Research Services Division

Deakin Research

2003 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Wang, Xungai, Wang, Lijing and Liu, Xin (2003) The quality and processing performance of alpaca fibres, Rural Industries Research and Development Corporation (RIRDC), Barton, A.C.T. [A2]
DRO entry for this publication

Pathirana, Pubudu, Duncan, Stephen* and Jones, Paul* (2003) Control of average temperature in a spray deposition process, IEEE Society of Manufacturing Engineers, Piscataway, NJ [A6]
DRO entry for this publication

Nasu, Yasuo*, Kaneko, Shin-Ichiro*, Yamano, M.*, Capi, G.* and Nahavandi, Saeid (2003) Application of a CORBA - based humanoid robot system for accident site inspection through the internet, in Mastorakis, Nikos E. (eds), Computational methods in circuits and systems applications, pp. 177-184, WSEAS Press, United States [B2]
DRO entry for this publication

Barnett, Matthew (2003) Quenched and annealed microstructures of hot worked magnesium AZ31, Materials transactions, vol. 44, no. 4, pp. 571-577, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-0037530195
Citation counts: Scopus - 36
DRO entry for this publication

Barnett, Matthew (2003) Hot working microstructure map for magnesium AZ31, Materials Science Forum, vol. 426-432, pp. 515-520, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 11
DRO entry for this publication

Barnett, Matthew (2003) A Taylor Model Based Description of the proof stress of magnesium AZ31 during hot working, Metallurgical and materials transactions A, vol. 34, no. 9, pp. 1799-1806, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0141519677
Citation counts: Scopus - 95, Thomson - 83
DRO entry for this publication

Barnett, Matthew (2003) Recrystallization during and following hot working of magnesium alloy AZ31, Materials science forum, vol. 419, no. 422, pp. 503-508, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 30
DRO entry for this publication

Baskaran, Kanagaratnam, Palmowski, Laurence and Watson, B. M. (2003) Wastewater reuse and treatment options for the dairy industry, Water supply : the review journal of the International Water Supply Association, vol. 3, no. 3, pp. 85-91, IWA Publishing, London, England [C1]
ERA journal ID: 4310 – Scopus EID: 2-s2.0-0037925404
Citation counts: Scopus - 15
DRO entry for this publication

Chang, Lingli, Tang, Zheng-Xue and Wang, Xungai (2003) Effect of yarn hairiness on energy consumption in rotating a ring-spun yarn package, Textile research journal, vol. 73, no. 11, pp. 949-954, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0344552777
Citation counts: Scopus - 15
DRO entry for this publication

Chang, Lingli and Wang, Xungai (2003) Comparing the hairiness of solospun and ring spun worsted yarns, Textile research journal, vol. 73, no. 7, pp. 640-644, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0041339604
Citation counts: Scopus - 20, Thomson - 20
DRO entry for this publication

Creighton, Douglas and Nahavandi, Saeid (2003) Application of a discrete event simulation for robust system design of a melt facility, Robotics and computer-integrated manufacturing, vol. 19, no. 6, pp. 469-477, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 41932 – Scopus EID: 2-s2.0-0142061488
Citation counts: Scopus - 7, Thomson - 3
DRO entry for this publication

Fernando, T.*, Trinh, Hieu and Nahavandi, Saeid (2003) Lower bounds for stability margin of n-dimensional discrete systems, Computers & electrical engineering, vol. 29, no. 8, pp. 861-871, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 4403 – Scopus EID: 2-s2.0-0042831191
DRO entry for this publication

Ha, Q. P.*, Trinh, Hieu, Nguyen, H.* and Tuan, H. D.* (2003) Dynamic output feedback sliding-mode control using pole placement and linear functional observers, IEEE transactions on industrial electronics, vol. 50, no. 5, pp. 1030-1037, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 3598 – Scopus EID: 2-s2.0-0141987485
Citation counts: Scopus - 28, Thomson - 17
DRO entry for this publication

Harris, S. G.*, Doyle, E. D.*, Vlasveld, A. C.*, Audy, J.*, Long, John and Quick, D.* (2003) Influence of chromium content on the dry machining performance of cathodic arc evaporated TiA1N coatings, Wear, vol. 254, pp. 185-194, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-0037259734
Citation counts: Scopus - 42, Thomson - 37
DRO entry for this publication

He, Weiyu and Wang, Xungai (2003) Modeling the tensile behavior of fibers with geometrical and structural irregularities, International journal of engineering. Transactions A: basics, vol. 16, no. 4, pp. 393-412, Materials and Energy Research Center (M E R C), Islamic Republic of Iran [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hua, Yingbo*, An, Senjian* and Xiang, Yong (2003) Blind identification of FIR MIMO channels by decorrelating subchannels, IEEE transactions on signal processing, vol. 51, no. 5, pp. 1143-1155, Institute of Electrical and Electronics Engineers, Inc., New York, N.Y. [C1]
ERA journal ID: 4462 – Scopus EID: 2-s2.0-0038397761
Citation counts: Scopus - 41, Thomson - 31
DRO entry for this publication

Jones, T. Trevor and Joordens, Matthew (2003) Distance learning for laboratory practical work in microcontrollers, International journal of engineering education, vol. 19, no. 3, pp. 455-459, Tempus Publications, Hamburg, Germany [C1]
ERA journal ID: 20618 – Scopus EID: 2-s2.0-0042744726
Citation counts: Scopus - 3
DRO entry for this publication

Kaynak, Akif and Beltran, Rafael (2003) Effect of synthesis parameters on the electrical conductivity of polypyrrole-coated poly(ethylene terephthalate) fabrics, Polymer international, vol. 52, no. 6, pp. 1021-1026, Wiley Interscience, Malden, Mass. [C1]
ERA journal ID: 1693 – Scopus EID: 2-s2.0-0037861844
Citation counts: Scopus - 53, Thomson - 50
DRO entry for this publication

Khoddam, S.* and Hodgson, Peter (2003) A new method to determine the strain and strain rate hardening characteristics from the hot torsion test, Materials science forum, vol. 426, no. 432, pp. 1373-1378, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kim, Y. H.*, Ma, Xiang, Hodgson, Peter and Barnett, Matthew (2003) Multi equal channel angular pressing with rotational dies, Materials science forum, vol. 426, no. 432, pp. 2777-2782, Trans Tech Publications, Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Liu, Xin, Hurren, Christopher J. and Wang, Xungai (2003) Comparative analysis of two selective bleaching methods on alpaca fibers, Fibers and polymers, vol. 4, no. 3, pp. 124-128, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: Not tagged
Citation counts: Thomson - 7
DRO entry for this publication

Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2003) Experimental and theoretical investigation of compression of a cylinder using a rotating platen, International journal of mechanical sciences, vol. 45, no. 10, pp. 1717-1737, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-1342281096
Citation counts: Scopus - 3
DRO entry for this publication

Nave, Mark, Dahle, Arne* and St John, David* (2003) Method for determining reaction rate of mild steel containers during melting of magnesium-aluminium alloys and effect of aluminium content on directionally solidified microstructures, International journal of cast metals research, vol. 16, no. 4, pp. 427-433, Castings Development Centre, United Kingdom [C1]
ERA journal ID: 4719 – Scopus EID: 2-s2.0-0242302568
Citation counts: Scopus - 1
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2003) Grain size effect on behaviour and microstructure of a warm deformed Ti-IF steel, Materials science forum, vol. 426, no. 432, pp. 1279-1284, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Palmer, Stuart (2003) Framework for undergraduate engineering management studies, Journal of professional issues in engineering education & practice, vol. 129, no. 2, pp. 92-99, American Society of Civil Engineers, Reston, Va. [C1]
ERA journal ID: 4362 – Scopus EID: 2-s2.0-13944276425
Citation counts: Scopus - 6, Thomson - 2
DRO entry for this publication

Palmer, Stuart (2003) Postgraduate management study options for engineers, International journal of continuing engineering education and life-long learning, vol. 13, no. 5/6, pp. 546-555, Inderscience Enterprises Ltd., Olney, England [C1]
ERA journal ID: 20661 – Scopus EID: 2-s2.0-1642289892
Citation counts: Scopus - 1
DRO entry for this publication

Palmer, Stuart and Bray, Sharyn (2003) Comparative academic performance of engineering and technology students at Deakin University, Australia, International journal of continuing engineering education and life-long learning, vol. 13, no. 1, pp. 132-147, Inderscience Enterprises, Geneva, Switzerland [C1]
ERA journal ID: 20661 – Scopus EID: 2-s2.0-0038236989
DRO entry for this publication

Palmer, Stuart and Wang, Xungai (2003) Objective classification of fabric pilling based on the two-dimensional discrete wavelet transform, Textile research journal, vol. 73, no. 8, pp. 713-720, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0041730226
Citation counts: Scopus - 30, Thomson - 29
DRO entry for this publication

Palmer, Stuart (2003) Evaluating on-line technology to support students studying engineeering management in summer semester, Summer academe: a journal of higher education, vol. 4, pp. 59-70, Caddo Gap Press, San Francisco, Calif. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Palmowski, Laurence (2003) Anaerobic treatment of juice and fruit-processing effluents, Water, vol. 30, no. 6, pp. 20-25, Australian Water Association, Melbourne, Vic. [C1]
ERA journal ID: 3565 – Scopus EID: 2-s2.0-0242658953
DRO entry for this publication

Palmowski, Laurence and Muller, J.* (2003) Anaerobic degradation of organic materials - significance of the substrate surface area, Water science and technology, vol. 47, no. 12, pp. 231-238, Pergamon, Oxford, England [C1]
ERA journal ID: 4696 – Scopus EID: 2-s2.0-0042624842
Citation counts: Scopus - 32
DRO entry for this publication

Rolfe, Bernard, Cardew-Hall, M.*, Abdallah, S.* and West, G.* (2003) Using geometric shape variations to create an inverse model for a sheet metal process, Proceedings of the Institution of Mechanical Engineers. Part B, Journal of engineering manufacture, vol. 217, no. 12, pp. 1665-1675, Mechanical Engineering Publications Ltd., London, England [C1]
ERA journal ID: 3620 – Scopus EID: 2-s2.0-0347760055
DRO entry for this publication

Rolfe, Bernard, Cardew-Hall, M. J.*, Abdallah, S. M.* and West, G. A. W.* (2003) A shape error metric for sheet metal forming and its application to springback, Journal of manufacturing science and engineering, vol. 125, no. 3, pp. 468-475, ASME International, New York, N.Y. [C1]
ERA journal ID: 3614 – Scopus EID: 2-s2.0-0041733416
Citation counts: Scopus - 4
DRO entry for this publication

Roucoules, C.*, Pietrzyk, M.* and Hodgson, Peter (2003) Analysis of work hardening and recrystallization during the hot working of steel using a statistically based internal variable model, Materials science and engineering A, vol. 339, no. 1-2, pp. 1-9, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0037413780
Citation counts: Scopus - 36, Thomson - 34
DRO entry for this publication

Savkin, Andrey*, Pathirana, Pubudu and Faruqi, Farhan* (2003) Problem of precision missile guidance: LQR and H‡ control frameworks, IEEE transactions on aerospace and electronic systems, vol. 39, no. 3, pp. 901-910, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, N.J. [C1]
ERA journal ID: 4441 – Scopus EID: 2-s2.0-0345566280
Citation counts: Scopus - 45
DRO entry for this publication

Shokouhi, A., Beladi, Hossein and Hodgson, Peter (2003) A study on ultrafine ferrite formation during post deformation cooling, Materials science forum, vol. 426, no. 432, pp. 1295-1300, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Timokhina, I.B., Hodgson, Peter and Pereloma, E.V.* (2003) Effect of deformation schedule on the microstructure and mechanical properties of a thermomechanically processed C-Mn-Si transformation-induced plasticity steel, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 34A, no. 8, pp. 1599-1609, ASM International, Warrendale, PA [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0041561073
Citation counts: Scopus - 52, Thomson - 42
DRO entry for this publication

Toh, S. K.*, McCulloch, D. G.*, du Plessis, J.*, Paterson, P. J. K.*, Hughes, A. E.*, Jamieson, D.*, Rout, B.*, Long, J. M. and Stonham, A.* (2003) An investigation of the native oxide of aluminum alloy 7475-T7651 using XPS, AES, TEM, EELS, GDOES, RBS., Surface review and letters, vol. 10, no. 2-3, pp. 365-371, World Scientific Publishing Co., Singapore [C1]
ERA journal ID: 1152 – Scopus EID: 2-s2.0-0042346251
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Treloar, Graham J., Gupta, Hani, Love, Peter E.D. and Nguyen, Binh (2003) An analysis of factors influencing waste minimisation and use of recycled materials for the construction of residential buildings, Management of environmental quality, vol. 14, no. 1, pp. 134-145, Emerald, Bingley, England [C1]
ERA journal ID: 5887 – Scopus EID: Not tagged
DRO entry for this publication

