2004 School of Engineering Research Output
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
Zou, L., Hu, Eric, Luo, Y. and Atkinson, S. (2004) Experimental study of the degradation of volatile organic compounds by photocatalytic oxidation using TiO2 pellets, in Brebbia. C.A. (ed.), Air pollution XII, pp. 773-780, WIT Press, Southampton, England [B1]
DRO entry for this publication
Backx, Petra*, Barnett, Matthew and Kestens, Leo* (2004) Texture changes during uniaxial compression of Mg-3AI-1Zn, Materials science forum, vol. 467-470, pp. 429-434, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Scopus - 1
Bankowski, P., Zou, Linda and Hodges, R.* (2004) Using inorganic polymer to reduce leach rates of metals from brown coal fly ash, Minerals engineering, vol. 17, no. 2, pp. 159-166, Pergamon, Oxford, England [C1]
ERA journal ID: 4052 – Scopus EID: 2-s2.0-0742303011
Citation counts:Thomson - 15
Bankowski, P., Zou, Linda and Hodges, R.* (2004) Reduction of metal leaching in brown coal fly ash using geopolymers, Journal of hazardous materials, vol. 114, no. 1, pp. 59-67, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 4682 – Scopus EID: 2-s2.0-7044269720
Citation counts:Barnett, Matthew, Atwell, Dale and Beer, Aiden (2004) Effect of grain size on the deformation and dynamic recrystallization of mg-3AI-1Zn, Materials science forum, vol. 467-470, pp. 435-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Barnett, Matthew, Nave, Mark and Bettles, C. J.* (2004) Deformation microstructures and textures of some cold rolled Mg alloys, Materials science and engineering A: structural materials : properties, microstuctures and processing, vol. 386, no. 1-2, pp. 205-211, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-5744227425
Citation counts:Barnett, Matthew, Ma, Xiang and Oudin, Alexis (2004) Generating misorientations in shear deformation structures, Materials transactions (JIM), vol. 45, no. 7, pp. 2151-2156, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-4544303268Barnett, Matthew, Beer, Aiden, Atwell, Dale and Oudin, Alexis (2004) Influence of grain size on hot working stresses and microstructures in Mg-3A1-1Zn, Scripta Materialia, vol. 51, no. 1, pp. 19-24, Pergamon, Tarrytown, NY [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-2342483153
Citation counts:Barnett, Matthew, Keshavarz, Zohreh, Beer, Aiden and Atwell, Dale (2004) Influence of grain size on the compressive deformation of wrought Mg-3A1-1Zn, Acta Materialia, vol. 52, no. 17, pp. 5093-5103, Elsevier Science, Tarrytown, NY ; Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-4644370586
Citation counts:Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained structure in plain carbon steels through thermomechanical processing, Materials transactions, vol. 45, no. 7, pp. 2214-2218, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-4544244971
Citation counts:Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) The evolution of ultrafine ferrite formation through dynamic strain-induced transformation, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 371, no. 1, pp. 343-352, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-16544369376
Citation counts:Beladi, Hossein, Kelly, Georgina, Shokouhi, A. and Hodgson, Peter (2004) Effect of thermomechanical parameters on the critical strain for ultrafine ferrite formation through hot torsion testing, Materials science & engineering. A., Structural materials : properties, microstructure and processing, vol. 367, pp. 152-161, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0942269403
Citation counts:Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2004) Microstructural evolution of ultrafine grained structure in plain carbon steels through single pass rolling, Materials science and technology, vol. 20, no. 12, pp. 1538-1544, Maney Publishing, Leeds, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Beladi, Hossein, Zarei-Hanzaki, A.*, Kelly, Georgina and Hodgson, Peter (2004) Formation of ultrafine grained microstructures in steel through strain induced transformation during single pass hot rolling, Materials science and technology, vol. 20, no. 2, pp. 213-220, The Institute, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Beltran, Rafael, Wang, Lijing and Wang, Xungai (2004) Predicting worsted spinning performance with an artificial neural network model, Textile research journal, vol. 74, no. 9, pp. 757-763, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-4744346433
Citation counts:Chen, Weiguo*, Zhao, Shichao* and Wang, Xungai (2004) Improving the color yield of ink-jet printing on cationized cotton, Textile research journal, vol. 74, no. 1, pp. 68-71, Sage, Portland, Or. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-1342310530
Citation counts:Davies, Chris* and Barnett, Matthew (2004) Expanding the extrusion limits of wrought magnesium alloys, JOM: the journal of the minerals, metals & materials society, vol. 56, no. 5, pp. 22-24, TMS - The Minerals, Metals and Materials Society, Warrendale, Pa. [C1]
ERA journal ID: 4030 – Scopus EID: 2-s2.0-3042529768Dehghan-Manshadi, A., Beladi, Hossein, Barnett, Matthew and Hodgson, Peter (2004) Recrystallization in 304 austenitic stainless steel, Materials science forum, vol. 467, no. 470, pp. 1163-1168, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Ebrahimi, R.*, Oudin, A., Najafi-Zadeh, A.*, Barnett, Matthew and Hodgson, Peter (2004) Static recrystallization of Ti-IF steel after warm deformation, Materials science forum, vol. 467, no. 470, pp. 251-256, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal listGao, Weimin, Long, John, Kong, Lingxue* and Hodgson, Peter (2004) Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed, ISIJ international, vol. 44, no. 5, pp. 869-877, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-3142747729
Citation counts:Ha, Q. P.* and Trinh, Hieu (2004) State and input simultaneous estimation for a class of nonlinear systems, Automatica, vol. 40, no. 10, pp. 1779-1785, Pergamon-Elsevier Science Ltd, Oxford, England [C1]
ERA journal ID: 4400 – Scopus EID: 2-s2.0-3843087258
Citation counts:Ha, Q. P.* and Trinh, Hieu (2004) Observer-based control of multi-agent systems under decentralized information structure, International journal of systems science, vol. 35, no. 12, pp. 719-728, Taylor and Francis Ltd, London, England [C1]
ERA journal ID: 17961 – Scopus EID: 2-s2.0-10644270979
Citation counts:Håkansson, Eva*, Kaynak, Akif, Lin, Tong, Nahavandi, Saeid, Jones, Trevor and Hu, Eric (2004) Characterization of conducting polymer coated synthetic fabrics for heat generation, Synthetic metals, vol. 144, no. 1, pp. 21-28, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-2342566951
Citation counts:Harris, S. G.*, Doyle, E. D.*, Wong, Y.-C.*, Munroe, P. R.*, Cairney, J. M.* and Long, John (2004) Reducing the macroparticle content of cathodic arc evaporated TiN coatings, Surface and coatings technology, vol. 183, no. 2-3, pp. 283-294, Elsevier Science BV, Amsterdam, Netherlands [C1]
ERA journal ID: 5020 – Scopus EID: 2-s2.0-2442509813
Citation counts:He, Wendy W. and Wang, Xungai (2004) Numerical modeling of the dynamic tensile behavior of irregular fibers, Journal of applied polymer science, vol. 91, no. 5, pp. 2855-2861, Wiley, Thousand Oaks, Calif. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-1142305297
Citation counts:He, Wendy W. and Wang, Xungai (2004) Modeling the tensile behavior of fiber bundles with irregular constituent fibers, Journal of applied polymer science, vol. 93, no. 6, pp. 2664-2668, Wiley, New York, NY. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-4344567397
