Research Services Division

Deakin Research

2001 Centre for Material and Fibre Innovation Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Cukrov, L.M.*, Tsuzuki, T. and McCormick, P.G.* (2001) SnO2 nanoparticles prepared by mechanochemical processing, Scripta materialia, vol. 44, no. 8-9, pp. 1787-1790, Pergamon, Oxford, England [C1.1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-0035906669
Citation counts: Scopus - 46, Thomson - 36
DRO entry for this publication

Dodd, A.C.*, Tsuzuki, T. and McCormick, P.G.* (2001) Nanocrystalline zirconia powders synthesised by mechanochemical processing, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 301, no. 1, pp. 54-58, Elsevier SA, Lausanne, Switzerland [C1.1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-0035869130
Citation counts: Scopus - 24, Thomson - 20
DRO entry for this publication

Guo, Qipeng, Harrats, C.*, Groeninckx, G.* and Koch, M.* (2001) Miscibility, crystallization Îșinetics and real-time small-Angle x-ray scattering investigation of the semicrystalline morphology in thermosetting polymer blends of epoxy resin and poly(ethylene oxide), Polymer, vol. 42, no. 9, pp. 4127-4140, Elsevier Ltd., New York, N.Y. [C1.1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-0035110212
Citation counts: Scopus - 68, Thomson - 67
DRO entry for this publication

Hickson, M.R.*, Hurley, P.J.*, Gibbs, R.K.*, Kelly, Georgina and Hodgson, Peter (2001) The production of ultrafine ferrite in low-carbon steel by strain-Induced transformation, Metallurgical and materials transactions A : physical metallurgy and materials science, vol. 33, no. 4, pp. 1019-1026, Minerals, Metals & Materials Society, Warrendale, PA [C1.1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-0036540804
Citation counts: Scopus - 54, Thomson - 38
DRO entry for this publication

Islamgaliev, R. K.*, Yunusova, N. F.*, Sabirov, Ilchat, Sergueeva, A. V.* and Valiev, R. Z.* (2001) Deformation behavior of nanostructured aluminum alloy processed by severe plastic deformation, Materials science and engineering A, vol. 319-321, pp. 877-881, Elsevier, Amsterdam, The Netherlands [C1.1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-18344418223
Citation counts: Scopus - 54, Thomson - 57
DRO entry for this publication

McCormick, Paul G.*, Tsuzuki, Takuya, Robinson, John S.* and Ding, Jun* (2001) Nanopowders synthesized by mechanochemical processing, Advanced materials, vol. 13, no. 12 - 13, pp. 1008-1010, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany [C1.1]
ERA journal ID: 4865 – Scopus EID: 2-s2.0-0035806604
Citation counts: Scopus - 101
DRO entry for this publication

Tsuzuki, Takuya and McCormick, Paul G.* (2001) Synthesis of ultrafine ceria powders by mechanochemical processing, Journal of the American ceramic society, vol. 84, no. 7, pp. 1453-1458, Wiley-Blackwell Publishing, Malden, Mass. [C1.1]
ERA journal ID: 4948 – Scopus EID: 2-s2.0-0035413168
Citation counts: Scopus - 65
DRO entry for this publication

Tsuzuki, Takuya and McCormick, Paul G.* (2001) Mechanochemical synthesis of niobium pentoxide nanoparticles, Materials transactions, vol. 42, no. 8, pp. 1623-1628, Nihon Kinzoku Gakkai, Sendai , Japan [C1.1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-0034769318
Citation counts: Scopus - 8
DRO entry for this publication

Tsuzuki, Takuya and McCormick, Paul G.* (2001) ZnO nanoparticles synthesised by mechanochemical processing, Scripta materialia, vol. 44, no. 8-9, pp. 1731-1734, Pergamon, Oxford, England [C1.1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-0035906634
Citation counts: Scopus - 86, Thomson - 77
DRO entry for this publication

Wen, Cui'e, Mabuchi, M.*, Yamada, Y.*, Shimojima, K.*, Chino, Y.* and Asahina, T.* (2001) Processing of biocompatible porous Ti and Mg, Scripta materialia, vol. 45, no. 10, pp. 1147-1153, Pergamon, Oxford, England [C1.1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-0035914589
Citation counts: Scopus - 324, Thomson - 291
DRO entry for this publication

Lamb, Peter (2001) Breeding for product quality and processing performance, Australian farm journal : wool, no. October, pp. 43-47, Rural Press Victoria, Melbourne, Vic. [C3.1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Knox, I.* and Lamb, P. R. (2001) Alpaca clip preparation in Australia, in Unknown (ed.), Proceedings of The Llama and Alpaca Association of New Zealand 2001. Conference, Alpaca Association New Zealand, Christchurch, N.Z. [E1.1]
DRO entry for this publication

