2008 Centre for Material and Fibre Innovation Research Output
Note: The 2012, 2013 publications have not been audited.
Jump to: Publications | Grants and Consultancies | HDR completions
Publications
Lin, Hungyen*, Kong, Lingxue and Hsu, Hung-Yao* (2008) Data mining for degradation modelling, VDM Verlag Dr. Muller, Saarbrucken, Germany [A1.1]
DRO entry for this publication
Hurren, Christopher (2008) Dyeing and colouring tests for fabrics, in Hu, Jinlian (eds), Fabric testing, pp. 255-274, Taylor & Francis, Boca Raton, Fla. [B1]
Kong, Lingxue, Chen, Ying*, Peng, Zhen and Li, Puwang (2008) Latex-based nanocomposites, in Thomas, Sabu and Zaikov, Gennady E. (eds), Progress in polymer nanocomposite research, pp. 83-104, Nova Science Publishers, Hauppauge, N.Y. [B1]
Rippon, J. A. (2008) Friction, felting and shrink-proofing of wool, in Gupta, B.S. (eds), Friction in textile materials, pp. 253-291, Woodhead Publishing, Cambridge, England [B1]
Wang, X., Liu, X. and Hurren, C. (2008) Physical and mechanical testing of textiles, in Hu, Jinlian (eds), Fabric testing, pp. 90-124, Woodhead Publishing Ltd, London, England [B1]
Asgari, S. A., Hodgson, P. D., Lemiale, V.*, Yang, C. and Rolfe, B. F. (2008) Multiscale particle-in-cell modelling for advanced high strength steels, Advanced materials research, vol. 32, pp. 285-288, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749122306
Citation counts:Scopus - 1
Asgari, S.A., Pereira, M., Rolfe, B.F., Dingle, M. and Hodgson, P.D. (2008) Statistical analysis of finite element modeling in sheet metal forming and springback analysis, Journal of materials processing technology, vol. 203, no. 1-3, pp. 129-136, Elsevier SA, Zürich, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-43849103630
Citation counts:Thomson - 15
Awaja, Firas, van Riessen, Grant*, Kelly, Georgina, Fox, Bronwyn and Pigram, Paul J* (2008) ToF-SIMS investigation of epoxy resin curing reaction at different resin to hardener ratios, Journal of applied polymer science, vol. 110, no. 5, pp. 2711-2717, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-56749103927
Citation counts:Awaja, Firas, Gilbert, M.*, Kelly, Georgina, Fox, Bronwyn, Brynolf, Russell* and Pigram, Paul J.* (2008) Surface properties of polypropylene following a novel industrial surface-treatment process, Surface and interface analysis, vol. 40, no. 11, pp. 1454-1462, John Wiley & Sons, Oxford, England [C1]
ERA journal ID: 1506 – Scopus EID: 2-s2.0-55649111887
Citation counts:Barnett, Matthew, Keshavarz, Zohreh, Beer, Aiden and Ma, Xiang (2008) Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy, Acta materialia, vol. 56, no. 1, pp. 5-15, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-36249029905
Citation counts:Barnett, M. (2008) A rationale for the strong dependence of mechanical twinning on grain size, Scripta Materialia, vol. 59, no. 7, pp. 696-698, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-47749150621
Citation counts:Barnett, M., Jacob, S., Gerard, B.* and Mullins, J. (2008) Necking and failure at low strains in a coarse-grained wrought Mg alloy, Scripta materialia, vol. 59, no. 10, pp. 1035-1038, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-51349154109
Citation counts:Beer, Aiden and Barnett, Matthew (2008) Microstructure evolution in hot worked and Annealed Magnesium Alloy AZ31, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 485, no. 1-2, pp. 318-324, Elsevier SA, Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42149136304
Citation counts:Calka, A.*, Oleszak, D.* and Stanford, N. (2008) Rapid synthesis of TiC–Fe3C composite by electric discharge assisted mechanical milling of ilmenite (FeTiO3) with graphite, Journal of alloys and compounds, vol. 459, no. 1-2, pp. 498-500, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-43549118140
Citation counts:Chen, Xiaobo, Nouri, Alireza, Li, Yuncang, Lin, Jianguo, Hodgson, Peter and Wen, Cui'e (2008) Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid, Biotechnology and bioengineering, vol. 101, no. 2, pp. 378-387, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 3345 – Scopus EID: 2-s2.0-51649120415
Citation counts:Chen, Ying*, Peng, Zheng, Kong, Lingxue, Huang, Maofang* and Li, Puwang (2008) Natural rubber nanocomposite reinforced with nano silica, Polymer engineering and science, vol. 48, no. 9, pp. 1674-1677, John Wiley & Sons, Stamford, Conn. [C1]
ERA journal ID: 1692 – Scopus EID: 2-s2.0-51349130980
Citation counts:Cheng, Tong, Lin, Tong, Brady, Rex and Wang, Xungai (2008) Fast response photochromic textiles from hybrid silica surface coating, Fibers and polymers, vol. 9, no. 3, pp. 301-306, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-47549110943
Citation counts:Cizek, P. and Barnett, M. (2008) Characteristics of the contraction twins formed close to the fracture surface in Mg-3A1-1Zn alloy deformed in tension, Scripta Materialia, vol. 59, no. 9, pp. 959-962, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-49949115100
Citation counts:de Souza, T. and Rolfe, B. (2008) Multivariate modelling of variability in sheet metal forming, Journal of materials processing technology, vol. 203, no. 1-3, pp. 1-12, Elsevier SA, Aedermannsdorf, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-43849109463
Citation counts:Dehghan-Manshadi, Ali*, Jonas, John J.*, Hodgson, Peter and Barnett, Mathew (2008) Correlation between the deformation and post-deformation softening behaviours in hot worked Austenite, ISIJ International, vol. 48, no. 2, pp. 208-211, Iron and Steel Institute of Japan, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-42349090027
Citation counts:Dehghan-Manshadi, A.*, Barnett, M. and Hodgson, P. (2008) Hot deformation and recrystallization of austenitic stainless steel: Part 11. post-deformation recrystallization, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 6, pp. 1371-1381, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-43449092857
Citation counts:Dehghan-Manshadi, A.* and Hodgson, P. D. (2008) Dependency of recrystallization mechanism to the initial grain size, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 12, pp. 2830-2840, Springer New York LLC, New York, N.Y. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-55249089898
Citation counts:Dehghan-Manshadi, A., Barnett, M. and Hodgson, P. (2008) Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 485, no. 1-2, pp. 664-672, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42149162933
Citation counts:Dehghan-Manshadi, A.*, Barnett, M. and Hodgson, P. (2008) Hot deformation and recrystallization of austenitic stainless steel: part 1. dynamic recrystallization, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 6, pp. 1359-1370, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-43149111820
Citation counts:Ding, Jie*, Wang, Hongxia, Lin, Tong and Lee, Bin* (2008) Electroless synthesis of nano-structured gold particles using conducting polymer nanoparticles, Synthetic metals, vol. 158, no. 14, pp. 585-589, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-48949097639
Citation counts:Easton, Mark*, Beer, Aiden, Barnett, Matthew, Davies, Chris*, Dunlop, Gordon*, Durandet, Yvonne*, Blacket, Stuart*, Hilditch, Tim and Beggs, Peter* (2008) Magnesium alloy applications in automotive structures, Journal of metals, vol. 60, no. 11, pp. 57-62, Springer, Warrendale, Pa. [C1]