Verbeken, K.*, Nave, Mark, Kestens, L.* and Barnett, Matthew (2003) Selective growth in a scratched Fe-2.8%Si single crystal, Materials science forum, vol. 426-432, pp. 3757-3762, Trans Tech Publications, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Wang, Xungai and Chang, Lingli (2003) Reducing yarn hairiness with a modified yarn path in worsted ring spinning, Textile research journal, vol. 73, no. 4, pp. 327-332, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-0038731236
Citation counts: Scopus - 32
DRO entry for this publication

Xu, Jianying, Paimin, Rohani*, Shen, Wei* and Wang, Xungai (2003) An investigation of solubility of aliquat 336 in different extracted solutions, Fibers and polymers, vol. 4, no. 1, pp. 27-31, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-9144230758
Citation counts: Scopus - 7, Thomson - 6
DRO entry for this publication

Zhang, Yuping, Wang, Xungai and Pan, Ning* (2003) An experimental examination of fiber reinforcing effect with a novel composite specimen, Composites part B : engineering, vol. 34, no. 5, pp. 499-505, Elsevier Science, Amsterdam, The Netherlands [C1]
ERA journal ID: 4883 – Scopus EID: 2-s2.0-0038824092
DRO entry for this publication

Zou, Linda, Zhang, Weidong* and Atkinson, Steven (2003) The characterisation of polycyclic aromatic hydrocarbons emissions from burning of different firewood species in Australia, Environmental pollution, vol. 124, no. 2, pp. 283-289, Pergamon, Oxford, England [C1]
ERA journal ID: 5823 – Scopus EID: 2-s2.0-0037411396
Citation counts: Scopus - 24, Thomson - 21
DRO entry for this publication

Zou, Linda and Atkinson, Steven (2003) Characterising vehicle emissions from the burning of biodiesel made from vegetable oil, Environmental technology, vol. 24, no. 10, pp. 1253-1260, Taylor & Francis, Abingdon, England [C1]
ERA journal ID: 4675 – Scopus EID: 2-s2.0-0345328311
Citation counts: Scopus - 38
DRO entry for this publication

Wen, C. E., Mabuchi, M.*, Yamada, Y.*, Shimojima, K.*, Chino, Y.*, Hosokawa, H.* and Asahina, T.* (2003) Processing of fine-grained aluminum foam by spark plasma sintering, Journal of materials science letters, vol. 22, no. 1407-1409, pp. 1407-1409, Kluwer Academic Publishers, Norwell, Mass. [C1.1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-0242333292
Citation counts: Scopus - 35, Thomson - 36
DRO entry for this publication

Wang, Xungai and He, Wendy (2003) Mechanical properties of irregular fibers, International journal of engineering - Transactions A: basics, vol. 16, no. 1, pp. 99-108, Materials and Energy Research Center (M E R C), Tehran, Islamic Republic of Iran [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Aldeen, M.* and Trinh, H. (2003) Design of minimal-order stabilisers for multi-machine unstable power systems, in Alvarez, C. and Hamza, M. (eds), IASTED 2003 : Proceedings of the Third International Association of Science and Technology for Development International Conference on European Power and Energy Systems, pp. 578-583, ACTA Press, United States [E1]
DRO entry for this publication

Atwell, Dale and Barnett, Matthew (2003) Grain size effect on load limited extrusion of AZ31, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003, pp. 361-363, CAST, Brisbane, Qld [E1]
DRO entry for this publication

Barnett, Matthew (2003) Hot working magnesium AZ31, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure and Control: Conference Proceedings, pp. 56-62, University of Sheffield, Dept. of Engineering Materials, Sheffield, England [E1]
DRO entry for this publication

Barnett, Matthew, Yao, J.* and Davies, C.* (2003) Extrusion limits for AZ alloys with Al contents <3%, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003, pp. 333-338, CAST, Brisbane, Qld [E1]
DRO entry for this publication

Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2003) Formation of ultra-fine ferrite by deformation of austenite during single pass rolling, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 252-257, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Bhatti, Asim, Nahavandi, Saeid and Zheng, Hong (2003) Disparity estimation using TI multi-wavelet transform, in Dhompongsa, Sompong (eds), InTech 03 : Proceedings of the Fourth International Conference on Intelligent Technologies, pp. 411-418, Chiang Mai University, Institute for Science and Technology Research and Development, Chiang Mai, Thailand [E1]
DRO entry for this publication

Bhatti, Asim, Nahavandi, Saeid and Zheng, Hong (2003) Image matching using TI multi-wavelet transform, in Sun, Changming; Talbot, Hugues; Ourselin, Sabastien and Adriaansen, Tony (eds), Digital image computing : techniques and applications ; proceedings of the VIIth Biennial Australian Pattern Recognition Society Conference, DICTA 2003, pp. 937-946, CSIRO Publishing, Melbourne, Vic. [E1]
DRO entry for this publication

Bhatti, Asim, Nahavandi, Saeid and Zheng, H. (2003) Stereo image matching using multi-wavelets, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003 : 18-20 September 2003, Brisbane, Australia, pp. 235-238, CAST, Brisbane, Qld. [E1]
DRO entry for this publication

Binney, Matthew*, Dargusch, Matt*, Nave, Mark and McKinney, Peter* (2003) Porosity reduction in a high pressure die casting through the use of squeeze pins, in Peterson, Donna (eds), 2003 Transactions Congress Sessions 22nd International Die Casting Congress and Exposition: Die casting in the heartland, pp. 405-410, North American Die Casting Association, Rosemont, Ill. [E1]
DRO entry for this publication

Binney, Matthew*, Dargusch, Matthew*, Nave, Mark and McKinney, Peter* (2003) Squeeze pin implementation in a high pressure die casting, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference, pp. 239-242, CAST, Brisbane, Qld. [E1]
DRO entry for this publication

Boelen, R.*, Thomson, P.* and Brownrigg, Allan (2003) Controlled oxidation rolling, in Palmiere, Eric; Mahfouf, Mahdi and Pinna, Christophe (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control, pp. 103-108, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Cardew-Hall, M.*, Pantano, V.* and Hodgson, Peter (2003) The changing nature of university-industry research alliances, in Mo, John (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., CSIRO Manufacturing and Infrastructure Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Cheesewright, G.*, Cardew-Hall, M.*, Hodgson, Peter, Rolfe, Bernard and Frayman, Yakov (2003) Press shop machine analysis and trending, in Deisenroth, Michael (eds), ICPR-17 : Electronic proceedings the 17th International Conference on Production Research, pp. 1-9, Virginia Tech, Blacksburg, Va. [E1]
DRO entry for this publication

Cheesewright, G.*, Dingle, Matthew, Rolfe, Bernard, Frayman, Yakov and Cardew-Hall, M.* (2003) Development of touchscreen fault recording for an automotive press shop, in Brown, R H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia, the Conference, Melbourne, Vic. [E1]
DRO entry for this publication

