeid Nahavandi, Ron Lumia, Madjid Fathi, Takeshi Furuhashi (eds), World Automation Congress: Seventh International Symposium on Manufacturing with Applications, pp. 1-6, TSI Press, New Mexico, USA [E1]
no DRO entry yet for this publication

Abachi, H.*, Nahavandi, S. and Abdollahian, M.* (2000) Productivity Management of Flexible Manufacturing Systems Using Advanced Parallel Computer Architecture, in G. Altmann, J. Lamp, P. Love, P. Mandal, R. Smith and M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 28-31, Deakin University, Geelong, Australia [E1]
no DRO entry yet for this publication

Abdollahian, M.*, Abachi, H.* and Nahavandi, S. (2000) APPLICATION OF UNIVARIATE AND MULTIVARIATE PROCESS CONTROL PROCEDURES IN INDUSTRY, in G. Altmann, J. Lamp, P. Love, P. Mandal, R. Smith & M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 32-37, Deakin University, Geelong, Australia [E1]
no DRO entry yet for this publication

Baliga, B. and Mandal, P. (2000) Systems Approach to Off-Round Grinding, in G. Altmann, J. Lamp, P. Love, P. Mandal, R. Smith and M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 77-82, Deakin University, Geelong, Victoria [E1]
no DRO entry yet for this publication

Baskaran, K., Fleerakkers, A.*, Meijers, K.* and Gersting, D.* (2000) Effect of incubation depth on ammonia nitrogen removal rates in algal-bacterial biofilms, in WaterTECH (ed.), ENVIRO 2000: Towards Sustainability, pp. 1-8, Enviro 2000, Sydney [E1]
no DRO entry yet for this publication

Campbell, P.*, Cardew-Hall, M.* and Hodgson, P. (2000) PRODUCTION DECISIONS AND LOT SIZING INCORPORATING RANDOM MACHINE FAILURES, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Cardew-Hall, M.*, Gresham, R.*, Hodgson, P. and Smith, J.* (2000) KNOWLEDGE CAPTURE SYSTEM FOR SHEET METAL FORMING PROBLEMS, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Doolan, M., Kalyanasundaram, S.*, Hodgson, P. and Cardew-Hall, M.* (2000) IDENTIFYING THE CAUSE OF VARIATION IN SHEET METAL STAMPING, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Fabijanic, D., Barnett, M., Hodgson, P. and Cardew-Hall, M.* (2000) Improving the Galling resistance of automotive stamping tools, in M. Pietrzyk, J. Kusiak and J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 641-646, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Gunn, B. and Nahavandi, S. (2000) AUTOMATIC PREDICTION OF THE OPTIMAL WORK IN PROGRESS LEVEL FOR BATCH MANUFACTURING, in F. Naghdy, F. Kurfess, H. Ogata, E. Szczerbicki, H. Bothe, H. Tianfield (eds), Proceedings of the ICSC Symposia on INTELLIGENT SYSTEMS & APPLICATION (ISA'2000), pp. 760-766, ICSC Academic Press, Canada / Switzerland [E1]
no DRO entry yet for this publication

Hodgson, P. and Barnett, M. (2000) The thermomechanical processing of steels - Current status and future trends, in M. Pietrzyk, J. Kusiak and J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 21-28, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

Hu, E. and You, Y.* (2000) SOLAR ADSORPTION ICE MAKING - AN IDEAL SUPPLEMENT TO THE ICE STORAGE AIR CONDITIONING SYSTEMS, in Long Weiding - Executive Director (ed.), ACHRB '2000 International Symposium on Air-Conditioning in High-Rise Buildings '2000, pp. 484-488, ACHRB'2000, China [E1]
no DRO entry yet for this publication

Kong, L., Nahavandi, S. and Baliga, B. (2000) PARAMETRICAL INVESTIGATION OF HIGH PRESSURE DIE CASTING PROCESS, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, pp. 1-5, Causal Productions/Institution of Engineers Australia, Sydney, Australia [E1]
no DRO entry yet for this publication

