2002 School of Engineering Research Output
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
Barnett, Matthew, Kelly, Georgina and Hodgson, Peter (2002) Inferring dynamic recrystallization in ferrite using the kinetics of static recrystallization, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 33A, no. 7, pp. 1893-1900, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036650051DRO entry for this publication
Barnett, Matthew and Montheillet, F.* (2002) The generation of new high-angle boundaries in aluminium during hot torsion, Acta materialia, vol. 50, no. 9, pp. 2285-2296, Elsevier Science, New York, N.Y. [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-0037165884
Citation counts:Scopus - 52
Beltran, Rafael, Hurren, Christopher J., Kaynak, Akif and Wang, Xungai (2002) Correlating the fineness and residual gum content of degummed hemp fibres, Fibers and polymers, vol. 3, no. 4, pp. 129-133, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-21644460569
Citation counts:Thomson - 5
Brownrigg, Allan and Prior, G. K.* (2002) Hardenability reduction in VN microalloyed eutectoid steels, Scripta materialia, vol. 46, no. 5, pp. 357-361, Elsevier Science, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-0036499642
Citation counts:Choi, Sangwoo*, Lee, Youngseog* and Hodgson, Peter (2002) A comparative study of microstructures and mechanical properties obtained by bar and plate rolling, Journal of materials processing technology, vol. 124, no. 3, pp. 329-336, Elsevier Science B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: Not tagged
Citation counts:Choi, Sangwoo*, Lee, Youngseog*, Hodgson, Peter and Woo, Jong Soo* (2002) Feasibility study of partial recrystallisation in multi-pass hot deformation process and application to calculation of mean flow stress, Journal of materials processing technology, vol. 125, no. 126, pp. 63-71, Elsevier Science BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047844
Citation counts:Cizek, Pavel*, Wynne, B.*, Davies, Christopher*, Muddle, Barrington* and Hodgson, Peter (2002) Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 33, no. 5, pp. 1331-1349, ASM International, Warrendale, Pa. [C1]
ERA journal ID: 4729 – Scopus EID: Not tagged
Citation counts:de Ruyter, A.S., Cardew-Hall, M.J.* and Hodgson, Peter (2002) Estimating quality costs in an automotive stamping plant through the use of simulation, International journal of production research, vol. 40, no. 15, pp. 3835-3848, Institution of Production Engineers, London, England [C1]
ERA journal ID: 3609 – Scopus EID: 2-s2.0-18744399540
Citation counts:Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2002) Numerical simulation of heat and mass transfer in fluidised bed heat treatment furnaces, Journal of materials processing technology, vol. 125-126, no. 9, pp. 170-178, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047824
Citation counts:Gotzinger, Mary*, Kalyanasundaram, S.*, Cardew-Hall, M.* and Hodgson, Peter (2002) A methodology for springback prediction, SAE transactions, vol. 110, pp. 1181-1186, Society of Automotive Engineers, New York, N.Y. [C1]
ERA journal ID: 3550 – Scopus EID: Not taggedHe, Weiyu and Wang, Xungai (2002) The combined tensile and torsional behavior of irregular fibers, Fibers and polymers, vol. 3, no. 1, pp. 31-37, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-52649171525He, Weiyu and Wang, Xungai (2002) Mechanical behavior of irregular fibers part III : the flexural buckling behavior, Textile research journal, vol. 72, no. 7, pp. 573-578, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0036640755
Citation counts:Hoggan, E. J., Scott, R. I., Barnett, Matthew and Hodgson, Peter (2002) Mechanical properties of tension levelled and skin passed steels, Journal of materials processing technology, vol. 125-126, pp. 155-163, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047815
Citation counts:Hu, Eric (2002) CO2 credit or energy credit in emission trading?, Energy policy, vol. 30, no. 4, pp. 263-265, Elsevier Science, New York, N.Y. [C1]
ERA journal ID: 32863 – Scopus EID: 2-s2.0-0036502112Hurley, P. J.*, Muddle, B. C.* and Hodgson, Peter (2002) The production of ultrafine ferrite during hot torsion testing of a 0.11 Wt Pct C steel, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 33, no. 9, pp. 2985-2993, ASM International, Warrendale, Pa. [C1]
