Research Services Division

Deakin Research

2014 School of Engineering Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) An experimental investigation of edge strain and bow in roll forming a V-section, Materials science forum, vol. 773-774, pp. 153-159, Trans Tech Publications, Durnten-Zurich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Bonacci, Jason, Vicenzino, Bill*, Spratford, Wayne* and Collins, Paul (2014) Take your shoes off to reduce patellofemoral joint stress during running, British journal sports medicine, vol. 48, no. 6, pp. 425-428, BMJ Group, London, England [C1]
ERA journal ID: 9744 – Scopus EID: 2-s2.0-84896402577
Citation counts: Scopus - 1
DRO entry for this publication

Chandrasekaran, Sivachandran, Littlefair, Guy, Joordens, Matthew and Stojcevski, Alex (2014) Cloud-linked and campus-linked students’ perceptions of collaborative learning and design based learning in engineering, International journal of digital information and wireless communications, vol. 4, no. 3, pp. 1-9, Society of Digital Information and Wireless Communications, Kowloon, Hong Kong [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Das, Subrat, Morsi, Yos* and Brooks, Geoffrey* (2014) Cathode characterization with steel and copper collector bars in an electrolytic cell, JOM: the journal of the minerals, metals & materials society, vol. 66, no. 2, pp. 235-244, Springer, Berlin, Germany [C1]
ERA journal ID: 4030 – Scopus EID: 2-s2.0-84893820203
DRO entry for this publication

Ganji, Behnam, Kouzani, Abbas Z., Khoo, Sui Yang and Shams-Zahraei, Mojtaba (2014) Adaptive cruise control of a HEV using sliding mode control, Expert systems with applications, vol. 41, no. 2, pp. 607-615, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 17852 – Scopus EID: 2-s2.0-84882340755
Citation counts: Thomson - 1
DRO entry for this publication

Ghanbari, Ali*, Horan, Ben, Nahavandi, Saeid, Chen, Xiao Qi* and Wang, Wenhui* (2014) Haptic microrobotic cell injection system, IEEE systems journal, vol. 8, no. 2, pp. 371-383, IEEE, Piscataway, N.J. [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 1
DRO entry for this publication

Kumar, Apurv, Hodgson, Peter, Gao, Weimin, Das, Subrat and Fabijanic, Dan (2014) Investigating the effect of segregation of particles and pressure gradient on the quality of fluidisation at sub-atmospheric pressures, Powder technology, vol. 254, pp. 137-149, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3918 – Scopus EID: 2-s2.0-84893106930
Citation counts: Scopus - 1
DRO entry for this publication

Liyanaarachchi, S., Jegatheesan, V., Shu, L., Muthukumaran, S.* and Baskaran, K. (2014) A preliminary study on the volume reduction of pre-treatment sludge in seawater desalination by forward osmosis, Desalination and water treatment, vol. 52, no. 4-6, pp. 556-563, Taylor & Francis, Hopkinton, Mass. [C1]
ERA journal ID: 41476 – Scopus EID: 2-s2.0-84881513880
DRO entry for this publication

Lou, Yanshan*, Yoon, Jeong Whan and Huh, Hoon* (2014) Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality, International journal of plasticity, vol. 54, pp. 56-80, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4909 – Scopus EID: 2-s2.0-84883462885
DRO entry for this publication

Mehmood, Tariq, Kaynak, Akif, Dai, Xiujuan J., Kouzani, Abbas, Magniez, Kevin, Rubin de Celis, David, Hurren, Christopher J. and du, Plessis Johan* (2014) Study of oxygen plasma pre-treatment of polyester fabric for improved polypyrrole adhesion, Materials chemistry and physics, vol. 143, no. 2, pp. 668-675, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4965 – Scopus EID: 2-s2.0-84885346138
Citation counts: Thomson - 2
DRO entry for this publication

Mortimer, Michael, Horan, Ben and Stojcevski, Alex (2014) Design for manufacture of a low-cost haptic degree-of-freedom, International journal of electronics and electrical engineering, vol. 2, no. 2, pp. 85-89, Engineering and Technology Publishing, Rowland Heights, California [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Muthukumaran, Shobha*, Jegatheesan, Jega V. and Baskaran, Kanagaratnam (2014) Comparison of fouling mechanisms in low-pressure membrane (MF/UF) filtration of secondary effluent, Desalination and water treatment, vol. 52, no. 4-6, pp. 650-662, Taylor & Francis, Hopkinton, Mass. [C1]
ERA journal ID: 41476 – Scopus EID: 2-s2.0-84881503479
DRO entry for this publication