Citation counts:Hodgson, Peter, Zahiri, S.H. and Whale, J.J. (2004) The static and metadynamic recrystallization behaviour of an X60 Nb Microalloyed Steel, ISIJ international, vol. 44, no. 7, pp. 1224-1229, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-4644312321
Citation counts:Hodgson, Peter and Beladi, Hossein (2004) The role of recrystallization and coarsening in the formation of ultrafine grained steels through thermomechanical processing., Materials science forum, vol. 467, no. 470, pp. 1137-1144, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Hodgson, Peter and Beladi, Hossein (2004) The formation of ultrafine grained steel microstructures through thermomechanical processing., Steel grips, vol. 2, no. Supplement, pp. 45-51, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not taggedHu, Eric, Zou, L. and Langston, Craig (2004) A new interlink decision making index for making multi-criteria decisions, Australasian journal of construction economics and building, vol. 4, no. 2, pp. 33-42, Australian Institute of Quantity Surveyors and the Australian Institute of Building, Sydney, N.S.W. [C1]
ERA journal ID: 4155 – Scopus EID: Not taggedKhoddam, S.* and Hodgson, Peter (2004) Conversion of the hot torsion test results into flow curve with multiple regimes of hardening, Journal of materials processing technology, vol. 153-154, pp. 839-845, Elsevier BV, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-9444236764
Citation counts:King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2004) Fluidized bed CrN coating formation on prenitrocarburized plain carbon steel, Journal of materials engineering and performance, vol. 13, no. 4, pp. 431-438, Springer, New York, N.Y. [C1]
ERA journal ID: 4794 – Scopus EID: 2-s2.0-4344584478
Citation counts:King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2004) Cr(N,C) diffusion coating formation on pre-nitrocarburised H13 tool steel, Surface and coatings technology, vol. 179, no. 1, pp. 18-26, Elsevier Science SA, Amsterdam, Netherlands [C1]
ERA journal ID: 5020 – Scopus EID: 2-s2.0-1342268770
Citation counts:Lan, Jinhui*, Lan, Tian* and Nahavandi, Saeid (2004) A novel application of a microaccelerometer for target classification, IEEE Sensors Journal, vol. 4, no. 4, pp. 519-524, IEEE Xplore, Piscataway, N.J. [C1]
ERA journal ID: 4437 – Scopus EID: 2-s2.0-3142749701
Citation counts:Lapovok, R.*, Barnett, Matthew and Davies, C. H. J.* (2004) Construction of extrusion limit diagram for AZ31 magnesium alloy by FE simulation, Journal of materials processing technology, vol. 146, no. 3, pp. 408-414, Elsevier SA, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-1242320977
Citation counts:Li, Yuncang, Zou, L. and Hu, Eric (2004) Photocatalytic degradation of dye effluent by titanium dioxide pillar pellets in aqueous solution, Journal of environmental sciences, vol. 16, no. 3, pp. 375-379, IOS Press, Amsterdam, The Netherlands [C1]
ERA journal ID: 124506 – Scopus EID: 2-s2.0-2442445002
Citation counts:Li, Zhijian, Wang, Lijing and Wang, Xungai (2004) Compressive and flexural properties of hemp fiber reinforced concrete, Fibers and polymers, vol. 5, no. 3, pp. 187-197, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-65449186171
Citation counts:Lin, Tong, Wang, Hongxia, Wang, Huimin and Wang, Xungai (2004) The charge effect of cationic surfactants on the elimination of fibre beads in the electrospinning of polystyrene, Nanotechnology, vol. 15, pp. 1375-1381, IOP Publishing, Bristol, England [C1]
ERA journal ID: 5163 – Scopus EID: 2-s2.0-4544352389
Citation counts:Liu, Xin, Hurren, Christopher J., Wang, Lijing and Wang, Xungai (2004) Effects of bleaching and dyeing on the quality of alpaca tops and yarns, Fibers and polymers, vol. 5, no. 2, pp. 128-133, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-24644481850
Citation counts:Liu, Xin, Wang, Lijing and Wang, Xungai (2004) Resistance to compression behavior of alpaca and wool, Textile research journal, vol. 74, no. 3, pp. 265-270, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-1842832133
Citation counts:Liu, Xin, Wang, Lijing and Wang, Xungai (2004) Evaluating the softness of animal fibers, Textile research journal, vol. 74, no. 6, pp. 535-538, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-3142600682
Citation counts:Long, John, Haynes, D.A. and Hodgson, Peter (2004) Characterisation of galvanneal coatings on strip steel, Materials forum, vol. 27, pp. 62-67, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal listMa, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Forward extrusion through steadily rotating conical dies. Part II: theoretical analysis, International journal of mechanical sciences, a cooperative research centre for cast, metals manufacturing, vol. 46, no. 3, pp. 465-489, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-2942668418
Citation counts:Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Forward extrusion through steadily rotating conical dies. Part I: experiments, International journal of mechanical sciences, vol. 46, no. 3, pp. 449-464, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-2942707864
Citation counts:Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Friction changes during compression tests using tool rotation technique, Key engineering materials, vol. 274, no. 276, pp. 895-900, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-33646252032Mullins, Jonathan G., Hodgson, Peter and Dingle, Matthew E. (2004) Using inverse analysis to obtain material behaviour for crash simulations, Steel grips, vol. 2, no. Supplement, pp. 535-540, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not taggedNanayakkara, N., Kelly, Georgina and Hodgson, Peter (2004) Determination of the coefficient of friction in partially penetrated draw beads, Steel grips, vol. 2, no. Supplement, pp. 677-680, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not taggedNave, Mark, Verbeken, Kim* and Kestens, Leo* (2004) On the production of randomly-oriented recrystallization nuclei for selective growth experiments, Materials science forum, vol. 467, no. 470, pp. 165-170, Trans Tech Publications, Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Nave, Mark and Barnett, Matthew (2004) Microstructures and textures of pure magnesium deformed in plane-strain compression, Scripta materialia, vol. 51, no. 9, pp. 881-885, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-4344568184
Citation counts:Nave, Mark, Barnett, Matthew and Beladi, Hossein (2004) The influence of solute carbon in cold-rolled steels on shear band formation and recrystallization texture, ISIJ international, vol. 44, no. 6, pp. 1072-1078, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-4344614533
Citation counts:Nave, Mark and Barnett, Matthew (2004) Fragmentation of orientation within grains of a cold-rolled interstitial-free steel, ISIJ international, vol. 44, no. 1, pp. 187-196, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-1842866351
Citation counts:Nave, Mark and Barnett, Matthew (2004) Texture change near grain boundaries and triple points in cold-rolled interstitial-free steel, Materials science and engineering A, vol. 386, pp. 244-253, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-6344221947
Citation counts:Nguyen, V.K. and White, L.B.* (2004) Joint space-time trellis decoding and channel estimation in correlated fading channels, IEEE Signal processing letters, vol. 11, no. 7, pp. 633-636, Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J. [C1]
ERA journal ID: 4438 – Scopus EID: 2-s2.0-3142734422
