Research Services Division

Deakin Research

2011 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Yilmaz, Ferdi, Hessami, Mir-Akbar*, Kouzani, Abbas and Hu, Eric* (2011) Power plant cooling technologies : hybrid cooling systems can save water, Chargan My Book Publisher, Perth, W. A. [A1.1]
DRO entry for this publication

Ganji, Behnam and Kouzani, Abbas Z. (2011) A look-ahead road grade determination method for HEVs, in Zhu, Min (eds), Electrical engineering and control, pp. 703-711, Springer, Berlin, Germany [B1]
DRO entry for this publication

Kouzani, Abbas Z., Tye, Sussanah, Walder, Ken and Kong, Lingxue (2011) A head mountable deep brain stimulation device for laboratory animals, in Wu, Yanwen (eds), Advances in computer, communication, control and automation, pp. 275-280, Springer-Verlag, Berlin, Germany [B1]
DRO entry for this publication

Man, Zhihong*, Khoo, Suiyang, Yu, Xinghuo*, Miao, Chunyan*, Jin, Jiong* and Tay, Feisiang* (2011) A new design of sliding mode control systems, in Fridman, Leonid; Iriarte, Rafael and Moreno, Jaime (eds), Sliding modes after the first decade of the 21st century : state of the art, pp. 151-167, Springer, Berlin, Germany [B1]
DRO entry for this publication

Shafighy, M., Khoo, S.Y. and Kouzani, A.Z. (2011) Energy efficiency methods in electrified railways based on recovery of regenerated power, in Zhu, Min (eds), Electrical engineering and control : selected papers from the 2011 International Conference on Electric and Electronics (EEIC 2011) in Nanchang,China on June 20-22, 2011, volume 2, pp. 69-77, Springer, Berlin, Germany [B1]
DRO entry for this publication

Yaghoubi, Mohammad, Ganji, Behnam and Kouzani, Abbas Z. (2011) Design and analysis of a fuzzy controller for a servo system, in Wu, Yanwen (eds), Advances in computer, communication, control and automation, pp. 267-273, Springer-Verlag, Berlin, Germany [B1]
DRO entry for this publication

Baig, Mirza Mansoor*, GholamHosseini, Hamid*, Kouzani, Abbas and Harrison, Michael J.* (2011) Anaesthesia monitoring using fuzzy logic, Journal of clinical monitoring and computing, vol. 25, no. 5, pp. 339-347, Springer, Amsterdam, The Netherlands [C1]
ERA journal ID: 16338 – Scopus EID: 2-s2.0-83155181449
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Dosthosseini, R.*, Kouzani, A. Z. and Sheikholeslam, F.* (2011) Direct method for optimal power management in hybrid electric vehicles, International journal of automotive technology, vol. 12, no. 6, pp. 943-950, Springer, Amsterdam, Netherlands [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Fisher, Ian*, Kastl, George*, Sathasivan, Arumugam* and Jegatheesan, Veeriah (2011) Suitability of chlorine bulk decay models for planning and management of water distribution systems, Critical reviews in environmental science and technology, vol. 41, no. 20, pp. 1843-1882, Taylor & Francis Inc., Philadelphia, Pa. [C1]
ERA journal ID: 4669 – Scopus EID: 2-s2.0-80051728304
Citation counts: Scopus - 5, Thomson - 3
DRO entry for this publication

Ganji, Behnam, Kouzani, Abbas Z. and Hessami, Mir-Akbar* (2011) Backward modelling and look-ahead fuzzy energy management controller for a parallel hybrid vehicle, Control and intelligent systems, vol. 39, no. 3, pp. 179-189, ACTA Press, Calgary, Canada [C1]
ERA journal ID: 4405 – Scopus EID: 2-s2.0-79960619814
Citation counts: Scopus - 4
DRO entry for this publication

Handapangoda, Chintha C., Pathirana, Pubudu N. and Premaratne, Malin* (2011) Eigen decomposition solution to the one-dimensional time-dependent photon transport equation, Optics express, vol. 19, no. 4, pp. 2922-2927, Optical Society of America, Washington, D. C. [C1]
ERA journal ID: 1277 – Scopus EID: 2-s2.0-79951650647
DRO entry for this publication