Muthukumaran, Shobha* and Baskaran, Kanagaratnam (2014) Comparison of the performance of ceramic microfiltration and ultrafiltration membranes in the reclamation and reuse of secondary wastewater, Desalination and water treatment, vol. 52, no. 4-6, pp. 670-677, Taylor & Francis, Hopkinton, Mass. [C1]
ERA journal ID: 41476 – Scopus EID: 2-s2.0-84881532713
DRO entry for this publication

Navaratna, D.*, Shu, L. and Jegatheesan, V. (2014) Performance of a laboratory-scale membrane bioreactor consisting mixed liquor with aquatic worms under toxic conditions, Bioresource technology, vol. 155, pp. 41-49, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3454 – Scopus EID: 2-s2.0-84892144951
DRO entry for this publication

Pandey, Santosh Raj, Jegatheesan, Veeriah, Baskaran, Kanagaratnam, Shu, Li and Muthukumaran, Shobha* (2014) Performance of reverse osmosis (RO) for water recovery from permeates of membrane bio-reactor (MBR), Desalination and water treatment, vol. 52, no. 4-6, pp. 600-611, Taylor & Francis, Hopkinton, Mass. [C1]
ERA journal ID: 41476 – Scopus EID: 2-s2.0-84881495444
DRO entry for this publication

Phat, V.N.*, Fernando, T.* and Trinh, H. (2014) Observer-based control for time-varying delay neural networks with nonlinear observation, Neural computing and applications, vol. 24, no. 7-8, pp. 1639-1645, Springer, Berlin, Germany [C1]
ERA journal ID: 18089 – Scopus EID: 2-s2.0-84875687394
DRO entry for this publication

Safaei, Mohsen*, Yoon, Jeong Whan and De Waele, Wim* (2014) Study on the definition of equivalent plastic strain under non-associated flow rule for finite element formulation, International journal of plasticity, vol. 58, pp. 219-238, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4909 – Scopus EID: 2-s2.0-84885964798
DRO entry for this publication

Sarvghad-Moghaddam, M.*, Parvizi, R., Davoodi, A.*, Haddad-Sabzevar, M.* and Imani, A.* (2014) Establishing a correlation between interfacial microstructures and corrosion initiation sites in Al/Cu joints by SEM-EDS and AFM-SKPFM, Corrosion science, vol. 79, pp. 148-158, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4761 – Scopus EID: 2-s2.0-84890249008
Citation counts: Scopus - 1
DRO entry for this publication

Shurvell, Thomas, Keir, Greg, Jegatheesan, Veeriah, Shu, Li and Farago, Leanne (2014) Removal of ametryn through nanofiltration and reverse osmosis, Desalination and water treatment, vol. 52, no. 4-6, pp. 643-649, Taylor & Francis, Hopkinton, Mass. [C1]
ERA journal ID: 41476 – Scopus EID: 2-s2.0-84881488442
DRO entry for this publication

Tan, Y.J. and Aung, N.N.* (2014) Quantifying the efficiency and understanding the mechanism of localised corrosion inhibition using the wire beam electrode, Materials and corrosion, vol. 65, no. 5, pp. 457-465, Wiley, Weinheim,Germany [C1]
ERA journal ID: 4803 – Scopus EID: Not tagged
DRO entry for this publication

Wang, Guoqiang*, Qian, Xiaolei*, Li, Xuefei*, Hou, Haijing*, Liu, Yi* and Lou, Yanshan (2014) A study on compressive anisotropy and nonassociated flow plasticity of the AZ31 Magnesium Alloy in hot rolling, Mathematical problems in engineering, vol. 2014, pp. 1-9, Hindawi, New York, N.Y. [C1]
ERA journal ID: 32404 – Scopus EID: 2-s2.0-84897554930
DRO entry for this publication

Yin, Juliang*, Wang, Wenyi*, Man, Zhihong* and Khoo, Suiyang (2014) Statistical modeling of gear vibration signals and its application to detecting and diagnosing gear faults, Information sciences, vol. 259, pp. 295-303, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 17908 – Scopus EID: Not tagged
DRO entry for this publication

Yoon, Jeong Whan, Lou, Yanshan*, Yoon, Jonghun* and Glazoff, Michael V.* (2014) Asymmetric yield function based on the stress invariants for pressure sensitive metals, International journal of plasticity, vol. 56, pp. 184-202, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4909 – Scopus EID: 2-s2.0-84890627514
DRO entry for this publication

