Research Services Division

Deakin Research

2007 Centre for Material and Fibre Innovation Research Output

Note: The 2012, 2013, 2014 publications have not been audited.

Jump to: Publications | Grants and Consultancies | HDR completions

Publications

Cookson, Peter and Wang, Xungai (2007) Medical applications of fibres and textiles, Deakin University, Geelong, Vic. [A6]
DRO entry for this publication

Cookson, Peter and Wang, Xungai (2007) Nanotechnology applications in fibres and textiles, Deakin University, Centre for Material and Fibre Innovation, Geelong, Vic. [A6]
DRO entry for this publication

Lin, Tong and Wang, Xungai (2007) Controlling the morphologies of electrospun nanofibres, in Brown, P. and Stevens, K. (eds), Nanofibers and nanotechnology in textiles, pp. 90-110, Woodhead, Cambridge, England [B1]
DRO entry for this publication

Palmer, Stuart and Wang, Xungai (2007) Objective assessment of pilling of knitted and nonwoven fabrics using the two dimensional discrete wavelet transform, in Zeng, Xianyi; Li, Yi and Ruan, Da (eds), Computational textile, pp. 23-37, Springer, Berlin, Germany [B1]
DRO entry for this publication

Zou, Linda Y*, Li, Yuncang and Hung, Yung-Tse* (2007) Wet air oxidation for waste treatment, in Wang, Lawrence K and Hung, Yung-Tse (eds), Handbook of Environmental Engineering Volume 5 - Advanced Physicochemical Treatment Technologies, pp. 575-610, Humana Press, Totowa, N.J. [B1]
DRO entry for this publication

Abbod, M. F.*, Sellars, C. M.*, Cizek, Pavel, Linkens, D.* and Mahfouf, M.* (2007) Modeling the flow behavior, recrystallization, and crystallographic texture in hot-deformed Fe-30 Wt Pct Ni Austenite, Metallurgical and materials transactions A : physical metallurgy and materials science, vol. 38, no. 10, pp. 2400-2409, Springer, Berlin, Germany [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-65549114374
Citation counts: Scopus - 3, Thomson - 3
DRO entry for this publication

Adachi, Yoshitaka*, Wakita, Masayuki*, Beladi, Hossein and Hodgson, Peter (2007) The formation of ultrafine ferrite through static transformation in low carbon steels, Acta Materialia, vol. 55, no. 14, pp. 4925-4934, Elsevier Science, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-34447318596
Citation counts: Scopus - 32, Thomson - 29
DRO entry for this publication

Atwell, Dale and Barnett, Matthew (2007) Extrusion limits of magnesium alloys, Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, vol. 38, no. 12, pp. 3032-3041, ASM International, Materials Park, Oh. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-36448964474
Citation counts: Scopus - 23, Thomson - 17
DRO entry for this publication

Banno, Takumi*, Li, Yuncang, Wen, Cui'e and Yamada, Yasuo* (2007) Mechanical properties of micro-porous metals produced by space-holding sintering, Advanced materials research, vol. 29, no. 30, pp. 75-78, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749121582
Citation counts: Scopus - 2
DRO entry for this publication

Barnett, Matthew and Stanford, Nicole (2007) Influence of microstructure on strain distribution in Mg–3Al–1Zn, Scripta materialia, vol. 57, no. 12, pp. 1125-1128, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-34548852862
Citation counts: Scopus - 20, Thomson - 18
DRO entry for this publication

Barnett, Matthew (2007) Twinning and the ductility of magnesium alloys Part II. “Contraction” twins, Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 464, no. 1-2, pp. 8-16, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34248582379
Citation counts: Scopus - 273, Thomson - 243
DRO entry for this publication

Barnett, Matthew and Balasubramanian, R.* (2007) New insights on the mechanism of carbide banding in thermomechanically processed Wootz Steel obtained using electron back scattering diffraction, Indian journal of history of science, vol. 42, no. 4, pp. 633-648, Indian National Science Academy, New Delhi, India [C1]
ERA journal ID: 11338 – Scopus EID: Not tagged
DRO entry for this publication

Barnett, Matthew and Beer, Aiden (2007) A criterion for conventional dynamic recrystallization: Application to magnesium alloys, Materials science forum, vol. 550, pp. 369-374, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Barnett, Matthew (2007) Twinning and the ductility of magnesium alloys Part I: “Tension” twins, Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, vol. 464, no. 1-2, pp. 1-7, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34248531236
Citation counts: Scopus - 326, Thomson - 287
DRO entry for this publication

Barnett, Matthew, Atwell, Dale and Beer, Aiden (2007) Grain size in Mg alloys: recrystallization and mechanical consequences, Materials science forum, vol. 558-559, pp. 433-440, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 6
DRO entry for this publication

Barnett, Matthew (2007) A practical condition for migration dynamic recrystallization, Acta materialia, vol. 55, no. 9, pp. 3271-3278, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-34247167736
Citation counts: Scopus - 8, Thomson - 8
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2007) Microstructural development during hot working of Mg-3AI-1Zn, Metallurgical and materials transactions A-physical metallurgy and materials science, vol. 38A, no. 8, pp. 1856-1867, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-34547547741
Citation counts: Scopus - 60, Thomson - 53
DRO entry for this publication

Beladi, Hossein and Hodgson, Peter (2007) Effect of carbon content on the recrystallization kinetics of Nb-steels, Scripta materialia, vol. 56, no. 12, pp. 1059-1062, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-34247148888
Citation counts: Scopus - 19, Thomson - 15
DRO entry for this publication

Beladi, Hossein and Hodgson, Peter (2007) The recrystallization behaviour of Nb microalloyed steels, Materials science forum, vol. 561, no. 565, pp. 25-28, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Beladi, Hossein and Barnett, Matthew (2007) Influence of aging pre-treatment on the compressive deformation of WE54 alloy, Materials science and engineering A: structural materials; properties, microstructures and processing, vol. 452-453, pp. 306-312, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-33847298521
Citation counts: Scopus - 15, Thomson - 15
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) Ultrafine grained structure formation in steels using dynamic strain induced transformation processing, International materials reviews, vol. 52, no. 1, pp. 14-28, Maney Publishing, London, England [C1]
ERA journal ID: 4910 – Scopus EID: 2-s2.0-33847062908
Citation counts: Scopus - 40, Thomson - 31
DRO entry for this publication

Beladi, Hossein, Kelly, Georgina and Hodgson, Peter (2007) The effect of multiple deformations on the formation of ultrafine grained steels, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 38, no. 3, pp. 450-463, Minerals, Metals & Materials Society, Warrendale, PA. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-34250765772
Citation counts: Scopus - 29, Thomson - 23
DRO entry for this publication

Beltran, Rafael, Wang, Lijing and Wang, Xungai (2007) A controlled experiment on yarn hairiness and fabric pilling, Textile research journal, vol. 77, no. 3, pp. 179-183, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-34548758524
Citation counts: Scopus - 17, Thomson - 16
DRO entry for this publication

Chen, X, Nouri, A, Hodgson, Peter and Wen, Cui'e (2007) Surface modification of TiZr alloy for biomedical application, Advanced materials research, vol. 15, no. 17, pp. 89-94, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-48949119451
Citation counts: Scopus - 8
DRO entry for this publication

Cheng, Tong, Lin, Tong, Fang, Jian and Brady, Rex (2007) Photochromic wool fabrics from a hybrid silica coating, Textile research journal, vol. 77, no. 12, pp. 923-928, Sage Science Press (UK), London, England [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-37349038794
Citation counts: Scopus - 10, Thomson - 14
DRO entry for this publication

Corbett, Tim, Forrest, Mark and Fox, Bronwyn (2007) Investigation of processing conditions of melded parts to determine process boundaries, Materials & manufacturing processes, vol. 22, no. 6, pp. 777-781, Taylor & Francis, London, England [C1]
ERA journal ID: 3642 – Scopus EID: 2-s2.0-34547417696
Citation counts: Scopus - 1, Thomson - 1
DRO entry for this publication

Corbett, Tim, Forrest, Mark, Le Gac, Pierre* and Fox, Bronwyn (2007) Characterization of melded carbon fibre/epoxy laminates, Composites. Part A, Applied science and manufacturing, vol. 38, no. 8, pp. 1860-1871, Pergamon, United Kingdom [C1]
ERA journal ID: 4882 – Scopus EID: 2-s2.0-34447324905
Citation counts: Scopus - 5, Thomson - 4
DRO entry for this publication

