Research Services Division

Deakin Research

2013 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Tan, Yongjun (2013) Heterogeneous electrode processes and localized corrosion, Wiley, Hoboken, N.J. [A1]
DRO entry for this publication

Lens, Piet*, Virkutyte, Jurate*, Jegatheesan, Veeriah, Kim, Seung-Hyan* and Al-Abed, Souhail* (2013) Preface, in Lens, Piet; Virkutyte, Jurate; Jegatheesan, Veeriah; Kim, Seung-Hyan and Al-Abed, Souhail (eds), 1 [A7]
DRO entry for this publication

Shu, Li, Jegatheesan, Veeriah, Pandey, Ashok*, Virkutyte, Jurate* and Utomo, Handojo Djati* (2013) Solutions to environmental challenges through innovations in research, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Asiatech Publishers, New Delhi, India [A7]
DRO entry for this publication

Das, Subrat (2013) Partially filled porous enclosures, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 195-212, Asiatech Publishers, New Delhi, India [B1]
DRO entry for this publication

Islam, Fakhrul Md., M. T. Oo, Amanullah and Chowdhury, Shaheen Hasan* (2013) The traditional power generation and transmission system: some fundamentals to overcome challenges, in Ali, A. B. M. Shawkat (eds), Smart grids: opportunities, developments and trends, pp. 1-21, Springer, London, England [B1]
DRO entry for this publication

Masse, Julie*, Shu, Li, Jegatheesan, Veeriah, Gros, Jean-Bernard* and Phong, Diep Dinh* (2013) Variations in the physical and biochemical properties of sugarcane juice before and after microfiltration, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 121-142, Asiatech Publishers Inc., New Delhi, India [B1]
DRO entry for this publication

Muthukumaran, Shobha*, Subramaniam, Chinnu and Baskaran, Kanagaratnam (2013) Reduction of sodium strengths in wastewater streams from food and beverage industries, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 271-291, Asiatech Publishers, New Delhi, India [B1]
DRO entry for this publication

Neilly, Adam*, Jegatheesan, Veeriah and Shu, Li (2013) A treatment process for the recovery of minerals and water from acid mine drainage, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 224-245, Asiatech Publishers Inc., New Delhi, India [B1]
DRO entry for this publication

Nepal, Kali Prasad (2013) Environmental impacts of proposed high speed rail in Australia, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 456-474, Asiatech Publishers Inc., New Delhi, India [B1]
DRO entry for this publication

Pandey, Santosh Raj, Jegatheesan, Veeriah, Baskaran, Kanagaratnam and Muthukumaran, Shobha* (2013) Pre-treatment technologies for reverse osmosis (RO) during water recovery, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 143-194, Asiatech Publishers, New Delhi, India [B1]
DRO entry for this publication

Rahman, M. Md.* and M. T. Oo, Amanullah (2013) Smart meter, in Ali, A. B. M. Shawkat (eds), Smart grids: opportunities, developments and trends, pp. 109-133, Springer, London, England [B1]
DRO entry for this publication

Shrestha, Ujjwal, Shu, Li, Jegatheesan, Veeriah and Tsuzuki, Takuya* (2013) Fate, mobility and toxicity of ZnO nanoparticles in water, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 292-319, Asiatech Publishers Inc., New Delhi, India [B1]
DRO entry for this publication

Shrestha, U., Jegatheesan, V., Shu, L. and Virkutyte, J.* (2013) Mobility, fate and toxicity of nanomaterials/nanoparticles in water and wastewater, in Lens, P.N.L.; Virkutyte, J.; Jegatheesan, J.; Kim, S.-H. and Al-Abed, S. (eds), Nanotechnology for water and wastewater treatment, pp. 127-152, IWA Publishing, London, England [B1]
DRO entry for this publication

Shu, Li, Wu, Shuang* and Jegatheesan, Veeriah (2013) Directly observe sodium chloride aggregates waltzing through dilute solutions, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 213-223, Asiatech Publishers Inc., New Delhi, India [B1]
DRO entry for this publication

Shu, Li, Jegatheesan, Veeriah, Pandey, Ashok*, Virkutyte, Jurate* and Utomo, Handojo Djati* (2013) Solutions to environmental challenges through innovations in research, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 1-14, Asiatech Publishers Inc., New Delhi, India [B1]
DRO entry for this publication

Shurvell, Thomas*, Shu, Li, Keir, Greg and Jegatheesan, Veeriah (2013) Performance of treatment technologies in removing lower molecular weight persistent organic pollutants, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 246-270, Asiatech Publishers, New Delhi, India [B1]
DRO entry for this publication

Tan, Mike Yongjun, Huo, Ying and Shu, Li (2013) Monitoring and understanding the effects of high salt concentration and residue on copper and aluminium corrosion, in Shu, Li; Jegatheesan, Veeriah; Pandey, Ashok; Virkutyte, Jurate and Utomo, Handojo Djati (eds), Solutions to environmental challenges through innovations in research, pp. 393-405, Asiatech Publishers, New Delhi, India [B1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter D. and Weiss, Matthias (2013) Development of an inverse routine to predict residual stresses in the material based on a bending test, Key engineering materials, vol. 554-557, pp. 949-956, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-84880550088
DRO entry for this publication

Alahakoon, Sanath*, Fernando, Tyrone*, Trinh, Hieu and Sreeram, Victor* (2013) Unknown input sliding mode functional observers with application to sensorless control of permanent magnet synchronous machines, Journal of the Franklin Institute, vol. 350, no. 1, pp. 107-128, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 30840 – Scopus EID: 2-s2.0-84871618513
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Amini, Abbas, Cheng, Chun*, Naebe, Minoo, Church, Jeffery S.*, Hameed, Nishar, Asgari, Alireza* and Will, Frank (2013) Temperature variations at nano-scale level in phase transformed nanocrystalline NiTi shape memory alloys adjacent to graphene layers, Nanoscale, vol. 5, pp. 6479-6484, RSC Publications, Cambridge, England [C1]
ERA journal ID: 41997 – Scopus EID: 2-s2.0-84879872199
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Amini, Abbas, Hameed, Nishar, Church, Jeffrey S.*, Cheng, Chun*, Asgari, Alireza and Will, Frank (2013) Effect of graphene layers on the thermomechanical behaviour of a NiTi shape memory alloy during the nanoscale phase transition, Scripta materialia, vol. 68, no. 6, pp. 420-423, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84872139584
Citation counts: Scopus - 5, Thomson - 1
DRO entry for this publication

Amini, Abbas, Cheng, Chun* and Asgari, Alireza (2013) Combinational rate effects on the performance of nano-grained pseudoelastic Nitinols, Materials letters, vol. 105, pp. 98-101, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1005 – Scopus EID: 2-s2.0-84878161657
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Tafti, Roohollah Azizi*, Naeini, Hassan Moslemi*, Tehrani, Mehdi Salmani*, Rolfe, Bernard and Weiss, Matthias (2013) Theoretical extension of elastic-perfectly plastic deformation length in roll forming of a channel section, International journal of materials and product technology, vol. 47, no. 1/2/3/4, pp. 33-45, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893922690
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Experimental study into the correlation between the incremental forming and the nature of springback in automotive steels, International journal of materials and product technology, vol. 47, no. 1/2/3/4, pp. 150-161, Inderscience Publishers, Geneva, Switzerland [C1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893952933
DRO entry for this publication