Chandrasekaran, Sivachandran, Littlefair, Guy, Joordens, Matthew and Stojcevski, Alex (2014) A comparative study of staff perspectives on design based learning in engineering education, Journal of modern education review, vol. 4, no. 3, pp. 153-168, Academic Star Publishing Company, New York, N. Y. [C2]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Lim, Yang Choon*, Kouzani, Abbas Z., Duan, Wei, Dai, Xiujuan J., Kaynak, Akif and Mair, Douglas* (2014) A surface-stress-based microcantilever aptasensor, IEEE transactions on biomedical circuits and systems, vol. 8, no. 1, pp. 15-24, IEEE, Piscataway, NJ [C2]
ERA journal ID: 41166 – Scopus EID: Not tagged
DRO entry for this publication

Tan, Y. and Liu, T.* (2014) Characterising localised corrosion inhibition by means of parameters measured by an electrochemically integrated multielectrode array, Corrosion engineering, science and technology, vol. 49, no. 1, pp. 23-31, Maney Publishing, Leeds, England [C2]
ERA journal ID: 4760 – Scopus EID: Not tagged
DRO entry for this publication

Pack, Kenunhwan*, Ahn, Kwanghyun*, Huh, Hoon* and Lou, Yanshan (2014) Fracture modelling of DP780 sheets using a hybrid experimental-numerical method and two-dimensional digital image correlation, International journal of materials and product technology, vol. 48, no. 1, pp. 34-46, Inderscience Publishers, Geneva, Switzerland [C2.1]
ERA journal ID: 3761 – Scopus EID: 2-s2.0-84893929165
DRO entry for this publication

Walker, Adam J., Kim, Yesul, Price, J. Blair*, Kale, Rajas P., McGillivray, Jane A., Berk, Michael and Tye, Susannah J. (2014) Stress, inflammation, and cellular vulnerability during early stages of affective disorders: biomarker strategies and opportunities for prevention and intervention, Frontiers in psychiatry, vol. 5, no. 34, Frontiers Research Foundation, Lausanne, Switzerland [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Shon, Ho Kyong*, Nghiem, Long Duc*, Kim, Suhan*, Chiemchaisri, Chart*, Aravinthan, Vasantha*, Virkutyte, Jurate*, Shu, Li and Jegatheesan, Veeriah (2014) Editorial : Special issue on the challenges in environmental science and engineering : CESE-2012 9-13 September 2012, RACV City Club, Melbourne, Australia, Desalination and water treatment, vol. 52, no. 4 - 6, p. 555, Taylor & Francis, Abingdon, England [C4]
ERA journal ID: 41476 – Scopus EID: 2-s2.0-84893862558
DRO entry for this publication

Abeyrathna, Buddhika, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Sensitivity analysis of roll load, torque and material properties in the roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 900-903, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Abvabi, Akbar, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Effect of temper rolling on final shape defects in a V-section roll forming process, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 896-899, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) The effect of forming strategy on the longitudinal bow in roll forming of advanced high strength steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 876-879, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Badr, Ossama, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation about the effect of increasing the number of forming passes on the quality of AHSS roll formed products, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 872-875, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Jiao, Jingsi, Rolfe, Bernard, Mendiguren, Joseba* and Galdos, Lander* (2014) The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 892-895, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Marnette, Jascha, Rolfe, Bernard, Hodgson, Peter and Weiss, Matthias (2014) Numerical investigation on the effect of skin passing and roller leveling on the bending behaviour of mild steel, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 452-455, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Mendiguren, Joseba*, Hanselmanb, Stijn*, Atzemac, Eisso*, Hodgson, Peter, Rolfe, Bernard and Weiss, Matthias (2014) Characterization of a dual phase steel using tensile and free bending tests, in Zhang, Shi-Hong; Liu, Xiang-Hua; Cheng, Ming and Li, Juan (eds), NUMISHEET 2014 : AIP Conference Proceedings : The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 659-662, AIP Publishing, College Park, Maryland [E1]
DRO entry for this publication

Mortimer, Michael, Horan, Ben and Stojcevski, Alex (2014) 4 Degree-of-freedom haptic device for surgical simulation, in Kiguchi, Kazuo and Hata, Yutaka (eds), WAC 2014 : Emerging technologies for a new paradigm in system of systems engineering : Proceedings of the 2014 World Automation Congress, p. 1, Taylor & Francis, Philadelphia, Pa. [E1]
DRO entry for this publication