Dehghan-Manshadi, A., Barnett, Matthew and Hodgson, Peter (2007) Microstructural evolution during hot deformation of duplex stainless steel, Materials science and technology, vol. 23, no. 12, pp. 1478-1484, Maney Publishing, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 20, Thomson - 11
DRO entry for this publication

Deng, Chuanming, Wang, Lijing and Wang, Xungai (2007) Diameter variations of irregular fibers under different tensions, Fibers and polymers, vol. 8, no. 6, pp. 642-648, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-42449149600
Citation counts: Scopus - 2, Thomson - 2
DRO entry for this publication

Deng, C.M., Wang, Lijing and Wang, Xungai (2007) Modeling the tensile strains of non-uniform fibers, Fibers and polymers, vol. 8, no. 3, pp. 289-294, Korean Fiber Society, Seoul, South Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-35348848401
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Durif, Emilien*, Yan, Wenyi, Yamada, Yasuo* and Wen, Cui'e (2007) Numerical simulation of the crushing of foam-filled aluminium tubes, Key engineering materials, vol. 334, no. 335, pp. 629-632, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-33847043538
DRO entry for this publication

Easton, Mark*, Davies, Chris*, Barnett, Matthew and Pravdic, Franka* (2007) Effect of solidification grain refinement on the development of wrought Mg alloys, Materials science forum, vol. 539, no. 543, pp. 1729-1734, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 5
DRO entry for this publication

Eghbali, B*, Abdollah-Zadeh, A.* and Hodgson, Peter (2007) Dynamic softening of ferrite during large strain warm deformation of a plain-carbon steel, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 462, no. 1-2, pp. 259-263, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34247512869
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Fang, Jian, Lin, Tong, Tian, Wendy*, Sharma, Arnav* and Wang, Xungai (2007) Toughened electrospun nanofibers from crosslinked elastomer-thermoplastic blends, Journal of applied polymer science, vol. 105, no. 4, pp. 2321-2326, Wiley, New York, NY. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-34547168016
Citation counts: Scopus - 7, Thomson - 11
DRO entry for this publication

Foitzik, Richard, Kaynak, Akif and Pfeffer, Frederick (2007) Conductive poly(α,ω-bis(3-pyrrolyl)alkanes)-coated wool fabrics, Synthetic metals, vol. 157, no. 13, pp. 534-539, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-34548406856
Citation counts: Scopus - 8, Thomson - 9
DRO entry for this publication

Foitzik, Richard, Kaynak, Akif and Pfeffer, Frederick (2007) Synthesis and polymerisation of α,ω-bis(3-pyrrolyl)alkanes, Tetrahedron, vol. 63, no. 20, pp. 4237-4242, Pergamon, Oxford, England [C1]
ERA journal ID: 1601 – Scopus EID: 2-s2.0-34047272701
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Foitzik, Richard, Bowen, Elspeth, Taylor, Amelia, Pfeffer, Frederick and Kaynak, Akif (2007) Synthesis and polymerization studies of 3-(+) and (-) -menthyl carboxylate pyrroles, Synthetic metals, vol. 157, no. 22-23, pp. 924-929, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-37849007297
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Finite element simulation of deformation processes of micro-components, Journal of mechanical science and technology, vol. 21, pp. 1456-1463, Springer, Germany [C1]
ERA journal ID: 3782 – Scopus EID: 2-s2.0-35348995076
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Alternating heat transfer between objects of large geometrical difference, Advances in engineering software, vol. 38, no. 11-12, pp. 818-825, Elsevier Applied Science, Barking, Essex, England [C1]
ERA journal ID: 22083 – Scopus EID: 2-s2.0-34447639059
DRO entry for this publication

Gao, Weimin, Kong, Lingxue and Hodgson, Peter (2007) Computational simulation of gas flow and heat transfer near an immersed object in fluidized beds, Advances in engineering software, vol. 38, no. 11-12, pp. 826-834, Elsevier Applied Science, Barking, Essex, England [C1]
ERA journal ID: 22083 – Scopus EID: 2-s2.0-34447636752
Citation counts: Scopus - 7, Thomson - 7
DRO entry for this publication

Garg, Saurabh*, Hurren, Christopher and Kaynak, Akif (2007) Improvement of adhesion of conductive polypyrrole coating on wool and polyester fabrics using atmospheric plasma treatment, Synthetic metals, vol. 157, no. 1, pp. 41-47, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-33846820493
Citation counts: Scopus - 41, Thomson - 43
DRO entry for this publication

Guo, Qipeng, Arends, Peter*, Thomann, Ralf*, Spontak, Richard* and Gronski, Wolfram* (2007) Morphological development and rhelogical changes of phenoxy/san blends during in-situ polymerization, Journal of polymer science. Part B, Polymer physics., vol. 45, no. 18, pp. 2614-2619, John Wiley & Sons Inc., Malden, Mass. [C1]
ERA journal ID: 1679 – Scopus EID: 2-s2.0-34548499577
DRO entry for this publication

Guo, Qipeng, Thomann, Ralf* and Gronski, Wolfram* (2007) Synthesis and fractionated crystallization of organic-inorganic hybrid composite materials from an amphiphilic polyethylene-block-poly (ethylene oxide) diblock copolymer, Polymer, vol. 48, no. 14, pp. 3925-3929, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-34250641531
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Håkansson, Eva, Amiet, Andrew* and Kaynak, Akif (2007) Dielectric characterization of conducting textiles using free space transmission measurements: accuracy and methods for improvement, Synthetic metals, vol. 157, no. 24, pp. 1054-1063, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-38749116226
Citation counts: Scopus - 15, Thomson - 12
DRO entry for this publication

Håkansson, Eva, Amiet, Andrew*, Nahavandi, Saeid and Kaynak, Akif (2007) Electromagnetic interference shielding and radiation absorption in thin polypyrrole films, European polymer journal, vol. 43, no. 1, pp. 205-213, Elsevier Science, Oxford, England [C1]
ERA journal ID: 1668 – Scopus EID: 2-s2.0-33845387396
Citation counts: Scopus - 47, Thomson - 44
DRO entry for this publication

Hilditch, Tim, Toman, S. and Fabijanic, Dan (2007) Post-forming heat treatment of dual phase steel components for automotive applications using a fluid bed furnace, Materials forum, vol. 31, pp. 24-30, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hilditch, Tim, Speer, John* and Matlock, David* (2007) Effect of susceptibility to interfacial fracture on fatigue properties of spot-welded high strength sheet steel, Materials and design, vol. 28, no. 10, pp. 2566-2576, Scientific and Technical Press, Reigate, England [C1]
ERA journal ID: 4961 – Scopus EID: 2-s2.0-34347329212
Citation counts: Scopus - 28, Thomson - 22
DRO entry for this publication

Kumar, Vinod*, Barnett, Matthew, Balasubramanian, R.* and Jaikishan, S.* (2007) Microstructural characterization along the length of a wedge shaped Wootz Steel implement, Indian journal of history of science, vol. 42, no. 4, pp. 609-631, Indian National Science Academy, New Delhi, India [C1]
ERA journal ID: 11338 – Scopus EID: Not tagged
DRO entry for this publication

Lapovok, Rimma* and Hodgson, Peter (2007) Determination of lower-bound ductility for AZ31 magnesium alloy by use of the bulge specimens, Journal of engineering materials and technology, vol. 129, no. 3, pp. 407-413, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 3776 – Scopus EID: 2-s2.0-34547767522
Citation counts: Scopus - 2, Thomson - 3
DRO entry for this publication

Lee, H.-W.*, Kwon, H.-C.*, Im, Y.-T.* and Hodgson, P.D. (2007) Numerical investigation of austenite grain size distribution in square-diamond pass hot bar rolling, Journal of materials processing technology, vol. 191, no. 1-3, pp. 114-118, Elsevier SA, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-34249980964
Citation counts: Scopus - 9, Thomson - 7
DRO entry for this publication

