Research Services Division

Deakin Research

2012 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Trinh, Hieu and Fernando, Tyrone* (2012) Functional observers for dynamical systems, in Thoma, M.; Allgöwer, F. and Morari, M. (eds), Springer, Berlin, Germany [A1]
DRO entry for this publication

Al-Ameri, Riyadh (2012) Reinforced concrete structures, in Al-Ameri, Riyadh (eds), Pearson Education, Sydney, N. S. W. [A7]
DRO entry for this publication

Asgari, Alireza and Moresi, Louis* (2012) Multiscale particle-in-cell method : from fluid to solid mechanics, in Jones, Steven A. (eds), Advanced methods for practical applications in fluid mechanics, pp. 185-208, InTech, Rijeka, Croatia [B1]
DRO entry for this publication

Jegatheesan, V., Virkutyte, J.*, Shu, L., Allen, J.*, Wang, Y.*, Searston, E.*, Xu, Z. P.*, Naylor, J.*, Pinchon, S.*, Teil, C.*, Navaratna, D. and Shon, H. K.* (2012) Removal of lower-molecular-weight substances from water and wastewater : challenges and solutions, in Rao, D. G.; Senthikumar, R.; Anthony Byrne, J. and Feroz, S. (eds), Wastewater treatment : advanced processes and technologies, pp. 275-317, IWA Publishing, London, England [B1]
DRO entry for this publication

Kashef, Sadaf, Hilditch, Tim, Hodgson, Peter and Asgari, Alireza (2012) Fatigue crack propagation mechanism in open pore metal foams, in Tang, Ping and Zhang, Jim Leor (eds), Fatigue crack growth : mechanisms, behavior and analysis, pp. 191-209, Nova Science Publishers, New York, N.Y. [B1]
DRO entry for this publication

Shon, H. K.*, Phuntsho, S.*, Vigneswaran, S.*, Kandasamy, J.*, Aryal, R.* and Jegatheesan, V. (2012) Physical, chemical, and biological characterization of membrane fouling, in Zhang, R. Y.; Surampalli, S.; Vigneswaran, S.; Tyagi, R. D.; Ong, S. L. and Kao, C. M. (eds), Membrane technology and environmental applications, pp. 457-503, American Society of Civil Engineers (ASCE), Reston, Va. [B1]
DRO entry for this publication

Amini, Abbas, Beladi, Hossein, Hameed, Nishar and Will, Frank (2012) Effects of dynamic loading on nano-scale depth-recovery and damping property of single crystal CuAlNi shape memory alloy, Journal of alloys and compounds, vol. 545, pp. 222-224, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-84866153663
Citation counts: Scopus - 4
DRO entry for this publication

An, Yang, Wen, Cui'e*, Hodgson, Peter D. and Yang, Chunhui (2012) Investigation of cell shape effect on the mechanical behaviour of open-cell metal foams, Computational materials science, vol. 55, no. 5, pp. 1-9, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-84862812332
Citation counts: Scopus - 9
DRO entry for this publication

An, Yang, Wen, Cui'e*, Hodgson, Peter and Yang, Chunhui (2012) Impact response and energy absorption of aluminium foam-filled tubes, Applied mechanics and materials, vol. 152-154, pp. 436-439, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 124777 – Scopus EID: 2-s2.0-84857166187
DRO entry for this publication

Asgari, A., Yang, C.* and Rolfe, B.F. (2012) Modern enhancements in teaching design theories to mechanical engineering students, Australasian journal of engineering education, vol. 18, no. 1, pp. 25-34, Institution of Engineers Australia, Sydney, N.S.W. [C1]
ERA journal ID: 40310 – Scopus EID: Not tagged
DRO entry for this publication

Bafekrpour, Ehsan, Simon, George P.*, Yang, Chunhui, Habsuda, Jana*, Naebe, Minoo and Fox, Bronwyn (2012) Effect of compositional gradient on thermal behavior of synthetic graphite-phenolic nanocomposites, Journal of thermal analysis and calorimetry, vol. 109, no. 3, pp. 1169-1176, Springer, Berlin, Germany [C1]
ERA journal ID: 1477 – Scopus EID: 2-s2.0-84867396219
Citation counts: Thomson - 11
DRO entry for this publication

Bafekrpour, Ehsan, Simon, George P.*, Habsuda, Jana*, Naebe, Minoo, Yang, Chunhui and Fox, Bronwyn (2012) Fabrication and characterization of functionally graded synthetic graphite/phenolic nanocomposites, Materials science and engineering A, vol. 545, pp. 123-131, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84859720431
Citation counts: Scopus - 13, Thomson - 12
DRO entry for this publication

Das, Subrat (2012) Convection in fluid overlying porous layer : an application to Hall-Heroult cell, Materials performance and characterization, vol. 1, no. 1, pp. 1-22, ASTM International, Conshohocken, Pa. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Fabijanic, D. M. and Hilditch, T. B. (2012) Effect of carburising on geometrical control during quenching of martensitic sheet steel channels, Journal of materials processing technology, vol. 212, no. 8, pp. 1802-1809, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84860265464
DRO entry for this publication

Fernando, T. L.*, Phat, V. N.* and Trinh, H. M. (2012) Decentralized stabilization of large-scale systems with interval time-varying delays in interconnections, International journal of adaptive control and signal processing, vol. 26, no. 6, pp. 541-554, John Wiley & Sons, Chichester, England [C1]
ERA journal ID: 4472 – Scopus EID: 2-s2.0-84862848926
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Fernando, T.*, MacDougall, S.*, Sreeram, V.* and Trinh, H. (2012) Existence conditions for unknown input functional observers, International journal of control, vol. 86, no. 1, pp. 22-28, Taylor & Francis, Essex, England [C1]
ERA journal ID: 40346 – Scopus EID: 2-s2.0-84871404231
Citation counts: Scopus - 6, Thomson - 4
DRO entry for this publication

Ganji, Behnam and Kouzani, Abbas Z. (2012) Combined quasi-static backward modeling and look-ahead fuzzy control of vehicles, Expert systems with applications, vol. 39, no. 1, pp. 223-233, Pergamon, Oxford, U. K. [C1]
ERA journal ID: 17852 – Scopus EID: 2-s2.0-81855169994
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Hilditch, Timothy, Beladi, Hossein, Hodgson, Peter D. and Stanford, Nicole (2012) Role of microstructure in the low cycle fatigue of multi-phase steels, Materials science and engineering : A, vol. 534, pp. 288-296, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84856553502
Citation counts: Scopus - 12
DRO entry for this publication