Chandrasekaran, Sivachandran, Littlefair, Guy, Joordens, Matthew and Stojcevski, Alex (2014) Distance education and on-campus students perceptions of collaborative learning in engineering, in unknown (ed.), ICEEE 2014 : Proceedings of the E-Learning and E-Technologies in Education 2014 International Conference, pp. 55-60, Asia Pacific University of Technology and Innovation, Kuala Lumpur, Malaysia [E2]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2014

Research Income - National Competitive Grants

Wang, L. Characterisation of short fatigue crack growth under random loading, Australian Research Council Small Grant [T]

  • 1995: $29,766

Lemckert, C and Imberger, J*. Determination and Prediction of Mixing Induced by Turbulent Benthic Boundary Layers, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $52,366
  • 1995: $53,420

Lemckert, C. Determining the effect of mixing, induced by turbulent benthic boundary layers, on the water quality of stratified drinking water reservoirs, Department of Industry, Science and Technology - Bilateral Science and Technology Program [T]

  • 1996: $10,800

Lemckert, C. Determining the Mixing Efficiencies of Interacting Bubble Plumes, Australian Research Council Small Grant [T]

  • 1997: $21,123

Baskaran, K. Nitrification-denitrification in Algal-bacterial Biofilms Established at Different Depths, Australian Research Council Small Grant [T]

  • 1996: $24,700

Hodgson, P. The Transformation Behaviour of c-si-mn TRIP Steels with and without Nobium, Australian Research Council Small Grant [T]

  • 1997: $17,366

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $2,072
  • 2000: $21,869
  • 1999: $21,080

Crawford, B. Fatigue and Fracture Performance of Ultra Fine Ferrite Steels., Australian Research Council Small Grant [T]

  • 1999: $17,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels, Australian Research Council SPIRT Grant [T]

  • 2001: $55,968
  • 2000: $138,245
  • 1999: $133,344
  • 1998: $90,222

Hodgson, P. The Analysis and Utilisation of Metadynamic Recrystallisation in Hot Working Processes, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $58,890
  • 1999: $60,932

Hodgson, P. The Formation and Mechanical Properties of Ultrafind Grained Steels, Australian Research Council Large Grant [T]

  • 2001: $54,884
  • 2000: $53,724
  • 1999: $55,855

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process, Australian Research Council SPIRT Grant [T]

  • 2002: $11,386
  • 2001: $22,545
  • 2000: $21,869
  • 1999: $24,980

Wang, B. Development of a New Characterising Method for Thin Film Coatings., Australian Research Council Small Grant [T]

  • 1999: $15,000

Bathgate, R and Wang, C. Improvement of Macadamia Nut Kernel Recovery Rate, Australian Research Council Large Grant [T]

  • 1997: $29,240
  • 1996: $28,750
  • 1995: $30,237

Hodgson, P, Barnett, M and Kong, L*. Streamlining the Manufacture of Fasteners by Microstructure Control, Australian Research Council SPIRT Grant [T]

  • 2002: $104,950
  • 2001: $99,915
  • 2000: $96,105

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations, Australian Research Council SPIRT Grant [T]

  • 2001: $22,545
  • 2000: $21,869

Nahavandi, S, Mandal, P and McDonald, R*. Intelligent Information Management System, Australian Research Council SPIRT Grant [T]

  • 2003: $11,669
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres, Australian Research Council SPIRT Grant [T]

  • 2004: $244
  • 2003: $11,647
  • 2002: $23,033
  • 2001: $22,545
  • 2000: $21,869

Wang, X. Improving the Quality and Processing Performance of Alpaca Fibres, Rural Industries Research and Development Corporation [T]

  • 2003: $78,096
  • 2001: $87,176
  • 2000: $90,906

Wang, X. Twist Variation in Two-Strand Yarn Spinning, Australian Research Council Small Grant [T]

  • 2000: $14,000

Zou, L. Characterisation of toxic polycyclic aromatic hydrocarbons as by-product of wood burning, Australian Research Council Small Grant [T]

  • 2000: $15,000

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development, AusIndustry [T]

  • 2001: $5,000
  • 2000: $2,625

Barnett, M. A new approach to describing the deformed state of metals, Australian Research Council Large Grant [T]

  • 2003: $60,910
  • 2002: $53,999
  • 2001: $55,124

Hodgson, P, Kong, L and Barnett, M. Exploiting strain path change in metals, Australian Research Council Large Grant [T]

  • 2003: $62,506
  • 2002: $60,749
  • 2001: $68,379

Hodgson, P. Optimisation of the crankshaft pin grinding process, Australian Research Council - SPIRT - APA(I) [T]