Citation counts:Oudin, Alexis, Barnett, Matthew and Hodgson, Peter (2004) Grain size effect on the warm deformation behaviour of a Ti-IF steel, Materials science & engineering A. Structural materials : properties, microstructure and processing, vol. 367, no. 1-2, pp. 282-294, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0942278159
Citation counts:Palmer, Stuart (2004) Evaluation of an on-line reflective journal in engineering education, Computer applications in engineering education, vol. 12, no. 4, pp. 209-214, John Wiley & Sons, Inc., Hoboken, N.J. [C1]
ERA journal ID: 41159 – Scopus EID: 2-s2.0-33750318279
Citation counts:Palmer, Stuart and Tucker, Barry (2004) Planning, delivery and evaluation of information literacy training for engineering and technology students, Australian academic & research libraries, vol. 35, no. 1, pp. 16-34, Australian Library and Information Association, Barton, A.C.T. [C1]
ERA journal ID: 10637 – Scopus EID: Not taggedPalmer, Stuart and Wang, Xungai (2004) Evaluating the robustness of objective pilling classification with the two-dimensional discrete wavelet transform, Textile research journal, vol. 74, no. 2, pp. 140-145, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-1542715801
Citation counts:Palmer, Stuart (2004) Authenticity in assessment : reflecting undergraduate study and professional practice, European journal of engineering education, vol. 29, no. 2, pp. 193-202, Taylor & Francis Ltd, Abingdon, England [C1]
ERA journal ID: 20622 – Scopus EID: Not taggedPathirana, Pubudu, Savkin, Andrey* and Jha, Sanjay* (2004) Location estimation and trajectory prediction for cellular networks with mobile base stations, IEEE transactions on vehicular technology, vol. 53, no. 6, pp. 1903-1913, Institute of Electrical and Electronics Engineers, New York, N.Y. [C1]
ERA journal ID: 5074 – Scopus EID: 2-s2.0-10244279146
Citation counts:Pathirana, Pubudu, Savkin, Andrey* and Jha, Sanjay* (2004) Robust extended Kalman filter based technique for location management in PCS networks, Computer communications, vol. 27, no. 5, pp. 502-512, Elsevier Science Pub., New York, NY [C1]
ERA journal ID: 5063 – Scopus EID: 2-s2.0-1342328019
Citation counts:Refaat, Sameh and Nahavandi, Saeid (2004) Control loop for finding initial translator position of linear synchronous motor, International journal of robotics and automation, vol. 19, no. 2, pp. 1-5, ACTA Press, Anaheim, Calif. [C1]
ERA journal ID: 125289 – Scopus EID: 2-s2.0-2142765950Tang, Zheng-Xue, Wang, Xungai and Fraser, Barrie* (2004) Distribution of power requirements during yarn winding in ring spinning, Textile research journal, vol. 74, no. 8, pp. 735-741, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-4344710451
Citation counts:Tang, Zheng-Xue, Wang, Xungai and Fraser, Barrie* (2004) Minimizing energy consumption of yarn winding in ring spinning, Textile research journal, vol. 74, no. 12, pp. 1097-1103, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-11144278780
Citation counts:Tang, Zheng-Xue, Wang, Xungai, Fraser, Barrie* and Wang, Lijing (2004) An experimental investigation of yarn tension in simulated ring spinning, Fibers and polymers, vol. 5, no. 4, pp. 275-279, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-24644491208
Citation counts:Tang, Zheng-Xue, Wang, Xungai and Fraser, Barrie* (2004) Skin friction coefficient on a yarn package surface in ring spinning, Textile research journal, vol. 74, no. 10, pp. 845-850, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-6944238443
Citation counts:Timokhina, Ilana, Hodgson, Peter and Pereloma, E.V.* (2004) Effect of microstructure on the stability of retained austenite in transformation-induced-plasticity steels, Metallurgical and materials transactions. A, Physical metallurgy and materials science, vol. 35A, no. 8, pp. 2331-2341, ASM International, Warrendale, Pa. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-4644301946
Citation counts:Treloar, Graham J., McCormack, Michael, Palmowski, Laurence and Fay, Roger* (2004) Embodied water of construction, BEDP environment design guide, vol. GEN 58, pp. 1-8, Royal Australian Institute of Architects, Melbourne, Vic. [C1]
ERA journal ID: 41558 – Scopus EID: Not taggedTrinh, Hieu, Aldeen, M.* and Nahavandi, Saeid (2004) An observer design procedure for a class of nonlinear time-delay systems, Computers & electrical engineering, vol. 30, no. 1, pp. 61-71, Elsevier Ltd, London, England [C1]
ERA journal ID: 4403 – Scopus EID: 2-s2.0-0141882865
Citation counts:Trinh, Hieu, Fernando, T.* and Nahavandi, Saeid (2004) Design of reduced-order functional observers for linear systems with unknown inputs, Asian journal of control, vol. 6, no. 4, pp. 514-520, Wiley Interscience, Malden, Mass. [C1]
ERA journal ID: 3586 – Scopus EID: 2-s2.0-12844262937
Citation counts:Verbeken, Kim*, Kestens, Leo* and Nave, Mark (2004) Evaluation of selective growth in a Fe-2.8% Si single crystal using Rodrigues-Frank space, Materials science forum, vol. 467, no. 470, pp. 203-208, Trans Tech Publications, Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Walsh, A.P., Baliga, B.* and Hodgson, Peter (2004) Force modelling of the crankshaft pin grinding process., Proceedings of the Institution of Mechanical Engineers, Part D: journal of automobile engineering, vol. 218, no. 3, pp. 219-228, Professional Engineering Publishing, London, England [C1]
ERA journal ID: 3648 – Scopus EID: 2-s2.0-8644266772
Citation counts:Wang, H and Wang, Xungai (2004) Evaluation of the fineness of degummed bast fibers, Fibers and polymers, vol. 5, no. 3, pp. 171-176, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-21644453329
Citation counts:Weiss, Matthias, Rolfe, Bernard F., Dingle, Matthew E. and Hodgson, Peter (2004) The influence of interlayer thickness and properties on spring-back of SPS- (steel/polymer/steel) laminates., Steel grips, vol. 2, no. Supplement, pp. 445-449, GRIPS Media GmbH, Germany [C1]
ERA journal ID: 5018 – Scopus EID: Not taggedWen, Cui'e, Yamada, Y.*, Shimojima, K.*, Chino, Y.*, Hosokawa, H.* and Mabuchi, M.* (2004) Compressibility of porous magnesium foam: dependency on porosity and pore size, Materials letters, vol. 58, no. 3-4, pp. 357-360, Elsevier Science BV, Amsterdam, Netherlands [C1]
ERA journal ID: 1005 – Scopus EID: 2-s2.0-0242522453
Citation counts:Wen, Cui'e, Yamada, Yasuo*, Asahina, Tadashi*, Kato, Kiyotaka*, Sonoda, Tutomu*, Watazu, Akira* and Mabuchi, Mamoru* (2004) Effects of the density on compressive properties in cellular aluminum produced by the sintering method, Materials transactions, vol. 45, no. 2, pp. 327-329, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-1942508932
Citation counts:Wong, Khoi Loon (2004) Application of very-high-frequency (VHF) method to ceramic insulators, IEEE transactions on dielectrics and electrical insulation, vol. 11, no. 6, pp. 1057-1064, Institute of Electrical Electonics Engineers, Piscataway, N. J. [C1]
ERA journal ID: 4449 – Scopus EID: 2-s2.0-12344325576
Citation counts:Xiang, Yong, Yu, Wensheng*, Zhang, Jingxin* and An, Senjian* (2004) Blind source separation based on phase and frequency redundancy of cyclostationary signals, IEICE transactions on fundamentals of electronics, communications and computer sciences, vol. E87-A, no. 12, pp. 3343-3349, Institute of Electronics, Information and Communication Engineers, Tokyo, Japan [C1]
ERA journal ID: 17890 – Scopus EID: 2-s2.0-11144279914
Citation counts:Xiang, Yong, Nahavandi, Saeid, Trinh, Hieu and Zheng, H.* (2004) A new second-order method for blind signal separation from dynamic mixtures, Computers & electrical engineering, vol. 30, no. 5, pp. 347-359, Elsevier Ltd., London, England [C1]