ERA journal ID: 4729 – Scopus EID: Not tagged
Citation counts:Kaynak, Akif, Wang, Lijing, Hurren, Chris and Wang, Xungai (2002) Characterization of conductive polyprrole coated wool yarns, Fibers and polymers, vol. 3, no. 1, pp. 24-30, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: Not tagged
Citation counts:Kelly, Georgina, Beladi, Hossein and Hodgson, Peter (2002) Ultrafine grained ferrite formed by interrupted hot torsion deformation of plain carbon steel, ISIJ international, vol. 42, no. 12, pp. 1585-1590, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-0036994014
Citation counts:Kong, Lingxue* and Nahavandi, Saeid (2002) On-line tool condition monitoring and control system in forging processes, Journal of materials processing technology, vol. 125, no. 126, pp. 464-470, Elsevier Science BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047912
Citation counts:Lee, Y.*, Choi, S.* and Hodgson, Peter (2002) Integrated model for thermo-mechanical controlled process in rod (or bar) rolling, Journal of materials processing technology, vol. 125, no. 126, pp. 678-688, Elsevier Science B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047812
Citation counts:Lee, Y.*, Choi, S.* and Hodgson, Peter (2002) Analytical model of pass-by-pass strain in rod (or bar) rolling and its applications to prediction of austenite grain size, Materials science and engineering A : structural materials: properties, microstructures and processing, vol. 336, no. 1-2, pp. 177-189, Elsevier Science, New York, N.Y. [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0037175002
Citation counts:Nave, Mark and Barnett, Matthew (2002) Recrystallization textures in course grained low carbon and interstitial free steels, Materials science forum, vol. 408-412, pp. 907-912, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Palmer, Stuart and Bray, Sharyn L. (2002) On- and off-campus student persistence and academic performance, Engineering science and education journal, vol. 11, no. 2, pp. 66-72, Institution of Electrical Engineers, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Palmer, Stuart and Bray, Sharyn L. (2002) An exercise to improve career understanding of commencing engineering and technology students, Australian journal of career development, vol. 11, no. 2, pp. 38-44, Australian Council for Educational Research, Hawthorn, Vic. [C1]
ERA journal ID: 20813 – Scopus EID: Not taggedPalmer, Stuart (2002) A review of strategic issues in using the internet for teaching and learning, Australasian journal of engineering education, vol. 1, pp. 1-11, Australasian Association for Engineering Education Inc, Sydney, N.S.W. [C1]
ERA journal ID: 40310 – Scopus EID: Not taggedPalmer, Stuart (2002) An evaluation of undergraduate engineering management studies, International journal of engineering education, vol. 18, no. 3, pp. 321-330, Dublin Institute of Technology, Tempus Publications, Dublin, Ireland [C1]
ERA journal ID: 20618 – Scopus EID: 2-s2.0-0036017103
Citation counts:Petrescu, D., Savage, S.C. and Hodgson, Peter (2002) Simulation of the fastener manufacturing process, Journal of materials processing technology, vol. 125-126, pp. 361-368, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047932
Citation counts:She, F. H., Kong, L. X., Nahavandi, S. and Kouzani, A. Z. (2002) Intelligent animal fiber classification with artificial neural networks, Textile research journal, vol. 72, no. 7, pp. 594-600, Sage, London, England [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0036639903
Citation counts:Timokhina, Ilana*, Hodgson, Peter and Pereloma, Elena* (2002) Effect of alloying elements on the microstructure property relationship in thermomechanically processed C-Mn-Si TRIP steels, Steel Research, vol. 73, no. 6-7, pp. 274-279, Verlag Stahleisen, Düsseldorf, Germany [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Trinh, Hieu, Nahavandi, Saeid and Fernando, T.* (2002) Constrained pole placement for linear systems using low-order output feedback controllers, International journal of systems science, vol. 33, no. 3, pp. 165-173, Taylor and Francis Ltd, London, England [C1]
ERA journal ID: 17961 – Scopus EID: 2-s2.0-0037138856White, Richard (2002) Incorporating sustainability in textile effluent treatment facilities, International Journal of environmental technology and management, vol. 2, no. 1-3, pp. 279-290, Inderscience Publishers, Onley, England [C1]