Handapangoda, C. C., Premaratne, M.* and Pathirana, P. N. (2011) Plane wave scattering by a spherical di-electric particle in motion : a relativistic extension of the Mie theory, Electromagnetic waves, vol. 112, pp. 349-379, Electromagnetics Academy, Cambridge, Ma. [C1]
ERA journal ID: 41527 – Scopus EID: 2-s2.0-79551619338
Citation counts: Scopus - 8
DRO entry for this publication

Hemmerich, E., Rolfe, B., Hodgson, P. D. and Weiss, M. (2011) The effect of pre-strain on the material behaviour and the Bauschinger effect in the bending of hot rolled and aged steel, Materials science and engineering a, vol. 528, no. 9, pp. 3302-3309, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79951682388
Citation counts: Scopus - 6
DRO entry for this publication

Islam, Md. Saiful, Kouzani, Abbas Z., Dai, Xiujuan J. and Michalski, Wojtek P.* (2011) Investigation of the effects of design parameters on sensitivity of surface plasmon resonance biosensors, Biomedical signal processing and control, vol. 6, no. 2, pp. 147-156, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3391 – Scopus EID: 2-s2.0-79952697060
Citation counts: Scopus - 6, Thomson - 2
DRO entry for this publication

Islam, Md. Saiful, Kouzani, Abbas Z., Dai, Xiujuan J. and Michalski, Wojtek P.* (2011) Modeling and comparative analysis of carbon nanotube and boron nitride nanotube cantilever biosensors, Advanced materials research, vol. 159, pp. 650-655, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-79953754568
Citation counts: Scopus - 1
DRO entry for this publication

Jennings, Les S.*, Fernando, Tyrone Lucius* and Trinh, Hieu Minh (2011) Existence conditions for functional observability from an eigenspace perspective, IEEE transactions on automatic control, vol. 56, no. 12, pp. 2957-2961, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 3596 – Scopus EID: 2-s2.0-79952741327
Citation counts: Scopus - 8, Thomson - 3
DRO entry for this publication

Joordens, Matthew A. and Jamshidi, Mo* (2011) Design of a prototype underwater research platform for swarm robotics, Intelligent Automation and Soft Computing, vol. 17, no. 2, pp. 111-132, AutoSoft Press, Albuquerque, N.M [C1]
ERA journal ID: 32062 – Scopus EID: 2-s2.0-84855318409
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Kashef, Sadaf, Asgari, Alireza, Hilditch, Timothy B., Yan, Wenyi*, Goel, Vijay K.* and Hodgson, Peter D. (2011) Fatigue crack growth behavior of titanium foams for medical applications, Materials science and engineering a, vol. 528, no. 3, pp. 1602-1607, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-78650175263
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Kaynak, Akif, Yang, Chunhui, Lim, Yang C. and Kouzani, Abbas (2011) Electrochemical fabrication and modelling of mechanical behavior of a tri-layer polymer actuator, Materials chemistry and physics, vol. 125, no. 1-2, pp. 113-117, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4965 – Scopus EID: 2-s2.0-78049244451
Citation counts: Scopus - 5, Thomson - 3
DRO entry for this publication

Kaynak, Akif and Foitzik, Richard* (2011) Methods of coating textiles with soluble conducting polymers, Research journal of textile and apparel, vol. 15, no. 2, pp. 107-113, Hong Kong Institution of Textile and Apparel, Hong Kong, Hong Kong [C1]
ERA journal ID: 3546 – Scopus EID: Not tagged
DRO entry for this publication

Khayyam, Hamid, Kouzani, Abbas Z., Hu, Eric J.* and Nahavandi, Saeid (2011) Coordinated energy management of vehicle air conditioning system, Applied thermal engineering, vol. 31, no. 5, pp. 750-764, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-79951511479
Citation counts: Scopus - 14, Thomson - 10
DRO entry for this publication

Khayyam, Hamid, Nahavandi, Saeid, Hu, Eric*, Kouzani, Abbas, Chonka, Ashley, Abawajy, Jemal, Marano, Vincenzo* and Davis, Sam* (2011) Intelligent energy management control of vehicle air conditioning via look-ahead system, Applied thermal engineering, vol. 31, no. 16, pp. 3147-3160, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-80052026261
Citation counts: Scopus - 11, Thomson - 7
DRO entry for this publication

