Research Services Division

Deakin Research

2010 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Wang, Hongxia, Kaynak, Akif and Lin, Tong (2010) An investigation of polypyrrole coated conductive textiles: this research aimed at clarifying some issues occurred in the research project on coloured conductive textiles, Lambert Academic Publishing [A2]
DRO entry for this publication

Nasierding, Gulisong, Tsoumakas, Grigorios* and Kouzani, Abbas Z. (2010) Triple random ensemble method for multi-label classification, Deakin University, Waurn Ponds, Vic [A6]
DRO entry for this publication

Ekanayake, Samitha and Pathirana, Pubudu (2010) RSS based technologies in wireless sensor networks, in Fares, Salma Ait and Adachi, Fumiyuki (eds), Mobile and wireless communications network layer and circuit level design, pp. 37-59, In-Tech, Olajnica, Croatia [B1]
DRO entry for this publication

Ganji, Behnam, Kouzani, Abbas Z. and Trinh, H. M. (2010) Drive cycle analysis of the performance of hybrid electric vehicles, in Li, Kang; Fei, Minrui; Jia, Li and Irwin, George W. (eds), Life system modeling and intelligent computing, pp. 434-444, Springer, Heidelberg, Germany [B1]
Citation counts: Scopus - 1
DRO entry for this publication

Khayyam, Hamid, Kouzani, Abbas, Nahavandi, Saeid, Marano, Vincenzo* and Rizzoni, Giorgio* (2010) Intelligent energy management in hybrid electric vehicles, in Francisco, Maciá Pérez (eds), Energy management, pp. 147-175, INTECH, Vukovar, Croatia [B1]
DRO entry for this publication

Kouzani, Abbas Z. (2010) Multilabel classification using error correction codes, in Cai, Zhihua; Hu, Chengyu; Kang, Zhuo and Liu, Yong (eds), Advances in computation and intelligence, pp. 444-454, Springer-Verlag, Heidelberg, Germany [B1]
DRO entry for this publication

Nasierding, Gulisong and Kouzani, Abbas Z. (2010) Image to text translation by multi-label classification, in Goebel, R.; Siekmann, J. and Wahlster, W. (eds), Advanced intelligent computing theories and applications : with aspects of artificial intelligence, pp. 247-254, Springer-Verlag Berlin Heidelberg, Heidelberg, Germany [B1]
DRO entry for this publication

An, Yang, Yang, Chunhui, Hodgson, Peter and Wen, Cui'e (2010) Effect of pore size on mechanical properties of titanium foams, Materials science forum, vol. 654-656, pp. 827-830, Trans Tech Publications Ltd., Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Anderson, T. N., Duke, M.* and Carson, J. K.* (2010) The effect of colour on the thermal performance of building integrated solar collectors, Solar energy materials and solar cells, vol. 94, no. 2, pp. 350-354, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 4073 – Scopus EID: 2-s2.0-72149122893
Citation counts: Scopus - 17, Thomson - 10
DRO entry for this publication

Anderson, T. N., Duke, M.* and Carson, J. K.* (2010) Suppression of natural convection heat transfer coefficients in an attic shaped enclosure, International communications in heat and mass transfer, vol. 37, no. 8, pp. 984-986, Pergamon, Oxford, England [C1]
ERA journal ID: 3753 – Scopus EID: 2-s2.0-77956059807
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Anderson, T. N., Duke, M.* and Carson, J. K.* (2010) Experimental determination of natural convection heat transfer coefficients in an attic shaped enclosure, International communications in heat and mass transfer, vol. 37, no. 4, pp. 360-363, Pergamon, Oxford, England [C1]
ERA journal ID: 3753 – Scopus EID: 2-s2.0-77649191640
Citation counts: Scopus - 9, Thomson - 8
DRO entry for this publication

Bishop, Adrian N., Savkin, Andrey V.* and Pathirana, Pubudu (2010) Vision-based target tracking and surveillance with robust set-valued state estimation, IEEE signal processing letters, vol. 17, no. 3, pp. 289-292, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 4438 – Scopus EID: 2-s2.0-78149231688
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Bishop, Adrian N.*, Fidan, Baris*, Anderson, Brian D. O.*, Dogancay, Kutlyuil* and Pathirana, Pubudu N. (2010) Optimality analysis of sensor-target localization geometries, Automatica, vol. 46, no. 3, pp. 479-492, Pergamon, Oxford, England [C1]
ERA journal ID: 4400 – Scopus EID: 2-s2.0-77549087894
Citation counts: Scopus - 83, Thomson - 54
DRO entry for this publication