ERA journal ID: 4030 – Scopus EID: 2-s2.0-56249139705
Citation counts:Fang, Jian, Niu, HaiTao, Lin, Tong and Wang, Xungai (2008) Applications of electrospun nanofibers, Chinese science bulletin, vol. 53, no. 15, pp. 2265-2286, Science in China Press, Beijing, China [C1]
ERA journal ID: 17493 – Scopus EID: 2-s2.0-48749089879
Citation counts:Guo, Qipeng, Liu, Jing, Chen, Ling* and Wang, Ke* (2008) Nanostructures and nanoporosity in thermoset epoxy blends with an amphiphilic polyisoprene-block-poly(4-vinyl pyridine) reactive diblock copolymer, Polymer, vol. 49, no. 7, pp. 1737-1742, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-40849117952
Citation counts:Hameed, Nishar. and Guo, Qipeng (2008) Selective hydrogen bonding and hierarchical nanostructures in poly(hydroxyether of bisphenol A)/poly(ε-caprolactone)-block-poly(2-vinyl pyridine) blends, Polymer, vol. 49, no. 4, pp. 922-933, Elsevier, United Kingdom [C1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-39049086620
Citation counts:Hameed, Nishar and Guo, Qipeng (2008) Nanostructure and hydrogen bonding in interpolyelectrolyte complexes of poly(ε-caprolactone)-block-poly(2-vinyl pyridine) and poly(acrylic acid), Polymer, vol. 49, no. 24, pp. 5268-5275, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 1688 – Scopus EID: 2-s2.0-55049113527
Citation counts:Hameed, Nishar, Liu, Jing and Guo, Qipeng (2008) Self-assembled complexes of poly(4-vinylphenol) and poly(ε-caprolactone)-block-poly(2-vinylpyridine) via competitive hydrogen bonding, Macromolecules, vol. 41, no. 20, pp. 7596-7605, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 1687 – Scopus EID: 2-s2.0-55649117999
Citation counts:Hodgson, Peter D., Shokouhi, Alireza and Beladi, Hossein (2008) A descriptive model for the formation of ultrafine grained steels, ISIJ international, vol. 48, no. 8, pp. 1046-1049, Nippon Tekko Kyokai, Tokyo, Japan [C1]
ERA journal ID: 4722 – Scopus EID: 2-s2.0-55149121188
Citation counts:Hurren, Christopher, Cookson, Peter and Wang, Xungai (2008) The effects of ultrasonic agitation in laundering on the properties of wool fabrics, Ultrasonics sonochemistry, vol. 15, no. 6, pp. 1069-1074, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 34301 – Scopus EID: 2-s2.0-44649195597
Citation counts:Hurren, C J., Liu, R T.*, Liu, Xin and Wang, X G. (2008) Photo-catalysis of red wine stains using titanium dioxide sol-gel coatings on wool fabrics, Advances in science & technology, vol. 60, pp. 111-116, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 123752 – Scopus EID: 2-s2.0-62449302390Kashef, Sadaf, Yan, Wenyi*, Lin, J.ianguo and Hodgson, Peter (2008) Mechanical properties of titanium foam for biomedical applications, International journal of modern physics B, vol. 22, no. 31/32, pp. 6155-6160, World Scientific, Singapore [C1]
ERA journal ID: 987 – Scopus EID: 2-s2.0-62349142047
Citation counts:Kashef, Sadaf, Asgari, Alireza, Hodgson, Peter and Yan, Wenyi* (2008) Simulation of three-point bending test of titanium foam for biomedical applications, Advanced materials research, vol. 32, pp. 237-240, Trans Tech, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749124809
Citation counts:Kaynak, Akif and Hakansson, Eva (2008) Short-term heating tests on doped polypyrrole-coated polyester fabrics, Synthetic metals, vol. 158, no. 8-9, pp. 350-354, Elsevier S.A., Basel, Switzerland [C1]
ERA journal ID: 1155 – Scopus EID: 2-s2.0-46549084915
Citation counts:Kong, L.X., She, F.H., Gao, W.M., Nahavandi, S. and Hodgson, P.D. (2008) Integrated optimization system for high pressure die casting processes, Journal of materials processing technology, vol. 201, no. 1-3, pp. 629-634, Elsevier SA, Zürich, Switzerland [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-41549168250
Citation counts:Kubota, Masahiro*, Cizek, P. and Rainforth, W. M.* (2008) Properties of mechanically milled and spark plasma sintered Al–15 at.% MgB2 composite materials, Composites science and technology, vol. 68, no. 3-4, pp. 888-895, Pergamon, Oxford, England [C1]
ERA journal ID: 4884 – Scopus EID: 2-s2.0-38649118895
Citation counts:Li, Q., Brady, P. R. and Wang, X. G. (2008) The effect of fabric strain during pressure steaming on fabric dimensional properties, Journal of the Textile Institute, vol. 99, no. 6, pp. 591-596, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-56449123075Li, Q., Brady, P. R., Hurren, C. J. and Wang, X. G. (2008) The dimensional and mechanical properties of wool/polyester fabrics made from vortex and ring-spun yarns, Journal of the Textile Institute, vol. 99, no. 6, pp. 561-568, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-56449120128
Citation counts:Lin, Tong, Cheng, Tong, Brady, Rex and Wang, Xun Gai (2008) Photochromic wool fabrics with enhanced durability and photochromic performance, Advances in science and technology, vol. 60, pp. 21-25, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 123752 – Scopus EID: 2-s2.0-62549138806Liu, Xin, Lin, Tong, Fang, J., Yao, Gang* and Wang, X G. (2008) Electrospun nanofibre membranes as wound dressing materials, Advances in science & technology, vol. 57, pp. 125-130, Trans Tech Publications, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 123752 – Scopus EID: 2-s2.0-62449309167Ma, Xiang and Barnett, Matthew (2008) Influences of steady and cyclic die rotation on the compression of aluminium, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 483-484, pp. 444-447, Elsevier SA, Amsterdam, Netherlands [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-41849096027
Citation counts:Muransky, O.*, Carr, D.*, Barnett, M., Oliver, E.* and Sittner, P.* (2008) Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: in situ neutron diffraction and EPSC modelling, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 496, no. 1-2, pp. 14-24, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-51949101437
Citation counts:Naebe, Minoo, Lin, Tong, Staiger, Mark P.*, Dai, Liming* and Wang, Xungai (2008) Electrospun single-walled carbon nanotube/polyvinyl alcohol composite nanofibers : structure-property relationships, Nanotechnology, vol. 19, no. 30, pp. 1-8, Institute of Physics, London, England [C1]
ERA journal ID: 5163 – Scopus EID: 2-s2.0-47249090384
Citation counts:Nouri, Alireza, Chen, Xiaobo, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter D. and Wen, Cui'e (2008) Synthesis of Ti–Sn–Nb alloy by powder metallurgy, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 485, no. 1-2, pp. 562-570, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42149141831
Citation counts:Oudin, A., Hodgson, P.D. and Barnett, M.R. (2008) EBSD analysis of a Ti-IF steel subjected to hot torsion in the ferritic region, Materials science and engineering. A. Structural materials : properties, microstructures and processing, vol. 486, no. 1, pp. 72-79, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42949178650
Citation counts:Peng, Qiang*, Park, Kuyson*, Lin, Tong, Durstock, Michael* and Dai, Liming* (2008) Donor-п-acceptor conjugated copolymers for photovoltaic applications : tuning the open-circuit voltage by adjusting the donor/acceptor ratio, Journal of physical chemistry B : condensed matter, materials, surfaces, interfaces and biophysical, vol. 112, no. 10, pp. 2801-2808, American Chemical Society, Washington, D.C. [C1]
ERA journal ID: 1467 – Scopus EID: 2-s2.0-42449125754
