Research Services Division

Deakin Research

2006 Centre for Material and Fibre Innovation Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Madej, L.*, Hodgson, Peter and Pietrzyk, M.* (2006) Multi scale analysis of material behavior during deformation processes, in Kurzydlowski, Krzysztof J. (eds), Foundation of materals design 2006, pp. 17-46, Research Signpost, India [B1]
DRO entry for this publication

Rolfe, Bernard, Frayman, Yakov, Kelly, Georgina and Nahavandi, Saeid (2006) Recognition of lubrication defects in cold forging process with a neural network, in Kamruzzaman, Joarder; Begg, Rezaul and Sarker, Ruhul (eds), Artificial neural networks in finance and manufacturing, pp. 262-275, Idea Group Publishing, Hershey, PA [B1]
DRO entry for this publication

Barnett, Matthew, Keshavarz, Zohreh and Ma, Xiang (2006) A semianalytical Sachs model for the flow stress of a magnesium alloy, Metallurgical and materials transactions A, vol. 37, no. 7, pp. 2283-2293, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-33746050742
Citation counts: Scopus - 50, Thomson - 44
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2006) Influence of initial microstructure on the hot working flow stress of Mg–3A1–1Zn, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 423, no. 1-2, pp. 292-299, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-33748204677
Citation counts: Scopus - 66
DRO entry for this publication

Beltran, Rafael, Wang, Lijing and Wang, Xungai (2006) Predicting the pilling tendency of wool knits, Journal of the Textile Institute, vol. 97, no. 2, pp. 129-136, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-33646227428
Citation counts: Scopus - 16
DRO entry for this publication

Beltran, Rafael, Wang, Lijing and Wang, Xungai (2006) Measuring the influence of fibre-to-fabric properties on the pilling of wool fabrics, Journal of the textile institute, vol. 97, no. 3, pp. 197-204, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-33745286245
Citation counts: Scopus - 15
DRO entry for this publication

Beltran, Rafael, Wang, Lijing and Wang, Xungai (2006) Mill specific prediction of worsted yarn performance, Journal of the textile institute, vol. 97, no. 1, pp. 11-16, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-32944467428
Citation counts: Scopus - 6
DRO entry for this publication

Eghbali, Beitallah*, Abdollah-Zadeh, A.*, Beladi, Hossein and Hodgson, Peter (2006) Characterization on ferrite microstructure evolution during large strain warm torsion testing of plain low carbon steel, Materials science & engineering. A. Structural materials : properties, microstructure and processing, vol. 435-436, pp. 499-503, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-33748904213
Citation counts: Scopus - 14, Thomson - 18
DRO entry for this publication

Fei, Dongye and Hodgson, Peter (2006) Experimental and numerical studies of springback in air V-bending process for cold rolled TRIP steels, Nuclear engineering and design, vol. 236, no. 18, pp. 1847-1851, North-Holland Pub. Co.,, Amsterdam, Netherlands [C1]
ERA journal ID: 1208 – Scopus EID: 2-s2.0-33745493984
Citation counts: Scopus - 52, Thomson - 40
DRO entry for this publication

Foitzik, Richard, Kaynak, Akif, Pfeffer, Frederick and Beckmann, J.* (2006) Synthesis, polymerization and wool coating studies of 3-iso-butylpyrrole and 3-iso-pentylpyrrole, Synthetic metals, vol. 156, no. 21-24, pp. 1333-1340, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-33846575675
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Foitzik, Richard, Kaynak, Akif and Pfeffer, Frederick (2006) Application of soluble poly (3-alkylpyrrole) polymers on textiles, Synthetic metals, vol. 156, no. 7-8, pp. 637-642, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-33747615010
Citation counts: Scopus - 18, Thomson - 16
DRO entry for this publication

Gao, Weimin, Kong, Lingxue* and Hodgson, Peter (2006) Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed, Applied thermal engineering, vol. 26, no. 14-15, pp. 1463-1470, Pergamon, Oxford, United Kingdom [C1]
ERA journal ID: 3658 – Scopus EID: 2-s2.0-33646349454
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Guo, Qipeng, Chen, Fei*, Wang, Ke* and Chen, Ling* (2006) Nanostructured thermoset epoxy resin templated by an amphiphilic poly(ethylene oxide)-block-poly(dimethylsiloxane) diblock copolymer, Journal of polymer science. Part B : Polymer physics, vol. 44, no. 21, pp. 3042-3052, John Wiley & Sons, Inc, New York, N.Y. [C1]
ERA journal ID: 1679 – Scopus EID: 2-s2.0-33750570474
Citation counts: Scopus - 20, Thomson - 20
DRO entry for this publication

Guo, Qipeng (2006) Phase behavior and crystallization in blends of a low molecular weight polyethylene-block-poly(ethylene oxide) diblock copolymer and poly(hydroxyether of bisphenol A), Thermochimica acta, vol. 451, no. 1-2, pp. 168-173, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 1511 – Scopus EID: 2-s2.0-33751350643
Citation counts: Scopus - 10, Thomson - 12
DRO entry for this publication

Håkansson, Eva, Lin, Tong, Wang, Hongxia and Kaynak, Akif (2006) The effects of dye dopants on the conductivity and optical absorption properties of polypyrrole, Synthetic metals, vol. 156, no. 18-20, pp. 1194-1202, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-33750979557
Citation counts: Scopus - 44, Thomson - 40
DRO entry for this publication