Crane, Lincoln*, Dingle, Matthew and Cardew-Hall, Michael* (2003) Computer aided ultrasonic thickness strain analysis of automotive sheet metal stampings using FEA information, in Brown, R H (eds), ICME 2003 Conference proceedings, Association for Manufacturing Excellence, Melbourne, Vic [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Carburising and carbon transfer coefficient in a fluidised bed furnance, in Brown, R H (eds), ICME 2003 : Conference proceedings of the 9th International Conference on Manufacturing Engineering, pp. 1-12, ICME, Melbourne, Vic. [E1]
DRO entry for this publication

Ghafouri, Mohammad, Heng, S.* and Baskaran, Kanagaratnam (2003) Scale effects on reuse of stormwater in semi-arid zones of Australia, in Cadee, Keith (eds), Ozwater Convention and Exhibition : innovations in water : Proceedings of the 20th Australian Water Association Convention 2003, pp. 1-9, Australian Water Association, St Leonards, NSW [E1]
DRO entry for this publication

Gunn, Bruce (2003) Simulating the change from a push to pull production system, in Brown, R. H. (eds), ICME 2003 : Conference proceedings of the 9th International Conference on Manufacturing Engineering, pp. 1-12, ICME, Melbourne, Vic. [E1]
DRO entry for this publication

Gunn, Bruce, Wang, L.* and Nahavandi, Saeid (2003) Systematic cycle time reduction in high pressure die casting, in Peterson, Donna (eds), Transactions : 22nd International Die Casting Congress and Exposition : Die casting in the heartland : September 15-17, 2003, Indianapolis, Indiana, pp. 75-82, North American Die Casting Association, Rosemont, Ill. [E1]
DRO entry for this publication

Gunn, Bruce, Wang, L.*, Ongoco, C.*, Matthews, D.*, Nahavandi, Saeid, Luxford, G.*, Law, J.*, Savage, G.* and Smyth, R.* (2003) Implementing reductions in die casting cycle time : a case study, in Dahle, Arne (eds), LMT 2003 : Proceedings of the 1st International Light Metals Technology Conference 2003 : 18-20 September 2003, Brisbane, Australia, pp. 199-202, CAST, Brisbane, Qld. [E1]
DRO entry for this publication

Hildebrand, N. R. B.* and Nave, Mark (2003) Cracking and blowout in an aluminium high-pressure die casting die, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference, pp. 227-230, CAST, Brisbane, Qld. [E1]
DRO entry for this publication

Hodgson, Peter, Barnett, Matthew, Beladi, Hossein and Kelly, Georgina (2003) The production of ultrafine grained steels by thermomechanical processing, in Palmiere, E. J.; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 170-175, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Hu, Eric, Zou, L. and Roberts, M. (2003) Interlink decision making index (IDMI) -- a simple tool/concept to assist decision making for sustainability Part 1: definition of IDMI, in Akiyoshi, Yuuko; Kinoshita, M.; Nitta, Y.; Yasuda, Y. and Yoshimo, F. (eds), Proceedings of the Asia-Pacific Conference on Sustainable Energy and Environmental Technologies, pp. 261-265, Japan Macro-Engineers Society, Yokkaichi, Japan [E1]
DRO entry for this publication

Hu, Eric, Zou, Linda, Langston, Craig and Huang, Wei* (2003) Using an IDMI methodology to make multi-criteria decisions, in Iorizzo, Jeanette (eds), ISWA 2003 : ISWA World Congress 2003 & Ozwaste Trade Exhibition proceedings : Sustainability in a new world, pp. 1-13, ISWA, Melbourne, Vic. [E1]
DRO entry for this publication

Hu, Eric, You, Y.* and Li, Yuncang (2003) Solar adsorption refrigeration : an alternative/auxiliary way for thermal storage for air conditioning, in Saman, W. Y. and Charters, WWS (eds), Bringing solar down to earth : ISES 2001 Solar World Congress, Adelaide Australia, 25-30 November 2001 : proceedings, pp. 681-686, Australian and New Zealand Solar Energy Society, Adelaide, S.Aust. [E1]
DRO entry for this publication

Hu, Eric, Zou, L. and Roberts, M. (2003) Interlink decision making index (IDMI) : a simple tool/concept to assist decision making for sustainability part 2 : calculation and examples of IDMI, in Akiyoshi, Yuuko; Kinoshita, M.; Nitta, Y.; Yasuda, Y. and Yoshimo, F. (eds), Proceedings of the Asia-Pacific Conference on Sustainable Energy and Environmental Technologies, pp. 266-270, Japan Macro-Engineers Society, Yokkaichi, Japan [E1]
DRO entry for this publication

Joordens, Matthews (2003) Flowchart software for a modular robot, in Brown, Allison (eds), AAEE 2003 : Engineering education for a sustainable future : proceedings of the 14th Annual Conference for Australasian Association for Engineering Education and 9th Australasian Women in Engineering Forum, 29th September - 1st October 2003, [held at] RMI, pp. 544-550, Australasian Association for Engineering Education, Melbourne, Vic. [E1]
DRO entry for this publication

Joordens, Matthew (2003) Flowchart and kernel software for modular robot, in Debnath, Narayan; Montejano, German and Riesco, Daniel (eds), CSITeA'03: Proceedings of the International Conference on Computer Science, Software Engineering, Information Technology, e-Business and Applications, pp. 500-504, International Society for Computers and Their Applications (ISCA), Rio de Janeiro, Brazil [E1]
DRO entry for this publication

Khalife, Mohsen, Baskaran, Karagaratnam and Dyall, Rohan (2003) Review of greywater reuse practices in Victoria, in Patterson, Robert A. and Jones, Malcolm J. (eds), On-site '03 : proceedings of On-Site '03 Conference : future directions for on-site systems, best management practice, held at University of New England, 30th September-2nd October 2003, pp. 209-216, Lanfax Laboratories, Armidale, N.S.W. [E1]
DRO entry for this publication

Khalife, Mohsen (2003) Modifications to conventional septic systems & improved quality effluent, in Patterson, Robert A. and Malcolm, Jones (eds), On-site '03 : proceedings of On-Site '03 Conference : future directions for on-site systems, best management practice, held at University of New England, 30th September-2nd October 2003, pp. 217-224, Lanfax Laboratories, Armidale, N.S.W. [E1]
DRO entry for this publication

