2005 School of Engineering Research Output
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
Cao, Zhi-Qiang*, Tan, Min*, Nahavandi, Saeid and Gu, Nong (2005) Cooperative hunting by multiple mobile robots based on local interaction, in Kordic, Vedran (eds), Cutting edge robotics, pp. 397-406, Pro Literatur Verlag Robert Mayer-Scholz, Mammendorf, Germany [B1]
DRO entry for this publication
Xiao, Nan-Feng and Nahavandi, Saeid (2005) An active stereo vision-based learning approach for robotic tracking, fixating and grasping control, in Kordic, Vedran (eds), Cutting edge robotics, pp. 175-182, Pro Literatur Verl, Mammendorf, Germany [B1]
Barnett, Matthew, Keshavarz, Zohreh and Nave, Mark (2005) Microstructural features of rolled mg-3Al-1Zn, Metallurgical and materials transactions A, vol. 36A, no. 7, pp. 1697-1704, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-23644458560
Citation counts:Scopus - 26
Barnett, Matthew, Davies, C. H. J.* and Ma, Xiang (2005) An analytical constitutive law for twinning dominated flow in magnesium, Scripta materialia, vol. 52, no. 7, pp. 627-632, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-12344329693
Citation counts:Barnett, Matthew (2005) Texture, twinning and uniform elongation of wrought magnesium, Materials science forum, vol. 495-497, pp. 1079-1084, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Beer, Aiden and Barnett, Matthew (2005) The influence of twinning on the hot working flow stress and microstructural evolution of magnesium alloy AZ31, Materials Science Forum, vol. 488, no. 489, pp. 611-614, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Beladi, Hossein, Hodgson, Peter and Barnett, Matthew (2005) Mapping the hot deformation microstructure of Ni-30Fe alloy, ISIJ international, vol. 45, no. 12, pp. 1893-1896, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-33344471187
Citation counts:Beltran, Rafael, Wang, Lijing and Wang, Xungai (2005) Predicting the pilling propensity of fabrics through artificial neural network modeling, Textile research journal, vol. 75, no. 7, pp. 557-561, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-24944440627
Citation counts:Thomson - 26
Cartmill, M., Barnett, Matthew, Zahiri, S.* and Hodgson, Peter (2005) An analysis of the transition between strain dependent and independent softening in austenite, ISIJ international, vol. 45, no. 12, pp. 1903-1908, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-33244470179
Citation counts:Chee, Frederick*, Savkin, Andrey V.*, Fernando, Tyrone L.* and Nahavandi, Saeid (2005) Optimal H∞ insulin injection control for blood glucose regulation in diabetic patients, IEEE transactions of biomedical engineering, vol. 52, no. 10, pp. 1625-1631, IEEE Xplore, Piscataway, N.J. [C1]
ERA journal ID: 5043 – Scopus EID: 2-s2.0-26444463718
Citation counts:Fabijanic, Dan, Kelly, Georgina, Long, John and Hodgson, Peter (2005) A nitrocarburising and low-temperature chromising duplex surface treatment, Materials forum, vol. 29, pp. 77-82, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal listFoitzik, Richard, Kaynak, Akif, Beckmann, Jens* and Pfeffer, Frederick (2005) Soluble poly-3-alkylpyrrole polymers on films and fabrics, Synthetic metals, vol. 155, no. 1, pp. 185-190, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-27744529665
Citation counts:Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2005) Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds, International journal of materials & product technology, vol. 24, no. 1-4, pp. 319-338, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-27844589510
Citation counts:Ghafouri, M. and Swain, C.E. (2005) Spatial analysis of urban stormwater quality, Journal of spatial hydrology, vol. 5, no. 1, pp. 33-46, Spatial Hydrology, Humble, Tex. [C1]
ERA journal ID: Not matching ERA journal listHilditch, Tim and Hodgson, Peter (2005) Development of the sheared edge in the trimming of steel and light metal sheet, part 2 - mechanisms and modelling, Journal of materials processing technology, vol. 169, no. 2, pp. 192-198, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-26444559018
Citation counts:Hilditch, Tim and Hodgson, Peter (2005) Development of the sheared edge in the trimming of steel and light metal sheet, part 1 - experimental observations, Journal of materials processing technology, vol. 169, no. 2, pp. 184-191, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-26444459352
Citation counts:Hodgson, Peter, Beladi, Hossein and Kelly, Georgina (2005) Development of ultrafine grained steels through thermomechanical processing, Canadian metallurgical quarterly, vol. 44, no. 2, pp. 179-185, Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, Canada [C1]
ERA journal ID: 4714 – Scopus EID: 2-s2.0-29844432174
Citation counts:Hodgson, Peter, Beladi, Hossein and Barnett, Matthew (2005) Grain refinement in steels through thermomechanical processing, Materials science forum, vol. 500, no. 501, pp. 39-48, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Hu, Eric (2005) The core of the global warming problem: energy, International journal of global energy issues, vol. 23, no. 4, pp. 354-359, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 36507 – Scopus EID: 2-s2.0-20144364666Hu, Eric, Kaynak, Akif and Li, Yuncang (2005) Development of a cooling fabric from conducting polymer coated fibres: proof of concept, Synthetic metals, vol. 150, no. 2, pp. 139-143, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-17644383310
Citation counts:Kaynak, Akif and Håkansson, Eva* (2005) Generating heat from conducting polypyrrole-coated PET fabrics, Advances in polymer technology, vol. 24, no. 3, pp. 194-207, Wiley Interscience, Malden, Mass. [C1]
ERA journal ID: 44456 – Scopus EID: 2-s2.0-25444533617
Citation counts:Keshavarz, Zohreh and Barnett, Matthew (2005) Observation of deformation modes in Mg-3Al-1Zn, Materials forum, vol. 29, pp. 382-386, Institute of Materials Engineering Australasia Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Khalife, Mohsen, Gwyther, Janet and Aberton, John (2005) Land use, water quality and ecological responses in Lake Colac – trends from Australia, Management of environmental quality: an international journal, vol. 16, no. 4, pp. 362-379, Emerald, Bradford, England [C1]