Prins, Martin*, Lamb, Peter and Finn, Niall* (2001) Solospun : the long staple weavable singles yarn, in Unknown (ed.), An Odyssey in Fibres and Space : Textile Institute 81st World Conference, pp. 1-13, Textile Institute, London, England [E1.1]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2001

Research Income - National Competitive Grants

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2006: $11,000

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2007: $1,092,684
  • 2006: $1,264,790

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2006: $12,557

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $115,391
  • 2007: $113,125
  • 2006: $110,880

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, ARC_Deakin University Australian Postgraduate Award Industry Second Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2008: $69,288
  • 2007: $78,047
  • 2006: $182,166

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council Fellowship - Discovery - Federation Fellowship [T]

  • 2008: $329,089
  • 2007: $322,625
  • 2006: $316,222

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2006: $85,179

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2007: $77,908
  • 2006: $75,907

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2007: $50,000
  • 2006: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2007: $67,007
  • 2006: $63,353

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2006: $137,517

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2006: $124,800

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation Limited Grant - Research [T]

  • 2008: $12,000
  • 2007: $14,000
  • 2006: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2006: $15,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, Australian Research Council Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2008: $110,360
  • 2007: $104,915
  • 2006: $94,417

Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide., Australian Research Council Collaborative - Linkage - Projects (Round 1) [T]

  • 2008: $148,460
  • 2007: $145,549
  • 2006: $142,660

Cookson, P. Engineering Enhancements to Wool Fabrics Through Commercial Atmospheric Plasma Treatments., Australian Wool Innovation Limited [T]

  • 2007: $112,053
  • 2006: $80,000

Muddle, B*, Hodgson, P, Schaffer, G*, Ferry, M*, Ringer, S*, Xia, K*, Nie, J*, Davies, C*, Hutchinson, C*, Barnett, M, Dahle, A*, Caceres, C*, Hoffman, M*, Dunlop, G*, Couper, M*, Embury, J*, Loretto, M*, Humphries, F*, Arnberg, L*, Estrin, Y*, Fraser, H* and Brechet, Y*. Design in Light Metals, Australian Research Council Centre - Centres of Excellence [T]

  • 2008: $609,384
  • 2007: $497,330
  • 2006: $497,330

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]

  • 2008: $72,457
  • 2007: $73,597
  • 2006: $36,696

Hodgson, P. Ductile Bulk Metallic Glass Composites, Australian Research Council - Linkage International [T]

  • 2007: $10,396
  • 2006: $5,000

Halley, P* and Guo, Q. Novel Tough Polymer Composites, Australian Research Council [T]

  • 2007: $57,446
  • 2006: $106,784

Guo, Q. Nanoporous Epoxy Thermosets via Microphase Separation of Block Copolymers, Australian Research Council [T]

  • 2006: $81,151

Kaynak, A. PhD Scholarship - Novel Conducting Polymer Films and Coated Textiles, Australian Wool Innovation Limited Scholarship [T]

  • 2008: $24,181
  • 2007: $5,000
  • 2006: $11,000

Wang, X. FT881 Wool Study Tour 2006, Australian Wool Innovation Limited [T]

  • 2006: $23,970

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology, Department of Innovation, Industry and Regional Development Grant - Centre of Excellence Project [T]

  • 2008: $139,333
  • 2007: $235,000

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]

  • 2008: $119,676
  • 2007: $58,664

Barnett, M, Godet, S*, Yue, S* and Jonas, J*. Mechanisms for Improved Ductility of Magnesium Alloys, Australian Research Council Collaborative - Linkage - International [T]

  • 2008: $15,498
  • 2007: $15,000

Wang, X, Cookson, P, Kikutani, T* and Gao, X*. Advanced polymer fibres with multiple functionalities, Australian Research Council Collaborative - Linkage - International [T]

  • 2008: $8,327
  • 2007: $15,000

Kong, L, She, M and Trengove, R*. Feedwater characterisation, Commonwealth Scientific and Industrial Research Organisation Flagship Collaboration Research Fund [T]

  • 2008: $123,548
  • 2007: $120,237

Wen, C, Yan, W* and Nicholson, G*. Titanium Alloy Scaffolds for Osseointegration Implant Materials, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $84,469
  • 2007: $82,227

Barnett, M and Muddle, B*. Design in Light Metals: Thermohydrogen Processing of titanium., Centres of Excellence, Australian Research Council, Centres of Excellence [T]

  • 2007: $91,461

Mai, Y* and Guo, Q. Nanostructure Design and Toughening of Novel Thermosets, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $89,532

Hodgson, P, Beynon, J*, Strezov, L*, Stanford, N, Dippenaar, R*, Sietsma, J* and Thijsse, B*. Development of new steel products by thin strip casting and direct thermomechanical processing, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $149,000

Lin, T and Wang, X. A New Chlorine-Free Shrink Proofing Technology - A Feasibility Study, Australian Wool Innovation Limited Grant - Research [T]