Citation counts:Pereira, Michael P., Yan, Wenyi* and Rolfe, Bernard F. (2008) Contact pressure evolution and its relation to wear in sheet metal forming, Wear, vol. 265, no. 11-12, pp. 1687-1699, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3724 – Scopus EID: 2-s2.0-54149109135
Citation counts:Rafiee, Reza, Rolfe, Bernard F. and Yan, Wenyi* (2008) Simulation of contact pressure in sheet metal trimming/blanking process, Advanced materials research, vol. 41-42, pp. 463-468, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-56349157450Rajkhowa, Rangam, Wang, Lijing and Wang, Xungai (2008) Ultra-fine silk powder preparation through rotary and ball milling, Powder technology, vol. 185, no. 1, pp. 87-95, Elsevier, Lausanne, Switzerland [C1]
ERA journal ID: 3918 – Scopus EID: 2-s2.0-43449105018
Citation counts:Robertson, L.T, Hilditch, T.B and Hodgson, P.D (2008) The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel, International journal of fatigue, vol. 30, no. 4, pp. 587-594, Elsevier Ltd, Oxford, England [C1]
ERA journal ID: 3676 – Scopus EID: 2-s2.0-38149058125
Citation counts:Sabirov, I., Estrin, Y.*, Barnett, M., Timokhina, I.* and Hodgson, P. (2008) Enhanced tensile ductility of an ultra-fine-grained aluminium alloy, Scripta Materialia, vol. 58, no. 3, pp. 163-166, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-36049034351
Citation counts:Sabirov, Ilchat, Estrin, Yuri*, Barnett, Matthew R., Timokhina, Ilana B.* and Hodgson, Peter (2008) Deformation behaviour of an ultra-fine grained Al6082 alloy, Materials science forum, vol. 584 - 586, pp. 703-707, Trans Tech Publications Ltd., Aedermannsdorf, Switzerland [C1]
ERA journal ID: Not matching ERA journal listSabirov, I., Estrin, Y.*, Barnett, M., Timokhina, I.* and Hodgson, P. (2008) Tensile deformation of a ultrafine-grained aluminium alloy: micro shear banding and grain boundary sliding, Acta Materialia, vol. 56, no. 10, pp. 2223-2230, Pergamon, Oxford, England [C1]
ERA journal ID: 4742 – Scopus EID: 2-s2.0-43449108255
Citation counts:Safi-Naqvi, S.H.*, Hutchinson, W.B.* and Barnett, M.R. (2008) Texture and mechanical anisotropy in three extruded magnesium alloys, Materials science and technology, vol. 24, no. 10, pp. 1283-1292, Maney, London, England [C1]
ERA journal ID: Not matching ERA journal list
Citation counts:She, F.H., Gao, W. M, Peng, Z.*, Hodgson, P. D and Kong, L. X (2008) Micro- and nano-characterization of membrane materials, Journal of the Chinese Institute of Chemical Engineers, vol. 39, no. 4, pp. 313-320, Chinese Institute of Chemical Engineers, Taiwan, Republic of China [C1]
ERA journal ID: 3908 – Scopus EID: 2-s2.0-48849088544
Citation counts:Srinivas Rao, V.*, Kashyap, B.P.*, Prabhu, N.* and Hodgson, P.D. (2008) T-Shaped equi-channel angular pressing of Pb-Sn eutectic and its tensile properties, Materials science and engineering. A. Structural materials : properties, microstructures and processing, vol. 486, no. 1, pp. 341-349, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-42949138047
Citation counts:Stanford, N., Dunne, D P.* and Li, H.* (2008) Re-examination of the effect of NbC precipitation on shape memory in Fe-Mn-Si-based alloys, Scripta materialia, vol. 58, no. 7, pp. 583-586, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-38749097731
Citation counts:Stanford, Nicole, Atwell, Dale, Beer, Aiden, Davies, C.* and Barnett, Matthew (2008) Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys, Scripta materialia, vol. 59, no. 7, pp. 772-775, Pergamon, Tarrytown, N.Y. [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-47749116833
Citation counts:Stanford, N., Huang, S.* and Dunne, D.* (2008) Characterisation of Ni–Ti thin films produced by filtered arc deposition, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 473, no. 1-2, pp. 172-179, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-37449025646
Citation counts:Stanford, Nicole and Barnett, Matthew (2008) Effect of composition on the texture and deformation behaviour of wrought Mg alloys, Scripta materialia, vol. 58, no. 3, pp. 179-182, Pergamon, Oxford, England [C1]
ERA journal ID: 4837 – Scopus EID: 2-s2.0-36049010735
Citation counts:Stanford, N. and Barnett, M. (2008) The origin of "Rare Earth" texture development in extruded Mg-based alloys and its effect on tensile ductility, Materials science and engineering A: structural materials: properties, microstructures and processing, vol. 496, no. 1-2, pp. 399-408, Elsevier SA, Lausanne, Switzerland [C1]
ERA journal ID: 4973 – Scopus EID: 2-s2.0-51749119225
Citation counts:Stanford, N. (2008) Observation of {1121}twinning in a Mg-based alloy, Philosophical magazine letters, vol. 88, no. 5, pp. 379-386, Taylor & Francis Ltd, London, U.K. [C1]
ERA journal ID: 1123 – Scopus EID: 2-s2.0-45849145430
Citation counts:Stanford, N., Carlson, U. and Barnett, M. (2008) Deformation twinning and the hall-petch relation in commercial purity ti, Metallurgical and materials transactions A - physical metallurgy and materials science, vol. 39, no. 4, pp. 933-944, Springer Boston, Boston, Mass. [C1]
ERA journal ID: 4729 – Scopus EID: 2-s2.0-40549130050
Citation counts:Stanford, Nicole and Barnett, Matthew (2008) Fine grained AZ31 produced by conventional thermo-mechanical processing, Journal of alloys and compounds, vol. 466, no. 1-2, pp. 182-188, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-50649116353
Citation counts:Sun, Lu, Rippon, John A., Cookson, Peter G., Wang, Xungai, King, Ken*, Koulaeva, Olga* and Beltrame, Reno* (2008) Nano zinc oxide for UV protection of textiles, International journal of technology transfer & commercialisation, vol. 7, no. 2/3, pp. 224-235, Inderscience Publishers, Milton Keynes, Buckinghamshire, U.K. [C1]
ERA journal ID: 31154 – Scopus EID: Not taggedTang, Zheng-Xue, Fraser, W. Barrie*, Wang, Lijing and Wang, Xungai (2008) Examining the effects of balloon control ring on ring spinning, Fibers and polymers, vol. 9, no. 5, pp. 625-632, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-77957667619
Citation counts:Wang, Hongxia., Fang, Jian, Cheng, Tong, Ding, Jie*, Qu, Liangti.*, Dai, Liming*, Wang, Xungai and Lin, Tong (2008) One-step coating of fluoro-containing silica nanoparticles for universal generation of surface superhydrophobicity, Chemical communications, no. 7, pp. 877-879, Royal Society of Chemistry, London, England [C1]
ERA journal ID: 1319 – Scopus EID: 2-s2.0-38849183488
Citation counts:Wang, Jiangting, Hodgson, Peter, Zhang, Jingde* and Yang, Chunhui (2008) Residual thermal stresses in a Fe3Al/Al2O3 gradient coating system, Advanced Materials Research, vol. 32, pp. 71-74, Trans Tech Publications Ltd, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749093358Wang, Lijing, Singh, Avtar and Wang, Xungai (2008) Dehairing Australian alpaca fibres with a cashmere dehairing machine, Journal of the Textile Institute, vol. 99, no. 6, pp. 539-544, Taylor & Francis, Manchester, England [C1]
ERA journal ID: 36381 – Scopus EID: 2-s2.0-56449121231
Citation counts:Wang, Lijing, Singh, Avtar and Wang, Xungai (2008) A study on dehairing Australian greasy cashmere, Fibers and polymers, vol. 9, no. 4, pp. 509-514, Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-52949110970
Citation counts:Wang, X., Li, Y., Lin, J., Hodgson, P. and Wen, C. (2008) Apatite-inducing ability of titanium oxide layer on titanium surface : the effect of surface energy, Journal of materials research, vol. 23, no. 6, pp. 1682-1688, Materials Research Society, Warrendale, Pa. [C1]