de Souza, Timothy and Rolfe, Bernard F. (2010) Characterising material and process variation effects on springback robustness for a semi-cylindrical sheet metal forming process, International journal of mechanical sciences, vol. 52, no. 12, pp. 1756-1766, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-78049327127
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Duke, M.* and Anderson, T. (2010) Compounding factors and their effect on the design of long range battery electric vehicles, International journal of renewable energy vehicles, vol. 1, no. 1, pp. 1-5, Auckland Institute of Smart Technology, Auckland, New Zealand [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Fernando, Tyrone Lucius*, Trinh, Hieu and Jennings, Les* (2010) Functional observability and the design of minimum order linear functional observers, IEEE transactions on automatic control, vol. 55, no. 5, pp. 1268-1273, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 3596 – Scopus EID: 2-s2.0-77952231118
Citation counts: Scopus - 23, Thomson - 14
DRO entry for this publication

Ganji, Behnam and Kouzani, Abbas Z. (2010) A powertrain vehicle model for look-ahead control, International review on modelling and simulations, vol. 3, no. 5, pp. 955-962, Praise Worthy Prize S.r.L., Naples, Italy [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Golmakani, Abbas*, Mafinejad, Khalil*, Razzaghpour, Milad* and Kouzani, Abbas (2010) Modeling and optimization of a solenoidal integrated inductor for RF ICs, International journal of RF and microwave computer-aided engineering, vol. 20, no. 2, pp. 182-189, John Wiley & Sons, Hoboken, NJ [C1]
ERA journal ID: 3500 – Scopus EID: 2-s2.0-77649194248
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Golmakani, Abbas*, Mafinejad, Khalil* and Kouzani, Abbas (2010) Design and optimization of LNA topologies with image rejection filters, International journal of RF and microwave computer-aided engineering, vol. 20, no. 3, pp. 286-297, John Wiley & Sons, Hoboken, N.J. [C1]
ERA journal ID: 3500 – Scopus EID: 2-s2.0-77954553373
DRO entry for this publication

Hu, Eric*, Yang, Yong Ping*, Nishimura, Akira*, Yilmaz, Ferdi and Kouzani, Abbas (2010) Solar thermal aided power generation, Applied energy, vol. 87, no. 9, pp. 2881-2885, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4005 – Scopus EID: 2-s2.0-77956522952
Citation counts: Scopus - 42, Thomson - 28
DRO entry for this publication

Joordens, Matthew A. and Jamshidi, Mo* (2010) Consensus control for a system of underwater swarm robots, IEEE systems journal, vol. 4, no. 1, pp. 65-73, IEEE, Piscataway, N.J. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 21, Thomson - 10
DRO entry for this publication

Kashef, Sadaf, Asgari, Alireza, Hilditch, Tim B., Yan, Wenyi*, Goel, Vijay K.* and Hodgson, Peter D. (2010) Fracture toughness of titanium foams for medical applications, Materials science and eMaterials science and engineering A : structural materials : properties, microstructures and processing, vol. 527, no. 29-30, pp. 7689-7693, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-77957674254
Citation counts: Scopus - 10, Thomson - 9
DRO entry for this publication

Kaynak, Akif, Yang, Chunhui and Kouzani, Abbas (2010) Synthesis, characterization and analytical modelling of mechanical behavior of a conducting polymer actuator, Materials science forum, vol. 654-656, pp. 2467-2470, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Kaynak, Akif and Foitzik, Richard* (2010) Synthesis and characterization of soluble conducting polymers, Research journal of textile and apparel, vol. 14, no. 2, pp. 45-52, Hong Kong Institution of Textile and Apparel, Hong Kong [C1]
ERA journal ID: 3546 – Scopus EID: Not tagged
DRO entry for this publication

Khoshmanesh, Khashayar, Zhang, Chen*, Nahavandi, Saeid, Tovar-Lopez, Francisco J.*, Baratchi, Sara, Hu, Zheng*, Mitchell, Arnan* and Kalantar-Zadeh, Kourosh* (2010) Particle trapping using dielectrophoretically patterned carbon nanotubes, Electrophoresis, vol. 31, no. 8, pp. 1366-1375, Wiley - V C H Verlag GmbH & Co. KGaA, Weinheim, Germany [C1]
ERA journal ID: 1630 – Scopus EID: 2-s2.0-77951147994
Citation counts: Scopus - 17, Thomson - 16
DRO entry for this publication