Lan, Jinhui*, Xiang, Yong, Wang, Liping* and Shi, Yuqiao* (2011) Vehicle detection and classification by measuring and processing magnetic signal, Measurement, vol. 44, no. 1, pp. 174-180, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 650 – Scopus EID: 2-s2.0-78650034734
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Li, A. J., Merifield, R. S.* and Lyamin, A. V.* (2011) Effect of rock mass disturbance on the stability of rock slopes using the Hoek-Brown failure criterion, Computers and geotechnics, vol. 38, no. 4, pp. 546-558, Pergamon, Oxford , U. K. [C1]
ERA journal ID: 3466 – Scopus EID: 2-s2.0-79954816893
Citation counts: Scopus - 7, Thomson - 5
DRO entry for this publication

Ma, Lianhua*, Rolfe, Bernard F., Yang, Qingsheng* and Yang, Chunhui (2011) The configuration evolution and macroscopic elasticity of fluid-filled closed cell composites : micromechanics and multiscale homogenization modelling, Computer modeling in engineering and sciences, vol. 79, no. 2, pp. 131-158, Tech Science Press, Palmdale, Calif. [C1]
ERA journal ID: 3460 – Scopus EID: 2-s2.0-82055199178
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Muthukumaran, Shobha, Nguyen, Duy Anh and Baskaran, Kanagaratnam (2011) Performance evaluation of different ultrafiltration membranes for the reclamation and reuse of secondary effluent, Desalination, vol. 279, no. 1-3, pp. 383-389, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3874 – Scopus EID: 2-s2.0-80052368809
Citation counts: Scopus - 12, Thomson - 12
DRO entry for this publication

Muthukumaran, Shobha, Baskaran, Kanagaratnam and Sexton, Nicole* (2011) Quantification of potable water savings by residential water conservation and reuse : A case study, Resources, conservation and recycling, vol. 55, no. 11, pp. 945-952, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 5889 – Scopus EID: 2-s2.0-79960948517
Citation counts: Scopus - 12, Thomson - 11
DRO entry for this publication

Nam, Phan T.* and Pathirana, Pubudu N. (2011) Further result on reachable set bounding for linear uncertain polytopic systems with interval time-varying delays, Automatica, vol. 47, no. 8, pp. 1838-1841, Pergamon, Oxford , U. K. [C1]
ERA journal ID: 4400 – Scopus EID: 2-s2.0-79960906598
Citation counts: Scopus - 9, Thomson - 8
DRO entry for this publication

Palmer, Stuart, Holt, Dale, Hall, Wayne* and Ferguson, Clive (2011) An evaluation of an online student portfolio for the development of engineering graduate attributes, Computer applications in engineering education, vol. 19, no. 3, pp. 447-456, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 41159 – Scopus EID: 2-s2.0-80051538030
Citation counts: Scopus - 1
DRO entry for this publication

Pathirana, Pubudu N., Ekanayake, Samitha W. and Savkin, Andrey V.* (2011) Fusion based 3D tracking of mobile transmitters via robust set-valued state estimation with RSS measurements, IEEE communications letters, vol. 15, no. 5, pp. 554-556, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 5068 – Scopus EID: 2-s2.0-79956217911
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Pathirana, Pubudu N., Savkin, Andrey V.*, Ekanayake, Samitha W. and Bauer, Nicholas J. (2011) A robust solution to the stereo-vision-based simultaneous localization and mapping problem with steady and moving landmarks, Advanced robotics, vol. 25, no. 6-7, pp. 765-788, VSP, Leiden, Netherlands [C1]
ERA journal ID: 3585 – Scopus EID: 2-s2.0-79954559744
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Peng, Dezhong*, Xiang, Yong, Yi, Zhang* and Yu, Shui (2011) CM-based blind equalization of time-varying SIMO-FIR channel with single pulsation estimation, in Weihua, Zhuang (eds), IEEE transactions on vehicular technology, vol. 60, no. 5, pp. 2410-2415, IEEE, Piscataway, N. J [C1]
ERA journal ID: 5074 – Scopus EID: 2-s2.0-79959277621
Citation counts: Scopus - 8, Thomson - 4
DRO entry for this publication

Rong, Yue* and Xiang, Yong (2011) Multiuser multi-hop MIMO relay systems with correlated fading channels, IEEE transactions on wireless communications, vol. 10, no. 9, pp. 2835-2840, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 4466 – Scopus EID: 2-s2.0-80052919662
Citation counts: Scopus - 8, Thomson - 6
DRO entry for this publication