Li, Qing, Brady, P. Rex and Wang, Xungai (2007) Influence of pH on hygral expansion, relaxation shrinkage and extensibility of wool fabric, Fibers and polymers, vol. 8, no. 2, pp. 230-233, Korean Fiber Society, Seoul, South Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-35348877291
Citation counts: Scopus - 4, Thomson - 4
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Lin, Jianguo, Forrest, Mark, Hodgson, Peter and Wen, Cui'e (2007) Mechanical properties and energy absorption of ceramic particulate and resin-impregnation reinforced aluminium foams, Materials forum (CD-ROM), vol. 31, pp. 52-56, Institute of Materials Engineering Australasia Pty Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Li, Zhijian, Wang, Lijing and Wang, Xungai (2007) Cement composites reinforced with surface modified coir fibers, Journal of composite materials, vol. 41, no. 12, pp. 1445-1457, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-34250637222
Citation counts: Scopus - 12, Thomson - 5
DRO entry for this publication

Lin, Jianguo, Xie, Haowen, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2007) Indentation study on the pressure sensitivity of a ZR-based bulk metallic glass, Materials forum (CD-ROM), vol. 31, pp. 139-143, Institute of Materials Engineering Australasia Pty Ltd, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Liu, Jing, Zhang, Ying*, Zhang, Jianming*, Shen, Deyan*, Guo, Qipeng, Takahashi, Isao* and Yan, Shouke* (2007) Stereocomplexation and monolayer morphologies of a stereoregular poly(methylmethacrylate) mixture formed at the air/water surface, Journal of physical chemistry Part C : nanomaterials and interfaces, vol. 111, no. 17, pp. 6488-6494, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 35015 – Scopus EID: 2-s2.0-34249055977
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Liu, Xin and Wang, Xungai (2007) A comparative study on the felting propensity of animal fibers, Textile research journal, vol. 77, no. 12, pp. 957-963, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-37249086606
Citation counts: Scopus - 5, Thomson - 5
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2007) The validation of a multiscale rheological model of discontinuous phenomena during metal rolling, Computational materials science, vol. 41, pp. 236-241, Elsevier BV, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-35848968216
Citation counts: Scopus - 9, Thomson - 6
DRO entry for this publication

Madej, L.*, Paul, H.*, Hodgson, Peter and Pietrzyk, M.* (2007) Possibilities to include in numerical simulation stochastic and discontinuous phenomena occurring in material, Computer methods in materials science, vol. 7, no. 1, pp. 162-167, AKAPIT, Lodz, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2007) Multi-scale rheological model for discontinuous phenomena in materials under deformation conditions, Computational materials science, vol. 38, no. 4, pp. 685-691, Elsevier BV, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-33846263500
Citation counts: Scopus - 20, Thomson - 16
DRO entry for this publication

Madej, Lukasz*, Hodgson, Peter and Pietrzyk, Maciej* (2007) Comparison of the strain distribution obtained from multi scale and conventional approaches to modelling extrusion, Solid state phenomena, vol. 129, pp. 25-30, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 1144 – Scopus EID: 2-s2.0-37649007537
DRO entry for this publication

Muszka, Krzysztof*, Majta, Janusz* and Hodgson, Peter (2007) Modeling of the mechanical behavior of nanostructured HSLA steels, ISIJ international, vol. 47, no. 8, pp. 1221-1227, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-35348815468
Citation counts: Scopus - 14, Thomson - 12
DRO entry for this publication

Naebe, Minoo, Lin, Tong, Tian, Wendy*, Dai, Liming* and Wang, Xungai (2007) Effects of MWNT nanofillers on structures and properties of PVA electrospun nanofibres, Nanotechnology, vol. 18, no. 22, pp. 1-8, IOP Publishing Ltd, Bristol, England [C1]
ERA journal ID: 5163 – Scopus EID: 2-s2.0-34248165128
Citation counts: Scopus - 24, Thomson - 23
DRO entry for this publication

Shaikhzadeh Najar, Saeed*, Kaynak, Akif and Foitzik, Richard C. (2007) Conductive wool yarns by continuous vapour phase polymerization of pyrrole, Synthetic metals, vol. 157, no. 1, pp. 1-4, Elsevier Sequoia, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-33846837565
Citation counts: Scopus - 31, Thomson - 26
DRO entry for this publication

Nouri, A., Chen, X., Hodgson, Peter and Wen, Cui'e (2007) Preparation and characterisation of new titanium based alloys for orthopaedic and dental applications, Advanced materials research, vol. 15-17, pp. 71-76, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749128342
Citation counts: Scopus - 5
DRO entry for this publication

Nouri, Alireza, Lin, Jianguo, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter and Wen, Cui'e (2007) Microstructure evolution of TI-SN-NB alloy prepared by mechanical alloying, Materials forum (CD-ROM), vol. 31, pp. 64-70, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Pathirana, Pubudu, Lim, A., Savkin, Andrey* and Hodgson, Peter (2007) Robust video/ultrasonic fusion-based estimation for automotive applications, IEEE transactions on vehicular technology, vol. 56, no. 4, pp. 1631-1639, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, N.J. [C1]
ERA journal ID: 5074 – Scopus EID: 2-s2.0-34547555847
Citation counts: Scopus - 10, Thomson - 8
DRO entry for this publication

Pereira, Michael, Yan, Wenyi and Rolfe, Bernard (2007) Modeling of contact pressure in sheet metal forming, Materials Science Forum, vol. 561, no. 565, pp. 1975-1978, Trans Tech Publications Ltd, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 7
DRO entry for this publication

Pereloma, E.*, Timokhina, Ilana*, Miller, M.* and Hodgson, Peter (2007) Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels, Acta materialia, vol. 55, no. 8, pp. 2587-2598, Elsevier Science Pub., New York, NY [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-34047116894
Citation counts: Scopus - 49, Thomson - 46
DRO entry for this publication

Shokouhi, A. and Hodgson, Peter (2007) Dynamic adjustment of ferrite grains during dynamic strain induced transformation, Materials science and technology, vol. 23, no. 10, pp. 1233-1242, Maney Publishing, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10, Thomson - 7
DRO entry for this publication

Stanford, Nicole, Chen, Ke*, Dunne, Druce* and Jin, Xue-jun* (2007) Effect of alloying additions on the SFE, Neél temperature and shape memory effect in Fe–Mn–Si-based alloys, ISIJ international, vol. 47, no. 6, pp. 883-889, Iron and Steel Institute of Japan, Toyko, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-34548036948
Citation counts: Scopus - 6, Thomson - 5
DRO entry for this publication

Tang, Zheng-Xue, Fraser, W. Barrie* and Wang, Xungai (2007) Modelling yarn balloon motion in ring spinning, Applied mathematical modelling, vol. 31, no. 7, pp. 1397-1410, Elsevier, New York, NY. [C1]
ERA journal ID: 48 – Scopus EID: 2-s2.0-33846642615
Citation counts: Scopus - 14, Thomson - 13
DRO entry for this publication

Timokhina, Ilana*, Hodgson, Peter, Ringer, S.*, Zheng, R.* and Pereloma, E.* (2007) Characterization of nano-scale particles in hot-rolled, high strength low alloy steels (HSLA), Materials science forum, vol. 561-565, pp. 2083-2086, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Timokhina, Ilana*, Hodgson, Peter, Ringer, S*, Zheng, R.* and Pereloma, E.* (2007) Precipitate characterisation of an advanced high-strength low-alloy (HSLA) steel using atom probe tomography, Scripta materialia, vol. 56, no. 7, pp. 601-604, Elsevier, New York, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-33846505968
Citation counts: Scopus - 36, Thomson - 27
DRO entry for this publication

Timokhina, Ilana*, Hodgson, Peter and Pereloma, E.* (2007) Transmission electron microscopy characterization of the bake-hardening behavior of transformation-induced plasticity and dual-phase steels, Metallurgical and materials transactions A - Physical metallurgy and materials science, vol. 38, no. 10, pp. 2442-2454, Minerals, Metals & Materials Society, Warrendale, PA. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-42349094097
Citation counts: Scopus - 22, Thomson - 26
DRO entry for this publication

Timokhina, Ilana*, Pereloma, E.* and Hodgson, Peter (2007) Effect of initial processing on the microstructure-property relationships in bake-hardened C-Mn-Si TRIP steels, Materials science forum, vol. 539-543, pp. 4315-4320, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Wang, Hongxia, Ding, Jie*, Lee, Bin*, Wang, Xungai and Lin, Tong (2007) Polypyrrole-coated electrospun nanofibre membranes for recovery of Au(III) from aqueous solution, Journal of membrane science, vol. 303, no. 1-2, pp. 119-125, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1677 – Scopus EID: 2-s2.0-34548337189
Citation counts: Scopus - 30, Thomson - 28
DRO entry for this publication