Kong, L., Nahavandi, S., Baliga, B. and Kouzani, A. (2000) Application of Image Processing in Analysing HPDC Thermal Images, in Xu Guan hua (ed.), Journal of Image and Graphics: Proceedings of ICIG' 2000, pp. 269-272, Publishing Board of JIG, Beijing, China [E1]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Prediction of deformation force at different strains during steel rolling, in M. Pietrzyk, J. Kusiak, J. Majta, P. Hartley, I. Pillinger (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 263-267, Balkema, Rotterdam, Rotterdam [E1]
no DRO entry yet for this publication

Kong, L., Hodgson, P. and Nahavandi, S. (2000) Development of an Intelligent Decision Support System for Metal Forming Industry, in G. Altmann, J. Lamp, P. Mandal, R. Smith & M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 306-311, Deakin University, Geelong, Australia [E1]
no DRO entry yet for this publication

Kong, L., Wang, B.* and Lu, G. (2000) Experimental and Computational Characterising Method for Thin Film Coating, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Kong, L., Wang, B.*, Lu, G.* and Ma, X. (2000) Computational Characterising of Thin Film Coating, in Professor E.D Doyle (ed.), 12th International Federation for Heat Treatment and Surface Engineering Congress, pp. 223-228, Institute of Materials Engineering Australasia Ltd, Australia [E1]
no DRO entry yet for this publication

Kouzani, A., Nahavandi, S., Kong, L. and She, Mary F.H. (2000) Pixel-Based Correspondence for Facial Images, in Xu Guan hua (ed.), Journal of Image and Graphics: Proceedings of ICIG' 2000, pp. 338-341, Publishing Board of JIG, Beijing, China [E1]
no DRO entry yet for this publication

Kouzani, A. and Nahavandi, S. (2000) Expression Synthesis in Images, in B. Senadji, M. Bennamoun, B. Boashash (eds), Third Australasian Workshop on Signal Processing Applications, Signal Processing Research Centre, QUT, Brisbane, Australia [E1]
no DRO entry yet for this publication

Lloyd, B. and Palmer, S. (2000) A systems approach to the engineering work force, in Altmann, G., Lamp, J., Love, P.E.D., Mandal, P, Smith, R and Warren, M (eds), Proceedings of the International Conference on Systems Thinking in Management, pp. 365-370, Deakin University, Geelong, Victoria [E1]
no DRO entry yet for this publication

Mandal, P., Love, P. and Shah, K. (2000) Quality Costs to Formulate Quality Improvement Strategies, in Samuel K.M. Ho and Chee-Leong Chong (eds), Proceedings of the 5th International Conference on ISO 9000 and TQM, pp. 156-159, School of Business, HKBU , Hong Kong [E1]
no DRO entry yet for this publication

Nahavandi, S., Kouzani, A. and Kong, L. (2000) Application of a Scaled Conjugate Gradient Algorithm for Feed Forward Artificial Neural Networks, in Xu Guan hua (ed.), Journal of Image and Graphics: Proceedings of ICIG' 2000, pp. 273-276, Publishing Board of JIG, Beijing, China [E1]
no DRO entry yet for this publication

Nahavandi, S., Abachi, H.* and Abdollahian, M.* (2000) A TECHNICAL FRAMEWORK FOR A CO-OPERATIVE MANUFACTURING NETWORK, in M. Jamshidi, P. Borne, A. Maciejewski, S. Nahavandi, R. Lumia, M. Fathi, T. Furuhashi (eds), World Automation Congress: Seventh International Symposium on Manufacturing with Applications, pp. 1-7, TSI Press, New Mexico, USA [E1]
no DRO entry yet for this publication

Nahavandi, S. (2000) Electrical Conductivity of Ultrasonically Welded Wire Joints, in M. Jamshidi, P. Borne, A. Maciejewski, S. Nahavandi, R. Lumia, M. Fathi, T. Furuhashi (eds), World Automation Congress: Seventh International Symposium on Manufacturing with Applications, pp. 1-6, TSI Press, New Mexico, USA [E1]
no DRO entry yet for this publication

Nahavandi, S. and Kouzani, A. (2000) DEVELOPMENT OF A ROTARY PNEUMATIC MUSCLE BASED ACTUATOR FOR ANTROPOMORPHIC JOINTS, in A. Knoll (ed.), HUMANOIDS 2000: The First IEEE-RAS International Conference on Humanoid Robots, IEEE, Germany [E1]
no DRO entry yet for this publication