Shams-Zahraei, Mojtaba, Kouzani, Abbas Z. and Ganji, Behnam (2011) Effect of noise factors in energy management of series plug-in hybrid electric vehicles, International review of electrical Engineering, vol. 6, no. 4, pp. 1715-1726, Praise Worthy Prize, Napoli, Italy [C1]
ERA journal ID: 4590 – Scopus EID: 2-s2.0-82455208760
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Shuib, N., Baskaran, K. and Jegatheesan, V. (2011) Evaluating the performance of horizontal subsurface flow constructed wetlands using natural zeolite (escott), International journal of environmental science and development, vol. 2, no. 4, pp. 311-315, International Association of Computer Science and Information Technology, Singapore, Singapore [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Shuib, N. and Baskaran K. (2011) Effects of different substrates and hydraulic retention time (HRT) on the removal of total nitrogen and organic matter in a sub-surface horizontal flow constructed wetland, International journal of environmental, cultural, economic and social sustainability, vol. 7, no. 5, pp. 227-241, Common Ground, Altona, Vic. [C1]
ERA journal ID: 36441 – Scopus EID: 2-s2.0-84856987409
DRO entry for this publication

Weiss, M., Hemmerich, E.*, Hodgson, P. D. and Rolfe, B. (2011) Effect of thermal treatment on the bending properties of pre-strained carbon steel, Materials science and engineering A, vol. 528, no. 13-14, pp. 4528-4536, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-79953289595
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Will, Frank and Boretti, Alberto* (2011) A new method to warm up lubricating oil to improve the fuel efficiency during cold start, SAE international journal of engines, vol. 4, no. 1, pp. 175-187, S A E Inc., Warrendale, Pa. [C1]
ERA journal ID: 3550 – Scopus EID: 2-s2.0-79959536723
Citation counts: Scopus - 6
DRO entry for this publication

Will, Frank, Davidson, James Nicholas, Couchman, Paul and Bednall, David (2011) Tomorrow’s car – for today’s people : can tilting three wheeled vehicles be a solution for the problems of today and the future?, SAE international journal of engines, pp. 1-14, SAE International, Warrendale, Pa. [C1]
ERA journal ID: 3550 – Scopus EID: 2-s2.0-84877185590
DRO entry for this publication

Xiang, Yong, Peng, Dezhong, Natgunanathan, Iynkaran and Zhou, Wanlei (2011) Effective pseudonoise sequence and decoding function for imperceptibility and robustness enhancement in time-spread echo-based audio watermarking, IEEE transactions on multimedia, vol. 13, no. 1, pp. 2-13, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 17877 – Scopus EID: 2-s2.0-78951494890
Citation counts: Scopus - 17, Thomson - 8
DRO entry for this publication

Yan, David Ping*, Littlefair, Guy and Pasang, Tim* (2011) Study of phase transformation and work hardening phenomenon during drilling of Ti-5553 and Ti-64, International journal of machining and machinability of materials, vol. 10, no. 4, pp. 264-279, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 41265 – Scopus EID: 2-s2.0-80054116299
DRO entry for this publication

Yang, K.-H.*, Yuan, R.-Y.*, Xiang, Y. and Yu, W.-S.* (2011) Real solutions number of the switching angles in the selective harmonic eliminated PWM, Journal of China University of Mining and Technology, vol. 40, no. 5, pp. 766-773, Zhongguo Kuangye Daxue, Xuzhou Shi, China [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Yang, Yongping*, Yan, Qin*, Zhai, Rongrong*, Kouzani, Abbas and Hu, Eric* (2011) An efficient way to use medium-or-low temperature solar heat for power generation - integration into conventional power plant, Applied thermal engineering, vol. 31, no. 2-3, pp. 157-162, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-78049433342
Citation counts: Scopus - 24, Thomson - 9
DRO entry for this publication

Yin, Juliang*, Khoo, Suiyang, Man, Zhihong* and Yu, Xinghuo* (2011) Finite-time stability and instability of stochastic nonlinear systems, Automatica, vol. 47, no. 12, pp. 2671-2677, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 4400 – Scopus EID: 2-s2.0-81155139623
Citation counts: Scopus - 37
DRO entry for this publication