ERA journal ID: 4403 – Scopus EID: 2-s2.0-5144233403
Citation counts:Nan-Feng, Xiao* and Nahavandi, Saeid (2004) Visual feedback control of a robot in an unknown environment (learning control using neural networks), International journal of advanced manufacturing technology, vol. 24, no. 7-8, pp. 509-516, Springer London, London, England [C1]
ERA journal ID: 3603 – Scopus EID: Not taggedXu, Jianying, Shen, Wei*, Paimin, Rohani* and Wang, Xungai (2004) Improved membranes for the extraction of heavy metals, Fibers and polymers, vol. 5, no. 1, pp. 68-74, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-9144235741
Citation counts:Zahiri, Saden H., Byon, Sang Bin*, Kim, Sung-II*, Lee, Youngseog* and Hodgson, Peter (2004) Static and metadynamic recrystallization of interstitial free steels during hot deformation, ISIJ international, vol. 44, no. 11, pp. 1918-1923, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-11144225445
Citation counts:Zahiri, S. H. and Hodgson, Peter (2004) The static, dynamic and metadynamic recrystallisation of a medium carbon steel, Materials science and technology, vol. 20, no. 4, pp. 458-464, The Institute, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Zheng, Hong*, Zhang, Jingxin* and Nahavandi, Saeid (2004) Learning to detect texture objects by artificial immune approaches, Future generation computer systems, vol. 20, no. 7, pp. 1197-1208, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 17858 – Scopus EID: 2-s2.0-4444290554
Citation counts:Zhu, B., Mardel, J.* and Kelly, Georgina (2004) An investigation of tribological properties of CN and TiCN coatings, Journal of materials engineering and performance, vol. 13, no. 4, pp. 481-487, Springer, Berlin, Gemany [C1]
ERA journal ID: 4794 – Scopus EID: 2-s2.0-4344577292Zhu, B. and Kelly, Georgina (2004) Frictional behaviour and wear performance of a nitrocarburised coating sliding against AISI 1019 steel, Materials forum, vol. 27, pp. 54-61, Institute of Materials Engineering Australasia Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal listZou, L., Hu, Eric, Luo, Y. and Atkinson, S. (2004) Degradation of VOCs by phototcatalytic oxidation reactor using TiO2 pellets, Research journal of chemistry and environment, vol. 8, no. 1, pp. 16-19, Chemenviron, Indore, India [C1]
ERA journal ID: 41999 – Scopus EID: Not taggedChino, Y.*, Mabuchi, M.*, Shimojima, K.*, Hosokawa, H.*, Yamada, Y.*, Wen, C.E. and Iwasaki, H.* (2004) Solid state recycling of 5083 Al alloy by hot extrusion, Transaction of the materials research society of japan, vol. 29, no. 5, pp. 1893-1896, Materials Research Society of Japan, Tokyo, Japan [C1.1]
ERA journal ID: 41403 – Scopus EID: Not taggedMabuchi, M.*, Chino, Y.*, Shimojima, K.*, Hosokawa, H.*, Yamada, Y.*, Wen, C.E. and Iwasaki, H.* (2004) Superplasticity for solid-recycled AZ31 magnesium alloy, Transaction of the Materials Research Society of Japan, vol. 29, no. 5, pp. 2097-2100, Materials Research Society of Japan, Tokyo, Japan [C1.1]
ERA journal ID: 41403 – Scopus EID: Not taggedFabijanic, Dan, Kelly, Georgina and Hodgson, Peter (2004) Development of a duplex surface treatment using fluidised bed technololgy, Materials Australia, vol. 37, no. 1, pp. 12-15, Institute of Metals and Materials Australasia Ltd, Parkville, Vic. [C3]
ERA journal ID: Not matching ERA journal listPalmowski, Laurence (2004) Making energy from grape marc using anaerobic digestion, Australian and New Zealand grapegrower and winemaker, vol. 491, pp. 50-52, Ryan Publications Pty Ltd, Beulah Park, S. Aust. [C3]
ERA journal ID: Not matching ERA journal listBhatti, Asim, Nahavandi, Saeid and Frayman, Yakov (2004) A multi-wavelet based technique for calculating dense 2D disparity maps from stereo, in Jamshidi, Mo; Ollero, Anibal; Foulloy, Laurent; Reuter, Mattheius; Kamrani, Ali and Hata, Yutaka (eds), Robotics : trends, principles, and applications : proceedings of the Sixth Biannual World Automation Congress (WAC), ISORA, Seville, Spain, pp. 1-6, TSI Press, Albuquerque, NM [E1]
Cave, Alex and Nahavandi, Saeid (2004) Kanban devs modelling, simulation and verification, in Kozan, Erhan (eds), APIEMS 2004 : Proceedings of abstracts and papers (on CD-ROM) of the 5th Asia-Pacific Industrial Engineering and Management Systems Conference & the 7th Asia-Pacific division meeting of the International Foundation of Production Research : Gold Coast, Aus, pp. 22.6.1-22.6.9, Queensland University of Technology, Brisbane, Qld. [E1]
Ferguson, Clive and Lloyd, B. E. (2004) A Euro-American-Australian study of the mechanical engineering profession as a foundation for the study of mechanical engineering attributes, in Halstead, Alison and Lister, Paul (eds), International conference on innovation, good practice and research in engineering education : June 7-9, 2004, Wolverhampton, England, pp. 147-152, University of Wolverhampton, Wolverhampton, England [E1]
Fielding, Michael and Nahavandi, Saeid (2004) Highly programmable surface, in Erden, Abdulkadir; Platin, Bulent E. and Acar, Memis (eds), Mechatronics 2004 : 9th Mechatronics Forum International Conference, Ankara, 30 Aug-1 Sept 2004 : conference proceedings, pp. 577-582, Atilim University, Ankara, Turkey [E1]
Fielding, Michael and Nahavandi, Saeid (2004) Haptics mouse for visually impaired, in Drews, Paul (eds), Mechatronics & robotics, pp. 356-361, Eysoldt Verlag, Aachen, Germany [E1]
Frayman, Yakov, Zheng, Hong and Nahavandi, Saeid (2004) Machine vision system for automatic inspection of surface defects in aluminium die casting, in Alo, Richard (eds), InTech'04 : Proceedings of the 5th International Conference on Intelligent Technologies, pp. 1-5, University of Houston-Downtown, Houston, Tex. [E1]
Gao, Weimin, Kong, Lingxue*, Hodgson, Peter and Wang, B.* (2004) Numerical study of conduction and convection between immersed object and gas fluidized bed, in Cooper, J. (eds), Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis--2004 : presented at 7th Biennial Conference on Engineering Systems Design and Analysis, pp. 1-7, American Society of Mechanical Engineers, New York, N.Y [E1]
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Computational simulation of heat transfer from alternate heating sources, in Topping, B. H. V. and Mota Soares, C. A. (eds), Proceedings of the 4th International Conference on Engineering Computational Technology, pp. 1-9, Civil-Comp, Kippen, Scotland [E1]
Ghamami, Khayam and Hu, Eric (2004) Application of neural networks as an auxiliary technique in the modelling of power station, in Walker, Geoffrey (eds), AUPEC 2004 : Australasian Universities Power Engineering Conference Brisbane, Australia, pp. 1-6, University of Queensland, School of Information Technology & Electrical Engineering, Brisbane, Qld [E1]
Ha, Q. P.*, Trinh, Hieu and Dissanayake, G.* (2004) A low-order linear functional observer for time delay systems, in Cantoni, Michael (eds), ASCC 2004 : Proceedings of the 5th Asian Control Conference, pp. 947-955, ASCC, Melbourne, Vic. [E1]
Ha, Quang*, Nguyen, Anh* and Trinh, Hieu (2004) Simultaneous state and input estimation with application to a two-link robotic system, in Cantoni, Michael (eds), ASCC 2004 : Proceedings of the 5th Asian Control Conference, pp. 322-328, ASCC, Melbourne, Vic. [E1]
Ha, Quang*, Tran, Hung* and Trinh, Hieu (2004) Observer-based output feedback variable structure control with application to a two-link manipulator, in Ha, Quang (eds), Preprints of the 3rd IFAC Symposium on Mechatronic Systems, pp. 133-138, Causal Productions, Adelaide, S. Aust. [E1]