Nahavandi, S. (2000) A Hybrid Control Architecture for a Flexible Manufacturing Control System, in M. Jamshidi, P. Borne, A. Maciejewski, S. Nahavandi, R. Lumia, M. Fathi, T. Furuhashi (eds), World Automation Congress: Seventh International Symposium on Manufacturing with Applications, pp. 1-6, TSI Press, New Mexico, USA [E1]
no DRO entry yet for this publication

Nahavandi, S., Abachi, H.* and Abdollahian, M.* (2000) A Dynamic Decision-Making System for Manufacturing Control, in G. Altmann, J. Lamp, P. Love, P. Mandal, R. Smith and M. Warren (eds), Proceedings of the 1st International Conference on Systems Thinking in Management, pp. 475-480, Deakin University, Geelong, Australia [E1]
no DRO entry yet for this publication

Palmer, S. (2000) Recent developments in management education in Australian engineering undergraduate courses, in Zenon J. Pudlowski (ed.), Third Annual Conference on Engineering Education, pp. 293-297, UICEE, Melbourne [E1]
no DRO entry yet for this publication

Parsons, T. and Nahavandi, S. (2000) Effects of Sensor Location on Monitoring of Load Signatures In Cold Forging Machines, in F. Naghdy, F. Kurfess, H. Ogata, E. Szczerbicki, H. Bothe, H. Tianfield (eds), Proceedings of the ICSC Symposia on INTELLIGENT SYSTEMS & APPLICATION (ISA '2000), pp. 982-987, ICSC Academic Press, Canada / Switzerland [E1]
no DRO entry yet for this publication

Roche, D. and Baskaran, K. (2000) A preliminary investigation of colour removal from dyeing operation wastewater, in WaterTech (ed.), Enviro 2000: Towards Sustainability: WaterTech Conference, pp. 1-7, Enviro 2000, Australia [E1]
no DRO entry yet for this publication

Savage, S., Barnett, M. and Hodgson, P. (2000) Investigation into cold heading lubricants, in M. Pietrzyk, J. Kusiak & J. Majta (eds), Proceedings of the 8th International Conference on Metal Forming 2000, pp. 569-575, Balkema, Rotterdam, Rotterdam, Netherlands [E1]
no DRO entry yet for this publication

White, R., Tracey, A. and Gupta, H. (2000) Minimising effluent disposal to sewer at an integrated textile facility, in WaterTECH (ed.), Enviro 2000: Towards Sustainability: WaterTech Conference, pp. 1-9, Enviro 2000, Sydney [E1]
no DRO entry yet for this publication

White, R. (2000) Industry-university collaboration in research and development: a case study of programs in Thailand and Australia, in Zenon J. Pudlowski (ed.), 2nd Global Congress on Engineering Education, pp. 340-343, UNESCO (UICEE), Australia [E1]
no DRO entry yet for this publication

White, R. (2000) Sustainable engineering: an integrated approach to educating engineers about the environment, in Zenon J. Pudlowski (ed.), 2nd Global Congress on Engineering Education, pp. 89-93, UNESCO (UICEE), Australia [E1]
no DRO entry yet for this publication

You, Y.*, Hu, E., Jarvis, J.* and Ibrahim, Y.* (2000) Heat Transfer Analysis on the Collector of the Solar Adsorption Refrigeration System Working around the Atmospheric Pressure, in Gary B. Brassington and John C. Patterson (eds), 7th Heat and Mass Transfer Australasia, pp. 367-373, Chalkface Press, Cottesloe, Western Australia [E1]
no DRO entry yet for this publication

You, Y.*, Hu, E., Jarvis, J.* and Ibrahim, Y.* (2000) Adsorption Analysis of the New Solar Adsorption Refrigeration System Working at about Atmospheric Pressure, in Gary B. Brassington and John C. Patterson (eds), 7th Heat and Mass Transfer Australasia, pp. 375-381, Chalkface Press, Cottesloe, Western Australia [E1]
no DRO entry yet for this publication