Håkansson, Eva, Amiet, Andrew* and Kaynak, Akif (2006) Electromagnetic shielding properties of polypyrrole/polyester composites in the 1–18 GHz frequency range, Synthetic metals, vol. 156, no. 14-15, pp. 917-925, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-33747756848
Citation counts: Scopus - 55, Thomson - 51
DRO entry for this publication

Keshavarz, Zohreh and Barnett, Matthew (2006) EBSD analysis of deformation modes in Mg-3A1-1Zn, Scripta materialia, vol. 55, no. 10, pp. 915-918, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-33748329514
Citation counts: Scopus - 95, Thomson - 87
DRO entry for this publication

Lee, Ho-Won*, Kwon, Hyuck-Cheol*, Im, Yong-Taek* and Hodgson, Peter D. (2006) Microstructure evolution modeling of square-diamond pass hot bar rolling of AISI 4135 steel, Computer methods in materials science, vol. 6, no. 3, pp. 140-149, AKAPIT, Lodz, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Li, Zhijian, Wang, Xungai and Wang, Lijing (2006) Properties of hemp fibre reinforced concrete composites, Composites part A : applied science and manufacturing, vol. 37, no. 3, pp. 497-505, Elsevier, New York, NY. [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-32644447025
Citation counts: Scopus - 38, Thomson - 28
DRO entry for this publication

Li, Zhijian, Wang, Lijing and Wang, Xungai (2006) Flexural characteristics of coir fiber reinforced cementitious composites, Fibers and polymers, vol. 7, no. 3, pp. 286-294, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-33750179283
Citation counts: Scopus - 12, Thomson - 7
DRO entry for this publication

Lin, Tong, Fang, Jian, Wang, Hongxia, Cheng, Tong and Wang, Xungai (2006) Using chitosan as a thickener for electrospinning dilute PVA solutions to improve fibre uniformity, Nanotechnology, vol. 17, pp. 3718-3723, IOP Publishing, Bristol, England [C1]
ERA journal ID: 5163 – Scopus EID: 2-s2.0-33748899682
Citation counts: Scopus - 37, Thomson - 37
DRO entry for this publication

Muszka, K.*, Hodgson, P. D. and Majta, J.* (2006) A physical based modeling approach for the dynamic behavior of ultrafine grained structures, Journal of materials processing technology, vol. 177, no. 1-3, pp. 456-460, Elsevier SA, Amsterdam, Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-33745960406
Citation counts: Scopus - 8, Thomson - 6
DRO entry for this publication

Shaikhzadeh Najar, S.*, Khan, Z. A. and Wang, Xungai (2006) The new solo-siro spun process for worsted yarns, Journal of the Textile Institute, vol. 97, no. 3, pp. 205-210, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-33745274466
Citation counts: Scopus - 19, Thomson - 15
DRO entry for this publication

Nanayakkara, N.K.B. Manjula P. and Hodgson, Peter (2006) Determination of drawbead contacts with variable bead penetration, Computer methods in materials science, vol. 6, no. 3, pp. 188-194, Akapit, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Silcock, Michael, Hall, Wayne, Fox, Bronwyn and Warrior, Nick* (2006) Finite element modelling of metallic tubular crash structures with an explicit code, International journal of vehicle safety, vol. 1, no. 4, pp. 292-303, Inderscience Publishers, Olney, England [C1]
ERA journal ID: 3654 – Scopus EID: Not tagged
DRO entry for this publication

Tang, Zheng-Xue, Wang, Xungai and Fraser, Barrie* (2006) Recent studies on yarn tension and energy consumption in ring spinning, Research journal of textile and apparel, vol. 9, no. 4, pp. 1-15, Hong Kong Polytechnic University, Hong Kong [C1]
ERA journal ID: 3546 – Scopus EID: Not tagged
DRO entry for this publication

Tang, Zheng-Xue, Wang, Xungai, Fraser, Barrie* and Wang, Lijing (2006) Simulation and experimental validation of a ring spinning process, Simulation modelling practice and theory, vol. 14, no. 7, pp. 809-816, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 39839 – Scopus EID: 2-s2.0-33749046081
Citation counts: Scopus - 9, Thomson - 10
DRO entry for this publication

Tang, Zheng-Xue, Wang, Xungai, Wang, Lijing and Fraser, W. Barrie* (2006) The effect of yarn hairiness on air drag in ring spinning, Textile research journal, vol. 76, no. 7, pp. 559-566, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-33746616804
Citation counts: Scopus - 10, Thomson - 9
DRO entry for this publication

Tang, Zheng-Xue, Wang, Xungai, Fraser, W.B.* and Wang, Lijing (2006) An investigation of yarn snarling and balloon flutter instabilities in ring spinning, Journal of the textile institute, vol. 97, no. 5, pp. 441-448, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-33749444928
Citation counts: Scopus - 6
DRO entry for this publication

Wang, Jiajun*, Kaynak, Akif, Wang, Lijing and Liu, Xin (2006) Thermal conductivity studies on wool fabrics with conductive coatings, Journal of the textile institute, vol. 97, no. 3, pp. 265-269, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-33745235281
Citation counts: Scopus - 7
DRO entry for this publication