Islam, Md.Saiful, Kouzani, Abbas Z., Dai, Xiujuan J., Michalski, Wojtek P.* and Gholamhosseini, Hamid* (2012) Design and analysis of a multilayer localized surface plasmon resonance graphene biosensor, Journal of biomedical nanotechnology, vol. 8, no. 3, pp. 380-393, American Scientific Publishers, Valencia, Calif. [C1]
ERA journal ID: 36588 – Scopus EID: 2-s2.0-84862284296
Citation counts: Scopus - 19, Thomson - 21
DRO entry for this publication

Jamal Khan, S.*, Zohaib-Ur-Rehman,*, Visvanathan, C.* and Jegatheesan, V. (2012) Influence of biofilm carriers on membrane fouling propensity in moving biofilm membrane bioreactor, Bioresource technology, vol. 113, pp. 161-164, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84860227595
Citation counts: Scopus - 10, Thomson - 6
DRO entry for this publication

Jamal Khan, S.*, Visvanathan, C.* and Jegatheesan, V. (2012) Effect of powdered activated carbon (PAC) and cationic polymer on biofouling mitigation in hybrid MBRs, Bioresource technology, vol. 113, pp. 165-168, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84860240205
Citation counts: Scopus - 9
DRO entry for this publication

Jegatheesan, Veeriah, Shu, Li, Phong, Diep Dinh*, Navaratna, Dimuth and Neilly, Adam* (2012) Clarification and concentration of sugar cane juice through ultra, nano and reverse osmosis membranes, Membrane water treatment, vol. 3, no. 2, pp. 99-111, Techno Press, Daejeon, Korea [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Jegatheesan, V., Shu, L., Keir, G. and Phong, D.D.* (2012) Evaluating membrane technology for clarification of sugarcane juice, Reviews in environmental science and biotechnology, vol. 11, no. 2, pp. 109-124, Springer, Amsterdam, The Netherlands [C1]
ERA journal ID: 4689 – Scopus EID: 2-s2.0-84861652530
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Keir, Greg and Jegatheesan, Veeriah (2012) Prediction of solute rejection and modelling of steady-state concentration polarisation effects in pressure-driven membrane filtration using computational fluid dynamics, Membrane water treatment, vol. 3, no. 2, pp. 77-98, Techno-Press, Daejeon, South Korea [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 3
DRO entry for this publication

Khayyam, Hamid, Abawajy, Jemal and Jazar, Reza N.* (2012) Intelligent energy management control of vehicle air conditioning system coupled with engine, Applied thermal engineering, vol. 48, pp. 211-224, Pergamon, Oxford, England [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-84862726178
Citation counts: Scopus - 3
DRO entry for this publication

Khayyam, Hamid, Nahavandi, Saeid and Davis, Sam* (2012) Adaptive cruise control look-ahead system for energy management of vehicles, Expert systems with applications, vol. 39, no. 3, pp. 3874-3885, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 17852 – Scopus EID: 2-s2.0-80255139276
Citation counts: Thomson - 12
DRO entry for this publication

Khoo, Suiyang, Zhao, Shengkui* and Man, Zhihong* (2012) Adaptive fast finite-time multiple-surface sliding control for a class of uncertain non-linear systems, International journal of modelling, identification and control, vol. 16, no. 4, pp. 392-400, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 41278 – Scopus EID: 2-s2.0-84864830146
Citation counts: Scopus - 1
DRO entry for this publication

Koh, M., Norton, M. and Khoo, S. (2012) Robust fault-tolerant leader-follower control of four-wheel-steering mobile robots using terminal sliding mode, Australian journal of electrical and electronics engineering, vol. 9, no. 3, pp. 247-253, Engineers Media, Sydney, N.S.W. [C1]
ERA journal ID: 4399 – Scopus EID: 2-s2.0-84869160194
DRO entry for this publication

Lee, Shu Ling (Alycia), Kouzani, Abbas Z. and Hu, Eric J.* (2012) Automated detection of lung nodules in computed tomography images: a review, Machine vision and applications, vol. 23, no. 1, pp. 151-163, Springer, Heidelberg, Germany [C1]
ERA journal ID: 18068 – Scopus EID: 2-s2.0-77952006699
Citation counts: Scopus - 3, Thomson - 4
DRO entry for this publication

Li, A. J., Cassidy, M. J.*, Wang, Y., Merifield, R. S.* and Lyamin, A. V.* (2012) Parametric Monte Carlo studies of rock slopes based on the Hoek-Brown failure criterion, Computers and geotechnics, vol. 45, pp. 11-18, Pergamon, Oxford, England [C1]
ERA journal ID: 3466 – Scopus EID: 2-s2.0-84861624237
Citation counts: Scopus - 7
DRO entry for this publication

Mafinejad, Yasser, Kouzani, Abbas Z., Mafinezhad, Khalil* and Kaynak, Akif (2012) Low actuation wideband RF MEMS shunt capacitive switch, Procedia engineering, vol. 29, pp. 1292-1297, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 124648 – Scopus EID: 2-s2.0-84858419532
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Cizek, Pavel and Hilditch, Timothy B. (2012) Strain rate effect on the cyclic deformation response of UFG Al alloys, Materials science and engineering A, vol. 548, pp. 69-74, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84860546892
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Man, Zhihong*, Wang, Wenyi*, Khoo, Suiyang and Yin, Juliang* (2012) Optimal sinusoidal modelling of gear mesh vibration signals for gear diagnosis and prognosis, Mechanical systems and signal processing, vol. 33, pp. 256-274, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3705 – Scopus EID: 2-s2.0-84865640110
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Man, Zhihong*, Lee, Kevin*, Wang, Dianhui*, Cao, Zhenwei* and Khoo, Suiyang (2012) Robust single-hidden layer feedforward network-based pattern classifier, IEEE transactions on neural networks and learning systems, vol. 23, no. 12, pp. 1974-1986, IEEE, Piscataway, N. J. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 2
DRO entry for this publication