Lee, S. L. A., Kouzani, A. Z. and Hu, E. J.* (2010) Random forest based lung nodule classification aided by clustering, Computerized medical imaging and graphics, vol. 34, no. 7, pp. 535-542, Amsterdam, The Netherlands, Elsevier [C1]
ERA journal ID: 15962 – Scopus EID: 2-s2.0-77955659952
Citation counts: Scopus - 15, Thomson - 10
DRO entry for this publication

Lim, Y. C., Kouzani, A. Z. and Duan, W. (2010) Lab-on-a-chip : a component view, Microsystem technologies : sensors actuators systems integration, vol. 16, no. 12, pp. 1995-2015, Springer, Heidelberg, Germany [C1]
ERA journal ID: 4497 – Scopus EID: 2-s2.0-78049469159
Citation counts: Scopus - 36, Thomson - 25
DRO entry for this publication

Lim, Y. C., Kouzani, A. Z. and Duan, W. (2010) Aptasensors : a review, Journal of biomedical nanotechnology, vol. 6, no. 2, pp. 93-105, American Scientific Publishers, Valencia, Calif. [C1]
ERA journal ID: 36588 – Scopus EID: 2-s2.0-77955456288
Citation counts: Scopus - 20, Thomson - 14
DRO entry for this publication

Ma, Lianhua, Rolfe, Bernard F., Yang, Qingsheng* and Yang, Chunhui (2010) A new solution method for homogenization of effective properties of electromagnetic honeycombs, Key engineering materials, vol. 443, pp. 551-556, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-77955435151
DRO entry for this publication

Ma, Lianhua, Rolfe, Bernard F., Yang, Qingsheng* and Yang, Chunhui (2010) On the effective mechanical properties of fluid-saturated composites : a homogenization approach, Materials science forum, vol. 654-656, pp. 2273-2276, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Matuszyk, Timothy I.*, Cardew-Hall, Michael J.* and Rolfe, Bernard F. (2010) The kernel density estimate/point distribution model (KDE-PDM) for statistical shape modeling of automotive stampings and assemblies, Robotics and computer-integrated manufacturing, vol. 26, no. 4, pp. 370-380, Pergamon, Oxford, England [C1]
ERA journal ID: 41932 – Scopus EID: 2-s2.0-77955661530
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Muránsky, O.*, Barnett, M. R., Carr, D. G.*, Vogel, S.* and Oliver, E. C.* (2010) Combined in situ neutron diffraction and acoustic emission of twin nucleation & twin growth in extruded ZM20 Mg alloy, Materials science forum, vol. 652, pp. 149-154, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Nam, Phan T.* and Pathirana, Pubudu (2010) Improvement on delay dependent absolute stability of Lurie control systems with multiple time delays, Applied mathematics and computation, vol. 216, no. 3, pp. 1024-1027, Elsevier Inc, New York, N.Y. [C1]
ERA journal ID: 49 – Scopus EID: 2-s2.0-77949489404
Citation counts: Scopus - 6, Thomson - 3
DRO entry for this publication

Nikhare, Chetan, Asgari, Alireza, Weiss, Matthias and Hodgson, Peter D. (2010) Fracture of DP590 steel : a multi-scale modeling approach, Steel research international, vol. 81, no. 9, pp. 1450-1453, Wiley – VCH Verlag, Weinheim, Germany [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Pathirana, Pubudu N., Bishop, Adrian N., Savkin, Andrey V.*, Ekanayake, Samitha W. and Black,Timothy J. (2010) A method for stereo-vision-based tracking for robotic applications, Robotica, vol. 28, no. 4, pp. 517-524, Cambridge University Press, Cambridge, England [C1]
ERA journal ID: 3624 – Scopus EID: 2-s2.0-77954541516
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Peng, Dezhong and Xiang, Yong (2010) Underdetermined blind separation of non-sparse sources using spatial time-frequency distributions, Digital signal processing, vol. 20, no. 2, pp. 581-596, Academic Press, Maryland Heights, Mo. [C1]
ERA journal ID: 4407 – Scopus EID: 2-s2.0-76349126178
Citation counts: Scopus - 18, Thomson - 46
DRO entry for this publication

Peng, Dezhong, Xiang, Yong and Huang, Defeng* (2010) Estimation of basis frequencies for time-varying SIMO channels : a second-order method, IEEE transactions on signal processing, vol. 58, no. 8, pp. 4026-4039, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 4462 – Scopus EID: 2-s2.0-77954581065
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Peng, Dezhong, Xiang, Yong and Trinh, Hieu (2010) A new blind method for separating M + 1 sources from M mixtures, Computers and mathematics with applications, vol. 60, no. 7, pp. 1829-1839, Pergamon, Oxford, England [C1]
ERA journal ID: 111 – Scopus EID: 2-s2.0-77956393149
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2010) Sliding distance, contact pressure and wear in sheet metal stamping, Wear, vol. 268, no. 11-12, pp. 1275-1284, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-77951107324
Citation counts: Scopus - 14, Thomson - 8
DRO entry for this publication