Zhang, Huan* and Pathirana, Pubudu N. (2011) Optimization-based formation of autonomous mobile robots, Robotica, vol. 29, no. 4, pp. 515-525, Cambridge University Press, Cambridge, U. K. [C1]
ERA journal ID: 3624 – Scopus EID: 2-s2.0-79958807468
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Pasang, T.*, Sabol, J. C.*, Misiolek, W. Z.*, Mitchell, R. M.*, Short, A. B.*, Littlefair, G. and Thome, A. J.* (2011) Metallurgical characterization of deformed electron beam welded dissimilar titanium alloys, Steel research international, no. Special ed., pp. 657-661, Wiley – VCH Verlag GmbH & Co. KGaA, Germany [C1.1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yin, Juliang* and Khoo, Suiyang (2011) Comments on "finite-time stability theorem of stochastic nonlinear systems" [Automatica 46 (2010) 2105-2108], Automatica, vol. 47, no. 7, pp. 1542-1543, Pergamon, Oxford, U. K. [C4]
ERA journal ID: 4400 – Scopus EID: Not tagged
DRO entry for this publication

Al-Ameri, Riyadh (2011) Interface slip control for CFRP-concrete composite beams, in Unknown (ed.), Concrete 2011 : Proceedings of the 25th Biennial Conference of the Concrete Institute of Australia : Building a Sustainable Future, pp. 1-10, Concrete Institute of Australia, Perth, W. A. [E1]
DRO entry for this publication

Anderson, Timothy*, Luther, Mark and Brain, Tim (2011) Assessment of thermal comfort near a glazed exterior wall, in Hyde, R.; Hayman, S. and Cabrera D. (eds), ANZAScA 2011 : From principles to practice in architectural science: Proceedings of the 45th Annual conference of the Australian and New Zealand Architectural Science Association, pp. 1-10, ANZAScA, Sydney, N. S. W. [E1]
DRO entry for this publication

Das, Subrat, Morsi, Yos* and Brooks, Geoffrey* (2011) Analysis of the current distribution in an aluminum electrolysis cell with copper collector-bar cathode assembly, in Welch, Barry; Stephens, Gretta; Metson, Jim and Skyllas‐Kazacos, Maria (eds), Proceedings of the 10th Australasian Aluminium Smelting Technology Conference, pp. 1-14, University of New South Wales, Launceston, Tas. [E1]
DRO entry for this publication

Fernando, T. L.*, Jennings, L. S.* and Trinh, H. M. (2011) Generality of functional observer structures, in Unknown (ed.), CDC - ECC 2011 : Proceedings of the Conference on Decision and Control and European Control Conference, pp. 4000-4004, IEEE, Orlando, Fla. [E1]
DRO entry for this publication

Ganji, Behnam, Kouzani, Abbas Z. and Khayyam, Hamid (2011) Look-ahead intelligent energy management of a parallel hybrid electric vehicle, in Unknown (ed.), FUZZ 2011 : Proceedings of the IEEE 2011 International Conference on Fuzzy Systems, pp. 2335-2341, IEEE, Taipei, Taiwan [E1]
Citation counts: Scopus - 2
DRO entry for this publication

Hanafin, Stuart, Datta, Sambit and Rolfe, Bernard (2011) Tree façades : generative modelling with an axial branch rewriting system, in Herr, Christiane M.; Gu, Ning and Schnabel, Marc A. (eds), CAADRIA 2011 : Circuit Bending, Breaking and Mending : Proceedings of the 16th International Conference on Computer-Aided Architectural Design Research in Asia, pp. 175-184, Association for Computer-Aided Architectural Design in Asia, Hong Kong, China [E1]
DRO entry for this publication

Herath, Sanvidha C. K. and Pathirana, Pubudu N. (2011) Optimal sensor placement in linear arrays : part I - AoA based localization, in Nandagopal, D.; Palaniswami, M. and Gubbi, J. (eds), ISSNIP 2011 : Proceedings of the 7th International Conference on Intelligent Sensors, Sensor Networks and Information Processing, pp. 277-281, IEEE, Adelaide, S. Aust. [E1]
DRO entry for this publication

Hosain, Md. Kamal, Kouzani, Abbas Z., Kaynak, Akif and Lefevre, Christophe (2011) Electromagnetic field and other physical methods influencing cell growth in mammal cell culture systems, in Unknown (ed.), ASEMD 2011 : Proceedings of International Conference on Applied Superconductivity and Electromagnetic Devices, pp. 150-153, IEEE, Piscataway, N. J [E1]
DRO entry for this publication