Wang, H.*, Mahar, T.*, Liu, Xin and Wang, Xungai (2007) Measurement precision and evaluation of the diameter profiles of single wool fibers, Textile research journal, vol. 77, no. 12, pp. 981-991, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-37249020866
Citation counts: Scopus - 5, Thomson - 3
DRO entry for this publication

Wang, X., Li, Y., Hodgson, Peter and Wen, Cui'e (2007) Nano- and macro-scale characterisation of the mechanical properties of bovine bone, Materials forum, vol. 31, pp. 156-159, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Weiss, M., Dingle, Matthew, Rolfe, Bernard and Hodgson, Peter (2007) The influence of temperature on the forming behavior of metal/polymer laminates in sheet metal forming, Journal of engineering materials and technology, vol. 129, no. 4, pp. 530-537, American Society of Mechanical Engineers, New York, N.Y. [C1]
ERA journal ID: 3776 – Scopus EID: 2-s2.0-36049019926
Citation counts: Scopus - 10, Thomson - 7
DRO entry for this publication

Wen, Cui'e, Yamada, Y.*, Nouri, A. and Hodgson, Peter (2007) Porous titanium with porosity gradients for biomedical applications, Materials science forum, vol. 539-543, pp. 720-725, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 10
DRO entry for this publication

Wen, Cui'e, Xu, W.*, Hu, W.* and Hodgson, Peter (2007) Hydroxyapatite/titania sol-gel coatings on titanium-zirconium alloy for biomedical applications, Acta biomaterialia, vol. 3, pp. 403-410, Elsevier, Amsterdam, Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-34147119678
Citation counts: Scopus - 78, Thomson - 64
DRO entry for this publication

Xia, We*, Hsu, H* and Kong, L. (2007) A cFD-aided experimental study on bending of micro glass pipettes, Journal of mechanical science and technology, vol. 21, pp. 1338-1345, Korean Society of Mechnical Engineers, Seoul, Korea [C1]
ERA journal ID: 3782 – Scopus EID: 2-s2.0-35349008687
DRO entry for this publication

Xie, Haowen, Lin, Jianguo, Li, Yuncang, Hodgson, Peter and Wen, Cui'e (2007) Composition dependency of the glass forming ability (GFA) in Mg—Ni—Si system by mechanical alloying, Materials science and engineering A: Structural materials: properties, microstructures and processing, vol. 459, no. 1-2, pp. 35-39, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34247115927
Citation counts: Scopus - 6, Thomson - 4
DRO entry for this publication

Xiong, Jianyu, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter and Wen, Cui'e (2007) Processing and mechanical properties of porous titanium-niobium shape memory alloy for biomedical applications, Materials science forum, vol. 561, no. 565, pp. 1689-1692, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 4
DRO entry for this publication

Xiong, J., Li, Y., Hodgson, Peter and Wen, Cui'e (2007) TiNi shape memory alloy foams synthesized by spacer sintering and their properties, Journal of materials science & engineering, vol. 25, no. 6, pp. 892-894, Zhejiang Daxue, Cailiao Yu Huaxue Gongcheng Xueyuan, Zhejiang, China [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Xu, Weilin*, Wang, Xin*, Li, Wenbin*, Peng, Xuqiang*, Liu, Xin* and Wang, Xungai (2007) Characterization of superfine wool powder/poly(propylene) blend film, Macromolecular materials and engineering, vol. 292, no. 5, pp. 674-680, Wiley - VCH Verlag GmbH & Co. KGaA, Weinheim, Germany [C1]
ERA journal ID: 1682 – Scopus EID: 2-s2.0-34347228176
Citation counts: Scopus - 19, Thomson - 19
DRO entry for this publication

Yamada, Yasuo*, Banno, Takumi*, Xie, Z.*, Li, Yuncang and Wen, Cui'e (2007) Preparation and characterisation of open-cell microporous nickel, Materials science forum, vol. 539, no. 543, pp. 1833-1838, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Yamada, Yasuo*, Li, Yuncang, Banno, Takumi*, Xie, Z.* and Wen, Cui'e (2007) Micro-porous nickel produced by powder metallurgy, Materials science forum, vol. 534, no. 536, pp. 977-980, Trans Tech Publications, Uetikon-Zuerich, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yan, W., Durif, E.*, Yamada, Y.* and Wen, Cui'e (2007) Crushing simulation of foam-filled aluminium tubes, Materials transactions, vol. 48, no. 7, pp. 1901-1906, Japan Institute of Metals, Sendai, Japan [C1]
ERA journal ID: 4807 – Scopus EID: 2-s2.0-34548036472
Citation counts: Scopus - 4, Thomson - 5
DRO entry for this publication

Yang, Chunhui, Hodgson, Peter, Liu, Q.* and Ye, L.* (2007) Three-dimensional Finite Element modelling of laser shock peening process, Materials science forum, vol. 561-565, pp. 2261-2264, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal list
Citation counts: Scopus - 3
DRO entry for this publication

Yang, Chunhui, Su, Z.*, Ye, L.*, Zhou, L.* and Hodgson, Peter (2007) A signal processing approach for elastic wave-based structural health monitoring using active piezoelectrics, Key engineering materials, vol. 334-335, pp. 1141-1144, Trans Tech Publications, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 8144 – Scopus EID: 2-s2.0-33847080860
DRO entry for this publication

Yang, C., Sabirov, I., Mullins, J., Yazdipour, N., Asgari, A. and Hodgson, P. (2007) Structure-property relations of metallic materials with multiscale microstructures, Materials forum (CD-ROM), vol. 31, pp. 177-185, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yang, Y.*, Han, F.*, Wen, Cui'e and Shu, Y.* (2007) Damping properties of open cell microcellular pure Al foams, Materials science and technology, vol. 23, no. 11, pp. 1336-1340, Maney Publishing, London, England [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yazdipour, N., Davies, C.* and Hodgson, Peter (2007) Simulation of dynamic recrystallization using random grid cellular automata, Computer methods in materials science, vol. 7, no. 1, pp. 168-174, Publishing House AKAPIT, Krakow, Poland [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yazdipour, N., Dehghan-Manshadi, A., Davies, C.* and Hodgson, Peter (2007) Simulation of dynamic recrystallization using irregular cellular automata, Materials forum (CD-ROM), vol. 31, pp. 164-176, Institute of Materials Engineering Australasia, North Melbourne, Vic. [C1]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Yu, Gengsheng*, Lin, Jianguo, Ma, Mo*, Wang, Xiufeng*, Wang, Fenghua* and Wen, Cui'e (2007) Effect of relaxation on pressure sensitivity index in a Zr-based metallic glass, Materials science & engineering. A, Structural materials, vol. 460, no. 461, pp. 58-62, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-34247218102
Citation counts: Scopus - 23, Thomson - 22
DRO entry for this publication

Zhang, Jin and Fox, Bronwyn (2007) Manufacturing influence on the delamination fracture behavior of the T800H/3900-2 carbon fiber reinforced polymer composites, Materials & manufacturing processes, vol. 22, no. 6, pp. 768-772, Taylor & Francis Inc, United States [C1]
ERA journal ID: 3642 – Scopus EID: 2-s2.0-34547473722
Citation counts: Scopus - 14, Thomson - 8
DRO entry for this publication

Zhang, Junmin, Wang, Xungai and Palmer, Stuart (2007) Objective grading of fabric pilling with wavelet texture analysis, Textile research journal, vol. 77, no. 11, pp. 871-879, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-36949006289
Citation counts: Scopus - 18, Thomson - 19
DRO entry for this publication

Zhang, Junmin, Wang, Xungai and Palmer, Stuart (2007) Objective pilling evaluation of wool fabrics, Textile research journal, vol. 77, no. 12, pp. 929-936, Sage, Thousand Oaks, Calif. [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-37249042158
Citation counts: Scopus - 17, Thomson - 16
DRO entry for this publication