ERA journal ID: 5882 – Scopus EID: 2-s2.0-33749375795Xu, Jianying, Paimin, Rohani*, Shen, Wei* and Wang, Xungai (2002) A novel polymer membrane for extraction applications, Fibers and polymers, vol. 3, no. 2, pp. 68-72, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: Not tagged
Citation counts:You, Ying* and Hu, Eric (2002) A medium-temperature solar thermal power system and its efficiency optimisation, Applied thermal engineering, vol. 22, no. 4, pp. 357-364, Elsevier Science, Amsterdam, The Netherlands [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-0036489152
Citation counts:Zhang, S., Hodgson, Peter, Duncan, J.L.*, Cardew-Hall, M.J.* and Kalyanasundaram, S.* (2002) Effect of membrane stress on surface roughness changes in sheet forming, Wear, vol. 253, no. 5-6, pp. 610-617, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-0036751737
Citation counts:Zhang, S., Hodgson, Peter, Cardew-Hall, M.J.* and Kalyanasundaram, S.* (2002) A finite element simulation of micro-mechanical frictional behaviour in metal forming, Journal of materials processing technology, vol. 134, no. 1, pp. 81-91, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037364288
Citation counts:Zhang, Yuping, Wang, Xungai, Pan, Ning* and Postle, R.* (2002) Weibull analysis of the tensile behavior of fibers with geometrical irregularities, Journal of materials science, vol. 37, no. 7, pp. 1401-1406, Springer Netherlands, Dordrecht, The Netherlands [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-0036531180
Citation counts:Zheng, Hong, Kong, Lingxue* and Nahavandi, Saeid (2002) Automatic inspection of metallic surface defects using genetic algorithms, Journal of materials processing technology, vol. 125, no. 126, pp. 427-433, Elsevier Science B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-0037047855
Citation counts:Zou, L.Y and Hooper, M.A* (2002) Polycyclic aromatic hydrocarbon emission loads and profiles from the burning of locally grown wood species in Victoria, Australia - Some pilot project results, Clean air and environmental quality, vol. 36, no. 1, pp. 35-38, Clean Air Society of Australia & New Zealand, Mitcham, Vic. [C1]
ERA journal ID: 5811 – Scopus EID: Not taggedAldeen, Mohammed* and Trinh, Hieu (2002) Design of a distributed power system stabiliser, Journal of electrical and electronics engineering, vol. 22, no. 1, pp. 1-7, Institution of Engineers, Institution of Radio and Electronics Engineers, Australia, Barton, A.C.T. [C3]
ERA journal ID: 4399 – Scopus EID: Not tagged
Citation counts:Fabijanic, Dan, Kelly, Georgina, Cardew-Hall, Michael* and Hodgson, Peter (2002) Galling reduction through die surface treatment - testing three treatments for sheet metal stamping, Stamping journal, vol. 14, no. 2, pp. 30-31, Fabricators and Manufacturers' Association, Rockford, Ill. [C3]
ERA journal ID: Not matching ERA journal listAldeen, M.* and Trinh, Hieu (2002) Determination of structurally constrained controllors, in Hamza, M. H. (eds), Proceedings of the IASTED International Conference: Modelling, Identification and Control, pp. 331-336, ACTA Press, Anaheim, Calif. [E1]
Bankowski, Piotr, Zou, Linda, Hodges, Ray*, Singh, Puyam* and Trigg, Mark* (2002) Brown coal fly ash stabilisation by inorganic polymers, in Lukey, Grant C. (eds), Geopolymer 2002 : turn potential into profit, Geopolymer Institute, Saint-Quentin, France [E1]
Beer, Aiden and Barnett, Matthew (2002) The hot flow stress and microstructure in magnesium AZ31, in Kaplan, Howard (eds), Magnesium technology 2002 : proceedings of the symposium jointly sponsored by the Magnesium Committee of the Light Metals Division (LMD) of TMS (THe Minerals, Metals & Materials Society) with the International Magnesium Association : held during the 2002, pp. 193-198, TMS, Warrendale, Pa. [E1]
Cave, A., Nahavandi, Saeid and Kouzani, Abbas (2002) Scheduling through simulation optimization using iterative improvement, in Plaks, T. and Athanas, P. (eds), Proceedings of the International Conference on Engineering of Reconfigurable Systems and Algorithms, ERSA '02 : Las Vegas, Nevada, June 24 - 27, 2002, pp. 226-230, CSREA Press, Athens, Ga [E1]
Cave, Alex, Nahavandi, Saeid and Kouzani, Abbas (2002) Simulation optimization for process scheduling through simulated annealing, in Yucesan, Enver (eds), WCS'02 : exploring new frontiers, pp. 1909-1913, Association for Computing Machinery, New York, N.Y. [E1]