Hu, Eric, Li, Yuncang and Zou, L. (2004) Solar powered colour removal of dyes using ferrioxalate/H2O2, in Lyon, Katrina (eds), Solar 2004, 30 November - 3 December 2004 : life, the universe & renewables, pp. 1-9, Australian and New Zealand Solar Energy Society, Perth, W.A. [E1]
Huang, Wei*, Hu, Eric and Ghamami, Khayam (2004) Using immune genetic algorithm to optimize the reactive power, in Saha, Tapan (eds), AUPEC 2004 : Australasian Universities Power Engineering Conference Brisbane, Australia, pp. 1-8, University of Queensland, School of Information Technology & Electrical Engineering, Brisbane, Qld [E1]
Jeyaseelan, Sithamparappillai (2004) Runoff absorption potential of roofing materials, in Bates, David (eds), Enviro 04 (2004 : Sydney, Australia), pp. 1-4, Enviroaust Convention Limited, Sydney, N. S. W. [E1]
Jeyaseelan, Sithamparappillai (2004) Study of conversion processes in development of activated carbon, in Bates, David (eds), Enviro 04 (2004 : Sydney, Australia), pp. 1-4, Enviroaust Convention Limited, Sydeney, N.S.W. [E1]
Kaynak, Akif, Håkansson, Eva* and Nahavandi, Saeid (2004) Conductive fabrics for heating applications, in Erden, Abdulkadir; Platin, Bulent E. and Acar, Memis (eds), Mechatronics 2004 : 9th Mechatronics Forum International Conference, Ankara, 30 Aug-1 Sept 2004 : conference proceedings, pp. 111-121, Atilim University, Ankara, Turkey [E1]
Khalife, M. (2004) Polishing domestic wastewater using textile media : a practical application, in Bates, David (eds), Enviro 04 Convention & Exhibition. Proceedings, Enviroaust Convention Limited, Sydney, N.S.W. [E1]
Khalife, M. and Kingsbury, B. (2004) The Werribee River : health and compliance, in Bates, David (eds), Enviro 04 Convention & Exhibition. Proceedings, Enviroaust Convention Limited, Sydney, N.S.W. [E1]
Khan, I., Frayman, Yakov and Nahavandi, Saeid (2004) Knowledge extraction from a mixed transfer function artificial neural network, in Alo, Richard (eds), InTech'04 : Proceedings of the 5th International Conference on Intelligent Technologies, pp. 1-6, University of Houston-Downtown, Houston, Tx [E1]
Long, John M. and Baskaran, Kanagaratnam (2004) Engineering education down under : distance teaching at Deakin University, Australia, in Abata, Duane (eds), Proceedings of the 2004 American Society for Engineering Education Annual Coriference & Exposition, pp. 1-12, American Society for Engineering Education, Washington, D.C. [E1]
Long, John M., Florance, J. R. and Joordens, Matthew (2004) The use of home experimentation kits for distance students in first-year undergraduate electronics, in Abata, Duane (eds), Proceedings of the 2004 American Society for Engineering Education Annual Conference & Exposition, American Society for Engineering Education, Washington, D.C. [E1]
Ma, Xiang, Barnett, Matthew and Kim, Y. H.* (2004) Stress analysis of compression of aluminium with rotating tools, in Nie, J. F.; Morton, A. J. and Muddle, B. C. (eds), Aluminium alloys : their physical and mechanical properties : proceedings of the 9th International Conference on aluminium alloys (ICAA9), pp. 1123-1127, IMEA, North Melbourne, Vic. [E1]
Mackley, J. and Nahavandi, Saeid (2004) Active temperature compensation for an accelerometer based angle measuring device, in Jamshidi, Mo; Ollero, Anibal; Foulloy, Laurent; Reuter, Mattheius; Kamrani, Ali and Hata, Yutaka (eds), Robotics : trends, principles, and applications : proceedings of the Sixth Biannual World Automation Congress (WAC), ISORA, Seville, Spain, pp. 1-6, TSI Press, Albuquerque, N.M. [E1]
Mason, P., Wong, A.* and Nahavandi, Saeid (2004) Automotive can network response time analysis with variable jitter, in Erden, Abdulkadir; Platin, Bulent E. and Acar, Memis (eds), Mechatronics 2004 : 9th Mechatronics Forum International Conference, Ankara, 30 Aug-1 Sept 2004 : conference proceedings, pp. 785-794, Atilim University, Ankara, Turkey [E1]
Mullins, James, Trinh, Hieu and Nahavandi, Saeid (2004) A real time haptic model generation technique for surgical needle insertion simulation, in Drews, Paul (eds), Proceedings of the 2004 Mechatronics & Robotics Conference, pp. 350-354, Eysoldt Verlag, Aachen, Germany [E1]
Mullins, James, Trinh, Hieu and Nahavandi, Saeid (2004) Soft tissue modelling for haptic rendering in virtual environments, in Erden, Abdulkadir; Platin, Bulent E. and Acar, Memis (eds), Mechatronics 2004 : 9th , Ankara, 30 Aug-1 Sept 2004 : conference proceedings, pp. 693-698, Atilim University, Ankara, Turkey [E1]
Nguyen, A. D.*, Ha, Q. P.*, Huang, S.* and Trinh, Hieu (2004) Observer-based decentralized approach to robotic formation control, in Barnes, Nick and Austin, David (eds), Proceedings of the 2004 Australasian Conference on Robotics & Automation, pp. 1-8, Australian Robotics & Automation Association, Canberra, A.C.T. [E1]
Nicholson, D., Gunn, Bruce and Nahavandi, Saeid (2004) Simulation-based support tool for operator performance in batch manufacturing, in Kozan, Erhan (eds), Proceedings of abstracts and papers of the 5th Asia-Pacific Industrial Engineering and Management Systems Conference & the 7th Asia-Pacific division meeting of the International Foundation of Production Research : Gold Coast, Australia, 12-15 December 200, pp. 1-11, Queensland University of Technology, Brisbane, Qld. [E1]
Oakley, V., Walsh, S. and Nahavandi, Saeid (2004) Application of co-operative agents in handling fluctuations in a pull production system, in Jamshidi, Mo; Ollero, Anibal; Foulloy, Laurent; Reuter, Mattheius; Kamrani, Ali and Hata, Yutaka (eds), Intelligent automation and control : trends, principles and applications : proceedings of the Sixth World Automation Congress (WAC) ISIAC 2004, ISOMA 2004, Seville, Spain, pp. 1-6, TSI Press, Albuquerque, N.M [E1]
Palmer, Stuart and Bray, Sharyn (2004) Comparative academic performance of lifelong learners in engineering and technology, in Danaher, Patrick Alan; Macpherson, Colin; Nouwens, Fons and Orr, Debbie (eds), Lifelong learning : whose responsibility and what is your contribution? : refereed papers from the 3rd International Lifelong Learning Conference, Yeppoon, Central Queensland, Australia, 13 - 16 June 2004, pp. 281-288, Central Queensland University Press, Rockhampton, Qld. [E1]
Palmer, Stuart (2004) On-line support for students studying engineering management off-campus in summer semester, in Snook, Chris and Thorpe, David (eds), Creating flexible learning environments: proceedings of the 15th Australasian Conference for the Australasian Association for Engineering Education and the 10th Australasian Women in Engineering Forum, pp. 310-317, Australasian Association for Engineering Education, Toowoomba, Qld. [E1]
Palmer, Stuart and Bray, Sharyn (2004) Why do Deakin students elect to study engineering?, in Snook, Chris and Thorpe, David (eds), Creating Flexible Learning Environments: Proceedings of the 15th Australasian Conference for the Australasian Association for Engineering Education and the 10th Australasian Women in Engineering Forum, pp. 479-486, Australasian Association for Engineering Education, Toowoomba, Qld. [E1]
Pathirana, Pubudu, Savkin, Andrey* and Jha, Sanjay* (2004) Robust extended kalman filter applied to location tracking and trajectory prediction for PCS networks, in Li-Chen Fu (ed.), Proceedings of 2004 IEEE Conference on Control Applications : September 2-4, 2004, the Grand Hotel, Taipei, Taiwan, pp. 63-68, IEEE, Piscataway, N.J. [E1]
Pathirana, Pubudu, Duncan, S* and Jones, P.* (2004) Robust control applied to metal spraying for rapid tooling, in Cantoni, Michael (eds), Proceedings of the 5th Asian Control Conference : Melbourne, 20-23 July, 2004., pp. 308-315, ASCC, Melbourne, Australia [E1]