ERA journal ID: 4929 – Scopus EID: 2-s2.0-48949117348
Citation counts:Wang, X. J., Li, Y. C., Lin, J. G., Yamada, Y.*, Hodgson, P. D. and Wen, C. E. (2008) In vitro bioactivity evaluation of titanium and niobium metals with different surface morphologies, Acta biomaterialia, vol. 4, no. 5, pp. 1530-1535, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-48449106921
Citation counts:Wang, Xiaojian, Li, Yuncang, Lin, Jianguo, Hodgson, Peter D. and Wen, Cui'e (2008) Effect of heat-treatment atmosphere on the bond strength of apatite layer on Ti substrate, Dental materials, vol. 24, no. 11, pp. 1549-1555, Elsevier Inc, Maryland Heights, Mo. [C1]
ERA journal ID: 5041 – Scopus EID: 2-s2.0-52049084578
Citation counts:Wang, Xin*, Xu, Weilan*, Cui, Weigang*, Li, Wenbin* and Wang, Xungai (2008) Bleaching and dyeing of superfine wool powder/polypropylene blend film, Research journal of textile and apparel, vol. 12, no. 4, pp. 12-20, Hong Kong Polytechnic University, Hong Kong [C1]
ERA journal ID: 3546 – Scopus EID: Not taggedWang, Xin, Xu, Weilin* and Wang, Xungai (2008) Characterization of hot-pressed films from superfine wool powder, Journal of applied polymer science, vol. 108, no. 5, pp. 2852-2856, John Wiley & Sons Inc, Malden, Mass. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-43249099401
Citation counts:Xie, Haowen, Lin, Jianguo, Li, Yuncang, Yan, Wenyi, Hodgson, Peter and Wen, Cui'e (2008) Plastic deformation in Zr41 Ti14 Cu12.5 Ni10 Be22.5 bulk metal glass under vickers indenter, Journal of alloys and compounds, vol. 461, no. 1-2, pp. 173-177, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-44649166315
Citation counts:Xiong, Jianyu, Li, Yuncang, Wang, Xiaojian, Hodgson, Peter and Wen, Cui'e (2008) Mechanical properties and bioactive surface modification via alkali-heat treatment of a porous ti-18Nb-4Sn alloy for biomedical applications, Acta biomaterialia, vol. 4, no. 6, pp. 1963-1968, Elsevier B.V., Amsterdam, The Netherlands [C1]
ERA journal ID: 3385 – Scopus EID: 2-s2.0-53649089896
Citation counts:Xiong, J.Y., Li, Y.C., Wang, X.J., Hodgson, P.D. and Wen, C.E. (2008) Titanium–nickel shape memory alloy foams for bone tissue engineering, Journal of the mechanical behavior of biomedical materials, vol. 1, no. 3, pp. 269-273, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 44865 – Scopus EID: 2-s2.0-44849125403
Citation counts:Xiong, Jianyu, Li, Yuncang, Hodgson, Peter D. and Wen, Cui'e (2008) Influence of porosity on shape memory behavior of porous TiNi shape memory alloy, Functional materials letters (FML), vol. 1, no. 3, pp. 215-219, World Scientific Publishing Co, Singapore [C1]
ERA journal ID: 122926 – Scopus EID: 2-s2.0-77954751379
Citation counts:Xu, Weilin*, Zhou, Fei*, Ouyang, Chenxi*, Cui, Weigang*, Yao, Mu* and Wang, Xungai (2008) Small diameter Polyurethane vascular graft reinforced by elastic weft-knitted tubular fabric of polyester / spandex, Fibers and polymers, vol. 9, no. 1, pp. 71-75, The Korean Fiber Society, Seoul, Korea [C1]
ERA journal ID: 1342 – Scopus EID: 2-s2.0-41149113040
Citation counts:Yan, Wenyi*, Sun, Qingping* and Hodgson, Peter D. (2008) Determination of plastic yield stress from spherical indentation slope curve, Materials letters, vol. 62, no. 15, pp. 2260-2262, Elsevier BV, Amsterdam, The Netherlands [C1]
ERA journal ID: 1005 – Scopus EID: 2-s2.0-41549157389
Citation counts:Yang, Chunhui, Hodgson, Peter Damian, Liu, Qianchu* and Ye, Lin* (2008) Geometrical effects on residual stresses in 7050-T7451 aluminum alloy rods subject to laser shock peening, Journal of materials processing technology, vol. 201, no. 1-3, pp. 303-309, Elsevier, Amsterdam, The Netherlands [C1]
ERA journal ID: 3689 – Scopus EID: 2-s2.0-41549086562
Citation counts:Yang, Chunhui, Sabirov, Ilchat, Mullins, Jonathan and Hodgson, Peter (2008) Analytic prediction of structural stress-strain relations of microstructured metal, Advanced materials research, vol. 32, pp. 83-86, Trans Tech Publications Ltd, Stafa-Zurich, Switzerland [C1]
ERA journal ID: 40869 – Scopus EID: 2-s2.0-45749114142
Citation counts:Yazdipour, N., Davies, C.H.J.* and Hodgson, P.D. (2008) Microstructural modeling of dynamic recrystallization using irregular cellular automata, Computational materials science, vol. 44, no. 2, pp. 566-576, Elsevier BV, Amsterdam, Netherlands [C1]
ERA journal ID: 4885 – Scopus EID: 2-s2.0-55649101459
Citation counts:Zhang, Hu, Cookson, Peter and Wang, Xungai (2008) A comparative study on accelerated weathering tests of wool fabrics, Textile research journal, vol. 78, no. 11, pp. 1004-1010, Sage Science Press (UK), London, England [C1]
ERA journal ID: 3629 – Scopus EID: 2-s2.0-55349112518
Citation counts:Zhang, Hu, Millington, Keith R.* and Wang, Xungai (2008) A morphology-related study on photodegradation of protein fibres, Journal of photochemistry and photobiology. B, Biology, vol. 92, no. 3, pp. 135-143, Elsevier B.V., Amsterdam, Netherlands [C1]
ERA journal ID: 2243 – Scopus EID: 2-s2.0-50549085545
Citation counts:Zhang, Jin and Fox, Bronwyn (2008) 固化条件对热塑增韧环氧树脂的固化动力学和相分离的影响, Cailiao Gongcheng / Journal of materials engineering, pp. 30-34, Cailian Yanjiuyuan, Beijing, China [C1]
ERA journal ID: Not matching ERA journal listZhang, Jin, Fox, Bronwyn and Guo, Qipeng (2008) Consistent model predictions for isothermal cure kinetics investigation of high performance epoxy prepregs, Journal of applied polymer science, vol. 107, no. 4, pp. 2231-2237, John Wiley & Sons, Malden, Mass. [C1]
ERA journal ID: 1671 – Scopus EID: 2-s2.0-38849186125
Citation counts:Zheng, Jinhuan*, Liu, Xin and Brady, P Rex (2008) One-bath union dyeing of wool/polytrimethylene terephthalate blends, Coloration technology, vol. 124, no. 4, pp. 204-210, Wiley-Blackwell Publishing Ltd, Oxford, England [C1]
ERA journal ID: 36513 – Scopus EID: 2-s2.0-57249089430
Citation counts:Zhu, Defeng*, He, Qingguo*, Cao, Huimin*, Cheng, Jiangong*, Feng, Songlin*, Xu, Yuansen* and Lin, Tong (2008) Poly(phenylene ethynylene)-coated aligned ZnO nanorod arrays for 2,4,6-trinitrotoluene detection, Applied physics letters, vol. 93, no. 26, pp. 1-3, American Institute of Physics, N.Y., N.Y. [C1]
ERA journal ID: 949 – Scopus EID: 2-s2.0-58149267519
Citation counts:Calka, A.*, Mosbah, A.*, Stanford, N. and Balaz, P.* (2008) Rapid synthesis of Bi and Sb sulfides using electric discharge assisted mechanical milling, Journal of alloys and compounds, vol. 455, no. 1-2, pp. 285-288, Elsevier BV, Amsterdam, The Netherlands [C1.1]
ERA journal ID: 1448 – Scopus EID: 2-s2.0-41049105300
Citation counts:Dodd, Aaron*, McKinley, Allan*, Tsuzuki, Takuya and Saunders, Martin* (2008) A comparative evaluation of the photocatalytic and optical properties of nanoparticulate ZnO synthesised by mechanochemical processing, Journal of nanoparticle research, vol. 10, no. Supp 1, pp. 243-248, Springer, Dordrecht , The Netherlands [C1.1]
ERA journal ID: 4935 – Scopus EID: 2-s2.0-54249106292
Citation counts:Rolfe, B. F., Asgari, S. A. and Hodgson, P. D. (2008) The forming of advanced high strength steels for the automotive industry, Steel Research International, vol. Special issue; 1, pp. 9-18, Verlag Stahleisen., Düsseldorf, Germany [C1.1]