  • 2008: $47,500

Wang, X. Improving production efficiency, quality and value-adding of rare natural fibres, Rural Industries Research and Development Corporation Grant - Research [T]

  • 2008: $28,000

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2008: $47,685

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI) [T]

  • 2008: $38,250

Research Income - Other Public Sector Funding

Lin, T and Wang, X. Application of Thin Coatings to Textile Substances [U]

  • 2006: $50,000

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology [U]

  • 2006: $125,667

Wang, L, Lin, T, Cookson, P, Hurren, C and Wang, X. Performance fibres and textiles [U]

  • 2008: $8,000
  • 2007: $72,000

Wang, X, Lin, T and Hurren, C. SEED FUNDING FOR Development of broadband electromagnetic spectral managed textile fabrics [U]

  • 2007: $10,000

Lin, T and Wang, X. Tuneable nanostructured electronic textiles based on conducting polymers and carbon nanotubes [U]

  • 2007: $90,000

Lin, T. GHD Early Researchers Award [U]

  • 2008: $4,545

Tsuzuki, T, Wang, X and Zhang, L. Biomaterials and functional textiles [U]

  • 2008: $50,000

Wang, X. Selective sequestering of heavy metal and actinide ions by biopolymer powders derived from silk biopolymer powder derived from silk fibres [U]

  • 2008: $13,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2008: $25,000
  • 2007: $60,000
  • 2006: $50,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V.1]

  • 2006: $397

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2006: $11,775

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2006: $32,698

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2008: $25,872
  • 2007: $95,761
  • 2006: $77,880

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2007: $15,000
  • 2006: $20,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2006: $14,500

Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide. [V.1]

  • 2007: $28,125
  • 2006: $37,500

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness [V.1]

  • 2008: $10,000
  • 2007: $40,000

Wang, X, Cookson, P, Lin, T and Kaynak, A. Bio-medical and healthcare applications of fibres and textiles [V.1]

  • 2007: $7,500
  • 2006: $67,500

Gao, W and Hodgson, P. Simulation of the Heat Treatment Process Intensified by Solid Particles [V.1]

  • 2006: $10,000

Wang, L and Wang, X. Modelling Airflow for Fibre Transfer and Separation [V.1]

  • 2006: $10,000

Barnett, M and Rolfe, B. A multi-scale model of plasticity for magnesium alloys [V.1]

  • 2006: $5,000

Rolfe, B. Multi-scale modelling of Martensitic Transformation in Steel by enhancing StGermain [V.1]

  • 2006: $18,750

Lin, T and Wang, X. PhD Scholarship - Ian Heritage Scholarship [V.1]

  • 2008: $20,000
  • 2006: $40,000

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface [V.1]

  • 2008: $50,000

Wang, L, Wang, X and Yan, W. Impact Simulation of Irregular Fibres [V.1]

  • 2007: $10,000

Forrest, M and Wen, C. Lightweight Composite Armour for Personal Protection [V.1]

  • 2007: $319,725

Rolfe, B. Extending the multi-scale capabilities of Xanthus [V.1]

  • 2007: $12,000

Wen, C. Victorian Centre for Advanced Materials Manufacturing (VCAMM round 2/3): Development of Scaffold metal alloys for biomedical applications [V.1]

  • 2008: $76,725
  • 2007: $200,475

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece [V.1]

  • 2008: $15,000

Hodgson, P and Fabijanic, D. Novel Fluidised Bed Duplex Surface Treatments for Ferrous Materials [V.1]

  • 2008: $61,732

Research Income - Industry and Other Funding - International B (Other Income)

Kong, L. Development of a bio-degradable rubber/polymer base for chewing gum [V.3]

  • 2007: $55,000

Hodgson, P and Dingle, M. Predicting tool life issues of AHSS stampings. [V.3]

  • 2008: $44,881

Research Income - Other Funding Sources

Barnett, M. CAST Metals Manufacturing - A, CRC for CAST Metals Manufacturing [X]

  • 2006: $97,352

Hilditch, T and Hodgson, P. Auto CRC Initial Project 14, Rapid Tooling Development, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $56,910

Barnett, M. Wrought Magnesium Alloys Development, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $200,249
  • 2007: $84,094

Hodgson, P. Light Metals Prototype Structures, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $16,372

Frayman, Y. Melt Handling and Dross Generation, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $36,674
  • 2007: $81,677

Nahavandi, S. Die Casting Productivity, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $85,585

Hilditch, T and Hodgson, P. Auto CRC - MDO C4-04, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $20,132

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $162,614

Hodgson, P and Nikhare, C. The development of low cost, complex shapes from advanced high strength steels using low pressure hydroforming, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $8,000

Higher Degree by Research Completions

No completions found or audited.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 22nd October 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010