  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Hodgson, P and Webb, G. Improved process control and quality in sheet metal forming using machine learning techniques, Australian Research Council SPIRT Grant [T]

  • 2003: $57,780
  • 2002: $95,566
  • 2001: $96,799

Kong, L. Heat and mass transfer in fibres, Australian Research Council International Researcher Exchange Scheme [T]

  • 2001: $6,947

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling, Australian Research Council - SPIRT - APA(I) [T]

  • 2001: $22,545

Wang, X. Development of a new hemp fibre extraction process, AusIndustry - Start Grant [T]

  • 2001: $219,160

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill, Australian Research Council - SPIRT - APA(I) [T]

  • 2004: $11,943
  • 2003: $23,853
  • 2002: $23,033
  • 2001: $22,545

Barnett, M and Pereloma, E. Exploiting Annealing Reactions for New Steel Grade Development, ARC - Linkage [T]

  • 2005: $12,194
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels, ARC - Linkage [T]

  • 2005: $11,141
  • 2004: $24,148
  • 2003: $23,613
  • 2002: $23,033

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development, ARC - Linkage [T]

  • 2004: $68,583
  • 2003: $67,032
  • 2002: $73,570

Hodgson, P. Development of Ultrafine Grained Steels, ARC - Discovery [T]

  • 2004: $94,327
  • 2003: $102,644
  • 2002: $88,904

Hu, E, Zou, L and Ma, C*. Using Solar Photocatalytic Oxidation Processes to Treat Organic Pollutants in Wastewater, ARC - IREX [T]

  • 2003: $2,095
  • 2002: $13,182

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2004: $76,513
  • 2003: $117,047
  • 2002: $46,066

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing, ARC - Linkage [T]

  • 2002: $47,970

Wang, X and Fraser, W*. Modelling and Minimising the Energy Consumption in Ring-Spinning, ARC - Discovery [T]

  • 2004: $60,026
  • 2003: $58,654
  • 2002: $30,656

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics, ARC - Linkage [T]

  • 2005: $24,388
  • 2004: $48,296
  • 2003: $47,226
  • 2002: $46,066

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2005: $218,652
  • 2004: $390,497
  • 2003: $381,699

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments, Aust'n Wool Innov'n P/L [T]

  • 2005: $272,295
  • 2004: $510,183
  • 2003: $502,794

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,512
  • 2003: $23,578

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2005: $891,556
  • 2004: $656,268
  • 2003: $70,964

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams, Geoffrey Gardiner Dairy Foundation [T]

  • 2005: $76,572

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2005: $24,650
  • 2004: $24,130
  • 2003: $11,789

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids, Australian Research Council Linkage APAI [T]

  • 2004: $24,148
  • 2003: $23,578

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure, Australian Research Council Linkage Project [T]

  • 2005: $56,689
  • 2004: $52,380
  • 2003: $49,135

Wang, X. Reducing the hairiness and improving the quality of wools yarns, Australian Research Council Linkage Project [T]

  • 2005: $64,176
  • 2004: $62,856
  • 2003: $30,709

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor, Australian Research Council Linkage APAI [T]

  • 2004: $24,355
  • 2003: $23,578

Wang, X, Xu, W and Gao, X. New hybrid fibres incorporating nano protein materials, Australian Research Council Linkage International [T]

  • 2003: $33,733

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $122,452
  • 2004: $119,738

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, Australian Research Council, Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2005: $107,835
  • 2004: $87,723

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council, Fellowship - Discovery - Federation Fellowship [T]

  • 2005: $310,325
  • 2004: $155,527

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $78,367
  • 2004: $76,755

Frayman, Y* and Rolfe, B. Developing Intelligent Systems for Manufacturing Control, Australian Research Council, Project - Discovery - Projects [T]

  • 2005: $62,693
  • 2004: $61,404

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $24,650
  • 2004: $24,107

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems, Australian Research Council, Collaborative - Linkage - Projects (Round 1, APAI) [T]

  • 2005: $98,666
  • 2004: $109,122

Wang, X. PhD Scholarship - Controlling and predicting the pilling propensity of fabrics, Australian Wool Innovation, Scholarship [T]

  • 2004: $10,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics, Australian Research Council Linkage Project [T]

  • 2005: $24,650

Nahavandi, S and Trinh, H. Parallel-link Mechanism Control using new Concept and Techniques, Australian Research Council Discovery Project [T]