ERA journal ID: 44873 – Scopus EID: Not taggedSabirov, I., Timokhina, I., Barnett, M.R. and Hodgson, P.D. (2008) Microstructure and mechanical properties of ultra-fine grained Al alloys processed by cryorolling, Steel research international, vol. 79, pp. 190-195, Wiley - V C H Verlag, Weinheim, Germany [C1.1]
ERA journal ID: 44873 – Scopus EID: Not taggedStupka, Nicole, Schertzer, Jonathon D., Bassel-Duby, Rhonda*, Olson, Eric N.* and Lynch, Gordon S. (2008) Stimulation of calcineurin Aα activity attenuates muscle pathophysiology in mdx dystrophic mice, American journal of physiology : regulatory, integrative and comparative physiology, vol. 294, no. 3, pp. R983-R992, American Physiological Society, Bethesda, Md. [C1.1]
ERA journal ID: 3151 – Scopus EID: 2-s2.0-40449139951
Citation counts:Tsuzuki, Takuya (2008) Abnormal transmittance of refractive-index-modified ZnO/organic hybrid films, Macromolecular materials and engineering, vol. 293, no. 2, pp. 109-113, Wiley-VCH Verlag, Weinheim, Germany [C1.1]
ERA journal ID: 1682 – Scopus EID: 2-s2.0-42449129319
Citation counts:Yamada, Yasuo*, Banno, Takumi*, Li, Yuncang and Wen, Cui'e (2008) Anisotropic mechanical properties of nickel foams fabricated by powder metallurgy, Materials science forum, vol. 569, pp. 277-280, Trans Tech Publications, Aedermannsdorf, Switzerland [C1.1]
ERA journal ID: Not matching ERA journal listCheng, Tong, Lin, Tong and Brady, Rex (2008) New color-changeable dyes and their use in textiles, ATA journal for Asia on textile & apparel, vol. 19, no. 1, pp. 1-4, Adsale Publishing Company, Hong Kong [CN]
ERA journal ID: Not matching ERA journal listDharmalingam, Sugumar* and Kong, Lingxue (2008) Lab-on-chip devices for biodefense applications, in Li, Dongqing (eds), Encyclopedia of microfluidics and nanofluidics, pp. 907-910, Springer, New York, N. Y. [D2]
Dharmalingam, Sugumar* and Kong, Lingxue (2008) Chemical vapor deposition for film deposition, in Li, Dongqing (eds), Encyclopedia of microfluidics and nanofluidics, pp. 255-260, Springer, New York, N. Y. [D2]
Asgari, S. Alireza, Yang, Chunhui, Hodgson, Peter D. and Rolfe, Bernard F. (2008) Multiphase material modelling by multiscale particle-in-cell method, in El-Azab, Anter (eds), MMM 2008 : Proceedings of the 4th International Conference on Multiscale Materials Modeling, pp. 547-550, Department of Scientific Computing, Tallahassee, Fla. [E1]
Barnett, M. R. and Cizek, P. (2008) Identification and rationalization of secondary twin variants in a magnesium alloy, in Rollett, A.D Tony; Adams,Brent; Barmak, Katayun and Bieler, Thomas (eds), ICOTOM 2008 : Proceedings of the 15th International Conference on Textures of Materials (ICOTOM 15), pp. 1-10, Wiley, Hoboken, N.J. [E1]
Barnett, M. R., Arhatari, B.*, Stanford, N., Beer, A. G., Keshavarz, Z. and Ma, X. (2008) Some issues relating to the ductility of wrought magnesium alloys, in Pekguleryuz, Mihriban O.; Neelameggham, Neale R.; Beals, Randy S. and Nyberg, Eric A (eds), TMS 2008: Linking Science and Technology for Global Solutions : TMS 2008 Annual Meeting and Exhibition, pp. 85-88, Minerals, Metals and Materials Society, Warrendale, Pa. [E1]
Beladi, H., Hodgson, P. D. and Adachi, Y.* (2008) Formation of ultrafine ferrite by dynamic strain-induced transformation, in Unknown (ed.), MS & T 2008 : Materials Science & Technology Conference and Exhibition : October 5-9, 2008, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania : conference proceedings, pp. 1756-1763, Materials Science & Technology Conference, Warrendale, Pa. [E1]
Chen, X. B., Li, Y. C., Lin, J. G., Hodgson, P. D. and Wen, C. E. (2008) Biomimetic processing of nanocrystallite bioactive apatite coating on titanium-zirconium alloy, in Fan, Jinghong and Chen, Haibo (eds), ICHMM 2008 : Advances in heterogeneous material mechanics, 2008 : proceedings of the second International Conference on Heterogeneous Material Mechanics, June 3-8, 2008, Huangshan, China, pp. 620-623, DEStech Publications, Lancaster, Pa [E1]
de Souza, T. and Rolfe, B. F. (2008) Accuracy and precision assesment of stochastic simulation tools for springback variation, in Hora, Pavel (eds), NUMISHEET 2008 : Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 539-544, ETH Eidgenössische Technische Hochschule, Zurich, Switzerland [E1]
Ghaderi, A., Sabirov, I. and Barnett, M. R. (2008) Effect of grain size on deformation twinning behaviour of high MN steel, in Wanjara, P. and Elwazri, A.M. (eds), Recent Developments in Advanced High Strength Steels Processing: Proceedings of the 47th Conference of Metallurgists (COM2008), pp. 71-81, Canadian Institute of Mining, Metallurgical and Petroleum, Montréal, Canada [E1]
Li, P. W., Lu, M. Z.*, Huang, M. F.*, Peng, Z.* and Kong, L. X. (2008) Thermal degradation of natural rubber/ZNO nanocomposites, in Wang, C. Y.; Li, X. P. and Wang, J. (eds), APCMP 2008 : Proceedings of the 8th Asia-Pacific conference on materials processing, pp. 996-1001, Frontiers of Design and Manufacturing, Riverwood, N.S.W. [E1]
Madej, L.*, Pietrzyk, M.* and Hodgson, P. D. (2008) Application of the strain localization CAFE model to investigate extrusion with various die shapes, in Unknown (ed.), MS & T 2008 : Materials Science & Technology Conference and Exhibition : October 5-9, 2008, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania : conference proceedings, pp. 867-876, Materials Science & Technology Conference, Westerville, Ohio. [E1]
Nicholas, Kevin R, Kumar, Amit, Strahm, Yvan*, Powell, David*, Seemann, Torsten*, Daly, Kerry A.*, Brennan, Amelia*, Menzies, Karensa*, Sharp, Julie, Digby, Matthew* and Lefèvre, Christophe (2008) MammoSapiens: eResearch of the lactation program., in Wyborn, Lesley and McMillan, Patricia (eds), Proceedings of eResearch Australasia 2008, pp. 1-13, Australian Department of Innovation, Industry, Science and Research, Australia [E1]
Nikhare, C. and Hodgson, P. D. (2008) Numerical investigation of ramp and constant pressurization system during tube crushing process, in Raj, Baldev (eds), ICAMT 2008 : Proceedings of International Conference on Advances in Manufacturing Technology, pp. 1-8, Indian National Academy of Engineering (INAE), Chennai, India [E1]
Nikhare, C., Weiss, M. and Hodgson, P. D. (2008) Numerical investigation of high and low pressure tube hydroforming, in Hora, Pavel (eds), NUMISHEET 2008 : Proceedings of the 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, pp. 691-696, Institute of Virtual Manufacturing, Zurich, Switzerland [E1]
Nikhare, Chetan P., Weiss, Matthias and Hodgson, Peter D. (2008) Experimental and numerical investigation of low pressure tube hydroforming on 409 stainless steel, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal Forming 2008 : Proceedings of the 12th International Conference on Metal Forming, pp. 272-279, Verlag Stahleisen GmbH, Duesseldorf, Germany [E1]
Nikhare, C., Marcondes, P. V.*, Weiss, M. and Hodgson, P. D. (2008) Experimental and numerical evaluation of forming and fracture behaviour of high strength steel, in Perez, Teresa (eds), TMS 2008 : New Developments on Metallurgy and Applications of High Strength Steels: Steel Conference, pp. 1-13, TMS, Buenos Aires, Argentina [E1]
Nouri, Alireza, Li, Yuncang, Yamada, Yasuo*, Hodgson, Peter D. and Wen, Cui'e (2008) Effects of process control agent on the microstructure and mechanical properties of Ti-Sn-Nb alloy prepared by mechanical alloying, in Lawcock, Roger; Lawley, Alan and McGeehan, Partick J. (eds), PM 2008 : Advances in powder metallurgy & particulate materials : Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials, pp. 222-233, Metal Powder Industries Federation, Princeton, N.J. [E1]