Chandrasekaran, Sivachandran, Stojcevski, Alex, Littlefair, Guy and Joordens, Matthew (2013) Project-oriented design-based learning: aligning students’ views with industry needs, International journal of engineering education, vol. 29, no. 5, pp. 1109-1118, Tempus Publications, Hamburg, Germany [C1]
ERA journal ID: 20618 – Scopus EID: Not tagged
DRO entry for this publication

Chen, Z.W.*, Yazdanian, S.* and Littlefair, G. (2013) Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds, Journal of materials science, vol. 48, no. 6, pp. 2624-2634, Springer, Berlin, Germany [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-84879556157
DRO entry for this publication

de Souza, T. and Rolfe, B.F. (2013) Understanding robustness of springback in high strength steels, International journal of mechanical sciences, vol. 68, pp. 236-245, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3680 – Scopus EID: 2-s2.0-84875212097
Citation counts: Scopus - 1
DRO entry for this publication

Fernando, Tyrone* and Trinh, Hieu (2013) A procedure for designing linear functional observers, Applied mathematics letters, vol. 26, no. 2, pp. 240-243, Pergamon, Oxford, England [C1]
ERA journal ID: 50 – Scopus EID: 2-s2.0-84867876964
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Fernando, T.L.*, Phat, V.N.* and Trinh, H.M. (2013) Output feedback guaranteed cost control of uncertain linear discrete systems with interval time-varying delays, Applied mathematical modelling, vol. 37, no. 3, pp. 1580-1589, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 48 – Scopus EID: 2-s2.0-84870242816
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Herath, Sanvidha C.K. and Pathirana, Pubudu N. (2013) Optimal sensor arrangements in Angle of Arrival (AoA) and range based localization with linear sensor arrays, Sensors, vol. 13, no. 9, pp. 12277-12294, MDPI AG, Basel, Switzerland [C1]
ERA journal ID: 34304 – Scopus EID: 2-s2.0-84884386991
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Herath, Sanvidha C.K. and Pathirana, Pubudu N. (2013) Robust localization with minimum number to TDoA measurements, IEEE signal processing letters, vol. 20, no. 10, pp. 949-951, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 4438 – Scopus EID: 2-s2.0-84881413260
DRO entry for this publication

Hosain, Md Kamal and Kouzani, Abbas Z. (2013) Assessment of functional and biological compatibility of antenna in a head-mountable DBS device using a rat model, Neuroscience and biomedical engineering, vol. 1, no. 1, pp. 73-82, Bentham Science Publishers, Amsterdam, The Netherlands [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Huo, Ying, Tan, Mike Yongjun and Shu, Li (2013) Effects of high salt concentration and residue on copper and aluminum corrosion, Chemical research in Chinese universities, vol. 29, no. 3, pp. 538-544, Jilin Daxue, Changchun, China [C1]
ERA journal ID: 124562 – Scopus EID: 2-s2.0-84882786319
DRO entry for this publication

Islam, Md. Saiful and Kouzani, Abbas Z. (2013) Simulation and analysis of a sub-wavelength grating based multilayer surface plasmon resonance biosensor, Journal of lightwave technology, vol. 31, no. 9, pp. 1388-1398, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 1252 – Scopus EID: 2-s2.0-84897583756
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Jia, Dawei, Bhatti, Asim, Nahavandi, Saeid and Horan, Ben (2013) Human performance measures for interactive haptic-audio-visual interfaces, IEEE transactions on haptics, vol. 6, no. 1, pp. 46-57, IEEE, Piscataway, N.J. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Thomson - 1
DRO entry for this publication

Kargaran, Ehsan*, Zoka, Negar*, Mafinejad, Yasser, Kouzani, Abbas Z. and Mafinezhad, Khalil* (2013) An ultra low power OTA with improved unity gain bandwidth product, IEICE electronics express, vol. 10, no. 20, pp. 1-6, Denshi Jouhou Tsuushin Gakkai (Institute of Electronics Information and Communication Engineers), Tokyo, Japan [C1]
ERA journal ID: 44853 – Scopus EID: 2-s2.0-84886554808
DRO entry for this publication

Kargaran, Ehsan*, Mafinejad, Yasser, Mafinezhad, Khalil* and Nabovati, Hooman* (2013) A new gm-boosting current reuse CMOs folded cascode LNA, IEICE electronics express, vol. 10, no. 24, pp. 1-6, Denshi Jouhou Tsuushin Gakka, Tokyo, Japan [C1]
ERA journal ID: 44853 – Scopus EID: 2-s2.0-84891523609
DRO entry for this publication

Kargaran, Ehsan*, Zoka, Negar*, Kouzani, Abbas Z., Mafinezhad, Khalil* and Nabovati, Hooman* (2013) Highly linear low voltage low power CMOS LNA, IEICE electronics express, vol. 10, no. 21, pp. 1-6, Denshi Jouhou Tsuushin Gakkai (Institute of Electronics Information and Communication Engineers), Tokyo, Japan [C1]
ERA journal ID: 44853 – Scopus EID: 2-s2.0-84887449137
DRO entry for this publication

Kashef, Sadaf, Asgari, Alireza, Hilditch, Timothy B., Yan, Wenyi*, Goel, Vijay K.*, Quadbeck, Peter* and Hodgson, Peter D. (2013) Fracture mechanics of stainless steel foams, Materials science and engineering : A, vol. 578, pp. 115-124, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-84879258404
DRO entry for this publication

Kaynak, Akif, Mehmood, Tariq, Dai, Xiujuan J., Magniez, Kevin and Kouzani, Abbas (2013) Study of radio frequency plasma treatment of PVDF film using Ar, O2 and Ar + O2 gases for improved polypyrrole adhesion, Materials, vol. 6, no. 8, pp. 3482-3493, MDI Publishing, Basel, Switzerland [C1]
ERA journal ID: 123663 – Scopus EID: 2-s2.0-84884400168
Citation counts: Thomson - 1
DRO entry for this publication

Khayyam, Hamid, Abawajy, Jemal, Javadi, Bahman*, Goscinski, Andrzej, Stojcevski, Alex and Bab-Hadiashar, Alireza* (2013) Intelligent battery energy management and control for vehicle-to-grid via cloud computing network, Applied energy, vol. 111, pp. 971-981, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4005 – Scopus EID: 2-s2.0-84880756591
Citation counts: Scopus - 6
DRO entry for this publication

Khayyam, Hamid (2013) Adaptive intelligent control of vehicle air conditioning system, Applied thermal engineering, vol. 51, no. 1-2, pp. 1154-1161, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-84870846003
Citation counts: Scopus - 3, Thomson - 1
DRO entry for this publication

Khoo, Suiyang, Yin, Juliang*, Man, Zhihong* and Yu, Xinghuo* (2013) Finite-time stabilization of stochastic nonlinear systems in strict-feedback form, Automatica, vol. 49, no. 5, pp. 1403-1410, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4400 – Scopus EID: 2-s2.0-84874223948
DRO entry for this publication

Kipli, Kuryati, Kouzani, Abbas Z. and Hamid, Isredza Rahmi A. (2013) Investigating machine learning techniques for detection of depression using structural MRI volumetric features, International journal of bioscience, biochemistry and bioinformatics, vol. 3, no. 5, pp. 444-448, International Association of Computer Science and Information Technology Press (IACSIT Press), Singapore [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kipli, Kuryati, Kouzani, Abbas Z. and Williams, Lana J. (2013) Towards automated detection of depression from brain structural magnetic resonance images, Neuroradiology, vol. 55, no. 5, pp. 567-584, Springer, Berlin, Germany [C1]
ERA journal ID: 16663 – Scopus EID: 2-s2.0-84878729599
Citation counts: Scopus - 3
DRO entry for this publication