Pereira, Michael P., Okonkwo, Paul C., Yan, Wenyi* and Rolfe, Bernard F. (2010) Deformation and frictional heating in relation to wear in sheet metal stamping, Steel research international, vol. 81, no. 9, pp. 713-716, Wiley – VCH Verlag, Weinheim, Germany [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 4
DRO entry for this publication

Pereloma, Elena V.*, Timokhina, Ilana B., Hilditch, Tim B. and Hodgson, Peter D. (2010) Effect of manufacturing process on the final properties of advanced high strength steels for automotive applications, Materials science forum, vol. 638-642, pp. 148-153, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Phat, V.N.*, Ha, Q.P.* and Trinh, Hieu (2010) Parameter-dependent H∞ control for time varying delay polytopic systems, Journal of optimization theory and applications, vol. 147, no. 1, pp. 58-70, Springer New York, New York, N.Y. [C1]
ERA journal ID: 40390 – Scopus EID: 2-s2.0-77951952436
Citation counts: Thomson - 4
DRO entry for this publication

Phat, V. N.* and Trinh, H. (2010) Exponential stabilization of neural networks with various activation functions and mixed time-varying delays, IEEE transactions on neural networks, vol. 21, no. 7, pp. 1180-1184, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 4458 – Scopus EID: 2-s2.0-77954562851
Citation counts: Scopus - 44, Thomson - 38
DRO entry for this publication

Rana, Md. Masud* and Kouzani, Abbas Z. (2010) Low complexity MMSE based channel estimation technique for LTE OFDMA systems, International journal of computer science and information security, vol. 8, no. 8, pp. 52-56, LJS Publishing, Pittsburgh, Pa. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Savkin, Andrey V.* and Pathirana, Pubudu N. (2010) Decentralized power control in cellular mobile radio systems with nonlinear and time-varying link gains, Computer communications, vol. 33, no. 10, pp. 1210-1214, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 5063 – Scopus EID: 2-s2.0-77955281428
DRO entry for this publication

Sudharsan, Ranjani, Rolfe, Bernard F. and Hodgson, Peter D. (2010) The indentation behaviour of carbon fibre composite tubes-experiments & modelling, Materials science forum, vol. 654-656, pp. 2616-2619, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Supasuthakul, Jeerachai, Hodgson, Peter D., Weiss, Matthias and Yang, Chunhui (2010) Analytical solutions and finite element modelling of deep drawing process for cylindrical metal cups, Key engineering materials, vol. 443, pp. 104-109, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-77955444923
Citation counts: Scopus - 1
DRO entry for this publication

Tovar-Lopez, Francisco Javier*, Rosengarten, Gary*, Westein, Erik*, Khoshmanesh, Khashayar, Jackson, Shaun P.*, Mitchell, Arnan* and Nesbitt, Warwick S.* (2010) A microfluidics device to monitor platelet aggregation dynamics in response to strain rate micro-gradients in flowing blood, Lab on a chip, vol. 10, no. 3, pp. 291-302, Royal Society of Chemistry, London, England [C1]
ERA journal ID: 30168 – Scopus EID: 2-s2.0-75149121866
Citation counts: Scopus - 37, Thomson - 28
DRO entry for this publication

Trinh, Hieu Minh, Teh, Poh Sim and Fernando, Tyrone Lucius* (2010) Time-delay systems : design of delay-free and low-order observers, IEEE transactions on automatic control, vol. 55, no. 10, pp. 2434-2438, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 3596 – Scopus EID: 2-s2.0-77957708492
Citation counts: Scopus - 12, Thomson - 3
DRO entry for this publication

Xiang, Yong, Ng, Sze Kui and Nguyen, Van Khanh* (2010) Blind separation of mutually correlated sources using precoders, IEEE transactions on neural networks, vol. 21, no. 1, pp. 82-90, IEEE, New York, N.Y. [C1]
ERA journal ID: 4458 – Scopus EID: 2-s2.0-73949150710
Citation counts: Scopus - 21, Thomson - 20
DRO entry for this publication

Yan, Qin*, Yang, Yongping*, Nishimura, Akira*, Kouzani, Abbas and Hu, Eric* (2010) Multi-point and multi-level solar integration into a conventional coal-fired power plant, Energy & fuels, vol. 24, no. 7, pp. 3733-3738, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 3878 – Scopus EID: 2-s2.0-77954783145
Citation counts: Scopus - 20, Thomson - 13
DRO entry for this publication