Creighton, Douglas and Nahavandi, Saeid (2002) On robust system design using discrete event simulation, in Spiridonov, P. and Nagalingam, S. (eds), Leadership of the future in manufacturing : proceedings : 8-10 February 2002, Adelaide Australia, pp. 89-94, Centre for Advanced Manufacturing Research, Mawson Lakes, S.Aust. [E1]
Creighton, Douglas and Nahavandi, Saeid (2002) The application of a reinforcement learning agent to a multi-product manufacturing facility, in Parnichkun, Manukid (eds), IEEE ICIT' 02 : 2002 IEEE International Conference on Industrial Technology : productivity reincarnation through robotics & automation : 11-14 December 2002, Shangri-La Hotel, Bangkok, Thailand, pp. 1229-1234, IEEE Xplore, Piscataway, N.J. [E1]
Frayman, Yakov, Rolfe, Bernard, Hodgson, Peter and Webb, G.I (2002) Predicting the rolling force in hot steel rolling mill using an ensemble model, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED International Conference, pp. 143-148, ACTA Press, New York, N.Y. [E1]
Gunn, Bruce and Nahavandi, Saeid (2002) Why initial conditions are important, in Yucesan, Enver (eds), WCS'02 : exploring new frontiers, pp. 557-562, Association for Computing Machinery, New York, N.Y. [E1]
Gunn, Bruce and Nahavandi, Saeid (2002) Using bottlenecks to control production inventory, in Plaks, Toomas P (eds), Proceedings of the International Conference on Engineering of Reconfigurable Systems and Algorithms, ERSA '02 : Las Vegas, Nevada, June 24 - 27, 2002, pp. 243-246, CSREA Press, Athens, Ga [E1]
Gunn, Bruce and Nahavandi, Saeid (2002) On work in progress optimisation, in Jamshidi, Mo (eds), Multimedia, image processing, and soft computing : trends, principles, and applications : proceedings of the Fifth Biannual World Automation Congress (WAC 2002), ISSCI 2002, and IFMIP 2002, Orlando, Florida, USA, pp. 631-636, IEEE Xplore, Piscataway, N.J. [E1]
Hu, Eric, Baziotopoulos, Con and Li, Yuncang (2002) Solar aided power generation from coal fired power stations: THERMSOLV software, in Duke, Richard (eds), AUPEC 2002 : conference proceedings, pp. 1-7, Monash University, Melbourne, Vic. [E1]
Hu, Eric, Zobec, M.*, Colombari, M.* and Kragh, M.* (2002) Advanced facades and HVAC systems: verification of an integrated design approach, in Luther, Mark (eds), Modern practice of architectural science : from pedagogy to andragogy? : proceedings of the 36th conference of the Australian and New Zealand Architectural Science Association, 1st to 4th November 2002, Deakin University, School of Architecture & Building, pp. 187-192, Deakin University, Geelong, Vic [E1]
Husband, S. and Palmer, Stuart (2002) Quality methods in Australian small and medium sized enterprises: a research framework, in Ho, Samuel K. M. and Dalrymple, John F. (eds), Change Management : proceedings of the 7th International Conference on ISO 9000 and TQM, pp. 379-385, RMIT & Hong Kong Baptist University, Melbourne, Vic. [E1]
Kouzani, Abbas, Nahavandi, Saeid, Kong, Lingxue*, Narayan, M. and Zheng, H. (2002) Detecting face component patterns within images using a multistage neural network, in Arabnia, Hamid R. and Mun, Youngsong (eds), Proceedings of the CISST'02 : proceedings of the International Conference on Imaging Science, Systems, and Technology : Las Vegas, Nevada, USA, June 24-27, 2002, pp. 825-829, CSREA Press, Athens, Ga [E1]
Mane, A., Nahavandi, Saeid and Zhang, J. (2002) Sequencing production on an assembly line using goal chasing and user defined algorithm, in Yucesan, Enver (eds), WCS'02 : exploring new frontiers, pp. 1269-1273, Association for Computing Machinery, New York, N.Y. [E1]
Nahavandi, Saeid and Kouzani, Abbas (2002) Modelling of a rotary pneumatic muscle, in Johnson, G.; Freckleton, J.; Nahavandi, Saeid; Saadat, M. and Weiming, S. (eds), Third International ICSC-NAISO Congress on World Manufacturing : WMC 2001 : program and proceedings : at the Rochester Institute of Technology, NY, USA, September 24-27, 2001, ICSC-NAISO Academic Press, New York, N.Y. [E1]
Nahavandi, Saeid, Kouzani, Abbas, Kong, Lingxue and Trinh, Hieu (2002) On performance evaluation of ultrasonically welded joints in automobiles, in Johnson, G.; Freckleton, J.; Nahavandi, Saeid; Saadat, M. and Weiming, S. (eds), Third International ICSC-NAISO Congress on World Manufacturing : WMC 2001 : program and proceedings : at the Rochester Institute of Technology, NY, USA, September 24-27, 2001, ICSC-NAISO Academic Press, New York, N.Y. [E1]
