Research Services Division

Deakin Research

2001 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Lloyd, Brian (2001) Engineering the future : preparing professional engineers for the 21st century, in Lloyd, Brian (eds), Association of Professional Engineers, Scientists and Managers Australia in association with Histec Publications, Melbourne, Vic. [A7]
DRO entry for this publication

Ferguson, Clive (2001) Education at a distance, Engineering the future : preparing professional engineers for the 21st century, pp. 94-103, Histec Publications, Melbourne, Vic. [B1.1]
DRO entry for this publication

Lloyd, Brian (2001) The beginnings to 1919, Engineering the future : preparing professional engineers for the 21st century, pp. 10-13, Histec Publications, Melbourne, Vic. [B1.1]
DRO entry for this publication

Wang, Xungai (2001) The current state and future strategy for quality management in the Chinese wool textile industry, in Ao da li ya guo ji yuan zhu shu and Guo ji yang mao ju (eds), Quality management for the wool textile industry, pp. 9-20, China Textile Press, Beijing, China [B2]
DRO entry for this publication

Barnett, Matthew (2001) Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ31, Journal of light metals, vol. 1, no. 3, pp. 167-177, Elsevier Science, New York, N.Y. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 169
DRO entry for this publication

Bazargan-Lari, Massoud* and Nahavandi, Saeid (2001) The impact of cell formation on layout designs in cellular manufacturing, Intelligent automation and soft computing, vol. 7, no. 1, pp. 13-22, AutoSoft Press, Albuquerque, N.M [C1]
ERA journal ID: 32062 – Scopus EID: 2-s2.0-0345820076
DRO entry for this publication

Chen, Weiguo*, Chen, Dongzi* and Wang, Xungai (2001) Surface modification and bleaching of pigmented wool, Textile research journal, vol. 71, no. 5, pp. 441-445, Institute and the Foundation, Lancaster, Pa. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0035339762
Citation counts: Scopus - 5
DRO entry for this publication

Doolan, M.C.*, Kalyanasundaram, S.*, Hodgson, Peter and Cardew-Hall, M.* (2001) Identifying variation in sheet metal stamping, Journal of materials processing technology, vol. 115, no. 1, pp. 142-146, Elsevier Science SA, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
Citation counts: Thomson - 7
DRO entry for this publication

Fernando, T.* and Trinh, Hieu (2001) Conditions to ensure the 2-D characteristic polynomial of uncertain matrix is very strict Hurwitz, Control and intelligent systems, vol. 29, no. 1, pp. 18-22, ACTA Press, Anaheim, CA [C1]
ERA journal ID: 4405 – Scopus EID: 2-s2.0-0034757411
DRO entry for this publication

He, Weiyu, Wang, Xungai and Zhang, Shaorui (2001) Mechanical behavior of irregular fibers part II : non-linear tensile behavior, Textile research journal, vol. 71, no. 11, pp. 939-942, The Institute and the Foundation, Lancaster, Pa. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0035513369
Citation counts: Scopus - 8
DRO entry for this publication

He, Weiyu, Zhang, Shaorui and Wang, Xungai (2001) Mechanical behavior of irregular fibers part I : modeling the tensile behavior of linear elastic fibers, Textile research journal, vol. 71, no. 6, pp. 556-560, The Institute and the Foundation, Princeton, N.J. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0035369427
Citation counts: Scopus - 8
DRO entry for this publication

Hurley, P.J.* and Hodgson, Peter (2001) Formation of ultra-fine ferrite in hot rolled strip: potential mechanisms for grain refinement, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 302, pp. 206-214, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0035972131
Citation counts: Scopus - 105, Thomson - 91
DRO entry for this publication

Hurley, P. J.*, Hodgson, Peter and Muddle, B. C.* (2001) A study of deformation substructures in austenite using a model Ni-30 wt.% Fe alloy, Scripta materialia, vol. 45, no. 1, pp. 25-32, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-0035854499
Citation counts: Scopus - 20, Thomson - 16
DRO entry for this publication

Hurley, Peter* and Hodgson, Peter (2001) Effect of process variables on formation of dynamic strain induced ultrafine ferrite during hot torsion testing, Materials Science and Technology, vol. 17, no. 11, pp. 1360-1368, Institute of Metals, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 35
DRO entry for this publication

Hurley, P.J.*, Muddle, B.C.* and Hodgson, Peter (2001) Nucleation sites for ultrafine ferrite produced by deformation of austenite during single-pass strip rolling, Metallurgical and materials transactions. A, physical metallurgy and materials science, vol. 32, no. 6, pp. 1507-1517, Minerals, Metals & Materials Society, Warrendale, PA [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0001422267
Citation counts: Scopus - 51, Thomson - 49
DRO entry for this publication

Kaynak, Akif (2001) Aging studies on conducting polypyrrole, Fibers and polymers, vol. 2, no. 4, pp. 171-177, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: Not tagged
DRO entry for this publication

Kong, Lingxue, Wang, B.* and Hodgson, Peter (2001) Prediction of stress-strain behaviors in steels using an integrated constitutive, FEM and ANN model, ISIJ international, vol. 41, no. 7, pp. 795-800, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: Not tagged
Citation counts: Scopus - 5
DRO entry for this publication