Zhang, C.*, Khoshmanesh, K., Mitchell, A.* and Kalantar-Zadeh, K.* (2010) Dielectrophoresis for manipulation of micro/nano particles in microfluidic systems, Analytical and bioanalytical chemistry, vol. 396, no. 1, pp. 401-420, Springer, Berlin, Germany [C1]
ERA journal ID: 1610 – Scopus EID: 2-s2.0-72849135355
Citation counts: Scopus - 103, Thomson - 88
DRO entry for this publication

Beladi, Somaieh, Pathirana, Pubudu N. and Brotchie, Peter* (2010) Maximum likelihood estimation for rician distributed data in analytical q-ball imaging, in Unknown (ed.), EMBC 2010 : Proceedings of the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society “Merging Medical Humanism and Technology”, pp. 2702-2705, I E E E, Piscataway, N.J. [E1]
DRO entry for this publication

Beladi, Somaieh, Pathirana, Pubudu N. and Brotchie, Peter* (2010) Robust ODF smoothing for accurate estimation of fiber orientation, in Unknown (ed.), EMBC 2010 : Proceedings of the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society “Merging Medical Humanism and Technology”, pp. 2698-2701, I E E E, Piscataway, N.J. [E1]
DRO entry for this publication

Dharmaweera, Madushanka Nishan*, Khoo, Suiyang and Man, Zhihong* (2010) Navigation of four-wheel-steering mobile robots using robust fault-tolerant sliding mode control, in Unknown (ed.), ICARCV 2010 : 11th International Conference on Control, Automation, Robotics and Vision, pp. 1375-1380, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Dosthosseini, R., Sheikholeslam, F.* and Kouzani, A. Z. (2010) Identification of nonlinear systems using hybrid functions, in Chen, Ben M.; Li, Maoquing; Wang, Jianliang and Luo, Jian (eds), ICCA 2010 : Proceedings of the 8th IEEE International Conference on Control and Automation, pp. 1994-1998, IEEE, Piscataway, N.J. [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Dosthosseini, R., Sheikholeslam, F.*, Askari, J.* and Kouzani, A. Z. (2010) Modeling and control of flatness in cold rolling mill using fuzzy petri nets, in Chen, Ben M.; Li, Maoquing; Wang, Jianliang and Luo, Jian (eds), ICCA 2010 : Proceedings of the 8th IEEE International Conference on Control and Automation, pp. 181-186, IEEE, Piscataway, N.J. [E1]
Citation counts: Scopus - 3
DRO entry for this publication

Fernando, Tyrone*, Jennings, Less* and Trinh, Hieu (2010) Numerical implementation of a functional observability algorithm : a singular value decomposition approach, in unknown (ed.), APCCAS 2010 : Proceedings of the 2010 Asia Pacific Conference on Circuits and Systems, pp. 796-799, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Fernando, Tyrone*, Jennings, Less* and Trinh, Hieu (2010) Functional observability, in Halgamuge, Malka N. (eds), ICIAFS 2010 : Proceedings of the 2010 5th International Conference on Information and Automation for Sustainability : Sustainable Development through Effective Man-machine Co-existence, pp. 421-423, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Ganji, Behnam and Kouzani, Abbas Z. (2010) A study on look-ahead control and energy management strategies in hybrid electric vehicles, in Chen, Ben M.; Li, Maoquing; Wang, Jianliang and Luo, Jian (eds), ICCA 2010 : Proceedings of the 8th IEEE International Conference on Control and Automation, pp. 388-392, IEEE, Piscataway, N.J. [E1]
Citation counts: Scopus - 5
DRO entry for this publication

Ghanbari, Ali*, Chen, Xiaoqi*, Wang, Wenhui*, Horan, Ben, Abdi, Hamid and Nahavandi, Saeid (2010) Haptic microrobotic intracellular injection assistance using virtual fixtures, in Unknown (ed.), ICARCV 2010 : 11th International Conference on Control, Automation, Robotics and Vision, pp. 781-786, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Herath, Sanvidha C. K. and Pathirana, Pubudu N. (2010) Optimal sensor separation for AoA based localization via linear sensor array, in Marusic, S.; Palaniswami, M.; Gubbi, J. and Corke, P. (eds), ISSNIP 2010 : Proceedings of the 6th International Conference on Intelligent Sensors, Sensor Networks and Information Processing, pp. 187-192, IEEE, United States [E1]
DRO entry for this publication