Mehmood, Tariq, Dai, Xiujuan J., Kaynak, Akif and Kouzani, Abbas (2012) Improved bonding and conductivity of polypyrrole on polyester by gaseous plasma treatment, Plasma processes and polymers, vol. 9, no. 10, pp. 1006-1014, Wiley – VCH Verlag GmbH & Co. KGaA, Weinheim, Germany [C1]
ERA journal ID: 1227 – Scopus EID: 2-s2.0-84867507284
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Mehmood, Tariq, Kaynak, Akif, Mahmood, Abida* and Kouzani, Abbas (2012) Optimization of polymerization conditions and thermal degradation of conducting polypyrrole coated polyester fabrics, Fibers and polymers, vol. 13, no. 2, pp. 153-158, Springer, Amsterdam, The Netherlands [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-84857932462
Citation counts: Scopus - 1, Thomson - 2
DRO entry for this publication

Mortazavi, Daryoush, Kouzani, Abbas Z. and Soltanian-Zadeh, Hamid* (2012) Segmentation of multiple sclerosis lesions in MR images : a review, Neuroradiology, vol. 54, no. 4, pp. 299-320, Springer, Heidelberg, Germany [C1]
ERA journal ID: 16663 – Scopus EID: 2-s2.0-79955849238
Citation counts: Scopus - 1, Thomson - 8
DRO entry for this publication

Mortazavi, D., Kouzani, A. Z. and Matekovits, L.* (2012) Evolution towards a new LSPR particle : Nano-sinusoid, Progress in electromagnetics research, vol. 132, pp. 199-213, Electromagnetics Academy, Cambridge, MA [C1]
ERA journal ID: 41527 – Scopus EID: 2-s2.0-84867552843
Citation counts: Scopus - 3
DRO entry for this publication

Mortazavi, D., Kouzani, A. Z. and Vernon, K. C.* (2012) A resonance tunable and durable LSPR nano-particle sensor : AL2O3 capped silver nano-disks, Progress in electromagnetics research, vol. 130, pp. 429-446, Electromagnetics Academy, Cambridge, MA [C1]
ERA journal ID: 41527 – Scopus EID: 2-s2.0-84866541707
Citation counts: Scopus - 10
DRO entry for this publication

Mortazavi, D., Kouzani, A. Z., Kaynak, A. and Duan, W. (2012) Developing lspr design guidelines, Progress in electromagnetics research, vol. 126, pp. 203-235, Electromagnetics Academy, Cambridge, Mass. [C1]
ERA journal ID: 41527 – Scopus EID: 2-s2.0-84858392101
Citation counts: Scopus - 12
DRO entry for this publication

Nam, P.T.*, Pathirana, P.N. and Trinh, H. (2012) Exponential convergence of time-delay systems in the presence of bounded disturbances, Journal of optimization theory and applications, vol. 157, no. 3, pp. 843-852, Springer, Berlin, Germany [C1]
ERA journal ID: 40390 – Scopus EID: 2-s2.0-84876861907
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Natgunanathan, Iynkaran, Xiang, Yong, Rong, Yue*, Zhou, Wanlei and Guo, Song* (2012) Robust patchwork-based embedding and decoding scheme for digital audio watermarking, IEEE transactions on audio, speech and language processing, vol. 20, no. 8, pp. 2232-2239, Institute of Electrical and Electronics Engineers, Piscataway, N. J. [C1]
ERA journal ID: 34661 – Scopus EID: 2-s2.0-84865244384
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Navaratna, Dimuth, Shu, Li, Baskaran, Kanagaratnam and Jegatheesan, Veeriah (2012) Model development and parameter estimation for a hybrid submerged membrane bioreactor treating Ametryn, Bioresource technology, vol. 113, pp. 191-200, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84855510638
DRO entry for this publication

Navaratna, D., Shu, Li, Baskaran, K. and Jegatheesan, V. (2012) Treatment of ametryn in wastewater by a hybrid MBR system : a lab-scale study, Water science & technology, vol. 66, no. 6, pp. 1317-1324, IWA Publishing, London, England [C1]
ERA journal ID: 4696 – Scopus EID: 2-s2.0-84867205156
Citation counts: Scopus - 3, Thomson - 4
DRO entry for this publication

Navaratna, Dimuth, Elliman, Jennifer*, Cooper, Alanna*, Baskaran, Kanagaratnam, Shu, Li and Jegatheesan, Veeriah (2012) Impact of herbicide Ametryn on microbial communities in mixed liquor of a membrane bioreactor (MBR), Bioresource technology, vol. 113, pp. 181-190, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84855400942
Citation counts: Thomson - 10
DRO entry for this publication

Nepal, Kali (2012) A comparative evaluation of analytical methods to allocate individual marks from a team mark, European journal of engineering education, vol. 37, no. 4, pp. 397-404, Taylor & Francis, London, England [C1]
ERA journal ID: 20622 – Scopus EID: 2-s2.0-84865071672
Citation counts: Scopus - 1
DRO entry for this publication

Okonkwo, Paul C., Kelly, Georgina, Rolfe, Bernard F. and Pereira, Michael P. (2012) The effect of temperature on sliding wear of steel-tool steel pairs, Wear, vol. 282-283, pp. 22-30, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84858702686
Citation counts: Scopus - 1
DRO entry for this publication

Pandey, Santosh Raj, Jegatheesan, Veeriah, Baskaran, Kanagaratnam and Shu, Li (2012) Fouling in reverse osmosis (RO) membrane in water recovery from secondary effluent : a review, Reviews in Environmental Science and Biotechnology, vol. 11, no. 2, pp. 125-145, Springer, Amsterdam, The Netherlands [C1]
ERA journal ID: 4689 – Scopus EID: 2-s2.0-84861657739
Citation counts: Scopus - 6, Thomson - 5
DRO entry for this publication

Pasang, T.*, Sabol, J. C.*, Misiolek, W. Z.*, Mitchell, R.*, Short, A. B.* and Littlefair, G. (2012) Tensile ductility of electron beam welded titanium alloys, Materials science forum, vol. 713, pp. 133-138, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Pathirana, Pubudu N., Herath, Sanvidha C. K. and Savkin, Andrey V.* (2012) Multi-target tracking via space transformations using a single frequency continuous wave radar, IEEE transactions on signal processing, vol. 60, no. 10, pp. 5217-5229, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 4462 – Scopus EID: 2-s2.0-84866506913
Citation counts: Scopus - 1
DRO entry for this publication

Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2012) Wear at the die radius in sheet metal stamping, Wear, vol. 274-275, pp. 355-367, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84855268548
Citation counts: Scopus - 4
DRO entry for this publication

Rokhina, Ekaterina V.*, Lahtinen, Manu*, Makarova, Katerina*, Jegatheesan, Veeriah and Virkutyte, Jurate* (2012) Theoretical and practical aspects of chemical functionalization of carbon nanofibers (CNFs) : DFT calculations and adsorption study, Bioresource technology, vol. 113, pp. 127-131, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84455194762
Citation counts: Thomson - 1
DRO entry for this publication

Shams-Zahraei, Mojtaba, Kouzani, Abbas Z., Kutter, Steffen* and Baker, Bernard* (2012) Integrated thermal and energy management of plug-in hybrid electric vehicles, Journal of power sources, vol. 216, pp. 237-248, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 1470 – Scopus EID: 2-s2.0-84862303988
Citation counts: Scopus - 6
DRO entry for this publication

Tan, Yongjun, Aung, Naing Naing* and Liu, Tie* (2012) Evaluating localised corrosion intensity using the wire beam electrode, Corrosion science, vol. 63, pp. 379-386, Pergamon, Oxford, England [C1]
ERA journal ID: 4761 – Scopus EID: 2-s2.0-84864306686
Citation counts: Scopus - 4
DRO entry for this publication

Tay, Feisiang*, Man, Zhihong*, Cao, Zhenwei*, Khoo, Suiyang and Tan, Chee Pin* (2012) Sliding mode-like learning control for SISO complex systems with T-S fuzzy models, International journal of modelling, identification and control, vol. 16, no. 4, pp. 317-326, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 41278 – Scopus EID: 2-s2.0-84864852271
Citation counts: Scopus - 5
DRO entry for this publication

Teh, P.S. and Trinh, H. (2012) Partial state and unknown input estimation for time-delay systems, International journal of systems science, vol. 43, no. 4, pp. 748-763, Taylor & Francis, London, England [C1]
ERA journal ID: 17961 – Scopus EID: 2-s2.0-84857213057
DRO entry for this publication

Tehrani-Rokh, Masoomeh, Kouzani, Abbas and Kanwar, Jagat (2012) Gradient generating microfluidic devices for cell cultivation, Procedia engineering, vol. 29, pp. 1740-1744, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 124648 – Scopus EID: 2-s2.0-84858430749
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Thuan, M. V.*, Phat, V. N.* and Trinh, H. M. (2012) Dynamic output feedback guaranteed cost control for linear systems with interval time-varying delays in states and outputs, Applied mathematics and computation, vol. 218, no. 21, pp. 10697-10707, Elsevier, Philadelphia, Pa. [C1]
ERA journal ID: 49 – Scopus EID: 2-s2.0-84861799162
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Thuan, Mai Viet*, Phat, Vu Ngoc* and Trinh, Hieu (2012) Observer-based controller design of time-delay systems with an interval time-varying delay, International journal of applied mathematics and computer science, vol. 22, no. 4, pp. 921-927, University of Zielona Gora and Lubuskie Scientific Society, Zielona Gora, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Virkutyte, Jurate*, Jegatheesan, Veeriah (Jega) and Varma, Rajender S.* (2012) Visible light activated TiO2/microcrystalline cellulose nanocatalyst to destroy organic contaminants in water, Bioresource technology, vol. 113, pp. 288-293, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84860232501
Citation counts: Scopus - 8, Thomson - 6
DRO entry for this publication

Wang, Jiangting, Hodgson, Peter D. and Yang, Chunhui (2012) Effects of mechanical properties on the contact profile in Berkovich nanoindentation of elastoplastic materials, Journal of materials research, vol. 27, no. 1, pp. 313-319, Cambridge University Press, New York, N.Y. [C1]
ERA journal ID: 4929 – Scopus EID: 2-s2.0-84862966382
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Wang, Ying and Hao, Hong* (2012) Damage identification of steel beams using local and global methods, Advances in structural engineering, vol. 15, no. 5, pp. 807-824, Multi-Science Publishing, London, England [C1]
ERA journal ID: 4147 – Scopus EID: 2-s2.0-84863475123
Citation counts: Scopus - 4, Thomson - 1
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Hodgson, Peter D. and Yang, Chunhui (2012) Effect of residual stress on the bending of aluminium, Journal of materials processing technology, vol. 212, no. 4, pp. 877-883, Elsevier S.A., Lausanne, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84856000610
Citation counts: Scopus - 4, Thomson - 2
DRO entry for this publication

Will, Frank (2012) Fuel conservation and emission reduction through novel waste heat recovery for internal combustion engines, Fuel, vol. 102, pp. 247-255, Elsevier, Oxford, England [C1]
ERA journal ID: 3883 – Scopus EID: 2-s2.0-84866443504
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Xiang, Yong, Natgunanathan, Iynkaran, Peng, Dezhong*, Zhou, Wanlei and Yu, Shui (2012) A dual-channel time-spread echo method for audio watermarking, IEEE transactions on information forensics and security, vol. 7, no. 2, pp. 383-392, IEEE Signal Processing Society, Piscataway, N.J. [C1]
ERA journal ID: 32044 – Scopus EID: 2-s2.0-84858427685
Citation counts: Scopus - 14, Thomson - 9
DRO entry for this publication

Bejomeh, Mohammad Yaghoubi, Ganji, Behnam and Kouzani, Abbas Z. (2012) Evaluation of analogue PID, digital PID and fuzzy controllers for a servo system, International review of automatic control, vol. 5, no. 2, pp. 255-261, Praise Worthy Prize S.r.L., Naples, Italy [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yan, Wenyi*, Pereira, Michael P. and Rolfe, Bernard F. (2012) Tool wear in sheet metal stamping, Advanced materials research, vol. 421, pp. 750-753, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84255177644
DRO entry for this publication