Kouzani, Abbas Z., Abulseoud, Osama A.*, Tye, Susannah J.*, Hosain, Md Kamal and Berk, Michael (2013) A low power micro deep brain stimulation device for murine preclinical research, IEEE journal of translational engineering in health and medicine, vol. 1, pp. 1-9, IEEE, Piscataway, N.J. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Kumar, Apurv, Das, Subrat, Fabijanic, Daniel, Gao, Weimin and Hodgson, Peter (2013) Bubble-wall interaction for asymmetric injection of jets in solid-gas fluidized bed, Chemical Engineering Science, vol. 101, no. 41537, pp. 56-68, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3858 – Scopus EID: 2-s2.0-84880297023
Citation counts: Scopus - 1
DRO entry for this publication

Lee, Jeng-Dao*, Khoo, Suiyang and Wang, Zhi-Bin* (2013) DSP-based sliding-mode control for electromagnetic-levitation precise position system, IEEE transactions on industrial informatics, vol. 9, no. 2, pp. 817-827, IEEE, Piscataway, N. J. [C1]
ERA journal ID: 41168 – Scopus EID: 2-s2.0-84889242591
Citation counts: Scopus - 6
DRO entry for this publication

Lee, J.D.*, Lin, J.F.* and Li, A.J. (2013) Estimator-based sliding mode control strategy design, Australian journal of electrical and electronics engineering, vol. 10, no. 1, pp. 97-106, Engineers Media, Sydney, N.S.W. [C1]
ERA journal ID: 4399 – Scopus EID: 2-s2.0-84876140336
DRO entry for this publication

Mafinejad, Yasser, Kouzani, Abbas and Mafinezhad, Khalil* (2013) Review of low actuation voltage RF MEMS electrostatic switches based on metallic and carbon alloys, Journal of microelectronics, electric components and materials, vol. 43, no. 2, pp. 85-96, Strokovno Drustvo za Mikroelektroniko, Elektronske Sestavne Dele in Materiale (MIDEM), Ljubljana, Slovenia [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Mafinejad, Yasser, Zarghami, Majid*, Kouzani, Abbas Z. and Mafinezhad, Khalil* (2013) Design and simulation of a high isolation RF MEMS shunt capacitive switch for C-K band, IEICE electronics express, vol. 10, no. 24, pp. 1-8, The Institute of Electronics, Information and Communication Engineers, Tokyo, Japan [C1]
ERA journal ID: 44853 – Scopus EID: 2-s2.0-84891505191
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Stanford, Nicole E. and Hilditch, Timothy B. (2013) Shear bands evolution in ultrafine-grained aluminium under cyclic loading, Scripta materialia, vol. 68, no. 10, pp. 821-824, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84875214906
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Stanford, Nicole E. and Hilditch, Timothy B. (2013) The role of shear banding on the fatigue ductility of ultrafine-grained aluminium, Scripta materialia, vol. 68, no. 5, pp. 269-272, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-84871716799
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Man, Zhihong*, Lee, Kevin*, Wang, Dianhui*, Cao, Zhenwei* and Khoo, Suiyang (2013) An optimal weight learning machine for handwritten digit image recognition, Signal processing, vol. 93, no. 6, pp. 1624-1638, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4509 – Scopus EID: 2-s2.0-84875260929
Citation counts: Thomson - 1
DRO entry for this publication

Mortazavi, Daryoush, Kouzani, Abbas Z., Matekovits, Ladislau* and Duan, Wei (2013) Localized surface plasmon resonance : nano-sinusoid arrays, Journal of electromagnetic waves and applications, vol. 27, no. 5, pp. 638-648, Taylor & Francis, London, England [C1]
ERA journal ID: 4595 – Scopus EID: 2-s2.0-84875718982
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Muthukumaran, Shobha and Baskaran, Kanagaratnam (2013) Organic and nutrient reduction in a fish processing facility : a case study, International biodeterioration and biodegradation, vol. 85, pp. 563-570, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3414 – Scopus EID: 2-s2.0-84876817646
DRO entry for this publication

Naebe, Maryam, Robin, Nicholas, Wang, Xungai and Collins, Paul (2013) Assessment of performance properties of wetsuits, Proceedings of the Institution of Mechanical Engineers. Part P, Journal of sports engineering and technology, vol. 227, no. 4, pp. 255-264, Sage Publications, London, England [C1]
ERA journal ID: 123515 – Scopus EID: 2-s2.0-84887417185
DRO entry for this publication

Nepal, Kali Prasad (2013) Comparative evaluation of PBL and traditional lecturebased teaching in undergraduate engineering courses : evidence from controlled learning environment, International journal of engineering education, vol. 29, no. 1, pp. 17-22, Tempus Publications, Hamburg, Germany [C1]
ERA journal ID: 20618 – Scopus EID: 2-s2.0-84873622678
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Nomani, J., Pramanik, A.*, Hilditch, T. and Littlefair, G. (2013) Machinability study of first generation duplex (2205), second generation duplex (2507) and austenite stainless steel during drilling process, Wear, vol. 304, no. 1-2, pp. 20-28, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-84878153171
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Ou, G.*, Wang, Y., Hao, H.* and Zhu, X.Q.* (2013) Identification of de-bonding between steel bars and concrete using wavelet techniques : comparative study, Australian journal of structural engineering, vol. 14, no. 1, pp. 43-56, Engineers Media, Canberra, A.C.T. [C1]
ERA journal ID: 4156 – Scopus EID: 2-s2.0-84880306152
Citation counts: Scopus - 2
DRO entry for this publication

Peng, Dezhong*, Xiang, Yong, Trinh, Hieu and Man, Zhihong* (2013) Adaptive blind equalization of time-varying SIMO systems driven by QPSK inputs, Digital signal processing : a review journal, vol. 23, no. 1, pp. 268-274, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4407 – Scopus EID: 2-s2.0-84869496660
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Pereira, Michael P., Weiss, Matthias, Rolfe, Bernard F. and Hilditch, Tim B. (2013) The effect of the die radius profile accuracy on wear in sheet metal stamping, International journal of machine tools and manufacture, vol. 66, pp. 44-53, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3606 – Scopus EID: 2-s2.0-84871738769
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Phat, V.N.* and Trinh, H. (2013) Design of H∞ control of neural networks with time-varying delays, Neural computing and applications, vol. 22, no. Supplement 1, pp. 323-331, Springer, Berlin, Germany [C1]
ERA journal ID: 18089 – Scopus EID: 2-s2.0-84877949653
Citation counts: Scopus - 1
DRO entry for this publication

Polishetty, Ashwin, Littlefair, Guy and Pasang, Timotius* (2013) A case study on effect of feed rate on machinability of austempered ductile iron, Advanced materials research, vol. 748, pp. 247-251, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84884807378
DRO entry for this publication

Pramanik, Alokesh*, Islam, M.N.*, Basak, Animesh* and Littlefair, Guy (2013) Machining and tool wear mechanisms during machining titanium alloys, Advanced materials research, vol. 651, pp. 338-343, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84873743820
Citation counts: Scopus - 5
DRO entry for this publication