Price, Darren J., Walsh, Simon P. and Nahavandi, Saeid (2004) Unifying manufacturing simulation models using HLA, in Schoop, Ronald; Colombo, Armando; Bernhardt, Rolf and Schreck, Gerhard (eds), 2004 2nd IEEE International Conference on Industrial Informatics : Collaborative automation--one key for intelligent industrial environments : 24th-26th June, 2004, Berlin, Germany, pp. 190-195, IEEE Industrial Electronics Society, Berlin, Germany [E1]
Uddin, Mohammad Jashim, Refaat, Sameh, Nahavandi, Saeid and Trinh, Hieu (2004) Kinematic and dynamic modeling of a robotic head with linear motors, in Salem, Sam (eds), Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success., pp. 879-884, PCMM, Box Hill, Vic. [E1]
Uddin, Mohammad J., Nasu, Yasuo*, Takeda, Kenro*, Nahavandi, Saeid and Capi, Genci* (2004) An autonomous trimming system of large glass fiber reinforced plastics parts using an omni-directional mobile robot and its control, in Salem, Sam (eds), Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success., pp. 866-872, PCMM, Box Hill, Vic. [E1]
Walsh, Simon P. and Nahavandi, Saeid (2004) Applying a reconfigurable multi-agent scheduler to product distribution, in Yager, Ronald and Sgurev, Vassil (eds), 2004 Second International IEEE Conference "Intelligent Systems" : proceedings : June 22-24, 2004, Varna, Bulgaria, pp. 411-416, IEEE Xplore, Piscataway, N.J. [E1]
Wang, H., Lin, Tong, Bai, F.* and Kaynak, Akif (2004) Fluorescence quenching behaviour of hyperbranched polymer to the nitro-compounds, in Guceri, Selcuk; Gogotsi, Yury G. and Kuznetsov, Vladimir (eds), Nanoengineered nanofibrous materials, pp. 459-468, Kluwer Academic Publishers, Dordrecht, The Netherlands [E1]
Wong, K. L.*, Xiang, Yong and Nahavandi, Saeid (2004) Emission-based condition monitoring technique for ZnO surge arrester, in Domijan. Jr, A. (eds), Seventh IASTED International Conference on Power and Energy Systems : special theme: distributed energy and demand response ; November 28 - December 1, 2004, Clearwater Beach, FL, USA ; [proceedings], pp. 234-237, Acta Press, Anaheim, Calif. [E1]
Xiang, Yong, Yu, Wensheng* and Zhang, Jingxin* (2004) Blind separation of cyclostationary sources based on phase-frequency redundancy, in Yuan, Baozong; Ruan, Qiuqi and Tang, Xiaofang (eds), 2004 7th International Conference on Signal Processing : proceedings : ICSP'04 : Aug. 31-Sept 4, 2004, Beijing, China, pp. 403-406, IEEE Xplore, Piscataway, N.J. [E1]
Xiang, Yong, Yu, Wensheng*, Zheng, Hong* and Nahavandi, Saeid (2004) Blind separation of cyclostationary signals from instantaneous mixtures, in Chu, Jian (eds), WCICA 2004 : Fifth World Congress on Intelligent Control and Automation, June 15-19, 2004, Hangzhou, China : conference proceedings, pp. 309-312, IEEE Xplore, Piscataway, N.J. [E1]
Yamada, Yasuo*, Wen, Cui'e, Asahina, T* and Mabuchi, M.* (2004) Processing and mechanical properties of hollow sphere aluminum foams, in Khor, K.A.; Ramanujan, R.V.; Ooi, C.P. and Zhao, J. (eds), 3rd International Conference on Materials Processing for Properties and Performance (MP³)- III, pp. 569-575, Institute of Materials (East Asia), Singapore [E1]
Gao, W. M., Kong, L. X.* and Hodgson, P. D. (2004) Computational simulation of heat transfer from alternate heating sources, in Topping, B. H. V. and Mota Soares, C. A. (eds), Progress in engineering computational technology : Proceedings of the 4th International Conference on Engineering Computational Technology, Saxe-Coburg, Stirling, Portugal [E1.1]
Kong, L. X.*, Gao, W. M. and Hodgson, P. D. (2004) Computational simulation of gas flow and heat transfer near immersed object in fluidised bed, in Topping, B. H. V. and Mota Soares, C. A. (eds), Progress in engineering computational technology : Proceedings of the 4th International Conference on Engineering Computational Technology, pp. 1-13, Saxe-Coburg, Stirling, Portugal [E1.1]
Kong, Lingxue*, Gao, Weimin, Evans A. M.* and Wang, B.* (2004) Influence of geometrical design and flow conditions on the performance of a microatomiser, in Cooper, J. (eds), Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis--2004 : presented at 7th Biennial Conference on Engineering Systems Design and Analysis, American Society of Mechanical Engineers, New York, N. Y. [E1.1]
Asgari, Alireza, Pereira, Michael, Clark, Ben, Dingle, Matthew and Hodgson, Peter (2004) Sheet forming simulation for AHSS components in the automotive industry, in Ghosh, S.; Castro, J.C. and Lee, J.K. (eds), Materials processing and design : modeling, simulation and applications : NUMIFORM 2004, pp. 977-982, American Institute of Physics, Melville, N.Y. [E2]
Brady, Rex and Wang, Xungai (2004) Size distribution of cortical cells in animal fibres, in Xuwei, Chen; Yi, Ge and Xiaoyin, Yan (eds), Quality textiles for quality life : proceedings of the Textile Institute 83rd World Conference (83rd TIWC), May 23-27, Shanghai, China, pp. 3-6, Textile Institute, Manchester, England [E2]
Dang, X.*, Mulyawan, B.*, Bulusu, N.*, Jha, S.* and Pathirana, P. (2004) The REKF localization system : node localization using mobile robots, SenSys '04 : proceedings of the Second International Conference on Embedded Networked Sensor Systems : November 3-5, 2004, Baltimore, Maryland, p. 321, ACM Press, New York, N.Y. [E2]
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Numerical study of gas flow and heat transfer in ceramic-sphere regenerators to perform high temperature air combustion, in Salem, Sam (eds), PCMM 2004: Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success, pp. 577-584, PCMM, Box Hill, Vic. [E2]
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2004) Numerical simulation of carbon transfer within a workpiece in a fluidised bed heat treatment furnance, in Salem, Sam (eds), PCMM 2004 : Proceedings : eight International Conference on Manufacturing & Management : operations management & advanced technology : integration for success, pp. 585-592, PCMM, Box Hill, Vic. [E2]
Hurren, C. J., Lecomte, S. and Wang, X. (2004) Determining residual gum content of bast fibres, in Chen, Xuwei; Ge, Yi and Yan, Xiaoyin (eds), TIWC 2004 : Proceedings of The Textile Institute 83rd World Conference 2004, pp. 1-6, The Textile Institute & Donghua University, Manchester, England [E2]
Khan, Zulfiqar and Wang, Xungai (2004) Research into the production of fine and low hairiness yarns, in Xuwei, Chen; Yi, Ge and Xiaoyin, Yan (eds), Quality textiles for quality life : proceedings of the Textile Institute 83rd World Conference (83rd TIWC), May 23-27, Shanghai, China, pp. 316-319, Textile Institute, Manchester, England [E2]
Le, Vu T., Gunn, Bruce and Nahavandi, Saeid (2004) MRP-production planning in agile manufacturing, 2004 Second International IEEE Conference "Intelligent Systems" : proceedings : June 22-24, 2004, Varna, Bulgaria, pp. 405-410, IEEE Xplore, Piscataway, N.J. [E2]
Madej, L.*, Hodgson, P.D. and Pietrzyk, M.* (2004) Application of identification techniques to determine effect of carbon content in steels on rheological parameters during hot deformation, in Ghosh, S.; Castro, J.C. and Lee, J.K. (eds), NUMIFORM 2004 : Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes : Materials Processing and Design : Modelling, Simulation and Applications, pp. 554-559, American Institute of Physics, Melville, N.Y. [E2]
Madej, L.*, Hodgson, P., Gawad, J.* and Pietrzyk, M.* (2004) Modelling of the rheological behavior and microstructure evolution using the cellular automaton technique, ESAFORM 2004 : The 7th ESAFORM Conference on Material Forming, pp. 143-146, Norwegian Institute of Science and Technology, Trondheim, Norway [E2]