Wang, X.J., Chen, X.B., Hodgson, Peter and Wen, Cui'e (2006) Elastic modulus and hardness of cortical and trabecular bovine bone measured by nanoindentation, Transactions of Nonferrous Metals Society of China, vol. 16, no. 2, Supplement, pp. 744-748, Elsevier B.V., Changsha, China [C1]
ERA journal ID: 4123 – Scopus EID: 2-s2.0-33746828183
Citation counts: Scopus - 15, Thomson - 10
DRO entry for this publication

Wang, Xungai, Chang, Lingli and McGregor, Bruce* (2006) The hairiness of worsted wool and cashmere yarns and the impact of fiber curvature on hairiness, Textile research journal, vol. 76, no. 4, pp. 281-287, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-33746643280
Citation counts: Scopus - 12, Thomson - 11
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard, Dingle, Matthew. and Duncan, J.* (2006) Elastic bending of steel-polymer-steel (SPS) laminates to a constant curvature, Journal of applied mechanics., vol. 73, no. 4, pp. 574-579, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 5140 – Scopus EID: 2-s2.0-33749540139
Citation counts: Scopus - 8, Thomson - 2
DRO entry for this publication

Wen, Cui'e, Yamada, Y.* and Hodgson, Peter (2006) Fabrication of novel TiZr alloy foams for biomedical applications, Materials science & engineering. C, biomimetic materials, sensors and systems., vol. 26, no. 8, pp. 1439-1444, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 5055 – Scopus EID: 2-s2.0-33746704329
Citation counts: Scopus - 39, Thomson - 33
DRO entry for this publication

Xu, W.*, Hu, W.*, Li, M.* and Wen, Cui'e (2006) Sol-gel derived hydroxyapatite/titania biocoatings on titanium substrate, Materials letters, vol. 60, no. 13-14, pp. 1575-1578, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 1005 – Scopus EID: 2-s2.0-33645224954
Citation counts: Scopus - 48, Thomson - 44
DRO entry for this publication

Xu, W.*, Hu, W.*, Li, M.*, Ma, Q.*, Hodgson, Peter and Wen, Cui'e (2006) Sol-gel derived HA/TiO2 double coatings on Ti scaffolds for orthopaedic applications, Transactions of Nonferrous Metals Society of China, vol. 16, no. 1, pp. 209-216, Elesvier B.V., Changsha, China [C1]
ERA journal ID: 4123 – Scopus EID: 2-s2.0-33746784336
Citation counts: Scopus - 13, Thomson - 3
DRO entry for this publication

Xu, Weilin*, Ke, Guizhen*, Wu, Jihong* and Wang, Xungai (2006) Modification of wool fiber using steam explosion, European polymer journal, vol. 42, no. 9, pp. 2168-2173, Elsevier, London, England [C1]
ERA journal ID: 1668 – Scopus EID: 2-s2.0-33746698257
Citation counts: Scopus - 38, Thomson - 35
DRO entry for this publication

Yamada, Yasuo*, Banno, Takumi*, Xie, Z.* and Wen, Cui'e (2006) Compressive deformation behaviour of a closed-cell aluminum, Materials science forum, vol. 510, no. 511, pp. 150-153, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yang, Dengke*, Wen, Cui'e, Han, Fusheng*, Wang, Qing-Zhou* and Li, Hai-Jin* (2006) Preparation of Mg55Ni35Si10 amorphous powders by mechanical alloying and consolidation by vacuum hot pressing, Chinese physics letters, vol. 23, no. 8, pp. 2161-2164, Institute of Physics Publishing, Beijing, China [C1]
ERA journal ID: 958 – Scopus EID: 2-s2.0-33746451705
Citation counts: Scopus - 1
DRO entry for this publication

Yang, Dengke*, Wen, Cui'e, Han, Fusheng* and Yang, Yujie* (2006) Phase formation and physical properties of mechanically alloyed amorphous 55Mg35Ni1OSi, Journal of non-crystalline solids, vol. 352, no. 30-31, pp. 3244-3248, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 4937 – Scopus EID: 2-s2.0-33746795834
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2006) An experimental study of low velocity impact response in 2/2 twill weave composite laminates manufactured by a novel fabrication process, Journal of materials science, vol. 42, no. 1, pp. 232-238, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4930 – Scopus EID: 2-s2.0-33846548640
Citation counts: Scopus - 1
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2006) Characterization and analysis of delamination fracture and nanocreep properties in carbon epoxy composites manufactured by different processes, Journal of composite materials, vol. 40, no. 14, pp. 1287-1299, Technomic Pub. Co., Lancaster, Pa. [C1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-33745588551
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Zhang, Peihua*, Liu, Xin, Wang, Lijing and Wang, Xungai (2006) An experimental study on fabric softness evaluation, International journal of clothing science and technology, vol. 18, no. 2, pp. 83-95, Emerald Group Publishing Ltd, Bingley, England [C1]
ERA journal ID: 123617 – Scopus EID: 2-s2.0-33644503515
Citation counts: Scopus - 4, Thomson - 6
DRO entry for this publication

Dodd, Aaron*, McKinley, Allan*, Saunders, Martin* and Tsuzuki, Takuya (2006) Mechanochemical synthesis of nanocrystalline SnO2-ZnO photocatalysts, Nanotechnology, vol. 17, no. 5, pp. 692-698, Institute of Physics Publishing, Bristol, England [C1.1]
ERA journal ID: 5163 – Scopus EID: 2-s2.0-31044444860
Citation counts: Scopus - 39, Thomson - 32
DRO entry for this publication