You, Y.*, Hu, E. and Jarvis, J.* (2000) The exergy (availability) analysis on the solar adsorption refrigeration system working around the atmospheric pressure, in David Mills, John M. Bell, Stoynov LA and Prasad KDV Yarlagadda (eds), SOLAR 2000. Proceedings of the 38th Annual Conference of the Australian and New Zealand Solar Energy Society., pp. 340-347, The Australian & New Zealand Solar Energy Society, Brisbane, Australia [E1]
no DRO entry yet for this publication

You, Y.*, Hu, E. and Jarvis, J.* (2000) The energy analysis of the solar adsorption refrigeration system working around the atmospheric pressure, in David Mills, John M. Bell, Stoynov L.A and Prasad KDV Yarlagadda (eds), SOLAR 2000. Proceedings of the 38th Annual Conference of the Australian and New Zealand Solar Energy Society, pp. 332-339, The Australian & New Zealand Solar Energy Society, Brisbane, Australia [E1]
no DRO entry yet for this publication

Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kalyanasundaram, S.* (2000) The Finite Element Simulation of Metal Forming Using Local Contact, in R. Gresham (ed.), ICME 2000: Eighth International Conference on Manufacturing Engineering, Causal Productions/Institution of Engineers Australia, Sydney [E1]
no DRO entry yet for this publication

Zou, L. (2000) Elemental composition and morphology of size-resolved brown coal fly ash particles, in Robina Pub Centre (ed.), 15th International Clean Air & Environment Conference, pp. 428-431, Monash University, Melbourne [E1]
no DRO entry yet for this publication

Lloyd, B. E. and Palmer, S. L. (2000) A systems approach to the engineering workforce, in Altman, Graeme; Lamp, John; Love, Peter E. D.; Mandal, Purnendu; Smith, Ross and Warren, Matthew J. (eds), ICSTM 2000 : Proceedings of the International Conference on Systems Thinking in Management, pp. 365-370, Deakin University, Geelong, Vic. [E1.1]
DRO entry for this publication

Baliga, B., Nahavandi, S. and Kong, L. (2000) CYCLE TIME REDUCTION IN HIGH PRESSURE DIE CASTING, 2000 Pacific Conference on Manufacturing, pp. 500-505, Lawrence Technological University, USA [E2]
no DRO entry yet for this publication

Barnett, M., Kelly, G. and Hodgson, P. (2000) Predictions of Dynamic Recrystallization in Aluminium Based on Static Recrystallization Data, in J. Kazadi and J. Masounave (eds), 39th Annual Conference of Metallurgists of CIMProceedings of the International Symposium on Light Metals, pp. 439-452, Canadian Institute of Mining, Metallurgy and Petro, Canada [E2]
no DRO entry yet for this publication

Barnett, M. (2000) Shear Bands and Recrystallization Textures in Steel, in S. Yue and E. Es-sadiqi (eds), 39th Annual Conference of Metallurgists of CIM. J.J. Jonas Symposium on Thermomechanical Processing of Steel, pp. 265-277, Canadian Institute of Mining, Metallurgy and Petro, Canada [E2]
no DRO entry yet for this publication

Beladi, H.*, Zarei-Hanzaki, A.*, Hodgson, P. and Yue, S.* (2000) Austenite Formation in Si-Mn TRIP Steels, in S. Yue and E. Es-sadiqi (eds), J.J. Jonas Symposium n Thermomechanical Processing of Steel (COM 2000), pp. 541-556, Canadian Institute of Mining, Metallurgy & Petroleum, Canada [E2]
no DRO entry yet for this publication

Chen, W., Wang, X., Chen, D.* and Liu, X.* (2000) Bleaching and Dyeing of Pigmented Wool, in n/a (ed.), The Society of Dyers and Colourists of Australia and New Zealand16th INTERNATIONAL SYMPOSIUM, pp. 1-7, Bayer, Melbourne [E2]
no DRO entry yet for this publication

Hu, E. (2000) Integrating solar energy into traditional thermal power generation cycle - - an ideal way to generate green electricity, in Solar Energy Applications Research Group (ed.), Sustainable Energy Day, pp. 26-32, Monash University, Melbourne [E2]
no DRO entry yet for this publication