Kong, Lingxue, Lin, L. and Hodgson, Peter (2001) Material properties under drawing and extrusion with cyclic torsion, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 308, no. 1-2, pp. 209-215, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0342960843
Citation counts: Scopus - 8, Thomson - 9
DRO entry for this publication

Mandal, P.* and Nahavandi, Saeid (2001) Design of user interfaces for job shop environment, Intelligent automation and soft computing, vol. 7, no. 1, pp. 75-85, AutoSoft Press, Albuquerque, N.M [C1]
ERA journal ID: 32062 – Scopus EID: 2-s2.0-0345820074
DRO entry for this publication

Norman, S.* and Wang, Xungai (2001) Modified two-strand spinning (part III : yarn performance), Research journal of textile and apparel, vol. 5, no. 1, pp. 1-9, Hong Kong Polytechnic University, Hong Kong [C1]
ERA journal ID: 3546 – Scopus EID: Not tagged
DRO entry for this publication

Palmer, Stuart and Tulloch, William (2001) The evolution of online teaching and learning in engineering at Deakin University, Journal of computing in higher education, vol. 13, no. 1, pp. 91-109, Paideia Publishers, Amherst, Mass. [C1]
ERA journal ID: 20291 – Scopus EID: Not tagged
DRO entry for this publication

Palmer, Stuart and Bray, Sharyn (2001) Longitudinal study of computer usage in flexible engineering education, Australian journal of educational technology, vol. 17, no. 3, pp. 313-329, Australian Society of Educational Technology (ASET), Carlingford, N.S.W. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Palmer, Stuart (2001) On- and off-campus engineering student usage of a computer conferencing system, Journal of research on computing in education, vol. 33, no. 3, pp. 280-298, International Society for Technology in Education, Eugene, Or. [C1]
ERA journal ID: 20277 – Scopus EID: Not tagged
DRO entry for this publication

Palmer, Stuart (2001) Whither management studies in Australian engineering undergraduate courses, Australasian journal of engineering education, vol. 9, no. 2, pp. 113-126, The Australasian Association for Engineering Education Inc, Sydney, N.S.W. [C1]
ERA journal ID: 40310 – Scopus EID: Not tagged
DRO entry for this publication

Palmer, Stuart (2001) Engineering flexible teaching and learning in engineering education, European journal of engineering education, vol. 26, no. 1, pp. 1-13, Carfax, Abingdon, England [C1]
ERA journal ID: 20622 – Scopus EID: Not tagged
DRO entry for this publication

Pereloma, E. V.*, Timokhina, Ilana and Hodgson, Peter (2001) Microstructure and mechanical properties of thermomechanically processed C-Si-Mn steels, Ironmaking and steelmaking, vol. 28, no. 2, pp. 198-202, Maney Publishing, London, England [C1]
ERA journal ID: 4721 – Scopus EID: Not tagged
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Timokhina, Ilana*, Pereloma, E.V.* and Hodgson, Peter (2001) Microstructure and mechanical properties of C-Si-Mn(-Nb) TRIP steels after simulated thermomechanical processing, Materials science and technology, vol. 17, no. 2, pp. 135-140, Maney Publishing, Leeds, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 16
DRO entry for this publication

Trinh, Hieu, Nahavandi, Saeid and Fernando, T.* (2001) Reduced-order output feedback controllers for discrete-time systems, Control and intelligent systems, vol. 29, no. 2, pp. 40-47, ACTA Press, Anaheim, Calif. [C1]
ERA journal ID: 4405 – Scopus EID: 2-s2.0-0035653010
DRO entry for this publication

Walker, Craig I. (2001) Slurry pump side-liner wear : comparison of some laboratory and field results, Wear, vol. 250, no. 1-2, pp. 81-87, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-0035482620
Citation counts: Scopus - 9
DRO entry for this publication

Wang, B.*, Klepaczko, J.*, Lu, G.* and Kong, Lingxue (2001) Viscoplastic behaviour of porous bronzes and irons, Journal of materials processing technology, vol. 113, no. 1-3, pp. 574-580, Elsevier Science SA, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0035876582
Citation counts: Scopus - 15, Thomson - 13
DRO entry for this publication

Zhang, Yuping and Wang, Xungai (2001) The minimum diameter distribution and strength variation of top dyed wool, Wool technology and sheep breeding, vol. 49, no. 3, pp. 212-221, Wool Research Organisation of New Zealand, Christchurch, N.Z. [C1]
ERA journal ID: 5570 – Scopus EID: 2-s2.0-0034776144
Citation counts: Scopus - 1
DRO entry for this publication

She, F. H., Chow, S., Wang, B. and Kong, L. X. (2001) Identification and classification of animal fibres using artificial neural networks, Journal of textile engineering, vol. 47, no. 2, pp. 35-38, Nihon Sen'i Kikai Gakkai, Osaka-shi, Japan [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 6
DRO entry for this publication