Dodd, A. C.*, McKinley, A. J.*, Saunders, M.* and Tsuzuki, T. (2006) Effect of particle size on the photocatalytic activity of nanoparticulate zinc oxide, Journal of nanoparticle research, vol. 8, no. 1, pp. 43-51, Springer Netherlands, Dordrecht, Netherlands [C1.1]
ERA journal ID: 4935 – Scopus EID: 2-s2.0-33646783296
Citation counts: Scopus - 71, Thomson - 65
DRO entry for this publication

Gao, Weimin, Hodgson, Peter D. and Kong, Lingxue* (2006) Numerical analysis of heat transfer and the optimisation of regenerators, Numerical heat transfer, part A, vol. 50, no. 1, pp. 63-78, Taylor & Francis, Philadelphia, Pa. [C1.1]
ERA journal ID: 3804 – Scopus EID: 2-s2.0-33744902861
Citation counts: Scopus - 4, Thomson - 3
DRO entry for this publication

Gorelik, V.S.*, Mikov, S.N.*, Sokolovskii, M.I.* and Tsuzuki, Takuya (2006) Secondary emission of nanocrystalline zinc oxide, Inorganic materials, vol. 42, no. 3, pp. 282-285, MAIK Nauka- Interperiodica, Moscow, Russian Federation [C1.1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Guo, Qipeng, Habrard, Alexia*, Park, Yoosup*, Halley, Peter* and Simon, George* (2006) Phase separation, porous structure, and cure kinetics in aliphatic epoxy resin containing hyperbranched polyester, Journal of polymer science. Part B, Polymer physics, vol. 44, no. 6, pp. 889-899, John Wiley & Sons, New York, N.Y. [C1.1]
ERA journal ID: 1679 – Scopus EID: 2-s2.0-33645135857
Citation counts: Scopus - 36, Thomson - 33
DRO entry for this publication

Kong, Lingxue, Peng, Zheng*, Li, Si-Dong* and Bartold, P. Mark* (2006) Nanotechnology and its role in the management of periodontal diseases, Periodontology 2000, vol. 40, pp. 184-196, Blackwell Munksgaard, Copenhagen, Denmark [C1.1]
ERA journal ID: 32680 – Scopus EID: 2-s2.0-33644864338
Citation counts: Scopus - 12, Thomson - 10
DRO entry for this publication

Liu, Bingquan*, Zhang, Weian*, Zheng, Sixun* and Guo, Qipeng (2006) Competitive specific interactions in miscible blends of poly(hydroxyether terephthalate ester) and poly(4-vinyl pyridine), Journal of polymer science. Part B, Polymer physics, vol. 44, no. 11, pp. 1618-1626, John Wiley & Sons, Malden, Mass. [C1.1]
ERA journal ID: 1679 – Scopus EID: 2-s2.0-33744787869
Citation counts: Scopus - 7, Thomson - 7
DRO entry for this publication

Fox, Bronwyn, Silcock, Michael and Zhang, Jin (2006) Composite research at the Victorian centre for advanced materials manufacturing: quickstep, a disruptive technology for composite manufacture, Facets, vol. 5, no. 3, pp. 23-26, International Union of Materials Research Societies, Argonne, Ill. [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Banno, Takumi*, Xie, Z.*, Yamada, Yasuo* and Wen, Cui'e (2006) Crushing behaviour and mechanical properties of foam-filled circular aluminium tubes, in Nakajima, Hideo and Kanetake, Naoyuki (eds), Porous metals and metal foaming technology : MetFoam 2005 ; JIMIC-4 ; [Kyōto, Japan, September 21 - 23, 2005], pp. 543-546, The Japan Institute of Metals, Kyoto, Japan [E1]
DRO entry for this publication

Bauer, N, Pathirana, Pubudu and Hodgson, Peter (2006) Robust optical flow with combined Lucas-Kanade/Horn-Schunck and automatic neighborhood selection, in Unknown (ed.), Sustainable development through effective man-machine co-existence, pp. 378-383, IEEE Computer Society, New York, NY [E1]
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2006) Microstructural evolution during the annealing of hot worked magnesium alloy AZ31, in Unknown (ed.), Interfacial phenomena in fine particle technology : proceedings of the sixth UBC-McGill-UA International Symposium on Fundamentals in Mineral Processing in honor of professor Janusz S. Laskowski,, pp. 147-156, Canadian Institute of Mining, Metallurgy and Petroleum, Montréal, QC [E1]
DRO entry for this publication

Herring, Mandy, Kelly, Georgina, Mardel, J.*, Hodgkin, J.* and Fox, Bronwyn (2006) Surface analysis of carbon fibre composite laminates for automotive body panels, in Bandyopadhyay, Sri; Zeng, Qinghua; Berndt, Christopher; Rizkalla, Sami; Gowripalan, N.; Matisons, Janis and Samudrala, Saritha (eds), Developments in composites : advanced, infrastructural, natural & nano-composites, pp. 590-595, University of New South Wales, Sydney, N.S.W. [E1]
DRO entry for this publication