Nouri, A., Chen, X., Hodgson, P. D., Long, J. M., Yamada, Y.* and Wen, C. (2008) Preparation of bioactive porous Ti-Sn-Nb alloy for biomedical applications, in Lefebvre, Louis Philippe; Banhart, John and Dunand, David C. (eds), MetFoam 2007 : International Conference on Porous Metals and Metallic Foams, pp. 307-310, DEStech Publications, Lancaster, Pa. [E1]
Pereira, M. P., Yan, W.* and Rolfe, B. F. (2008) Contact pressure prediction in sheet metal forming using finite element analysis, in Asnafi, Nader (eds), IDDRG 2008 : Proceedings of the IDDRG 2008 Conference : Best in class stamping, 16-18 June 2008, Olofström, Sweden, pp. 361-371, Industriellt utvecklingscentrum i Olofström AB, Olofström, Sweden [E1]
Rolfe, Bernard, Nahavandi, Saeid and Hodgson, Peter (2008) Recent developments in automotive manufacturing using advanced high strength steels, in Raj, Baldev (eds), ICAMT 2008 : Proceedings of International Conference on Advances in Manufacturing Technology, pp. 1-16, Indian National Academy of Engineering (INAE), Chennai, India [E1]
Tsuzuki, Takuya (2008) Abnormally high optical transmittance of refractive-index modified ZnO / organic hybrid films, in Unknown (ed.), COMMAD 2008 : Proceedings of the 2008 Conference on Optoelectronic and Microelectronic Materials and Devices : 28 July - 1 August 2008, Sydney, Australia, pp. 205-208, ARCNN, Canberra, A.C.T. [E1]
Xiong, J. Y., Li, Y. C., Hodgson, P. D. and Wen, C. E. (2008) Mechanical properties of porous Ti-26NB alloy for regenerative medicine, in Fan, Jinghong and Chen, Haibo (eds), ICHMM 2008 : Advances in heterogeneous material mechanics, 2008 : proceedings of the second International Conference on Heterogeneous Material Mechanics, June 3-8, 2008, Huangshan, China, pp. 630-634, DEStech Publications, Lancaster, Pa. [E1]
Yamada, Y.*, Li, Y. C., Xiong, J. Y., Banno, T.*, Hodgson, P. D. and Wen, C.E. (2008) Processing and mechanical properties of porous Ti-Mo alloy for biomedical applications, in Unknown (ed.), EURO PM 2008 : Proceedings of the International Powder Metallurgy Congress & Exhibition, pp. 201-205, European Powder Metallurgy Association, Shrewsbury, England [E1]
Yamada, Y.*, Banna, T.*, Li, Y. and Wen, C. (2008) Effects of pore morphology on the compressive behaviour of porous metals, in Lefebvre, Louis Philippe; Banhart, John and Dunand, David C. (eds), MetFoam 2007 : International Conference on Porous Metals and Metallic Foams, pp. 415-418, DEStech Publications, Lancaster, Pa. [E1]
Yap, Poh-Hean, Ong, Kok-Leong and Wang, Xungai (2008) Business 2.0 : a novel model for delivery of business services, in Lee, Vincent C. S.; Chen, Jian; Ng, Wee-Keong; Ong, Kok-Leong and Tan, Ting Yean (eds), ICSSSM 2008 : Exploring service dynamics with science and innovative technology : Proceedings of the 2008 International Conference on Service Systems and Service Management, pp. 661-665, IEEE, Piscataway, N.J. [E1]
Yazdipour, N., Hodgson, Peter, Madej, Lukasz* and Rauch, L.* (2008) Numerical simulation of the static recrystalization at micro shear bands, in Unknown (ed.), MS & T 2008 : Materials Science & Technology Conference and Exhibition : October 5-9, 2008, David L. Lawrence Convention Center, Pittsburgh, Pennsylvania : conference proceedings, pp. 832-843, Materials Science & Technology Conference, Warrendale, Pa. [E1]
Asgari, S. A., Hodgson, P. D. and Rolfe, B. F. (2008) Multiscale particle-in-cell for advanced high strength steels, in Bell, John (eds), FMST 2008 : Frontiers in materials science and technology, Trans Tech Publications, Stafa-Zurich, Switzerland [E1.1]
Kong, L. X. and Hodgson, P. D. (2008) Collaborative research training : a global challenge, in Unknown (ed.), ICPE-3 2008 : Proceedings of the 3rd International Conference On Postgraduate Education 2008, ICPE, Penang, Malaysia [E1.1]
Martin, Sheree D., Collier, Fiona M. and Stupka, Nicole (2008) Physiological (5%) oxygen levels enhance proliferation but not differentiation of human primary skeletal muscle precursor cells in vitro, in Unknown (ed.), Proceedings of the Australian Health and Medical Research Congress 2008, Australian Health and Medical Research Congress, Brisbane, Qld. [E1.1]
Stupka, N., Martin, S. D., McKenzie, J. M., Collier, F. M.* and Konstantopoulos, N. (2008) Glucose and insulin modulate the expression and activity of the thioredoxin antioxidant system in cultured human skeletal muscle fibres, in Unknown (ed.), AUPS 2008 : Proceedings of the Australian Physiological Society 2008, p. 1, Australian Physiological Society, Melbourne, Vic. [E1.1]
Stupka, Nicole, Conlan, Xavier A., Martin, Sheree D. and Collier, Fiona M. (2008) Effects of oxygen concentration on the cellular redox state and glutathione content of skeletal muscle cells in culture, in Unknown (ed.), Proceedings of the Australian Health and Medical Research Congress 2008, Australian Health and Medical Research Congress, Brisbane, Qld. [E1.1]
Beladi, Hossein, Adachi, Yoshitaka*, Timokhina, Ilana and Hodgson, Peter (2008) Crystallographic analysis of nano-structured bainitic steels, TMP 2008 : Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, pp. 1-6, Associazione Italiana Di Metallurgia, Padua, Italy [E2]
Cheng, Tong, Lin, Tong, Brady, Rex and Wang, Xungai (2008) Photochromic coloration of wool fabric, Proceedings of the International Conference on Advanced Textile Materials & Manufacturing Technology, pp. 197-202, Zhejiang University Press, Hangzhou, China [E2]
Hilditch, Timothy B., Timokhina, Ilana B., Robertson, Leigh T., Pereloma, Elena V.* and Hodgson, Peter D. (2008) Microstructural analysis of pre-strained TRIP steel after fatigue testing, International Conference on New Developments in Advanced High-Strength Sheet Steels. Proceedings, pp. 295-303, Ronald E. Ashburn, USA [E2]
Kaynak, Akif and Hakansson, Eva (2008) Conducting polymers on fibres : applications on fibres, microwave transmission, complex permittivity, EMI shielding heat generation and stability of microwave properties, Proceedings of the International Conference on Advanced Textile Materials & Manufacturing Technology, pp. 351-357, Zhejiang University Press, Hangzhou, China [E2]
Li, Qing, Brady, Rex P. and Wang, Xungai (2008) Tensile behaviour of wool fabric as a function of fabric pH, Proceedings of the International Conference on Advanced Textile Materials & Manufacturing Technology, pp. 188-191, Zhejiang University Press, Hangzhou, China [E2]
McGregor, B. A. (2008) Current knowledge of the environmental influences on Australian cashmere production and quality, in Zhang, Zhi (eds), Proceedings of the 4th International Cashmere Identification Technique Symposium 2008, pp. 120-130, Inner Mongolia Erdos Cashmere Group, China [E2]
McGregor, B. A. (2008) Critical evaluation of cashmere nutrition experiments and suggestions for the design and conduct of successful experiments, in Zhi, Zhang (eds), Proceedings of the 4th International Cashmere Identification Technique Symposium 2008, pp. 315-331, Inner Mongolia Erdos Cashmere Group, China [E2]