ERA journal ID: 5887 – Scopus EID: 2-s2.0-21244454498
Citation counts:King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2005) Pin on disc wear investigation of nitrocarburised H13 tool steel, Surface engineering, vol. 21, no. 2, pp. 99-106, Maney Publishing, London, England [C1]
ERA journal ID: 4845 – Scopus EID: 2-s2.0-27144526182
Citation counts:King, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2005) Ammonia dissociation in the fluidised bed furnace, Materials forum, vol. 29, pp. 98-102, Institute of Materials Engineering Australasia Pty Ltd, Australia [C1]
ERA journal ID: Not matching ERA journal listKing, P. C., Reynoldson, R. W.*, Brownrigg, Allan and Long, John (2005) Ferritic nitrocarburising of tool steels, Surface engineering, vol. 21, no. 2, pp. 86-98, Maney Publishing, London, England [C1]
ERA journal ID: 4845 – Scopus EID: 2-s2.0-27144557283
Citation counts:Lee, Ho-Won*, Kwon, Hyuck-Cheol*, Im, Yong-Taek, Hodgson, Peter and Zahiri, S. (2005) Local Austenite grain size distribution in hot bar rolling of AISI 4135 Steel, ISIJ International, vol. 45, no. 5, pp. 706-712, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-22544450189
Citation counts:Lin, Tong, Wang, Lijing, Wang, Xungai and Kaynak, Akif (2005) Polymerising pyrrole on polyester textiles and controlling the conductivity through coating thickness, Thin solid films, vol. 479, no. 1-2, pp. 77-82, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1156 – Scopus EID: 2-s2.0-15344348046
Citation counts:Lin, Tong, Wang, Hongxia and Wang, Xungai (2005) Self-crimping bicomponent nanofibres electrospun from polyacrylonitrile and elastomeric polyurethane, Advanced materials, vol. 17, no. 22, pp. 2699-2703, Wiley-VCH, Weinheim, Germany [C1]
ERA journal ID: 4865 – Scopus EID: 2-s2.0-27944509230
Citation counts:Lin, Tong, Wang, Hongxia, Wang, Huimin and Wang, Xungai (2005) Effects of polymer concentration and cationic surfactant on the morphology of electrospun polyacrylonitrile nanofibres, Journal of materials science & technology, vol. 21, no. Supplement 1, pp. 1-4, Zhongguo Kexueyuan, Jinshu Yanjiusuo, Shenyang, China [C1]
ERA journal ID: 4724 – Scopus EID: 2-s2.0-21844440813
Citation counts:Luo, Yonggang, Zou, Linda and Hu, Eric (2005) A comparative study on preparation of TiO2 pellets as photocatalysts based on different precursors, Materials science forum, vol. 475, no. 479, pp. 4165-4170, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal listNanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming, Materials forum, vol. 29, pp. 114-118, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal listNanayakkara, N.K.B.M.P., Long, John and Hodgson, Peter (2005) Interaction between the coating characteristics of galvanneal steel and forming parameters during flat die drawing, Materials forum, vol. 29, pp. 340-344, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal listNave, Mark and Barnett, Matthew (2005) Understanding the deformed microstructure of cold-rolled IF and LC steel, Materials forum, vol. 29, pp. 562-567, Institute of Materials Engineering Australasia, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal listNguyen, Van Khanh and Xiang, Yong (2005) MMSE precoder for unitary space–time codes in correlated time-varying channels, IEEE signal processing letters, vol. 12, no. 8, pp. 569-572, IEEE Signal Processing Society, New York, N.Y. [C1]
ERA journal ID: 4438 – Scopus EID: 2-s2.0-23944526086
Citation counts:Palmer, Stuart, Joud, I. and Wang, Xungai (2005) Characterization and application of objective pilling classification to patterned fabrics, Journal of the textile institute, vol. 96, no. 6, pp. 423-430, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-28344446687
Citation counts:Pathirana, Pubudu, Bulusu, Nirupama*, Savkin, Andrey* and Jha, Sanjay* (2005) Node localization using mobile robots in delay-tolerant sensor networks, IEEE transactions on mobile computing, vol. 4, no. 3, pp. 285-296, Institute of Electrical and Electronics Engineers, New York, N.Y. [C1]
ERA journal ID: 5073 – Scopus EID: 2-s2.0-19944390963
Citation counts:Scott, R.I. and Hodgson, Peter (2005) The mechanical characterization of low work hardening, high strength steel, Journal of ASTM International, vol. 2, no. 9, pp. 1-15, ASTM International, West Conshohocken, PA [C1]
ERA journal ID: 39904 – Scopus EID: 2-s2.0-30644470397Tan, Seng Sing, Zou, Linda and Hu, Eric (2005) Photocatalytic reduction of carbon dioxide, Research journal of chemistry and environment, vol. 9, no. 1, pp. 66-73, Chemenviron, Indore, India [C1]
ERA journal ID: 41999 – Scopus EID: Not taggedTrinh, Hieu and Zhang, Jingxin* (2005) Design of reduced-order scalar functional observers, International journal of innovative computing, information and control, vol. 1, no. 4, pp. 791-799, ICIC International, Kumamoto, Japan [C1]
ERA journal ID: 3492 – Scopus EID: Not tagged
Citation counts:Wang, Hongxia, Lin, Tong and Kaynak, Akif (2005) Polypyrrole nanoparticles and dye absorption properties, Synthetic metals, vol. 151, no. 2, pp. 136-140, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-20544449376
Citation counts:Wang, H.M. and Wang, Xungai (2005) Surface morphologies and internal fine structures of bast fibers, Fibers and polymers, vol. 6, no. 1, pp. 6-12, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-21644456670
Citation counts:Wang, Huimin, Liu, Xin and Wang, Xungai (2005) Internal structure and pigment granules in colored alpaca fibers, Fibers and polymers, vol. 6, no. 3, pp. 263-268, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-27144466431
Citation counts:Wang, Lijing, Lin, Tong, Wang, Xungai and Kaynak, Akif (2005) Frictional and tensile properties of conducting polymer coated wool and alpaca fibers, Fibers and polymers, vol. 6, no. 3, pp. 259-262, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-27144454092
Citation counts:Watson, B. M., Srikanthan, R.*, Selvalingam, Selva and Ghafouri, M. (2005) Evaluation of three daily rainfall generation models for SWAT, Transactions of the ASAE, vol. 48, no. 5, pp. 1697-1711, American Society of Agricultural Engineers, St. Joseph, Mich. [C1]
ERA journal ID: 3442 – Scopus EID: 2-s2.0-28944435014