Gao, Weimin, Kong, Lingxue*, Fabijanic, Dan and Hodgson, Peter (2006) Computational simulation of the influence of moving solid particles on species diffusion and chemical reactions, in Topping, B.H.V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Fifth International Conference on Engineering Computational Technology, pp. 467-468, Civil-Comp, Kippen [E1]
DRO entry for this publication

Ighaniyan, S., Hall, W., Long, John and Hodgson, Peter (2006) The implementation of the Taguchi method to improve foundry scraps in hot box core production process at Ford casting plant, in Li, Yanxiang; Shen, Houfa; Xu, Quingyan and Han, Zhiqiang (eds), Science and processing of cast iron VIII: proceedings of the 8th International Symposium on Science and Processing of Cast Iron, pp. 446-451, Tsinghua University Press, Beijing, China [E1]
DRO entry for this publication

Ighaniyan, S., Hall, W., Long, John and Hodgson, Peter (2006) A study on veining, burn on sand and distortion of water jacket cores at the Ford casting plant, in Li Yanxiang; Shen Houfa; Xu Quingyan and Han Zhiqiang (eds), Science and processing of cast iron VIII: proceedings of the 8th International Symposium on Science and Processing of Cast Iron, pp. 288-293, Tsinghua University Press, Beijing, China [E1]
DRO entry for this publication

Pathirana, Pubudu, Lim, Allan, Savkin, Andrey* and Hodgson, Peter (2006) Robust video/ultrasonic fusion based estimation for automotive applications, in Unknown (ed.), Integrating manufacturing and services systems, pp. 207-212, IEEE, Piscataway, N.J. [E1]
DRO entry for this publication

Pereira, Michael, Yan, Wenyi and Rolfe, Bernard (2006) Contact pressure and wear in sheet metal forming - an FEM analysis, in Hoffman, Mark and Price, John (eds), SIF 2006 : Conference Proceedings of the International Conference and Exhibition on Structural Integrity and Failure, pp. 73-77, Materials Australia, Sydney, N.S.W. [E1]
DRO entry for this publication

Silcock, M., Hall, W.* and Fox, Bronwyn (2006) Finite element modeling of composite tubular crash structures with an explicit code, in Brosius, Dale (eds), SPE Automotive Composites Conference : 6th annual : Sept 12-14, 2006, Detroit, Mich, SPE, Troy, Mich [E1]
DRO entry for this publication

Wang, Lijing, Zhang, S., Gao, Weimin and Wang, Xungai (2006) Finite element simulation of yarn breakage during knife penetration of woven fabrics, in Topping, B.H.V.; Montero, G. and Montenegro, R. (eds), Proceedings of the Eighth International Conference on Computational Structures Technology, pp. 1-10, Civil-Comp Press, Kippen, United Kingdom [E1]
DRO entry for this publication

Wen, Cui'e, Barnett, Matthew, Vella, J. and Yamada, Y.* (2006) Solid-state foaming of magnesium alloys, in Kanetake, Naoyuki and Nakajima, Hideo (eds), Porous Metals and Metal Foaming Technology: 4th International Conference on Porous Metals and Metal Foaming Technology (METFOAM2005), pp. 165-168, Japan Institute of Metals, Kyoto, Japan [E1]
DRO entry for this publication

Yamada, Yasuo*, Banno, T.*, Xie, Z.* and Wen, Cui'e (2006) Characterisation of aluminium foams using x-ray computed tomography, in Kanetake, Naoyuki and Nakajima, Hideo (eds), Porous metals and metal foaming technology : MetFoam 2005 ; JIMIC-4 ; [Kyōto, Japan, September 21 - 23, 2005], pp. 419-422, The Japan Institute of Metals, Kyoto, Japan [E1]
DRO entry for this publication

Dharmalingam, Sugumar*, Shi, Yanru*, Yu, Zhenxian*, Kong, Lingxue and She, Feng Hua* (2006) Computational investigation of a non-Newtonian fluid flow in a microchannel using surface micro waves, in Kandlikar, S. (eds), ICNMM 2006 : Proceedings of 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM, Limerick, Ireland [E1.1]
DRO entry for this publication

Asgari, Alireza, Lemiale, Vincent*, Sunter, Patrick*, Quenette, Steve*, Hodgson, Peter and Rolfe, Bernard (2006) Application of radial return mapping algorithm for finite strain elastoplasticity in a hybrid finite element and particle-in-cell model, in Liu, W. K. and Chen, J. S. (eds), Proceedings of the 7th World Congress of Computational Mechanics on Computational Bridging of Length Scales in Complex Materials, Los Angeles, California, 20–21 July 2006, World Congress on Computational Mechanics, Los Angeles, Calif. [E2]
DRO entry for this publication

Barnett, Matthew (2006) Ductile failure of magnesium AZ31 : twinning when the c-axis is compressed, in Kainer, Karl U. (eds), Magnesium : proceedings of the 7th International Conference Magnesium Alloys and their Applications, pp. 571-574, Wiley-VCH Verlag, Berlin, Germany [E2]
DRO entry for this publication