  • 2005: $61,260

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2005: $78,129

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2005: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2005: $59,889

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2005: $159,903

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2005: $50,000

Cookson, P and Wang, L. A Review of the Pilling of Wool Knitwear, Australian Wool Innovation [T]

  • 2005: $30,958

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation [T]

  • 2005: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2005: $26,000

Hu, E. Hybrid cooling for coal fired power stations, ARC Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2009: $-36,774

Xiang, Y and Trinh, H. Blind Signal Separation from Unidentifiable Systems, ARC Grant - Discovery Projects [T]

  • 2009: $53,478

Research Income - Other Public Sector Funding

Lemckert, C and Armfield, S*. Investigation of the flushing of riverine saline pools [U]

  • 1995: $5,400

Wang, B and Um, K*. Improvement of Material Texture on Rolled Steels [U]

  • 1998: $33,620

Tracey, A. Scholarship Income [U]

  • 2000: $6,800
  • 1999: $8,400

Nahavandi, S and Bottcher, C*. Integration of Mechatronics into Product Development [U]

  • 2002: $3,750

Littlejohn, M. Innovation Co-Ordinator [U]

  • 2002: $126,000

Wilson, H. Scholarship Income [U]

  • 2000: $20,000

Hu, E. Networking with Yunnan Normal University and Chinese power industry on the technology to reduce green house gas emission from power station. [U]

  • 2000: $13,700

Baskaran, K. PhD Scholarship - Heidi Wilson [U]

  • 2001: $20,000

Hodgson, P. Advanced Materials Manufacturing and Performance Centre [U]

  • 2002: $842,500

Wang, X. PhD Scholarship - Kevin Magniez [U]

  • 2003: $48,545

Hodgson, P. Victorian Centre for Advanced Materials Manufacturing (VCAMM) [U]

  • 2005: $336,762
  • 2004: $1,188,037
  • 2003: $1,320,339

Wang, X and Lin, T. Development of electrospun technical fibres with submicron and special functionalities for military applications [U]

  • 2004: $20,000

Wang, X and Wang, L. Development of intelligent textile yarn and fabric ensembles for military applications [U]

  • 2004: $15,000

Wang, X. PhD Scholarship - High Technology fibres based on polymer blends nanocomposites [U]

  • 2005: $48,545
  • 2004: $48,545

Lin, T. The Development of Electrospun Fibres for Use in Textile Applications [U]

  • 2005: $10,000

Lin, T. Metallizing the surface of textile substrates using surface coating technique. [U]

  • 2005: $5,000

Hu, E. Solar Aided Power Generation [U]

  • 2009: $-9,487

Research Income - Industry and Other Funding

Wardeiner, P. Color Rubfastness of Carpets [V]

  • 1997: $10,000

Hodgson, P. Development of optimized material, tooling and process for cold forging of bolts and screws utilizing advanced non-linear finite element and analysis approaches; andDevelopment of new methods of manufacture of fasteners on a continuous basis, eliminatin [V]

  • 1999: $55,000
  • 1998: $110,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $25,000
  • 1999: $25,000
  • 1998: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $35,000
  • 1999: $25,000
  • 1998: $25,000
  • 1997: $25,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2000: $12,500
  • 1999: $62,500
  • 1998: $150,000
  • 1997: $75,000

Nahavandi, S. Braeside Project 1 - Machine Condition Monitoring [V]

  • 1999: $25,000
  • 1998: $55,800

Nahavandi, S. Braeside Project 2 - Factory Modelling [V]

  • 1999: $28,000
  • 1998: $78,800

Hodgson, P, Brownrigg, A and Scott, R. Developing an Understanding of the Fundamentals of Roll Formability of ZINCALUME G550 [V]

  • 2000: $10,000
  • 1999: $10,000
  • 1998: $20,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 1999: $61,250
  • 1998: $8,750
  • 1997: $26,250

Baskaran, K. Application of Clean Technology for Carpet Manufacturing [V]

  • 1999: $25,000
  • 1998: $5,600

Roche, D. Scholarship Income [V]

  • 2000: $37,500
  • 1999: $22,500

Hodgson, P. Stamping technology for Automotive Processes [V]

  • 2000: $50,000
  • 1999: $100,000

Baskaran, K. The Use of Algal-Bacterial Biofilms to enhance Nitrogen Removal in Wastewater Treatment Lagoon. [V]

  • 2000: $19,000

Nahavandi, S and Kouzani, A. Design and Development of an Intelligent Vehicle Roll and Pitch Measurement System [V]