Pramanik, Alokesh* and Littlefair, Guy (2013) Fabrication of nano-particle reinforced metal matrix composites, Advanced materials research, vol. 651, pp. 289-294, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-84873980354
DRO entry for this publication

Samad, Mst. Fateha and Kouzani, Abbas Z. (2013) Integrated microfluidic drug delivery devices : a component view, Microsystem technologies, vol. March, pp. 1-14, Springer, Berlin, Germany [C1]
ERA journal ID: 4497 – Scopus EID: 2-s2.0-84874932492
Citation counts: Scopus - 2
DRO entry for this publication

Sellamuthu, P., Collins, P.K., Hodgson, P.D. and Stanford, N. (2013) Correlation of tensile test properties with those predicted by the shear punch test, Materials and design, vol. 47, pp. 258-266, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4961 – Scopus EID: Not tagged
Citation counts: Thomson - 1
DRO entry for this publication

Shafiullah, G.M., M., T. Oo Amanullah, Ali, Shawkat* and Stojcevski, Alex (2013) Influences of wind energy integration into the distribution network, Journal of wind energy, vol. 2013, pp. 1-21, Hindawi Publishing Corporation, Philadelphia, Pa. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Tan, Yongjun and Liu, Tie* (2013) Inhibiting localized corrosion of aluminum and aluminum alloy by rare earth metal compounds : behaviors and characteristics observed using an electrochemically integrated multi-electrode array, Journal of the electrochemical society, vol. 160, no. 4, pp. C147-C158, Electrochemical Society, New York, N.Y. [C1]
ERA journal ID: 1476 – Scopus EID: 2-s2.0-84875716801
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Tan, Yongjun (2013) An overview of techniques for characterizing inhomogeneities in organic surface films and underfilm localized corrosion, Progress in organic coatings, vol. 76, no. 5, pp. 791-803, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1373 – Scopus EID: 2-s2.0-84875728347
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Teh, P.S.* and Trinh, H. (2013) Design of unknown input functional observers for nonlinear systems with application to fault diagnosis, Journal of process control, vol. 23, no. 8, pp. 1169-1184, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3906 – Scopus EID: 2-s2.0-84881406388
Citation counts: Scopus - 2, Thomson - 1
DRO entry for this publication

Tehranirokh, Masoomeh, Kouzani, Abbas Z., Francis, Paul S. and Kanwar, Jagat R. (2013) Generating different profiles of gradient concentrations inside a gel-filled chamber : design and simulation, Microsystem technologies, vol. 19, no. 4, pp. 623-628, Springer, Berlin, Germany [C1]
ERA journal ID: 4497 – Scopus EID: 2-s2.0-84866852240
Citation counts: Thomson - 1
DRO entry for this publication

Tehranirokh, Masoomeh, Kouzani, Abbas Z., Francis, Paul S. and Kanwar, Jagat R. (2013) Generating different profiles of gradient concentrations inside a gel-filled chamber : design and simulation, Microsystem technologies, vol. 19, no. 4, pp. 623-628, Springer, Berlin, Germany [C1]
ERA journal ID: 4497 – Scopus EID: 2-s2.0-84876504076
DRO entry for this publication

Tehranirokh, Masoomeh, Kouzani, Abbas Z., Francis, Paul S. and Kanwar, Jagat R. (2013) Microfluidic devices for cell cultivation and proliferation, Biomicrofluidics, vol. 7, pp. 1-32, AIP Publishing, Melville, N.Y. [C1]
ERA journal ID: 122820 – Scopus EID: 2-s2.0-84889633678
Citation counts: Scopus - 2
DRO entry for this publication

Trinh, Hieu, Fernando, Tyrone*, Iu, Herbert H.C.* and Wong, Kit Po* (2013) Quasi-decentralized functional observers for the LFC of interconnected power systems, IEEE transactions on power systems, vol. 28, no. 3, pp. 3513-3514, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 4461 – Scopus EID: 2-s2.0-84880916375
Citation counts: Scopus - 2
DRO entry for this publication

Wang, Jin, Liu, Ping*, She, Mary F.H., Nahavandi, Saeid and Kouzani, Abbas (2013) Bag-of-words representation for biomedical time series classification, Biomedical signal processing and control, vol. 8, no. 6, pp. 634-644, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3391 – Scopus EID: 2-s2.0-84880311136
Citation counts: Scopus - 1, Thomson - 2
DRO entry for this publication

Wang, Jin, Sun, Xiangping, She, Mary F.H., Kouzani, Abbas and Nahavandi, Saeid (2013) Unsupervised mining of long time series based on latent topic model, Neurocomputing, vol. 103, pp. 93-103, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 18092 – Scopus EID: 2-s2.0-84870388533
Citation counts: Scopus - 1, Thomson - 2
DRO entry for this publication

Wang, Jin, She, Mary, Nahavandi, Saeid and Kouzani, Abbas (2013) Human identification from ECG signals via sparse representation of local segments, IEEE signal processing letters, vol. 20, no. 10, pp. 937-940, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 4438 – Scopus EID: 2-s2.0-84881158122
Citation counts: Scopus - 1
DRO entry for this publication

Wang, Jin, Liu, Ping*, She, Mary F.H., Nahavandi, Saeid and Kouzani, Abbas (2013) Biomedical time series clustering based on non-negative sparse coding and probabilistic topic model, Computer methods and programs in biomedicine, vol. 111, no. 3, pp. 629-641, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 5039 – Scopus EID: 2-s2.0-84880602813
Citation counts: Scopus - 1, Thomson - 2
DRO entry for this publication

Wang, Ying and Hao, Hong* (2013) Damage identification of slab–girder structures: experimental studies, Journal of civil structural health monitoring, vol. 3, no. 2, pp. 93-103, Springer, Berlin, Germany [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Wang, Ying, Khoo, Suiyang, Li, An-jui and Hao, Hong* (2013) FEM calibrated ARMAX model updating method for time domain damage identification, Advances in structural engineering, vol. 16, no. 1, pp. 51-60, Multi-Science Publishing, Brentwood, England [C1]
ERA journal ID: 4147 – Scopus EID: 2-s2.0-84874345525
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Wiebenga, J.H.*, Weiss, M., Rolfe, B. and Van Den Boogaard, A.H.* (2013) Product defect compensation by robust optimization of a cold roll forming process, Journal of materials processing technology, vol. 213, no. 6, pp. 978-986, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-84873978941
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Will, Frank (2013) Comparison of advanced waste heat recovery systems with a novel oil heating system, International journal of automotive technology, vol. 4, no. 2, pp. 33-40, Society of Automotive Engineers of Japan, Tokyo, Japan [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yan, D.P., Hilditch, T., Kishawy, H.A.* and Littlefair, G. (2013) On quantifying the strain rate during chip formation when machining aerospace alloy Ti-5553, Procedia CIRP 8, vol. 8, pp. 123-128, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 2
DRO entry for this publication

Yin, Juliang*, Wang, Wenyi*, Man, Zhihong* and Khoo, Suiyang (2013) Modeling and analysis of gear tooth crack growth under variable - amplitude loading, Mechanical systems and signal processing, vol. 40, no. 1, pp. 105-113, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3705 – Scopus EID: 2-s2.0-84881318519
Citation counts: Scopus - 1
DRO entry for this publication