Zhang, Weian*, Zheng, Sixun* and Guo, Qipeng (2007) Synthesis and characterization of dendritic star-shaped poly (ε-caprolactone)-block-poly(L-lactide) block copolymers, Journal of applied polymer science, vol. 106, no. 1, pp. 417-424, John Wiley & Sons, New York, N.Y. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-34548486280
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Chen, Ying, Chen, Hua*, Yu, Jun*, Williams, James S.* and Craig, Vince* (2007) Focused ion beam milling as a universal template technique for patterned growth of carbon nanotubes, Applied physics letters, vol. 90, no. 9, pp. 1-3, American Institute of Physics, New York, N.Y. [C1.1]
ERA journal ID: 949 – Scopus EID: 2-s2.0-33847664558
Citation counts: Scopus - 2
DRO entry for this publication

Cross, Sheree*, Innes, Brian*, Roberts, Michael S.*, Tsuzuki, Takuya, Robertson, Terry A.* and McCormick, P.G.* (2007) Human skin penetration of sunscreen nanoparticles : in-vitro assessment of a novel micronized zinc oxide formulation, Skin pharmacology and physiology, vol. 20, no. 3, pp. 148-154, S. Karger AG, Basel, Switzerland [C1.1]
ERA journal ID: 14861 – Scopus EID: 2-s2.0-33947308035
Citation counts: Scopus - 177, Thomson - 159
DRO entry for this publication

Deng, Chuanming, Wang, Lijing and Wang, Xungai (2007) Improving limiting irregularity and effective fineness models for wool yarn, Research journal of textile and apparel, vol. 11, no. 2, pp. 1-7, Hong Kong Institution of Textile and Apparel, Hong Kong [C1.1]
ERA journal ID: 3546 – Scopus EID: Not tagged
DRO entry for this publication

Dodd, Aaron*, McKinley, Allan*, Tsuzuki, Takuya and Saunders, Martin* (2007) Optical and photocatalytic properties of nanocrystalline TiO2 synthesised by solid-state chemical reaction, Journal of physics and chemistry of solids, vol. 68, no. 12, pp. 2341-2348, Pergamon, Oxford, England [C1.1]
ERA journal ID: 1109 – Scopus EID: 2-s2.0-36248970117
Citation counts: Scopus - 9, Thomson - 9
DRO entry for this publication

Hilditch, Tim, Speer, J.* and Matlock, D.* (2007) Influence of low-strain deformation characteristics of high strength sheet steel on curl and springback in bend-under-tension tests, Journal of materials processing technology, vol. 182, no. 1-3, pp. 84-94, Elsevier BV, Amsterdam, The Netherlands [C1.1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-33750611022
Citation counts: Scopus - 15, Thomson - 12
DRO entry for this publication

Silcock, Michael D., Garschke, Claudia, Hall, Wayne and Fox, Bronwyn (2007) Rapid composite tube manufacture utilizing the quickstep™ process, Journal of composite materials, vol. 41, no. 8, pp. 965-978, Sage Science Press (UK), Lancaster, Pa. [C1.1]
ERA journal ID: 4918 – Scopus EID: 2-s2.0-34347337521
Citation counts: Scopus - 3, Thomson - 2
DRO entry for this publication

Tan, Chao-Gui*, Jiang, Wen-juan*, Wu, Xue-qing*, Wang, Xiu-feng* and Lin, Jianguo (2007) Effect of crystallization on corrosion resistance of Cu52.5Ti30Zr11.5Ni6 bulk amorphous alloy, Nonferrous metals society of china, transactions, vol. 17, no. 4, pp. 751-754, Elesvier B.V., Changsha, China [C1.1]
ERA journal ID: 4123 – Scopus EID: 2-s2.0-34548706977
DRO entry for this publication

Wang, Xiufeng*, Wu, Xueqing*, Lin, Jianguo and Ma, Mo* (2007) The influence of heat treatment on the corrosion behaviour of as-spun amorphous Al88Ni6La6 alloy in 0.01 M NaCl solution, Materials letters, vol. 61, no. 8-9, pp. 1715-1717, Elsevier BV, Amsterdam, Netherlands [C1.1]
ERA journal ID: 1005 – Scopus EID: 2-s2.0-33847618369
Citation counts: Scopus - 12, Thomson - 9
DRO entry for this publication

Wu, Xueqing*, Ma, Mo*, Tan, Chaogui*, Wang, Xiufeng* and Lin, Jianguo (2007) Comparative study on thermodynamical and electrochemical behavior of Al88Ni6La6 and Al86Ni6La6Cu2 amorphous alloys, Journal of rare earths, vol. 25, no. 3, pp. 381-384, Elsevier BV, Amsterdam, Netherlands [C1.1]
ERA journal ID: 4797 – Scopus EID: 2-s2.0-34250862093
Citation counts: Scopus - 4, Thomson - 1
DRO entry for this publication

Xia, Wei, Hsu, Hung-Yao, Kong, Lingxue, Evans, Allan* and Lee, Ryan* (2007) A potential application of a piezoelectric atomiser for ophthalmic drug delivery, Applied bionics and biomechanics, vol. 4, no. 1, pp. 9-17, Taylor & Francis, Abingdon, England [C1.1]
ERA journal ID: 44643 – Scopus EID: 2-s2.0-49549100686
DRO entry for this publication

Cookson, Peter, Wang, Xungai and White, B.* (2007) Innovative products in the Australian textile industry : a case study in medical applications for textiles, Textile review, vol. 2, no. 10, pp. 151-160, Jay Narayan Vyas Saket Projects Limited, Panchsheel, India [C3]
ERA journal ID: Not matching ERA journal list
DRO entry for this publication

Hurren, Christopher, Kaynak, Akif and Wang, Xungai (2007) Effects of laundering on conductivity of polypyrrole-coated textiles, Research journal of textile and apparel, vol. 11, no. 3, pp. 11-17, Hong Kong Institution of Textile and Apparel, Kowloon, Hong Kong [C3]
ERA journal ID: 3546 – Scopus EID: Not tagged
DRO entry for this publication

Wang, Lijing, Zhang, Shu, Gao, Weimin and Wang, Xungai (2007) FEM analysis of knife penetration through woven fabrics, Computer modeling in engineering and sciences, vol. 20, no. 1, pp. 11-20, Tech Science Press, Palmdale, Calif. [C3]
ERA journal ID: 3460 – Scopus EID: 2-s2.0-34547767567
Citation counts: Scopus - 9
DRO entry for this publication

Atwell, Dale and Barnett, Matthew (2007) Extrudability of magnesium alloys, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 145-150, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
DRO entry for this publication

Barnett, Matthew (2007) Twinning and ductile failure of Mg-3Al-1Zn, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 29-32, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
DRO entry for this publication

Beer, Aiden and Barnett, Matthew (2007) The microstructural evolution in hot worked and annealed magnesium alloys, in Unknown (ed.), Diffusion in advanced materials and processing : selected, peer reviewed papers from the Symposium TMS 136th Annual Meeting and Exhibition, pp. 427-432, Trans Tech Publications, Stafa-Zuerich, Switzerland [E1]
DRO entry for this publication

Beladi, Somaieh, Pathirana, Pubudu and Hodgson, Peter (2007) Planar receiver placement for unique emitter localization for indoor applications, in Unknown (ed.), 3rd IEEE International Conference on Wireless and Mobile Computing, Networking and Communications, pp. 1-6, Institute of Electrical and Electronics Engineers (IEEE), Piscataway, N.J. [E1]
DRO entry for this publication

Brighton, Aaron, Luedtke, Ben*, Brosius, Dale*, Starbuck, Mike*, Erdman, Donald* and Fox, Bronwyn (2007) Strain rate effects on the energy absorption of rapidly manufactured composite tubes, in Brosius, Dale (eds), ACCE 2007 7th Annual Automotive Composites Conference & Exhibition, pp. 1-13, SPE Automotive & Composites Divisions, Troy, Mi. [E1]
DRO entry for this publication

Chen, Xiaobo, Li, Yuncang, Lin, Jianguo, Hodgson, Peter, Usher, B* and Wen, Cui'e (2007) Assessment of bioactivity of zirconium and titanium-zirconium alloy, in Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. (eds), Ti-2007, science and technology : proceedings of the 11th World Conference on Titanium (JIMIC5), pp. 1739-1742, Japan Institute of Metals, Sendai, Japan [E1]
DRO entry for this publication