Nanayakkara, M., Kelly, G. and Hodgson, P. (2004) Effect of contact pressure and lubrication on the coating characteristics, surface tribology and friction in forming zince coated sheet steel, in Haque, E.; Haseeb, A.; Rashid, A.; Islam, M. and Moniruzzaman, M. (eds), SPPM 2004 : Proceedings of the 2nd International Conference on Structure, Processing and Properties of Materials, pp. 313-320, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh [E2]
Palmowski, L., Wilson, H. and Baskaran, K. (2004) Lab-scale anaerobic treatment of organic waste streams : an Australian experience, in National Research Council Canada (ed.), Anaerobic Digestion 2004 : Anaerobic bioconversion - answer for sustainability. World congress Proceedings, pp. 2551-2554, National Research Council Canada, Montreal, Canada [E2]
Palmowski, Laurence (2004) Anaerobic digestion : a sustainable answer for the juice and fruit-processing industries, Anaerobic Digestion 2004 : Anaerobic bioconversion - answer for sustainability. World congress, 10, Montreal August 29 - September 2, 2004., National Research Council Canada, Montreal, Canada [E2]
Rolfe, B., Abdallah, S.*, West, G.* and Cardew-Hall, M.* (2004) FE robustness : comparing sheet metal forming variation and finite element models, in Ghosh, Somnath; Castro, Jose M. and Lee, June K. (eds), NUMIFORM 2004 : Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes : Materials Processing and Design : Modelling, Simulation and Applications, pp. 958-963, American Institute of Physics, Melville, N.Y. [E2]
Tang, Z., Wang, X., Fraser, B.* and Wang, L. (2004) Simulations of yarn winding in ring spinning, AUTEX 2004 : World Textile Conference, 4th AUTEX Conference Proceedings, ENSAIT, Roubaix, France [E2]
Tucker, Barry and Palmer, Stuart (2004) Integration of information literacy training into engineering and technology education, in Victorian Association for Library Automation Inc. (ed.), Breaking Boundaries: Integration & Interoperability : conference proceedings, 12th Biennial Conference and Exhibition, Victorian Association for Library Automation Inc., Croydon, Vic. [E2]
Wallace, A., Brownrigg, Allan, Hodgson, Peter and Frawley, L.* (2004) The effect of boron on low carbon rods and galvanised wires, MS & T 2004 : Materials science & technology : September 26-29, 2004, New Orleans, Louisiana, pp. 275-286, MS & T, New Orleans, Louisiana [E2]
Wang, H. and Wang, X. (2004) Hemp processing with Microwave and Ultrasonic Treatments, in College of Textiles, Donghua University (eds), TIWC 2004 : Proceedings of The Textile Institute 83rd World Conference, pp. 779-782, The Textile Institute & Donghua University, Manchester, England & Shanghai, China [E2]
Wang, L., Gao, W. and Wang, X. (2004) Modelling the force of pulling a fibre through a series of pins, AUTEX 2004 : World Textile Conference, 4th AUTEX Conference Proceedings, pp. 1-6, ENSAIT, Roubaix, France [E2]
Wang, Lijing, Liu, Xin and Wang, Xungai (2004) Changes in fibre curvature during the processing of wool and alpaca fibres and their blends, in Chen, Xuwei; Ge, Yi and Yan, Xiaoyin (eds), TIWC 2004 : Proceedings of The Textile Institute 83rd World Conference 2004, pp. 1-6, The Textile Institute & Donghua University, Manchester, England [E2]
Wang, X., Wang, L. and Liu, X. (2004) Softness of alpaca and wool fibre materials, in Xuwei, Chen; Yi, Ge and Xiaoyin, Yan (eds), Quality textiles for quality life : proceedings of the Textile Institute 83rd World Conference (83rd TIWC), May 23-27, Shanghai, China, pp. 453-456, Textile Institute, Manchester, England [E2]
Wang, Xungai, Wang, Lijing, Liu, Xin and Wang, Huimin (2004) The softness of alpaca fibres, Growth with Diversity : Australian Alpaca Association National Conference : Proceedings, pp. 71-75, Australian Alpaca Association, Mitcham, Vic. [E2]
Youn, S.*, Park, J.*, Park, C.*, Kim, Yun-Hwan* and Ma, Xiang (2004) Aluminium powder forging process using a rotating platen, in Nie, J. F.; Morton, A. J. and Muddle, B. C. (eds), Aluminium alloys : their physical and mechanical properties : proceedings of the 9th International Conference on aluminium alloys (ICAA9), pp. 212-217, IMEA, North Melbourne, Vic. [E2]
Gao, W. M., Feng, G. S.* and Kong, L. X.* (2004) Progress of Chinese iron and steel industry and requirement for Australian iron ore, PCMM 2004 : Proceedings : 8th International Conference on Manufacturing and Management : Operations Management and Advanced Technology : Integration for Success, PCMM, Box Hill, Vic. [E2.1]
Gao, W. M., Hodgson, P. D. and Kong, L. X.* (2004) Numerical study of gas circulation in heat-treatment furnaces to perform high temperature air combustion, in Salem, Sam (eds), PCMM 2004 : Proceedings : 8th International Conference on Manufacturing and Management : Operations Management and Advanced Technology : Integration for Success, PCMM, Box Hill, Vic. [E2.1]
Lin, T., Wang, H. and Wang, X. (2004) Effects of surfactant on the morphology of electrospun polystyrene nanofibres, PF 2004 : Papers Presented at the Third International Conference on Polymer Fibres, Springer, Manchester, England [E3]
Palmowski, Laurence, Baskaran, Kanagaratnam, Stagnitti, Frank and Allinson, G. (2004) Sustainable water management for the wine industry, in Blair, Rae; Williams, Pat and Pretorius, Sakkie (eds), Proceedings of the twelfth Australian Wine Industry Technical Conference, Australian Wine Industry Technical Conference Inc., Urrbrae, S. Aust. [E3]
Palmowski, Laurence (2004) Potential benefits of anaerobic treatment for winery liquid and solid wastes, in Blair, Rae; Williams, Pat and Pretorius, Sakkie (eds), Proceedings of the twelfth Australian Wine Industry Technical Conference, Australian Wine Industry Technical Conference Inc., Urrbrae, S. Aust. [E3]
Clarke, Adrian Francis K.*, Dennis, Hamish Gray Seymour*, Wang, Xungai and Hurren, Christopher James (2004) Degumming of bast fibres, Degumming of bast fibres, United States (2) [I]
Long, John (2004) Glow-discharge optical emission spectrometry : a powerful tool for surface analysis, Surface Analysis '04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p. 57, John Wiley & Sons, Richland, Wash. [L2]
Long, John, Gao, Weimin and Hodgson, Peter (2004) Depth-profiling of carbon in carburised steel by glow-discharge optical emission spectrometry, Surface Analysis '04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p. 84, John Wiley & Sons, Richland, Wash. [L2]
Long, John and Batchelor, W.* (2004) Cyclic loading measurements of the strength and stiffness of single wood pulp fibres, in Gregersen, Oyvind W. (eds), Progress in Paper Physics Seminar 2004, NTNU, Trondheim, Norway [L2]
Long, John, Paterson, P. J. K.* and Hughes, A. E.* (2004) Calibration of rf-gd-oes for surface analysis on aerospace aluminum alloys, Surface Analysis '04: 26th Annual Symposium on Applied Surface Analysis and 15th Annual Symposium of the Pacific Northwest Chapter AVS Science and Technology Society, p. 43, John Wiley & Sons, Richland, Wash. [L2]
Li, Z., Wang, Xungai and Wang, Lijing (2004) Development of high performance vegetable fibre-mortar composites, in Hodzic, Alma (eds), Modern Science of Advanced Materials (MSAM 2004)- The 1st International Conference in Materials Science, Post Pressed, Flaxton, Qld. [L3]