Hu, E. and Baziotopoulos, C. (2000) Solar aided regenerative rankine power plant: a feasible option for reducing greenhouse gas emissions from existing or new coal fired power stations, in David Mills, John M. Bell, Stoynov LA and Prasad KDV Yarlagadda (eds), SOLAR 2000. Proceedings of the 38th Annual Conference of the Australian and New Zealand Solar Energy Society., pp. 570-574, The Australian & New Zealand Solar Energy Society, Brisbane, Australia [E2]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (2000) ULTRAFINE FERRITE PRODUCTION BY STRAIN-INDUCED TRANSFORMATION, in M.A. Baker (ed.), 42nd Mechanical Working and Steel Processing Conference, pp. 515-522, Iron & Steel Society, USA [E2]
no DRO entry yet for this publication

Kelly, G. and Hodgson, P. (2000) The production of fine-grained austenite and ferrite in steels through thermomechanical processing, in S. Yue and E. Es-sadiqi (eds), J.J. Jonas Symposium on Thermonuclear Processing of Steel, pp. 335-349, Canadian Institute of Mining, Metallurgy & Petroleum, Canada [E2]
no DRO entry yet for this publication

Kong, L. and Wang, X. (2000) PREDICTION OF YARN PROPERTIES USING ARTIFICIAL NEURAL NETWORKS, in The Textile Institute (ed.), 80th World Conference of The Textile Institute, pp. 1-10, The Textile Institute, Manchester, UK [E2]
no DRO entry yet for this publication

Kong, L. and Platfoot, R.* (2000) THREE DIMENSIONAL ANALYSIS OF AIR FLOW IN A CURVED CONVERGING CHANNEL, in Professor B.H.V. Topping (ed.), 5th International Conference on Computational Structures Technology: Computational Mechanics: Techniques and Development, pp. 303-309, CIVIL-COMP Press, Edinburgh, Scotland [E2]
no DRO entry yet for this publication

Kong, L., Nahavandi, S. and Baliga, B. (2000) Identification of Critical Processing Parameters of High Pressure Die Casting Process Using Artificial Neural Networks, in K.S.Taraman (ed.), 2000 Pacific Conference on Manufacturing, pp. 493-498, Lawrence Technological University, USA [E2]
no DRO entry yet for this publication

Kong, L. and Hodgson, P. (2000) Development of an artificial neural network model integrated with constitutive and FEM models, in P.Martin, S.Macewen, Y.Verreman, W.J. Liu, J. Goldak (eds), Mathematical Modeling in Metal Processing and Manufacturing, 2000 Conference of Metallurigists, Canada [E2]
no DRO entry yet for this publication

Kong, L., Nahavandi, S. and Baliga, B. (2000) Defect analysis of high pressure die castings with artificial intelligence technology, in n/a (ed.), 2000 Pacific Conference on Manufacturing, pp. 506-511, Lawrence Technological University, USA [E2]
no DRO entry yet for this publication

Kong, L., Wang, B.* and Lu, G.* (2000) EXPERIMENTAL AND COMPUTATIONAL APPROACHES IN CHARACTERISING THIN FILM COATING, in professor W.B. Lee (ed.), 9th International Manufacturing Conference in China, pp. 139-141, The Hong Kong Polytechnic University, Hong Kong [E2]
no DRO entry yet for this publication

Kouzani, A. and Nahavandi, S. (2000) Facial Features for Identification, in IEEE (ed.), 2000 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN & CYBERNETICS, pp. 1372-1377, IEEE, USA [E2]
no DRO entry yet for this publication

Timokhina, I., Hodgson, P. and Pereloma, E.* (2000) Effect of Deformation Schedule on the Microstructure and Mechanical Properties of Thermomechanically Processsed C-Mn-Si TRIP Steel, in M. Baker (ed.), 42nd Mechanical Working and Steel Processing Conference Proceedings, pp. 487-494, Iron & Steel Society, USA [E2]
no DRO entry yet for this publication

Wang, X., He, W. and Zhang, S. (2000) MODELLING THE TENSILE BEHAVIOUR OF IRREGULAR FIBRES, 80th World Conference of The Textile Institute, pp. 1-10, The Textile Institute, Manchester, UK [E2]
no DRO entry yet for this publication