Yousefi, Ashkan*, Iu, Herbert Ho-Ching*, Fernando, Tyrone* and Trinh, Hieu (2013) An approach for wind power integration using demand side resources, IEEE transactions on sustainable energy, vol. 4, no. 4, pp. 917-924, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 123776 – Scopus EID: 2-s2.0-84876676519
DRO entry for this publication

Zhang, Huan* and Pathirana, Pubudu N. (2013) Uplink power control via adaptive Hidden-Markov-Model-Based pathloss estimation, IEEE transactions on mobile computing, vol. 12, no. 4, pp. 657-665, IEEE, Piscataway, N.J. [C1]
ERA journal ID: 5073 – Scopus EID: 2-s2.0-84874628876
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Asgari, Alireza, Ghadbeigi, Hassan*, Pinna, Chrostophe* and Hodgson, Peter D. (2013) Multiscale modelling of stress and strain partitioning in high strength dual phase steels, Computer methods in materials science, vol. 12, pp. 163-174, AKAPIT, Lodz, Poland [C2]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Jegatheesan, Veeriah, Shu, Li, Shon, Ho Kyong*, Tsuzuki, Takuya* and Tung, Kuo-Lun* (2013) Preface : Special issue on the Challenges in Environmental Science and Engineering, CESE-2012 : September 9-13, 2012, Melbourne, Australia, Bioresource technology, vol. 141, p. 1, Elsevier, Amsterdam, The Netherlands [C4]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84878974521
DRO entry for this publication

Jegatheesan, Jega V., Boopathy, Ramraj*, Shu, Li, Zakaria, Zainul* and Sathasivan, Arumugam* (2013) Editorial : Special issue on the challenges in environmental science and engineering, CESE-2012: 9-13, Sept., RACV City Club, Melbourne, Australia, International biodeterioration and biodegradation, vol. 85, pp. 458-459, Elsevier, Amsterdam, The Netherlands [C4]
ERA journal ID: 3414 – Scopus EID: 2-s2.0-84886294760
DRO entry for this publication

Abdollahpoor, Amir, Chen, Xiangjun*, Pereira, Michael, Asgari, Alireza, Xiao, Namin* and Rolfe, Bernard (2013) Applying a modified austenite transformation model into a thermo-mechanical model of hot stamping, in Unknown (ed.), IDDRG 2013 : Proceedings of the International Deep-Drawing Research Group. Conference, pp. 155-160, Institute of Virtual Manufacturing, Zurich, Switzerland [E1]
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) A first step towards in-line shape compensation for roll forming applications, in unknown (ed.), IDDRG 2013 : Proceedings of the 2013 International Deep-Drawing Research Group annual conference, pp. 93-97, IDDRG, Zurich, Switzerland [E1]
DRO entry for this publication

Ahmed, S. F.*, Khan, M. M. K.*, Amanullah, M. T. O., Rasul, M. G.* and Hassan, N. M. S.* (2013) Thermal performance analysis of earth pipe cooling system for subtropical climate, in Unknown (ed.), SET 2013 : Sustainable Energy Technologies 2013 conference, pp. 1-9, The Conference, Hong Kong, China [E1]
DRO entry for this publication

Arisoy, Hayrettin, Stojcevski, Alex and M., Than Oo Aman (2013) Integration of technical equipment in a project driven learning environment, in Unknown (ed.), IETEC 2013 : Proceedings of the 2nd International Engineering and Technology Education Conference, pp. 1-8, University of Technical Education, Ho Chi Minh City, Vietnam [E1]
DRO entry for this publication

Ay, Ali Mete, Wang, Ying, Khoo, Sui Yang and Li, An-Jui (2013) Vibration based damage identification of a scale-model steel frame structure subjected to bolt connection failures, in Xu, Y. L.; Zhu, S.; Xia, Y.; Ni, Y. Q.; Law, S. S.; Yin, J. H. and Su, Z. Q. (eds), SHMII-6 2013 : Proceedings of the Structural Health Monitoring of Intelligent Infrastructure 2013 international conference, pp. 1-9, Hong Kong Polytechnic University, Hong Kong, China [E1]
DRO entry for this publication

Badr, Ossama Mamdouh, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) The numerical investigation of the material behavior of high strength sheet materials in incremental forming, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMIFORM 2013 : Proceedings of Numerical Methods in Industrial Forming Processes 2013 international conference, pp. 513-519, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Cavenett, Simon and Rawson, Chris (2013) Combining information literacy development and teamwork through authentic assessment, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-8, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Chandran, Jaideep, Chandrasekaran, Sivachandran and Stojcevski, Alex (2013) Integration of cloud based learning in project oriented design based learning, in Mohd-Yusof, Khairiyah; Arsat, Mahyuddin; Borhan, Mohamad Termizi; de Graaff, Erik; Kolmos, Anette and Phang, Fatin Aliah (eds), IRSPBL 2013 : PBL Across Cultures : Proceedings of The 4th International Research Symposium on Problem-Based Learning, pp. 358-363, Aalborg University Press, Aalborg, Denmark [E1]
DRO entry for this publication

Chandrasekaran, Sivachandran, Stojcevski, Alex, Littlefair, Guy and Joordens, Matthew (2013) Aligning students and staff perspectives in an engineering design curriculum, in Unknown (ed.), REES 2013 : Proceedings of the 2013 Research in Engineering Education Symposium, Universiti Teknologi Malaysia, Kuala Lumpur, Malaysia [E1]
DRO entry for this publication

Chandrasekaran, Sivachandran, Than Oo, Amanullah M.*, Stojcevski, Alex and Littlefair, Guy (2013) Best assessment practices of final year engineering projects in Australia, in Patil, Arun; Puteh, Marlia and Sid Nair, Chenicheri (eds), IETEC 2013 : Proceedings of the International Engineering and Technology Education Conference 2013, pp. 1-17, University of Technical Education, Ho Chi Minh City, Ho Chi Minh City, Vietnam [E1]
DRO entry for this publication

Chandrasekaran, Sivachandran, Stojcevski, Alex, Littlefair, Guy and Joordens, Matthew (2013) Project oriented design based learning – staff perspectives, in Mohd-Yusof, Khairiyah; Arsat, Mahyuddin; Borhan, Mohamad Termizi; de Graaff, Erik; Kolmos, Anette and Phang, Fatin Aliah (eds), Proceedings of 4th International Research Symposium on PBL; IRSPBL 2013, pp. 389-394, Aalborg University, Kuala Lumpur, Malaysia [E1]
DRO entry for this publication

Chandrasekaran, Sivachandran, Stojcevski, Alex, Littlefair, Guy and Joordens, Matthew (2013) Design based learning – student's views on industry requirements, in van Hattum-Janssen, Natascha; Lima, Rui M.; Carvalho, Dinis; Fernandes, Sandra; Sousa, Rui M.; Moreira, Francisco; Alves, Anabela and Mesquita, Diana (eds), Proceedings of 5th International Symposium on Project Approaches in Engineering Education; PAEE 2013, pp. ID 56.1-ID 56.8, Project Approaches in Engineering Education, Portugal [E1]
DRO entry for this publication