Brady, Rex, Naebe, Maryam and Cookson, Peter (2006) The effect of pretreatment with atmospheric helium plasma on colour yields of printed wool fabric, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 1-6, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Cheng, Tong, Lin, Tong, Fang, Jian and Brady, Rex (2006) Photochromic wool fabrics from a hybrid silica coating, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 33-37, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

de Souza, Timothy, Rolfe, Bernard, Duncan, John* and Hodgson, Peter (2006) Quantitative analysis of robustness in a simulated stamping process, in Santos, Abel D. (eds), Drawing the things to come : trends and advances in sheet metal forming ; IDDRG International Deep Drawing Research Group 2006 conference ; June 19 - 21, 2006, Porto, Portugal ; proceedings, pp. 1-8, Instituto de Engenharia Mecânica e Gestô Industrial, Leça do Balio, Portugal [E2]
DRO entry for this publication

Deng, C., Wang, Lijing and Wang, Xungai (2006) An improved model for the limiting irregularity of wool yarns, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 38-41, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Hĺkansson, Eva, Amiet, Andrew* and Kaynak, Akif (2006) Free space measurements of dielectric properties of conducting polymer textiles for electromagnetic interference shielding, Proceedings of the 28th Australasian Polymer Symposium & Australian Society for Biomaterials 16th Annual Conference, pp. 1-2, National Research Centre for Environmental Toxicology, Brisbane, Qld. [E2]
DRO entry for this publication

Hurren, Christopher, Zhang, Maolin*, Liu, Xin and Wang, Xungai (2006) A study of ultrasonic scouring of greasy Australian wool, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 493-497, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Li, Qing, Brady, Rex and Wang, Xungai (2006) Dependence of wool fabric dimensions on temperature and pH, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 53-59, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Li, Zhi, Wang, Xungai, Yan, Wenyi and Wang, Lijing (2006) Modelling airflow for fiber transfer and separation, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 673-678, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Liu, Xin and Wang, Xungai (2006) A comparative study on the felting propensity of animal fibres, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 70-76, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Robertson, L., Hilditch, Tim and Hodgson, Peter (2006) Low-cycle fatigue properties of TRIP steel, MS & T 2006 : Proceedings of the Materials Science & Technology 2006 Conference and Exhibition (MS&T'06), pp. 63-73, MS & T, Cincinnati, Oh. [E2]
DRO entry for this publication

Scott, Robert* and Hodgson, Peter (2006) The tensile behaviour of structural steel with an ultrafine microstructure, Asia Steel International Conference 2006 : Asia Steel '06 : proceedings : May 9-11, 2006 Fukuoka, Japan, pp. 120-127, The Iron and Steel Institute of Japan, Tokyo, Japan [E2]
DRO entry for this publication

Wang, Huimin*, Liu, Xin, Mahar, T.* and Wang, Xungai (2006) The measurement precision and evaluation of the diameter profiles of single wool fibres, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 433-443, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Wang, Lijing, Singh, Avtar and Wang, Xungai (2006) Use of cashmere dehairing technology for coarse alpaca fibers, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 60-64, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Wang, Lijing and Wang, Xungai (2006) Recent research on pilling of wool knitwear, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 601-608, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Weiss, Matthias, Rolfe, Bernard and Hodgson, Peter (2006) The influence of temperature on the springback behavior of metal/polymer-laminates, in Santos, Abel D. and Rocha, Barata da (eds), Drawing the things to come : trends and advances in sheet metal forming ; IDDRG International Deep Drawing Research Group 2006 conference ; June 19 - 21, 2006, Porto, Portugal ; proceedings, pp. 199-206, Instituto de Engenharia Mecânica e Gestô Industrial, Leça do Balio, Portugal [E2]
DRO entry for this publication

Wu, Jihong*, Liu, Xin, Hurren, Christopher and Wang, Xungai (2006) Atmoshperic plasma treatment of wool fabrics for rapid wicking and drying, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 299-305, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Zhang, Junmin, Palmer, Stuart and Wang, Xungai (2006) Objective pilling evaluation of wool fabrics, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 624-631, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Zheng, J.*, Liu, Xin, Brady, Rex and Wang, Xungai (2006) Wool/PTT纤维混纺制品的一浴染色技术研究, in Editorial Department of Journal of Xi'an Polytechnic University (ed.), Proceedings of 2006 China International Wool Textile Conference & IWTO Wool Forum, Xi'an, China, 2006, pp. 42-52, Xi'an Polytechnic University, Xi'an, China [E2]
DRO entry for this publication

Keshavarz, Z. and Barnett, M. R. (2006) Slip during tension testing of Mg-3A1-1Zn sheet, in Kainer, Karl U. (eds), Magnesium : proceedings of the 7th International Conference Magnesium Alloys and their Applications, pp. 588-593, Wiley-VCH Verlag, Berlin, Germany [E2.1]
DRO entry for this publication

Håkansson, Eva, Amiet, Andrew* and Kaynak, Akif (2006) Novel method to determine electromagnetic shielding properties of conducting textiles in 1-18 GHz frequency range : validation, Proceedings of the International Conference on Science and Technology of Synthetic Metals, (ICSM 2006) Trinity College, Dublin, 2-7 July, 2006, p. 1, Trinity College, Dublin, Ireland [E3]
DRO entry for this publication

Akif Kaynak, Lin, Tong, Foitzik, Richard Charles*, Wang, Lijing* and Wang, Xungai (2006) Fibre coating composition, Fibre coating composition, Australian Wool Innovation and Deakin University, Australia (1) [I]
DRO entry for this publication