Herath, Sanvidha C. K. and Pathirana, Pubudu N. (2010) Maximum likelihood approach for tracking multiple mobile agents with a moving doppler radar system, in Marusic, S.; Palaniswami, M.; Gubbi, J. and Corke, P. (eds), ISSNIP 2010 : Proceedings of the 2010 Sixth International Conference on Intelligent Sensors, Sensor Networks and Information Processing, pp. 193-198, IEEE, United States [E1]
DRO entry for this publication

Hettiarachchi, Imali T., Pathirana, Pubudu N. and Brotchie, Peter* (2010) A state space based approach in non-linear hemodynamic response modeling with fMRI data, in Unknown (ed.), EMBC 2010 : Proceedings of the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society “Merging Medical Humanism and Technology”, pp. 2391-2394, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Horan, Peter and Luther, Mark B. (2010) Using the psychrometric chart in building measurements, in Unknown (ed.), ANZAScA 2010 : On the border : architectural science in theory & practice : Proceedings of the 44th Annual Conference of the Architectural Science Association, pp. 1-8, ANZAScA, Auckland, New Zealand [E1]
DRO entry for this publication

Islam, Md. Saiful, Kouzani, Abbas Z., Dai, Xiu J. and Michalski, Wojtek P.* (2010) Parameter sensitivity analysis of surface plasmon resonance biosensor through numerical simulation, in Li, Yan; Yang, Jiajia; Wen, Peng and Wu, Jinglong (eds), IEEE/ICME 2010 : Proceedings of the 2010 IEEE/ICME International Conference on Complex Medical Engineering, pp. 171-176, IEEE, Gold Coast, Queensland [E1]
DRO entry for this publication

Islam, Md. Saiful, Kouzani, Abbas Z., Dai, Xiujuan J. and Michalski, Wojtek P.* (2010) 3-D modeling of a carbon nanotube cantilever biosensor, in Unknown (ed.), EMBC 2010 : Proceedings of the 32nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society “Merging Medical Humanism and Technology”, pp. 6535-6538, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Islam, M. S., Kouzani, A. Z., Dai, X. J. and Michalski, W. P.* (2010) Design and analysis of a cantilever biosensor based on a boron nitride nanotube, in Okada, Tatsuo; Araki, Keijiro and Nishino, Hiroaki (eds), TENCON 2010 : Proceedings of the 2010 IEEE Region 10 Conference, pp. 1951-1956, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Islam, M. S., Kouzani, A. Z., Dai, X. J. and Michalski, W. P.* (2010) Optical micro analysis in lab-on-a-chips, in Stamatov, Venelin (eds), ICCMME 2009 : Proceedings of the 2009 Interdisciplinary Conference on Chemical, Mechanical and Materials Engineering, pp. 396-407, Australian Institute of High Energetic Materials, Melbourne, Vic. [E1]
DRO entry for this publication

Khoo, Suiyang, Trinh, Hieu, Man, Zhihong* and Shen, Weixiang* (2010) Fast finite-time consensus of a class of high-order uncertain nonlinear systems, in Huang, Jie (eds), ICIEA 2010 : Proceedings of the 5th IEEE Conference on Industrial Electronics and Applications, pp. 2076-2081, IEEE Xplore, New York, N.Y. [E1]
DRO entry for this publication

Khoo, Suiyang, Xie, Lihua* and Man, Zhihong* (2010) Leader-follower consensus control of a class of nonholonomic systems, in Unknown (ed.), ICARCV 2010 : 11th International Conference on Control, Automation, Robotics and Vision, pp. 1381-1386, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Kouzani, A. Z., Lee, S. L. A. and Joordens, M. (2010) Analysis of twelve electrical and electronics engineering programs, in Gardner, Anne and Jolly, Lesley (eds), AAEE 2010 : Past, Present, Future : Proceedings of the 21st Conference for the Australasian Association for Engineering Education 2010, pp. 397-402, University of Technology, Sydney, Sydney, N.S.W. [E1]
DRO entry for this publication

Kouzani, Abbas Z., Ivankovic, Mile, Fielding, Michael, Kaynak, Akif, Yang, Chunhui, Duan, Wei and Hu, Eric J.* (2010) Design and construction of a micropump for drug delivery applications, in Li, Yan; Yang, Jiajia; Wen, Peng and Wu, Jinglong (eds), IEEE/ICME 2010 : Proceedings of the 2010 International Conference on Complex Medical Engineering, pp. 182-187, IEEE, Gold Coast, Queensland [E1]
DRO entry for this publication