Norton, Lisa, Baskaran, Karagaratnam and McKenzie, Trevor (2002) 'Green' treatment of acid mine drainage - a step towards sustainability, in Angie Spry (ed.), Green processing 2002: International conference on the sustainable processing of minerals - proceedings, pp. 241-244, Australasian Institute of Mining and Metallurgy, Carlton, Vic. [E1]
Palmer, Stuart and Bray, Sharyn L. (2002) Changes in computer usage in engineering education, in Shankar, Krishna and Burrowes, Gunilla (eds), Conference proceedings, 13th Annual Conference for Australasian Association for Engineering Education and 8th Australasian Women in Engineering Forum, pp. 305-310, The Association, Canberra, A.C.T. [E1]
Refaat, Sameh*, Nahavandi, Saeid and Boland, P.* (2002) On rapid vector alignment in permanent magnet brushless motor, in Parnichkun, Manukid (eds), IEEE ICIT' 02 : 2002 IEEE International Conference on Industrial Technology : productivity reincarnation through robotics & automation : 11-14 December 2002, Shangri-La Hotel, Bangkok, Thailand, pp. 572-577, IEEE Xplore, Piscataway, N.J. [E1]
Rolfe, Bernard, Frayman, Yakov, Hodgson, Peter, Webb, G.I. and Kelly, Georgina (2002) Fault detection in a cold forging process through feature extraction with a neural network, in Hamza, M.H. (eds), Artificial intelligence and applications: proceedings of the second IASTED Conference, pp. 155-159, ACTA Press, New York, N.Y [E1]
Timokhina, I., Hodgson, Peter and Pereloma, E.* (2002) Effect of strain and morphology of the bainitic microstructure on the retained austenite stability and mechanical properties of thermomechanically processed C-Mn-Si(-Nb) TRIP steels, in De Cooman, Bruno C. (eds), Proceedings of International Conference on Trip-Aided High Strength Ferrous Alloys, pp. 181-185, Druck & Verlagshaus Mainz, Berlin, Germany [E1]
Trinh, Hieu, Zhang, J. and Nahavandi, Saeid (2002) Existence and design of reduced-order scalar functional observers, in Hamza, M.H. (eds), Intelligent systems and control : proceedings of the IASTED international conference ; October 1 - 4, 2002, Tsukuba, Japan, pp. 134-138, Acta Press, Anaheim, Calif. [E1]
Walsh, S. and Nahavandi, Saeid (2002) Simulating a reconfigurable manufacturing system, in Zayegh, Aladin (eds), Proceedings of the Fourth International Conference on Modelling and Simulation, pp. 458-463, Victoria University of Technology, Melbourne, Vic. [E1]
Wong, K. L. and Shihab, S.* (2002) Radiating signal model for broadband acoustic emission for high voltage equipment, PowerCon 2002 : 2002 International Conference on Power System Technology : proceedings : Kunming, China, pp. 1859-1862, Yunnan Science & Technology Press, Kunming, China [E1]
Xiao, Nan-Feng and Nahavandi, Saeid (2002) Visual learning control of a robot in an unknown environment, in Nahavandi, Saeid (eds), First International NAISO Congress on Autonomous Intelligent System : program and proceedings : at Waterfront Campus, Deakin University, Geelong, Australia, February 12-15, 2002, pp. 1-6, ICSC-NAISO Academic Press, Millet, Alba. [E1]
Xiao, Nan-Feng and Nahavandi, Saeid* (2002) A reinforcement learning approach for robot control in an unknown environment, IEEE ICIT' 02 : 2002 IEEE International Conference on Industrial Technology : productivity reincarnation through robotics & automation : 11-14 December 2002, Shangri-La Hotel, Bangkok, Thailand, pp. 1096-1099, IEEE Xplore, Piscataway, N.J. [E1]
Xiao, Nan-Feng and Nahavandi, Saeid (2002) An active stereo vision-based learning approach for robotic tracking, fixating and grasping control, in Parnichkun, Manukid (eds), IEEE ICIT' 02 : 2002 IEEE International Conference on Industrial Technology : productivity reincarnation through robotics & automation : 11-14 December 2002, Shangri-La Hotel, Bangkok, Thailand, pp. 584-587, IEEE Xplore, Piscataway, N.J. [E1]
Xiao, Nan-Feng and Nahavandi, Saeid (2002) Multi-agent model for robotic assembly system, in Jamshidi, M. (eds), Multimedia, image processing, and soft computing : trends, principles, and applications : proceedings of the Fifth Biannual World Automation Congress (WAC 2002), ISSCI 2002, and IFMIP 2002, Orlando, Florida, USA, pp. 1-6, TSI Press, Albuquerque, NM [E1]