  • 2002: $30,800
  • 2000: $26,600

Brownrigg, A, Wang, B and Hodgson, P. Optimising In-line Cold Drawing Prior to Cold Forging of Steel Fasteners in Order to Improve Productivity and Product Performance [V]

  • 2001: $5,000
  • 2000: $10,000

Hodgson, P, Barnett, M and Kong, L. Streamlining the Manufacture of Fasteners by Microstructure Control [V]

  • 2002: $39,500
  • 2001: $45,000
  • 2000: $45,000

Hodgson, P. Development of an integrated stamping system for the production of automotive body panels from metal coated steels [V]

  • 2001: $5,000
  • 2000: $48,750

Hu, E. Utilize solar energy to reduce green house gas emissions from conventional power stations [V]

  • 2001: $10,000
  • 2000: $10,000

Nahavandi, S, Mandal, P and Bodo, R*. Intelligent Information Management system [V]

  • 2002: $8,000
  • 2000: $8,000

Nahavandi, S, Bodo, R* and Abachi, H*. Intelligent Machine Condition Monitoring System for Cold Forging Process [V]

  • 2000: $16,000

Wang, X. Effect of Fibre and Machine Interactions on Fibre Properties and Product Quality in Value Adding Processing of Australian Rare Natural Fibres [V]

  • 2001: $5,000
  • 2000: $5,000

Nahavandi, S. Design, development and manufacture of a control system for a 'dynamically reconfiguring surface' [V]

  • 2001: $11,144
  • 2000: $75,382

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2001: $35,000

Hodgson, P. Optimisation of the crankshaft pin grinding process [V]

  • 2003: $5,000
  • 2002: $5,185
  • 2001: $5,000

Kouzani, A and Nahavandi, S. Blue Eyes: A machine vision system for automatic detection of tyre defects [V]

  • 2001: $94,340

Long, J and Brownrigg, A. The production of hard-alloy carbide surfaces on soft substrates by chemical diffusion at low temperatures [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000
  • 2001: $56,000

Nahavandi, S. Real time manufacturing control system based on discrete event simulation and modelling [V]

  • 2001: $16,200

Nahavandi, S and Kouzani, A. Design, development and manufacture of a control system (Mark II) for a wobbly wall [V]

  • 2001: $80,000

Zou, L. Simulation of acid treatment of brown coal fly ash to remove the heavy metals before landfill [V]

  • 2003: $5,000
  • 2002: $5,000
  • 2001: $5,000

Hodgson, P and Barnett, M. Hot Rolling Model for Control of Nb Bearing Steels [V]

  • 2004: $7,500
  • 2003: $7,500
  • 2002: $7,500

Hodgson, P and Barnett, M. Development of Microstructure Model for Process and Product Development [V]

  • 2004: $30,000
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S, Kong, L and Kouzani, A. A Distributed Virtual Factory in Agile Manufacturing [V]

  • 2004: $25,000
  • 2003: $25,000
  • 2002: $25,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V]

  • 2004: $12,000
  • 2003: $12,000
  • 2002: $12,000

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles [V]

  • 2002: $377,216

Nahavandi, S. Fusion of Sensory Systems in Automobiles [V]

  • 2004: $4,990
  • 2003: $30,000
  • 2002: $30,000

Nahavandi, S. PhD Scholarship - Arvind Mane [V]

  • 2002: $5,000

Palmowski, L. Evaluation of Wastewater treatment plant performance [V]

  • 2002: $8,545

Wang, X. Developing very fine and soft worsted yarns [V]

  • 2002: $98,852

Wang, X, Xu, W*, Brady, R and Gao, X*. Continuous Wool Blend Filaments [V]

  • 2002: $689,684

Zou, L. Vehicle Emission Testing of Biodiesel made from Vegetable Oil [V]

  • 2002: $6,800

Barnett, M and Pereloma, E*. Exploiting Annealing Reactions for New Steel Grade Development [V]

  • 2003: $7,500
  • 2002: $7,500

Hodgson, P, Webb, G, Sellars, C* and Beynon, J*. Improved process control and quality in sheet metal forming using machine learning techniques [V]

  • 2003: $20,000
  • 2002: $40,000

Hodgson, P. Stamping Technology for Automotive Processes [V]

  • 2003: $38,432
  • 2002: $49,262

Hu, E. Assessment of the new technologies to maximise the internal energy efficiency by modelling the energy flows in Victorian Power Stations [V]