Islam, Md. Saiful and Kouzani, Abbas Z. (2011) Variable incidence angle localized surface plasmon resonance graphene biosensor, in Unknown (ed.), CME 2011 : Proceedings of the 2011 IEEE/ICME International Conference on Complex Medical Engineering, pp. 58-63, IEEE, Harbin Heilongjiang, China [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Islam, Md. Saiful and Kouzani, Abbas Z. (2011) Design of a high sensitive double-gate field-effect transistor biosensor for DNA detection, in Unknown (ed.), EMBC 2011 : Proceedings of the 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 4788-4791, IEEE, Boston, Mass. [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Islam, Md. Saiful and Kouzani, Abbas (2011) Design and modelling of a double gate bilayer graphene field effect transistor, in unknown (ed.), APMC 2011 : Asia-Pacific Microwave Conference Proceedings, pp. 343-346, IEEE, Melbourne, Vic. [E1]
DRO entry for this publication

Islam, Md. Saiful, Kouzani, Abbas Z., Dai, Xiujuan J., Michalski, Wojtek P.* and Gholamhosseini, H.* (2011) Comparison of performance parameters for conventional and localized surface plasmon resonance graphene biosensors, in Unknown (ed.), EMBC 2011 : Proceedings of the 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 1851-1854, IEEE, Boston, Mass. [E1]
DRO entry for this publication

Khoo, Suiyang, Yin, Juliang*, Wang, Bin*, Zhao, Shengkui* and Man, Zhihong* (2011) Adaptive data based neural network leader-follower control of multi-agent networks, in unknown (ed.), IECON 2011 : Proceedings of the 37th Annual Conference on IEEE Industrial Electronics Society, pp. 3924-3929, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Li, A. J. and Merifield, R. S.* (2011) Limit analysis solutions for very gentle undrained slopes, in Unknown (ed.), ISSMGE 2011 : Soil mechanics and geotechnical engineering : challenges and solutions : Proceedings of the 14th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, pp. 1-6, Hong Kong Geotechnical Society, Hong Kong [E1]
DRO entry for this publication

Li, A. J., Cassidy, M. J.* and Lyamin, A. V.* (2011) Rock slope risk analysis based on non-linear failure criterion, in Zhou, Yingxin (eds), ISRM 2011 : Proceedings of the 12th International Congress on Rock Mechanics, pp. 714-717, CRC Press, London, England [E1]
DRO entry for this publication

Li, A. J. and Merifield, R.S* (2011) Comparisons between two empirical yield criteria for rock masses, in Zhou, Yingxin (eds), ISRM 2011 : Proceedings of the 12th International Congress on Rock Mechanics, pp. 190-193, CRC Press, London, England [E1]
DRO entry for this publication

Lim, Yang Choon, Kouzani, Abbas, Kaynak, Akif, Al-Ameri, Riyadh and Duan, Wei (2011) A micromechanical biosensor with interdigitated capacitor readout, in Unknown (ed.), CME 2011 : Proceedings of the 2011 IEEE/ICME International Conference on Complex Medical Engineering, pp. 42-46, IEEE, Harbin Heilongjiang, China [E1]
DRO entry for this publication

Luther, Mark, Anderson, Timothy* and Brain, Tim (2011) Investigating glazing system simulated results with real measurements, in Unknown (ed.), Proceedings of Building Simulation 2011, pp. 1592-1598, Australian Institute of Refrigeration, Air Conditioning and Heating (AIRAH), Sydney, N. S. W. [E1]
DRO entry for this publication

Man, Zhihong*, Khoo, Suiyang, Yu, Xinghuo* and Jin, Jiong* (2011) A new sliding mode-based learning control scheme, in unknown (ed.), ICIEA 2011 : Proceedings of the 2011 6th IEEE Conference on Industrial Electronics and Applications, pp. 1906-1911, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Mortazavi, Daryoush, Kouzani, Abbas Z., Kaynak, Akif and Duan, Wei (2011) Nano-plasmonic biosensors : a review, in Unknown (ed.), CME 2011 : Proceedings of the 2011 IEEE/ICME International Conference on Complex Medical Engineering, pp. 31-36, IEEE, Harbin Heilongjiang, China [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Natgunanathan, Iynkaran and Xiang, Yong (2011) Echo hiding based stereo audio watermarking against pitch-scaling attacks, in Unknown (ed.), SIN 2011 : Proceedings of the 4th international conference on Security of information and networks, pp. 37-42, ACM, New York, N. Y. [E1]
DRO entry for this publication