Khan, M. Imad*, Nahavandi, Saeid and Frayman, Yakov (2003) Improving the quality of die castings by using artificial neural networks for porosity defect modelling, in Dahle, Arne (eds), Proceedings of the 1st International Light Metals Technology Conference 2003 : 18-20 September 2003, Brisbane, Australia, pp. 243-245, CRC for CAST Metals Manafacturing, Brisbane, Qld. [E1]
DRO entry for this publication

Khan, Imad M., Frayman, Yakov and Nahavandi, Saeid (2003) Modelling of porosity defects in high pressure die casting with a neural network, in Dhompongsa, Sompong (eds), InTech'03 : Proceedings of the Fourth International Conference on Intelligent Technologies 2003, pp. 1-6, Chiang Mai University, Institute for Science and Technology Research and Development, Chiang Mai, Thailand [E1]
DRO entry for this publication

Kong, Lingxue* and Hodgson, Peter (2003) Prediction of hot strength of steels with advanced models, in Zhang, L.C. and Lu, G. (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002), pp. 743-748, Trans Tech Publications, Uetikon-Zuerich, Switzerland ; Enfield, NH [E1]
DRO entry for this publication

Kong, L. X.* and Hodgson, P. D (2003) Constitutive modelling of drawing and extrusion with cyclic torsion, in Zhang, L.C. and Lu, G. (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002) : 2-6 December 2002, Sydney, Australia, pp. 101-106, Trans Tech Publications, Uetikon-Zuerich, Switzerland [E1]
DRO entry for this publication

Lan, Jinhui, Nahavandi, Saeid, Pan, Li and Zhou, Zhaoying* (2003) Development of low cost motion-sensing system, in Vadakkepat, Prahlad (eds), Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2001 : 28-30 November 2001, Singapore, Center for Intelligent Control, National University of Singapore, Singapore [E1]
DRO entry for this publication

Lan, Jinhui, Nahavandi, Saeid, Zhang, Jingxin*, Zheng, Hong and Lan, Tian* (2003) Research on seismic signals for vehicle targets and recognition by data fusion, in Unknown (ed.), Proceedings of The 4th International Conference on Control and Automation, pp. 733-736, IEEE Xplore, Piscataway, N.J. [E1]
DRO entry for this publication

Li, Yuncang, Zou, L. and Hu, Eric (2003) Photocatalytic degradation of dyes in wastewater using TiO2/UV in a flat-plate reactor, in Cadee, Keith (eds), Innovations in water : proceedings, pp. 1-10, Australian Water Association, Artarmon, N.S.W. [E1]
DRO entry for this publication

Li, Y., Zou, L. and Hu, E. (2003) Solar photocatalytic oxidation (PCO) process with a flat-plate reactor, in Saman, W. Y. and Charters, WWS (eds), Bringing solar down to earth : ISES 2001 Solar World Congress, Adelaide Australia, 25-30 November 2001 : proceedings, pp. 1855-1859, Australian and New Zealand Solar Energy Society, Adelaide, S.Aust. [E1]
DRO entry for this publication

Li, Yuncang, Hu, Eric and Zou, L. (2003) A solar collector with the absorber divided by rectangular slots, in Saman, W. Y. and Charters, WWS (eds), Bringing solar down to earth : ISES 2001 Solar World Congress, Adelaide Australia, 25-30 November 2001 : proceedings, pp. 461-465, Australian and New Zealand Solar Energy Society, Adelaide, S.Aust. [E1]
DRO entry for this publication

Long, John (2003) Surface analysis of aluminium by glow-discharge optical emission spectrometry, in Cashion, John; Finlayson, Trevor; Paganin, David; Smith, Andrew and Troup, Gordon (eds), Proceedings of the 27th Annual A&NZIP Condensed Matter and Materials Meeting, Australian Institute of Physics, Parkville, Vic. [E1]
DRO entry for this publication

Ma, X., Barnett, M. R. and Kim, Y. H.* (2003) Deformation behaviour of a cylinder under simultaneous compression and torsion, in Zhang, L.C. and Lu, G (eds), Engineering plasticity from macroscale to nanoscale : proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications (AEPA2002), pp. 767-772, Trans Tech Publications, Uetikon-Zuerich, Switzerland [E1]
DRO entry for this publication

Mackley, Joshua and Nahavandi, Saeid (2003) Analysis of extracted fingerprint texture features, in Vadakkepat, Prahlad (eds), Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2001 : 28-30 November 2001, Singapore, CIRAS Organising Committee, Singapore [E1]
DRO entry for this publication

Mane, Arvind, Nahavandi, Saeid and Gunn, Bruce (2003) Modeling a just-in-time plant using sequencing algorithms, in Unknown (ed.), Proceedings of the 4th International Conference on Control and Automation, pp. 713-717, IEEE Xplore, Piscataway, N.J. [E1]
DRO entry for this publication

Nahavandi, Saeid, Walsh, Simon and Gunn, Bruce (2003) Using information flow model to specify the Kanban-controlled shopfloor control system, in Brown, R. H. (eds), ICME 2003 : Conference proceedings of the 9th International Conference on Manufacturing Engineering, pp. 1-12, ICME, Melbourne, Vic. [E1]
DRO entry for this publication

Palmer, Stuart and Wang, Xungai (2003) Classification of fabric pilling by image analysis, in May, Rob and Blyth, W.F. (eds), EMAC 2003 proceedings : proceedings of the Sixth Engineering Mathematics and Applications Conference : University of Technology, Sydney, Australia, 9-11 July 2003, pp. 175-180, Engineering Mathematics Group, Sydney, N.S.W. [E1]
DRO entry for this publication

Palmer, Stuart and Tucker, Barry (2003) Information literacy for a sustainable career in engineering and technology, in Jollands, Margaret (eds), Engineering education for a sustainable future : proceedings of the 14th Annual Conference for Australasian Association for Engineering Education and 9th Australasian Women in Engineering Forum, 29th September - 1st October 2003, [held at] RMIT University, pp. 319-326, Australasian Association for Engineering Education, Melbourne, Vic. [E1]
DRO entry for this publication

Palmer, Stuart and Bray, Sharyn (2003) Academic performance and persistence of on- and off- campus engineering and technology students, in Jollands, Margaret (eds), Engineering education for a sustainable future : proceedings of the 14th Annual Conference for Australasian Association for Engineering Education and 9th Australasian Women in Engineering Forum, 29th September - 1st October 2003, [held at] RMIT University, pp. 246-253, Australasian Association for Engineering Education, Melbourne, Vic. [E1]
DRO entry for this publication

Pan, Li, Nahavandi, Saeid and Lan, Jinhui (2003) The reduction subset based on rough sets applied to texture classification, in Vadakkepat, Prahlad (eds), Program & abstracts : the Second International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2003 : 15-18 December 2003, Pan Pacific Hotel, Singapore, Center for Intelligent Control, National University of Singapore, Singapore [E1]
DRO entry for this publication