Niu, Haitao, Lin, Tong and Wang, Xungai (2008) Needleless-electrospinning of PVA nanofibres, Proceedings of the International Conference on Advanced Textile Materials & Manufacturing Technology, pp. 192-196, Zhejiang University Press, Hangzhou, China [E2]
Sabirov, Ilchat, Timokhina, Ilana, Barnett, Matthew and Hodgson, Peter (2008) The microstructure evolution and mechanical properties of cryorolled Al alloys, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal Forming 2008 : Proceedings of the 12th International Conference on Metal Forming, pp. 190-194, Verlag Stahleisen GmbH, Duesseldorf, Germany [E2]
She, Fenghua, Nihara, K.*, Gao, Weimin, Hodgson, Peter, Jinnai, H.* and Kong, Lingxue (2008) 3-dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis, Papers presented at the conference on membranes in drinking water production and wastewater treatment, 20-22 October, Toulouse, France, pp. 1-8, MDIW, France [E2]
Timokhina, I. B., Pereloma, E. V.*, Beladi, H. and Hodgson, P. D. (2008) A study of the strengthening mechanism in the thermomechanically processed TRIP/TWIP steel, TMP 2008 : Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, pp. 1-10, Associazione Italiana Di Metallurgia, Padua, Italy [E2]
Wang, Jiangting, Hodgson, Peter Damian, Zhang, Jingde*, Yan, Wenyi* and Yang, Chunhui (2008) Effects of quenching rate on amorphous structures of Cu46Zr54 metallic glass, in Wang, Chengyong; Li, Xiaoping and Wang, Jun (eds), Proceedings of the 8th Asia-Pacific conference on materials processing, pp. 170-175, Frontiers of Design and Manufacturing, Riverwood, N.S.W. [E2]
Zhang, Junmin, Palmer, Stuart and Wang, Xungai (2008) Identification of cashmere and superfine merino wool with wavelet texture analysis, in Zhi, Zhang (eds), Proceedings of the 4th International Cashmere Identification Technique Symposium 2008, pp. 340-348, Inner Mongolia Erdos Cashmere Group, China [E2]
Zhang, L. C.*, Timokhina, I. B., La Fontaine, A.*, Ringer, S. P.*, Hodgson, P. D. and Pereloma, E. V.* (2008) Effect of pre-straining and bake hardening on the microstructure and mechanical properties of CMnSi trip steels, TMP 2008 : Proceedings of the 3rd International Conference on Thermomechanical Processing of Steels, pp. 1-10, Associazione Italiana Di Metallurgia, Padua, Italy [E2]
Chen, Xiaobo, Li, Yuncang, Wang, Xiaojian, Nouri, Alireza, Lin, Jianguo, Hodgson, Peter D. and Wen, Cui'e (2008) Apatite formation behaviors in different calcium phosphate solutions on titanium, WBC 2008 : Proceedings of the 8th World Biomaterials Congress, p. 1, Marathon International, Amsterdam, The Netherlands [E3]
Cicerale, Sara, Conlon, Xavier, Barnett, Neil, Sinclair, Andrew and Keast, Russell (2008) The influence of heat on biological activity and concentration of oleocanthal - a natural anti-inflammatory agent, Asia Pacific journal of clinical nutrition : proceedings of the Nutrition Society of Australia, HEC Press, Kent Town, S. Aust. [E3]
Fang, Jian, Wang, Hongxia, Niu, Haitao, Lin, Tong and Wang, Xungai (2008) Morphological evolution of nanofibers during electrospinning, in Ritter, Helmut; Geckeler, Kurt E. and Tabatabai, Monir (eds), MAM 2008 : Macro- and Supramolecular Architectures and Materials : Synthesis, Properties and Applications : Proceedings of the 4th International Symposium, pp. 171-172, Wiley-VCH Verlag GmbH & Co. KGaA, Dusseldorf, Germany [E3]
Hameed, Nishar and Guo, Qipeng (2008) Self-assembled block copolymer complexes via competitive hydrogen bonding, APS 2008 : The 30th Australasian Polymer Symposium Program, pp. 260-261, 30APS, Melbourne, Vic. [E3]
Kafi, Abdullah A., Hurren, Christopher J. and Fox, Bronwyn L. (2008) Influence of helium atmospheric plasma treatment on surface and fracture-mechanical behaviour of quickstepTM cured bio-composites, Proceedings of the 4th international conference on advanced engineered wood & hybrid composites, p. 1, The University of Maine, Bar Harbor, Me. [E3]
Niu, Haitao, Lin, Tong and Wang, Xungai (2008) Disk-electrospinning of PVA nanofibres, The Fiber Society : 2008 spring conference : May 14-16, 2008 University de Haute Alsace Mulhouse, France, pp. 15-16, The Fiber Society, Raleigh, N.C. [E3]
Rolfe, Bernard, Asgari, Alireza and Hodgson, Peter (2008) The forming of advanced high strength steels for the automotive industry, in Pietrzyk, Maciej; Kusiak, Jan; Majta, Janusz; Hartley, Peter; Lin, Jianguo and Mori, Kenichiro (eds), Metal forming 2008 : [proceedings of] the 12th International Conference on Metal Forming 2008, Akademia Górniczo-Hutnicza, Kraków, Poland, September 21-24, 2008, pp. 9-18, Verlag Stahleisen [E3]
Wang, X. J., Yamada, Y.*, Xiong, J. Y., Chen, X. B., Li, Y. C., Lin, J. G., Hodgson, P. D. and Wen, C. E. (2008) Influence of interfacial structure on the bond strength of apatite layer on titanium substrate, WBC 2008 : Proceedings of the 8th World Biomaterials Congress, p. 1, Marathon International, Amsterdam, The Netherlands [E3]
Wen, Guiqing, Brady, Peter, Rippon, John, Wang, Xungai, Liu, Xin and Cookson, Peter (2008) Adsorption of dye by powdered wool, The Fiber Society : 2008 spring conference : May 14-16, 2008 University de Haute Alsace Mulhouse, France, pp. 1-2, The Fiber Society, Raleigh, N.C. [E3]
Wen, G., Wang, X., Liu, X. and Cookson, P. (2008) The reactivity of powdered wool, Fibrous Proteins : Transforming Structural Knowledge into New Materials, p. 1, CSIRO, Melbourne, Vic. [E3]
Xiong, Jianyu, Li, Yuncang, Lin, Jianguo, Hodgson, Peter D. and Wen, Cui'e (2008) Hydroxyapatite/Titania sol-gel coatings on porous titanium-niobium shape memory alloy for bone implants, WBC 2008 : Proceedings of the 8th World Biomaterials Congress, pp. 407-408, Marathon International, Amsterdam, The Netherlands [E3]
Zhou, Yaqiong, Lin, Tong and Wang, Xungai (2008) Preparation of nanofibre yarns from electrospun nonwoven strips, APS 2008 : The 30th Australasian Polymer Symposium Program, pp. 131-132, 30APS, Melbourne, Vic. [E3]
Wang, Jinfeng, Tsuzuki, Takuya and Sun, Lu (2008) Optimizing the UV protection of textile with reduction of photocatalytic activity of ZnO, ARNAM 2008 annual workshop : conference booklet : Waurn Ponds Campus, Deakin University, 15 - 18, December 2008, p. 171, Deakin University [E3.1]
Lin, Tong, Wang, Hongxia, Fang, Jian and Wang, Xungai (2008) Superhydrophobic fabrics prepared by silica coating, Proceedings of the Fiber Society Spring Conference 2008, pp. 48-49, The Fiber Society, Mulhouse, France [EN]
Grants and Consultancies
Grants with funding during 2008
Research Income - National Competitive Grants
Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]
- 2008: $47,685
Hodgson, P, Rolfe, B and Yang, C. Design Strategy for Cold Roll Formed Products, Australian Research Council Collaborative - Linkage - Projects (Round 2, APAI) [T]
- 2008: $38,250
Muddle, B*, Hodgson, P, Schaffer, G*, Ferry, M*, Ringer, S*, Xia, K*, Nie, J*, Davies, C*, Hutchinson, C*, Barnett, M, Dahle, A*, Caceres, C*, Hoffman, M*, Dunlop, G*, Couper, M*, Embury, J*, Loretto, M*, Humphries, F*, Arnberg, L*, Estrin, Y*, Fraser, H* and Brechet, Y*. Design in Light Metals, Australian Research Council Centre - Centres of Excellence [T]
- 2008: $609,384
- 2007: $497,330
- 2006: $497,330
Mai, Y* and Guo, Q. Nanostructure Design and Toughening of Novel Thermosets, Australian Research Council Grant - Discovery Projects [T]
- 2008: $89,532
Hodgson, P, Beynon, J*, Strezov, L*, Stanford, N, Dippenaar, R*, Sietsma, J* and Thijsse, B*. Development of new steel products by thin strip casting and direct thermomechanical processing, Australian Research Council Grant - Discovery Projects [T]