Zarghami, Majid*, Mafinejad, Yasser, Kouzani, Abbas and Mafinezhad, Khalil* (2012) Low actuation-voltage shift in MEMS switch using ramp dual-pulse, IEICE electronics express, vol. 9, no. 12, pp. 1062-1068, Denshi Jouhou Tsuushin Gakkai (Institute of Electronics Information and Communication Engineers), Tokyo, Japan [C1]
ERA journal ID: 44853 – Scopus EID: 2-s2.0-84863643188
Citation counts: Scopus - 2, Thomson - 3
DRO entry for this publication

Zhang, Taiping*, Tang, Yuan Yan*, Fang, Bin* and Xiang, Yong (2012) Document clustering in correlation similarity measure space, IEEE transactions on knowledge and data engineering, vol. 24, no. 6, pp. 1002-1013, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 17876 – Scopus EID: 2-s2.0-84860462597
Citation counts: Scopus - 8, Thomson - 5
DRO entry for this publication

Binns, Corey* and Will, Frank (2012) Running hot, in Will, Frank (eds), Popular science, vol. 280, no. 6, pp. 52-53, Popular Science Pub., New York, N.Y. [C3.1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Guo, Wenshan.*, Chang, Chia-Yuan*, Shu, Li and Jegatheesan, Veeriah (2012) Preface : In Membrane water treatment, v.3 n.2, Membrane water treatment, vol. 3, no. 2, p. 1, Techno-Press, Daejeon, South Korea [C4]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Jegatheesan, Veeriah, Shu, Li., Virkutyte, Jurate* and Chiemchaisri, Chart* (2012) Special issue on the 4th International Conference on the 'Challenges in Environmental Science & Engineering', CESE-2011: solutions to environmental challenges through the application of advanced technologies, Reviews in environmental science and biotechnology, vol. 11, no. 2, pp. 105-106, Springer Netherlands, Amsterdam, The Netherlands [C4]
ERA journal ID: 4689 – Scopus EID: 2-s2.0-84861692454
DRO entry for this publication

Jegatheesan, Jega V., Shu, Li., Chang, Chia-Yuan* and Shon, Ho Kyong* (2012) Preface : Special issue on challenges in environmental science and engineering, CESE-2011: 25–30, September, Ever Green Plaza Hotel, Tainan City, Taiwan, Bioresource technology, vol. 113, no. June, pp. 1-2, Elsevier, Amsterdam, The Netherlands [C4]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84860258492
DRO entry for this publication

Jegatheesan, Veeriah, Nakhla, George* and Kraume, Matthias* (2012) Preface : In Bioresource technology, v.122 n.1, Bioresource technology, vol. 122, no. 1, p. 1, Elsevier BV, Amsterdam, The Netherlands [C4]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84866053321
DRO entry for this publication

Shon, Ho Kyong*, Nghiem, Long Duc*, Kim, Suhan*, Shu, Li and Jegatheesan, Jega V. (2012) Preface : Conventional and advanced technologies in treating water, wastewater and groundwater, Desalination and water treatment, vol. 47, no. 1-2, pp. 1-2, Balaban Publishers, Hopkinton, Mass. [C4]
ERA journal ID: 41476 – Scopus EID: 2-s2.0-84866468607
DRO entry for this publication

Chandran, J. and Stojcevski, A. (2012) Research in engineering and technology education : staff perspectives, in Avdelas, Aris (eds), SEFI 2012 : Engineering education 2020, meet the future : Proceedings of the 40th European Society for Engineering Education Annual Conference 2012, pp. 1-8, European Society for Engineering Education, Brussels, Belgium [E1]
DRO entry for this publication

Chandrasekaran, S., Stojcevski, A., Littlefair, G. and Joordens, M. (2012) Learning through projects in engineering education, in Avdelas, Aris (eds), SEFI 2012 : Engineering Education 2020 : Meet The Future : Proceedings of the 40th SEFI Annual Conference 2012, European Society for Engineering Education (SEFI), Brussels, Belgium [E1]
DRO entry for this publication

Das, Subrat and Littlefair, Guy (2012) Current distribution and Lorentz field modelling using cathode designs : a parametric approach, in Suarez, Carlos E. (eds), TMS 2012 : Light metals 2012 : proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012, pp. 847-851, John Wiley & Sons, Hoboken, N. J. [E1]
DRO entry for this publication

Datta, S.*, Hanafin, S., Rolfe, B. and de Souza, T. (2012) Physical prototypes in cross-functional team collaboration : a study of the Model-T2 concept car project, in Bartolo, Paulo J.; Soares de Lemos, Ana C.; Tojeira, Ana P. O.; Pereira, Antonio M. H.; Mateus, Artur J.; Mendes, Ausenda L. A.; dos Santos, Cyril; Freitas, Dino M. F.; Bartolo, Helena M.; de Amorim Almeida, Henrique; dos Reis, Igor M.; Dias, Juliana R.; (eds), VRAP 2011 : Proceedings of the 5th International Conference on Advanced Research and Rapid Prototyping, pp. 779-784, CRC Press, Boca Raton, Fla. [E1]
DRO entry for this publication

Ekanayake, Samitha W., Pathirana, Pubudu N. and Caelli, Terry* (2012) Multiple emitter localization using range only measurements considering geometrical constraints, in Unknown (ed.), ROBIO 2012 : Proceedings of the IEEE International Conference on Robotics and Biomimetics, pp. 1991-1995, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Herath, Sanvidha C.K., Pathirana, Pubudu N., Champion, Benjamin T. and Ekanayake, Samitha W. (2012) Localization with ghost elimination of emitters via time-delay-of-arrival measurements, in Unknown (ed.), ICIAfS 2012 : Proceedings of the 2012 IEEE 6th International Conference on Information and Automation for Sustainability, pp. 337-341, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Herath, Sanvidha C. K., Pathirana, Pubudu N. and de Boer, Nicholas L. (2012) Localization with ghost elimination of emitters via time-of-arrival measurements, in Unknown (ed.), ROBIO 2012 : Proceedings of the IEEE International Conference on Robotics and Biomimetics. Conference Digest, pp. 2231-2235, IEEE, Piscataway, N. J [E1]
DRO entry for this publication