Coenen, Victoria*, Walker, Andrew*, Day, Richard*, Nesbitt, Alan*, Zhang, Jin and Fox, Bronwyn (2007) The effect of cure cycle heating rate on the fibre/matrix interface, in Sorensen, B.F.; Mikkelsen, L.P.; Lilholt, H.; Goutianos, S. and Abdul-Mahdi, F.S. (eds), Proceedings of the 28th Risø International Symposium on Materials Science: Interface Design of the Polymer Matrix Composites - Mechanics, Chemistry, Modelling and Manufacturing, pp. 157-164, Riso National Laboratory, Roskilde, Denmark [E1]
DRO entry for this publication

Collins, Paul K., Mullins, Jonathan G., Rolfe, Bernard and Hodgson, Peter (2007) Modelling factors of square tubes in high speed bending situations, in Unknown (ed.), SAE 2007 World Congress, pp. 1-6, SAE International, Warrendale, Pa. [E1]
DRO entry for this publication

Håkansson, Eva and Kaynak, Akif (2007) Conducting polymer coated fabrics for potential applications in microwave frequencies : a study of electromagnetic properties, in Sariisik, Merih and Karabay, Gulseren (eds), 3rd International Technical Textiles Congress, pp. 156-164, Meta Basim Press, Turkey [E1]
DRO entry for this publication

Muszka, K.*, Majta, Janusz* and Hodgson, Peter (2007) Studying of grain size effect on the deformation behavior of microalloyed steels, in Unknown (ed.), MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 493-504, MS & T, Detroit, Michigan [E1]
DRO entry for this publication

Pled, Florent*, Yan, Wenyi* and Wen, Cui'e (2007) Crushing modes of aluminium tubes under axial compression, in Veidt, Martin; Albermani, Faris; Daniel, Bill; Griffiths, John; Hargreaves, Doug; McAree, Ross; Meehan, Paul and Tan, Andy (eds), Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, pp. 178-183, Engineers Australia, Brisbane, Qld. [E1]
DRO entry for this publication

Timokhina, Ilana, Hodgson, Peter, Ringer, S.P.*, Zheng, R.K.* and Pereloma, E.V.* (2007) Nano-scale microstructural characterisation of modern high strength steels for the automotive industry, in Ashburn, Ronald E.; Brown, Christopher P.; Davis, Carolyn A. and Oldham, Lisa C. (eds), Proceedings of the International Conference on Microalloyed Steels: Processing, Microstructure, Properties and Performance, pp. 305-312, Association for Iron & Steel Technology, Pittsburgh, Pennsylvania [E1]
DRO entry for this publication

Xiong, J., Li, Y., Hodgson, Peter and Wen, Cui'e (2007) Preparation and characterization of TiNi shape memory alloy foams by powder metallurgy, in Niinomi, M.; Akiyama, S.; Ikeda, M.; Hagiwara, M. and Maruyama, K. (eds), Ti-2007, science and technology : proceedings of the 11th World Conference on Titanium (JIMIC5), pp. 1545-1548, The Japan Institute of Metals, Sendai, Japan [E1]
DRO entry for this publication

Kong, Lingxue, She, F. H., Gao, Weimin, Nahavandi, Saeid and Hodgson, Peter (2007) Integrated optimization system for high pressure die casting processes, in Unknown (ed.), AMPT 2007 : 10th International Conference on Advances in Materials and Processing Technologies, Daejeon, Korea, 07-11 October 2007, pp. 629-634, Elsevier, Amsterdam, The Netherlands [E1.1]
Citation counts: Thomson - 9
DRO entry for this publication

She, F. H., Gao, D*, Gao, W. M., Wu, D. Y.*, Peng, Z., Hoang, M.* and Kong, L. X. (2007) Characterization of membranes with X-ray ultramicroscopy, in Unknown (ed.), IMSTEC 2007 : Proceedings of the 6th International Membrane Science and Technology Conference 2007, p. 1, UNESCO Centre for Membrane Science and Technology, Kensington, N. S. W. [E1.1]
DRO entry for this publication

Lin, Tong and Wang, Xungai (2007) Recent advances in electrospinning of nanofibres, ICVFTM 2007 : Proceedings of the 4th International Conference on Advanced Fiber/Textile Materials, pp. 33-36, Faculty of Textile Science and Technology, Shinshu University, Ueda, Japan [E2]
DRO entry for this publication

Lin, Tong, Fang, J., Wang, H., Niu, H. and Wang, Xungai (2007) Morphology evolution in electrospinning of PAN nanofibres, Nano for the 3rd Millennium : a look at nanofiber technologies and applications : proceedings of the conference : October 17th and 18th, 2007, Prague, pp. 41-46, Elmarco, Prague, Czech Republic [E2]
DRO entry for this publication

Madej, L.*, Gawad, Jerzy*, Hodgson, Peter and Pietrzyk, M.* (2007) Contribution to digital representation of materials subjected to thermomechanical processing, MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 403-414, MS & T, Detroit, Michigan [E2]
DRO entry for this publication

Mullins, Jonathan, Hodgson, Peter and Hilditch, Tim (2007) Stress response of advanced high strength steels using tapered tensile specimens and digital image correlation method, MS & T 2007 : Exploring structure, processing and applications across multiple material systems : MS&T '07, Materials Science & Technology 2007 Conference and Exhibition, September 16 - 20, 2007, COBO Center, Detroit, Michigan ; conference proceedings, pp. 85-98, MS & T, Detroit, Michigan [E2]
DRO entry for this publication

Naebe, M., Rippon, J. A., Brady, P. R., Wang, X., Brack, N.*, van Riessen, G.* and Cookson, P. (2007) Effects of atmospheric pressure plasma on dye uptake by the surface of wool, in Jiri Militky, Ing (eds), TEXSCI 2007 : 6th International Conference on Textile Science, pp. 1-10, Technical University of Liberec, Czech Republic, Liberec, Czech Republic [E2]
DRO entry for this publication

Nuhiji, B., Forrest, M., Mitchell, D.* and Fox, B. L. (2007) Structure and morphology of nanocomposites, in Whittaker, Andrew (eds), APS 2007 : 29th Australasian Polymer Symposium : 11-15 February 2007, Hotel Grand Chancellor, Hobart Tasmania : 29 APS : conference handbook, p. 117, Royal Australian Chemical Institute, Hobart, Tas. [E2]
DRO entry for this publication

Rajkhowa, R., Wang, Lijing and Wang, Xungai (2007) Fabrication and characterisation of ultra-fine powders from mulberry, eri and muga silk fibres, Researches and progresses of modern technology on silk, textile and mechanicals : the 6th China International Silk Conference and the 2nd International Textile Forum, pp. 154-164, Chemical Industry Press, Suzhou, China [E2]
DRO entry for this publication

Wang, Lijing, Rajkhowa, R. and Wang, Xungai (2007) Eri silk fibre attributes and sliver preparation, Researches and progresses of modern technology on silk, textile and mechanicals : the 6th China International Silk Conference and the 2nd International Textile Forum, pp. 165-173, Chemical Industry Press, Suzhou, China [E2]
DRO entry for this publication

Yang, Chunhui, Hodgson, Peter, Liu, Qianchu* and Ye, Lin* (2007) Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening, AMPT 2007 : 10th International Conference on Advances in Materials and Processing Technologies, Daejeon, Korea, 07-11 October 2007, pp. 709-718, Elsevier, Amsterdam, The Netherlands [E2]
Citation counts: Scopus - 31, Thomson - 24
DRO entry for this publication

Naebe, Minoo, Lin, Tong, Tian, Wendy* and Wang, Xungai (2007) Enhancing the mechanical properties of electrospun carbon nanotubes/poly(vinyl alcohol) nanofibre membrane through post-treatments, in Whittaker, Andrew (eds), APS 2007 : 29th Australasian Polymer Symposium : 11-15 February 2007, Hotel Grand Chancellor, Hobart Tasmania : 29 APS : conference handbook, pp. 122-123, Royal Australian Chemical Institute, Hobart, Tas. [E2.1]
DRO entry for this publication