Chandrasekaran, Sivachandran, Stojcevski, Alex, Littlefair, Guy and Joordens, Matthew (2013) Accreditation inspired project oriented design based learning curriculum for engineering education, in Patil, Arun; Puteh, Marlia and Sid Nair, Chenicheri (eds), IETEC 2013 : Enhancing Global Engineering and Technology Education: Meeting the Future : Proceedings of the 2nd International Engineering and Technology Education Conference 2013, pp. 1-11, University of Technical Education, Ho Chi Minh City, Ho Chi Minh City, Vietnam [E1]
DRO entry for this publication

Chandrasekaran, Sivachandran, Stojcevski, Alex, Littlefair, Guy and Joordens, Matthew (2013) A comparative study of students’ perceptions of Project Oriented Design Based Learning in Engineering education, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-9, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Cvetkovic, Dean* and Chandran, Jaideep (2013) Clicker approach in engineering design classrooms, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-12, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Cvetkovic, Dean* and Chandran, Jaideep (2013) Online self and critical reflective journal approach : a collaborative learning in engineering design, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-13, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Emami, Kianoush*, Nener, Brett*, Sreeram, Victor*, Trinh, Hieu and Fernando, Tyrone* (2013) A fault detection technique for dynamical systems, in Unknown (ed.), ICIIS 2013 : Proceedings of the 2013 IEEE 8th International Conference on Industrial and Information Systems, pp. 1-6, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Gordon, Eloise, Joordens, Matthew and Stojcevski, Alex (2013) Effective technology to support cooperative learning in a virtual learning environment, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-8, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Hao, Y. F.*, Hao, H.* and Wang, Ying (2013) Experimental study of dynamic compressive behaviour of concrete material reinforced with spiral steel fibres, in Lok, Tat Seng and Carper, E. K. L. (eds), SI13 : Proceedings of the 10th International Conference on Shock & Impact Loads on Structures 2013, pp. 343-352, Conference Secretariat, Singapore [E1]
DRO entry for this publication

Horan, Ben, Joordens, Matthew, Hall, Robynne and Stojcevski, Alex (2013) The old and the new : student perceived efficacy of electronics laboratory equipment, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th Australasian Association for Engineering Education Conference 2013, pp. 1-12, Griffith School of Engineering, Griffith University, Gold Coast, Queensland [E1]
DRO entry for this publication

Hosain, Md Kamal, Kouzani, Abbas Z. and Jaberzadeh, Shapour* (2013) Design and analysis of an antenna for batteryless transcranial direct current stimulation devices, in Unknown (ed.), Proceedings of the 2013 IEEE International Conference on Ultra-Wideband; IEEE 2013, pp. 27-30, IEEE, Piscataway, NJ [E1]
DRO entry for this publication

Hosain, Md Kamal and Kouzani, Abbas Z. (2013) Electromagnetic energy harvesting in a head-mountable DBS device using a circular PIFA, in Unknown (ed.), ICME 2013 : Proceedings of the International Conference on Complex Medical Engineering (CME), pp. 541-546, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Hosain, Md Kamal and Kouzani, Abbas Z. (2013) Design and analysis of efficient rectifiers for wireless power harvesting in DBS devices, in Unknown (ed.), ICIEA 2013 : Proceedings of the 8th IEEE Conference on Industrial Electronics and Applications, pp. 651-655, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Hosain, Md Kamal, Kouzani, Abbas Z., Tye, Susannah J.*, Abulseoud, Osama A.* and Berk, Michael (2013) Design and analysis of an antenna for wireless energy harvesting in head-mountable DBS device, in Unknown (ed.), EMBC 2013 : Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 3078-3081, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Islam, Md. Saiful and Kouzani, Abbas Z. (2013) Variable incidence angle subwavelength grating SPR graphene biosensor, in Unknown (ed.), EMBC 2013 : Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 3024-3027, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Khoo, Suiyang, Yin, Juliang* and Man, Zhihong* (2013) Finite-time stabilization of a class of high-order stochastic nonlinear systems, in Unknown (ed.), CCC 2013 : Proceedings of the 2013 Chinese Control Conference, pp. 1637-1641, IEEE, Piscataway, N. J. [E1]
DRO entry for this publication

Kipli, Kuryati and Kouzani, Abbas Z. (2013) An algorithm for determination of rank and degree of contribution of sMRI volumetric features in depression detection, in Unknown (ed.), EMBC 2013 : Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 1382-1385, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Kipli, Kuryati, Kouzani, Abbas Z. and Xiang, Yong (2013) An empirical comparison of classification algorithms for diagnosis of depression from brain sMRI scans, in Unknown (ed.), ACSAT 2013 : Proceedings of the 2nd International Conference on Advanced Computer Science Applications and Technologies. 2013, pp. 333-336, IEEE Computer Society, Sarawak, Malaysia [E1]
DRO entry for this publication

Kipli, Kuryati, Kouzani, Abbas Z. and Joordens, Matthew (2013) Evaluation of feature selection algorithms for detection of depression from brain sMRI scans, in Unknown (ed.), ICME 2013 : Proceedings of the International Conference on Complex Medical Engineering (CME), pp. 64-69, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Kumari, Apurv, Hodgson, Peter, Gao, Weimin, Fabijanic, Daniel and Das, Subrat (2013) Drag models comparison by single injection in vacuum fluidised beds, in Unknown (ed.), ICMF 2013 : Proceedings of the International Conference on Multiphase Flow, pp. 1-6, ICMF, Jeju, Korea [E1]
DRO entry for this publication

Lee, Jeng-Dao*, Lu, Jia-Qi* and Khoo, Suiyang (2013) Exact-estimator-based terminal sliding mode control system design, in Unknown (ed.), ASCC 2013 : Proceedings of the 2013 9th Asian Control Conference, pp. 1-6, The Conference, Istanbul, Turkey [E1]
DRO entry for this publication

Lee, Jeng-Dao*, Khoo, Suiyang and Wang, Zhi-Bin* (2013) Backstepping-based current and voltage control strategy for maglev position device, in Zucker, Gerhard and Nogueiras, Andrés Meléndez Augusto (eds), IECON 2013 : Proceedings of the IEEE Industrial Electronics Society 2013 annual conference, pp. 3341-3346, IEEE, Piscataway, N. J. [E1]
DRO entry for this publication

Lee, Yee Siong, Pathirana, Pubudu N., Caelli, Terry* and Evans, R.* (2013) Doppler radar in respiratory monitoring : detection and analysis, in Unknown (ed.), Proceedings of the 2nd International Conference on Control Automation and Information Sciences; ICCAIS 2013, pp. 199-203, IAMI, Nha Trang, Vietnam [E1]
DRO entry for this publication

Lee, Yee Siong, Pathirana, Pubudu N., Caelli, Terry* and Li, Saiyi (2013) Further applications of doppler radar for non-contact respiratory assessment, in Unknown (ed.), EMBC 2013 : Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, pp. 3833-3836, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Leong, Wei Yin, Trinh, Hieu and Fernando, Tyrone* (2013) Design of distributed functional observers for interconnected time-delay systems, in Unknown (ed.), ICIIS 2013 : Proceedings of the 2013 IEEE 8th International Conference on Industrial and Information Systems, pp. 191-196, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Li, A.J., Qian, Z. G., Kong, V.* and Lyamin, A.V.* (2013) Comparisons of seismic rock slope stability assessments between the Hoek-Brown and Mohr-Coulomb failure criteria, in Samali, Bijan (eds), ACMSM22 2012 : Materials to structures, advancement through innovation : Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, pp. 1-6, CRC Press, London, England [E1]
DRO entry for this publication