Lim, Yang-Choon, Kouzani, Abbas Z., Duan, Wei and Kaynak, Akif (2010) Effects of design parameters on sensitivity of microcantilever biosensors, in Li, Yan; Yang, Jiajia; Wen, Peng and Wu, Jinglong (eds), IEEE/ICME 2010 : Proceedings of the 2010 International Conference on Complex Medical Engineering, pp. 177-181, IEEE, Gold Coast, Queensland [E1]
DRO entry for this publication

Nasierding, Gulisong*, Kouzani, Abbas Z. and Tsoumakas, Grigorios* (2010) A triple-random ensemble classification method for mining multi-label data, in Fan, Wei; Hsu, Wynne; Webb, Geoffrey I.; Liu, Bing; Zhang, Chengqi; Gunopulos, Dimitrios and Wu, Xindong (eds), ICDMW 2010 : Proceedings of 10th IEEE International Conference on Data Mining Workshops, pp. 49-56, IEEE Computer Society, Sydney, NSW [E1]
DRO entry for this publication

Nasierding, Gulisong* and Kouzani, Abbas Z. (2010) Empirical study of multi-label classification methods for image annotation and retrieval, in Unknown (ed.), DICTA 2010 : Proceedings of the Digital Image Computing : Techniques and Application, pp. 617-622, DICTA, Sydney, NSW [E1]
DRO entry for this publication

Natgunanathan, Iynkaran and Xiang, Yong (2010) A novel bipolar time-spread echo hiding based watermarking method for stereo audio signals, in Unknown (ed.), ICSPCS 2010 : Proceedings of the 4th International Conference on Signal Processing and Communication Systems, pp. 1-7, IEEE, United States [E1]
DRO entry for this publication

Rana, M. M.*, Islam, Md. Saiful and Kouzani, Abbas Z. (2010) Peak to average power ratio analysis for LTE systems, in Wen, Desheng; Wang, Ruofeng and Zhou, Jianhong (eds), ICSNN 2010 : Proceedings of the Second International Conference on Communication Software and Networks, pp. 516-520, IEEE Computer Society Press, Singapore [E1]
DRO entry for this publication

Rana, Md. Masud* and Kouzani, Abbas Z. (2010) Channel estimation scheme for 3.9G wireless communication systems using RLS algorithm, in Ko, Franz and Na, Yunji (eds), IMS 2010 : Proceedings of the 6th International conference on Advanced Information Management and Service, pp. 494-497, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Rana, Md. Masud*, Kouzani, Abbas Z. and Islam, Md. Saiful (2010) PAPR reduction technique for LTE OFDMA systems, in Unknown (ed.), ICFIT 2010 : Proceedings of the 2010 International Conference on Future Information Technology, pp. V2-74-V2-77, Institute of Electrical and Electronics Engineers, Inc., Chengdu, China [E1]
DRO entry for this publication

Shams-Zahraei, M. and Kouzani, A. Z. (2010) Power-cycle-library-based control strategy for plug-in hybrid electric vehicles, in Unknown (ed.), IEEE VPPC 2010 : Proceedings of the 2010 IEEE Vehicle Power and Propulsion Conference : Clean Tech for Transportation, pp. 1-6, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Sudharsan, R., Rolfe, B. F. and Hodgson, P. D. (2010) Modelling the side impact of carbon fiber tubes, in Khalili, Nasser; Valliappan, Somasundaram; Li, Qing and Russell, Adrian (eds), Proceedings of the joint 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, 19-23 July, Sydney, New South Wales, pp. 1-10, IOP Publishing Ltd, Bristol, United Kingdom [E1]
DRO entry for this publication

Udawatta, Lanka*, Fernando, Shehan* and Pathirana, Pubudu N. (2010) Knowledge on road information in sub-urban lane detection via multiple cue integration, in Unknown (ed.), ICT and KE 2010 : Proceedings of the 8th International Conference on ICT and Knowledge Engineering, pp. 64-69, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Wang, Jin, She, Mary, Nahavandi, Saeid and Kouzani, Abbas (2010) A review of vision-based gait recognition methods for human identification, in Zhang, Jian; Shen, Chunhua; Geers, Glenn and Wu, Qiang (eds), DICTA 2010 : Proceedings of the Digital Image Computing : Techniques and Application, pp. 320-327, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Wang, Xiumei*, Yang, Chunhui and Rolfe, Bernard (2010) Numerical simulations on warm forming of stainless steel with trip-effect, in Barlat, Frederic; Moon, Young Hoon and Lee, Myoung-Gyu (eds), NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, pp. 595-601, American Institute of Physics (API), Danvers, Ma. [E1]
DRO entry for this publication