She, F.H., Kong, L.X., Nahavandi, S. and Kouzani, A.Z. (2001) Animal fibre classification, Textile Asia, vol. 32, no. 11, pp. 44-47, Business Press Ltd, Hong Kong [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Cardew-Hall, Michael*, Hodgson, Peter and Miller, Noel* (2001) Leaving the lab behind : Australian students move stamping research to the plant, Stamping journal, vol. 13, no. 2, pp. 26-29, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hu, Eric and Mathie, Mal* (2001) Solar powered cooling and RAPS, Solar progress, vol. 22, no. 3, p. 11, Australian and New Zealand Solar Energy Society, Australia [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Wang, Lijing and Wang, Xungai (2001) Investigation of fibre tension and fibre breakage in siumulated fibre opening processes, Research journal of textile and apparel, vol. 5, no. 1, pp. 53-64, Hong Kong Institution of Textile and Apparel, Hung Hom, Hong Kong [C3]
ERA journal ID: 3546 – Scopus EID: Not tagged
DRO entry for this publication

Nahavandi, Saeid (2001) Guest editorial : Advances in manufacturing technology, Intelligent automation and soft computing, vol. 7, no. 1, pp. 1-2, AutoSoft Press, Albuquerque, N.M [C4]
ERA journal ID: 32062 – Scopus EID: Not tagged
DRO entry for this publication

Barnett, Matthew and Hodgson, Peter (2001) Metal forming (hot) : microstructural aspects, in Buschow , K. H. Jürgen; Cahn , Robert W.; Flemings , Merton C.; Ilschner , Bernard; Kramer , Edward J.; Mahajan , Subhash and Veyssière , Patrick (eds), Encyclopedia of materials : science and technology, pp. 5417-5424, Elsevier, Amsterdam, The Netherlands [D2]
DRO entry for this publication

Tyler, Peter, Terry, Colin* and Howland, M.B.* (2001) Gordon River meromictic lakes assessment, in Locher, Helen (eds), Basslink integrated impact assessment statement - Potential effects of changes to hydro power generation, Hydro Tasmania, Hobart, Tas. [D2]
DRO entry for this publication

Aldeen, M.* and Trinh, Hieu (2001) Design of a distributed power system stabiliser, in Islam, S. M.; Borle, L. and Keerthipala, W. W. L. (eds), Proceedings of the Australasian Universities Power Engineering Conference (AUPEC-2001) : millennium power vision, 23-26 September 2001, pp. 1-6, Australasian Committee for Power Engineering, Perth, WA [E1]
DRO entry for this publication

Baskaran, Kanagaratnan, Walsh, Peter and Norton, Lisa (2001) Innovative approach to nitrogen removal in wastewater treatment lagoons, in Iorizzo, Jeanette (eds), 2001 water odyssey: AWA 19th Convention: a water odyssey., Australian Water Association, Artarmon, N.S.W. [E1]
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2001) The hot deformation of wrought magnesium alloy AZ31, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 87-92, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Burgess-Dean, L., Kelly, Georgina and Crawford, B. (2001) A mechanical test for the durability of fired clay products using compressive strength and indentation hardness tests, in Griffith, Michael (eds), Proceedings of the 6th Australasian Masonry Conference, Adelaide, South Australia, 12-13 July 2001, pp. 83-94, Adelaide University, Adelaide, S.Aust. [E1]
DRO entry for this publication

Burgess-Dean, L., Crawford, B. and Kelly, Georgina (2001) The resistance to salt attack compared with the material properties of fired clay products, in Griffith, Michael (eds), Proceedings of the 6th Australasian Masonry Conference, pp. 73-82, Adelaide University, Adelaide, S. Aust. [E1]
DRO entry for this publication

del Mar, J., Parsons, T., Nahavandi, Saeid, Kouzani, Abbas and Kong, Lingxue (2001) Development of an on-line tool condition monitoring system in cold bulk metal forming, in Unknown (ed.), Proceedings of the International NAISO Congress on Information Science Innovations : ISI'2001, March 17-21, 2001, The American University in Dubai, Dubai, U.A.E., pp. 509-515, ICSC Academic Press, Millet, Alberta [E1]
DRO entry for this publication

Doolan, M. C.*, Kalyanasundaram, S.*, Hodgson, Peter and Cardew-Hall, M.* (2001) Signature analysis using active shape models, in Duflou, J. R.; Geiger, M.; Kals, H. J. J.; Shirvani, B. and Singh, U. P. (eds), Proceedings of Sheet Metal 2001 9th International Conference, pp. 547-554, ACCO C.V., Leuven, Belgium [E1]
DRO entry for this publication

Fabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2001) Combating adhesive wear in automotive stamping, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 237-242, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Fernando, T.* and Trinh, Hieu (2001) Stability margin of multi-dimensional discrete systems, in Hamza, M. H. (eds), Proceedings of the IASTED International Conference : Control and Applications 2001, pp. 240-244, ACTA Press, Anaheim, Calif. [E1]
DRO entry for this publication

Fox, Bronwyn, Lowe, A.* and Hodgkin, J.* (2001) The evaluation of accelerated ageing tests for high temperature carbon fibre composites, in Pereloma, E. and Raviprasad, Krishnamurthy (eds), Proceedings of the IMEA Conference, engineering materials 2001, pp. 141-146, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2001) Numerical simulation of heat transfer and temperature fields of workpiece in fluidized bed heat treatment furnaces, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 25-31, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Gresham, R.*, Hodgson, Peter, Smith, J.* and Cardew-Hall, M.* (2001) Data capture and analysis system for sheet metal forming problems, in Duflou, J.R.; Geiger, M.; Kals, H.J.J.; Shirvani, B. and Singh, U.P. (eds), Sheet metal 2001 : proceedings of the 9th International Conference held at the Katholieke Universiteit Leuven, Belgium, 2-4 April, 2001, pp. 521-527, ACCO C.V., Leuven, Belgium [E1]
DRO entry for this publication