Li, Saiyi, Caelli, Terry*, Ferraro, Mario* and Pathirana, Pububu N. (2013) A novel bio-kinematic encoder for human exercise representation and decomposition - Part 2 : Robustness and Optimisation, in Unknown (ed.), Proceedings of the 2nd International Conference on Control Automation and Information Sciences; ICCAIS 2013, pp. 30-35, IAMI, Nha Trang, Vietnam [E1]
DRO entry for this publication

Li, Saiyi, Caelli, Terry*, Ferraro, Mario* and Pathirana, Pububu N. (2013) A novel bio-kinematic encoder for human exercise representation and decomposition - Part 1 : Indexing and modelling, in Unknown (ed.), Proceedings of the 2nd International Conference on Control Automation and Information Sciences; ICCAIS 2013, pp. 24-29, IAMI, Nha Trang, Vietnam [E1]
DRO entry for this publication

Long, John, Chenery, Kenneth L., Stannard, Warren B. and Fitzgerald, Kristine J. (2013) Use of web-conferencing software to enhance practical learning for distance students in a first-year Engineering course, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-10, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Lyons, Liam, Joordens, Matthew and Warmington, Stuart (2013) Vascular occlusion training as an alternate method of gaining muscle, in Unknown (ed.), Proceedings of the 8th International Conference on System of Systems Engineering; SoSE 2013, pp. 196-201, IEEE, Piscataway, NJ [E1]
DRO entry for this publication

Mafinejad, Yasser, Zarghami, Majid* and Kouzani, Abbas Z. (2013) Design and simulation of high isolation RF MEMS shunt capacitor switch for C-K band, in Taherzadeh, Mohammad (eds), ICEE 2013 : Proceedings of the 2013 Electrical Engineering Iranian Conference, pp. 1-5, IEEE, Piscataway, N. J. [E1]
DRO entry for this publication

Mafinejad, Yasser and Kouzani, A.Z. (2013) RF techniques for lowering the actuation voltage of RF MEMS shunt capacitor switch for C-K band, in Unknown (ed.), Proceedings of the 14th Annual Conference on Wireless and Microwave Technology; IEEE 2013, pp. 1-3, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Nepal, Kali P. and Jenkins, Graham A.* (2013) Graduating students’ experience of learning approaches and their perceptions of teaching quality in a new undergraduate Civil Engineering course, in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, pp. 1-9, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E1]
DRO entry for this publication

Mto, Amanullah and Stojcevski, Alex (2013) Development and delivery of the appropriate assessments items for power systems related PBL subjects, in Mohd-Yusof, Khairiyah; Arsat, Mahyuddin; Borhan, Mohamad Termizi; De Graaff, Erik; Kolmos, Anette and Phang, Fatin Aliah (eds), IRSPBL 2013 : Proceedings of the Problem-Based Learning 2013 International Research Symposium, pp. 117-119, Aalborg University, Aalborg, Denmark [E1]
DRO entry for this publication

Maung, Than Oo Amanullah, Stojcevski, Alex and Chandran, Jaideep (2013) Technology integration in project oriented design based learning for distance education, in Unknown (ed.), IETEC 2013 : Proceedings of the 2013 2nd International Engineering and Technology Education Conference, pp. 1-10, The Conference, Ho Chi Minh City, Vietnam [E1]
DRO entry for this publication

Pledger, Peter J.*, Maung Than Oo, Aman and Gannon, Jennifer* (2013) Impacts of DG penetration in the Bamaga and Gununa isolated distribution networks, in Unknown (ed.), AUPEC 2013 : Proceedings of the 2013 Australasian Universities Power Engineering Conference, pp. 1-5, Australasian Universities Power Engineering Conference, Hobart, Tas. [E1]
DRO entry for this publication

Polishetty, Ashwin, Littlefair, Guy, Musselwhite, Thomas and Sonavane, Chinmay* (2013) A preliminary study on machinability assessment of nanobainite steel, in unknown (ed.), IMECE 2013 : Advanced Manufacturing : Proceedings of the ASME International Mechanical Engineering Congress & Exposition, pp. 1-6, ASME, New York, NY [E1]
DRO entry for this publication

Polishetty, Ashwin, Manoharan, Vignesh*, Littlefair, Guy and Sonavane, Chinmay* (2013) Machinability assessment of Ti-6Al-4V for aerospace applications, in Durbetaki, Pandeli and Donnell, Jeffrey (eds), ASME District F-ECTC 2013 : Proceedings of the ASME District F- Early Career technical conference, pp. 53-58, ASME, New York, N. Y. [E1]
DRO entry for this publication

Samad, M. F., Kouzani, A. Z. and Samad, M* (2013) Design and analysis of a low actuation voltage electrowetting-on-dielectric device, in Unknown (ed.), ICME 2013 : Proceedings of the International Conference on Complex Medical Engineering (CME), pp. 513-517, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Shafiullah, G.M., Maung Than Oo, Amanullah and Stojcevski, Alex (2013) Voltage regulation in renewable energy integration into the distribution network, in Unknown (ed.), AUPEC 2013 : Proceedings of the 2013 Australasian Universities Power Engineering Conference, pp. 1-6, Australasian Universities Power Engineering Conference, Hobart, Tas. [E1]
DRO entry for this publication

Sonavane, Chinmay*, Polishetty, Ashwin and Littlefair, Guy (2013) Machinability and phase transformation study of nanobainite steels, in Durbetaki, Pandeli and Donnell, Jeffrey (eds), ASME District F-ECTC 2013 : Proceedings of the ASME District F- Early Career technical conference, pp. 41-45, ASME, New York, N. Y. [E1]
DRO entry for this publication

Tay, Fei Siang*, Man, Zhihong*, Jin, Jiong*, Khoo, Sui Yang, Zheng, Jinchuan* and Wang, Hai* (2013) Sliding mode based learning control for interconnected systems, in Unknown (ed.), ICIEA 2013 : Proceedings of the 8th IEEE Conference on Industrial Electronics and Applications, pp. 816-821, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Trinh, H., Fernando, T.*, Emami, K.* and Huong, D.C.* (2013) Fault detection for dynamical systems using first-order functional observers, in Unknown (ed.), ICIIS 2013 : Proceedings of the 2013 IEEE 8th International Conference on Industrial and Information Systems, pp. 1-4, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Vinayagam, Arangarajan, Stojcevski, A., Oo, Amanullah M.T. and Shafiullah, G.M. (2013) Prospect of renewable energy sources and integrating challenges in Victoria, Australia, in Unknown (ed.), AUPEC 2013 : Australasian Universities Power Engineering Conference, pp. 1-6, The Conference, Hobart, Tas. [E1]
DRO entry for this publication

Wang, Bin*, Truong, Nguyen-Vu*, Brogliato, Bernard* and Khoo, Suiyang (2013) The oscillation behaviors in Euler discretized terminal sliding mode control systems, in Vu, Duc-Lung (eds), ICCAIS 2013 : Proceedings of the Control Automation and Information Sciences 2013 International Conference, pp. 201-205, IEEE, Piscataway, N. J. [E1]
DRO entry for this publication

Wang, Ying and Hao, Hong* (2013) Generalised damage identification scheme via sparse representation, in Xu, Y. L.; Zhu, S.; Xia, Y.; Ni, Y. Q.; Law, S. S.; Yin, J. H. and Su, Z. Q. (eds), SHMII-6 2013 : Proceedings of The 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure 2013, pp. 1-8, Hong Kong Polytechnic University, Hong Kong, China [E1]
DRO entry for this publication