Silcock, Michael D. (2006) Part and parcel, Crash test technology international, U K I P Media & Events, Surrey, England [M]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2006

Research Income - National Competitive Grants

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2006: $11,000

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2007: $1,092,684
  • 2006: $1,264,790

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2006: $12,557

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $115,391
  • 2007: $113,125
  • 2006: $110,880

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, ARC_Deakin University Australian Postgraduate Award Industry Second Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2008: $69,288
  • 2007: $78,047
  • 2006: $182,166

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council Fellowship - Discovery - Federation Fellowship [T]

  • 2008: $329,089
  • 2007: $322,625
  • 2006: $316,222

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2006: $85,179

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2007: $77,908
  • 2006: $75,907

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2007: $50,000
  • 2006: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2007: $67,007
  • 2006: $63,353

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2006: $137,517

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2006: $124,800

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation Limited Grant - Research [T]

  • 2008: $12,000
  • 2007: $14,000
  • 2006: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2006: $15,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, Australian Research Council Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2008: $110,360
  • 2007: $104,915
  • 2006: $94,417

Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide., Australian Research Council Collaborative - Linkage - Projects (Round 1) [T]

  • 2008: $148,460
  • 2007: $145,549
  • 2006: $142,660

Cookson, P. Engineering Enhancements to Wool Fabrics Through Commercial Atmospheric Plasma Treatments., Australian Wool Innovation Limited [T]

  • 2007: $112,053
  • 2006: $80,000

Muddle, B*, Hodgson, P, Schaffer, G*, Ferry, M*, Ringer, S*, Xia, K*, Nie, J*, Davies, C*, Hutchinson, C*, Barnett, M, Dahle, A*, Caceres, C*, Hoffman, M*, Dunlop, G*, Couper, M*, Embury, J*, Loretto, M*, Humphries, F*, Arnberg, L*, Estrin, Y*, Fraser, H* and Brechet, Y*. Design in Light Metals, Australian Research Council Centre - Centres of Excellence [T]

  • 2008: $609,384
  • 2007: $497,330
  • 2006: $497,330

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]

  • 2008: $72,457
  • 2007: $73,597
  • 2006: $36,696

Hodgson, P. Ductile Bulk Metallic Glass Composites, Australian Research Council - Linkage International [T]

  • 2007: $10,396
  • 2006: $5,000

Halley, P* and Guo, Q. Novel Tough Polymer Composites, Australian Research Council [T]

  • 2007: $57,446
  • 2006: $106,784

Guo, Q. Nanoporous Epoxy Thermosets via Microphase Separation of Block Copolymers, Australian Research Council [T]

  • 2006: $81,151

Kaynak, A. PhD Scholarship - Novel Conducting Polymer Films and Coated Textiles, Australian Wool Innovation Limited Scholarship [T]

  • 2008: $24,181
  • 2007: $5,000
  • 2006: $11,000

Wang, X. FT881 Wool Study Tour 2006, Australian Wool Innovation Limited [T]

  • 2006: $23,970

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology, Department of Innovation, Industry and Regional Development Grant - Centre of Excellence Project [T]

  • 2008: $139,333
  • 2007: $235,000

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]

  • 2008: $119,676
  • 2007: $58,664

Barnett, M, Godet, S*, Yue, S* and Jonas, J*. Mechanisms for Improved Ductility of Magnesium Alloys, Australian Research Council Collaborative - Linkage - International [T]

  • 2008: $15,498
  • 2007: $15,000

Wang, X, Cookson, P, Kikutani, T* and Gao, X*. Advanced polymer fibres with multiple functionalities, Australian Research Council Collaborative - Linkage - International [T]

  • 2008: $8,327
  • 2007: $15,000

Kong, L, She, M and Trengove, R*. Feedwater characterisation, Commonwealth Scientific and Industrial Research Organisation Flagship Collaboration Research Fund [T]

  • 2008: $123,548
  • 2007: $120,237

Wen, C, Yan, W* and Nicholson, G*. Titanium Alloy Scaffolds for Osseointegration Implant Materials, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $84,469
  • 2007: $82,227

Barnett, M and Muddle, B*. Design in Light Metals: Thermohydrogen Processing of titanium., Centres of Excellence, Australian Research Council, Centres of Excellence [T]

  • 2007: $91,461

Mai, Y* and Guo, Q. Nanostructure Design and Toughening of Novel Thermosets, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $89,532

Hodgson, P, Beynon, J*, Strezov, L*, Stanford, N, Dippenaar, R*, Sietsma, J* and Thijsse, B*. Development of new steel products by thin strip casting and direct thermomechanical processing, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $149,000

Lin, T and Wang, X. A New Chlorine-Free Shrink Proofing Technology - A Feasibility Study, Australian Wool Innovation Limited Grant - Research [T]

  • 2008: $47,500

Wang, X. Improving production efficiency, quality and value-adding of rare natural fibres, Rural Industries Research and Development Corporation Grant - Research [T]

  • 2008: $28,000

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2008: $47,685

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI) [T]

  • 2008: $38,250

Research Income - Other Public Sector Funding

Lin, T and Wang, X. Application of Thin Coatings to Textile Substances [U]

  • 2006: $50,000

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology [U]

  • 2006: $125,667

Wang, L, Lin, T, Cookson, P, Hurren, C and Wang, X. Performance fibres and textiles [U]