Ha, Q.*, Trinh, Hieu, Zhu, J.* and Nguyen, H.* (2001) Dynamic output feedback control of single-link flexible manipulators, in Rye, David and Furukawa, Tomonari (eds), ACRA 2001 : proceedings of the 2001 Australian Conference on Robotics and Automation, Sydney, 14-15 November 2001, pp. 7-12, Australian Robotics and Automation Association, Sydney, N.S.W. [E1]
DRO entry for this publication

Hodgson, Peter, Hurley, P.* and Kelly, Georgina (2001) The formation of ultrafine ferrite in low C steels through thermomechanical processing, in Takaki, S. and Maki, T. (eds), Proceedings of the International Symposium on Ultrafine Grained Steels (ISUGS 2001), pp. 10-17 [E1]
DRO entry for this publication

Hu, Eric, Baziotopoulos, Con* and Li, Yuncang* (2001) Green electricity from coal fired power stations : is this possible?, in Shaw, Todd (eds), Proceedings of the Air & Waste Management Association's 94th annual conference & exhibition Orlando, Florida, June 24-28, 2001, pp. 1-6, Air & Waste Management Association, Pittsburgh, Pa. [E1]
DRO entry for this publication

Hu, Eric (2001) A new concept: energy credit in global emission trading, in Zahedi, Dr. A. (eds), Sustainable Energy Day : proceedings Wednesday July 11, 2001, pp. 62-70, Monash University, Melbourne, Vic. [E1]
DRO entry for this publication

Hu, Eric, You, Y.* and Li, Yuncang* (2001) Solar thermal power or solar aided thermal power? A choice between efficiencies, in Hu, Xijun and Yue, Po Lock (eds), Proceedings of the third Asia-Pacific Conference on Sustainable Energy and Environmental Technologies : Hong Kong, 3-6 December 2000, pp. 387-391, World Scientific, Singapore [E1]
DRO entry for this publication

Kelly, Georgina and Hodgson, Peter (2001) Post-deformation softening and strain-induced transformation, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 63-68, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Khalife, M., Dharmappa, H.* and Sivakumar, M.* (2001) Wastewater characteristics from an Aboriginal community, in Iorizzo, Jeanette (eds), AWA 2001 : Proceedings of the 19th Australian Water Association Convention : Ozwater : A Water Odyssey, Australian Water Association, Canberra, A.C.T [E1]
DRO entry for this publication

Khalife, M., Dharmappa, H.* and Sivakumar, M.* (2001) Performance of existing septic tanks in an Aboriginal community, in Iorizzo, Jeanette (eds), AWA 2001 : Proceedings of the 19th Australian Water Association Convention : Ozwater : A Water Odyssey, Australian Water Association, Canberra, A.C.T [E1]
DRO entry for this publication

Khalife, Mohsen, Dharmappa, Hagare* and Sivakumar, Muttucumaru* (2001) Short-term variations in wastewater flow rates and pollutants from individual residences in a remote Aboriginal community, in Patterson, Robert and Jones, Malcolm (eds), On-site '01 : Proceedings of On-site '01 Conference : Advancing On-site Wastewater Systems, pp. 235-240, Lanfax Laboratories, Armidale, N.S.W. [E1]
DRO entry for this publication

Kong, Lingxue and Gao, Weimin (2001) Thermal control of high pressure die casting using computational fluid dynamics, in Mori, Ken-ichiro (eds), Simulation of materials processing: theory, methods and applications: proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes - NUMIFORM 2001, pp. 1073-1078, A.A. Balkema, Lisse; Exton [E1]
DRO entry for this publication

Kong, Lingxue and Nahavandi, Saeid (2001) Design of chassis in formula SAE car using finite element methods, in Parsaei, H.R.; Gen, M.; Leep, H.R. and Wong, J.P. (eds), Design and manufacturing automation for the 21st century : 5th International Conference on Engineering Design and Automation, EDA Conference ; [the Regent Hotel, Las Vegas, Nevada, USA] ; refereed conference papers, pp. 317-322, Integrated Technology Systems, Prospect, Ky [E1]
DRO entry for this publication

Kong, Lingxue (2001) Internal cooling system design and fuzzy thermal control, in Parsaei, H.R.; Gen, M.; Leep, H. and Wong, J. (eds), Design and manufacturing automation for the 21st century : 5th International Conference on Engineering Design and Automation, EDA Conference ; [the Regent Hotel, Las Vegas, Nevada, USA] ; refereed conference papers, pp. 706-712, Integrated Technology Systems, Prospect, Ky [E1]
DRO entry for this publication

Kouzani, Abbas and Ong, Soon Huat (2001) Wavelet packets for lighting-effects determination, in Tang, Yuan Y.; Wickerhauser, Victor; Yuen, Pong C. and Li, Chun-Hung (eds), WAA 2001 : Proceedings of the 2nd International Conference of Wavelet analysis and its applications, Hong Kong, China, December 18-20, 2001, pp. 188-199, Springer, Berlin, Germany [E1]
DRO entry for this publication