- 2008: $149,000
Wang, X. Improving production efficiency, quality and value-adding of rare natural fibres, Rural Industries Research and Development Corporation Grant - Research [T]
- 2008: $28,000
Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]
- 2008: $119,676
- 2007: $58,664
Kong, L, She, M and Trengove, R*. Feedwater characterisation, Commonwealth Scientific and Industrial Research Organisation Flagship Collaboration Research Fund [T]
- 2008: $123,548
- 2007: $120,237
Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures, ARC_Deakin University Australian Postgraduate Award Industry Second Collaborative - Linkage - Projects (Round 2, APAI, APDI) [T]
- 2008: $69,288
- 2007: $78,047
- 2006: $182,166
Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness, Australian Research Council Collaborative - Linkage - Projects (Round 2) [T]
- 2008: $72,457
- 2007: $73,597
- 2006: $36,696
Hodgson, P. Advanced products through multiscale microstructure engineering, Australian Research Council Fellowship - Discovery - Federation Fellowship [T]
- 2008: $329,089
- 2007: $322,625
- 2006: $316,222
Kelly, G, Pigram, P* and Fox, B. Optimising paint adhesion to polymers, Australian Research Council Collaborative - Linkage - Projects (Round 1, APAI, APDI) [T]
- 2008: $110,360
- 2007: $104,915
- 2006: $94,417
Wang, X and Hurren, C. A study into the methods of cleaning wool, Australian Wool Innovation Limited Grant - Research [T]
- 2008: $12,000
- 2007: $14,000
- 2006: $28,000
Wen, C, Yan, W* and Nicholson, G*. Titanium Alloy Scaffolds for Osseointegration Implant Materials, Australian Research Council Grant - Discovery Projects [T]
- 2008: $84,469
- 2007: $82,227
Lin, T and Wang, X. A New Chlorine-Free Shrink Proofing Technology - A Feasibility Study, Australian Wool Innovation Limited Grant - Research [T]
- 2008: $47,500
Wang, X and Cookson, P. Optimizing the UV Protection of Textiles with Nano Zinc Oxide., Australian Research Council Collaborative - Linkage - Projects (Round 1) [T]
- 2008: $148,460
- 2007: $145,549
- 2006: $142,660
Barnett, M. Modelling twinning transitions in light metals: a new foundation for alloy and process development, Australian Research Council Grant - Discovery Projects [T]
- 2008: $115,391
- 2007: $113,125
- 2006: $110,880
Kaynak, A. PhD Scholarship - Novel Conducting Polymer Films and Coated Textiles, Australian Wool Innovation Limited Scholarship [T]
- 2008: $24,181
- 2007: $5,000
- 2006: $11,000
Muddle, B*, Hodgson, P and Barnett, M. Victorian Support Funding for the Victorian Facility for Design in Light Metal Surface Technology, Department of Innovation, Industry and Regional Development Grant - Centre of Excellence Project [T]
- 2008: $139,333
- 2007: $235,000
Barnett, M, Godet, S*, Yue, S* and Jonas, J*. Mechanisms for Improved Ductility of Magnesium Alloys, Australian Research Council Collaborative - Linkage - International [T]
- 2008: $15,498
- 2007: $15,000
Wang, X, Cookson, P, Kikutani, T* and Gao, X*. Advanced polymer fibres with multiple functionalities, Australian Research Council Collaborative - Linkage - International [T]
- 2008: $8,327
- 2007: $15,000
Research Income - Other Public Sector Funding
Tsuzuki, T, Wang, X and Zhang, L. Biomaterials and functional textiles [U]
- 2008: $50,000
Wang, X. Selective sequestering of heavy metal and actinide ions by biopolymer powders derived from silk biopolymer powder derived from silk fibres [U]
- 2008: $13,000
Wang, L, Lin, T, Cookson, P, Hurren, C and Wang, X. Performance fibres and textiles [U]
- 2008: $8,000
- 2007: $72,000
Lin, T. GHD Early Researchers Award [U]
- 2008: $4,545
Research Income - Industry and Other Funding - Australian
Wang, X, Lin, T and Tsuzuki, T. Value Adding to Australian Cashmere Fleece [V.1]
- 2008: $15,000
Hodgson, P. Development and Implementation of a Project for Knowledge Capture and Improved Process Capability in Automotive Casting Technology [V.1]
- 2008: $25,000
- 2007: $60,000
- 2006: $50,000
Lin, T, Zhao, Y, Wang, X and Kirkland, M*. Three-Dimensional Polymer Fibre Scaffolds with Functional Nano-structured Surface [V.1]
- 2008: $50,000
Hodgson, P and Fabijanic, D. Novel Fluidised Bed Duplex Surface Treatments for Ferrous Materials [V.1]
- 2008: $61,732
Hodgson, P, Cardew-Hall, M*, Pereloma, E*, Dingle, M, Timokhina, I, Rolfe, B and Timokhina, I*. Developing Light Weight Automotive Structures [V.1]
- 2008: $25,872
- 2007: $95,761
- 2006: $77,880
Wang, X and Wang, L. Understanding the Drafting-against-Untwisting Process for Engineering Fine and Soft Yarns of Low Hairiness [V.1]
- 2008: $10,000
- 2007: $40,000
Lin, T and Wang, X. PhD Scholarship - Ian Heritage Scholarship [V.1]
- 2008: $20,000
- 2006: $40,000
Wen, C. Victorian Centre for Advanced Materials Manufacturing (VCAMM round 2/3): Development of Scaffold metal alloys for biomedical applications [V.1]
- 2008: $76,725
- 2007: $200,475
Research Income - Industry and Other Funding - International B (Other Income)
Hodgson, P and Dingle, M. Predicting tool life issues of AHSS stampings. [V.3]
- 2008: $44,881
Research Income - Other Funding Sources
Frayman, Y. Melt Handling and Dross Generation, Department of Education, Science and Training Cooperative Research Centre [X]
- 2008: $36,674
- 2007: $81,677
Barnett, M. Wrought Magnesium Alloys Development, Department of Education, Science and Training Cooperative Research Centre [X]
- 2008: $200,249
- 2007: $84,094
Hilditch, T. Auto CRC project C1-18: Tool Wear Prediction, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]
- 2008: $162,614
Hilditch, T and Hodgson, P. Auto CRC - MDO C4-04, Department of Education, Science and Training Cooperative Research Centre [X]
- 2008: $20,132
Hodgson, P and Nikhare, C. The development of low cost, complex shapes from advanced high strength steels using low pressure hydroforming, Department of Education, Science and Training CRC for Advanced Automotive Technology [X]
- 2008: $8,000
Higher Degree by Research Completions
2008 - Doctor of Philosophy
Timothy Corbett. Supervisor: Bronwyn Fox
Thesis entitled: Characterization and Development of the Quickstep™ Melding Process.Chuanming Deng. Supervisor: Lijing Wang
Thesis entitled: A Study on Within-fibre Diameter Variation of Wool.Zohreh Keshavarz. Supervisor: Matthew Barnett
Thesis entitled: EBSD Analysis of Deformation Modes in MG-3A1-1Zn.Minoo Naebe. Supervisor: Xungai Wang
Thesis entitled: Carbon Nanotube Polymer Composites and Nanofibres: Influence of Polymer Morphology.Alireza Nouri. Supervisor: Cui'e Wen
Thesis entitled: Novel Metal Structures through Powder Metallurgy for Biomedical Applications.Adnan Teletovic. Supervisor: Peter Hodgson
Thesis entitled: Turbulent Filling of Iron Castings.Junmin Zhang. Supervisor: Xungai Wang
Thesis entitled: Objective Evaluation of Fabric Pilling Propensity.2008 - Master of Engineering
Fabian D’Souza. Supervisor: Bernard Rolfe
Thesis entitled: "Improving Stamping Tryout using Variational Analysis, FE Simulations and Robustness".Simon Jacob. Supervisor: Matthew Barnett
Thesis entitled: Low Temperature Formability of Differently Processed AZ31B Magnesium Alloy Sheets.
- Legend:
- * Not a member of Deakin University at time of output.
DRO to publications collection last synchronised: Tuesday 18th June 2013 10:04pm