Pan, Li, Nahavandi, Saeid and Zheng, Hong (2003) The rough sets feature selection for trees recognition in color aerial images using genetic algorithms, in Vadakkepat, Prahlad (eds), Program & abstracts : the Second International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2003 : 15-18 December 2003, Pan Pacific Hotel, Singapore, Center for Intelligent Control, National University of Singapore, Singapore [E1]
DRO entry for this publication

Pan, Li*, Zheng, Hong and Nahavandi, Saeid (2003) The application of rough set and Kohonen network to feature selection for object extraction, in Wang, Xizhao and Yeung, Daniel (eds), 2003 International Conference on Machine Learning and Cybernetics,, pp. 1185-1189, IEEE Xplore, Piscataway, N.J. [E1]
DRO entry for this publication

Pathirana, Pubudu, Savkin, Andrey* and Nahavandi, Saeid (2003) Precision missile guidance for systems intercepting at small attack angles : a H‡ tracking approach, in Vadakkepat, Prahlad (eds), Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2003, CIRAS Organising Committee, Singapore [E1]
DRO entry for this publication

Pathirana, Pubudu, Savkin, Andrey* and Jha, Sanjay* (2003) Mobility modelling and trajectory prediction for cellular networks with mobile base stations, in Strivastava, Mani (eds), MobiHoc 2003 : proceedings of the Fourth ACM International Symposium on Mobile Ad Hoc Networking and Computing, pp. 213-221, ACM Press, New York, N.Y. [E1]
DRO entry for this publication

Pathirana, Pubudu N. and Savkin, Andrey V.* (2003) Sensor fusion based missile guidance, in Percival, John (eds), Proceedings of the Sixth International Conference on Information Fusion, pp. 253-260, Dept. of Electrical and Electronic Engineering, University of Melbourne, Melbourne, Vic. [E1]
DRO entry for this publication

Petrescu, D., Dingle, Matthew and Hodgson, Peter (2003) Prediction of ductile fracture in the cold forging of steel, in Brucato, Valerio (eds), Proceedings of the 6th ESAFORM Conference on Material Forming, pp. 919-922, Nuova Ipsa Editore, Palermo, Italy [E1]
DRO entry for this publication

Roberts, M., Hu, Eric and Nahavandi, Saeid (2003) A life cycle inventory of aluminium die casting, in Akiyoshi, Yuuko (eds), Proceedings of the Asia-Pacific Conference on Sustainable Energy and Environmental Technologies, pp. 256-260, Japan Macro-Engineers Society, Yokkaichi, Japan [E1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Webb, Geoff* and Hodgson, Peter (2003) Analysis of stamping production data with view towards quality management, in Brown, R. H (eds), ICME 2003 Conference proceedings, 13-15 Oct., 2003, Carlton Crest Hotel, Melbourne Australia., pp. 1-15, the Conference, Melbourne, Vic [E1]
DRO entry for this publication

Tang, Zheng Xue, Wang, Xungai and Fraser, B.* (2003) Energy consumption per unit yarn production in ring spinning, in May, Rob and Blyth, W.F. (eds), EMAC 2003 proceedings : proceedings of the Sixth Engineering Mathematics and Applications Conference : University of Technology, Sydney, Australia, 9-11 July 2003, pp. 289-293, Engineering Mathematics Group, Sydney, N.S.W. [E1]
DRO entry for this publication

Timokhina, I. B., Hodgson, P. D. and Pereloma, E. V.* (2003) Effect of the thermomechanical processing parameters on the microstructure-property relationships in C-Mn-Si TRIP steel, in Palmiere, Eric; Mahfouf, M. and Pinna, C. (eds), International Conference on Thermomechanical Processing: Mechanics, Microstructure & Control : 23-26 June 2002, the University of Sheffield, England : conference proceedings, pp. 115-121, Dept. of Engineering Materials, University of Sheffield, Sheffield, England [E1]
DRO entry for this publication

Tran, Huy K., Gunn, Bruce and Nahavandi, Saeid (2003) Acoustic condition monitoring for cold metal forming, in Brown, R. H. (eds), ICME 2003 : Conference proceedings of the 9th International Conference on Manufacturing Engineering, pp. 1-17, ICME, Melbourne, Vic. [E1]
DRO entry for this publication

Trinh, H., Fernando, T.* and Pathirana, Pubudu (2003) A reduced-order linear functional observer for linear stochastic systems, in Unknown (ed.), Proceedings of the IASTED International Conference on Applied Simulation and Modelling, pp. 290-294, ACTA Press, Anaheim, CA [E1]
DRO entry for this publication

Watson, B.M., Selvalingam, Selvadore and Ghafouri, M. (2003) Evaluation of SWAT for modelling the water balance of the Woady Yaloak River catchment, Victoria, in Post, David (eds), MODSIM 2003 : International Congress on Modelling and Simulation, Jupiters Hotel and Casino, 14-17 July 2003 : integrative modelling of biophysical, social and economic systems for resource management solutions : proceedings, pp. 1-6, Modelling and Simulation Society of Australia and New Zealand Inc., Canberra, A.C.T. [E1]
DRO entry for this publication

Wong, Alan (2003) Acoustic emission study on corona discharge using FDTD model, in Xingliang, Zhang; Jian, Li; Lijuan, Yang; Jianlin, Hu; Baochu, Yang and Hong, Li (eds), ICMEP 2003 : Proceedings of the 2nd International Conference on Insulation Condition Monitoring of Electrical Plant, pp. 68-71, Sichuan Publishing House of Science and Technology, Chengdu, China [E1]
DRO entry for this publication

Wong, K.L (2003) Study of acoustic emission (AE) caused by high voltage insulators, in Xingliang, Zhang; Jian, Li; Lijuan, Yang; Jianlin, Hu; Baochu, Yang and Hong, Li (eds), ICMEP 2003 : Proceedings of the 2nd International Conference on Insulation Condition Monitoring of Electrical Plant, pp. 272-274, Sichuan Publishing House of Science and Technology, Chengdu, China [E1]
DRO entry for this publication

Xiang, Y, Nahavandi, S., Trinh, H. and Zheng, H. (2003) A new second order method for blind signal separation from convolutive mixtures, in Vadakkepat, Prahlad; Wan, Tan Woei; Chen, Tan Kay and Poh, Loh Ai (eds), Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2001 : 28-30 November 2001, Singapore, Center for Intelligent Control, National University of Singapore, Singapore [E1]
DRO entry for this publication