Kouzani, Abbas and Nahavandi, Saeid (2001) Selfsimilar image feature extraction, in Sebaaly, M.F. (eds), Proceedings of the International NAISO Congress on Information Science Innovations : ISI'2001, March 17-21, 2001, The American University in Dubai, Dubai, U.A.E., pp. 503-508, ICSC Academic Press, Millet, Alberta [E1]
DRO entry for this publication

Long, John (2001) Glow-discharge optical emission spectrometry for elemental depth-profiling in materials, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Proceedings of Engineering Materials 2001, pp. 87-92, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kong, Lingxue (2001) Slab analysis of cyclic torsional extrusion, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 38-43, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Mills, S., Barnett, Matthew and Brownrigg, Allan (2001) Effect of drawing and cross section hardness on surface strain path during compression, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : proceedings, pp. 75-80, The Institute, North Melbourne, Vic. [E1]
DRO entry for this publication

Nahavandi, Saeid and Kouzani, Abbas (2001) Design and prototyping of a low cost servo-valve for the control of pneumatic muscles in robots, in Sebaaly, M.F. (eds), Proceedings of the International NAISO Congress on Information Science Innovations : ISI'2001, March 17-21, 2001, The American University in Dubai, Dubai, U.A.E., pp. 496-502, ICSC Academic Press, Millet, Alberta [E1]
DRO entry for this publication

Nahavandi, Saeid, Kong, Lingxue, Kouzani, Abbas and Trinh, Hieu (2001) Heuristics solutions for scheduling in wire harness production, in Sobh, T. M. and Elleithy, K. M. (eds), IETA 2001 : Proceedings of the International Conference on Industrial Electronics, Technology & Automation, IETA, Cairo, Egypt [E1]
DRO entry for this publication

Ong, S.H. and Kouzani, Abbas (2001) A wavelet-based ammunition doppler radar system, in Tang, Y.Y.; Wickerhauser, V.; Yuen, P.C. and Li, C. (eds), WAA 2001 : Proceedings of the Wavelet Analysis and its Applications : second international conference, WAA 2001, Hong Kong, China, December 18-20, 2001 : Proceedings, pp. 382-392, Springer, Heidelburg, Germany [E1]
DRO entry for this publication

Palmer, Stuart (2001) Graduate evaluation of engineering management studies at Deakin University, in Dawes, Les; Boles, Wageeh and Maeder, Anthony (eds), Towards excellence in engineering education : proceedings of the 12th Australasian Conference on Engineering Education, 7th Australasian Women in Engineering Forum, 26th-28th September, 2001, Queensland University of Technology, Brisbane, Queensland, pp. 281-286, Queensland University of Technology, Brisbane, Qld. [E1]
DRO entry for this publication

Palmer, Stuart (2001) Usage of a computer conferencing system by on- and off-campus engineering students, in Pudlowski, Zenon J. (eds), Proceedings of the 4th UICEE Annual Conference on Engineering Education, pp. 327-331, UNESCO International Centre for Engineering Education (UICEE), Clayton, Vic. [E1]
DRO entry for this publication

Palmowski, Laurence, Mundhenke, R.*, Muller, J.* and Schwedes, H.* (2001) Importance of substrate surface area in the kinetics of organic solids degradation, in Van Lier, J. and Lubberding, H. (eds), Anaerobic digestion IX : selected proceedings of the 9th World Congress on Anaerobic Digestion, held in Antwerp, Belgium, 2-6 September, 2001, pp. 163-168, IWA Pub, London, England [E1]
DRO entry for this publication

Refaat, Sameh and Nahavandi, Saeid (2001) On intentional trajectory deviation in multi axes CNC, in Sobh, T. M. and Elleithy, K. M. (eds), IETA 2001 : Proceedings of the International Conference on Industrial Electronics, Technology & Automation, IETA, Cairo, Egypt [E1]
DRO entry for this publication

Reininga, A.*, Kelder, M.*, Nahavandi, Saeid and Kong, Lingxue (2001) Computational simulation of chassis design and manufacturing, in Habruken, A.M. (eds), Proceedings of the 4th International ESAFORM Conference on Material Forming, Liege, Belgium, April 23-25, 2001, pp. 781-784, Universite de Liege, Liege, Belgium [E1]
DRO entry for this publication

Roche, D., Tracey, A., Baskaran, Kanagaratnan and White, R. (2001) Physico-chemical treatment of dyehouse wastewater, in Iorizzo, Jeanette (eds), Proceedings of the AWA 19th convention: a water odyssey, Australian Water Association, Artarmon, N.S.W [E1]
DRO entry for this publication

Scott-Murphy, A.*, Cardew-Hall, M.*, Kalyanasundaram, S.* and Hodgson, Peter (2001) Knowledge based optimisation techniques for sheet metal forming die design, in Mori, K. (eds), Proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes, pp. 751-756, A. A. Balkema, Leiden, Netherlands [E1]
DRO entry for this publication

Szyndler, D.*, Pietrzyk, M.* and Hodgson, Peter (2001) Identification of parameters in the internal variable constitutive model and friction model for hot forming of steels, in Mori, Ken-ichiro (eds), Simulation of materials processing : theory, methods and applications : proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001, pp. 297-302, A.A. Balkema, Lisse, The Netherlands [E1]
DRO entry for this publication