  • 2005: $1,000
  • 2004: $10,000
  • 2003: $10,000

Baskaran, K, Stanley, G, Stanley, G*, Meehan, B, Meehan, B*, Simons, L, Simons, L* and Palmowski, L. Closing the Loop: A holistic approach to the management of dairy processor waste streams [V]

  • 2004: $100,790
  • 2003: $35,564

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V]

  • 2004: $6,000
  • 2003: $6,000

Nahavandi, S and Kouzani, A. Methodologies for automatic visual identification in heat detection aids [V]

  • 2003: $5,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V]

  • 2004: $35,327
  • 2003: $47,614

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V]

  • 2004: $15,000
  • 2003: $25,000

Zou, L and Hu, E. Removal of Toxic Air Pollutants from car cabin by Photocatalytic Oxidation Reactor [V]

  • 2005: $7,000
  • 2004: $7,000
  • 2003: $7,000

Nahavandi, S. Study of man-machine interface optimization in a lean production setup [V]

  • 2004: $25,000
  • 2003: $64,011

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V]

  • 2004: $52,590
  • 2003: $58,701

Littlejohn, M. Food supply chain modelling [V]

  • 2003: $25,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V]

  • 2004: $30,000

Baskaran, K. Methane production from abattoir/canned meat wastes - a feasibility study [V]

  • 2004: $22,000

Zou, L. Casting Emission Reduction Program (CERP) - Fiscal Year 2003 [V]

  • 2004: $7,109

Palmowski, L and Baskaran, K. Clean-In-Place - A review of current technology and its use in the food and beverage industry. [V]

  • 2005: $39,560

Palmowski, L. Optimising integrated water recycling and waste heat recovery in rendering plants and abattoirs [V]

  • 2005: $21,651

Zou, L. TiO2 Nanostructured surfaces [V]

  • 2005: $69,982

Wang, X. A report detailing the feasibility of implementing a post-farm e-learning network for wool in China and India [V]

  • 2005: $12,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2005: $50,000
  • 2004: $50,000
  • 2003: $50,000
  • 2002: $50,000
  • 2001: $125,000
  • 2000: $175,000
  • 1999: $200,000

Hodgson, P and Doolan, M*. Stamping Technology for Automotive Processes (3) [V.1]

  • 2005: $35,000
  • 2004: $50,000
  • 2002: $95,000
  • 2001: $50,000

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming [V.1]

  • 2005: $6,000

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2005: $46,489

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2005: $15,000

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2005: $73,786

Hu, E and Zou, L. Optimization of fuel consumption and vehicle emission by simulating the integrated air conditioning and engine controls [V.1]

  • 2005: $10,000
  • 2004: $10,000

Nahavandi, S and Trinh, H. Rapid Modelling, Simulation and Control for Automated Conveyor Systems [V.1]

  • 2005: $30,000

Wang, L and Wang, X. Modelling and Performance Evaluation of Stab and Ballistic Resistant Fabrics [V.1]

  • 2005: $6,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2005: $20,000

Palmowski, L. Anaerobic degradation, with and without chemical pre-treatment, of carding waste. [V.1]

  • 2005: $12,005

Wang, L. Simulating the process of knife stabbing [V.1]

  • 2005: $21,000

Hu, E. Hybrid cooling for coal fired power stations [V.1]

  • 2009: $-18,818

Baskaran, K. New industrial cleaning practices - cleaner effluent. [V.1]

  • 2009: $59,539

Hu, E. Application of an Adsorption Desalinator in Water Recycling [V.1]

  • 2009: $89,125

Research Income - Industry and Other Funding - International B (Other Income)

Hodgson, P. The formability and post forming properties of TRIP and other High Strength Steels [V.3]

  • 2005: $102,564

Research Income - Other Funding Sources

Hodgson, P. CAST Metals Manufacturing, CRC for CAST Metals Manufacturing [X]

  • 2005: $363,598
  • 2004: $504,948
  • 2003: $402,603

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, DEST Grant - CRC for Advanced Automotive Technology [X]

  • 2009: $169,178

Hilditch, T, Barnett, M and Beer, A. Light weight automotive front end structures, CRC_CAST Cooperative Research Centre CAST CRC Limited [X]

  • 2009: $21,800

Pathirana, P and Herath, S. Sensor fusion based bynamic state estimation for sourcing of information in driver assistance C3-508, DEST Scholarship - CRC for Advanced Auto Technology, DEST Scholarship - CRC for Advanced Auto Technology [X]

  • 2009: $33,000

Higher Degree by Research Completions

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Monday 1st September 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010