You, Y.*, Hu, Eric, Jarvis, J.* and Li, Yuncang (2003) Simulation of the solar adsorption refrigeration operating at near atmospheric pressure, in Saman, W. Y. and Charters, W.W.S. (eds), Bringing solar down to earth : ISES 2001 solar world congress, Adelaide Australia, 25-30 November 2001, proceedings, pp. 1075-1083, Australian and New Zealand Solar Energy Society, Adelaide, S.Aust. [E1]
DRO entry for this publication

Yu, Wensheng*, Wang, Long* and Xiang, Yong (2003) Robust strictly positive real synthesis of polynomial segments for discrete time systems, in Abdallah, Chaouki (eds), Proceedings of the 42nd IEEE Conference on Decision and Control, pp. 622-627, IEEE Control Systems Society, Piscataway, N.J. [E1]
DRO entry for this publication

Zheng, H., Pan, L.*, Xiang, Yong, Wong, A. and Nahavandi, Saeid (2003) Genetic image enhancement based on saturation feedback, in Vadakkepat, Prahlad; Wan, Tan Woei; Chen, Tan Kay and Poh, Loh Ai (eds), Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2001 : 28-30 November 2001, Singapore, CIRAS Organising Committee, Singapore [E1]
DRO entry for this publication

Zheng, H., Nahavandi, Saeid, Pan, L.* and Xiang, Yong (2003) Genetic learning based texture surface inspection, in Vadakkepat, Prahlad; Wan, Tan Woei; Chen, Tan Kay and Poh, Loh Ai (eds), Proceedings of the International Conference on Computational Intelligence, Robotics and Autonomous Systems : CIRAS 2001 : 28-30 November 2001, Singapore, CIRAS Organising Committee, Singapore [E1]
DRO entry for this publication

Zheng, Hong, Wong, Alan and Nahavandi, Saeid (2003) Hybrid ant colony algorithm for texture classification, in Sarker, Ruhul (eds), 2003 Congress on Evolutionary Computation, CEC 2003 : proceedings : Canberra, Australia, 8-12 December, 2003., pp. 2648-2652, IEEE Xplore, Piscataway, N.J. [E1]
DRO entry for this publication

Zheng, Hong, Zheng, Zheng* and Xiang, Yiang (2003) The application of ant colony systems to image texture classification, in Wang, Xizhao and Yeung, Daniel (eds), Proceedings of the Second International Conference on Machine Learning and Cybernetics, Xi'an, 2-5 November 2003, pp. 1491-1495, IEEE, Piscataway, NJ [E1]
DRO entry for this publication

Zou, Linda, Bankowski, Piotr and Hodges, Ray* (2003) Using geopolymer to minimise metals leaching from brown coal fly ash, in Robinson, Brian (eds), ISWA 2003 : Proceedings of the International Solid Waste Association World Congress and Ozwaste Trade Exhibition : Sustainability in a New World, International Solid Waste Association, Vienna, Austria [E1]
DRO entry for this publication

Hua, Yingbo*, An, Senjian* and Xiang, Yong (2003) Identification of unknown uncorrelated colored signals distorted by unknown convolutive channels, in Unknown (ed.), ASAP 2003 : Proceedings of the Adaptive Sensor Array Processing 2003 Annual Workshop, pp. 1-6, Massachusetts Institute of Technology, Lexington, Massachusetts [E1.1]
DRO entry for this publication

Dingle, Matthew, Hodgson, Peter and Cardew-Hall, Michael* (2003) Optimisation of draw die structures to reduce bedding time during try-out, in Singh, U.P. (eds), Sheet metal 2003 : proceedings of the 10th International Conference, held at the University of Ulster, Jordanstown, United Kingdom, 14-16, April 2003, pp. 333-340 [E2]
DRO entry for this publication

D'Souza, Fabian, Cardew-Hall, Michael* and Dingle, Matthew (2003) Understanding variation in stamping using virtual tools, in Brucato, Valerio (eds), Proceedings of the 6th ESAFORM Conference on Material Forming : Salerno, April 28-30, 2003, pp. 751-754, Nuova Ipsa Editore, Palermo, Italy [E2]
DRO entry for this publication

Everaert, Bruno*, Corbett, Tim, Hurren, Christopher and Fox, Bronwyn (2003) An analysis of natural fiber composite processing conditions, in Liu, Aimin (eds), International development of kenaf and allied fibers : proceedings of the International Kenaf Symposium : August 19-21, 2003, Beijing, China, pp. 137-149, CCG International, St. Paul, Minn. [E2]
DRO entry for this publication

Frayman, Y. and Rolfe, B.F. (2003) Eccentricity and hardness control in cold rolling mills with a dynamically constructed neural controller, in Meech, John A.; Kawazoe, Yoshiyuki; Kumar, Vijay and Maguire, John F. (eds), IPMM 2003 : Intelligence in a small materials world : selected papers from the Fourth International Intelligent Processing and Manufacturing of Materials Conference, pp. 199-214, Intelligent Processing and Manufacturing of Materials, Sendai, Japan [E2]
DRO entry for this publication

Gao, W., Hodgson, P. and Kong, L.* (2003) Numerical simulation and mechanism of heat transfer in quenching fluidised beds, in Pan, Jiansheng and Totten, George E. (eds), Quenching and the Control of Distortion : Proceedings of the 4th International Conference on Quenching and the Control of Distortion, pp. 137-142, Chinese Heat Treatment Society, Beijing, China [E2]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Long, John and Hodgson, Peter (2003) Dynamic analysis of instantaneous heat transfer between immersed surface and fluidised beds based on FE Simulation, ICIAM 2003 : 5th international congress on industrial and applied mathematics, Australian Mathematical Society, Sydney, N.S.W. [E2]
DRO entry for this publication

King, Peter, Reynoldson, Ray*, Brownrigg, Allan and Long, John (2003) Fluidised bed CrN coating formation on pre-nitrocarburised plain carbon steel, Heat treating and surface engineering : proceedings of the 22nd Heat Treating Society Conference and the 2nd International Surface Engineering Congress : 15-17 September, 2003, Indianapolis, Indiana, USA, pp. 467-475, ASM International, Materials Park, OH [E2]
DRO entry for this publication

Mullins, Jonathan, Hodgson, Peter, Dingle, Matthew, Pidvysotskyy, Valery* and Gawad, Jerzy* (2003) Using Abaqus to predict the flow behaviour of metals, Proceedings of the Worley Australasian Finite Element Conference : the Mansion Hotel, Melbourne, Australia : 23-26 September 2003., Worley Limited, Melbourne, Vic. [E2]
DRO entry for this publication