Citation counts:Wen, Cui'e, Yamada, Yasuo* and Hodgson, Peter (2005) Fabrication of novel metal alloy foams for biomedical applications, Materials forum, vol. 29, pp. 274-278, IMEA, North Melbourne, Vic [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Yamada, Yasuo*, Wen, Cui'e, Asahina, T.* and Mabuchi, M.* (2005) The effect of artificial defects on the compressive properties of hollow sphere cellular aluminium (HSCA), Materials forum (CD-ROM), vol. 29, pp. 525-529, Institute of Materials Engineering Australasia Pty Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Yamada, Y.*, Wen, Cui'e, Asahina, T.*, Kato, K.*, Sonoda, T.* and Mabuchi, M.* (2005) Compressive properties and energy absorption of hollow sphere aluminium, Materials science forum, vol. 475, no. 479, pp. 333-336, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal listYamada, Yasuo*, Banno, Takumi*, Xie, Zhenkai* and Wen, Cui'e (2005) Energy absorption and crushing behaviour of foam-filled aluminium tubes, Materials transactions, vol. 46, no. 12, pp. 2633-2636, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-32344440803
Citation counts:Zahiri, Saden H., Davies, Chris H.J.* and Hodgson, Peter (2005) A mechanical approach to quantify dynamic recrystallization in polycrystalline metals, Scripta materialia, vol. 52, no. 4, pp. 299-304, Pergamon, Tarrytown, NY [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-9544233550
Citation counts:Zhang, Jin and Fox, Bronwyn (2005) Effect of the manufacturing process on the interlaminar fracture toughness of 2/2 twill weave fabric carbon/epoxy composites, Materials forum (CD-ROM), vol. 29, pp. 216-221, Institute of Materials Engineering Australasia Pty Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:Zou, Linda, Li, Yuncang and Hu, Eric (2005) Photocatalytic decolorization of lanasol blue CE dye solution using a flat-plate reactor, Journal of environmental engineering, vol. 131, no. 1, pp. 102-107, American Society of Civil Engineers, New York, N.Y. [C1]
ERA journal ID: 4357 – Scopus EID: 2-s2.0-11844269832
Citation counts:Wang, Huimin and Wang, Xungai (2005) Correlation between optical and SEM measurements of wool cortical cell size, Research journal of textile and apparel, vol. 9, no. 3, pp. 23-28, Hong Kong Institution of Textile and Apparel, Hung Hom, Hong Kong [C1.1]
ERA journal ID: 3546 – Scopus EID: Not taggedHodgson, Peter, Shokouhi, A. and Beladi, Hossein (2005) Microstructural evolution during dynamic strain-induced transformation, Zairyo to purosesu, vol. 18, pp. 1315-1318, Nippon Tekko Kyokai, Tokyo, Japan [C2]
ERA journal ID: 4856 – Scopus EID: Not taggedHodgson, Peter, Shokouhi, Alireza, Dehghan-Manshadi, A. and Beladi, Hossein (2005) Grain refinement through controlled thermomechanical processing, Iron and steel supplement, vol. 40, pp. 31-38, Metallurgical Industry Press, China [C3]
ERA journal ID: Not matching ERA journal listShokouhi, Alireza and Hodgson, Peter (2005) The role of dynamic recrystallisation in grain refinement through strain induced transformation, Iron and steel supplement, vol. 40, pp. 247-252, Editorial Committee of Iron and Steel, Beijing, China [C3]
ERA journal ID: Not matching ERA journal listHerring, M.L., Kelly, G.L., Mardel, J.I.*, Forrest, M.A., Law, H.* and Fox, B.L. (2005) Composites for automotive body panels, Materials Australia, vol. 38, no. 2, pp. 12-13, Great Southern Press, Melbourne, Vic. [C3.1]
ERA journal ID: Not matching ERA journal listBarnett, Matthew and Atwell, Dale (2005) Extrusion limits of some magnesium alloys in relation to AA6063, in Unknown (ed.), Proceedings of the 3rd Australasian - Pacific Aluminium Extrusion Conference., pp. 1-8, IMEA, North Melbourne, Vic. [E1]
Bishop, Adrian and Pathirana, Pubudu (2005) Sensor fusion based localization of a mobile user in a wireless network, in Unknown (ed.), Tencon 2005 - 2005 IEEE region 10 conference : Melbourne, Australia, 21-24 November 2005, pp. 1-7, IEEE, Piscataway, N.J. [E1]
Brady, P. Rex and Wang, Xungai (2005) Cashmere and wool cortical cells, in Zhi, Z.; Meirong, Z.; Jun, T.; Guifen, Y.; Hong, Z. and Cuifang, W. (eds), Proceedings of the 3rd International Cashmere Determination Technique Seminar - Paper Collection, pp. 149-158, The Seminar, Erdos, Inner Mongolia [E1]
Fielding, Michael, Mullins, James, Nahavandi, Saeid and Creighton, Douglas (2005) Intelligent headrest, in Jamshidi, M.; Tunstel (Jr), E.; Anderson, G.; Fathi, M.; Dozier, G.; Johnson, M. and Chen, P. (eds), Proceedings of the 2005 IEEE international conference on systems, man and cybernetics, pp. 1240-1245, IEEE Xplore, Piscataway, N.J. [E1]
Frayman, Yakov and Rolfe, Bernard (2005) A loop-shaping approach to intelligent control, in Hamza, M. H. (eds), Proceedings of the second IASTED International Conference on Biomedical Engineering : February 16-18, 2004, Innsbruck, Austria, pp. 103-108, ACTA Press, Anaheim, Calif [E1]
Ghamami, K. and Hu, Eric (2005) Development of an energy flow model to assist improving energy efficiency in coal power station, in Pratt, Steven and Davies, Clive E. (eds), APCSEET 2005 : Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies, Wellington, New Zealand, 8-11 May 2005, pp. 111-115, Massey University, Palmerston North, New Zealand [E1]
Gu, Nong, Xiang, Yong, Tan, Min* and Cao, Zhiqiang* (2005) Adaptive blind channel equalization based on constellation information of MPSK signal, in J. C. Hung (ed.), 2005 IEEE International Conference on Industrial Technology IEEE ICIT 2005, Hong Kong : conference proceedings : 14-17 December 2005, City University of Hong Kong, pp. 146-151, IEEE Xplore, Piscataway, N.J. [E1]
Gu, Nong, Xiang, Yong and Nahavandi, Saeid (2005) A modified CM algorithm for blind equalization of MPSK signals, in Unknown (ed.), Eighth International Symposium on Signal Processing and Its Applications, pp. 291-294, IEEE Xplore, Piscataway, N.J [E1]
Ha, Q.*, Trinh, Hieu and Dissanayake, G.* (2005) A distributed approach to global feedback control of multi-agent systems, in Santiprabhob, P. and Daengdej, J. (eds), InTech'05 : Proceedings of the 6th International Conference on Intelligent Technologies, pp. 67-72, Assumption University, Phuket, Thailand [E1]
Hall, Wayne, Ferguson, Clive, Jones, Trevor and Palmer, Stuart (2005) Improving on- and off-campus student performance in structural mechanics, in Radcliffe, David and Humphries, Josh (eds), ASEE/AaeE 2005 : Program and proceedings : 4th ASEE/AaeE Global Colloquium on Engineering Education, School of Engineering, The University of Queensland, Brisbane, Qld [E1]