Herath, Sanvidha C.K., Pathirana, Pubudu N. and Williams, Gareth L. (2012) Optimal sensor placement in range based localization for linear arrays, in Unknown (ed.), ROBIO 2012 : Proceedings of the IEEE International Conference on Robotics and Biomimetics, pp. 2225-2230, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Hosain, Md Kamal, Kouzani, Abbas and Tye, Susannah (2012) Multi-layer implantable antenna for closed loop deep brain stimulation system, in Unknown (ed.), ISCIT 2012 : Proceedings of the IEEE International Symposium on Communications and Information Technologies, pp. 643-648, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Hosain, Md Kamal, Kouzani, Abbas Z., Tye, Susannah, Mortazavi, Daryoush and Kaynak, Akif (2012) Compact stacked planar inverted-F antenna for passive deep brain stimulation implants, in Unknown (ed.), EMBC 2012 : Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 851-854, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Hosain, Md. Kamal, Kouzani, Abbas Z., Tye, Susannah, Walder, Ken and Kong, Lingxue (2012) Design of a miniature UHF PIFA for DBS implants, in Unknown (ed.), CME 2012 : Proceedings of the 2012 IEEE/ICME International Conference on Complex Medical Engineering, pp. 485-489, IEEE Computer Society, Los Alamitos, Calif. [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Huang, Pin, Pathirana, Pubudu, Alahakoon, Damminda* and Brotchie, Peter* (2012) Application of growing self-organizing map to distinguish between finger tapping and non tapping from brain images, in Unknown (ed.), ICIAfS 2012 : Proceedings of the 2012 IEEE 6th International Conference on Information and Automation for Sustainability, pp. 232-236, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Islam, Md. Saiful, Kouzani, Abbas Z., Dai, Xiujuan J., Schiretz, Helmut F.*, Lim, Yang C. and Michalski, Wojtek P.* (2012) Sensitivity analysis of a sub-wavelength localized surface plasmon resonance graphene biosensor, in unknown (ed.), CME 2012 : Proceedings of the 2012 IEEE/ICME International Conference on Complex Medical Engineering, pp. 490-494, IEEE Computer Society, Los Alamitos, Calif. [E1]
DRO entry for this publication

Islam, Md. Saiful and Kouzani, Abbas Z. (2012) A S-parameters-based detection method for a multilayer SPR biosensor, in Unknown (ed.), EMBC 2012 : Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 539-542, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Joordens, Matthew, Chandrasekaran, Sivachandran, Stojcevski, Alex and Littlefair, Guy (2012) The process of design based learning : a students' perspective, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, pp. 927-934, ESER group, Swinburne University of Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Joordens, Matthew (2012) Creating project-based learning in software, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, pp. 422-430, ESER group, Swinburne University of Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Joordens, Matthew, Chandran, Jaideep and Stojcevski, Alex (2012) Comparison of Technology Enabled Learning Practices (TELP) in engineering : a student's perspective, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, pp. 186-194, ESER group, Swinburne University of Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Khoo, Suiyang, Yin, Juliang* and Man, Zhihong* (2012) Adaptive finite-time stabilization of a class of stochastic nonlinear systems, in Unknown (ed.), ICARCV 2012 : Proceedings of the 12th International Conference on Control, Automation, Robotics and Vision, pp. 1250-1255, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Kipli, Kuryati, Kouzani, Abbas Z. and Joordens, Matthew (2012) Computer-aided detection of depression from magnetic resonance images, in Unknown (ed.), CME 2012 : Proceedings of the 2012 IEEE/ICME International Conference on Complex Medical Engineering, pp. 500-505, IEEE Computer Society, Los Alamitos, Calif. [E1]
Citation counts: Scopus - 1
DRO entry for this publication

Lee, Jeng-Dao*, Khoo, Suiyang and Lai, Kwei-Yuan* (2012) Terminal sliding mode control strategy design for second-order nonlinear system, in Unknown (ed.), IECON 2012 : Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, pp. 2512-2517, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Li, A.J., Lin, H.D.*, Merifield, R.S.* and Lyamin, A.V.* (2012) A case study of ground response due to diaphragm wall installation, in Unknown (ed.), ANZ 2012 : Ground engineering in a changing world : Proceedings of the 11th Australia-New Zealand Conference on Geomechanics, pp. 809-814, The conference, Melbourne, Vic. [E1]
DRO entry for this publication

Littlefair, Guy and Stojcevski, Alex (2012) CADET - Centre for Advanced Design in Engineering Training, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, pp. 935-942, ESER group, Swinburne University of Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Long, John M., Stannard, Warren B., Chenery, Ken and Joordens, Matthews A. (2012) Physics practicals for distance education in an undergraduate engineering course, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, pp. 691-701, ESER group, Swinburne University of Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Long, John Matthew, Horan, Ben P. and Hall, Robynne (2012) Undergraduate electronics students' use of home experiment kits for distance education, in Unknown (ed.), ASEE 2012 : Proceedings of the 119th American Society for Engineering Education Annual Conference & Exposition, pp. 1-12, American Society for Engineering Education, Washington, D.C. [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2012) Effect of roller leveling on the bending behaviour of aged steel strip, in Mori, K.; Pietrzyk, M.; Kusiak, J.; Majta, J.; Hartley, P. and Lin, J. (eds), Metal Forming 2012 : Proceedings of the 14th International Conference on Metal Forming, pp. 699-702, Wiley-VCH, Krakow, Poland [E1]
DRO entry for this publication

Mortazavi, Daryoush, Kouzani, Abbas Z., Mafinejad, Yasser and Hosain, Md. Kamal (2012) Plasmon eignevalues as a function of nano-spheroids size and elongation, in unknown (ed.), CME 2012 : Proceedings of the 2012 IEEE/ICME International Conference on Complex Medical Engineering, pp. 495-499, IEEE Computer Society, Los Alamitos, Calif. [E1]
DRO entry for this publication

Mortazavi, D., Kouzani, A. Z. and Matekovits, L.* (2012) Investigation on localized surface plasmon resonance of different nano-particles for bio-sensor applications, in Unknown (ed.), ICEAA 2012 : Proceedings of the 14th International Conference on Electromagnetics in Advanced applications, pp. 865-868, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Mortazavi, Daryoush, Kouzani, Abbas Z. and Kaynak, Akif (2012) Investigating nanoparticle-substrate interaction in LSPR biosensing using the image-charge theory, in Unknown (ed.), EMBC 2012 : Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 2363-2366, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Nam, Phan T.*, Pathirana, Pubudu N. and Trinh, Hieu M. (2012) Exponential stabilization for state and input delay systems via output feedback, in Unknown (ed.), AUCC 2012 : Proceedings of the 2nd Australian Control Conference, pp. 122-125, Engineers Australia, Sydney, N.S.W. [E1]
DRO entry for this publication