Nave, M. and Barnett, Matthew (2004) Characterisation of deformed microstructures using field-emission gun scanning electron microscopy (FEG-SEM) and electron backscatter diffraction (EBSD), in Crameri, S.; Horne, M.D.; Hyatt, A.D.; Lucas, L.; Marshall, A.T.; McCulloch, D.G.; Miller, P.R.; Spargo, A.; Van Driel, R.; Veitch, C.; Walker, M. and Ward, J.V. (eds), ACMM18 : Microscopy by the Bay, p. 43, Australian Microscopy and Microanalysis Society, Canberra, A.C.T. [L3]
Ferguson, Clive (2004) Difficult to justify membership, Engineers Australia magazine online, Engineers Australia, Crows Nest, N.S.W. [M]
Grants and Consultancies
Grants with funding during 2004
Research Income - National Competitive Grants
Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]
- 2005: $891,556
- 2004: $656,268
- 2003: $70,964
Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]
- 2005: $107,835
- 2004: $87,723
Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]
- 2005: $310,325
- 2004: $155,527
Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]
- 2005: $98,666
- 2004: $109,122
Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]
- 2005: $122,452
- 2004: $119,738
Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]
- 2005: $24,650
- 2004: $24,107
Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]
- 2005: $24,388
- 2004: $48,296
- 2003: $47,226
- 2002: $46,066
Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]
- 2005: $24,650
- 2004: $24,512
- 2003: $23,578
Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]
- 2005: $24,650
- 2004: $24,130
- 2003: $11,789
Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]
- 2005: $56,689
- 2004: $52,380
- 2003: $49,135
Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]
- 2005: $64,176
- 2004: $62,856
- 2003: $30,709
Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]
- 2004: $11,943
- 2003: $23,853
- 2002: $23,033
- 2001: $22,545
Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]
- 2005: $218,652
- 2004: $390,497
- 2003: $381,699
Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]
- 2005: $78,367
- 2004: $76,755
Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]
- 2005: $62,693
- 2004: $61,404
Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]
- 2005: $11,141
- 2004: $24,148
- 2003: $23,613
- 2002: $23,033
Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]
- 2004: $24,355
- 2003: $23,578
Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]
- 2005: $12,194
- 2004: $48,296
- 2003: $47,226
- 2002: $46,066
Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]
- 2005: $272,295
- 2004: $510,183
- 2003: $502,794
Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]
- 2004: $68,583
- 2003: $67,032
- 2002: $73,570
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]
- 2004: $76,513
- 2003: $117,047
- 2002: $46,066
Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]
- 2004: $244
- 2003: $11,647
- 2002: $23,033
- 2001: $22,545
- 2000: $21,869
Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]
- 2004: $11,943
- 2003: $23,853
- 2002: $23,033
- 2001: $22,545
Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]
- 2004: $94,327
- 2003: $102,644
- 2002: $88,904
Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]
- 2004: $60,026
- 2003: $58,654
- 2002: $30,656
Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]
- 2004: $24,148
- 2003: $23,578
Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]
- 2004: $10,000
Research Income - Other Public Sector Funding
Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]
- 2005: $48,545
- 2004: $48,545
Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]
- 2005: $336,762
- 2004: $1,188,037
- 2003: $1,320,339
Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]
- 2004: $20,000
Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]
- 2004: $15,000
Research Income - Industry and Other Funding
Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]
- 2004: $30,000
Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]
- 2004: $100,790
- 2003: $35,564
Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]
- 2004: $12,000
- 2003: $12,000
- 2002: $12,000
Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]
- 2005: $1,000
- 2004: $10,000
- 2003: $10,000
Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]
- 2004: $6,000
- 2003: $6,000
Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]
- 2004: $35,327
- 2003: $47,614
Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]
- 2004: $15,000
- 2003: $25,000
Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]
- 2004: $7,500
- 2003: $7,500
- 2002: $7,500
Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]
- 2005: $7,000
- 2004: $7,000
- 2003: $7,000
Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]
- 2004: $52,590
- 2003: $58,701
Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]
- 2004: $30,000
- 2003: $30,000
- 2002: $30,000
Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]
- 2004: $25,000
- 2003: $25,000
- 2002: $25,000
Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]
- 2004: $4,990
- 2003: $30,000
- 2002: $30,000
Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]
- 2004: $25,000
- 2003: $64,011
Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]
- 2004: $22,000
Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]
- 2004: $7,109
Research Income - Industry and Other Funding - Australian
Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]
- 2005: $35,000
- 2004: $50,000
- 2002: $95,000
- 2001: $50,000
Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]
- 2005: $50,000
- 2004: $50,000
- 2003: $50,000
- 2002: $50,000
- 2001: $125,000
- 2000: $175,000
- 1999: $200,000
Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]
- 2005: $10,000
- 2004: $10,000
Research Income - Other Funding Sources
Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]
- 2005: $363,598
- 2004: $504,948
- 2003: $402,603
Higher Degree by Research Completions
2004 - Doctor of Philosophy
Aiden Beer. Supervisor: Matthew Barnett
Thesis entitled: The Evolution of Hot Working Stress and Microstructure in Mg-3A1-1Zn.Hossein Beladi. Supervisor: Peter Hodgson
Thesis entitled: Ultrafine Ferrite Formation in Steels through Thermomechanical Processing.Douglas Creighton. Supervisor: Saeid Nahavandi
Thesis entitled: Extending Robust Industrial Optimisation using Simulation and Reinforcement Learning.Daniel Fabijanic. Supervisor: Peter Hodgson
Thesis entitled: A Nitrocarburising and Low-Temperature Chromising Duplex Surface Treatment.Zulfiqar Khan. Supervisor: Xungai Wang
Thesis entitled: An Investigation of Post-Spinning Yarn Engineering.Yuncang Li. Supervisor: Linda Zou
Thesis entitled: Solar Photocatalytic Oxidation System for Colour Removal in Dyeing Effluent.Lisa Norton. Supervisor: Kanagaratnam Baskaran
Thesis entitled: Biosorbent Properties of Biosolids for Aqueous Zinc, Manganese and Cyanide Removal.Stephen Vlahovic. Supervisor: Matthew Barnett
Thesis entitled: Fastener Manufacture by the Warm Forging Process.Aaron Walsh. Supervisor: Peter Hodgson
Thesis entitled: Mathematical Modelling of the Crankshaft Pin Grinding Process.Heidi Wilson. Supervisor: Kanagaratnam Baskaran
Thesis entitled: Innovative Reuse Options for Water Treatment Plant Sludges.Jianying Xu. Supervisor: Xungai Wang
Thesis entitled: Improved Extraction of Heavy Metal Ions using Membrane Technology.2004 - Doctor of Technology
Soon Huat Ong. Supervisor: Saeid Nahavandi
Thesis entitled: A Wavelet-Based Ammunition Doppler Radar System.2004 - Master of Engineering
Joshua Mackley. Supervisor: Saeid Nahavandi
Thesis entitled: Extracting Fingerprint Features using Textures.Michael Roberts. Supervisor: Eric J. Hu
Thesis entitled: A Modified Life Cycle Inventory of Aluminium Die Casting.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Friday 17th May 2013 10:04pm