Zheng, H., Nahavandi, Saeid and Kouzani, Abbas (2002) Adaptive color image enhancement for visual inspection using evolutionary algorithms, in Nahavandi, Saeid (eds), First International NAISO Congress on Autonomous Intelligent System : program and proceedings : at Waterfront Campus, Deakin University, Geelong, Australia, February 12-15, 2002, ICSC-NAISO Academic Press, Millet, Alba. [E1]
Zou, Linda, Zhang, Weidong*, Atkinson, Steven and Hooper, Martin* (2002) Characterisation of polycyclic aromatic hydrocarbons emission from wood combustion, in Bluett, Jeff (eds), Conference proceedings : 16th International Clean Air & Environment Conference, 19-22 August 2002, Christchurch, New Zealand., pp. 920-926, Clean Air Society of Australia and New Zealand Inc., Christchurch, N.Z. [E1]
Beltran, Rafael, Hurren, Christopher J., Kaynak, Akif and Wang, Xungai (2002) A new method of evaluating the fineness and residual gum content of hemp fibres, Proceedings of 2009 International Conference on Ecological Fabric in the 21st Century, pp. 1-12, Beijing Science and Technology Association, Beijing, China [E1.1]
Ghafouri, M. (2002) Flood spreading for sustainable water supply in arid and semi-arid regions of Iran, in Parker, John and Garman, David (eds), ENVIRO 2002 & IWA 3rd World Water Congress : A unique approach to a unique environment, AWA Bookshop, Melbourne, Vic. [E2]
Hurren, Christopher, Wang, Xungai, Dennis, Hamish G. S.* and Clarke, Adrian Frances K.* (2002) Evaluation of bast fibre retting systems on hemp, Through the eye of a needle, advances in fibre, fashion and fabric : Textile Institute : proceedings of the 82nd World Conference, The Textile Institute, Manchester, England [E2]
Kelly, Georgina and Hodgson, Peter (2002) Grain refinement through thermomechanical processing, in Bott, Ivani (eds), Aços : perspectivas para os próximos 10 anos, pp. 89-94, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil [E2]
Khalife, M., Dharmappa, H.* and Sivakumar, M.* (2002) Polishing septic tank effluent using plastic media, in Parker, John and Garman, David (eds), ENVIRO 2002 & IWA 3rd World Water Congress : A unique approach to a unique environment, p. 224, AWA Bookshop, Australia [E2]
Liu, Xin, Wang, Xungai and Wang, Lijing (2002) A study of Australian alpaca fibres, Proceedings of the third China International Wool Textile Conference, Xi'an, China, 2002, pp. 102-111, China Textile Press, Xi'an, China [E2]
Palmowski, L. and Muller, J.* (2002) Anaerobic degradation of organic materials - significance of the substrate surface area, in Parker, John and Garman, David (eds), ENVIRO 2002 & IWA 3rd World Water Congress : A unique approach to a unique environment, AWA Bookshop, Melbourne, Vic. [E2]
Singh, Avtar, Wang, Xungai and Wang, Lijing (2002) The Australian cashmere industry, Proceedings of the third China International Wool Textile Conference, Xi'an, China, 2002, pp. 463-467, China Textile Press, Xi'an, China [E2]
Timokhina, Ilana, Hodgson, Peter and Pereloma, Elena* (2002) Effect of alloying elements on the microstructure-property relationship in thermomechanically processed C-Mn-Si TRIP steels, in De Cooman, Bruno C. (eds), Proceedings of International Conference on Trip-Aided High Strength Ferrous Alloys, pp. 153-157, Druck & Verlagshaus Mainz, Berlin, Germany [E2]
Wang, Xungai, Wang, Lijing and Liu, Xin (2002) Fibre diameter and its variation after blending, Proceedings of the third China International Wool Textile Conference, Xi'an, China, 2002, pp. 355-361, China Textile Press, Xi'an, China [E2]
Wang, Xungai, He, Weiyu and Wang, Lijing (2002) An investigation into fibre irregularities, Through the eye of a needle, advances in fibre, fashion and fabric : Textile Institute : proceedings of the 82nd World Conference, The Textile Institute, Manchester, England [E2]
White, Richard (2002) Targeted engineering education : a case study of a postgraduate course in the automotive industry, in Pudlowski, Zenon and Grunwald, Norber (eds), Seminar proceedings : Hochschule Wismar - University of Technology, Business and Design, Wismar/Warnemünde, Germany, 23 - 25 September 2002, pp. 67-70, UNESCO International Centre for Engineering Education, Clayton, Vic. [E2]
White, Richard (2002) Postgraduate engineering education in innovation, in Pudlowski, Zenon and Grunwald, Norber (eds), Seminar proceedings : Hochschule Wismar - University of Technology, Business and Design, Wismar/Warnemünde, Germany, 23 - 25 September 2002, pp. 115-118, UNESCO International Centre for Engineering Education, Clayton, Vic. [E2]