Jacobs, Simon and Barnett, Matthew (2005) Influence of grain size on the low temperature formability of AZ31B sheet, in Martin, J-P. (eds), Light Metals 2005: proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada, pp. 151-161, Canadian Institute of Mining (CIM), Montreal, Quebec [E1]
Keshavarz, Zoreh and Barnett, Matthew (2005) In-situ investigation of twinning behaviour in Mg-3Al-1Zn, in Neelameggham, N. R.; Kaplan, H. I. and Powell, B. R. (eds), Magnesium technology 2005 : proceedings of the symposium, pp. 171-175, TMS, Warrendale, Pa. [E1]
Khalife, Mohsen and Lustig, Terry* (2005) Flushing away professionalism : is it unsustainable?, in Patterson, R. A. and Jones, M. J. (eds), On-site '05 : Performance Assessment for On-site Systems : Regulation, Operation and Monitoring : Proceedings of On-site '05 Conference, pp. 273-279, Lanfax Laboratories, Armidale, N.S.W. [E1]
Khalife, Mohsen (2005) Use of plastic and textile media in polishing primary treated effluent, in Patterson, R. A. and Jones, M. J. (eds), On-site '05 : Performance Assessment for On-site Systems : Regulation, Operation and Monitoring : Proceedings of On-site '05 Conference, pp. 265-271, Lanfax Laboratories, Armidale, N.S.W. [E1]
Kunz, Donna, Wang, Xungai and Wang, Lijing (2005) A comparison of pilling results tested with the ICI pill box and a new perspex™ pill box, in Zhi, Z.; Meirong, Z.; Jun, T.; Guifen, Y.; Hong, Z. and Cuifang, W. (eds), Proceedings of the 3rd International Cashmere Determination Technique Seminar - Paper Collection, pp. 286-296, The Seminar, Erdos, Inner Mongolia [E1]
Li, Z, Wang, Lijing, Wang, Xungai and Nahavandi, Saeid (2005) A new method for impact properties measurement of natural fibre-reinforced cement composites, in Lü, Z.; Wu, Z.; Li, A. and Meng, S. (eds), Innovation & sustainability of structures : proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering, Southeast University, Nanjing, China, November 20-22, 2005, pp. 2177-2190, Southeast University Press, Nanjing, China [E1]
Long, John and Hartas, K. J. (2005) An AC signal-generator and PC-oscilloscope test package for distance students in undergraduate electronics, in Radcliffe, David and Humphries, Josh (eds), Proceedings of the 4th ASEE/AaeE Global Colloquium on Engineering Education, School of Engineering, The University of Queensland, Brisbane, QLD [E1]
Ma, Xiang, Barnett, Matthew and Davies, C.H.J.* (2005) Modelling the influence of strain on the yield surface of magnesium, in Banabic, Dorel (eds), Proceedings of the 8th ESAFORM Conference on Material Forming, pp. 395-398, Publishing House of the Romanian Academy, Bucharest, Romania [E1]
Ma, X and Barnett, Matthew (2005) An upper bound analysis of forward extrusion through rotating dies, in Banabic, Dorel (eds), Proceedings of the 8th ESAFORM Conference on Material Forming, pp. 565-568, Publishing House of the Romanian Academy, Bucharest, Romania [E1]
Mullins, James, Mawson, Chris and Nahavandi, Saeid (2005) Haptic handwriting aid for training and rehabilitation, in Jamshidi, M.; Tunstel (Jr), E.; Anderson, G.; Fathi, M.; Dozier, G.; Johnson, M. and Chen, P. (eds), IEEE International Conference on : Systems, Man and Cybernetics, 2005, pp. 2690-2694, IEEE Xplore, Piscataway, N.J. [E1]
Nanayakkara, N.K.B.M.P., Kelly, Georgina and Hodgson, Peter (2005) A qualitative and quantitative investigation of the surface tribology in forming galvanneal steel, in Xie, M.; Mouritz, A.; Khatibi, A. A.; Gardiner, C. and Chiu, W. K. (eds), Advances in applied mechanics : proceedings of the fourth Australasian Congress on Applied Mechanics Applied Mechanics, pp. 357-362, Institute of Materials Engineering Australasia, North Melbourne, Vic [E1]
Nguyen, Van Khanh (2005) Convergence analysis of multi-stage PIC detectors, in Hung, J. C. (eds), IEEE ICIT 2005 : The Proceedings of the 2005 Institute of Electrical and Electronics Engineers International Conference on Industrial Technology, pp. 1235-1239, Institute of Electrical and Electronics Engineers, Piscataway, N.J. [E1]
Nguyen, Van Khanh (2005) Differential encoding technique for multi-antenna systems with correlated Rayleigh fading channels, in Hung, J. C. (eds), IEEE ICIT 2005 : The Proceedings of the 2005 Institute of Electrical and Electronics Engineers International Conference on Industrial Technology, pp. 916-920, Institute of Electrical and Electronics Engineers, Piscataway, N.J [E1]
Nguyen, Van Khanh and Xiang, Yong (2005) Precoder design for multi-antenna systems with temporally and spatially correlated fading channels, in Hung, J. C. (eds), Proceedings of the IEEE International Conference on Industrial Technology (IEEE ICIT2005), pp. 1141-1146, IEEE Computer Society, Los Alamitos, Calif. [E1]
Nicholson, D., Gunn, Bruce and Nahavandi, Saeid (2005) A decision support tool for resource allocation in batch manufacturing, in Jamshidi, M.; Tunstel (Jr), E.; Anderson, G.; Fathi, M.; Dozier, G.; Johnson, M. and Chen, P. (eds), IEEE International Conference on : Systems, Man and Cybernetics, 2005, pp. 3018-3023, IEEE Xplore, Piscataway, N.J. [E1]
Palmer, Stuart and Bray, Sharyn (2005) Assessing the likely impact of mandatory residential sessions for engineering and technology students, in Radcliffe, David and Humphries, Josh (eds), Program and proceedings : 4th ASEE/AaeE Global Colloquium on Engineering Education : 26-29 September, 2005, Sydney, Australia, pp. 1-8, University of Queensland, Brisbane, Qld. [E1]
Palmer, Stuart and Wang, Xungai (2005) Objective assessment of pilling of nonwoven fabrics using the two dimensional discrete wavelet transform, in Borne, Pierre; Benrejeb, Mohamed; Dangoumau, Nathalie and Lorimier, Lionel (eds), 17th IMACS World Congress scientific computation, applied mathematics and simulation : Paris, France, July 11-15, 2005., International Association for Mathematics and Computers in Simulation (IMACS), New Brunswick, N.J. [E1]
Palmer, Stuart (2005) Review of first-year engineering and technology units based on student unit evaluations, in Radcliffe, David and Humphries, Josh (eds), Proceedings of the 4th ASEE/AaeE Global Colloquium on Engineering Education, School of Engineering, The University of Queensland, Brisbane, Qld [E1]