Weiss, Matthias, Ryan, Will, Rolfe, Bernard and Yang, Chunhui (2010) The effect of skin passing on the material behavior of metal strip in pure bending and tension, in Barlat, Frederic; Moon, Young Hoon and Lee, Myoung-Gyu (eds), NUMIFORM 2010 : Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, pp. 896-902, American Institute of Physics (API), Danvers, Ma. [E1]
DRO entry for this publication

Yilmaz, Ferdi, Hessami, Mir-Akbar*, Kouzani, Abbas and Hu, Eric* (2010) Incorporation of a hybrid cooling system in water cooled power stations to reduce water and energy consumptions, in Unknown (ed.), IEESE-5 2010 : Proceedings of the 5th International Ege Energy Symposium and Exhibition, pp. 1-8, Pamaukkale University, Denizli, Turkey [E1]
DRO entry for this publication

Devadas, R.*, Jones, S. D.*, Fitzgerald, G. J.*, McCauley, I.*, Matthews, B. A.*, Perry, E. M.*, Watt, Michelle*, Ferwerda, J. G.* and Kouzani, A. Z. (2010) Wireless sensor networks for in-situ image validation for water and nutrient management, in Wagner, W. and Székely, B. (eds), ISPRS 2010 : Proceedings of ISPRS Technical Commission VII Symposium, pp. 187-192, Institute of Photogrammetry and Remote Sensing, Vienna University of Technology, Amsterdam, The Netherlands [E2]
DRO entry for this publication

Duke, Michael*, Anderson, Timothy, Carson, James*, Kunnemeyer, Rainer* and Smith, Bram* (2010) Performance of building integrated solar hot water systems, Energy in the city – securing the future : Proceedings of the 2010 Solar Energy Society Conference, pp. 1-5, The Conference, London, England [E2]
DRO entry for this publication

Will, Frank (2010) "Tomorrow's car" : Deakin Universities new cross vehicle that combines the best of 2 worlds, in Unknown (ed.), FISITA 2010 : Proceedings of the 2010 World Automotive Congress, pp. 1-18, FISITA, London, England [E2.1]
DRO entry for this publication

Will, Frank (2010) A novel exhaust heat recovery system to reduce fuel consumption, in unknown (ed.), FISITA 2010 : Proceedings of the 2010 World Automotive Congress, pp. 1-10, FISITA, London, England [E2.1]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) CHASSIS FOR PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, Other international (5) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) BODY FOR PNEUMATIC VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) PNEUMATIC POWERTRAIN FOR AN AUTOMOTIVE VEHICLE, Pneumatic vehicle, UNIV DEAKIN, United States (2) [I]
DRO entry for this publication

Rolfe, Bernard Frank, De Souza, Timothy Ian, Pitts, Gregory Ryan, Hanafin, Stuart James McFarlane, Agius, Steven Lewis Anthony, Adamson, Benjamin Paul, Pereira, Michael Pio Gordon, Black, Timothy John, Hurren, Christopher James and Miller, Noel Egan (2010) Pneumatic vehicle, Pneumatic vehicle, UNIV DEAKIN, Australia (1) [I]
DRO entry for this publication

Najdovski, Zoran, Horan, Ben, Bhatti, Asim and Nahavandi, Saeid (2010) Method and apparatus for haptic control, Method and apparatus for haptic control, Deakin University, United States (2) [I.1]
DRO entry for this publication

Will, Frank (2010) Verfahren zur Herstellung eines Verbrennungsmotors, Method for producing an internal combustion engine, Ford Global Tech LLC [US], Europe (EPO only) (3) [I.1]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2010

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

2010 - Doctor of Philosophy

Matthew Joordens. Supervisor: Hieu Trinh
Thesis entitled: Autonomous Underwater Vehicles in a Hazardous non-Deterministic Environment .

Hamid Khayyam. Supervisor: Abbas Z. Kouzani
Thesis entitled: Adaptive Intelligent Systems in Energy Management of Vehicles.

Khashayar Khoshmanesh. Supervisor: Abbas Z. Kouzani
Thesis entitled: Novel Dielectrophoretic Platforms for Manipulation and Separation of Particles.

Gulisong Nasierding. Supervisor: Abbas Z. Kouzani
Thesis entitled: Image to Text Translation by Multi-label Classification.

Poh Sim Teh. Supervisor: Hieu Trinh
Thesis entitled: Robust Functional Estimation and Fault Diagnosis for Complex Uncertain Systems.

2010 - Master of Engineering

Ferdi Yilmaz. Supervisor: Abbas Z. Kouzani
Thesis entitled: Hybrid Cooling System for Water Conservation in Conventional Power Stations.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Monday 24th November 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010