Zheng, Hong, Pan, Li* and Nahavandi, Saeid (2002) Object extraction using genetic algorithms and morphological processing, in Zhao, DaZun; Luo, Ming Ronnier and Aizawa, Kiyoharu (eds), SPIE 2002 : Color science and imaging technologies : 16-17 October, 2002, Shanghai, China, pp. 92-98, SPIE, Washington, D.C. [E2]
Nahavandi, Saeid (2002) NAISO 2002 : First International NAISO Congress on Autonomous Intelligent System : program and proceedings : at Waterfront Campus, Deakin University, Geelong, Australia, February 12-15, 2002, in Nahavandi, Saeid (eds), ICSC-NAISO Academic Press, Millet, Alba. [E4]
He, Weiyu and Wang, Xungai (2002) Numerical modelling of the tensile behaviour of fibres with geometrical and structural irregularities, Polymer Fibres 2002 : conference program & extended abstracts, pp. 1-2, Manchester, England [L2]
Kaynak, Akif, Beltran, Rafael, Wang, Lijing and Wang, Xungai (2002) A study of conductive polypyrrole coated polyester fabrics and monofilaments, Polymer Fibres 2002 : conference program & extended abstracts, pp. 1-3, Manchester, England [L2]
Norton, Lisa and Baskaran, Kanagaratnam (2002) Innovative reuse of biosolids for the treatment of metals contaminated wastewaters, Proceedings of the Biosolids Specialty Conference, pp. 1-15, Australian Water Association, Artarmon, N.S.W. [L2]
Long, John (2002) Surface analysis of steel by glow-discharge optical emission spectrometry, 1st National Steel Processing & Performance Conference, pp. 1-10, Institute of Materials Engineering Australasia Ltd (IMEA), Geelong, Vic. [L3]
Toh, S. K.*, McCulloch, D.*, du Plessis, Johan*, Paterson, P. J. K.*, Hughes, A. E.*, Jamieson, D.*, Rout, B.*, Long, John and Stonham, A.* (2002) An investigation of the native oxide of aluminum alloy 7475-T7651 using XPS, AES, TEM, EELS, GDOES and RBS, 7th International Conference on the Structure of Surfaces, p. 1, World Scientific, Singapore [L3]
Grants and Consultancies
Grants with funding during 2002
Research Income - National Competitive Grants
Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]
- 2005: $24,388
- 2004: $48,296
- 2003: $47,226
- 2002: $46,066
Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]
- 2004: $11,943
- 2003: $23,853
- 2002: $23,033
- 2001: $22,545
Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]
- 2005: $11,141
- 2004: $24,148
- 2003: $23,613
- 2002: $23,033
Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]
- 2005: $12,194
- 2004: $48,296
- 2003: $47,226
- 2002: $46,066
Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]
- 2004: $68,583
- 2003: $67,032
- 2002: $73,570
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]
- 2004: $76,513
- 2003: $117,047
- 2002: $46,066
Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]
- 2004: $244
- 2003: $11,647
- 2002: $23,033
- 2001: $22,545
- 2000: $21,869
Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]
- 2004: $11,943
- 2003: $23,853
- 2002: $23,033
- 2001: $22,545
Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]
- 2004: $94,327
- 2003: $102,644
- 2002: $88,904
Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]
- 2004: $60,026
- 2003: $58,654
- 2002: $30,656
Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]
- 2003: $11,669
- 2002: $23,033
- 2001: $22,545
- 2000: $21,869
Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]
- 2003: $60,910
- 2002: $53,999
- 2001: $55,124
Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]
- 2003: $62,506
- 2002: $60,749
- 2001: $68,379
Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]
- 2003: $23,853
- 2002: $23,033
- 2001: $22,545
Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]
- 2003: $57,780
- 2002: $95,566
- 2001: $96,799
Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]
- 2003: $2,095
- 2002: $13,182
Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]
- 2002: $11,386
- 2001: $2,072
- 2000: $21,869
- 1999: $21,080
Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]
- 2002: $11,386
- 2001: $22,545
- 2000: $21,869
- 1999: $24,980
Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]
- 2002: $104,950
- 2001: $99,915
- 2000: $96,105
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]
- 2002: $47,970
Research Income - Other Public Sector Funding
Littlejohn, M. Innovation Co-Ordinator [U]
- 2002: $126,000
Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]