Fabijanic, Dan and Hodgson, Peter (2007) A new duplex surface modifcation process using fluid bed CVD, Thermal processing and surface engineering : key activities in the global knowledge economy ; the 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) congress ; 30th October to 1st November 2007, Brisbane, Australia ; proceed, p. 115, Materials Australia, Melbourne, Vic. [E3]
DRO entry for this publication

Fang, J., Wang, H., Lin, T. and Wang, X. (2007) Evolution of fibre morphologies during electrospinning of PAN nanofibres, ChinaNano 2007 : proceedings of the 2nd China International Conference on Nanoscience and Technology, Beijing, June 4 - 6, 2007, p. 51, National Center for Nanoscience and Technology, China, Beijing, China [E3]
DRO entry for this publication

Guo, Qipeng (2007) High performance thermosets for aircraft construction a new strategy for toughening resin systems, Advanced technology for a future JSF : the third Australian JSF Advanced Technology and Innovation Conference, p. 13, Department of Defence, Australian Government [E3]
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Forrest, Mark, Hodgson, Peter and Wen, Cui'e (2007) Mechanical property and energy absorption of aluminium foams under dynamic and quasi-static compression, TMS 2007 : 136th Annual Meeting and Exhibition, p. 184, The Minerals, Metals and Materials Society (TMS), United States [E3]
DRO entry for this publication

Li, Yuncang, Xiong, Jianyu, Hodgson, Peter and Wen, Cui'e (2007) Shape memory alloy scaffolds for bone tissue engineering, TMS 2007 : 136th Annual Meeting and Exhibition, p. 125, The Minerals, Metals and Materials Society (TMS), United States [E3]
DRO entry for this publication

Naebe, M., Lin, T. and Wang, X. (2007) Electrospun SWNTs/PVA composite nanofibres : polymer morphology and structure-property relationships, ChinaNano 2007 : proceedings of the 2nd China International Conference on Nanoscience and Technology, Beijing, June 4 - 6, 2007, p. 6, National Center for Nanoscience and Technology, China, Beijing, China [E3]
DRO entry for this publication

Sun, L., Rippon, J.A., Cookson, P.G., Wang, X., King, K.*, Koulaeva, O.* and Beltrame, R.* (2007) Polymer coatings containing nano particles of zinc oxide for the UV protection of dyed polyester fabrics, ARNAM 2007 : Australian Research Network for Advanced Materials Annual Workshop : Conference Booklet, Australian National University, Canberra, A.C.T. [E3.1]
DRO entry for this publication

Easton, Mark*, Dunlop, Gordon*, Abbott, Trevor*, Gibson, Mark*, Bettles, Colleen*, Davies, Chris*, Barnett, Matthew and Beer, Aiden (2007) Mg alloy research in the CAST co-operative research centre, Workshop on Advanced Magnesium Alloys and their Applications, pp. 8-11, Shanghai Jiao Tong University, Shanghai, China [EN]
DRO entry for this publication

Grants and Consultancies

Grants with funding during 2007

Research Income - National Competitive Grants

Kaynak, A, Wang, L and Wang, X. Coloured Conductive Textiles, Aust'n Wool Innov'n P/L [T]

  • 2006: $11,000

Wang, X, Zhang, J, Li, Q and Deng, C. China Australia Wool Innovation Network (CAWIN), Australian Wool Innovation AWI [T]

  • 2007: $1,092,684
  • 2006: $1,264,790

Kelly, G and Pigram, P. Developing new, water-based lubricants for sheet metal forming, Australian Research Council Linkage APAI [T]

  • 2006: $12,557

Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $115,391
  • 2007: $113,125
  • 2006: $110,880

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Timokhina, I, Dingle, M, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, ARC_Deakin University Australian Postgraduate Award Industry Second Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2008: $69,288
  • 2007: $78,047
  • 2006: $182,166

Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council Fellowship - Discovery - Federation Fellowship [T]

  • 2008: $329,089
  • 2007: $322,625
  • 2006: $316,222

Hodgson, P, Barnett, M, Beynon, J* and Rainforth, W*. The development of optimum microstructures in hot worked metals, Australian Research Council, Project - Discovery - Projects [T]

  • 2006: $85,179

Wang, X, Fraser, W* and Tang, Z. Modelling the stability and efficiency of ring spinning, Australian Research Council Discovery Project [T]

  • 2007: $77,908
  • 2006: $75,907

Davies, C*, Pereloma, E*, Hodgson, P, Lapovok, R* and Estrin, Y*. Microforming: effects of microstructural scale on metal formability, Australian Research Council Discovery Project [T]

  • 2007: $50,000
  • 2006: $50,000

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres, Australian Research Council Linkage Project [T]

  • 2007: $67,007
  • 2006: $63,353

Wang, X, Wang, L and Palmer, S. Predicting the pilling propensity and softness of knitted wool fabrics, Australian Wool Innovation [T]

  • 2006: $137,517

Wang, X and Wang, H. Spunlaced and thermobonded Non-Woven Wool Materials, Australian Wool Innovation [T]

  • 2006: $124,800

Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation Limited Grant - Research [T]

  • 2008: $12,000
  • 2007: $14,000
  • 2006: $28,000

Wang, L and Rajkhowa, R*. AWI ES044: Blending of Eri silk and wool, Australian Wool Innovation [T]

  • 2006: $15,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, Australian Research Council Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]

  • 2008: $110,360
  • 2007: $104,915
  • 2006: $94,417

Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide., Australian Research Council Collaborative - Linkage - Projects (Round 1) [T]

  • 2008: $148,460
  • 2007: $145,549
  • 2006: $142,660

Cookson, P. Engineering Enhancements to Wool Fabrics Through Commercial Atmospheric Plasma Treatments., Australian Wool Innovation Limited [T]

  • 2007: $112,053
  • 2006: $80,000

Muddle, B*, Hodgson, P, Schaffer, G*, Ferry, M*, Ringer, S*, Xia, K*, Nie, J*, Davies, C*, Hutchinson, C*, Barnett, M, Dahle, A*, Caceres, C*, Hoffman, M*, Dunlop, G*, Couper, M*, Embury, J*, Loretto, M*, Humphries, F*, Arnberg, L*, Estrin, Y*, Fraser, H* and Brechet, Y*. Design in Light Metals, Australian Research Council Centre - Centres of Excellence [T]

  • 2008: $609,384
  • 2007: $497,330
  • 2006: $497,330

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]

  • 2008: $72,457
  • 2007: $73,597
  • 2006: $36,696

Hodgson, P. Ductile Bulk Metallic Glass Composites, Australian Research Council - Linkage International [T]

  • 2007: $10,396
  • 2006: $5,000

Halley, P* and Guo, Q. Novel Tough Polymer Composites, Australian Research Council [T]

  • 2007: $57,446
  • 2006: $106,784

Guo, Q. Nanoporous Epoxy Thermosets via Microphase Separation of Block Copolymers, Australian Research Council [T]

  • 2006: $81,151

Kaynak, A. PhD Scholarship - Novel Conducting Polymer Films and Coated Textiles, Australian Wool Innovation Limited Scholarship [T]

  • 2008: $24,181
  • 2007: $5,000
  • 2006: $11,000

Wang, X. FT881 Wool Study Tour 2006, Australian Wool Innovation Limited [T]

  • 2006: $23,970

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology, Department of Innovation, Industry and Regional Development Grant - Centre of Excellence Project [T]

  • 2008: $139,333
  • 2007: $235,000

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]

  • 2008: $119,676
  • 2007: $58,664

Barnett, M, Godet, S*, Yue, S* and Jonas, J*. Mechanisms for Improved Ductility of Magnesium Alloys, Australian Research Council Collaborative - Linkage - International [T]

  • 2008: $15,498
  • 2007: $15,000

Wang, X, Cookson, P, Kikutani, T* and Gao, X*. Advanced polymer fibres with multiple functionalities, Australian Research Council Collaborative - Linkage - International [T]

  • 2008: $8,327
  • 2007: $15,000

Kong, L, She, M and Trengove, R*. Feedwater characterisation, Commonwealth Scientific and Industrial Research Organisation Flagship Collaboration Research Fund [T]

  • 2008: $123,548
  • 2007: $120,237

Wen, C, Yan, W* and Nicholson, G*. Titanium Alloy Scaffolds for Osseointegration Implant Materials, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $84,469
  • 2007: $82,227

Barnett, M and Muddle, B*. Design in Light Metals: Thermohydrogen Processing of titanium., Centres of Excellence, Australian Research Council, Centres of Excellence [T]