Pathirana, Pubudu (2005) Location based power control for mobile devices in a cellular network, in Harris, R. and Bradlow, H. (eds), Tencon 2005 - 2005 IEEE region 10 conference : Melbourne, Australia, 21-24 November 2005., pp. 1-6, IEEE, Piscataway, NJ [E1]
Pathirana, Pubudu and Plunkett, Tony (2005) Speed control and policing in a cellular mobile network: SpeedNet, in Dillon, T. and Yu, X. (eds), 2005 3rd IEEE International Conference on Industrial Informatics (INDIN), pp. 572-577, IEEE, Piscataway, N.J. [E1]
Pathirana, Pubudu (2005) Robust terminal attitude navigation for autonomous vehicles, in Harris, R. and Bradlow, H. (eds), Tencon 2005 - 2005 IEEE region 10 conference : Melbourne, Australia, 21-24 November 2005., pp. 1-6, IEEE, Piscataway, N.J. [E1]
Pathirana, Pubudu, Black, Timothy and Nahavandi, Saeid (2005) Terminal approach navigation for autonomous robots in a sensory network, in Dillon. T and Yu, X (eds), 2005 3rd IEEE International Conference on Industrial Informatics (INDIN), pp. 552-557, IEEE Xplore, Piscataway, N.J. [E1]
Pathirana, Pubudu, Black, Timothy and Nahavandi, Saeid (2005) Path planning for sensor data collecting mobile robot, in Palaniswami, M. (eds), Proceedings of the 2005 intelligent sensors, sensor networks and information processing conference, pp. 313-317, IEEE, Piscataway, N.J. [E1]
Pereira, Michael, Asgari, Alireza, de Souza, Timothy, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Sheet forming simulation and springback prediction for AHSS automotive components, in Miles, M. P. and Stoudt, M. R. (eds), Copper for the 21st century : proceedings of the conference held September 25-28, 2005 Pittsburgh, Pennsylvania USA, pp. 51-62, ASM International, Warrendale, Pa. [E1]
Price, Darren J., Walsh, Simon, Nahavandi, Saeid and Creighton, Douglas (2005) Linking discrete event simulation models using HLA, in Jamshidi, M.; Tunstel (Jr), E.; Anderson, G.; Fathi, M.; Dozier, G.; Johnson, M. and Chen, P. (eds), IEEE International Conference on Systems, Man and Cybernetics, 2005, pp. 696-701, IEEE Xplore, Piscataway, N.J. [E1]
Singh, Avtar, Wang, Xungai and Wang, Lijing (2005) An update on the Australian cashmere industry, in Zhi, Zhang; Meirong, Zhang; Jun, Tian; Guifen, Yang; Hong, Zhu and Cuifang, Wang (eds), Proceedings of the 3rd International Cashmere Determination Technique Seminar - Paper Collection, pp. 375-383, Erdos Group, Erdos, Inner Mongolia [E1]
Tan, S. and Hu, Eric (2005) Photo-reduction of carbon dioxide with water vapour into methane using TiO2 pellet catalyst, in Hardin, M. (eds), Chemeca 2005 : proceedings, Engineers Australia, Sydney, N.S.W. [E1]
Tan, S. and Hu, Eric (2005) Preliminary study on photocatalytic reduction of CO2 using TiO2 pellets, in Pratt, Steven and Davies, Clive E. (eds), APCSEET 2005 : Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies, Wellington, New Zealand, 8-11 May 2005, pp. 242-246, Massey University, Palmerston North, New Zeland [E1]
Wang, Mei D., Palmowski, Laurence and Baskaran, Kanagaratnam (2005) Sodium adsorption using activated alumina for application in the dairy industry, in Paw, T. G. (eds), IWA-ASPIRE 2005 : Wastewater management and environmental protection in Asia, selected proceedings of ASPIRE 2005, the 1st International Water Association - Asia Pacific Group conference & exhibition, IWA Publishing, London, England [E1]
Wang, Lijing and Wang, Xungai (2005) Determination of cashmere and wool fibre scale frequency by analysing diameter profiles with fast fourier transform, in Zhi, Z.; Meirong, Z.; Jun, T.; Guifen, Y.; Hong, Z. and Cuifang, W. (eds), Proceedings of the 3rd International Cashmere Determination Technique Seminar - Paper Collection, pp. 107-117, The Seminar, Erdos, Inner Mongolia [E1]
Wang, Xungai (2005) Fiber non-uniformity and its effect on fiber mechanical properties, in Jaffe, Michael (eds), Fall 2005 Annual Meeting and Technical Conference Fibre Science - The Next Generation, pp. 33-35, The Fiber Society, North Carolina State University College of Textiles, Raleigh, NC [E1]
Watson, B., Coops, N.*, Ghafouri, M. and Selvalingam, Selvadore (2005) Simulating leaf area index of eucalyptus forests and pine plantations for a catchment-scale water balance model, in Knee, R. (eds), 29th Hydrology and Water Resources Symposium : water capital, pp. 1-9, Engineers Australia, Canberra, A.C.T. [E1]
Watson, B., Srikanthan, R.*, Selvalingam, Selvadore and Ghafouri, M. (2005) Hydrologic response of SWAT to generated rainfall, in Unknown (ed.), 29th Hydrology and Water Resources Symposium : water capital, 20-23 February 2005, Rydges Lakeside, Canberra, pp. 1-8, Engineers Australia, Canberra, A.C.T. [E1]
Wong, K.L. (2005) Electromagnetic receiving properties of overhead power line, in Negnevitsky, M. (eds), AUPEC 2005 : The Proceedings of Australasian Universities Power Engineering Conference, pp. 34-36, AUPEC, Hobart, Tas. [E1]
Xiang, Y., Nguyen, V.K. and Gu, Nong (2005) Blind equalization of non-irreducible and non-column-reduced channels driven by constant modulus signals, in Hung, J. C. (eds), Proceedings of the IEEE International Conference on Industrial Technology, ICIT 2005, pp. 1136-1140, IEEE Xplore, Piscataway, N.J. [E1]
Xiang, Yong, Gu, Nong and Wong, K.L. (2005) Adaptive blind source separation using constant modulus criterion and signal mutual information, in Hung, J. C. (eds), 2005 IEEE International Conference on Industrial Technology IEEE ICIT 2005, Hong Kong : conference proceedings : 14-17 December 2005, City University of Hong Kong, pp. 1371-1375, IEEE Xplore, Piscataway, N.J. [E1]
Yamada, Yasuo*, Asahina, Tadashi* and Wen, Cui'e (2005) Effect of cell characteristics on the compressive deformation behavior of a closed-cell aluminium, in Singer, R.F.; Korner, C.; Altstadt, V. and Munstedt, H. (eds), Cellular metals and polymers : CMaP : proceedings of the Symposium on Cellular Metals and Polymers, pp. 115-118, Trans Tech Publications Inc., Uetikon-Zuerich, Switzerland [E1]
Yamada, Yasuo*, Banno, T* and Wen, Cui'e (2005) Lotus-structured porous Ti-Al/Ti composite fabricated by self-propagating high temperature synthesis, in F. Holland (ed.), European PM 2005 conference proceedings : Prague Congress Centre, Czech Republic, 2-5 October 2005., pp. 191-195, European Powder Metallurgy Association, Shrewsbury, England [E1]