Nahavandi, Saeid and Khoshnevisan, Mohammad* (2003) An evolutionary computing approach to minimize dynamic hedging error, in Masoud Nikravesh (ed.), Papers : BISC FLINT-CIBI International Joint Workshop on Soft Computing for Internet and Bioinformatics, University of California, Department of Electrical Engineering and Computer Sciences, Berkeley, Calif. [E2]
DRO entry for this publication

Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2003) Influence of grain size on the deformation behaviour of a TiIF Steel, in Takechi, H. (eds), IF steels 2003 : international forum for the properties and application of IF steels, pp. 329-336, Iron and Steel Institute of Japan, Tokyo, Japan [E2]
DRO entry for this publication

Qian, Ma*, St John, David*, Frost, Malcom* and Barnett, Matthew (2003) Grain refinement of pure magnesium using rolled Zirmax® master alloy (MG-33.3ZR), in Kaplan, Howard I. (eds), Magnesium technology 2003 : proceedings of the jointly sponsored by the Magnesium Committee of the Light Metals Division (LMD) and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (the Minerals, Metals & Materials, TMS, Warrendale, Pa. [E2]
DRO entry for this publication

St John, David*, Dahle, Arne*, Abbott, Trevor*, Nave, Mark and Qian, Ma* (2003) Solidification of cast magnesium alloys, in Kaplan, Howard I. (eds), Magnesium technology 2003 : proceedings of the jointly sponsored by the Magnesium Committee of the Light Metals Division (LMD) and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (the Minerals, Metals & Materials, pp. 95-100, TMS, Warrendale, Pa. [E2]
DRO entry for this publication

Timokhina, Ilana, Pereloma, Elena* and Hodgson, Peter (2003) TEM characterisation of thermomechanically processed C-Mn-Si TRIP steels with additions of Nb, Mo and Al, in Militzer, M.; Poole, W.J. and Essadiqi, E. (eds), Transformation and deformation mechanisms in advanced high-strength steels : proceedings, August 24-27, 2003, Vancouver, British Columbia, MetSoc, Montreal, Quebec [E2]
DRO entry for this publication

Wang, Huimin, Wang, Xungai and Postle, Ron* (2003) Changes in fiber fineness during hemp processing, in Liu, Aimin (eds), International development of kenaf and allied fibers : proceedings of the International Kenaf Symposium : August 19-21, 2003, Beijing, China, pp. 113-126, CCG International, St. Paul, Minn. [E2]
DRO entry for this publication

Wang, Huimin and Wang, Xungai (2003) The fineness variation of degummed hemp fibers, in Liu, Aimin (eds), International development of kenaf and allied fibers : proceedings of the International Kenaf Symposium : August 19-21, 2003, Beijing, China, pp. 127-136, CCG International, St. Paul, Minn. [E2]
DRO entry for this publication

Warrior, Alison, Eeles, Brenden*, Cardew-Hall, Michael* and Dingle, Matthew (2003) A structured approach to the evaluation of stamping feasibility during part design, Vehicle architectures. products, processes & future developments : 8th international conference, Florence ATA 2003, 14 - 15 - 16 May 2003, Palazzo degli Affari, Firenze, Italy ; ATA papers, Associazione Tecnica dell'Automobile, Firenze, Italy [E2]
DRO entry for this publication

Watson, Brett, Ghafouri, Mohammad and Selvalingam, Selvadore (2003) Application of SWAT to model the water balance of the Woady Yaloak River catchment, Australia, in Srinivasan, Raghavan; Jacobs, Jennifer and Jensen, Ric (eds), SWAT 2003: 2nd International SWAT Conference, pp. 94-110, USDA-ARS Research Lab, Temple, Tex. [E2]
DRO entry for this publication

Zou, L. and Atkinson, S. (2003) Emissions from light vehicles burning blended biodiesel and diesel fuel, CASANZ 2003 : Proceedings of the National Clean Air Conference : Linking Air Pollution Science, Policy and Management, Clean Air Society of Australia and New Zealand, Newcastle, N.S.W. [E2.1]
DRO entry for this publication

Khalife, Mohsen and McMurrich, Damian (2003) Investigation into the impacts of land use and industrial activity on the Moorabool River, Handbook & final program : the nature of variability in river systems, p. 105 [E3]
DRO entry for this publication

Long, John, Haynes, D.* and Hodgson, Peter (2003) Characterisation of galvanneal coatings on strip steel, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, pp. 1-6, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L2]
DRO entry for this publication

King, Peter, Long, John, Brownrigg, Allan and Reynoldson, Ray W.* (2003) Nitrocarburising of tool steels in a fluidised bed furnance, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, p. 1, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L3]
DRO entry for this publication

Long, John, Gao, Weimin and Hodgson, Peter (2003) Carbon depth-profiling in carburised steel, Adaptive materials for a modern society : International Conference and Exhibition Materials 2003, pp. 1-2, Institute of Materials Engineering Australasia, Sydney, N.S.W. [L3]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2003

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

2003 - Doctor of Philosophy

Lingli Chang. Supervisor: Xungai Wang
Thesis entitled: An Investigation of Yarn Hairiness.

Xin Liu. Supervisor: Xungai Wang
Thesis entitled: A Study of Australian Alpaca Fibres.

Xiang Ma. Supervisor: Matthew Barnett
Thesis entitled: Compression and Extrusion of Metals using Rotating Dies.

Robert Scott. Supervisor: Allan Brownrigg
Thesis entitled: The Influence of Processing on the Roll Forming Characteristics of Recovery Annealed Steel.

Ilana Timokhina. Supervisor: Peter Hodgson
Thesis entitled: Microstructure and Mechanical Properties of TRIP Steels.

2003 - Doctor of Technology

Wilbur Harvey. Supervisor: Peter Hodgson
Thesis entitled: Advanced Technology and Economies of Scale in the Cement Industry.

2003 - Master of Engineering

Con Baziotopoulos. Supervisor: Eric J. Hu
Thesis entitled: Utilising Solar Energy within Conventional Coal Fired Power Stations.

Adam De Ruyter. Supervisor: Peter Hodgson
Thesis entitled: Development of a Quality Cost Model for Automotive Stamping.

Arvind Mane. Supervisor: Saeid Nahavandi
Thesis entitled: Modelling and Optimising Operations of a Plant using JIT Philosophy.

Steven Mills. Supervisor: Allan Brownrigg
Thesis entitled: The Effect of Cold Drawing on Subsequent Surface Strain Path.

Avtar Singh. Supervisor: Xungai Wang
Thesis entitled: A Study of Dehairing of Cashmere Fibres.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Sunday 21st December 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010