Timokhina, I., Hodgson, Peter and Pereloma, E.* (2001) The effect of Nb, Mo, and A1 additions on the transformation behaviour and mechanical properties of thermomechanically processed C-Si-Mn trip steel, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 57-62, IMEA, Melbourne, Vic [E1]
DRO entry for this publication

Trinh, Hieu and Aldeen, M.* (2001) Design of stabilizing decentralized state multi-functional observers, in Hamza, M. H. (eds), Proceedings of the IASTED International Conference, Control and Applications, Banff, Alberta, Canada, June 27-29, 2001, pp. 235-239, ACTA Press, Anaheim, Calif. [E1]
DRO entry for this publication

Trinh, Hieu, Nahavandi, Saeid and Fernando, T.* (2001) Pole-placement by output feedback controllers, in Hamza, M.H. (eds), Proceedings of the IASTED International Conference, Control and Applications, Banff, Alberta, Canada, June 27-29, 2001, pp. 260-263, ACTA Press, Anaheim, Calif. [E1]
DRO entry for this publication

Vlahovic, S., Savage, S., Barnett, Matthew and Hodgson, Peter (2001) Warm net forging in the production environment, in Pereloma, Elena and Raviprasad, Krishnamurthy (eds), Engineering materials 2001 : 23-26 Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 69-74, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Whale, J., Kelly, Georgina and Hodgson, Peter (2001) Dynamic transformation of ferrite to austenite to ferrite through deformation heating, in Pereloma, E. and Raviprasad, K. (eds), Engineering materials 2001 : 23-26 September 2001, Melbourne, Australia : proceedings, pp. 81-86, IMEA, Melbourne, Vic. [E1]
DRO entry for this publication

Zhang, Cishen* and Zhang, Jingxin (2001) Robustness analysis of multirate control systems, in Qin, H. and Wang, W. (eds), Proceedings of the 20th Chinese Control Conference, pp. 286-291, The Press of Dalian University of Science and Technology, China, China [E1]
DRO entry for this publication

Zhang, Kun*, Zhang, Jingxin and Chan, Waikeung* (2001) Modeling and control of mechanical impact on hot steel rolling mill, in Mohammadian, Masoud (eds), International conference on computational intelligence for modelling, control & automation : CIMCA 2001, pp. 373-379, University of Canberra, Canberra, A.C.T. [E1]
DRO entry for this publication

Zhang, S., Hodgson, Peter, Cardew-Hall, M.* and Kalyanasundaram, S.* (2001) The finite element modelling of rear suspension arm using an non-uniform friction law, in Mori, K. (eds), Simulation of materials processing : theory, methods and applications : proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001, pp. 633-638, A.A. Balkema, Lisse, The Netherlands [E1]
DRO entry for this publication

Zou, Linda (2001) Microscopic nature and elemental composition of brown coal fly ash particles from a large coal fired power station, in Hu, Xijun and Yue, Po Lock (eds), APCSEET 2001 : Proceedings of the 3rd Asia-Pacific Conference on Sustainable Energy and Environmental Technologies, pp. 392-397, World Scientific, Singapore [E1]
DRO entry for this publication

Zou, L., Li, Yuncang, Atkiston, S. and Hooper, M.* (2001) Study of polycyclic aromatic hydrocarbons emissions from burning of local wood species in Australia, in Baugues, Keith (eds), A&WMA's 2001 : Proceedings of the Air and Waste Management Associations 94th Annual Conference and Exhibition, pp. 1-9, Air & Waste Management Association, Pittsburgh, Pa [E1]
DRO entry for this publication

Zumpe, H.*, Baskaran, Kanagaratnam and Dharmabalan, P.* (2001) Minimisation of residual production through process optimisation and beneficial reuse, in Iorizzo, Jeanette (eds), Proceedings of the AWA 19th Convention. A Water Odyssey, Australian Water Association, Artarmon, N.S.W. [E1]
DRO entry for this publication

Kong, Lingxue (2001) Industrial application of thermal image processing and thermal control, in Li, Deren (eds), SPIE 2001 : Data mining and applications : 23-24 October 2001, Wuhan, China, pp. 139-144, SPIE, Washington, D.C. [E1.1]
Citation counts: Thomson - 1
DRO entry for this publication

Refaat, Sameh and Nahavandi, Saeid (2001) Reducing position error of cantilevered loads in motion systems, in Wang, Fei-Yue (eds), 2001 IEEE International Conference on Systems, Man & Cybernetics : e-systems and e-man for cybernetics in cyberspace : October 7-10, 2001, Tucson Convention Center, Tucson, Arizona, United States, pp. 3175-3180, IEEE Xplore, Piscataway, N.J. [E1.1]
DRO entry for this publication

Refaat, Sameh and Nahavandi, Saeid (2001) Controlling the relative orientation between the two magnetic fields of a synchronous motor, in Wang, Fei-Yue (eds), 2001 IEEE International Conference on Systems, Man & Cybernetics : e-systems and e-man for cybernetics in cyberspace : October 7-10, 2001, Tucson Convention Center, Tucson, Arizona, United States, pp. 3169-3174, IEEE Xplore, Piscataway, N.J. [E1.1]
DRO entry for this publication