White, R. and Tracey, A. (2000) Effluent treatment system for the dye house at the international fibre centre, in Andrew Giles (ed.), The Society of Dyers and Colourists of Australia and New Zealand - the 16th International Symposium, pp. 1-9, Ciba, Australia [E2]
no DRO entry yet for this publication

Zhang, J. and Zhang, C.* (2000) H2/H Signal Reconstruction in Noisy Filter Bank Systems, in J.Jim Zhu (ed.), 39th IEEE Conference on Decision and Control, IEEE, USA [E2]
no DRO entry yet for this publication

Zhang, S., Hodgson, P., Cardew-Hall, M.* and Kalyanasundaram, S.* (2000) Micromechanical simulation of frictional behaviour in metal forming, in P. Martin, S. MacEwen, Y. Verreman, W. Lui and J. Goldak (eds), Mathematical Modeling in Metal Processing and Manufacturing, 2000 Conference of Metallurigists, Canada [E2]
no DRO entry yet for this publication

Zhang, X.*, Li, Y.*, Yeung, K.*, Yao, M.* and Kong, L. (2000) A FINITE ELEMENT STUDY OF STRESS DISTRIBUTION IN TEXTILES WITH BAGGING, in Professor B.H.V Topping (ed.), 5th International Conference on Computational Structures Technology, pp. 235-242, CIVIL-COMP Press, Edinburgh, UK [E2]
no DRO entry yet for this publication

She, F. H. and Nahavandi, S. (2000) A comparative study of linear and nonlinear ANNs as classifiers of animal hair fibers, Manchester 2000 : papers presented at the 80th World Conference of the Textile Institute, April 2000, Textile Institute, Manchester, England [E2.1]
DRO entry for this publication

Hu, E., You, Y.* and Hessami, M.* (2000) A STUDY OF ADSORPTION REFRIGERATION SYSTEMS OPERATING AT AROUND ATMOSPHERIC PRESSURE, in ICR (ed.), 20th International Congress of Refrigeration, ICR99, Australia [EN]
no DRO entry yet for this publication

You, Y.* and Hu, E. (2000) THE CONSIDERATIONS OF HEAT AND ENERGY BALANCE FOR HEAT EXCHANGERS, in ICR99 (ed.), 20th International Congress of Refrigeration, ICR99, Australia [EN]
no DRO entry yet for this publication

Zhang, C., Zhang, Z. and Li, Y.* (2000) Multi-agent based financial investment adviser: Design and implementation, International ICSC Congress: Intelligent systems and applications, ISA '2000, pp. 33-44, ICSC Academic Press, Canada [L2]
no DRO entry yet for this publication

Long, J. and Florance, J. (2000) Internet control of a fluid-mechanics practical for distance education students, 14th National Congress of the Australian Institute of Physics, p. 47, AIP 2000, Australia [L3]
no DRO entry yet for this publication

Long, J., Goodman, D.* and Hunault, P.* (2000) Elemental depth profiling in solids by glow-discharge optical emission spectrometry, in n/a (ed.), 14th National Congress of the Australian Institute of Physics, p. 24, Adelaide University, Adelaide [L3]
no DRO entry yet for this publication

Grants and Consultancies

Grants with funding during 2000

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

2000 - Doctor of Philosophy

Andrew Price. Supervisor: Saeid Nahavandi
Thesis entitled: Mobility and Vision for Mobile Robots in Non-Deterministic Competitive Environments.

2000 - Doctor of Technology

Dennis Brockenshire. Supervisor: Peter Hodgson
Thesis entitled: The Introduction, Management and Assessment of Change Processes at Barwon Water - A Technology Based Water Authority.

Jon Hodson. Supervisor: Peter Hodgson
Thesis entitled: Development of an Evaluation Approach to Excellence in the Australian Manufacturing Industry.

2000 - Master of Engineering

Jesus Balatbat. Supervisor: Peter Hodgson
Thesis entitled: Robust Surface Practices for Sheet Metal Forming Dies.

Natasha Skoric. Supervisor: Peter Hodgson
Thesis entitled: Effects of Aging Bake Hardenable Steel in Sheet Metal Forming.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Monday 29th September 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010