- 2002: $3,750
Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]
- 2002: $842,500
Research Income - Industry and Other Funding
Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]
- 2004: $12,000
- 2003: $12,000
- 2002: $12,000
Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]
- 2002: $377,216
Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]
- 2004: $7,500
- 2003: $7,500
- 2002: $7,500
Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]
- 2002: $689,684
Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]
- 2004: $30,000
- 2003: $30,000
- 2002: $30,000
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]
- 2004: $25,000
- 2003: $25,000
- 2002: $25,000
Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]
- 2004: $4,990
- 2003: $30,000
- 2002: $30,000
Hodgson, P. Optimisation of the crankshaft pin grinding process [V]
- 2003: $5,000
- 2002: $5,185
- 2001: $5,000
Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]
- 2003: $5,000
- 2002: $5,000
- 2001: $5,000
Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]
- 2003: $5,000
- 2002: $5,000
- 2001: $5,000
Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]
- 2003: $7,500
- 2002: $7,500
Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]
- 2003: $20,000
- 2002: $40,000
Hodgson, P. Stamping Technology for Automotive Processes [V]
- 2003: $38,432
- 2002: $49,262
Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]
- 2002: $39,500
- 2001: $45,000
- 2000: $45,000
Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]
- 2002: $30,800
- 2000: $26,600
Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]
- 2002: $8,000
- 2000: $8,000
Nahavandi, S. PhD Scholarship - Arvind Mane [V]
- 2002: $5,000
- 2001: $56,000
Nahavandi, S. PhD Scholarship - Arvind Mane [V]
- 2002: $5,000
Palmowski, L. Evaluation of Wastewater treatment plant performance [V]
- 2002: $8,545
Wang, X. Developing very fine and soft worsted yarns [V]
- 2002: $98,852
Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]
- 2002: $6,800
Research Income - Industry and Other Funding - Australian
Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]
- 2005: $35,000
- 2004: $50,000
- 2002: $95,000
- 2001: $50,000
Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]
- 2005: $50,000
- 2004: $50,000
- 2003: $50,000
- 2002: $50,000
- 2001: $125,000
- 2000: $175,000
- 1999: $200,000
Higher Degree by Research Completions
2002 - Doctor of Philosophy
Kenneth Browne. Supervisor: Allan Brownrigg
Thesis entitled: Available Energy: Unified Concepts for Classical and Irreversible Thermodynamics.Matthew Dingle. Supervisor: Peter Hodgson
Thesis entitled: Elastic Behaviour in Mechanical Draw Presses.Wendy Weiyu He. Supervisor: Xungai Wang
Thesis entitled: The Mechanical Behaviour of Irregular Fibre Materials.Timothy Hilditch. Supervisor: Peter Hodgson
Thesis entitled: Sheared-Edge Quality in the Trimming of Sheet Metals.Mary Fenghua She. Supervisor: Saeid Nahavandi
Thesis entitled: Intelligent Animal Fibre Identification and Classification.2002 - Doctor of Technology
Hin Piu Chau. Supervisor: Bantwal Baliga
Thesis entitled: Relationship between Advanced Manufacturing Technologies (AMTs) and Workforce Development Activities.Palitha Kuruppuarachachi. Supervisor: Ross Smith
Thesis entitled: Towards Managing User Resistance in Large ICT Projects.Stuart Palmer. Supervisor: Peter Hodgson
Thesis entitled: An Evaluation of Australian Undergraduate Engineering Management Education for Flexible Delivery.Laurence Sparke. Supervisor: Brian Lloyd
Thesis entitled: Vehicle Design for Minimum Societal Harm.Craig Walker. Supervisor: Allan Brownrigg
Thesis entitled: Wear in Centrifugal Slurry Pumps.2002 - Master of Engineering
Lee Berger. Supervisor: Bruce Hill
Thesis entitled: Leaker Reduction in Low Pressure Die Casting.Bruce Gunn. Supervisor: Saeid Nahavandi
Thesis entitled: Development of an Optimum Factory Model for a Manufacturing Operation through Computer Simulation.David Haynes. Supervisor: Peter Hodgson
Thesis entitled: Press Forming Performance of Galvanneal Coated Steel.Christopher Miller. Supervisor: Peter Hodgson
Thesis entitled: Tailoring a Lubricant for use with ZINCANNEAL® Steel.Annmarie Tracey. Supervisor: Richard White
Thesis entitled: Investigation of Effluent Treatment for an Integrated Textile Facility.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Wednesday 22nd May 2013 10:04pm