Nasierding, Gulisong* and Kouzani, Abbas Z. (2012) Comparative evaluation of multi-label classification methods, in Unknown (ed.), FSKD 2012 : Proceedings of the 9th International Conference on Fuzzy Systems and Knowledge Discovery, pp. 679-683, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Natgunanathan, Iynkaran, Xiang, Yong and Zong, Tianrui (2012) Patchwork-based stereo audio watermarking against de-synchronization attack, in Unknown (ed.), CISP 2012 : Proceedings of the 5th International Congress on Image and Signal Processing, pp. 1601-1605, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Nepal, Kali Prasad (2012) A review of mathematical equations to assign individual marks from a team mark, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, pp. 817-823, ESER group, Swinburne University of Technology, Melbourne, Vic. [E1]
DRO entry for this publication

Pak, Amin*, Mafinejad, Yasser, Kouzani, Abbas, Nabovati, Hooman* and Mafinezhad, Khalil* (2012) Accurate modeling of low actuation voltage RFMEMS switches using artificial neural networks, in Unknown (ed.), ISCAS 2012 : Proceedings of the 2012 IEEE International Symposium on Circuits and Systems, pp. 3282-3284, IEEE, Piscataway, N. J. [E1]
DRO entry for this publication

Pasang, T.*, Sabol, J. C.*, Misiolek, W. Z.*, Mitchell, R.*, Short, A. B.* and Littlefair, G. (2012) Metallurgy and deformation of electron beam welded similar titanium alloys, in Unknown (ed.), AIP Conference Proceedings, pp. 982-990, American Institute of Physics, College Park, Md. [E1]
DRO entry for this publication

Tan, Yongjun, Hinton, Bruce and Forsyth, Maria (2012) Carbon dioxide corrosion inhibition : an overview of recent research on new inhibitor development, in Unknown (ed.), ACA Corrosion & Prevention 2012 : Proceedings of the Annual Australasian Corrosion Association Conference, pp. 1-9, Australasian Corrosion Association, Melbourne, Vic. [E1]
DRO entry for this publication

Tay, Fei Siang*, Man, Zhihong*, Cao, Zhenwei*, Jin, Jiong* and Khoo, Sui Yang (2012) A robust learning control for SISO Nonlinear systems with T-S Fuzzy Model : C02-robust control, in Unknown (ed.), ICARCV 2012 : Proceedings of the 12th International Conference on Control, Automation, Robotics and Vision, pp. 492-497, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Wang, Ying and Hao, Hong* (2012) Static and dynamic tests for damage identification of a slab-girder structure, in Unknown (ed.), PLSE 2012 : First International Conference on Performance-based and Life-cycle Structural Engineering, pp. 1-8, Hong Kong Polytechnic University, Hong Kong [E1]
DRO entry for this publication

Wang, Ying and Ou, Jinping* (2012) Synthetic evaluation method for bridge priority ranking, in Unknown (ed.), ASEC 2012 : Past, Present and Future of Structural Engineering : Proceedings of the Australasian Structural Engineering Conference, pp. 1-8, Engineers Australia, Melbourne, Vic. [E1]
DRO entry for this publication

Wang, Ying and Hao, Hong* (2012) Guided wave based methods for damage detection : experimental study on concrete joint, in Unknown (ed.), ISSE 2012 : Proceedings of the 12th International Symposium on Structural Engineering, pp. 1-6, The Conference, Wuhan, China [E1]
DRO entry for this publication

Weiss, M, Abeyrathna, B., Marnette, J., Badr, O., Abvabi, A., Jiao, J. and Hodgson, P. (2012) Approach for testing the material behavior in roll forming in a small scale, in Unknown (ed.), IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, pp. 1-6, International Deep-Drawing Research Group, Mumbai, India [E1]
DRO entry for this publication

Will, Frank Stefan and Mayson, Dylan (2012) Combustion simulations for a self controlling variable compression ratio connecting rod, in Unknown (ed.), SAE 2012 : Technical papers from the 2012 SAE World Congress and Exhibition, SAE, Detroit, Michigan [E1]
DRO entry for this publication

Shafiullah, G. M.*, M. T. Oo, Amanullah*, Ali, A. B. M. Shawkat*, Wolfs, Peter* and Arif, Mohammad (2012) Meeting energy demand and global warming by integrating renewable energy into the grid, in Unknown], (eds), AUPEC 2012 : Green smart grid systems : Proceedings of the Australasian Universities Power Engineering 2012 Conference, pp. 1-7, IEEE, Piscataway, N.J. [E1.1]
DRO entry for this publication

Weiss, Matthias, Kupke, Andreas and Rolfe, Bernard (2012) Effect of tensile pre-strain on bending and unloading of automotive steels, in Unknown (ed.), IDDRG 2012 : Lightweighting, possibilities & challenges : Proceedings of the 2012 International Deep Drawing Research Group Conference, pp. 409-415, International Deep-Drawing Research Group, Mumbai, India [E1.1]
DRO entry for this publication

Alam, Morshed*, Das, Subrat, Morsi, Yos*, Yang, William*, Chen, John* and Brooks, Geoffrey* (2012) Study on bubbling behaviour in the Hall-heroult cell using low temperature electrolyte, in Unknown (ed.), ISTP 2012 : Proceedings of the 23rd International Symposium on Transport Phenomena, pp. 1-6, ISTP, Auckland, New Zealand [E2]
DRO entry for this publication

Das, Subrat, Littlefair, Guy, Morsi, Yos* and Brooks, Geoffrey* (2012) Tracking single bubble in Hall-Héroult aluminium cell : an experimental and numerical study, in Isman, Aytekin and Dundar, Sahin (eds), ISTEC 2012 : Proceedings of the 3rd International Science & Technology Conference, pp. 1290-1298, ISTEC, Dubai, UAE [E2]
DRO entry for this publication