Okonkwo, Paul C., Pereira, Michael P., Kelly, Georgina and Rolfe, Bernard F. (2011) Effects of temperature in relation to sheet metal stamping, in Mastorakis, Nikos; Mladenov, Valeri; Lepadatescu, Badea; Karimi, Hamid Reza and Helmis, Costas G. (eds), MEQAPS 2011 : Proceedings of the 4th International Conference on Manufacturing Engineering, Quality and Production Systems, pp. 114-118, World Scientific and Engineering Academy and Society (WSEAS), Barcelona, Spain [E1]
DRO entry for this publication

Pathirana, Pubudu N., Herath, Sanvidha C. K. and Savkin, Andrey V.* (2011) Mobile agent tracking with single frequency continuous wave radar : a linear robust filtering based approach, in Unknown (ed.), IFAC 2011 : Proceedings of the 18th IFAC World Congress, pp. 9990-9995, International Federation of Automatic Control, Milano, Italy [E1]
DRO entry for this publication

Rana, Md. Masud*, Islam, Md. Rabiul*, Hosain, Md. Kamal and Kouzani, Abbas (2011) Parametric investigation and measurement of near end and far end crosstalk in multiconductor microstrip transmission lines, in Unknown (ed.), ASEMD 2011 : Proceedings of International Conference on Applied Superconductivity and Electromagnetic Devices, pp. 220-223, IEEE, Piscataway, N. J. [E1]
DRO entry for this publication

Schiretz, Helmut F. and Kouzani, Abbas Z. (2011) Modeling and simulation of a periodic grating coupled configuration for surface plasmon excitation, in Unknown (ed.), CME 2011 : Proceedings of the 2011 IEEE/ICME International Conference on Complex Medical Engineering, pp. 53-57, IEEE, Harbin Heilongjiang, China [E1]
Citation counts: Scopus - 2
DRO entry for this publication

Shen, Weixiang*, Choo, Fook Hoong*, Wang, Peng*, Loh, Poh Chiang* and Khoo, Suiyang (2011) Development of a mathematical model for solar module in photovoltaic systems, in unknown (ed.), ICIEA 2011 : Proceedings of the 2011 6th IEEE Conference on Industrial Electronics and Applications, pp. 2056-2061, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Wang, Jin, Liu, Ping*, She, Mary F. H., Kouzani, Abbas and Nahavandi, Saeid (2011) Human action recognition based on pyramid histogram of oriented gradients, in Unknown (ed.), SMC 2011 : Conference proceeding of the 2011 International Conference on Systems, Man, and Cybernetics, pp. 2449-2454, IEEE, Piscataway, N. J. [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Wang, Ying, Khoo, Sui Yang and Li, An-Jui (2011) Damage identification of civil infrastructure in the time domain using FEM calibrated ARMAX model, in unknown (ed.), APVC 2011 : Proceedings of the14th Asia Pacific Vibration Conference, pp. 203-212, Hong Kong Polytechnic University. Department of Civil and Structural Engineering and Department of Mechanical Engineering, Hong Kong, China [E1]
DRO entry for this publication

Yin, Juliang*, Khoo, Suiyang and Man, Zhihong* (2011) A finite-time stability theorem of stochastic nonlinear systems and stabilization designs, in unknown (ed.), ICIEA 2011 : Proceedings of the 2011 6th IEEE Conference on Industrial Electronics and Applications, pp. 1288-1292, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Zhang, Huan* and Pathirana, Pubudu N. (2011) Formation control of weak autonomous robots, in Unknown (ed.), CDC - ECC 2011 : Proceedings of the Conference on Decision and Control and European Control Conference, pp. 4220-4225, IEEE, Orlando, Fla [E1]
DRO entry for this publication

Hinton, B., Varela, F., Hill, J., Markley, T.*, Forsyth, M., Birbilis, N.* and Howlett, P. (2011) The corrosion inhibition of aluminium alloy 7075-T651 with cerium and Mischmetal di phenyl phosphate, in Unknown (ed.), ICC 2011 : Corrosion control, contributing to a sustainable future for all : Proceedings of the 18th International Corrosion Congress, pp. 1787-1795, International Corrosion Congress, Perth, W.A. [E1.1]
DRO entry for this publication