  • 2008: $8,000
  • 2007: $72,000

Wang, X, Lin, T and Hurren, C. SEED FUNDING FOR Development of broadband electromagnetic spectral managed textile fabrics [U]

  • 2007: $10,000

Lin, T and Wang, X. Tuneable nanostructured electronic textiles based on conducting polymers and carbon nanotubes [U]

  • 2007: $90,000

Lin, T. GHD Early Researchers Award [U]

  • 2008: $4,545

Tsuzuki, T, Wang, X and Zhang, L. Biomaterials and functional textiles [U]

  • 2008: $50,000

Wang, X. Selective sequestering of heavy metal and actinide ions by biopolymer powders derived from silk biopolymer powder derived from silk fibres [U]

  • 2008: $13,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2008: $25,000
  • 2007: $60,000
  • 2006: $50,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V.1]

  • 2006: $397

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2006: $11,775

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2006: $32,698

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2008: $25,872
  • 2007: $95,761
  • 2006: $77,880

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2007: $15,000
  • 2006: $20,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2006: $14,500

Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide. [V.1]

  • 2007: $28,125
  • 2006: $37,500

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness [V.1]

  • 2008: $10,000
  • 2007: $40,000

Wang, X, Cookson, P, Lin, T and Kaynak, A. Bio-medical and healthcare applications of fibres and textiles [V.1]

  • 2007: $7,500
  • 2006: $67,500

Gao, W and Hodgson, P. Simulation of the Heat Treatment Process Intensified by Solid Particles [V.1]

  • 2006: $10,000

Wang, L and Wang, X. Modelling Airflow for Fibre Transfer and Separation [V.1]

  • 2006: $10,000

Barnett, M and Rolfe, B. A multi-scale model of plasticity for magnesium alloys [V.1]

  • 2006: $5,000

Rolfe, B. Multi-scale modelling of Martensitic Transformation in Steel by enhancing StGermain [V.1]

  • 2006: $18,750

Lin, T and Wang, X. PhD Scholarship - Ian Heritage Scholarship [V.1]

  • 2008: $20,000
  • 2006: $40,000

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface [V.1]

  • 2008: $50,000

Wang, L, Wang, X and Yan, W. Impact Simulation of Irregular Fibres [V.1]

  • 2007: $10,000

Forrest, M and Wen, C. Lightweight Composite Armour for Personal Protection [V.1]

  • 2007: $319,725

Rolfe, B. Extending the multi-scale capabilities of Xanthus [V.1]

  • 2007: $12,000

Wen, C. Victorian Centre for Advanced Materials Manufacturing (VCAMM round 2/3): Development of Scaffold metal alloys for biomedical applications [V.1]

  • 2008: $76,725
  • 2007: $200,475

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece [V.1]

  • 2008: $15,000

Hodgson, P and Fabijanic, D. Novel Fluidised Bed Duplex Surface Treatments for Ferrous Materials [V.1]

  • 2008: $61,732

Research Income - Industry and Other Funding - International B (Other Income)

Kong, L. Development of a bio-degradable rubber/polymer base for chewing gum [V.3]

  • 2007: $55,000

Hodgson, P and Dingle, M. Predicting tool life issues of AHSS stampings. [V.3]

  • 2008: $44,881

Research Income - Other Funding Sources

Barnett, M. CAST Metals Manufacturing - A, CRC for CAST Metals Manufacturing [X]

  • 2006: $97,352

Hilditch, T and Hodgson, P. Auto CRC Initial Project 14, Rapid Tooling Development, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $56,910

Barnett, M. Wrought Magnesium Alloys Development, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $200,249
  • 2007: $84,094

Hodgson, P. Light Metals Prototype Structures, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $16,372

Frayman, Y. Melt Handling and Dross Generation, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $36,674
  • 2007: $81,677

Nahavandi, S. Die Casting Productivity, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $85,585

Hilditch, T and Hodgson, P. Auto CRC - MDO C4-04, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $20,132

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $162,614

Hodgson, P and Nikhare, C. The development of low cost, complex shapes from advanced high strength steels using low pressure hydroforming, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $8,000

Higher Degree by Research Completions

2006 - Doctor of Philosophy

Rafael Beltran. Supervisor: Xungai Wang
Thesis entitled: Controlling and Predicting the Pilling Propensity of Knitted Wool Fabrics.

Zhijian Li. Supervisor: Xungai Wang
Thesis entitled: The Mechanical Properties of Natural Fibre Reinforced Cementitious Composites Materials.

Jonathan Mullins. Supervisor: Peter Hodgson
Thesis entitled: Testing and Modelling to Obtain Material Behaviour for Crash Simulations.

Matthias Weiss. Supervisor: Peter Hodgson
Thesis entitled: An Investigation on the Forming Behaviour of Metal/Polymer Laminates.

2006 - Doctor of Technology

Graham Hawkins. Supervisor: Peter Hodgson
Thesis entitled: Opportunity and Risk Management for Complex Oil and Gas Developments.

2006 - Master of Engineering

Dale Atwell. Supervisor: Matthew Barnett
Thesis entitled: Influence of Alloying Additions on the Extrudability of Magnesium.

Hong Xia Wang. Supervisor: Akif Kaynak
Thesis entitled: An Investigation of Polypyrrole Coated Conductive Textiles.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Wednesday 17th September 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010