Barnett, M.R and Montheillet, F.* (2001) The generation of new high angle boundaries during the hot torsional deformation of aluminium, in Gottstein, Gunter and Molodov, Dmitri (eds), Recrystallization and Grain Growth. Proceedings of the 1st Joint International Conference., pp. 869-874, Springer-Verlag, Aachen, Germany [E2]
Citation counts: Thomson - 55
DRO entry for this publication

Campbell, P.*, Hodgson, P. and Cardew-Hall, M.* (2001) Optimisation of production decisions with stochastic process failures, in Hanus, D. and Talácko, J. (eds), ICPR 2001 : Proceedings of the 16th International Conference on Production Research, Czech Association of Scientific and Technical Societies, Prague, Czech Republic [E2]
DRO entry for this publication

Chang, Lingli and Wang, Xungai (2001) The hairiness features of new yarns, An Odyssey in Fibres and Space : Textile Institute 81st World Conference, Textile Institute, Manchester, England [E2]
DRO entry for this publication

de Ruyter, A., Cardew-Hall, M.* and Hodgson, P. (2001) Estimating quality costs in an automotive stamping plant through the use of simulation, in Hanus, D. and Talacko, J. (eds), ICPR 2001 : Proceedings of the 16th International Conference on Production Research, Czech Association of Scientific and Technical Societies, Prague, Czech Republic [E2]
DRO entry for this publication

Dingle, Matthew, Hodgson, Peter and Cardew-Hall, Michael* (2001) Effect of global and local stiffness on blankholder pressure in draw die forming, Proceedings of the SAE 2001 World Congresss, Society of Automotive Engineers, Inc [E2]
DRO entry for this publication

Fabijanic, D., Miller, C., Barnett, M., Cardew-Hall, M.*, Haynes, D.* and Hodgson, P. (2001) Investigation of tool finish direction and lubrication in the forming of cylindrical cups, in Duflou, J.R. (eds), SheMet 2001 : Proceedings of the 9th International Conference on Sheet Metal, pp. 101-108, Heverlee, Katholieke Universiteit Leuven, Departement Werktuigkunde, Leuven, Belgium [E2]
DRO entry for this publication

Gotzinger, Mary*, Kalyanasundaram, S.*, Hodgson, Peter and Cardew-Hall, Michael* (2001) A methodology for springback prediction, ATTCE 2001 proceedings volume 3 : manufacturing, Society of Automotive Engineers, Warrendale, Pa. [E2]
DRO entry for this publication

Kelly, G. and Hodgson, P. (2001) Dynamic transformation of ferrite to austenite to ferrite through large strain deformation, in Takaki, Setsuo (eds), ISUGS 2001 : Proceedings of the International Symposium on Ultrafine Grained Steels, pp. 96-99, The Iron and Steel Institute of Japan, Fukuoka, Japan [E2]
DRO entry for this publication

Khan, Zulfiqar and Wang, Xungai (2001) Post-spinning yarn engineering, An Odyssey in Fibres and Space : Textile Institute 81st World Conference, Textile Institute, Manchester, England [E2]
DRO entry for this publication

Kong, Lingxue, Li, Yi*, She, Mary F.H., Gao, Weimin and Wong, B. Z.* (2001) Effect of fibre geometry and porosity on heat and moisture transfer in textiles, An Odyssey in Fibres and Space : Textile Institute 81st World Conference, Textile Institute, Manchester, England [E2]
DRO entry for this publication

Kong, Lingxue and She, F. H. (2001) Image processing and pattern recognition in textiles, in Li, Deren (eds), SPIE 2001 : Data mining and applications : 23-24 October 2001, Wuhan, China, pp. 1-6, SPIE, Washington, D.C. [E2]
Citation counts: Thomson - 1
DRO entry for this publication

Kong, Lingxue, Li, Yi*, Zhang, X* and She, Mary F.H. (2001) Computational simulation of fibre configuration in yarns and its movement during yarn deformation, Proceedings of the 6th Asian textile conference : innovation and globalization, Hong Kong Institution of Textiles and Clothing, Hong Kong [E2]
DRO entry for this publication

Kong, Lingxue, Ma, Xiang, Wang, B.* and Lu, G.* (2001) Computational simulation of thin film coating during scratching, in Meech, John A. (eds), IPMM-2001, the Third International Conference on Intelligent Processing and Manufacturing of Materials, pp. 1-8, CRC Press, Boca Raton, Fla. [E2]
DRO entry for this publication

Kouzani, A. Z. and Nahavandi, S. (2001) Constructing artificial images of facial expressions, in Bouzerdoum, A. and Attikiouzel, Y. (eds), ANZIIS 2001 : Proceedings of the Seventh Australian and New Zealand Intelligent Information Systems Conference, pp. 177-181, IEEE, Piscataway, N. J. [E2]
DRO entry for this publication

Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Formation mechanism of inner-wall fold in thick lead tube under axial compression with fixed ends, in Wong, Joseph (eds), Proceedings of the Worley Australasian Finite Element Conference : the Windsor, Melbourne, Australia : 22-23 February 2001, pp. 140-149, Worley Limited, Melbourne, Vic. [E2]
DRO entry for this publication