Wang, Ying and Zhang, T* (2013) Finite element model updating using estimation of distribution algorithm, in Xu, Y. L.; Zhu, S.; Xia, Y.; Ni, Y. Q.; Law, S. S.; Yin, J. H. and Su, Z. Q. (eds), SHMII-6 2013 : Proceedings of The 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure, pp. 1-8, Hong Kong Polytechnic University, Hong Kong [E1]
DRO entry for this publication

Yan, Z., Li, A.J. and Merifield, R.S.* (2013) Slope stability analysis for cohesive materials filled on purely cohesive undrained clay, in Leung, C.F.; Goh, S.M. and Shen, R.F. (eds), 18SEAGC/1AGSSEA 2013 : Proceedings of the 18th Southeast Asian Geotechnical Conference cum Inaugural AGSSEA Conference, pp. 519-524, Research Publishing, Singapore [E1]
DRO entry for this publication

Zhao, Shengkui*, Jones, Douglas L.*, Man, Zhihong* and Khoo, Suiyang (2013) A variable step-size transform-domain LMS algorithm based on minimum mean-square deviation for autoregressive process, in Unknown (ed.), ICIEA 2013 : Proceedings of the 8th IEEE Conference on Industrial Electronics and Applications, pp. 968-971, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Al-Kharabsheh, B., Baiuk, A., Al-Ameri, R. and Fox, B. (2013) Improving performance of CFRP retrofitted RC members using rubber modified epoxy (ongoing research), in Al-Mahaidi, Riadh; Zhao, Xiao-Ling; Smith, Scott T. and Bai, Yu (eds), APFIS 2013 : Proceedings of the Fourth Asia-Pacific Conference on FRP in Structures 2013, pp. 1-6, International Institute for FRP in Construction, Melbourne, Vic. [E1.1]
DRO entry for this publication

Basher, Hassan, Stojcevski, Alex and Oo, Aman Than (2013) Development of distributed energy systems for Middle East Countries, in Unknown (ed.), Proceedings of the 2013 Sustainable Development Conference, pp. 1-25, The Conference, Bangkok, Thailand [E2]
DRO entry for this publication

Jiao, Jingsi, Rolfe, Bernard, Mendiguren, Joseba*, Galdos, Lander* and Weiss, Matthias (2013) The effect of process parameters on web-warping in the flexible roll forming of UHSS, in Unknown (ed.), TTP 2013: Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference, pp. 1-10, The Conference, Graz, Austria [E2]
DRO entry for this publication

Mafinejad, Yasser, Zarghami, Majid*, Kouzani, Abbas Z. and Mafinezhad, Khalil* (2013) Impact of carbon material on RF MEMS switch, in Unknown (ed.), ICEE 2013 : Proceedings of the 2013 21st Iranian Conference on Electrical Engineering, pp. 1-4, IEEE, Piscataway, N.J. [E2]
DRO entry for this publication

Malekjani, Shokoufeh, Hodgson, Peter D., Stanford, Nicole E. and Hilditch, Timothy B. (2013) A comparison of low cycle fatigue behaviour of UFG Al produced by different rolling techniques, in Unknown (ed.), TMS 2013 : 142nd Annual Meeting & Exhibition : Annual Meeting Supplemental Proceedings, pp. 413-419, Wiley - Blackwell, Hoboken, NJ [E2]
DRO entry for this publication

Mortazavi, Daryoush, Kouzani, Abbas Z. and Matekovits, Ladislau* (2013) Localized surface plasmon resonance in nano-sinusoid arrays, in Unknown (ed.), iWAT 2013 : Proceedings of the International Workshop on Antenna Technology, pp. 113-116, IEEE, Piscataway, N.J. [E2]
DRO entry for this publication

Pereira, Michael P., Weiss, Matthias and Rolfe, Bernard F. (2013) Towards tool life precition in sheet metal stamping, in Unknown (ed.), TTP 2013 : Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference, pp. 1-10, The Conference, Graz, Austria [E2]
DRO entry for this publication

Abulseoud, Osama A.*, Ruby, Christina L.*, Kale, Rajas*, Ahmed, Ahmed*, Tye, Susannah*, Kouzani, Abbas, Lee, Kendall*, Frye, Mark* and Choi, Doo Sup* (2013) The impact of continuous versus intermittent high frequency stimulation of the nucleus accumbens shell on ethanol preference and circadian locomotor activity in alcohol preferring rats, in Krystal, John (eds), Neuroplasticity and the Changing Brain: Development, Pathobiology & Therapeutics : Abstracts of the 68th Society of Biological Psychiatry Annual Meeting 2013, pp. 151S-152S, Elsevier, New York, NY [E3]
DRO entry for this publication

Badr, Ossama Mamdouth, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2013) Manufacturing structural components made of Ti-6AI-4V at room temperature, in Unknown (ed.), AeroMat 2013 : Proceedings of the 24th Advanced Aerospace Materials and Processes Conference and Exposition, p. 1, AeroMat, Bellevue, Washj. [E3]
DRO entry for this publication

Hurren, C. J., Erceg, A., Li, Q. and Wang, X. G. (2013) Abrasion skin shear measurement of textile fabrics, in Unknown (ed.), 2013 : Innovative and functional textiles : Book of Abstracts of the Istanbul Textile 2013 congress, pp. 1-4, Ege reklam basim sanatlan san, Istanbul, Turkey [E3]
DRO entry for this publication

Long, John (2013) Recent advances in distance education for physics students, in Unknown (ed.), ACSME 2013 : Proceedings of the Australian Conference on Science & Mathematics Education, p. 47, UniServe Science, The University of Sydney, Sydney, N.S.W. [E3]
DRO entry for this publication

Rasul, Mohammad G.*, Nouwens, Fons*, Lawson, Justine*, Howard, Prue*, Martin, Fae*, Hadgraft, Roger*, Kestell, Colin*, Anwar, Faisal*, Henderson, Alan*, Stojcevski, Alex, Littlefair, Guy and Jarman, Rob* (2013) Development of learning and teaching standards of Final Year Engineering Projects (FYEPs), in Lemckert, Charles; Jenkins, Graham and Lang-Lemckert, Susan (eds), AAEE 2013 : Proceedings of the 24th 2013 Australasian Association for Engineering Education Conference, p. 178, Griffith School of Engineering, Griffith University, Brisbane, Qld. [E3]
DRO entry for this publication

El-Osery, Aly* and Joordens, Mathew (2013) Message from the program chairs, in El-Osery, Aly and Joordens, Mathew (eds), IEEE, Piscataway, N.J. [E4]
DRO entry for this publication

Will, Frank (2013) Elastisch ausknickende Federstange, Elastisch ausknickende Federstange, Ino8 Pty Ltd, Germany (5) [I]
DRO entry for this publication

Will, Frank (2013) Tilt control for tilting vehicles, Tilt control for tilting vehicles, Ino8 Pty Ltd, Europe (EPO only) (3) [I]
DRO entry for this publication

Jones, Cheryl* and Will, Frank (Contibutor) (2013) Winner's technology designed to slash fuel consumption in vehicles - Innovation challenge, in Will, Frank (eds), The Australian, p. 2, Nationwide News, Canberra, A.C.T. [M]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2013

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Sunday 23rd November 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010