Kipli, Kuryati, Kouzani, Abbas Z., Xiang, Yong and Joordens, Matthew (2011) Evaluation of segmentation algorithms for extraction of RNFL in OCT images, in Unknown (ed.), ICIS 2011 : Proceedings of the IEEE International Conference on Intelligent Computing and Intelligent Systems, pp. 447-451, IEEE, Piscataway, N.J. [E1.1]
DRO entry for this publication

Navaratna, D., Shu, L., Baskaran, K. and Jegatheesan, V. (2011) Application of a hybrid MBR system to treat herbicides from agricultural runoffs, in Unknown (ed.), AGRO 2011 : Proceedings of the 8th International IWA Symposium on Waste Management Problems in Agro-Industries, pp. 235-242, IWA, Izmir, Turkey [E2]
DRO entry for this publication

Pandey, S. R., Jegatheesan, V., Baskaran, K. and Muthukumaran, S.* (2011) Ranking of pre-treatment technologies for reverse osmosis for water recovery, in Unknown (ed.), AGRO 2011 : Proceedings of the 8th International IWA Symposium on Waste Management Problems in Agro-Industries, pp. 463-470, IWA, Izmir, Turkey [E2]
DRO entry for this publication

Shuib, N., Baskaran, K., Jegatheesan, V. and Muthukumaran, S.* (2011) Evaluating the performance of different media in a horizontal subsurface flow constructed wetland, in Unknown (ed.), AGRO 2011 : Proceedings of the 8th International IWA Symposium on Waste Management Problems in Agro-Industries, pp. 345-352, IWA, Izmir, Turkey [E2]
DRO entry for this publication

Supasuthakul, Jeerachai, Hodgson, Peter D. and Yang, Chunhui (2011) Analytic study on pure bending of metal sheets, in Unknown (ed.), NUMISHEET 2011 : American Institute of Physics Conference Proceedings, pp. 541-548, American Institute of Physics [E2]
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Yang, Chunhui, De Souza, Tim and Hodgson, Peter (2011) Review of approximate analyses of sheet forming processes, in Unknown (ed.), NUMISHEET 2011 : American Institute of Physics Conference Proceedings, pp. 986-996, American Institute of Physics, Seoul, Korea [E2]
DRO entry for this publication

Yan, David P.*, Littlefair, Guy and Pasang, Tim* (2011) Deformation induced phase transformation during machining of Ti-5553, in Unknown (ed.), TMS 2011 : Supplemental Proceedings Vol 2 : Materials Fabrication, Properties, Characterization, and Modeling, pp. 633-640, John Wiley & Sons, Hoboken N. J. [E2]
DRO entry for this publication

Chirgwin, Richard* and Will, Frank (Contibutor) (2011) Deakin Uni promises safe three-wheeler : Not your reliant robin, in Will, Frank (eds), The Register, p. 1, The Register, Geelong, Vic. [M.1]
DRO entry for this publication

Duff, Craig* and Will, Frank (Contibutor) (2011) Deakin designing micro car, in Will, Frank (eds), Herald Sun, pp. 1-11, Nationwide News, Melbourne, Vic. [M.1]
DRO entry for this publication

Fincham, Chris* and Will, Frank (Contibutor) (2011) Deakin's tomorrow's car, in Will, Frank (eds), Carsales.com.au, p. 1, Carsales.com.au, Melbourne, Vic. [M.1]
DRO entry for this publication

Funnell, Antony* and Will, Frank (Guest) (2011) Tomorrow's car, in Will, Frank (eds), ABC Radio, Australian Broadcasting Corporation, Melbourne, Vic. [M.1]
DRO entry for this publication

Jones, Cheryl* and Will, Frank (Contibutor) (2011) A driving force for efficiency - Backyard hero - The Australian Innovation Challenge, in Will, Frank (eds), The Australian, p. 14, Nationwide News, Canberra, A.C.T. [M.1]
DRO entry for this publication

Martin, Terry* and Will, Frank (Contibutor) (2011) Over7 on the mark : Deakin Uni team wins top award, signs major deal, in Will, Frank (eds), Go auto news, p. 8, John Mellor Pty Ltd., Melbourne, Vic. [M.1]
DRO entry for this publication

Will, Frank (2011) Waste heat slashes fuel consumption, Phys.Org, p. 1, Phys.Org, Unknown [M.1]
DRO entry for this publication

Will, Frank (2011) Victorian Engineering Excellence Awards 2011 - Advertising features, in Will, Frank (eds), The Age, p. 1, Fairfax, Melbourne, Vic. [M.1]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2011

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Friday 22nd August 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010