  • 2007: $91,461

Mai, Y* and Guo, Q. Nanostructure Design and Toughening of Novel Thermosets, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $89,532

Hodgson, P, Beynon, J*, Strezov, L*, Stanford, N, Dippenaar, R*, Sietsma, J* and Thijsse, B*. Development of new steel products by thin strip casting and direct thermomechanical processing, Australian Research Council Grant - Discovery Projects [T]

  • 2008: $149,000

Lin, T and Wang, X. A New Chlorine-Free Shrink Proofing Technology - A Feasibility Study, Australian Wool Innovation Limited Grant - Research [T]

  • 2008: $47,500

Wang, X. Improving production efficiency, quality and value-adding of rare natural fibres, Rural Industries Research and Development Corporation Grant - Research [T]

  • 2008: $28,000

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]

  • 2008: $47,685

Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI) [T]

  • 2008: $38,250

Research Income - Other Public Sector Funding

Lin, T and Wang, X. Application of Thin Coatings to Textile Substances [U]

  • 2006: $50,000

Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology [U]

  • 2006: $125,667

Wang, L, Lin, T, Cookson, P, Hurren, C and Wang, X. Performance fibres and textiles [U]

  • 2008: $8,000
  • 2007: $72,000

Wang, X, Lin, T and Hurren, C. SEED FUNDING FOR Development of broadband electromagnetic spectral managed textile fabrics [U]

  • 2007: $10,000

Lin, T and Wang, X. Tuneable nanostructured electronic textiles based on conducting polymers and carbon nanotubes [U]

  • 2007: $90,000

Lin, T. GHD Early Researchers Award [U]

  • 2008: $4,545

Tsuzuki, T, Wang, X and Zhang, L. Biomaterials and functional textiles [U]

  • 2008: $50,000

Wang, X. Selective sequestering of heavy metal and actinide ions by biopolymer powders derived from silk biopolymer powder derived from silk fibres [U]

  • 2008: $13,000

Research Income - Industry and Other Funding - Australian

Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]

  • 2008: $25,000
  • 2007: $60,000
  • 2006: $50,000

Wang, X and Wang, L. Controlling and Predicting the Pilling Propensity of Fabrics [V.1]

  • 2006: $397

Barnett, M. New Wrought Magnesium Alloys: Manipulating the Annealed Microstructure [V.1]

  • 2006: $11,775

Wang, X. Reducing the hairiness and improving the quality of wools yarns [V.1]

  • 2006: $32,698

Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]

  • 2008: $25,872
  • 2007: $95,761
  • 2006: $77,880

Wang, X and Wang, L. Scouring and Dehairing Australian Cashmere Fibres [V.1]

  • 2007: $15,000
  • 2006: $20,000

Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers [V.1]

  • 2006: $14,500

Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide. [V.1]

  • 2007: $28,125
  • 2006: $37,500

Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness [V.1]

  • 2008: $10,000
  • 2007: $40,000

Wang, X, Cookson, P, Lin, T and Kaynak, A. Bio-medical and healthcare applications of fibres and textiles [V.1]

  • 2007: $7,500
  • 2006: $67,500

Gao, W and Hodgson, P. Simulation of the Heat Treatment Process Intensified by Solid Particles [V.1]

  • 2006: $10,000

Wang, L and Wang, X. Modelling Airflow for Fibre Transfer and Separation [V.1]

  • 2006: $10,000

Barnett, M and Rolfe, B. A multi-scale model of plasticity for magnesium alloys [V.1]

  • 2006: $5,000

Rolfe, B. Multi-scale modelling of Martensitic Transformation in Steel by enhancing StGermain [V.1]

  • 2006: $18,750

Lin, T and Wang, X. PhD Scholarship - Ian Heritage Scholarship [V.1]

  • 2008: $20,000
  • 2006: $40,000

Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface [V.1]

  • 2008: $50,000

Wang, L, Wang, X and Yan, W. Impact Simulation of Irregular Fibres [V.1]

  • 2007: $10,000

Forrest, M and Wen, C. Lightweight Composite Armour for Personal Protection [V.1]

  • 2007: $319,725

Rolfe, B. Extending the multi-scale capabilities of Xanthus [V.1]

  • 2007: $12,000

Wen, C. Victorian Centre for Advanced Materials Manufacturing (VCAMM round 2/3): Development of Scaffold metal alloys for biomedical applications [V.1]

  • 2008: $76,725
  • 2007: $200,475

Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece [V.1]

  • 2008: $15,000

Hodgson, P and Fabijanic, D. Novel Fluidised Bed Duplex Surface Treatments for Ferrous Materials [V.1]

  • 2008: $61,732

Research Income - Industry and Other Funding - International B (Other Income)

Kong, L. Development of a bio-degradable rubber/polymer base for chewing gum [V.3]

  • 2007: $55,000

Hodgson, P and Dingle, M. Predicting tool life issues of AHSS stampings. [V.3]

  • 2008: $44,881

Research Income - Other Funding Sources

Barnett, M. CAST Metals Manufacturing - A, CRC for CAST Metals Manufacturing [X]

  • 2006: $97,352

Hilditch, T and Hodgson, P. Auto CRC Initial Project 14, Rapid Tooling Development, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $56,910

Barnett, M. Wrought Magnesium Alloys Development, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $200,249
  • 2007: $84,094

Hodgson, P. Light Metals Prototype Structures, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $16,372

Frayman, Y. Melt Handling and Dross Generation, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $36,674
  • 2007: $81,677

Nahavandi, S. Die Casting Productivity, Cooperative Research Centre, Department of Education, Science and Training [X]

  • 2007: $85,585

Hilditch, T and Hodgson, P. Auto CRC - MDO C4-04, Department of Education, Science and Training Cooperative Research Centre [X]

  • 2008: $20,132

Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $162,614

Hodgson, P and Nikhare, C. The development of low cost, complex shapes from advanced high strength steels using low pressure hydroforming, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]

  • 2008: $8,000

Higher Degree by Research Completions

2007 - Doctor of Philosophy

Mark Cartmill. Supervisor: Matthew Barnett
Thesis entitled: Softening during the Hot Deformation of Steel.

Ali Dehghan-Manshadi. Supervisor: Peter Hodgson
Thesis entitled: The Evolution of Recrystallization During and Following Hot Deformation.

Richard Foitzik. Supervisor: Akif Kaynak
Thesis entitled: Novel Conducting Polymer Films and Coated Textiles.

Eva Hakansson. Supervisor: Akif Kaynak
Thesis entitled: Characteristics of Conducting Textiles in the Microwave Frequency Range.

Qing Li. Supervisor: Xungai Wang
Thesis entitled: A Study of Dimensional Changes in Wool Fibres and Fabrics.

Kevin Magniez. Supervisor: Bronwyn Fox
Thesis entitled: "Structure-Property Relationships of Nylon 6, MXD6, their Blends and Nanocomposites".

Kariyawasam Nanayakkara. Supervisor: Peter Hodgson
Thesis entitled: Experimental Analysis of Friction in Forming Automotive Coated Steels.

Ali-Reza Shokouhi. Supervisor: Peter Hodgson
Thesis entitled: The Mechanisms of Dynamic Strain Induced Transformation and Post-Deformation Evolution.

Michael Silcock. Supervisor: Bronwyn Fox
Thesis entitled: Composite Crashworthy Structures: Manufacture and Modelling.

Jin Zhang. Supervisor: Bronwyn Fox
Thesis entitled: Quickstep: A Novel Process for Composite Manufacture.

2007 - Doctor of Technology

Andrzej Krajewski. Supervisor: Xungai Wang
Thesis entitled: Improving Nonwoven Web Quality with a new Web Scanning Device.

2007 - Master of Engineering

Dongye Fei. Supervisor: Peter Hodgson
Thesis entitled: Springback Behaviour of TRIP Steels in Sheet Metal Forming.

Alison Warrior. Supervisor: Bernard Rolfe
Thesis entitled: Structured Methodology for Evaluating Stamping Feasibility of New Part Design.

Legend:
* Not a member of Deakin University at time of output.

DRO to publications collection last synchronised: Thursday 23rd October 2014 10:04pm

Deakin University acknowledges the traditional land owners of present campus sites.

8th November 2010