Do, Hung Viet, Das, Subrat, Owida, Amal*, Yousif, Khaled* and Morsi, Yosry S.* (2012) Optimization of bypass graft using FSI numerical method, in Isman, Aytekin and Dundar, Sahin (eds), ISTEC 2012 : Proceedings of the 3rd International Science & Technology Conference, pp. 893-902, ISTEC, Dubai, UAE [E2]
DRO entry for this publication

Feteris, Susan (2012) The role of women academics in Australian universities, in Unknown (ed.), AIP 2012 : Proceedings of the 20th Australian Institute of Physics Congress, pp. 1-4, AIP Publishing LLC, Sydney, N.S.W. [E2]
DRO entry for this publication

Nagahawatte, Chatura V.D., Herath, Sanvidha K. and Pathirana, Pububu N. (2012) Localisation of an object in motion in 3D space via angle only measurements, in Unknown (ed.), ICIAfS 2012 : Proceedings of the 2012 IEEE 6th International Conference on Information and Automation for Sustainability, pp. 1-5, IEEE, Piscataway, N.J. [E2]
DRO entry for this publication

Tan, Yongjun, Hinton, Bruce and Forsyth, Maria (2012) An overview of localised corrosion inhibitor evaluation, in Unknown (ed.), EuroCorr 2012 Technical Programme, European Federation of Corrosion, Istanbul, Turkey [E2]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Larranaga, Jon*, Glados, Lander*, Yang, Chunhui* and Weiss, Matthias (2012) Using the solid-shell element to model the roll forming of large radii profiles, in Unknown (ed.), Steel Research Journal : Proceedings of the 14th International Conference on Metal Forming, pp. 711-714, Wiley, London, England [E2.1]
DRO entry for this publication

Asgari, Alireza and Rolfe, Bernard F. (2012) Pedagogy of engineering design and engineering graphics, in Mann, Llewellyn and Daniel, Scott (eds), AAEE 2012 : The profession of engineering education, advancing teaching, research and careers : Proceedings of the 23rd Annual Conference of the Australasian Association for Engineering Education, p. 943, ESER group, Swinburne University of Technology, Melbourne, Vic. [E3]
DRO entry for this publication

Asgari, Alireza (2012) Prediction of mechanical properties of advanced high strength steels by 2D and 3D microstructural models, in Unknown (ed.), Proceedings of the 2012 International Conference of Computational Methods, pp. 1-8, The Conference, Gold Coast, Qld. [E3]
DRO entry for this publication

Asgari, Alireza (2012) Multi-scale modeling of fracture resistance in TRIP-assisted multi-phase steels, in Unknown (ed.), MS&T 2012 : Proceedings of the Materials Science and Technology Conference, p. 1, MS&T, Pittsburgh, Pa. [E3]
DRO entry for this publication

Kim, Seung-Hyun*, Min, Choong-Sik*, Kim, Chi-Seong* and Jegatheesan, Jega (2012) Chlorine decay behaviors of seawater depending desalination techniques, in Unknown (ed.), ICDE 2013 : Clean water and energy : Abstracts Book of the International Conference and Exhibition on Desalination for the Environment, p. 93, The Conference, Barcelona, Spain [E3]
DRO entry for this publication

Liu, Jianxin*, Li, Pei*, Wang, Hongnan*, Zhu, Meichun*, Zhang, Zhihong*, Wang, Ying and Wang, Hongwei* (2012) Design and nonlinear analysis of a new skip-floor shear wall structure, in Unknown (ed.), ISSE 2012 : Proceedings of the 12th International Symposium on Structural Engineering, Science Press, Wuhan, China [E3]
DRO entry for this publication

Rolfe, Bernard and Pereira, Michael (2012) Contact conditions and thermal effects on tooling wear when stamping AHSS, in Unknown (ed.), ICMPC 2012 : Proceedings of the 2nd International Conference on Materials, Processing and Characterization, The Conference, Hyderabad, India [E3]
DRO entry for this publication

Isaksson, Mats, Horan, Ben and Nahavandi, Saeid (2012) Low-cost 5-DOF haptic stylus interaction using two phantom omni devices, in Isokoski, Poika and Springare, Jukka (eds), EuroHaptics 2012 : Proceedings of the 2012 EuroHaptics International Conference, pp. 1-12, The Conference, Tampere, Finland [EN]
DRO entry for this publication

Navaratna, D., Shu, Li., Baskaran, K. and Jegatheesan, V. (2012) Removal of Ametryn from wastewater using a hybrid membrane bioreactor (MBR), in Rao, D.G.; Senthilkumar, R.; Byrne, J.A. and Feroz, S. (eds), Proceedings of the 2012 IWA World Water Congress, p. 1, IWA Publishing, London, England [EN]
DRO entry for this publication

Jones, Cheryl* and Will, Frank (Contibutor) (2012) Hot idea helps cut the bills - Backyard hero - The Australian Innovation Challenge, in Will, Frank (eds), The Australian, p. 14, Nationwide News, Canberra, A.C.T. [M.1]
DRO entry for this publication

Nadin, Mitchell* and Will, Frank (2012) Finding a use for old tyres gives professor added drive - The Australian Innovation Challenge, in Will, Frank (eds), The Australian, p. 33, Nationwide News, Canberra, A.C.T. [M.1]
DRO entry for this publication

Plaue, Noah* and Will, Frank (Contibutor) (2012) The 1979 oil crisis inspired this man to create a better engine system, Business insider Australia, p. 1, Business insider Australia International, Sydney, N.S.W. [M.1]
DRO entry for this publication

Plaue, Noah* and Will, Frank (Contibutor) (2012) This simple engine modification could increase your car's mileage and decrease its emissions, Business insider Australia, p. 1, Business insider Australia International, Sydney, N.S.W. [M.1]
DRO entry for this publication

Will, Frank (2012) Frank Will - Backyard innovation, The Australian, Nationwide News, Canberra, A.C.T. [M.1]
DRO entry for this publication

Will, Frank (2012) Winners - The Australian Innovation Challenge, in Will, Frank (eds), The Australian, p. 33, Nationwide News, Canberra, A.C.T. [M.1]
DRO entry for this publication

Will, Frank (2012) Frank Will winner : backyard innovation, in Will, Frank (eds), The Australian, p. 1, Nationwide News, Canberra, A.C.T. [M.1]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2012

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Friday 28th November 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010