Ma, Xiang, Kong, Lingxue and Barnett, Matthew (2001) Numerical simulation of forward extrusion with cyclic die rotation, in Meech, John A. (eds), IPMM-2001: the Third International Conference on Intelligent Processing and Manufacturing of Materials and Manufacturing of Materials 3rd International Conference, pp. 1-11, CRC Press, Boca Raton, Fla. [E2]
DRO entry for this publication

Nahavandi, S. and Kouzani, A. (2001) Artificial hand - from a robotic perspective, in Bouzerdoum, A. and Attikiouzel, Y. (eds), ANZIIS 2001 : Proceedings of the Seventh Australian and New Zealand Intelligent Information Systems Conference, pp. 37-42, IEEE, Piscataway, N. J. [E2]
DRO entry for this publication

Roche, D. and Baskaran, K. (2001) Wastewater management issues within the textile industry, An Odyssey in Fibres and Space : Proceedings of the Textile Institute 81st World Conference, Textile Institute, Manchester, England [E2]
DRO entry for this publication

Scott, Robert, Wolfkamp, Henry*, Brownrigg, Allan and Hodgson, Peter (2001) Prediction of plastic set in sheet steel using variable radius springback measurement, in Baker, M. A. (eds), Mechanical working and steel processing : proceedings of the ... Mechanical Working and Steel Processing Conference and Symposium on New Metal Forming Processes, pp. 221-234, Gordon and Breach, New York, N.Y. [E2]
DRO entry for this publication

She, F.H., Nahavandi, S., Kouzani, A.Z. and Kong, L.X. (2001) Development of a hybrid artificial neural network to identify animal fibres from their scale images, Proceedings of the 6th Asian textile conference : innovation and globalization, Hong Kong Institution of Textiles and Clothing, Hong Kong [E2]
DRO entry for this publication

Timokhina, I., Hodgson, P. and Pereloma, E.* (2001) Morphology and stability of retained austenite in thermomechanically processed C-Mn-Si (-Nb) trip steels, Euromat 2001 : Proceedings of the European Congress and Exhibition on Advanced Materials and Processes, Associazione Italiana Di Metallurgia, Rimini, Italy [E2]
DRO entry for this publication

Tung, G.L.*, Kong, L.X., Lu, W.M.* and She, F.H. (2001) Calendering effect of woven fabric on its filtration properties, Proceedings of the 6th Asian textile conference : innovation and globalization, Hong Kong Institution of Textiles and Clothing, Hong Kong [E2]
DRO entry for this publication

Wang, Lijing and Wang, Xungai (2001) A study of fibre strength loss in simulated fibre opening processes, in unknown (ed.), Proceedings of the 6th Asian textile conference : innovation and globalization, Hong Kong Institution of Textiles and Clothing, Hong Kong [E2]
DRO entry for this publication

She, F. H., Kong, L. X., Nahavandi, S. and Kouzani, A. Z. (2001) WoolNet : a hybrid artificial neural network wool fibre identifier, An Odyssey in Fibres and Space : Textile Institute 81st World Conference, Textile Institute, Manchester, England [E2.1]
DRO entry for this publication

Dingle, Matthew, Hodgson, Peter and Cardew-Hall, M.* (2001) Analysis of the elastic behaviour of the press system in draw die forming, in Demeri, Mahmoud Y. (eds), Innovations in materials processing and manufacturing: sheet metals, TMS, Warrendale, Pa. [EN]
DRO entry for this publication

Campbell, Peter, Cardew-Hall, Matthew John* and Hodgson, Peter (2001) Production decisions and lot sizing for automotive stamping, Proceedings of the SAE 2001 World Congresss, pp. 1-6, Society of Automotive Engineers, United States [L1]
DRO entry for this publication

Ferguson, Clive (2001) Developing professional engineering attributes through proximal and distance education, Learner-Centered Universities for the New Millennium international conference, pp. 115-120, Rand Afrikaans University, Johannesburg, South Africa [L2]
DRO entry for this publication

Long, John (2001) Depth-profile analysis of elements by glow discharge optical emmission specrometry, APCNDT 2001 : technology 2001 and beyond : Proceedings of the 10th Asia-Pacific Conference on Non-Destructive Testing, pp. 1-6, Australian Institute for Non Destructive Testing, Australia [L2]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2001

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

2001 - Doctor of Philosophy

Leon Burgess-Dean. Supervisor: Georgina Kelly
Thesis entitled: Predicting the Resistance of Fired Clay Products to Salt Attack.

Yuping Zhang. Supervisor: Xungai Wang
Thesis entitled: The Tensile Behaviour of Non-uniform Fibres and Fibrous Composites.

2001 - Doctor of Technology

John Cherian. Supervisor: Bantwal Baliga
Thesis entitled: Industrial and Economic Development: A Holistic Study of Brunei Darussalam.

2001 - Master of Engineering

Timothy Hosking. Supervisor: Bruce Hill
Thesis entitled: Yield Improvement for Graphitic Iron Castings.

Scott Savage. Supervisor: Peter Hodgson
Thesis entitled: Evaluation of Cold Forming Lubricants for Fastener Manufacturing.

2001 - Master of Science

Joanne Puckett. Supervisor: Selvadore Selvalingam
Thesis entitled: Water Quality Modelling of the Barwon Water Supply System.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 23rd July 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010