Zou, L., Luo, Y., Hu, Eric and Hooper, M.* (2005) Degradation of toluene by photocatalysis process, in Pratt, Steven and Davies, Clive E. (eds), APCSEET 2005 : Fifth Asia Pacific Conference on Sustainable Energy and Environmental Technologies, Wellington, New Zealand, 8-11 May 2005, pp. 347-351, Massey University, Palmerston North, New Zealand [E1]
Creighton, Doug and Nahavandi, Saeid (2005) Rapid discrete event simulation model development for complex traffic analysis, in Unknown (ed.), ICIL 2005 : Proceedings of the International Conference on Industrial Logistics, Pergamon, Oxford, England [E1.1]
Herring, Mandy L, Kelly, Georgina L, Mardel, James I* and Fox, Bronwyn L (2005) Surface analysis of environmentally exposed painted composites manufactured from Quickstep and autoclave processes, in Unknown (ed.), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference 2005, pp. 220-225, SAMPE Europe Business Office, Paris, France [E1.1]
Fox, Bronwyn, Looney, Mark G.* and Magniez, Kevin* (2005) Novel nanocomposite fibres for technical textile applications, in Unknown (ed.), Nanocomposities 2005 : Proceedings of the 2005 Nanocomposities conference, Nanocomposities, San Francisco, Calif. [E1.1]
Khan, M. Imad*, Frayman, Yakov and Nahavandi, Saeid (2005) Quality control of high pressure die casting using a neural network, in Pham, D. T.; Eldukhri, E. E. and Soroka, A. J. (eds), Intelligent production machines and systems : first I*PROMS Virtual Conference : 4-15 July 2005, Elsevier, Amsterdam, The Netherlands [E1.1]
Asgari, Alireza, Pereira, Michael, Rolfe, Bernard, Dingle, Matthew and Hodgson, Peter (2005) Design of experiments and springback prediction for AHSS automotive components with complex geometry, in Smith, L.M.; Pourboghrat, F.; Yoon, J.W. and Stoughton, T.B. (eds), NUMISHEET 2005 : Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 215-220, American Institute of Physics (AIP), Melville, N.Y. [E2]
Barnett, Matthew, Atwell, Dale, Davies, C.* and Schmidt, R.* (2005) Grain refinement of magnesium alloy ZM20 prior to and during extrusion, in Kaufmann, Helmut (eds), Proceedings of the 2nd International Light Metals Technology Conference 2005 : 8-10 June 2005, St. Wolfgang, Austria, pp. 161-166, ARC Leichtmetallkompetenzzentrum Ranshofen GMBH, Ranshofen, Austria [E2]
Beltran, Rafael, Khan, Zulfiqar, Wang, Lijing and Wang, Xungai (2005) Predicting the hairiness of worsted spun wool yarns, TIAWC 2005 : A new era : proceedings of the textile Institute 84th Annual World Conference (84th TIAWC) : March 22-25, 2005, Raleigh, N.C., Textile Institute, Manchester, England [E2]
Brady, R. (2005) Intelligent wool fabrics, Proceedings of the 11th International Wool Research Conference, p. 124, The University of Leeds, Leeds, England [E2]
Brady, R. and Wang, X. (2005) Relationships between cortical cell dimensions and fibre diameters of keratinous fibres, Proceedings of the 11th International Wool Research Conference, p. 90, The University of Leeds, Leeds, England [E2]
Brady, R. (2005) Diffusion of dyes into merino wool fibres, Proceedings of the 11th International Wool Research Conference, p. 80, The University of Leeds, Leeds, England [E2]
Cizek, Pavel*, Wynne, B.*, Hodgson, Peter and Muddle, B.* (2005) Effect of simulated thermomechanical processing on the transformation characteristics and microstructure of an X80 pipeline steel, in Buzzichelli, G. (eds), SHSS 2005 : Proceedings of the International Conference on Super-High Strength Steels, Associazione Italiana di Metallurgia, Milano, Italy [E2]
Corbett, Tim, Forrest, Mark, Law, Haydn* and Fox, Bronwyn L. (2005) Melding : a new alternative to adhesive bonding, in Drechsler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference : Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 105-110, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2005) Computational simulation of heat transfer and optimization of sphere regenerators, in Guo, Liejin (eds), Multiphase flow, heat mass transfer and energy conversion : fifth International Symposium held 3-6 July 2005, Xi'an, China, Xi'an Jiaotong University Press, Xi'an, China [E2]
Ghafouri, M. and Swain, C. (2005) Spatial analysis of land use effects on urban stormwater quality, in Engineers Australia (ed.), 29th Hydrology and Water Resources Symposium, pp. 1-6, Engineers Australia, Canberra, A.C.T. [E2]
Gu, N., Yu, W.*, Xiang, Y. and Tan, M.* (2005) An algebraic approach for delay-independent and delay-dependent stability of linear time-delay systems, in Wang, F-Y. (eds), IEEE 2005 : Proceedings of the Networking, Sensing and Control Conference, pp. 185-190, Institute of Electrical and Electronics Engineers, Inc., Piscataway, N.J. [E2]
Li, Q. and Brady, R. (2005) Changes in wool fabric dimensions with temperature in water, Proceedings of the 11th International Wool Research Conference, p. 146, The University of Leeds, Leeds, England [E2]
Liao, Q.*, Brady, R. and Cookson, P. (2005) Dye uptake by wool cortical cells, Proceedings of the 11th International Wool Research Conference, The University of Leeds, Leeds, England [E2]
Lin, Tong, Wang, Hong Xia and Wang, Xungai (2005) Curly polymer nanofibres prepared by side-by-side co-electrospinning of two different polymer solutions, in Bai, Chunli; Xie, Sishen and Xing, Zhu (eds), ChinaNANO 2005; Nanoscience and technology, Trans Tech Publications Ltd., Zurich, Switzerland [E2]
Liu, Xin, Hurren, Christopher and Wang, Xungai (2005) A comparative study of the mechanical properties of wool and alpaca fibres, in Byrne, K. (eds), Proceedings of the 11th International Wool Research Conference, The University of Leeds, Leeds, England [E2]
Long, J., Paterson, P.* and Hughes, A.* (2005) A calibration for surface analysis on aluminium alloys by RF-Glow-Discharge Optical Emission Spectrometry, in Colla, M. (eds), AIP 2005 : Physics for the Nation : The Proceedings of the 16th National Congress of the Australian Institute of Physics, p. 179, Australian Institute of Physics, Parkville, Vic. [E2]
Madej, Lukasz*, Hodgson, Peter, Zmudzki, A.* and Pietrzyk, M.* (2005) A multi scale model to predict material behavior during deformation processes, in Owen, D R J; de Navarra, Eugenio Oñate Ibáñez and Suárez, B . (eds), Complas 2005 : Computational plasticity : fundamentals and applications : proceedings of the Eight International Conference on Computational Plasticity held in Barcelona, Spain, 5th-7th September 2005, Barcelona International Center for Numerical Methods in Engineering, Barcelona, Spain [E2]
Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2005) Criteria for development of the strain localization during deformation in the multi scale analysis model, in Tadeusiewicz, Ryszard; Ligęza, Antoni and Szymkat, Maciej (eds), CMS 2005 : Computer methods and systems, pp. 91-100, Oprogramowanie Naukowo-Techniczne, Kraków, Poland [E2]
Magniez, Kevin, Fox, Bronwyn and Looney, Mark G.* (2005) Novel nanocomposite fibres for technical textile applications : synthesis and characterisation of poly(m-xylene adipamide) montmorillonite nanocomposites, Fifth World Congress Nanocomposites 2005 : August 22-24, 2005, Crowne Plaza Union Square, San Francisco, California, USA, Executive Conference Management, San Francisco, Calif. [E2]
Magniez, Kevin, Fox, Bronwyn L., Looney, Mark G.* and Wang, Xungai (2005) High technology nanocomposite fibres : Development of melt spun semi-aromatic polyamide nanocomposite fibres, in Drechsler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference : Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 501-506, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
Palmowski, Laurence, Gourdellier, Camille, Wang, Dong Mei, Jeyaseelan, Sithamparappillai and Baskaran, Kanagaratnam (2005) Membrane processes for salt removal from dairy-processors effluents, in Leslie, G.; Fane, T.; Craig, K. and Wiesner, D. (eds), AWA Membrane & Desalination Specialty Conference : harvesting water using alternative technologies, 23-25 February 2005, Adelaide, South Australia., Australian Water Association, Artarmon, N.S.W. [E2]
Palmowski, Laurence, Simons, L.* and Brooks, R.* (2005) Ultrasonic treatment to improve anaerobic digestibility of dairy waste streams, in Hartmann, Hinrich and Ahring, Birgitte K. (eds), IWA 2005 : Anaerobic digestion of solid wastes IV : selected papers from the IWA 4th international symposium on anaerobic digestion of solid waste, held in Copenhagen, Denmark, 31 August - 2 September 2005, pp. 187-194, IWA Publishing, London, England [E2]
Silcock, Michael D., Garschke, Claudia, Hall, Wayne and Fox, Bronwyn L. (2005) A novel method of tube manufacture for vehicle crashworthiness utilising the QUICKSTEP™ Process., in Dreschler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference :Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 239-244, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
Tan, S., Zou, L. and Hu, E. (2005) Photo-reduction of CO2 into gaseous hydrocarbon through photocatalytic process, in Li, X. (eds), IGEC 2005 : Proceedings of the 1st International Green Energy Conference, Canadian Society for Mechanical Engineering (CSME), Waterloo, Ont. [E2]
Tang, Zheng Xue, Wang, Xungai and Fraser, B.* (2005) Yarn tension and energy consumption in ring spinning, TIAWC 2005 : A new era : proceedings of the textile Institute 84th Annual World Conference (84th TIAWC) : March 22-25, 2005, Raleigh, N.C., Textile Institute, Manchester, England [E2]
Wang, Lijing, Wang, Xungai and Liu, Xin (2005) Wool and alpaca fibre blends, in Byrne, K. (eds), Proceedings of the 11th International Wool Research Conference, University of Leeds, Leeds, England [E2]
Wang, X. (2005) Diameter variation within single wool fibres and its effect on fibre properties, Proceedings of the 11th International Wool Research Conference, p. 70, The University of Leeds, Leeds, England [E2]
Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2005) The influence of temperature on the formability of metal/polymer/metal-laminates, in Boudeau, N. (eds), IDDRG 2005 : Proceedings of the 24th International Deep-Drawing Research Group Congress, International Deep-Drawing Research Group, Besançon, France [E2]
Zhang, Jin and Fox, Bronwyn (2005) Manufacturing process effects on the mode I interlaminar fracture toughness and nanocreep properties of CFRP, in Drechsler, K. (eds), SAMPE Europe 2005 : Proceedings of the 26th International SAMPE Europe Conference : Nanotechnology Assists Leadership and Success of the Composite Technology, pp. 537-543, SAMPE Europe Business Office, Nuglar, Switzerland [E2]
Kaiser, M., Zou, L. and Hu, E. (2005) Reducing low-level vocs from car-cabin by using photocatalytic reactor, in Inyang, Hilary I. (eds), Bridging the gaps for global sustainable development : the journal of abstracts of presentations at the International Conference on Energy, Environment and Disasters (INCEED) : Charlotte, North Carolina, USA, July 24-30, 2005, pp. 1-11, Global Institute for Energy and Environmental Systems (GIEES), Charlotte, N.C. [E3]
Palmowski, Laurence, Irwin, Darren*, Baskaran, Kanagaratnam, Danne, Michael*, Issa, Jason*, Jeyaseelan, Sithamparappillai, Wang, Dong Mei and Weeks, Michael* (2005) Salt removal from dairy processing waste-streams, in Wiesner, Diane (eds), Organics and salts : worry wastes in water, pp. 1-5, Australian Water Association [E3]
Tan, S., Zou, L. and Hu, E. (2005) Photocatalytic reduction of carbon dioxide into gaseous hydrocarbon using TiO2 pellets, in Heyn, Richard H. and Areste, Michele (eds), ICCDU 2005 : Proceedings of the 8th International Conference on Carbon Dioxide Utilization, p. 44, Elsevier, Amsterdam, The Netherlands [E3]
Bhatti, Asim and Nahavandi, Saeid (2005) Accurate 3D modelling for automated inspection : a stereo vision approach, in Pham, D.T.; Eldukhri, E.E. and Soroka, A.J. (eds), I*PROMS 2005 : The 1st Virtual Conference. Proceedings, pp. 515-520, Elsevier, Amsterdam, The Netherlands [L1.1]
Grants and Consultancies
Grants with funding during 2005
Research Income - National Competitive Grants
Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]
- 2005: $891,556
- 2004: $656,268
- 2003: $70,964
Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]
- 2005: $107,835
- 2004: $87,723
Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]
- 2005: $310,325
- 2004: $155,527
Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]
- 2005: $28,000
Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]
- 2005: $98,666
- 2004: $109,122
Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]
- 2005: $59,889
Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]
- 2005: $122,452
- 2004: $119,738
Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]
- 2005: $24,650
- 2004: $24,107
Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]
- 2005: $76,572
Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]
- 2005: $61,260
Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]
- 2005: $78,129
Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]
- 2005: $50,000
Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]
- 2005: $24,388
- 2004: $48,296
- 2003: $47,226
- 2002: $46,066
Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]
- 2005: $24,650
- 2004: $24,512
- 2003: $23,578
Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]
- 2005: $24,650
- 2004: $24,130
- 2003: $11,789
Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]
- 2005: $56,689
- 2004: $52,380
- 2003: $49,135
Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]
- 2005: $64,176
- 2004: $62,856
- 2003: $30,709
Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]
- 2005: $218,652
- 2004: $390,497
- 2003: $381,699
Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]
- 2005: $78,367
- 2004: $76,755
Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]
- 2005: $62,693
- 2004: $61,404
Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]
- 2005: $24,650
Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]
- 2005: $159,903
Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]
- 2005: $50,000
Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]
- 2005: $26,000
Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]
- 2005: $11,141
- 2004: $24,148
- 2003: $23,613
- 2002: $23,033
Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]
- 2005: $12,194
- 2004: $48,296
- 2003: $47,226
- 2002: $46,066
Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]
- 2005: $272,295
- 2004: $510,183
- 2003: $502,794
Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]
- 2005: $30,958
Research Income - Other Public Sector Funding
Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]
- 2005: $48,545
- 2004: $48,545
Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]
- 2005: $336,762
- 2004: $1,188,037
- 2003: $1,320,339
Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]
- 2005: $10,000
Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]
- 2005: $5,000
Research Income - Industry and Other Funding
Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]
- 2005: $1,000
- 2004: $10,000
- 2003: $10,000
Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]
- 2005: $7,000
- 2004: $7,000
- 2003: $7,000
Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]
- 2005: $39,560
Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]
- 2005: $21,651
Zou, L. TiO2 Nanostructured surfaces [V]
- 2005: $69,982
Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]
- 2005: $12,000
Research Income - Industry and Other Funding - Australian
Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]
- 2005: $35,000
- 2004: $50,000
- 2002: $95,000
- 2001: $50,000
Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]
- 2005: $50,000
- 2004: $50,000
- 2003: $50,000
- 2002: $50,000
- 2001: $125,000
- 2000: $175,000
- 1999: $200,000
Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]
- 2005: $73,786
Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]
- 2005: $30,000
Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]
- 2005: $20,000
Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]
- 2005: $10,000
- 2004: $10,000
Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]
- 2005: $6,000
Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]
- 2005: $46,489
Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]
- 2005: $15,000
Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]
- 2005: $6,000
Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]
- 2005: $12,005
Wang, L. Simulating the process of knife stabbing [V.1]
- 2005: $21,000
Research Income - Industry and Other Funding - International B (Other Income)
Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]
- 2005: $102,564
Research Income - Other Funding Sources
Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]
- 2005: $363,598
- 2004: $504,948
- 2003: $402,603
Higher Degree by Research Completions
2005 - Doctor of Philosophy
Elisabeth Ackers. Supervisor: Matthew Barnett
Thesis entitled: Low Strain Processing of LC and ULC Steels.Judy Blackbeard. Supervisor: Kanagaratnam Baskaran
Thesis entitled: The Effect of Multi-Feeding on Trickling Filter Performance.Alexander Cave. Supervisor: Saeid Nahavandi
Thesis entitled: Optimization of Stochastic Manufacturing Systems using Genetic Algorithms.Sameh El-Sayed. Supervisor: Saeid Nahavandi
Thesis entitled: Linear-Motor Based Five-Axis Parallel Machine for Effective Material Processing.Weimin Gao. Supervisor: Peter Hodgson
Thesis entitled: Heat and Mass Transfer in Fluidised Bed Heat-Treatment Furnaces.Peter King. Supervisor: Allan Brownrigg
Thesis entitled: Fluidised Bed Nitrocarburising of Tool Steels.Dragos Petrescu. Supervisor: Peter Hodgson
Thesis entitled: Prediction of Ductile Fracture in the Cold Forging of Steel.Bo Zhu. Supervisor: Georgina Kelly
Thesis entitled: Tribology of Lubricated Nitrocarburised and Titanium Carbonitride Surfaces.2005 - Doctor of Technology
Pararajasegram Dharmabalan. Supervisor: Selvadore Selvalingam
Thesis entitled: Performance Evaluation and Improved Risk Control Philosophies for Drinking Water Systems.Stanley Jeffery. Supervisor: Richard White
Thesis entitled: Development of a Model to Create Entrepreneurial Technology Businesses.Raul Raiter. Supervisor: Jeyaseelan Sithampar
Thesis entitled: An Integrated System for High Quality Water Recovery and Wastewater Treatment.2005 - Master of Engineering
Donna Kunz. Supervisor: Xungai Wang
Thesis entitled: Assessment of the Pilling Propensity of Wool Knitwear.Vu Thanh Le. Supervisor: Bruce Gunn
Thesis entitled: MRP - Production Planning in Agile Manufacturing.Dean Mason. Supervisor: Alan Khoi Loon Wong
Thesis entitled: Controller Area Network (CAN) Modelling for Automotive Body Control Applications.David Nicholson. Supervisor: Bruce Gunn
Thesis entitled: Decision Support Tool for Production Planning of a Machining Line.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Saturday 18th May 2013 10:04pm
